lighting - custom bikes by mike 5.pdf · 2019. 11. 29. · lighting electrical exhaust intake...

For the Dealer Nearest You, Call: 800-729-3332

Lighting

5

5

Lig

htin

g

5.02

Headlight & Spotlamp Housing Kits

5

Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Doss Custom Teardrop HeadlightHousing KitsHearken back to the days of yore at the begin-ning of the Hot Rod phenomenon. At drive-insand on dark two-lane blacktop roads all overAmerica, Rodders would meet to settle the scoreon who was fastest, which car was the best look-ing and which one the girls liked the best. Lots ofthose early Hot Rods were pre-war (WWII that is)Fords with rowdy V-8s and distinctive Teardropfront headlights. Jump forward to modern two-wheel Hot Rods and you can easily imagine theinspiration for the latest masterpiece by Rick Doss.It combines the popularity of 1950’s-vintage alu-minum headlight housings and the teardropshape of the early Ford headlight into one dyna-mite, bolt-on kit. Special asymmetrical reflector complete with halogen bulb was designed to put lighton the road just where you want it. Complete with all necessary components, brackets and hardwarebeautifully chrome-plated and ready to add a distinctive Hot Rod look.46534 For FL Softail® models from 1986 to present and custom bikes with late FLST front ends .$338.79

46336 For 4-speed FL models 1960 thru 1984 and custom bikes using early FL front ends . . . . . . .$314.59

46334 Retro-fit kit for FL Softail® models already equipped with the original Doss Headlight Conversion kit (CC #26890) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$261.29

U.S. Design Patent#D423,126

Doss V-Style Spotlamp BracketsTired of the ‘sagging hammock’ look of factory spotlamp brackets? Here’s a V-stylishalternative!46654 Fits with Doss teardrop headlight

housing kit (CC #46534) . . . . . . . . . .$81.19

Replacement Parts46368 Teardrop headlamp assembly

(uses H4 bulb, not included) . . . . . .$59.99

92208 Nacelle trim strip . . . . . . . . . . . . . . . . .$45.99

92163 Chrome outer trim ring . . . . . . . . . . .$39.99

Doss Custom Teardrop Headlightand Spotlamp KitsThese complete assemblies are the easy way toadd a whole new look to any stocker or custom.They are complete with a full teardrop headlighthousing conversion with all the hardware, a pairof matching teardrop spotlamps with built-inL.E.D. marker lights and a cool V-style spotlampmounting bracket. The marker lights can bewired to flash with your turn signals and as a run-ning light. These Rick Doss designed kits are theeasy and affordable way to make your scoot stickout in a crowd.620996 Fits FL Softail® models from 1986

to present and custom builds using FLST front ends . . . . . . . . . . . . . . . .$605.99

620995 Fits 4-speed FL models from 1960 thru 1984 and any custom using early style FL front ends . . . . . . . .$614.99

62412 Replacement amber LED turn signal lamp assembly (sold each) . . . . . . .$14.99

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline

Wheels,Tires & Brakes

Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.03

Headlight Housings


Doss Headlight Conversion Kits for FL Softail® Models• These are the original kits – still the best and most popular with builders.

Other kits on the market are but poor imitations of Custom Chrome’sattention to detail, excellent fit and craftsmanship

• Each piece is hand-polished and chrome-plated in the USA for unmatched quality

Includes the two-piece aluminum head lamp housing, all mounting brackets,headlight bucket, hardware, chrome slider covers, covers for the lower tripletree and handlebar risers. Bolts directly to the existing Original Equipmenttriple trees.

Kit For FL Softail® ModelsFor all Heritage Softail® and Fat Boy® models from 1986 to present (exceptFLSTS models). Optional Spotlamp Mounting Bar kit replaces the OEM spot-lamp bar on Heritage Softail® Classic models to mount existing spotlamps and turn signals to the headlight conversion kit.26890 Headlight housing conversion kit . . . . . . . . . . . . . . . . . . . . . . . . . . . .$519.99

26899 Optional spotlamp mounting bar kit (includes mounting bar, spacers, spotlamp/turn signal clamps and chrome hardware) . .$65.89

Replacement Parts26892 Mounting brackets (sold each) . . . . . . . . . . . . . . . . . . . . .$7.69

26893 FL headlight mount (black) . . . . . . . . . . . . . . . . . . . . . . .$59.99

26894 FL headlight bucket (black) . . . . . . . . . . . . . . . . . . . . . . .$30.49

26895 Chrome riser cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.99

26896 Chrome lower triple tree under cover . . . . . . . . . . . . .$39.99

26897 Chrome right slider cover . . . . . . . . . . . . . . . . . . . . . . . . .$39.99

26898 Chrome left slider cover . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99

26536 Chrome FL head lamp housing . . . . . . . . . . . . . . . . . . .$289.99

26526 Sealed beam retaining ring . . . . . . . . . . . . . . . . . . . . . . .$25.84

26535 Chrome outer trim ring and seal . . . . . . . . . . . . . . . . . .$22.79

12555 Spotlamp mounting bar ONLY . . . . . . . . . . . . . . . . . . . .$65.59

Note: Early style windshields and brackets should be used with aluminum headlight kits.

26890

Doss Custom 7" HeadlightsInnovative design by Rick Doss has interesting raised rib detail on the sides ofthe housing to match up with those on the Original Equipment fork tins.Includes mounting block and hardware for a bolt-on fit to FL Softail® modelsfrom late 1986 to present. Also available in a smooth version to replace thestock unit.30120 Ribbed 7" headlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$124.99

30121 Smooth 7" headlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$124.99

Lig

htin

g

5.04

Headlights

5


Ness-Tech® Billet HeadlightsLooks sleek and mean. CNC-machined from6061-T6 billet aluminum. Features an innovativeheadlamp retaining system that means noexposed mounting hardware to spoil the look.Designed for 53/4" headlight applications. Willwork in most bottom mount applications.05327 Smooth . . . . . . . . . . . . . . . . . . . . . . . .$299.95

05328 Grooved . . . . . . . . . . . . . . . . . . . . . . .$309.95

Note: Headlight sealed beams not included

Ness-Tech® Billet HeadlightsLean, mean looks are just part of the beauty of this Arlen Ness® design. Top-quality CNC-machinedbillet also provides unique engineering thatincludes a threaded headlight retaining ring toeliminate exposed mounting hardware. Halogenlamp not included.05966 53/4" smooth . . . . . . . . . . . . . . . . . . . . .$359.90

05967 53/4" grooved . . . . . . . . . . . . . . . . . . . . .$370.00

05968 7" smooth . . . . . . . . . . . . . . . . . . . . . . . .$399.95

05969 7" grooved . . . . . . . . . . . . . . . . . . . . . . .$399.95

Extended Mounting Block05769 For most Original Equipment

bottom mount triple trees . . . . . . . . .$29.95

46473

46474Doss Custom Dual Headlight KitsThe easiest way to bolt-on an eye catching customlook in minutes. 41/2" headlights attach to aribbed billet aluminum mounting block withaccents. Kits are available with ribbed or smooth41/2" dual beam headlights. For 1980 to presentFXST, FXWG and FXDWG models. Includes brack-ets, mounting blocks and hardware.

46473 Kit with smooth headlights . . . . . . .$216.99

46474 Kit with ribbed headlights . . . . . . . .$244.99

Replacement Parts (sold each)46475 Headlight mounts . . . . . . . . . . . . . . . . . .$9.79

62018 Headlight bracket . . . . . . . . . . . . . . . .$107.99

26400 41/2" sealed beam . . . . . . . . . . . . . . . . .$13.99


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.05

Headlights

Custom Bottom Mount HeadlightAssemblies and Headlight Trim RingsOur 53/4" bottom-mount headlight assemblies feature an innovative trim ring design with a halogen sealed beam or aprecision-ground, flat lens halogen lamp with a replaceable55/60 watt bulb. The trim ring is also available separately.

Complete Assemblies with Smooth Rims08503 With flat lens halogen lamp . . . . . . . . . . . . . . . . . . .$90.99

08505 With halogen sealed beam . . . . . . . . . . . . . . . . . . . .$52.99

Custom Headlight Rim ONLYFor most bottom or side-mount 53/4" housings.08501 Smooth rim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99

08503

3100131008

31005

31016

3101431015

31004

Chrome Billet Headlights by Headwinds™

Show-quality ‘Classic’ headlights are preci-sion-machined with recessed or visoredretaining rings. Housing designs are‘Grooved’ with scalloped lines all the wayaround the top half of the shell, and‘Smooth.’ Each unit includes an integrated3/4" bottom mount.

‘Classic’ HeadlightsSmooth Grooved31001 53/4" with recessed ring . . . .$343.34 31002 53/4" with recessed ring . . .$363.99

31007 7" with recessed ring . . . . . .$408.84 31008 7" with recessed ring . . . . . .$457.79

31004 53/4" with visored ring . . . . .$405.79 31005 53/4" with visored ring . . . . .$447.34

31010 7" with visored ring . . . . . . .$471.34 31011 7" with visored ring . . . . . . .$520.24

‘Rocket’ HeadlightsThe ‘Rocket’ design is similar to the ‘Classic’ smooth, but features a deeper bucket.31054 53/4" Bradley Rocket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$372.44

31055 53/4" Mariah Rocket with visor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$436.99

‘Tradewinds™’ HeadlightsChrome-plated aluminum headlights that are manufactured offshore to be a lower costalternative to the regular Headwinds offerings. They’re precision-machined with recessedor visored retaining rings. Smooth or grooved styles with integrated 3/4" bottom mount.Smooth Grooved31050 53/4" with recessed ring . . . .$214.99 31051 53/4" with recessed ring . . .$233.69

31052 53/4" with visored ring . . . . .$222.99

Chrome Billet Headlight Mounting Blocks31013 For custom applications. 3/4" mount with 1" vertical offset . . . . . . . . . . . . . . . .$45.24

31014 For stock-style Wide Glide® triple trees (FXWG, FXST, FXDWG) . . . . . . . . . . . . . .$29.59

31016 For Springer Softail® models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$57.49

31015 For all FL Softail® models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32.64Note: Mounting block CC #31015 is required to mount CC #’s 31007 thru 31011 headlights on FL Softail® models.

31050

31054 31055

Dual Halogen Headlight KitsChrome 4" headlight kits include lights, bracket, mountingblocks and all necessary hardware. They feature replaceable H4 60/55 watt halogen bulbs and low-wattage daylight running lamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$139.9927913 Fits Dyna Wide Glide® models from 1993 to present

and FX Softail® models from 2000 to present (exceptDeuce™ models)

27914 Fits FX Softail® and 4-speed FXWG models from 1980to present

Custom Chrome® 7" Headlight AssembliesFaithful stock reproductions fitted with 12-voltquartz halogen or standard sealed beams.Includes a chrome mounting bracket. Easilyadapted to many universal applications or latemodel triple trees for a distinctive classic look.26477 Complete assembly with quartz

halogen 12-volt sealed beam . . . .$75.99

26473 Complete assembly with standard12-volt sealed beam . . . . . . . . . . . . .$60.99

7" Headlight ComponentsThe precision of our 7" headlight reproductionallows use of component parts for restoration.26466 7" headlight housing . . . . . . . . . . . .$48.29

26463 7" headlight inner ring . . . . . . . . . .$11.69

26464 7" headlight outer ring . . . . . . . . . .$22.14

26491 Headlight bracket . . . . . . . . . . . . . . .$15.49

93146 Retaining clip for rubber seal (pack of four) . . . . . . . . . . . . . . . . . . . .$4.99

26420 Quartz halogen sealed beam (12-volt) . . . . . . . . . . . . . . . . . . . . . . . . .$16.99

15089 Standard 6-volt sealed beam . . . . .$10.99

15090 Standard 12-volt sealed beam . . . . .$8.19

Chrome Headlight Housing for European CountriesPermits the use of Custom Chrome® headlightassemblies with ECE approved inserts inEuropean countries. Each shell comes withmounting bracket, outer and inner ring, andbulb socket. Sold each without inserts.85004 7" headlight housing ONLY . . . . . .$43.99

Headlight Inserts with TÜV Approval for European CountriesECE-approved inserts for all headlights and spot-lamps for use in European countries. Availablefor right hand traffic also. Units do not includethe bulb. Sold each.85795 12-volt, H4 unit . . . . . . . . . . . . . . . . .$33.49

85017 12-volt, H4 unit, right hand traffic only, by Bosch® . . . . . . . . . . . . . . . . .$129.39

Bulb Retainer Spring85575 Fits H4 inserts for 7" headlight

assemblies . . . . . . . . . . . . . . . . . . . . . . .$6.29

Lig

htin

g

5.06

Headlights

5


Chrome Headlight AssembliesChrome duplicates of the Original Equipment 12-volt headlights.12499 For Sportster®, FX and FXR models 1975 thru 1989

(repl. OEM 67705-74) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.99

12500 For Sportster® models from 1963 thru 1974, and FX models from 1971 thru 1974 (repl. OEM 67733-72) $41.99

Replacement Parts12501 Chrome rim set (repl. OEMs 67725-63, 67744-75)

sold in pairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.79

12502 Rubber seal only (repl. OEM 67719-63) . . . . . . . . . . . . .$5.79

Custom TeardropHeadlightAdds a Hot Rod look to any bike.Includes teardrop shaped chromehousing complete with H4 halogenlight and chrome billet mount.Works in most bottom mountapplications. . . . . . . . . . . . . . . .$239.9903201 DOT approved headlight

Chrome Billet ‘Trim Rim’Headlamp AssemblyLean, clean styling in a chrome-plated 53/4" headlight assemblymachined from billet aluminumwith an extra-thin rim design.Includes the mounting block andsealed beam.07340 Headlight . . . . . . . . .$161.99

640088 Replacement lamp .$35.70

Xenon H.I.D. 7" HeadlightHigh intensity discharge lighting provides unmatched lightingperformance, greatly extended life and resistance to shockand vibration!• Features separate bulbs for hi beam and low beam usage,

12V nominal input voltage and service life of approximate-ly 3500 hours

• Special reflector optics utilize a Xenon bulb to producefour times the light output and ten times the life of con-ventional headlight!

• Xenon bulb contains no filament which eliminates thebreakage from shock and vibration

• Produces daylight color impression, so items are more visible and easier to recognize

• Includes waterproof headlight control module to adapt theheadlight to your current lighting system. Module can bewired to have Xenon light ignite after bike has been start-ed or when ignition switch is turned on

Fits in Most 7" Round Headlamp Housings (slight modification of headlamp housing may be required on some models)661000 H.I.D. headlight kit . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.99

661001 Mounting ring kit for nacelles . . . . . . . . . . . . . . . . .$99.99

661002 Replacement H.I.D. bulb . . . . . . . . . . . . . . . . . . . . . .$214.99

661003 Replacement H8 high beam bulb . . . . . . . . . . . . . . .$21.99

661000661001

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.07

Headlights


46349

4630546306

Doss HeadlightsGreat choices in custom headlights with distinctive bottom mount housings with 41/2" or 53/4" sealed beams. The41/2" in the small shell and 53/4" in the large shell have innovative ‘Frenched’ trim rings for a super custom look.46305 Small ribbed shell, 41/2" headlamp ‘Frenched’ trim ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99

46349 Small ribbed shell, 53/4" headlamp standard trim ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$105.99

46306 Large smooth shell, 53/4" headlamp ‘Frenched’ trim ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$129.99

26400 Replacement 41/2" sealed beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99

Custom Chrome® Headlight Assemblies53/4" HeadlightsShow-chrome custom 53/4" headlights are available with sideor bottom mounts. They all have high-beam indicator lights,and include mounting hardware.12504 12-volt bottom mount . . . . . . . . . . . . . . . . . . . . . . . . .$34.94

12497 12-volt bottom mount with halogen . . . . . . . . . . .$42.49

12506 12-volt side mount . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.94

Replacement Parts12960 Outer chrome ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99

12509 Outer ring nut (pack of 10) . . . . . . . . . . . . . . . . . . . . .$6.49

19643 Bottom mount hardware . . . . . . . . . . . . . . . . . . . . . . .$5.99

12520 High-beam bulb (#53) pack of 10 . . . . . . . . . . . . . . .$6.49

Custom Chrome® 41/2" Mini LightsDesigned for extra lighting on safety bars. Rated at 30 wattswith 10,000 candlepower. 12-volt with high-low beam andindicator light. Includes swivel stud mounting bracket.26399 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.49

26400 Replacement 12-volt sealed beam . . . . . . . . . . . . . .$13.9926399

12504

12506

Custom Chrome® Headlight and Spotlamp Housingsfor European CountriesChrome-plated headlight and 41/2" spotlamp housings that permit the useof Custom Chrome® headlight assemblies with ECE approved inserts inEuropean countries. To properly install the 41/2" spotlamp inserts, you mustalso purchase one of the O-ring sets listed separately. Each housing comeswith mounting block, outer and inner ring, bulb socket and blue high-beamindicator light. Without inserts. Sold each.

Housings ONLY85033 41/2" headlight housing, bottom mount . . . . . . . . . . . . . . . . . . . . . .$#N/A

85036 53/4" headlight housing, bottom mount . . . . . . . . . . . . . . . . . . . . . .$23.69

85037 53/4" headlight housing, side mount . . . . . . . . . . . . . . . . . . . . . . . . .$31.99

85034 41/2" late-style spotlamp housing . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.49

Parts for Headlight Housings12960 Chrome outer ring only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99

12509 Chrome ring nut only (pack of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49

19643 Bottom mounting hardware only . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99

Parts for Spotlamp Housings12481 Spotlamp rim only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.99

85022 O-ring set for aftermarket late-style spotlamps TÜV approved) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.49

85021 O-ring set for Original Equipment spotlamps (TÜV approved) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.49

Lig

htin

g

5.08

Headlights

5


Springer Headlight for Early ModelsExacting 61/2"-diameters replicas of the stock headlamps usedfrom 1936 thru 1954. Perfect fit of the complete unit, or useany of the replacement parts for restoration. Chrome orblack-painted finishes with chrome bezels.

