lathe safety final

9
Lathe Safety

Upload: garfield-tulloch

Post on 08-Jan-2017

23 views

Category:

Education


0 download

TRANSCRIPT

Page 1: Lathe safety final

Lathe Safety

Page 2: Lathe safety final

Safety on the Lathe

• The lathe is a machine that is used for producing cylindrical work.

• Safety is a method or process put in place to prevent injury from happening.

• The lathe machine can cause serious injury therefore safety rules on the machine must be observed.

Page 3: Lathe safety final

Safety

• Be aware of safety requirements in any area of shop

• Always attempt to observe safety rules• Failure results in:– Serious injury– Resultant loss of time and pay– Loss of production to company

Page 4: Lathe safety final

Safety Precautions

• Some of the safety rules include: keep machine and surrounding area clean and

tidyAlways wear approved safety glassesRollup sleeves, remove tie and tuck in loose

clothingNever wear ring or watch

Page 5: Lathe safety final

Safety Precautions Con’tDo not operate lathe until understand controlsNever operate machine if safety guards removedStop lathe before measure work or clean, oil or

adjust machineDo not use rag to clean work or machine when

in operation Rag can get caught and drag in hand

Page 6: Lathe safety final

Safety Precautions Con’t

• Never attempt to stop a lathe chuck or drive plate by hand

• Be sure chuck or faceplate mounted securely before starting– If loose, becomes dangerous missile

• Always remove chuck key after use–Fly out and injure someone–Become jammed, damaging wrench or lathe

Page 7: Lathe safety final

Safety Precautions Con’t

• Move carriage to farthest position of cut and revolve lathe spindle one turn by hand–Ensure all parts clear without jamming–Prevent accident and damage to lathe

• Keep floor around machine free from grease, oil, metal cuttings, tools and work pieces–Oil and grease can cause falls–Objects on floor become tripping hazards

Page 8: Lathe safety final

Safety Precautions Con’t

• Avoid horseplay at all times• Always remove chips with brush–Chips can cause cuts if use hands–Chips become embedded if use cloths

• Always remove sharp tool bit from tool holder when polishing, filing, cleaning, or making adjustments

Page 9: Lathe safety final

• Safety is important keep safe