leather strap tote bag by rachel faucett for weallsew

Upload: weamnorafashion

Post on 03-Apr-2018

222 views

Category:

Documents


0 download

TRANSCRIPT

  • 7/28/2019 Leather Strap Tote Bag by Rachel Faucett for WeAllSew

    1/9

    materials and tools

    1

    LeatherStrap

    Tote

    materials and tools

    Created by Rachel Faucett

    1 yards of fabric for the bag top

    18 x 24 rectangle of contrast fabric

    for the bag base

    3x 20

    strip of faux leather for the

    handle

    One package (approximately 60) of

    extra-wide double-fold bias binding

    (or make your own!)

    Clear quilters ruler

    Fabric marker

    Thread

    Scissors

    Classic design meetsmodern twist. This cooltote with boxed bottomcan carry anything youthrow at (or in) it. Theleather strap simplifi es

    the design and accentu-ates your style.

    Clean, classic lines meanits easy to construct, soyou go from zero to tote-and-go in less t ime. Itwont be long before this

    becomes your go-to tote.

    Print the pattern piece templates (pages 6-9).

    The bag top is split into three pieces; cut them out and tape

    them together before cutting out your fabric pieces!

    step one

  • 7/28/2019 Leather Strap Tote Bag by Rachel Faucett for WeAllSew

    2/9

    2

    LeatherStrap Tote

    step four

    Press the seam allowances towards the bottom of the bag.

    step three

    Stitch the bottom

    to the top for each

    side of the bag using

    -wide seam

    allowances.

    step two

    Iron your fabric, then cut

    out the bag tops (2) and

    bag bottoms (2).

    Topstitch the edge of the base seam on each side. I used

    decorative stitch #401 on my BERNINA 580 E, with a width

    of 7.1 mm and length of 5.1 mm. Experiment with decorative

    stitches, or keep it simple with just a straight stitch.

    step five

  • 7/28/2019 Leather Strap Tote Bag by Rachel Faucett for WeAllSew

    3/9

    3

    LeatherStrap Tote

    step eight

    Cut the squares from the corners of the bag base.

    step seven

    Using a clear quilters ruler, measure in 1 at the corners

    of the base of the bag as shown; mark with a fabric pen.

    step six

    With right sides together, stitch the side and bottom edges of

    the bag using a -wide seam allowance.

    Press the seam allowances open.

    With the bag still inside out, pinch the cut-out edges together

    as shown, making sure the previously sewn seams are

    pressed open. Pin in place.

    step nine

  • 7/28/2019 Leather Strap Tote Bag by Rachel Faucett for WeAllSew

    4/9

    4

    LeatherStrap Tote

    step twelve

    Sew the binding to the bag, stitching close to the edge of the

    binding (a scant) as shown.

    step eleven

    step ten

    Sew the corner edges

    together with -wide

    seam allowances.

    This will create nice

    boxed corners on the

    base of your bag.

    On one side of the top edge of your bag, pin the bias binding

    in place.

    For the second half of the binding, start by opening the

    binding at its main crease and folding the corners in slightly

    as shown.

    Then fold the end under ; press.

    step thir teen

  • 7/28/2019 Leather Strap Tote Bag by Rachel Faucett for WeAllSew

    5/9

    5

    LeatherStrap Tote

    step sixteen

    To attach the handle to the bag, pin it to the points of the

    bag as the desired length.

    Stitch-in-the-ditch beside the binding and across the

    bottom of the handle, creating a triangle shape as shown.

    To make sure those handles are nice and secure, go over

    your stitching again about three times.

    step fourteen

    Pin the binding in place, then repeat the above folding

    technique once you reach the other edge on the point of the

    bag, overlapping the ends.

    Stitch the binding in place as you did in step eleven.

    step fif teen

    For the handle, fold the leather strip in half lengthwise;

    press (check a scrap first to make sure it wont melt).

    Fold under each outer edge ; press.Finally, fold press

    the center crease again with all edges turned under.

    Stitch the open edges of the strap together close to the

    edge (a scant), making sure you catch both sides of the

    strap in your stitches.

    Voila!Yoursweetlittlemarkettotebagiscomplete!Enjoy!

  • 7/28/2019 Leather Strap Tote Bag by Rachel Faucett for WeAllSew

    6/9

    LeatherStra

    p

    Tote

    LeatherStrapTote

    PatternTemplates

    Leather Strap Tote

    TopPart 1 of 3

    JoinHere

    Tape the three

    Top sections

    1, 2, and 3together.

    Af ter join ing the top

    pieces together, cut

    two tops on the fold.

    Join pieces,

    then cut

    on fold

    =

    ++

  • 7/28/2019 Leather Strap Tote Bag by Rachel Faucett for WeAllSew

    7/9

    Leather Strap Tote

    TopPart 2 of 3

    JoinHere

    JoinHere

    Le

    atherStrap

    Tote

    LeatherStrapTotePatternTemplates

    Join pieces, then cut on fold

  • 7/28/2019 Leather Strap Tote Bag by Rachel Faucett for WeAllSew

    8/9

    Leather Strap Tote

    TopPart 3 of 3

    JoinHere

    LeatherStrap

    Tote

    LeatherS

    trapTotePatternTemp

    lates

    Join pieces, then cut on fo ld

  • 7/28/2019 Leather Strap Tote Bag by Rachel Faucett for WeAllSew

    9/9

    Leather Strap Tote

    Bottomcut 2 on fold Le

    atherStrap

    Tote

    LeatherStrapTotePatternTemp

    lates

    Cutonfold