Chrome Headlight Assemblies12537 12-volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66.19

12538 6-volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66.19

Black Headlight Assemblies12539 12-volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66.19

12540 6-volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66.19

Replacement Parts12541 Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.79

12542 Headlight trim ring with screw . . . . . . . . . . . . . . . . .$14.74

12545 Headlight lamp reflector . . . . . . . . . . . . . . . . . . . . . .$12.49

12543 12-volt replacement bulb . . . . . . . . . . . . . . . . . . . . . . .$6.49

12544 6-volt replacement bulb . . . . . . . . . . . . . . . . . . . . . . . .$6.49

Note: Will not fit Springer Softail® models from late 1988 thru 2003. Use CC #09754 instead.

Halogen 61/2"Springer-StyleHeadlightA modern rendition of the head-light on Springer front endsfrom 1936 thru 1954. High-power 12-volt, 55/100 watt halo-gen bulb, and heavy-duty mountwith adjustable mounting blockand hardware. Fits all FXWG andSoftail® models (includingSpringer Softail® models) from1980 to present, and any customapplication where a Bates 53/4"headlight would be used. $103.9909754 Headlight assembly

Replacement Parts12541 Headlight lens . . . .$14.79

12542 Headlight trim ring with screw . . .$14.74

12529 55/100 watt bulb . .$12.99

12527 55/60 watt bulb . . . .$8.64

Teardrop Headlight for Big TwinsChrome teardrop headlight features a smooth contoured retaining ring and a uniquedomed shape that enhances the front fork area. Available with standard or high outputhalogen sealed beams. Choose from a stock replacement for FXSTS models from 1993 topresent or custom version with Bates style tabs and mounting block for use on FXWG,FXDWG and Softail® models from 1980 to present.

53/4" for FX Springer Softail® Models from 1993 to Present330130 Chrome shell assembly (complete less bulb) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$64.49

330132 Headlight assembly with standard sealed beam . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.99

330133 Headlight assembly with halogen sealed beam . . . . . . . . . . . . . . . . . . . . . . . . . . . .$97.54

53/4" for FXDWG, FXST and FXWG Models from 1980 to Present and FX Springer Softail® Models from 1988 thru 1992330134 Headlight assembly with standard sealed beam . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.99

330135 Headlight assembly with halogen sealed beam . . . . . . . . . . . . . . . . . . . . . . . . . . . .$82.99

330131 Chrome shell assembly (complete less bulb) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$61.99

‘Spearpoint’ Chrome Headlight Housing KitFeatures a ‘Spearpoint’ trim strip that covers the seam on topof the housings, and includes new die cast aluminum,chrome-plated housings to replace the polished OriginalEquipment parts, as well as a new chrome riser cover. Fits 4-speed FL models from 1960 thru 1984. . . . . . . . . . . . . . . . .$299.9926747 Complete kit

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.09

Headlights


Chrome Billet Headlight Kit with Tri-Bar Lens CoverSlightly larger than comparable Tradewinds headlight, thischrome over billet aluminum beauty has unique features thatset it apart from the crowd. The headlight shell has a Tri-Barlens cover that allows the billet look to flow continuous fromfront to rear. The lens cover comes with a smooth bezel; anoptional lens cover with a knurled bezel is available for amore aggressive look. This headlamp also comes to a sharppoint at the rear of the housing, which gives it a morestreamlined appearance. Comes complete with 60/55 watt H-4 Halogen bulb. Accepts 3/4" mounting post. . . . . . .$328.49330300 53/4" headlight assembly with smooth bezel

Chrome 4" Halogen Light with Running LampTrick, small-diameter light can be used as a headlight or as an auxiliary light. Great for custom bike builds, especially fordual light conversions. Features a replaceable H4 60/55 watthalogen bulb and low wattage daylight running lamp.Includes chrome hardware for bottom mount applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.6927912 Sold each

‘Snake’ Custom Headlight UnitUniversal gel-coated GFK headlight unit for the ultimate performance look. Approvedand marked with an ‘E1’-mark. Includes 12V, H4 35/35W bulbs, inserts and all mountinghardware. Ready to sand and paint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$432.4985439 ‘Snake’ headlight unit assembly

Kodlin ‘Elypse’ Hi-Beam Billet HeadlightA show-chromed hi-beam billet headlight assembly from one of Europe’s premier customizers that breaks new ground in hi-tech styling.86501 Fits all Wide Glide® front ends from 1980 to present . . . . . . . . . . . . . . . . . . . . . .$779.09

640089 Replacement lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$60.50

Lig

htin

g

5.10

Adjure Headlights

5


Chrome Headlight Housings by AdjureFinish off your ride with these affordable chrome headlight hous-ings. We have 53/4" and 7" diameter housings in smooth andflamed styles to appeal to any taste, and a wide variety of customlamp assemblies for a clean, cool look (see page 5.12 for photosof lens styles). The lamp assemblies include a standard 55/60 wattH4 halogen bulb. 634006 Smooth 53/4" housing ONLY . . . . . . . . . . . . . . . . . . . . . .$279.99

634007 Flamed 53/4" housing ONLY . . . . . . . . . . . . . . . . . . . . . .$302.49

634008 Smooth 7" housing ONLY . . . . . . . . . . . . . . . . . . . . . . . .$250.00

634009 Flamed 7" housing ONLY . . . . . . . . . . . . . . . . . . . . . . . .$290.00

53/4" Lamp Assemblies ONLY61233 Ice-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.95

61235 Trillient style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$77.95

634060 Black Dot Tri-Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$77.95

634059 Skull-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$77.95

7" Lamp Assemblies ONLY15719 Ice-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.54

15721 Trillient style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.95

634062 Black Dot Tri-Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.95

634061 Skull-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.95

634006with

61233

634007with

61233

Mini Headlight Assemblies by AdjureThese 41/2"-diameter headlight assemblies are DOT-approvedand feature H4 halogen bulbs mounted in our popular ‘BlackDot Tri-Bar’ lamp assemblies for the ultimate in cool. 634002 Complete headlight assembly

with smooth housing . . . . . . . . . . . . . . . . . . . . . . . .$240.00

634003 Complete headlight assembly with flamed housing . . . . . . . . . . . . . . . . . . . . . . . .$270.00

634058 Replacement lamp assembly with H4 halogen bulb . . . . . . . . . . . . . . . . . . . . . . . .$69.95

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.11

Headlights


CCE Aluminum Headlight with TÜVBottom mount aluminum headlight by Custom Chrome® with H3 dual filament bulb. Available in blackor polished aluminum. Sold each.686370 Black686369 Polished

F. Kodlin ‘Mini Square’ Headlight with TÜVAfter the success of his popular ‘Elypse’ headlight, Fred Kodlin made this new TÜV approved ‘MiniSquare’ version. It comes with two bulbs and the front lens has a blue tint, while the housing is hand-polished and show chromed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$690.39686320 Sold each

30123

30124

Custom Scalloped HeadlightsCreative designs have built-in visors in the headlight rim and decorative scallops in thechrome-plated stamped steel bodies. Bottommount brackets are included for most FXWG, FX Softail® (except FXSTS), and Dyna Wide Glide®

models from 1980 to present as well as many custom applications. The 61/2" and 53/4" lightsinclude 55/60 watt H-4 halogen bulbs. Also available in a 41/2" mini-headlight for use indual headlight applications. Sold each.30123 53/4" headlight . . . . . . . . . . . . . . . . .$114.19

30124 61/2" ‘Springer’ headlight . . . . . . .$134.99

12721 41/2" mini-headlight with 12-volt hi-lo sealed beam for use in North American countries . . . . . . .$68.49

85857 41/2" mini-headlight with 12-volt 35/35W Bilux insert for use in European countries (TÜV approved) . . . . . . . . . . . . . . . .$115.99

Replacement Parts26400 Replacement 41/2" 30/30W

sealed beam for CC #12721 . . . . . .$13.99

85019 Replacement 41/2" 35/35W Bilux insert for CC #85857 (TÜV approved) . . . .$70.39

1272185857


Lig

htin

g

5.12

Headlamps & Bulbs

5

Headlight and Spotlamp Insertsfor European CountriesECE-approved inserts for all headlights and spot-lamps for use in European countries. Availablefor right hand traffic also. Units do not includethe bulb. Sold each.

For 41/2" Spotlamps and Headlights85019 12V, 35/35W Bilux unit . . . . . . . . . . .$70.39

85018 12V, H3 Fog Light unit . . . . . . . . . . .$53.09

85020 12V, H3 High Beam unit . . . . . . . . .$54.69

85022 O-ring set for aftermarket late-style spotlamps . . . . . . . . . . . . . .$5.49

85021 O-ring set for Original Equipment spotlamps . . . . . . . . . . . . . . . . . . . . . . .$10.49

For 53/4" Headlights84838 12V, H4 unit . . . . . . . . . . . . . . . . . . . . .$29.99

85016 12,V H4 unit, right hand traffic only, by Bosch® . . . . . . . . . . . . . . . . . . . . . . .$75.09

For 7" Headlights85795 12V, H4 unit . . . . . . . . . . . . . . . . . . . . .$33.49

85017 12V, H4 unit, right hand traffic only, by Bosch® . . . . . . . . . . . . . . . . . . . . . .$129.39

Bulb Retainer Spring85575 Fits 53/4" and 7" H4 inserts . . . . . . . .$6.29

Halogen Headlamps and BulbsDual-filament halogen 55/60 watt H-4 bulb with a precision-ground lens. 12-volt.12525 7" (repl. OEM 67755-81T) . . . . . . . . . . . . . . . . . . . . . .$33.25

12526 53/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$38.99

12527 55/60W H-4 halogen bulb only (repl. OEM 67697-81T) . . . . . . . . . . . . . . . . . . . . . . . . . .$8.64

12529 55/100W H-4 halogen bulb only . . . . . . . . . . . . . . .$12.99

Sealed BeamsFit all Custom Chrome® or Original Equipmentheadlight housings. Sold each.12508 53/4" 12-volt . . . . . . . . . . . . . . . . . . . . .$13.99

26425 53/4" 12-volt halogen . . . . . . . . . . . .$23.94

12507 53/4" 6-volt . . . . . . . . . . . . . . . . . . . . . .$18.49

15089 7" 6-volt . . . . . . . . . . . . . . . . . . . . . . . .$10.99

15090 7" 12-volt . . . . . . . . . . . . . . . . . . . . . . . .$8.19

26420 7" 12-volt halogen . . . . . . . . . . . . . . .$16.99

High Intensity H4 BulbsAn easy way to improve your nighttime visibility with a simple plug-inupgrade. Sold each.

German Rally BulbsStandard replacement bulbs available with up to 130 watt highbeam output for unbelievablenight time visibility.15135 55/60 watt . . . . . . . .$16.39

15136 80/100 watt . . . . . . .$16.39

15137 90/100 watt . . . . . . .$14.99

15138 100/130 watt . . . . . .$22.99

Clear Replacement Bulbs12527 55/60 watt . . . . . . . . .$8.64

12529 55/100 watt . . . . . . .$12.99

Xenon Boosted BulbsXenon boosted bulbs provide acleaner, whiter light.15139 55/60 watt . . . . . . . .$15.39

15125 55/100 watt . . . . . . .$17.54

Gold Multi-Layer Dichoric BulbGold multilayer dichoric coatingprovides a full spectrum colorbeam.15140 55/60 watt . . . . . . . .$25.99

‘Rainbow’ Coated BulbIncreases visibility in all weatherconditions due to its full-spectrumglass tint.15112 55/60 watt . . . . . . . .$19.99

H3 Halogen BulbsImprove the look and the light ofyour auxiliary lighting with these55 watt H3 bulbs. . . . . . . .$0.89 ea.15073 Gold tint 55 watt H3

halogen bulb (box of 10)15071 Blue tint 55 watt H3

halogen bulb (box of 10)

‘Jeweled’ Lamp Assemblies by AdjureGreat looks and safer lighting make these DOT approvedlamps a logical upgrade. The 55/60 watt H4 bulb with the ‘diamond cut’ or ‘wave cut’ reflectors deliver powerful illumi-nation. The ‘Ice-style’ has a smooth, clear lens, and is alsoavailable in a ‘Skull’ version. The Trillient-style has a tri-barwith a blue dot, and the Black Dot Tri-Bar model features a‘wave cut’ reflector (except 41/2" model).

7" Headlamp AssembliesFit all FL Softail®, FLT, FLHT, FLHS and Road King® housingsand CC #’s 26477, 26473 headlights. They’re also perfect forthe Adjure headlight housings elsewhere in this section.15719 Ice-style with ‘diamond cut’ reflector . . . . . . . . . .$69.54

15721 Trillient style with ‘diamond cut’ reflector . . . . . .$99.95

634062 Black Dot Tri-Bar with ‘wave cut’ reflector . . . . .$99.95

634061 Skull-style with ‘diamond cut’ reflector . . . . . . . .$99.95

53/4" Headlamp AssembliesFit all FX, FXR, Sportster® and Dyna Glide models, as well asany of Custom Chrome’s 53/4" headlight assemblies. They’realso perfect for the Adjure headlight housings elsewhere inthis section.61233 Ice-style with ‘diamond cut’ reflector . . . . . . . . . .$59.95

61235 Trillient style with ‘diamond cut’ reflector . . . . . .$77.95

634060 Black dot Tri-bar with ‘wave cut’ reflector . . . . . .$77.95

634059 Skull-style with ‘diamond cut’ reflector . . . . . . . .$77.95

41/2" Headlamp AssembliesFits most custom 41/2" mini headlight housings.634058 Black dot Tri-bar with ‘diamond cut’ reflector . .$69.95

Ice

Skull

Trillient

Black Dot Tri-Bar

15073


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.13

Headlamps & Bulbs

Replacement HalogenSpotlamp Sealed Beams12-volt halogen sealed beams fitmost 41/2"-diameter spotlamp andmini-light housings, and havescrew terminal wire attachments.Sold each. . . . . . . . . . . . . . . . . .$16.9915085 Single beam, 37.5 watt,

70,000 candlepower (clear non-fluted lens)

15086 Single beam, 50 watt,110,000 candlepower(clear non-fluted lens)

*Note: The high power requirements ofthese bulbs may cause excessive drain oncharging systems. May not be legal in your state, check local regulations beforeinstallation.

Screw Terminal Type

‘Diamond Cut’ Halogen Headlight AssemblyThese 7"-diameter sealed beams are designed with high-performancecyclists in mind. Engineered for both low and high-speed riding, the 55/60watt halogen bulb projects a strong white beam of light directed by aunique gemstone-inspired reflector which utilizes a centered reverse reflector to eliminate the dark center usually associated with halogenlamps. DOT approved. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$78.94330231 Fits 7" headlight housings

Custom Halogen Light UnitThese light units have a replaceable bulb, and have been designed to fitinto any existing 41/2" light assembly with no modifications necessary. Three-bladed design gives a nostalgic streamliner look to your current headlightbasket. 12 volt 60/55 watt halogen bulb included. Will now accept a P43Tbase halogen bulb. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$83.99330246 Gloss black center dot. H3-55 watt. Fits all 41/2" OEM and after-

market shells, including Headwinds and Tradewinds styles

‘Rainbow Strobe’ Lens Cage for H4 BulbsThree-panel filter cage allows motorcycle to bebetter seen when driving. For use with head-lights with H4 halogen bulbs. . . . . . . . . . . .$29.9915077 Sold each

Hi-Low Beam RelaySpecial 12-volt relay allows control of the hi-lowbeam from one wire using a momentary (horntype) button. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32.9917729 Sold each

Lig

htin

g

5.14

Headlight Housings

5


Headlamp Housing Kit for FL ModelsThis kit features chrome-plated componentsthat are accurate reproductions of the pol-ished Original Equipment parts fitted tomost 4-speed FL models from 1960 thru1984. It is also a natural for customizing anybike fitted with an early FL-style front end.Top-quality components make the kit a snapto install, with all needed hardware and a 7-inch halogen sealed beam that’s included.26531 Fits 4-speed FL models with Original

Equipment or Custom Chrome tripletrees from 1960 thru 1984 (handle-bar clamp cover is for non-dampermodels) . . . . . . . . . . . . . . . . . . . . .$429.99

Replacement Parts26536 Set of left and right chrome-plated

housings (repl. OEMs 67847-60,67848-60) . . . . . . . . . . . . . . . . . . .$289.99

26535 Chrome outer trim ring with rubber seal and four retaining clips (repl. OEMs 67712-60A, 67716-60A and 67779-60) . . . . .$22.79

26526 Retaining ring for sealed beam (repl. OEM 67765-60) . . . . . . . . .$25.84

26893 Inner headlight mount with twoadjusting screws for FL models from 1960 thru 1969 (repl. OEM 67702-65) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99

26894 Outer headlight bucket for FL models from 1960 thru 1984 (repl. OEM 67766-60) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.49

25234 Set of left and right chrome slider covers (repl. OEM 45964-49T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.59

26537 Chrome handlebar clamp cover for use with steering damper (repl. OEM 58589-60) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.49

26538 Chrome handlebar clamp cover for use without steering damper (repl. OEM 58590-60) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.49

160097 Wiring plug fits all 3 prong headlights, spotlights and custom driving lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49

160095 Adjusting screw (repl. OEM 67767-60) . . . . . . . . . . . . . . . . . . . . . . . . . .$3.99

330071 Top Spring, fits all FL, FLT models 1960 up with 7" headlight (repl. OEM 67778-60) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99

330072 Bottom Spring, fits all FL, FLT models 1960 up with 7" headlight (repl. OEM 67780-60) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99

‘Wave’ HeadlightsBottom mount headlight with twoH3 12V/55W bulbs. The housingsare hand polished and chromed.They are E1 approved for highbeam and fog lamp! Measure152mm x 70.4mm x 60.6mm.Sold each . . . . . . . . . . . . .Call for price686772 Blue lens headlight686774 Clear lens

headlight

‘Wave’ HeadlightsHeadlight for bottom or topmount (long holes) with two H312V/55W bulbs. Fit in fairings ornaked bikes. E1 approved for highbeam and fog lamp! Measure152mm x 70.4mm x 60.6mm.Sold each . . . . . . . . . . . . .Call for price686773 Blue lens headlight686775 Clear lens headlight

‘Square’ HeadlightsHeadlight for bottom or sidemount with two H3 12V/55Wbulbs. Fit in fairings or on nakedbikes. E1 approved for high beamand fog lamp! Measure 150mm x51mm x 71mm. Sold each . . . . . . . . . . . . .Call for price686776 Blue lens headlight686778 Clear lens headlight

‘Square’ HeadlightsHeadlight for bottom or uppermount with two H3 12V/55Wbulbs. Fit in fairings or on nakedbikes. E1 approved for high beamand fog lamp! Measure 150mm x51mm x 71mm. Sold each . . . . . . . . . . . . .Call for price686777 Blue lens headlight686779 Clear lens headlight

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.15

Spotlamps


Chrome Early Style Spotlamp AssembliesChrome reproductions of the early 1938-1961style spotlamp assemblies. Available with 6 or 12-volt bulb and original style clamp bracket for 1938-1961 models and custom applications.These units duplicate the original design withseparate bulb, lens and reflector componentsand are ideal for restorations. Replacementparts are also available and can be interchangedwith original equipment spotlights. Sold each.12471 Complete assembly with 12-volt bulb

(repl. OEM 68649-64) . . . . . . . . . . . .$40.99

Replacement Parts12476 6V bulb (repl. OEM 68715-49) . . . . .$6.49

12477 12V bulb (repl. OEM 68715-64) . . . .$6.49

19239 Turn signal mounting kit – includes one of CC #’s 19237 and 19238 (repl. OEM 68518-68) . . . . . . . . . . . .$11.59

330102 Clear glass lens ONLY(repl. OEM 68660-38) . . . . . . . . . . . . .$7.54

330105 Lamp reflector ONLY(repl. OEM 68676-38) . . . . . . . . . . . .$12.49

41/2" Mini LightOur chrome 41/2" mini light assembly features a12 volt dual element sealed beam (high/low)with 10,000 candlepower, adjustable mountingblock, extra long wiring harness and a built-inhigh beam indicator. Sold each.330090 Mini light assembly . . . . . . . . . . . . . .$39.99

330091 Shell ONLY (bulb not included) . . .$22.99

Chrome 41/2" Mini Driving Light Our chrome 41/2" mini light features a TÜVapproved 12 volt 55 watt bulb, adjustablemounting block and built-in blue indicator light.Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.49330092 Mini light assembly

Custom Ribbed 41/2" Mini Driving LightThese 41/2" mini driving lights aredesigned to match our custom ribbedheadlights (see page 5.11).330190 Mini light with dual filament

halogen bulb . . . . . . . . . . . .$65.99

330196 Chrome shell assembly (complete less bulb) . . . . . .$55.49

Custom 31/2" Mini Driving LightThese 31/2" mini driving lights are chromed steeland come with 12volt, 60/55W halogen bulb.Available with visor or without visor.330198 Mini light with visor . . . . . . . . . . . . .$59.99

330199 Replacement lens with reflector .$24.99

Doss Custom Teardrop Spotlightswith Marker LightsDesigned to match perfectly with our teardropheadlights these new spotlights also work inOEM applications as well. They use stock stylespotlamps and feature a slick looking L.E.D.marker lamp built right in below the spotlamp.The marker light can be wired to flash alongwith your turn signals. They mount to to theOEM spotlight bars on all models and look evenbetter when used with the custom Doss V-stylespotlight brackets. OEM turn signals will have tobe relocated. Designed by Rick Doss. Sold inpairs.62406 Fits all Big Twin models with OEM

type spotlights . . . . . . . . . . . . . . .$199.95

62412 Replacement amber LED turn signallamp assembly (sold each) . . . . . .$14.99

Lig

htin

g

5.16

Spotlamps & Brackets

5


Spotlamps with Custom Housing and Visor Trim RingEasy-to-install custom spotlamps have chrome-plated,stamped steel housings with decorative scallops and one-piece trim ring with a built-in visor. They use the same sealedbeams as standard spotlamps. Matching 53/4" and 61/2" head-lights are available on page 5.11 of this catalog section for acoordinated custom look. Sold each. . . . . . . . . . . . . . . . . . .$59.9912744 Fits all spotlamp-equipped models from 1968

to present

Doss V-Style Spotlamp BracketsTired of the ‘sagging hammock’ look of factory spotlamp brackets? Here’s a V-stylishalternative designed by master customizer, Rick Doss, that bolts-on quickly and easily toreplace its Original Equipment counterpart. A matching rear turn signal mounting bar is also available and can be found on page 5.65 of this catalog section! . . . . . . . . . . .$78.4946632 Fits FL Softail® models from 1986 to present (repl. OEM 58082-87)46633 Fits all Road King® models from 1994 to present (repl. OEM 68712-94)46654 Fits with Doss teardrop headlight housing kit (CC #46534)

Custom Spotlamp Bracket by Motherwell ProductsSolid steel construction, hand polished and chromed to a show quality finish.Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$118.4937476 Fits all FL Softail® models from 1986

to present

Ness-Tech® Radius Spotlight BarsCurvaceous flowing designsmake this chrome plated billetaluminum spotlight mountingbar an eye-catching addition.Available with or withoutsuper-bright LED turn signals.They accept Ness-Tech®,Headwinds, OriginalEquipment or our popularCustom Chrome® spotlights.Note: Designed as supplemental lighting ONLY, and should not be used toreplace Original Equipment running lights or turn signals.

Fits FLHT and Road King® and FLHTC Models from 1994 to Present04910 Bar with LED turn signals . . . . . . . . . . . . . . . . . . . . .$369.95

Fits Heritage Softail® Models from 1986 to Present04911 Bar with LED turn signals . . . . . . . . . . . . . . . . . . . . .$369.95

Spotlamp MountingBracketsMount spotlamps or other auxil-iary lighting to the front forks.For FL models 1949 thru 1984(repl. OEMs 68603-62, 68604-62).12517 Sold in pairs . .$36.49

Doss Custom Teardrop Spotlights with V-Style BracketsThese exclusive Doss teardrop spotlights offer a great new look to any stock or custommotorcycle. They feature a teardrop housing with slick built-in L.E.D. marker light thatdoubles as an extra turn signal. They use any stock spotlamp and come complete withthe Doss V-style mounting brackets for the ultimate in custom styling.620999 Fits FLST Softail® models from 1986 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . .$259.95

620998 Fits Road king® models from 1994 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . .$259.95

620997 Fits with Doss teardrop headlight kits 46534, 46336 and 46334 . . . . . . . . . .$259.95


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.17


Universal Toggle SwitchHandles 6 or 12-volt applications up to 35 amps. It was used for the spotlamps on 4-speed FL models from 1962 thru 1984 andHeritage Softail® Classic models from 1987 to present. . . . . . . . . . . . . . . . . . . . . . . .$6.4926097 Replaces OEMs 67844-70, 67858-89

Chrome Spotlamp Mounting BarsAccurate reproductions of the stock bars.12555 Fits all 4-speed FL models from 1968

thru 1984 (repl. OEM 68780-68) . .$65.59

12469 Fits all FL Softail® models from 1986 topresent (repl. OEM 58082-87) . . . .$63.84

32356 Chrome 17/32" hole plugs for spotlamp bar (pack of 10) . . . .$10.99

12555

12469

Halogen Spotlamp Sealed Beams41/2" clear non-fluted 12-volt halogen sealedbeams throw lots more light than the stock22,000 candlepower and 30 watts.15085 70,000 candlepower/37.5 watts.

Beam spread is 7° horizontal and 4° vertical . . . . . . . . . . . . . . . . . . .$16.99

15086 110,000 candlepower/50 watts. Beam spread is 7° horizontal and 5° vertical . . . . . . . . . . . . . . . . . . .$16.99

Note: May cause excessive charging system drain, and maynot be legal in all states.

Spotlamp Kits by National CycleAdd extra lighting capacity to your bike byinstalling these kits directly to either the forktubes, or the lower triple tree. Includes spot-lamps, turn signals and all required hardwareand clamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$269.9415330 Fits all FX Softail®, Dyna Wide Glide®

and 4-speed FXWG models with 41mmforks from 1980 to present

15467 Fits all FXR, Sportster® and Dyna Glidemodels (except Dyna Wide Glide®

models) from 1988 to present

15330

15467

Chrome Lamp InsertClassic "Tri-Bar" lamp insert adds a custom lookto spotlights. Chrome steel construction. Bolt oninstallation. Sold each. . . . . . . . . . . . . . . . . . . .$15.49330240 Fits 41/2" spotlamps

Trillient Bullet Black Dot

‘Jeweled’ Spotlamp Lenses by AdjureThese DOT approved lamps feature halogen H335 watt bulbs, and reflectors with ‘diamond cut’or ‘wave cut’ reflectors to deliver powerful illu-mination. The ‘Ice-style’ is not shown but has asmooth, clear lens, but no bulb reflector. All ofthe spotlamps will fit most Original Equipmentand aftermarket housings. Sold in pairs.634054 Ice (diamond-cut reflector) . . . . . . .$89.90

634055 Trillient (diamond-cut reflector) .$129.90

634056 Black Dot Tri-Bar (wave-cut) . . . . .$129.90

634057 Bullet (diamond-cut reflector) . . . .$99.90

Chrome Spotlamp Housings by AdjureFinish off your ride with these affordablechrome 41/2" spotlamp housings that are avail-able in smooth and flamed styles to appeal toany taste. A wide variety of custom spotlamplenses are also available for a clean, cool look(see elsewhere on this page for photos of lensstyles). Sold each.634004 Smooth housing ONLY . . . . . . . . . .$149.90

634005 Flamed housing ONLY . . . . . . . . . .$173.40

Spotlamp Lenses (sold in pairs)634054 Ice (diamond-cut reflector) . . . . . . .$89.90

634055 Trillient (diamond-cut reflector) .$129.90

634056 Black Dot Tri-Bar (wave-cut) . . . . .$129.90

634057 Bullet (diamond-cut reflector) . . . .$99.90

Halogen SpotlampsThese are Original Equipment parts. The 35 wattlamps feature clear lenses and distinctive reflec-tive inner domes for a bright balanced light tocomplement your halogen headlight. Fit allOriginal Equipment and aftermarket spotlamphousings from 1968 to present. . . . . . . . . .$132.2975564 Replaces OEM 68208-98 (sold in pairs)

Lig

htin

g

5.18

5



Chrome Spotlamp and Mounting Bar KitsWe’ve taken our complete spotlamp assemblies and combined them withour chrome mounting bars to produce these complete kits. They’re avail-able with or without dual filament turn signals and your choice of four dif-ferent styles of sealed beams. Each kit includes all required wiring andconnectors and a toggle switch.

Kits with Turn Signals for 4-Speed FL Models 1968 thru 198412556 With amber fluted sealed beams . . . . . . . . . . . . . . . . . . . . . . . . .$169.99

12557 With clear fluted sealed beams . . . . . . . . . . . . . . . . . . . . . . . . . . .$204.49

12592 With clear non-fluted sealed beams . . . . . . . . . . . . . . . . . . . . . .$199.99

Kits without Turn Signals for 4-Speed FL Models 1968 thru 198412559 With clear fluted sealed beams . . . . . . . . . . . . . . . . . . . . . . . . . . .$138.99


Kits with Turn Signals for Heritage Softail® and Fat Boy® Modelsfrom 1986 to Present12486 With amber fluted sealed beams . . . . . . . . . . . . . . . . . . . . . . . . .$192.49


12594 With amber non-fluted sealed beams . . . . . . . . . . . . . . . . . . . . .$190.99


Kits without Turn Signals for Heritage Softail® and Fat Boy®

Models from 1986 to Present12488 With amber fluted sealed beams . . . . . . . . . . . . . . . . . . . . . . . . .$144.99



Replacement Parts12481 Spotlamp rim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.99

26097 Toggle switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49

12557

12489

12486

Late Model Spotlamps and Sealed BeamsChoose from a variety of chrome-plated reproductions of the late-modelspotlamps with your choice of four different 12-volt sealed beams.Replacement sealed beams for Original Equipment and aftermarket spot-lamps are also available. Mounting clamps available separately. Sold each.

Spotlamp Assemblies12483 With amber fluted sealed beam . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.99

12480 With clear fluted sealed beam (repl. OEM 68667-78) . . . . . . . .$34.99

12485 With amber non-fluted sealed beam . . . . . . . . . . . . . . . . . . . . . . .$38.99

12591 With clear non-fluted sealed beam (not shown) . . . . . . . . . . . .$42.49

Replacement Sealed Beams12482 Fluted amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.99

12524 Fluted clear (repl. OEM 68674-69) . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99

12484 Non-fluted amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.99

12590 Non-fluted clear (not shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.64

Replacement Parts12481 Spotlamp rim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.99

19238 Spotlamp housing mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . .$5.39

12480

12485 12483

1248412524

12482

Universal Headlight Bracket with TÜV ApprovalPolished billet aluminum dual headlight mounting bracket with decorativegrooves for most models and aftermarket triple trees, as well as for manyJapanese cruisers. Tapped with metric threads.85039 Universal dual headlight bracket . . . . . . . . . . . . . . . . . . . . . . . . . .$122.19

Chrome 4" Halogen Light with Running LampTrick, small-diameter light can be used as a headlight or as an auxiliarylight. Great for custom bike builds, especially for dual light conversions.Features a replaceable H4 60/55 watt halogen bulb and low wattage daylight running lamp. Includes chrome hardware for bottom mount applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.6927912 Sold each


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.19

Headlight Brackets

Chrome Billet Headlight BracketsA wide variety of brackets by Custom Cycle Engineering make easy work of mounting headlights toCustom Cycle Engineering triple trees.46920 For 53/4" headlight, standard position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.00

46921 For 53/4" headlight, recessed position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.00

46922 For mounting headlight on 1993 thru 2003 Springer models . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.50

46923 For mounting of 7" headlights (also requires CC #26491 bracket, not included) . . . . . . . . . .$52.50

Headlight Lowering Kits for Springer Softail® ModelsChrome billet mounts from Badlands move theheadlight to the bottom of the Springer shock.Includes all hardware and acorn nuts to matchthe other fastener on the front end. . . . .$119.9536930 For Springer Softail® models

from 1993 to present36929 For Springer Softail® models

from 1988 thru 1992

Chrome Headlight BracketsUniversal fit for most 35mm fork tubes. . .$14.3912516 Sold in pairs

7" Headlight Mounting BracketsChrome brackets for mounting 7” headlightassemblies to Wide Glide® front ends.26476 Fits FX Softail®, Dyna Wide Glide®

and 4-speed FXWG models from 1980 to present . . . . . . . . . . . . . . . . . .$16.99

26491 Fits 4-speed FL models from 1949 thru 1984 (repl. OEM 67810-48) . . . . . . . . . . . .$15.49

Note: CC #26476 requires removal of lower tree cover, anddrilling and tapping lower tree on models from late 1985 thru 2003.

3/4" Headlight Mounting BlockPolished aluminum 3/4" headlight mounting block with 3/8"-16 threads for bottom mount installations.634010 Sold each . . . . .$7.95

26491

26476

Chrome Bottom Mount Headlight BracketsCustom brackets for a sharp clean installation.12519 For Sportster®, FX and FXR models

1971 thru 1987 (except FXLR and FXRS Sport Edition models) . . . . . .$14.99

12536 Custom bottom-mount bracket fits all 4-speed FL models 1949 thru 1984with 53/4" headlight assemblies . .$13.99

12536

12519

46921

46923 46922

Universal Headlight Brackets with TÜV ApprovalAluminum mounting brackets for both, singleand dual headlight applications. CNC-machinedfrom 5mm thick aluminum and highly-polished.They fit most Original Equipment and aftermar-ket triple trees. Sold each.85859 Dual headlight bracket . . . . . . . . . .$67.79

85860 Single headlight bracket . . . . . . . . .$62.59

46920

Chrome Headlight Lowering BracketLowers the headlight 21/2" on late 1988 thru 1992 Springer Softail® models. . . . . . . .$53.9518026 Sold each

Lig

htin

g

5.20

5


Headlight & Spotlight Visors

Chrome One-Piece Trim Rings with Integral VisorsImprove the look of your bike with these easy to install one-piece trim ringswith integral visors for headlights and spotlamps.

Complete SetsIncludes a trim ring/visor for the headlight and a pair for the spotlamps.15458 Fits 4-speed FL models with fork tins and late-style spotlamps

from 1949 thru 1959 (includes CC #’s 15453) . . . . . . . . . . . . . . . . . . . . .$63.99

Headlight Trim Ring and Visor (sold each)15457 Fits most Original Equipment and aftermarket aluminum

headlight housings or single-headlight fiberglass fairings . . . . . . . .$40.09

15453 Fits the 7" headlight on 4-speed FL models from 1949 thru 1959 and Custom Chrome® reproduction headlights . . . . . . . . .$34.99

‘Frenched’ Headlamp Trim RingsCustomize your stock headlight with these easy to install trim rings and covers. The extended depth adds a distinctive look. Replaces the Original Equipmenttrim rings or installs over them depending on model.15548 Fits FXST, FXSTB, FXSTC, FXLR and Dyna Glide models from 1994 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.99

15549 Fits FXSTS models from 1993 to present, FXSTSB models from 1995 thru 1997, XL1200C and 883C Sportster® models from 1996 thru 2003, FLSTS models from 1997 to present, FXR models from 1999 to present and Softail® Deuce™ models from 2000 to present . . . . . . . . . . . . .$23.99

15550 Fits Sportster® models (except XL1200C and 883C) from 1963 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.99

15551 Fits FLSTC, FLSTF and FLSTN models from 1994 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99

15552 Fits FLHT, FLHS and Road King® models from 1983 to present and FLST models with aluminum accessory headlight nacelle from 1986 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99

‘Frenched’ Passing Lamp Trim RingsMade with the same “frenched” look as the headlamp trim ring covers. Replaces the Original Equipment trim rings and includes chrome hardware. Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.9915547 Fits all models from 1962 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.99

BEFORE AFTER


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.21

Headlight & Spotlight Visors

Chrome 7" Headlight Trim Rings with Built-In VisorsThese visors look like they were designed in and not added on. Styled tofollow the contours of the headlight housing. These pieces are sure to give your bike a fresh, unique look. Offered in two versions, Smooth Top or with a Raised Pointed Tip to blend in as a matching highlight on OEMtype 1960 thru 1984 FLH housings. Also looks great on FLHT and FLHS models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.1930106 Raised Pointed Tip version for 1960 thru 1984 FLH, CC #26536

housings and 1980 to present FLHT and FLHS models30107 Smooth Top version for 1960 thru 1984 FLH, CC #26536 housings and

1980 to present FLHT ,FLHS and Road King® models from 1994 to present (not shown)

30106

‘Eyebrow’ CoversChrome-plated, stamped steel covers for Sportster®, FX, FXR andDyna Glide headlight brackets(eyebrows). Available with or without cutaway for warninglamps. . . . . . . . . . . . . . . . . . . . . .$15.2419641 Without cutaway19642 With cutaway

Headlight ‘Eyebrow’AdaptersRiser bolt-mounted adapters makeit easy to use Sportster® or FXR-style headlight visors (eyebrow)with a Custom Cycle Engineeringbillet triple tree. . . . . . . . . . . .$38.0046918 For rubber-mount risers46919 For rigid-mount risers

15222

15221

330032

330040

330041

330042

Embossed Eagle VisorsThese chrome steel visors feature a highly detailed embossedeagle emblem. Available in choice of all chrome or with goldaccented eagle.

7" Headlight VisorsFits aluminum or steel FL headlights. Sold each.15222 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.09

330040 Gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.97

53/4" Headlight VisorsFits FX, FXR, XL, and Softail® models with 53/4" headlight. Sold each.15221 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49

330041 Gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.99

41/2" Spotlight VisorsFits FL, FLT, and Softail® models with 41/2" spotlights. Sold in pairs.330032 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.49

330042 Gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.49

Chrome Light VisorsSmartly designed and easy to install.15165 41/2" spotlamp visor. Sold in pairs . . . . . . .$7.99

Chrome Headlight VisorsDie-cast ‘eyebrows’ include appropriate holes for indicator lights on modelsthru 1991.12618 With four holes for Sportster®, FXR and Dyna Glide models

from 1986 thru 1991 (repl. OEMs 67805-86A, 67863-90) . . . . . .$29.04

12620 With two large indicator light holes (repl. OEM 67809-75) . . .$42.54

12621 Without light holes (repl. OEMs 67809-70, 67805-86) . . . . . . . .$27.10

12618

12620

12621

Headlight VisorsChrome-plated headlight visors are easily installed on our 7" headlight assemblies (CC #’s 26473, 26477) as well as 53/4" bottom and side mount headlights. . . . . . . . . . . . . . . . . . . . .$7.8415163 7" headlight visor (repl. OEM 67752-77T)15190 53/4" headlight visor (repl. OEM 67750-88T)

Lig

htin

g

5.22

Taillight & License Plate Kits

5


‘Fluid Style’ Billet Aluminum LED Taillights and License Frames by Paul Yaffe Originals®

Ultra bright dual intensity LED taillight and brake light combination withplate illumination and stepped billet aluminum license frames have hiddenhardware for a clean look. Available in horizontal and vertical mount.

Vertical Mount Light and Frame47628 Vertical side mount, use CC #’s 47611 thru 47617 chrome

billet aluminum mounts for specific applications . . . . . . . . . . . .$467.99

47611 Axle mount adapter for Softail® models . . . . . . . . . . . . . . . . . . . .$114.99

47612 Primary case mount adapter for Softail® models . . . . . . . . . . . . . .$64.49

47613 1" frame tube mount adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$126.49

47614 11/8" frame tube mount adapter . . . . . . . . . . . . . . . . . . . . . . . . . . .$126.49

47615 Peg mount adapter for Softail® models . . . . . . . . . . . . . . . . . . . . .$121.99

47616 Shock mount adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$78.99

47617 Mount adapter for Pro-Street frames . . . . . . . . . . . . . . . . . . . . . . . .$81.99

Horizontal Mount Light and Frame47629 Horizontal side mount, use CC #47630 chrome billet

aluminum mounts for specific applications . . . . . . . . . . . . . . . . . .$447.99

47630 Axle mount for Softail® models from 1984 thru 1999 . . . . . . . .$142.99

47632 Shock mount for FXR, FXD and Sportster® models . . . . . . . . . . .$114.99

Note: Installation of these accessories may be in violation of FMVSS Standard #108

Vertical Taillight/License Mountsby Paul Yaffe OriginalsHot-looking license plate and Cateye taillight mount. Add the chrome-billet LED Cateye taillight for the ultimate look.47600 LED Cateye taillight ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$229.99

47610 License plate mount with ‘Cateye’ LED taillight . . . . . . . . . . . . .$393.99

47618 License plate mount with illumination light . . . . . . . . . . . . . . . .$239.99

47619 License plate mount with square LED taillight . . . . . . . . . . . . . .$379.99

47601 License plate mount only with ‘Cateye’ mount . . . . . . . . . . . . . .$179.99

47611 Axle mount adapter for Softail® models . . . . . . . . . . . . . . . . . . . .$114.99

47612 Primary case mount adapter for Softail® models . . . . . . . . . . . . .$64.49

47613 1" frame tube mount adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$126.49

47614 11/8" frame tube mount adapter . . . . . . . . . . . . . . . . . . . . . . . . . . .$126.49

47615 Footpeg mount adapter for Softail® models . . . . . . . . . . . . . . . .$121.99

47616 Shock mount adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$78.99

47617 Mount adapter for Pro-Street frames . . . . . . . . . . . . . . . . . . . . . . . .$81.99

47610 with 47613 mount

47618

47619

47600Taillight

Sidemount License Plate Frames for Softail® ModelsMachined from billet aluminum. Features show quality chrome finish, hi-intensity LED taillight and channeled wiring. Both versions mount inplace of the outer axle spacer for a clean installation. Fit all 5-speed Softail®

models from 1986 thru 1999. Made in USA. . . . . . . . . . . . . . . . . . . . . . .$379.3947236 Horizontal mount47237 Vertical mountNote: Installation of these accessories may be in violation of FMVSS Standard #108

47237

47236

Heartland USA™ Billet License Plate HolderChrome billet license plate holder comes with a side-mounted LED for amore modern look and better visibility while riding at night. It attaches tothe footpeg mounting point on the left-side of the bike. Use the 3/8" boltadaptor kit for when installing this kit on Softail® models from 2000 topresent.23571 Complete kit for Softail® models from 1986 thru 1999 . . . . . . .$399.99

23572 Adaptor kit for models from 2000 to present . . . . . . . . . . . . . . . . .$19.99Note: Installation of this accessory may be in violation of FMVSS Standard #108.

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.23

Taillights & License Plate Kits


‘Radius’ Side Mount Brake Caliper and Taillight/License Plate Mounts by Paul Yaffe OriginalsContoured to conform to the wheel and brake rotor on theright-side of your bike for a totally custom look. Chrome bil-let aluminum caliper mount and license plate frame have hi-Intensity LED taillights. Smooth design features hiddenmounting hardware and special channels milled into thebracket to hide wiring. For use with 18" wheelsONLY and RevTech® or PM 4-piston calipers and7"-wide x 4"-tall license plates. . . . . . . . . . .$789.9947642 For Softail® models from 1986 thru 1999

(right-side mount)47644 For FXR models 1984 thru 1994 (right-

side mount)47643 For custom rigid frames with 111/2" rear

rotors (right-side mount)

Universal Taillight/License Plate MountSimilar to the kits above but without the integral caliper mount. Mounts to the left-side on most models and clears the 70-tooth belt pulley.47645 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$789.99

47647 Billet clamp for 1"-diameter frame tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$132.99

47648 Billet clamp for 11/8"-diameter frame tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$132.99


4764247642

‘The Answer’ LED OvalTaillight by Paul Yaffe OriginalsFeatures raw aluminum billet bezelthat is designed for a flawless flushmount installation. Can be lit withthe outer ring, center ring or bothat the same time! This permits manyturn signal and brake light combina-tions. Works with hard saddlebags,fenders and other custom applica-tions. Made in USA. Sold each.47691 Large Answer LED lamp

(measures approximately 8" x 5") . . . . . . . . . . . .$299.99

47697 Small Answer LED lamp(measures approximately4.75" x 3.5") . . . . . . . .$286.99

Note: Bolts must be trimmed for your application.

47644

‘Soon-2B-Copied’ Sidemount License Plate Frame by Paul Yaffe OriginalsSketched on a cocktail napkin during a plane ride home from the Indyshow, Paul Yaffe came up with the most radical sidemount design he hadever conceived. It’s filled with dozens of super bright LED’s and even hasthe exclusive strobing brake light for safety. Works with all PYO verticalsidemount brackets. Machined from 6061-T6 billet aluminum and thenflawlessly chrome-plated. Mounting brackets sold separately. . . . . . . .$407.99600041 Sidemount license plate frame

Universal Flat SurfaceMount by Paul YaffeOriginalsOriginally designed for the PYO‘Phantom’ frame because therewasn’t anywhere to install oneof our traditional sidemountbrackets on such an exoticframe. Requires two 1/4" x 20holes to be drilled and tappedand will work with any of ourvertical sidemounts. Machinedfrom 6061-T6 billet aluminumand chrome-plated. Mountinghardware included. . . . . . .$96.99600042 Flat surface mount

bracket Laydown Tubing Mounts by Paul Yaffe OriginalsAn addition to the sidemount bracket collection, this laydown configura-tion fits 1" or 11/8"-diameter tubing. Created for use on the swingarm sec-tion of hardtail or Softail® models, this “drill-and-mount” bracket reallyrakes the plate holders to almost parallel to the tube it’s mounted on.Works great with ‘Soncy’ sidemount or with any Paul Yaffe vertical plateholders. Requires drilling and tapping of two 1/4" x 20 holes. Machinedfrom 6061-T6 billet aluminum and then chrome-plated for quality.600043 For 1" tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$96.99

600044 For 11/8" tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$96.99

Lig

htin

g

5.24


5

86-313

Ness-Tech® ‘Laydown’ License Plate MountRecessed to protect your license plate. CNC-machined from 1/4"-thick billetaluminum. Include the mounting block and all necessary hardware. Fit most models from 1973 to present (except Touring models, V-Rod® models,and Big Twin models equipped with Fat Bob rear fenders).05627 Chrome backing plate without light mount . . . . . . . . . . . . . . . . .$59.95

05579 Chrome backing plate for Cateye taillight . . . . . . . . . . . . . . . . . . .$74.95

05579

05627

611220

Custom License Plate Frames with Taillights by Choppers Inc.Unique aluminum license frames with an artistic flair. Manufactured out of6061-T6 billet aluminum with highly-polished finishes. They feature agroove behind the tag to hide the wires and are available in a Dice or IronCross design. The milled frame is recessed to accommodate the license platewhile providing a flush seam on the edges. Designed to mount on thefender or a a side-mount unit. Both styles have license plate illuminationand feature red plastic lens inserts and standard 1157 bulbs.240209 License plate frame with dice . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$579.99

611220 License plate frame with Iron Cross . . . . . . . . . . . . . . . . . . . . . . . .$429.99

240209

Universal Taillight/License Plate Assembly• Made to mount on the left or right

side of your custom• Features 11/8" frame tube adaptor• Bracket mount fits custom

applications only• Includes taillight695394 Sold each . . . . . . . . . . . . . .$205.49


Doss Taillight Adaptor Bracket for Deuce™ ModelsChrome adaptor bracket from the mind of master customizer Rick Doss, will permit you to adapt many of CC’s three hole mounting license brackets to Deuce™ models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$120.4962567 Fits the rear fender of all Deuce™ models from 2000 to presentNote: Recommended for use with the following license brackets; CC #’s 05579, 65255, 86313,65111 and 47853.

Folding Side Mount License Plate FrameChrome billet license mount folds out of the way using a unique spring-loaded mechanism. Mounts to left passenger footpeg. . . . . . .$224.9928375 Fits Softail® models 1984 thru 2003 or custom mount

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.25



Doss Sidemount Taillight and License Plate BracketComplete with a Rick Doss designed taillight and hardware, or with provi-sions for a universal taillight of your choice, this unique design permits amore stable frame-mounting on either the left or right-side where theyclamp to the swingarm pivot axis tube. They’re available in standard bulbor LED versions to fit most Softail® models from 1984 to present. The LEDunit features 60 individual LED’s and is substantially brighter than the stan-dard unit.

For Softail® Models from 1984 thru 199946685 Complete kit with standard taillight . . . . . . . . . . . . . . . . . . . . . . . .$223.39

46852 Complete kit with LED taillight . . . . . . . . . . . . . . . . . . . . . . . . . . . .$302.09

46686 Side-mount bracket ONLY for universal taillight . . . . . . . . . . . . .$82.49

For Softail® Models from 2000 to Present99052 Complete kit with standard taillight . . . . . . . . . . . . . . . . . . . . . . . .$223.89

46851 Complete kit with LED taillight . . . . . . . . . . . . . . . . . . . . . . . . . . . .$295.69

99053 Side-mount bracket ONLY for universal taillight . . . . . . . . . . . . .$82.49

12775

12755

12756

12757

12760

Hinged Side-Mount License SystemKeep your side-mount license plate from getting knocked off by folding itclosed when parking close to other bikes. Hinge has detents in the openand closed positions. Your choice of chrome billet backing plates offer theoption of running with side taillight or not.

Hinge Kits12755 Hinge, bracket and hardware for left or right-side on Softail®

models from 1986 thru 1999 (will not fit with saddlebags) . .$149.95

12756 Hinge and mounting hardware for all models with lower through-bolt on rear shocks. Mounts on left or right-side . . .$104.95

12757 Universal mounting kit with hinge, hardware and weld-on frame tab to locate hinge where desired . . . . . . . . . . . . . . . . . . .$109.95

License Backing PlatesBacking plates drilled with dual pattern to mount close to bike or 1" further out for clearance. Ball milled detail on back, and fit 7" x 4" license plates.12760 Backing plate and license plate trim ring for Cateye taillight

(not included) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$129.95

12775 Backing plate with license illumination light with license plate trim ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$184.95

Reverse Detail

Chrome Axle-Mount License and Taillight BracketsThese CNC-machined chrome-plated beauties are big and beefy. Vertical-mount left-side bracket includes mount for ‘Cateye’ taillight. Horizontalbracket for the right side. Fit Softail® models 1986 thru 1999.47356 Complete left-side kit with mount and taillight . . . . . . . . . . .$202.99

47334 Complete left-side kit without taillight . . . . . . . . . . . . . . . . . . .$187.49

47335 Right-side horizontal license mount only . . . . . . . . . . . . . . . . . .$174.99

47335

47356

46686

46685License Framenot included

Lig

htin

g

5.26


5


RacetrackHorizontal

Radial

Ness-Tech® Chrome TaillightsThree unique designs from Arlen Ness® that give your bike a distinctive look. They are all CNC-machined frombillet aluminum and chromed. The ‘Stock’ versions fit the Original Equipment taillight mounts on all fendersfrom 1973 thru 1998 as well as on 1999 Softail® models (except FLSTS and models with Fat Bob fenders). The‘Custom’ versions are for use in all other fender applications. All of the taillights are available with conven-tional bulb illumination or with LED illumination.

Taillight and Bracket KitsEasy-to-install kits combine our most popular taillights withour top-quality custom license plate brackets for a clean,under-the-fender installation on all FX Softail®, Dyna WideGlide® (FXDWG) and 4-speed FXWG models. Kits are alsoavailable for the CC QuickBob™ fender conversion on 4-speedFX models.

‘Cateye’ Taillight Kits19756 Fits Fat Bob rear fenders on FX Softail® and

4-speed FXWG models . . . . . . . . . . . . . . . . . . . . . . . . .$56.49

19375 Fits Fat Bob rear fenders on Dyna Wide Glide®

models from 1993 thru 1998 . . . . . . . . . . . . . . . . . . .$77.99

19758 Fits QuickBob™ rear fenders . . . . . . . . . . . . . . . . . . . .$57.99

Note: Installation of these accessories may be in violation of FMVSS Standard #108.

19375

ZCB Taillight and License Plate BracketThis custom assembly has an eye-catchingshape and is made from heavy-duty ABSplastic to insure it’s durability. The lenshas an ‘E-Mark’ . . . . . . . . . . . . . .Call for price86313 Bolts to the top of most

custom fenders87028 Replacement lens RBS License Plate Kit with

Turn Signals and Taillightwith TÜVUniversal aluminum taillight assemblycomes with billet aluminum housing,license plate and turn signals. Includes anelectronic resistor for brake light circuit.Has ‘E’ mark on the taillight and turn sig-nal lenses. Available in natural or blackfinish.86636 Polished aluminum kit

with turn signals86057 Polished aluminum kit

without turn signals86637 Black aluminum kit

with turn signal86066 Replacement taillight lens

Chrome Billet Extra-WideTaillights by Pro-One™

Fit all custom 8" and 9"-wide Fat Bob rearfenders, and are available with or withoutbuilt-in amber turn signals. Also featurelicense plate lights with frosted lenses.Measure 65/8"-wide, 3"-tall and 115/16"-thick. Sold each.65527 Without turn signals . . . . .$157.95

65528 With turn signals . . . . . . . . .$162.95

Conventional TaillightsRegular bulb lighting with 12-volt bulbs and allrequired wiring and hardware. . . . . . . . . . . . . .$219.95Stock Custom

05631 05719 Horizontal design05632 05718 Radial design05633 05717 Racetrack design

LED TaillightsIncrease your visibility while adding style. Includesmounting hardware. . . . . . . . . . . . . . . . . . . . . . . . .$299.95Stock Custom

05943 05947 Horizontal design05942 n/a Radial design05941 05945 Racetrack design

Note: Installation of these accessories may be in violation of FMVSS Standard #108. 1998 and later models with Original Equipment ’CircuitBoard Taillight’ rear fenders require CC #46642 taillight adaptor bracket.


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.27


Chrome Derby Cover and Sidemount License by AccutronixA new idea for many Big Twin models, this domed derby cover incorporates a stylish sidemount licenseframe ... or vice-versa.

Chrome Side MountLicense and Light MountThe plate holes are 53/4" x 35/8"center-to-center.12284 License plate

holder . . . . . . . . . . . . .$9.99

15237 Bracket for side mount . . . . . . . . . . . . .$6.99

12284

15237

Swingarm-Mounted Billet License Plate BracketThree-piece design permits mounting on either left or right-side of the swingarm. Will accepta standard Cateye taillight (not included) or any custom taillight with Cateye bolt pattern. Thebacking plate is also available separately. Fit all Softail® models from 1984 to present. . .$149.9914113 Fits Original Equipment Softail® swingarms (11/4" frame diameter)14093 Fits 11/8"-diameter aftermarket swingarms14098 Fits 1"-diameter aftermarket swingarms

Components14114 License backing plate with Cateye mount ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.99

14092 Mount ONLY for 11/8"-diameter swingarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$104.99

Perewitz Side Mount License Plate BracketsA classic custom design has been updated bycustom builder Dave Perewitz for improvedstrength and a hot look. Kits include our topselling chrome-plated die-cast Cateye taillight.42927 For all 5-speed Softail® models

from 1986 thru 1999 . . . . . . . . . . . .$166.49

42925 For all Dyna Glide models from 1991 to present . . . . . . . . . . .$172.49

42926 For all FXR models from late 1987 thru 1999 . . . . . . . . . . . . . . . . .$156.99

42927

42927

42925

4292642925

42925

42926

RST Aluminum Side Mount License PlateBillet aluminum, axle-mounted, license plate mounting brack-et with license plate illumination. Available in black or pol-ished versions.686535 Polished for Softail® models from 1984 thru 1999686536 Black for Softail® models from 1984 thru 1999686537 Polished for Twin Cam 88® Softail® models686538 Black for Twin Cam 88® Softail® models

4458044579

For Big Twin Models from 1999 to Present44579 Derby cover and license frame . .$249.95

44580 Derby cover and license frame with taillight . . . . . . . . . . . . . . . . . . .$419.95

For Big Twin Models from Late 1984 thru 199844593 Derby cover and license frame . .$249.95

44594 Derby cover and license plate with taillight . . . . . . . . . . . . . . . . . . .$419.95

Lig

htin

g

5.28

5


Taillights & Adapters

Doss ‘Tombstone’ Taillight Kit for Late Full-Fender ModelsHot look for Fat Boy® and other models withfull rear fenders. The adapter bolts to andcovers the stock late-model taillight mount,while our popular die-cast ‘Tombstone’ tail-light bolts to the adapter. Kit includes tail-light, heavy-duty chrome-plated stampedsteel adapter, gaskets and hardware. Fits Fat Boy® models without modification from1990 to present. Also fits 4-speed FL models,5-speed FLT, FLHT, FLHS and Road King®

models to present, and Heritage Softail®

models from 1973 to present when turn sig-nals are relocated and turn signal light barremoved.19660 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$107.99

Note: Installation of these accessories may be in violation of FMVSS Standard #108. 1999 andlater models with Original Equipment ’Circuit Board Taillight’ rear fenders require CC #46642taillight adaptor bracket.

Doss ‘Wide Tombstone’ TaillightA larger, restyled version of the 1947 thru 1954 Original Equipment taillightspecially-designed to fit the 1973 thru 2003 Original Equipment fenders and mounts. Turn signals mounted on light bars will need to be relocated.Includes block off plugs for light bar holes. Fits with stock or universal laydown license plate brackets.46400 Fits all models from 1973 thru 1998 as well as 1999 Fat Boy®

and Heritage Softail® models (except FLSTS) . . . . . . . . . . . . . . .$101.69

46409 Fits all Sportster®, Dyna Glide and Touring models from 1999 to present and all Fat Boy® and Heritage Softail® models from 2000 to present (except FLSTS) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$113.99

46214 Rubber spacer required for use with CC #13199 laydown license plate kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.19


Doss Taillight Adapter Bracket for ‘Circuit Board Taillight’ RearFendersTired of being stuck with the stock taillight on your1998 and newer model, because of the way theOEM rear fender is made? Well, here’s the fix. TheDoss taillight adapter permits the use of virtuallyany custom taillight, such as the Aurora or Dosswide Tombstone, on 1999 and later modelsequipped with ‘circuit board’ taillights.46642 Taillight adaptor bracket . . . . . . . . . . . . $24.69


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.29

TaillightsAurora™ Taillight and Lighting Accessories• Hot, Custom Look• Hidden Lens Mounts• Uses Aurora™ or Original Equipment Turn SignalsAn exclusive Custom Chrome® lighting system that blends taillight, stop lightand turning indicators into one gleaming sculpture. Matching front turnindicators provide a total custom look that makes your bike stand out in acrowd. Die-cast, chrome-plated taillight is available with or without turn signals. Fits all models with stock taillight mounts from 1973 to present(except Fat Bob fenders or late ‘Dresser’ models with stock saddlebags).Easily adapted to smooth custom fenders.27000 Complete taillight and turn signal kit with single filament

turn signals and red lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$203.09

27001 Taillight with arms ONLY (uses 1986 to 1998 FXR/Sportster®

model turn signal units) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$116.09

27002 Taillight assembly without arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.99

27009 Replacement gasket for taillight lens . . . . . . . . . . . . . . . . . . . . . . . . .$20.59

698564 Replacement ‘thick’ base gasket for CC #27000 . . . . . . . . . . . . . . . . .$9.49

688271 Replacement ‘thin’ base gasket for CC #27000 . . . . . . . . . . . . . . . . .$6.29

27003 Replacement taillight lens for CC #’s 27000 thru 27002 . . . . . . . .$20.19

688273 Replacement lens attachment screw for CC #’s 27000 thru 27003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49

27005 Clear Aurora™ taillight lens ONLY for Original Equipment taillights from 1973 thru 1998 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.49

27004 Red Aurora™ taillight lens ONLY for Original Equipment taillights from 1973 thru 1998 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99

Note: 1999 and later models with Original Equipment ’Circuit Board Taillight’ rear fendersrequire CC #46642 taillight adaptor bracket.

Aurora™ Turn SignalsThe perfect complement to Aurora™ taillights or a great custom look bythemselves. Bolt directly to Original Equipment turn signal stalks from 1973to present (except FL-style). Twin circuit, two filament bulbs for both runningand turn signals. Sold in pairs.27020 Aurora™ turn signal set with red lenses . . . . . . . . . . . . . . . . . . . . . . .$84.79

27021 Aurora™ turn signal set with amber lenses . . . . . . . . . . . . . . . . . . . .$84.79

27008 Replacement red lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.89

27029 Replacement amber lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . .$15.49

Aurora™ Marker Light SetsA perfect match to the Aurora™ line or for a original custom look. Chromehousing, universal mounting, 12 volt, single filament bulb and lead wire.Sold in pairs.27023 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.99

27024 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.99

Replacement LensFor Aurora™ markerlite sets (CC #’s 27023, 27024) sold each.27027 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.69

27028 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.89

design by john reedU.S. Design Patent #422,721

27000

27002

27021

U.S. Design Patent #422,722

Doss LED Triple Light KitConsists of a Doss ‘Wide Tombstone’ taillight (CC #46400) and a set of ourpopular LED bullet marker lights (CC #47664). Completely assembled withthe chrome stand-offs already installed. . . . . . . . . . . . . . . . . . . . . . . . . . . .$179.9962390 Fits all models from 1973 thru 1998 as well as 1999 Softail® models

(except FLSTS and models with Fat Bob fenders)Note: Installation of this accessory may be in violation of FMVSS Standard #108. The markerlights are designed as supplemental lighting ONLY, and should not be used to replace Original Equipment running lights or turn signals.

627381627382

627380

Lig

htin

g

5.30

5


Laydown Taillight & License Bracket

Laydown License Bracket for Touring Models by Darrell Hayes Custom ConceptsDramatically improve rear styling on Touring modelswith the angled license bracket and rear fender braceassembly. It moves the license plate both closer to thefender and angles it for a smoother, flowing look(brackets do not work with luggage rack or oversizelicense plates).

Angled License and Rear Fender Brace Assembly15669 Fits all Touring models from 1997 to present

(repl. OEMs 53422-97, 53376-97) . . . . . . .$107.89

15668 Fits Road King® and FLHS models from 1993thru 1996; FLT and FLHT models from 1995 thru 1996 (repl. OEM 47400-92) . . . . . . . .$107.89

Replacement Parts15667 Angled license mounting plate ONLY.

Fits Road King® models from 1997 to present (repl. OEM 53376-97) . . . . . . . . . . .$48.99

Note: The Original Equipment fender brace is longer than that in thekits. When installed on the stock brace, the plate extends further tothe rear and larger plates may contact the taillight.

‘Laydown’ Taillight LensesMaintain your fender’s flowing lines by simply bolting on one of these lenses. They look greatwhen combined with one of our popular Laydown License Frames, and fit most models from1973 to present. Installation of the clear lens requires the use of one of our ‘Super Hi-Intensity’red taillight bulbs.

For all Models from 1973 thru 1998 and 1999 Softail® Models09710 Red lens ONLY (replaces OEMs 68034-77, 68033-90) . . . . . . . . . . . . . . . . . . . . . . . . .$26.1909818 Red ‘Blackout’ lens ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.7909714 Clear ‘Blackout’ lens ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.7915141 Super Hi-Intensity red taillight bulbs (box of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99 ea.

For most Models from 1999-Early 2003Will not fit Deuce™ or FLSTS models. Uses the Original Equipment bulb socket assembly.27376 Red lens with reflector (replaces OEM 68140-99) . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.69

For most Models from Late 2003 to PresentWill not fit Deuce™ or FLSTS models. Mates to the 4-pin AMP connector.627383 Red lens with reflector (replaces OEM 68369-03) . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.49627384 Red ‘Blackout’ lens with reflector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.99Note: Installation of these accessories may be in violation of FMVSS Standard #108.

09714

‘Laydown’ Taillight Lenses with LED LightsDo wonders for your bike by adding one of these stylish taillight lenses.• Combine with a Laydown license frame for a great look• Most lenses feature ‘blacked-out’ outside walls for a

dimensional look• Equipped with LED lights and “pig-tail” plug-in

or 4-pin AMP connectors for an easy installation• Fit most models with Original Equipment taillights

from 1973 to present

For all Models from 1973 thru 1998 and 1999 Softail® ModelsThese lenses plug into the stock taillight bulb socket(replace OEM 68034-77 and 68033-90 taillight lenses).09723 Clear ‘Blackout’ lens . . . . . . . . . . . . . . . . . . .$73.99

09728 Red ‘Blackout’ lens . . . . . . . . . . . . . . . . . . . .$73.99

For most Models from 1999 to PresentThese lenses plug into the Original Equipment 4-pin AMP connector on the fender (replace OEM 68140-99 and 68369-03 taillight lenses).627380 Red laydown lens . . . . . . . . . . . . . . . . . . . . . .$68.99

627381 Red ‘Blackout’ laydown lens . . . . . . . . . . .$73.99

627382 Clear ‘Blackout’ laydown lens . . . . . . . . . .$73.99Note: Installation of these accessories may be in violation of FMVSS Standard #108.Note: There are two different styles of reflecting patterns on the lenses.CC #’s 09723 and 09728 have a square reflector pattern.CC #’s 627380, 627381 and 627382 have a vertical reflector pattern.

09710

09723 Red Taillight and Turn Signal BulbsStandard BulbRed-coated light bulb is ideal for use with clearlenses. 12-volt dual element bulb replaces 1157R. . . . . . . . . .$3.79 ea.15184 Box of 10

Super High-Intensity BulbThis red-coated light bulb is rec-ommended for use with our clearlenses. The 12-volt dual elementbulb is rated at 50/14 candlepowerinstead of the standard 32/3 can-dlepower and replaces an 1157R. . . . . . . . . . . . . . .$5.99 ea.15141 Box of 10

27376

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.31

Taillights


Replacement LED Taillight AssemblyChrome die-cast taillight assembly comes complete with a high-tech LEDarray and all required hardware to replace the Original Equipment unit fitted to many models since 1973 and in custom applications. . . . . . . .$64.4946848 Fits all models from 1973 thru 1998 as well as 1999 Softail® modelsNote: Installation of this accessory may be in violation of FMVSS Standard #108.

Black-Out and Custom Taillight LensesOur blacked-out taillight lenses provide a striking new look with smallerlicense plate illumination windows. Custom lenses are the same, but with-out the black-out feature. Fits all models from 1973 thru 1998 as well as1999 Softail® models (except FLSTS models).12950 Blackout lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.99

12951 Blackout lens with blue dot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99

12824 Custom lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.99

12825 Custom lens with blue dot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99


12951 12950

Diamond LED Taillight for Cateye MountsAttractive chrome billet aluminum housing has LED array with two bright-ness levels for taillight and brake light. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$273.9947620 Fits standard Cateye mountsNote: Installation of these accessories may be in violation of FMVSS Standard #108.

Aurora™ Taillight LensAn exclusive Custom Chrome look. Matching turn signals and marker lightsare also available elsewhere in this section. Sold each. . . . . . . . . . . . .$18.9927004 Fits all models with Original Equipment taillights from 1973 thru

1998 as well as 1999 Softail® models (except FLSTS models)

Original Style TaillightChrome reproduction of the Original Equipment partused on most models from 1955 thru 1972.12511 Taillight (repl. OEM 68010-64B) . . . . . . . . .$34.49

12952 Red plastic replacement lens . . . . . . . . . . . . .$4.99

26236 Red glass replacement lens . . . . . . . . . . . . .$16.99

12966 Red plastic lens with blue dot . . . . . . . . . . . .$9.49

26237 Red glass lens with blue dot . . . . . . . . . . . .$22.99

12510 White plastic replacement license plate lamp lens . . . . . . . . . . . . . . . . . . . . . . . . . .$4.19

19481 Lens gasket (pack of 10) . . . . . . . . . . . . . . . .$15.49

19482 Fender gasket (pack of 10) . . . . . . . . . . . . . .$16.99

19773 Chrome 2-hole license bracket . . . . . . . . . .$21.49

19770 Chrome 3-hole license bracket . . . . . . . . . .$19.99

Maltese Cross II Taillight by Paul Yaffe OriginalsIf you thought the original Maltese Cross taillight was cool, check out the Maltese Cross II!Features sequential turn signals in the right and left arms. Mount this taillight on or in yourrear fender and the turn signals are built right in. Superbright LED’s and exclusive PYO strob-ing brake light along with waterproof solid state circuitry, makes for safety. Machined from6061-T6 billet aluminum and flawlessly chrome-plated. Steel shadow box is available for a frenching applications (sold separately).600046 Maltese cross II taillight with turn signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$591.99

600079 Flush mount shadow box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.99

Note: Load equalizer for bikes with self-cancelling functions required.

Lig

htin

g

5.32

Taillights


5 Tombstone TaillightSuperbly crafted chrome die-cast replica of thetaillight used from 1947 thru 1954. Includes achrome license mount, black rubber mountinggasket and 12-volt bulb.19644 Complete taillight (plastic lens)

replaces OEM 68003-47 . . . . . . . .$33.49

19645 Plastic red lens with gasket . . . . .$5.29

12965 Plastic red lens with blue dot and gasket . . . . . . . . . . . . . . . . . . . . .$9.49

19670 Plastic clear lens . . . . . . . . . . . . . . . .$4.99

19671 Chrome red lens bezel . . . . . . . . . .$7.99

19654 Fender mounting gasket (sold each) . . . . . . . . . . . . . . . . . . . . .$3.49

19646 License bracket . . . . . . . . . . . . . . . . .$6.49

19668 Red lens gasket (pack of 10) . . .$10.99

19669 Clear lens gasket (pack of 10) . .$10.99

Note: Limited lens surface area does not meet modern DOT standards. CC does not recommend these taillights on vehicles newer than 1954.

Tombstone Taillight with TÜVA 12-volt replacement for the Original Equip-ment part that includes the license plate bracket,hardware and mounting gasket. . . . . . . . . .$66.9984588 Replaces OEM 68003-47T

Beehive TaillightReproduction of the taillight used on manymodels from 1939 thru 1946. Universal fendermounting for most applications. Includeschrome license mount, black rubber mountinggasket and 12-volt bulb.26357 Complete taillight (plastic lens)

replaces OEM 68002-47 . . . . . . . . .$49.69

26358 Plastic red lens . . . . . . . . . . . . . . . . . .$7.99

26359 Plastic clear lens . . . . . . . . . . . . . . . . .$6.49

26360 License bracket . . . . . . . . . . . . . . . . . .$7.99

26361 Mounting gasket (sold each) . . . . .$3.99

Note: Limited lens surface area does not meet modern DOT standards. CC does not recommend these taillights on vehicles newer than 1954.

Custom Dual TaillightMeasures only 60mm diameter and license platelight, mounted onto a 150mm wide aluminumplate to fit aftermarket Fat Bob rear fenders.

Not approved as a license plate light!85863 Taillight with ‘E’-mark . . . . . . . . . .$83.39

84970 Replacement bulb, 12V21W (box of 10) . . . . . . . . . . . . . . . . . . . . . .$2.01 ea.

84856 Replacement bulb, 12V5W (box of 10) . . . . . . . . . . . . . . . . . . . . . .$5.79 ea.

LED Mini Taillight with EG ABEAvailable either in polished billet aluminum or steel. The aluminum version has two threaded holes onthe back to be mounted directly to the fender. The steel version can be welded onto or into the fenderand then painted. Does not include license plate illumination. Mounting hardware is included. Allparts are sold separately.686366 LED mini taillight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.69

686367 Billet aluminum housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$137.39

686368 Steel weld-in housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66.59

686367

686368

LED Taillight Conversion Kit by AdjureMake sure they notice you with this LED kit that converts yourstock incandescent taillight into a brighter, longer lasting, LEDtaillight. It includes a new taillight lens and a 39 LED PC-boardthat plugs right into the original bulb socket on models from1973 thru 2002, or plugs right into taillight connector socketon models from 2003 to present. Installs in minutes with nowire splicing.634063 Fits all models from 1973 thru 2003 and Softail® mod-

els from 1973 thru 1999(except FLSTS models) .$99.95

634064 Fits all models from late 2003 to present (except Deuce™ models) . . . . . . . . . . . . . . . . . . . . . .$107.00

Note: Load equalizer not required

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.33

Taillights & License Plate Mounts


Complete Taillight Assemblies with LED ElementsInclude our Custom Chrome® taillights with spe-cial high-intensity LED arrays in place of the tra-ditional bulb. Arrays include rear-facing redLEDs and clear LEDs pointed toward license illu-mination window.47625 1955 thru 1972 OEM-style . . . . . . .$144.99

47627 Custom Fat Bob taillightwith chrome bracket . . . . . . . . . . . .$186.99

47625

8605986058

19899

340306

Mini and Micro Cateye Taillights with License Plate Bracket and TÜVABS Cateye taillights with aluminum license platebrackets to mount on the fender. Available intwo sizes. The Micro Cateye measures 65mmwide x 42mm tall. The Mini Cateye measures80mm wide x 55mm tall. Made of heavy-dutyABS plastic to last for years. The taillights are alsoavailable separately in black or chrome.

Chrome Taillight Assemblies86058 Assembly with micro taillight . . . .$22.79

86059 Assembly with mini taillight . . . . . .$22.79

84985 Micro taillight ONLY . . . . . . . . . . . . .$13.19

19377 Mini taillight ONLY . . . . . . . . . . . . . .$24.49

Chrome Taillight Assemblies with TÜV686601 Assembly with micro taillight686602 Assembly with mini taillight686603 Micro taillight ONLY686604 Mini taillight ONLY

Black Taillights with TÜV686605 Micro taillight ONLY686606 Mini taillight ONLY

‘Snake Eye’ TaillightWide and sleek custom taillights with a polishedaluminum bracket to mount on all fenders(except Fat Bob fenders). Made from heavy-dutychrome ABS plastic. Taillight measures approxi-mately 160mm x 40mm.86060 Taillight with bracket . . . . . . . . . . . .$27.69

19380 Taillight ONLY . . . . . . . . . . . . . . . . . . .$27.49

686600 Taillight with bracket with TÜV686607 Taillight ONLY with TÜV

‘Sparto’ Taillights with TÜVThese early 1950’s “chopper” style taillights feature die-cast construction and are availablewith a 12-volt bulb or a high-output LED. Thetaillight is also available with powder coatedblack, chrome or polished finishes. Not DOT approved.340306 Powder coated black . . . . . . . . . . . .$43.99

19899 Chrome . . . . . . . . . . . . . . . . . . . . . . . . .$35.99

686599 Chrome with TÜV approval340308 Polished . . . . . . . . . . . . . . . . . . . . . . . . .$37.99

46847 LED Taillight . . . . . . . . . . . . . . . . . . . . .$52.49

47627

LED Snake Eye TaillightFeatures 60 LED’s for maximum light intensityinside a durable chrome ABS housing and clearlens for license plate light. Mounting holes arespaced at 2" center-to-center using a 1/4"-20mounting stud. Taillight measures 61/8"-long,11/2" x 2"-high and 2"-deep. 30" wire harnesswith sheathing. . . . . . . . . . . . . . . . . . . . . . . . . . .$97.99600206 Sold each

Universal TaillightIncludes 12-volt bulb and mounting screws.12512 Taillight . . . . . . . . . . . . . . . . . . . . . .$15.49

12513 Lens only . . . . . . . . . . . . . . . . . . . . . .$6.49

12523 Replacement dual filament bulb (box of 10) . . . . . . . . . . . . . . . . . . . . .$1.55 ea.

Note: Installation of these accessories may be in violation ofFMVSS Standard #108.

Lig

htin

g

5.34


5


Oval Taillight Kits with Brackets for Fat Bob FendersA new look for bikes with Fat Bob fenders isavailable in this taillight kit from CustomChrome®. Includes the new Oval taillight withlicense illumination window and chrome-platedcustom-style bracket. . . . . . . . . . . . . . . . . . .$147.8419374 Fits Fat Bob fenders on Dyna Wide

Glide® models from 1993 to present

Component and Replacement Parts19372 Oval taillight assembly . . . . . . . . . .$50.99

19371 Replacement red lens with blue dot ONLY . . . . . . . . . . . . . . . . . . . . . . .$17.49

19905 Bracket for FX Softail® and 4-speed FXWG models with Fat Bob fenders . . . . . . . . . . . .$56.09

19370 Bracket for Dyna Wide Glide®

models . . . . . . . . . . . . . . . . . . . . . . . . .$61.69

Snake Eye Taillight Kits for Fat Bob FendersUnique variation of the classic Cateye design.The wide design will set your bike apart at anystoplight. Available in conventional and LED ver-sions. Made of heavy-duty, chromed ABS plasticto last for years. Mounting holes are spaced at2" center-to-center using a 1/4"-20 mountingstud.Note: Installation of these accessories may be in violation ofFMVSS Standard #108

Taillights with Brackets19381 For FX Softail® and 4-speed FXWG

models from 1980 to present . . . .$57.99

647530 Same as CC #19381 but with LED taillight . . . . . . . . . . . . . . . . . . . . . . . .$133.20

19382 For CC QuickBob fenders on FX 4-speed models . . . . . . . . . . . . . . . . . .$59.49

Replacement Parts19380 Taillight ONLY . . . . . . . . . . . . . . . . . . .$27.49

19364 Red lens . . . . . . . . . . . . . . . . . . . . . . . . . .$3.49

19363 Lens gaskets (pack of 10) . . . . . . .$1.25 ea.

Custom Taillight/Turn SignalContoured to fit bobtail fenders on FXST andFXWG models 1980 to present (except newermodels with “circuit board” taillight), this cus-tom taillight features a unique lighting systemwhich incorporates both the brake light andturn signals into one unit. It also features a slot-ted lens cover for a truly custom look. Bracketsold separately, Uses common light bulbs.340466 Taillight/turn signal assembly . . .$105.99

Diamond Taillight and LicenseBracket KitsThe Diamond taillight is matched with a chromefender bracket for these great, easy-to-installkits. The taillight lens looks great when lit.Includes license illumination window. Chromedie-cast construction. . . . . . . . . . . . . . . . . . . . .$63.9919939 Fits Fat Bob fenders on FX Softail® and

4-speed FXWG models from 1980 topresent. Also fits CC stock replacementFat Bob fenders

19941 Fits Fat Bob fenders on Dyna Wide Glide®

models 1993 to present19940 Fits QuickBob™ fender kits on 4-speed FX

and Sportster® models

Component and Replacement Parts19884 Diamond taillight assembly

(Cateye mount) . . . . . . . . . . . . . . . . .$33.49

19938 Replacement red lens . . . . . . . . . . . . .$6.49

19757 Bracket for FX Softail® and 4-speed FXWGmodels with Fat Bob fenders . . . . .$40.99


models . . . . . . . . . . . . . . . . . . . . . . . . . .$61.69

19759 QuickBob™ mounting bracket . . . .$45.49

19939

340466

340466

Mini Cateye TaillightUnique variation of the classicCateye design. The design will setyour bike apart at any stoplight.Made of heavy-duty, chromed ABSplastic. Mounting holes are spacedat 2" center-to-center using a 1/4"-20 mounting stud.19377 Taillight ONLY . . . . .$24.49

Replacement Parts19366 Red lens . . . . . . . . . . . .$5.79

19365 Lens gaskets (pack of 10) . . . . .$1.25 ea.

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.35



Extra-Wide Fat Bob Taillight by Pro-One™

Extra-wide taillight fits most brackets for 8" to 9"-wide Fat Bob rear fenders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.9565474 Sold each

Flush Mount Teardrop TaillightsAdd smooth, street-rod styling toyour custom fender installationwith this clever design. The avail-able recessed teardrop bucketmakes installation easy.65307 Taillight with

red lens . . . . . . . . . .$47.95

65308 Taillight with blue dot lens . . . . .$52.95

65309 Bucket for mounting taillights . . . . . . . . .$29.95

Note: Check available clearance betweentire and fender before mounting. Depthcan be trimmed slightly.

340305

Custom Taillight and Bracket Kits for Fat Bob FendersFills the entire area on most Fat Bob rear fenders, (exceptDyna Wide Glide® models) and isavailable with a chrome OriginalEquipment-style bracket or achrome-plated custom bracket.Fit FX Softail® and 4-speed FXWGmodels with Fat Bob rear fendersfrom 1980 to present, and CC #’s26433, 13206 and 13204 Fat Bobrear fenders.19900 Kit with Original Equipment-style bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.99

19907 Kit with custom bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$92.49

19903 Red lens with jeweled blue dot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.99

Replacement Parts19904 Taillight assembly ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$51.99

19902 Original Equipment-style bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99

19905 Custom bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$56.09

19901 Red lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99

Note: Installation of this accessory may be in violation of FMVSS Standard #108.

19900

19907

Cateye Taillights with TÜVThe most popular taillight on the market with TÜV approval!Available with chrome-plated die-cast or black anodized alu-minum housings, 12 volt bulb, and built-in license plate illu-mination. Mounting studs are spaced 2" center-to-center for a variety of applications. Sold each.19762 Chrome die-cast taillight . . . . . . . . . . . . . . . . . . . . . .$27.49

340305 Chrome die-cast taillight with blue dot lens . . .$27.49

85861 Chrome die-cast taillight with TÜV . . . . . . . . . . . .$29.99

86061 Black-anodized aluminum taillight with TÜV .$205.79

12522 Replacement bulb for CC #19762 (box of 10) .$1.10 ea.

12968 Red lens with jeweled blue-dot . . . . . . . . . . . . . . . . .$10.99

19763 Replacement red lens for CC #19762 . . . . . . . . . . .$7.99

19764 Replacement white license plate lens . . . . . . . . . .$4.99

86061

1976285861

Lig

htin

g

5.36

Taillights

5


Late TaillightOriginal-style taillight for all models from 1973thru 1998 as well as 1999 Softail® models (exceptFLSTS and models with Fat Bob fenders).26100 Taillight (repl. OEM 68008-73A) . .$37.99

26110 Replacement lens . . . . . . . . . . . . . . . . .$6.49

12962 Taillight lens with blue dot . . . . . . .$15.49

09700 Lens trim ring . . . . . . . . . . . . . . . . . . .$15.49

09699 Chevron grill . . . . . . . . . . . . . . . . . . . .$14.84

09695 Chevron grill with red plastic lens and blue dot installed . . . . . . .$25.94

19483 Fender mounting gasket (pack of 10) . . . . . . . . . . . . . . . . . . . . . .$9.99

19770 3-hole license bracket . . . . . . . . . . . .$19.99

Replacement Parts for Late Taillights26039 Lens screws (repl. OEM 68026-73)

pack of 10 . . . . . . . . . . . . . . . . . . . . . . . .$9.99

26040 Lens gaskets (repl. OEM 68025-73) pack of 10 . . . . . . . . . . . . . . . . . . . . . . .$27.49

26041 Mounting speed nuts (repl. OEM 7501) pack of 10 . . . . . . .$4.84

Note: Installation of these accessories may be in violation ofFMVSS Standard #108. 1998 and later models with OriginalEquipment ’Circuit Board Taillight’ rear fenders require CC #46642 taillight adaptor bracket.

Ness-Tech® Cateye TaillightsUltra-slim, chrome billet taillights measure a paltry 1"-thick. They have top grooves for license plateillumination, and are available with or without a custom mount for smooth rear fenders. The taillightsONLY may be mounted on any flat surface and have the same bolt pattern as regular Cateye taillights.All taillights are available with conventional bulb illumination or with LED illumination.

Conventional TaillightsRegular bulb lighting with 12-volt bulbs and all required wiring and hardware.Angled Horizontal

05659 05660 Taillight with mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$209.95

05661 05662 Taillight ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.95

LED TaillightsIncrease your visibility while adding style. Includes mounting hardware.Angled Horizontal

05863 05864 Taillight with mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$269.95

05861 05862 Taillight ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$199.95

Replacement PartsThese items are for the Conventional Taillights.05239 10 watt and 5 watt bulb kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99

05238 Replacement lens kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.95


HorizontalTaillight ONLY Angled Fender

Mount Taillight

Custom Oval Taillight for Fat Bob FendersFits Custom Chrome® Fat Bob brackets forcustom taillights. Or create a custom mountfor other applications. Includes license illu-mination window and 12-volt bulb.19372 Taillight assembly . . . . . . . . . . .$50.99

19371 Replacement red lens ONLY with blue dot element . . . . . .$17.49

Chrome Fender Brackets19905 Bracket for FX Softail®

and FXWG models with Fat Bob fenders . . . . . . . . . . . . .$56.09


models . . . . . . . . . . . . . . . . . . . . .$61.69

19371

19372

Maltese Cross TaillightComplete with 12-volt bulb. Universal mount.19649 Taillight . . . . . . . . . . . . . . . . . . . . . . . . .$16.99

19650 Lens only . . . . . . . . . . . . . . . . . . . . . . . . .$5.79


LED Mini Taillight with E-MarkNew taillight for 2004. Includes brake and tail-light with aluminum housing, but does not havelicense plate illumination . . . . . . . . . . .Call for price686822 Chrome housing686820 Polished housing686821 Matt black housing

‘Speed’ LED Mini Taillight with E-MarkNew taillight for 2004. Includes brake and tail-light and license plate illumination in a chromedABS plastic housing.686823 ‘Speed’ LED

Mini Taillight . . . . . . . . . . . . . . .Call for price

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.37

Taillights


’Lucas’ Taillight with TÜVThe TÜV-approved versionincludes a chrome licensemounting bracket.86205 Taillight assembly

with TÜV (chrome bracket) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.24

84866 Taillight assembly without TÜV (polished bracket) . . . . . . . . . . . .$25.79

19647 Taillight ONLY without TÜV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.99

86206 Replacement lens with TÜV . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37.29

19648 Replacement lens without TÜV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99

12959 Lens with blue dot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49

85874 Replacement lens gasket only (sold each) . . . . . . . . . . . . . . . . . . . . .$2.49

Bullet Style Universal TaillightThis die-cast metal taillight assembly has the look and feel of the heavychrome accessories of years past. Chrome plated and featuring thick rubbermounting gaskets. Custom mounting required, universal mounting hard-ware included. All use standard 1157 dual filament bulbs, and have plasticlenses. Not D.O.T. approved.Universal taillight uses a custom base and license plate bracket to transforma turn-signal housing and lens into a unique taillight assembly. The red lensfeatures a clear window at the bottom for license plate illumination.340480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99

‘39’ Style Taillight with L.E.D.Take a trip down memory lane by adding a classic touch of 1939.• Great match with 39’ style marker lights

(CC #27042, page 5.65)• Equipped with red L.E.D.’s• Fits most Harley-Davidson® models from 1973

thru 1998 with OEM style fender and modelsfrom 1999 to present with (CC #46642) adapterbracket (except Fatbob fenders)

27040 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$107.89

High-Visibility Taillight by Velocity MotorcycleThe Velocity taillight uses Ultra Bright LED technology to increase your visibility and safety. These LED's were developed specifically for use in taillights, and emit light at a specific wavelength that is not “washed out”by light from the sun. This taillight has superior performance to LEDupgrades in existing taillights. Unlike stock style lenses designed for singlebulb “point” source lighting, the Velocity taillight lens is designed to utilizethe LED array for maximum effect. Estimated 100,000-hour bulb life. Die cast chrome plated construction, includes built in license plate light. Not DOT approved. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$139.99340400 Fits all models 1973 to present

Lig

htin

g

5.38

Taillight Covers & Visors

5


Chrome Die-Cast Cateye Taillight CoverDie-cast chrome grill that fits over the existing lens for an easy instant custom look. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$20.9978504 Sold eachNote: Installation of this accessory may violate FMVSS Standard #108

Taillight VisorFits all Harley® models from 1973 to present (except FXWG and FXST).340276 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49

Chrome Visor for Tombstone TaillightPrecision-formed steel visor installs in minutesand is held firmly in place between the lens and the bezel. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.9915179 Fits all Tombstone taillights

Louvered Taillight Visor by KüryAkyn™

Louvered and chrome-plated visor is made of a durable composite material. It fits the late-style taillight on all models from 1973 thru 1998 as well as 1999 Softail® models (except FLSTS and models with Fat Bob fenders). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.4948021 Chrome taillight visor

Turn Signal VisorsFits FL style turn signals from 1963 thru 1984. Sold in pairs.330043 Gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49

Fits front FLHT and FLST models from 1986 to present. Sold in pairs.330035 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.34

330045 Gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99

330043

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.39

Taillight Covers & Visors


Chrome Skull Taillight CoverDress-up your ‘Tombstone’ taillight with one of these beauti-ful chrome-plated die-cast covers. give your Tombstone the‘Skull’ treatment (taillight not included). . . . . . . . . . . . . . .$36.4998649 Skull coverNote: Cover will not fit stock ‘Tombstone’ taillight on FLSTS models.Installation of these accessories may be in violation of FMVSS Standard #108.

Chrome Light VisorsSmartly designed and easy-to-install chrome visors for most models.15164 Taillight visor for 1955 thru 1972 taillights (repl. OEM 68014-88T)

sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99

15165 Spotlamp visor (repl. OEM 67783-78T) sold in pairs . . . . . . . . . . . . . . . . . . . . . . . . .$7.99

15166 Bullet light visor – 13/4" (repl. OEM 67785-78T) sold in pairs . . . . . . . . . . . . . . . . .$2.59

Turn Signal VisorsSold in pairs.15175 Fits the front of FLHT, FLHTC, FLHS, Road King® and FLSTC models

from 1986 to present (repl. OEM 67734-88T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.04

15176 Fits the front of FLTC 1988 thru 2003; rear on FLTC, FLHT, FLHTC, FLHS, Road King®, FLST, FLSTC, FXRD and FXRT models 1986 to present (repl. OEM 67737-88T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.54

15167 Fits the front of all 4- and 5-speed FL and FLHT models from 1963 thru 1985 or the rear of all 4-speed FL and 5-speed FXRT models from 1963 thru 1985 (repl. OEM 67786-86T) . . . . . . . . . . . . . . . . . . . . . . . .$6.79

15164

15165

15167

15166

‘Live To Ride’ Embossed VisorsChrome-plated steel visors feature an embossed eagle carrying a banner which says ‘Live to Ride’.15220 Taillight visor for all models from 1973 thru 1998 as well as 1999

Softail® models (except FLSTS and models with Fat Bob fenders) . . . . . . . . . .$13.19

15221 Headlight visor for all 53/4" bottom and side-mount headlights . . . . . . . . . . . . .$9.49

15222 Headlight visor for 7" headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.09

15223 Turn signal visors for the front of all 4- and 5-speed FL and FLHT models from 1963 thru 1985 or the rear of all 4-speed FL and 5-speed FXRT models from 1963 thru 1985 (sold in pairs) . . . . . . . . . . . . . . . . . .$11.29

15222

15220

15223

15221

Chrome Taillight VisorsFeatures a cut-out for license plate illumination. Fits the late-style taillight on all models from 1973 thru 1998 as wellas 1999 Softail® models (except FLSTS and models with FatBob fenders). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.5912299 Plain (replaces OEM 68006-83T)

Inferno Taillight Trim KitIncludes precision laser-cut stainless steel Inferno insert, clearlens cover and chrome-plate trim ring for a hot look.09720 Fits stock-style taillights on all models from 1973 thru

1998 as well as 1999 Softail® models (except FLSTSand models with Fat Bob fenders) . . . . . . . . . . . .$45.49

09722 Replacement clear lens cover . . . . . . . . . . . . . . . . . . .$6.49

Lig

htin

g

5.40

5


License Plate Frames

Ness-Tech® Radius License FrameCurved lines give a great modern look. Does notexpose mounting hardware. CNC-machinedfrom 6061-T6 billet and finished in chrome. Fullradius frames will work for most license plateinstallations. Sold each. . . . . . . . . . . . . . . . . . .$49.9505580 Fits 7"-wide x 4"-tall license plates

BackOFF® LED License Plate FrameLoaded with 16 dual circuit LED’s, this licenseplate frame doubles as auxiliary running andbrake lights. Simple three wire, color-codedinstallation takes only minutes. Ultra-brightLED’s have a 20,000 hour life span. Fits licenseplates up to 73/16" x 41/4". . . . . . . . . . . . . . . . .$58.94240195 Sold each

License Mounting Screws240130 Mounting screw set. Includes 4 screws,

acorn nuts and washers . . . . . . . . . . .$4.19

Chrome License Plate Trim KitThis chrome license plate frame measures 71/4" x 41/4". Mounting holes measure 53/4" x 23/4" center-to-center. . . . . . . . . . . . .$15.49240136 License plate trim set (includes frame,

backing plate and mounting screw set)

Deluxe Chrome License Plate FrameThree-dimensional die-cast frame with emblemand border design. Fits license plates that meas-ure 7" x 4" with plate hole dimensions measur-ing 53/4" x 23/4". . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.6419760 Sold each

Ace Metal License Plate FramesJewelry-grade conchos decorate these CNC-machined billet aluminum parts. The Iron Crossand 8-Ball are glossy baked ceramic on a heavymetal base. The 3-D Skull is a polished nickelcasting with a dark background. Each concho ishandmade in the USA. Sold each. . . . . . .$71.9906050 3-D Skull06051 8-Ball06052 Iron Cross (not available in Europe)

Polished ‘Skull’ License Plate FrameSand cast in aluminum from a hand-carved moldand polished, this frame has impressive detail.Fits the standard 7" x 4" license plate used inmost states. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$47.7937857 Sold each

Ness-Tech® License Frames with LightsChrome-plated billet license frames with custombuilt-in marker lights. The light mounting sur-face machined at a 45° angle for side visibility.Fit standard plates (7" x 4"). . . . . . . . . . . .$119.9505208 Amber05210 RedNote: Marker lights designed to be used as supplementallighting only.

Replacement PartsSold each.05215 Amber replacement lens . . . . . . . . .$3.94

05214 Red replacement lens . . . . . . . . . . . .$3.94

05216 Replacement light bulb . . . . . . . . . .$1.95

Chrome License Bracket by Pro-One™

Billet bracket mounts the license plate to the left-side upper and lower belt guard tabsof most Softail® frames. Can be used with all standard three hole fender mount license frames. . . . . . . . . . . . . . . . . . . . . . . . . . .$94.9565468 Billet license bracket

‘Whiskers’ Marker LightsCustom License Plate Frames with LightsMilled from 6061 billet aluminum. Availablewith vertical marker lights (shown) or with the lenses in horizontal orientation (backing plate and hardware not included).36921 ‘Whiskers’ license plate kit

with vertical lenses (shown) . . . . .$139.95

36945 ‘Whiskers’ license plate kit with horizontal lenses . . . . . . . . . . .$139.95

05867 Replacement halogen bulb (5 watt) sold each . . . . . . . . . . . . . . . . . . . . . . . .$10.99

12890 Replacement halogen bulb (10 watt)sold each . . . . . . . . . . . . . . . . . . . . . . . .$10.49

Note: Use as supplemental lighting only. Not to replace stockrunning lights or turn signals.


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.41

License Plate Frames

Eagle License Plate FramesFeature soaring eagles at the base of these die-cast frames. They fit licenseplates measuring 7"-wide x 4"-tall whose mounting hole dimensions are53/4" x 23/4".19157 Chrome and gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.49

19155 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.99

Note: These frames may not be compatible with the license bracket on 5-speed FLT, FLHT, FLHS and Road King® models, or with CC #’s 13199, 14199 custom license brackets.

‘Live To Ride’ License Plate FramesThese frames match our other ‘Live To Ride’ covers, and fit most licenseplates measuring 7"-wide x 4"-tall whose mounting hole dimensions are53/4" x 23/4".18935 Chrome ‘Eagle Spirit’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.99

19105 Chrome ‘Live To Ride’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.59

18936 Gold ‘Eagle Spirit’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$50.99

19106 Gold ‘Live To Ride’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.14

19105 19106

18936 18935

1915719155

Chrome License Plate Frames by Pro-One™

Chrome-plated billet frames fit the most common 7" x 4" license plates and come complete with stainlessmounting screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.9565066 Ball milled65067 Smooth

Doss License Plate FramesHot looking design by master-customizer Rick Doss. Chrome-plated die-cast construction for 7"-wide x 4"-tall license plates. Frame only or with license plate illumination light to keep the law looking elsewhere. Includes chrome hardware.46056 Frame with illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.49

46055 Frame without light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.89

StreetWavez™

Programmable LicensePlate FrameChrome-plated license frame has aunique feature ... a scrolling text mes-sage that lights up in red LEDs. Itcomes with a programmable remotethat can store up to four differentmessages, and at the click of a button,can upload one of the messages to thelicense frame display. The messagelights up in full when when yourbrakes are first applied, and scrollsyour message after they’re released.Fits all models with license plates thatmeasure 7" x 4" (except Road King®

and ‘Touring’ models). . . . . . . . .$240.70699991 Complete kit

623401

623400

Polished ‘Skull’ Chain Link and Maltese Cross Plate FrameSand cast in aluminum from a hand-carved mold and polished, this framehas impressive detail. Fits the standard 7" x 4" license plate used in moststates. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.14623400 Chain Link 623401 Maltese Cross (not available in Europe)

Lig

htin

g

5.42

5


License Plate Frames & Accessories

Motorcycle License Plate FramesAmerican-made frames for license plates meas-uring 7"-wide x 4"-tall whose mounting holedimensions are 53/4" x 23/4". . . . . . . . . . . . . .$15.9913682 Chain13684 Twisted

13682

13684

Chrome License Plate AccessoriesBacking Plate19885 Fits plates measuring 7"-wide x 4"-tall

whose hole dimensions are 53/4" x 23/4" . . . . . . . .$7.14

Plate Frame15954 Fits plates measuring 7"-wide x 4"-tall

whose hole dimensions are 53/4" x 23/4" . . . . . . . .$5.49

Colony Chrome Mounting Hardware KitFeatures rubber insulators to eliminate vibration.36024 Stove bolt-style with acorn nuts

for all slotted brackets . . . . . . . . . . . . . . . . . . . . . . . . .$5.99

72065 Flathead sockethead screws with countersunk washers and locknuts . . . . . . . . . . . . . .$9.99

72066 Buttonhead sockethead screws with flat washers and locknuts . . . . . . . . . . . . . . . . .$4.99

15954

36024

19885

Chrome License PlateBolt KitKit includes four buttonhead bolts,nylon-inserted lock nuts, washersand wrench. . . . . . . . . . . . . . . . .$6.2919768 Complete kit

License Plate ReflectorsThey measure 3/4" across the face and are idealfor mounting license plates. A 5/8"-long studwith a tension spring and wing nut holds theplate firmly in place.19778 Blue (display tub of 150) . . . . . . . . .$63.24

19780 Blue (display tub of 40) . . . . . . . . . .$16.89

19779 Red (display tub of 150) . . . . . . . . . .$63.24

19781 Red (display tub of 40) . . . . . . . . . . .$16.89

Inspection Tag BracketProvides a place to display inspec-tion tags required by many statesincluding Virginia. Attaches underthe front axle nut. . . . . . . . . .$17.9920310 Fits most models

Custom Mini License Plate LightsCNC-machined from aluminumwith plain or grooved caps. Idealfor side-mounted license platebrackets or for bikes with limitedspace. These units won’t rust andresist vibration due to the high-strength material. Includes a bulb,wire and mounting hardware. Sold each.85023 Plain . . . . . . . . . . . . . .$38.39

85159 Grooved . . . . . . . . . .$42.09

85023

85159

‘Fluid Stepped’ License Frames with L.E.D.’s by Paul Yaffe Originals• Designed with sharp pointed

corners along with a ‘fluidstepped’ pattern, giving theultimate custom touch

• Made of CNC-machined billetaluminum and chrome-plated

• Features a strip of whiteL.E.D.’s for both horizontal andvertical plates

• Both plates measure 7" x 4"• Fits motorcycle license plates

measuring 7" x 4" • Sold each600024 Vertical plate with 3" L.E.D. strip . . . . . . . . . . . . .$229.99

600025 Horizontal plate with 6" L.E.D. strip . . . . . . . . . .$243.89

Billet Aluminum ‘Documate’This handy unit mounts on the back of yourlicense plate bracket to hold registration, insur-ance forms, and any other important documentsyou need while on the road. Includes knurledend caps with water resistant O-rings. Availablein laydown or upright styles. . . . . . . . . . . . . .$61.4919495 Fits ‘Upright’ license brackets19496 Fits ‘Laydown’ license brackets

19495

19496


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.43

License Plate Kits & Brackets w/Lights

Ness-Tech® Light/License Plate KitChrome-plated backing plate is machined from billet alu-minum to accept most custom taillights. The 30° bend permitsinstallation onto almost all custom rear fenders.84377 Includes a rubber mounting block $173.99

Taillight Brackets for Fat Bob FendersAccurate reproductions of the Original Equip-ment brackets fitted to Softail® and 4-speedFXWG models with Fat Bob fenders from 1980to present. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.8426494 Chrome (replaces OEM 59993-80TA)

License Plate Frame With Marker LightsChrome license plate frame is made of precision die-cast alu-minum and features integrated vertical marker lights. Amberlenses with single filament 12 volt bulbs can be wired asmarker lights or turn signals. . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99240176 Sold each

340470

Taillight/License Plate Side Mount KitsUniversal style brackets available for side mount.The kit works for either right or left side mount-ing. Works with Lucas or universal style taillight.340470 Bracket kit with Lucas style light . .$42.99

340341 Bracket kit ONLY . . . . . . . . . . . . . . . . .$29.99

Side Mount TaillightUniversal side mount bracketmade in the USA by NationalCycle. Each kit includes a DOTapproved 12-volt taillight. . .$53.9919888 Complete kit

Chrome Pro-Fat License Bracketby Pro-OneMade of chrome-plated steel, this extra-wideplate holder fits 81/2" and 9" Fat Bob fenders.Has mounting points for CC #65474 custom Fat Bob taillight. . . . . . . . . . . . . . . . . . . . . . . . .$109.9965428 For 81/2"-wide fenders65424 For 9"-wide fenders

Donnie Smith Signature Series TaillightsDesigned exclusively for Custom Chrome by Hall of Fame bikebuilder - Donnie Smith, this side-mount taillight has a uniqueeyebrow shaped lens and concealed license plate retainer sys-tem. The high-output, high-intensity LED design consumesless power, lasts longer and outperforms most conventionalbulbs. Chrome billet construction. Available in vertical or horizontal versions. Fits left side on Softail® models from 1987 thru 1999. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$349.99240212 Horizontal240213 Vertical

240213 240212

License Plate IlluminationSmall chrome billet light mountsto upper belt guard tab to illuminate the license plate mount. . . . . . . . . . . . . . . .$72.9928376 Fits Softail® models 1984 to

present or custom mount

28376

LED License Plate withClear LensChrome plated die cast aluminumframe features brilliant red LEDstop/tail light with a clear lens,designed to have a white lookwhen not in use. Also featureslicense plate illumination. Not DOTapproved. . . . . . . . . . . . . . . . . . . .$65.99240095 Sold each

Lig

htin

g

5.44

5


License Plate Mounts & Accessories

Chrome ‘Laydown’ License Plate MountsClose-fitting, one-piece chrome-plated license plate mounts which can be used to replace the multi-piece license plate mount and bracket on the rear fender. Two rubber spacers isolate the license platefrom vibration, and permit the mount to be tailored to the profile of the fender for a much tighter,cleaner look. They mount directly to the standard hole pattern on all rear fenders (except Fat Bob)from 1955 to present and come complete with mounting hardware.13199 Original-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.49

14199 Pyramid-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$38.99

Replacement Spacers13299 Set of replacement rubber isolation spacers. One each flat and wedge style . . . . . . . . . . . . .$6.49

14199

13199

Chrome Cover for Rubber LicensePlate Frame WedgeCovers the rubber mounting wedge on one ofCustom Chrome’s all-time favorite accessories –the adjustable ‘Laydown’ license plates.Available in rounded or more square-corneredversions to fit either version of the rubbermounting block.14200 Rounded-corner cover . . . . . . . . . . . .$9.19

14201 Square-corner cover . . . . . . . . . . . . . .$9.49

Curved Chrome ‘Laydown’ License Plate MountCurvaceous cousin to our popular CC #13199, the original laydown license mount. Not only can thismount be angled to the profile of the fender, it also follows the radius, for a tighter, cleaner look. Fits most models Includes hardware and rubber isolation spacers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.9914205 Curved ‘laydown’ license plate bracket

Chrome License BracketChrome reproductions of the license platebrackets for most models from 1955 to present. Available in both two or three hole versions. . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.4919773 Replaces OEM 59995-55 (early 2-hole)19770 Replaces OEM 59983-75 (late 3-hole)

Chrome LouveredLicense Backing PlateFor license plates that measure 7" x 4" withplate hole dimensions measuring 53/4" x 23/4".The ideal companion to our louvered coil coversand battery covers. . . . . . . . . . . . . . . . . . . . .$12.4919889 Replaces OEM 59899-88T

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.45

License Plate Mounts & Accessories


Ness-Tech® ‘Radius’ License Frame and MountsThe master’s touch is evident in this simple yet elegant design. Chrome-plated billet frame works with most backing plates. To complete the look, add one ofthe chrome billet backing plates with mounting block. The backing plate with light mount is angled for better light visibility.

05773

05774

05774

05775

Arlen Ness® ‘Alternative’ License Plate AccessoriesChrome plated. die-cast construction with anattractive price. Features hidden mounting hardware and may be used individually or withcustom laydown backing plate. Radius designblends the license frame and backing platetogether as one unit. Laydown backing platesmount directly to all Original Equipment fendersfrom 1973 to present (except Fat Bob fenders).Mounting hardware is included.05425 Stepped license frame . . . . . . . . . .$46.35

05426 Stepped backing plate . . . . . . . . . .$52.20

05427 Grooved license frame . . . . . . . . . .$46.35

05428 Grooved backing plate . . . . . . . . .$52.20 05427 05426

05773 License frame for small plates used in most states . . . . . . . . . . . .$49.95

05774 Backing plate without light mount . . . . . . . . . . . . . . . . . . . . . . . . . .$89.95

05775 Backing plate with angled mount for Cateye taillight . . . . . . .$109.95

Lig

htin

g

5.46

Turn Signals

5


LED Conversion Turn Signal Lamp Assemblies by AdjureDon’t get burned up by burned out bulbs! TheseDOT approved LED lamps last up to 8 timeslonger than conventional bulbs, burn cool anddraw only a fraction as much energy from thecharging system. They’re available in single ele-ment versions for use as turn signals only, ordual element for use as a running lamp and turnsignal. Fit the flat turn signal housings on mostFLT, FLHT, FLHS, Road King® and FL Softail® mod-els from 1986 to present. Sold in pairs. . .$159.9961222 Amber turn signal330535 Red turn signal/running lampNote: These assemblies require the additional purchase andinstallation of a “load equalizer” for proper operation.

Late ‘Touring’ Model Turn Signal AssembliesSingle and dual filament 12-volt turn signal units for most models from 1986 to present.19114 Dual filament assembly (repl. OEM 68400-86) . . . .$22.99

19115 Single filament assembly (repl. OEM 68402-86) . .$22.99

Replacement Parts26124 Amber lens (repl. OEM 68440-86) sold each . . . . . . .$1.64

15123 Amber lens with blue dot (sold in pairs) . . . . . . . . .$16.99

26126 Red lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.09

12969 Red lens with blue dot (sold in pairs) . . . . . . . . . . . .$19.99

12522 Dual filament bulb (box of 10) repl. OEM 68168-89 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.09 ea.

12547 Single filament bulb (box of 10) repl. OEM 68572-64B . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.47 ea.

15150 Lens O-rings (repl. OEM 68451-86) pack of 10 . . . . .$4.99

19114

19115

Front Turn Signal AssembliesDual filament turn signal units for most modelsfrom 1986 thru 2001. May also be used on therear of the motorcycle for increased visibility. Sold each.26143 Amber lamp unit without threads

(repl. OEM 68404-86) . . . . . . . . . . . . . .$12.24

26144 Amber lamp unit with threads (repl. OEM 68406-86) . . . . . . . . . . . . . .$12.24

26635 Red lamp unit with threads . . . . . . . .$12.69

Rear Turn Signal AssembliesSingle filament turn signal units for most modelsfrom 1986 thru 2001. All four versions are thesame with threads in the body, but some have an additional hole to route the turn signal wirethrough. Sold each.19590 Amber lamp unit with wiring hole

(repl. OEM 68407-86) . . . . . . . . . . . . . .$12.24

19591 Red lamp unit with wiring hole . . . .$12.69

19592 Amber lamp unit w/o wiring hole (repl. OEM 68410-87B) . . . . . . . . . . . .$12.24

19593 Red lamp unit w/o wiring hole . . . . .$12.69

Late Model Turn Signal AssembliesReplace damaged Original Equipment turn signals or quickly change over from amber to red lenseswith these top-quality replacement parts.

Replacement Parts12522 Dual filament bulbs (repl. OEM 68168-89) box of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.09 ea.

12547 Single filament bulbs (repl. OEM 68572-64B) box of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.47 ea.

15126 Lens O-rings (repl. OEM 68455-86) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.29

26131 Amber lens ONLY (repl. OEM 68457-86) sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.64

26132 Red lens ONLY (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.89

22221 Amber lens with blue dot (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.89

22967 Red lens with blue dot (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.89


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.47

Turn Signals & Kits

Early Model Turn Signal AssembliesSingle filament replacement turn signal units for FX, FXR and Sportster®

models from 1973 thru 1985.26154 Amber lamp unit with threads (repl. OEM 68514-73) . . . . . . .$12.94

26122 Amber lamp unit without threads (repl. OEM 68515-77A) . .$11.84

26155 Amber lens ONLY (sold each) repl. OEM 68483-73 . . . . . . . . . . .$1.49

26149 Red lens ONLY (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.64

12963 Red lens with blue dot (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . .$19.99

12547 Replacement bulb (box of 10) repl. OEM 68572-64B . . . . . . . . .$1.47 ea.

15160 Replacement gaskets (pack of 10) repl. OEM 68481-73 . . . . . .$10.94

26154

26149

Bullet-Style Turn Signal KitsThese are Original Equipment parts. These bullet lights are styled like thosefitted to Deuce™ models and add the perfect touch of style to your bike!Chrome reflector-optic signals include housing, lenses and supports. Kitsinclude four lights with mounts and required hardware.75750 Fits FX Softail® models from 2000 to present, Sportster®

models from 1990 thru 2003 and all Dyna Glide models from 1991 to present (replaces OEM 68005-99) . . . . . . . . . . . . .$233.99

75749 Fits all FX Softail® models from 1988 thru 1999 (replaces OEM 68007-99) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$206.99

75749

75750

Red Taillight and Turn Signal BulbsStandard BulbRed-coated light bulb is ideal for use with clear lenses.12-volt dual element bulb replaces 1157R. . . .$3.79 ea.15184 Box of 10

Super High-Intensity BulbThis red-coated light bulb is recommended for use withour clear lenses. The 12-volt dual element bulb is ratedat 50/14 candlepower instead of the standard 32/3 can-dlepower and replaces an 1157R. . . . . . . . . . . . .$5.99 ea.15141 Box of 10

Super BulbHigh intensity stop and taillight bulb has nearly 100% greater illumination.Long life and vibration resistance from triple-wound double filament. 12-volt. Replaces #’s 1034 and 1157.12530 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49

12531 Pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99

Note: May be unsuitable for installations with limited clearance with plastic lenses.

Early Model FL Turn Signal AssembliesDual filament 12-volt turn signal assemblies for most FL models from 1963 thru 1985. Sold each.19092 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.99

19093 Amber (repl. OEM 68557-70A) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.64

Replacement Parts15127 Red lens ONLY (sold each) repl. OEM 68570-63 . . . . . . . . . . . . . .$1.99

15128 Amber lens ONLY (sold each) repl. OEM 68571-63 . . . . . . . . . . .$4.99

19098 Dual filament bulbs (box of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.49 ea.

12964 Red lens with blue dot (sold in pairs) . . . . . . . . . . . . . . . . . . . . . .$15.49

19092

19093

Lig

htin

g

5.48

5


Turn Signals & Kits

1510715120

Complete Lens KitsInclude lenses, bulbs and flasher. . . . . . . . . .$22.991973-85 1986-01

15099 15100 Amber only15119 15120 Amber and red

Replacement LensesReplacement lenses (sold each) . . . . . . . . . . . .$4.991973-85 1986-01

15117 15115 Amber15118 15116 Red

Replacement Bulbs15114 Single filament (box of 10) . . . .$1.29 ea

12523 Dual filament (box of 10) . . . . .$1.54 ea

Replacement Flasher Unit25205 Sold each (repl. OEM 68541-64A) . .$4.99

Complete Lens Kits with Blue Dot LensesInclude lenses with Blue Dots, bulbs and flasherfor all models from 1986 thru 2001. . . . . . .$31.9415106 Amber only15107 Amber and red

Replacement LensesReplacement blue dot lens (sold in pairs) .$16.9915110 Amber15111 Red

Replacement Bulbs15114 Single filament (box of 10) . . . .$1.29 ea

12523 Dual filament (box of 10) . . . . .$1.54 ea

Replacement Flasher Unit25205 Sold each (repl. OEM 68541-64A) . .$4.99


Flat Lens Turn Signal Kit by Chris ProductsFeatures a completely re-designed chrome hous-ing that uses standard full-size turn signal bulbsinstead of the miniature bulbs found in otherflat lens kits. Fit most Harley-Davidson¨ modelsfrom 1986 thru 2001. . . . . . . . . . . . . . . . . . . . .$68.4919597 Complete kit with two single filament

and two dual filament lamp units

Replacement Parts19595 Single filament lamp unit

with threads (sold each) . . . . . . . . .$17.24

19596 Dual filament lamp unit with threads (sold each) . . . . . . . . .$17.24

15128 Amber lens ONLY (sold each) . . . . . .$4.99

15127 Red lens ONLY (sold each) . . . . . . . . .$1.99

‘Flat-Style’ Turn Signal Lens KitsStylish kits are easy to install and available with four amber lenses or two amber

and two red lenses. Complete with a heavy-duty flasher unit and special bulbs which are shorter over-all than stock to clear the lenses. Kits for models from 1986 thru 2001 include two dual filament bulbsfor the front to retain running lights. Fit all Sportster®, FX, FXR, Dyna Glide and Softail® models from1973 thru 2001 (except FXRD, FXRT, FLSTC and FLSTN).

2000-Up Signal Lights for Deuce™

Models by Chris ProductsDirect replacement turn signal light for theSoftail Deuce™ model (FXSTD). This sleek newdesign works with 1973 to present style mount-ing hardware and can be used on most motorcy-cles. Available for front or rear. Sold each.330787 Front. Dual filament with amber

lens (wires exit behind mounting hole) . . . . . . . . . . . . . . .$18.89

330788 Rear. Dual filament with amber lens (wires exit through mounting hole) . . . . . . . . . . . . . . .$18.89

Replacement LensesSold each.330776 Amber . . . . . . . . . . . . . . . . . . . . . . . .$2.39

330777 Red . . . . . . . . . . . . . . . . . . . . . . . . . .$1.34

330778 Clear . . . . . . . . . . . . . . . . . . . . . . . . .$3.89

330787

330778 330777

Complete Turn Signal KitsGreat kit for building bikes from the ground up. Includes all clamps and support hardware to mountturn signal housings to handlebars and fender struts. One kit features late-model (1986 thru 2001)housings and amber lenses with dual-filament bulbs for the front and rear. The other has early-model(1973 thru 1985) housings and amber lenses with single-filament bulbs. Both include a pair of red lenses as a bonus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$76.5426148 Kit with late lamp units and dual-filament bulbs (1986-up)26147 Kit with early lamp units and single-filament bulbs (1973-1985)

1603616040


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.49

Turn Signal Lenses & Caps

Clear Turn Signal LensesThese clear lenses change the look of the turnsignals completely. When used in conjunctionwith amber bulbs the turn signal looks orangewhen lit. Sold each.

Clear lens for Original Equipment turn signalunits on FL models from 1963 thru 1985 and CC #’s 19092 and 19093.15157 Replaces OEM 68571-63 . . . . . . . . . . .$5.49

Clear lens for Original Equipment turn signalunits on FLT, FLHT, FLHS and Road King® modelsfrom 1986 thru 2003 and CC #’s 19114,19115.15158 Replaces OEM 68440-86 . . . . . . . . . . .$5.49

Clear lens for all FXR, Sportster® and Dyna Glidemodels from 1986 thru 2001.15168 Replaces OEM 68457-86 . . . . . . . . . . .$4.34

15198 Single element amber bulb (1156NA) box of 10 . . . . . . . . . . .$1.99 ea

15199 Dual element amber bulb (1157NA) box of 10 . . . . . . . . . . .$0.78 ea

16017

16029

16024

16030

Bullet Turn SignalLenses by Motor City CycleReplace those boring lenses with these cool units. Clear lenses look great when used with clear, amber, or red bulbs.Front and rear chrome flames flowin the proper direction. Sold in pairs.

Chrome Front Turn Signal by Chris ProductsTurn signal features a clear lens includes adual filament amber bulb. Fits FLT, FLHT,FLHS and Road King® models from 1986 topresent (replaces OEM 68400-86). . . . . .$21.9919894 Sold each

Bullet Turn Signal Lenses for Deuce Signal Lights by Motor City CycleReplace your stock turn signal lenses with these stylish bullet lenses. Available with silver front-facingflames for both front and rear with a choice of either clear, red or amber lenses. Fits Deuce™ modelsfrom 2000 to present, and all models with snap-in lenses from 2002 to present. Sold in pairs.

Front Lenses ONLY with Flames16039 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.49

16040 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.49

Rear Lenses ONLY with Flames16036 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.49

16037 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.49

16038 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.49

Front or Rear Lenses without Flames16033 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99

16034 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99

16035 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99

Fit Original Equipment turn signal units on FLT,FLHT, FLHS and Road King® models from 1986 topresent, and CC turn signals #19114 and #19115.16013 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99

16029 Clear with flames, front only . . . . . . .$59.99

16030 Clear with flames, rear only . . . . . . .$59.99

16017 Amber with flames, front only . . .$59.99

16018 Amber with flames, rear only . . . . . . .$59.99

16024 Red with flames, rear only . . . . . . .$59.99

Fit Original Equipment turn signal units on FLmodels from 1963 thru 1985, and CC turn signals#19092 and 1909316014 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99

16031 Clear with flames, front only . . . . .$59.99

16032 Clear with flames, rear only . . . . . .$59.99


16020 Amber with flames, rear only . . . .$59.99


Fit Original Equipment turn signal units on mostSportster®, FXR, Dyna Glide and FX Softail® mod-els from 1986 thru 2001.16012 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99

16027 Clear with flames, front only . . . . .$59.99

16028 Clear with flames, rear only . . . . . .$59.99


16016 Amber with flames, rear only . . . .$59.99


Lig

htin

g

5.50

5


Turn Signal Accessories

‘Mirage®’ Turn Signal Grills with Lenses• Chrome-plated die-cast zinc grills• Decorative black painted slots• Special flat lenses to enhance styling• Includes new chrome mounting screws• Matches over 22 other ‘Mirage®’ items• Fit the front of 1988 to present FLTCs and the rear of all

FLTC, FLHT, FLHTC, FLHS, Road King®, FLST, FLSTC, FLSTN,FXRD and FXRT models 1986 to present.

27126 Mirage grills with amber lenses (sold in pairs) . . .$34.39


27127 Replacement red lenses (sold in pairs) . . . . . . . . . .$6.99

27128 Replacement amber lenses (sold in pairs) . . . . . . .$6.99

27129 Replacement clear lenses (sold in pairs) . . . . . . . . .$5.99

TM

TM

09709

09707

‘Slotted’ Turn Signal Trim RingsChrome-plated stamped steel and include chrome mounting hardware. Sold in pairs.

For Flat-Style LensesAvailable for the early and late model flat lenses fitted to the turn signal assemblies on most ‘Touring’ models from 1963 to present. . . . . . . . . . . . . . . . . . . . . . .$18.4909707 Late-style for 1986 to present models

For FX-Style LensesEasy to install. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.9909709 Late-style for models from 1986 thru 2001Note: Installation of these accessories may be in violation of FMVSS Standard #108.

Mirage® Turn Signal GrillsNow even the latest models can enjoy Mirage® turn signalgrills. Our adjustable mounting reflector permits the slots tobe either vertical or horizontal. Easy-to install, and mount inminutes on all Softail® (except FLSTC), FXR, Dyna Glide andSportster® models from 1986 thru 2001. Sold in pairs.27107 Amber lens with dual filament bulb

for front turn signals . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99

27108 Red lens with single filament bulb for rear turn signals . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99

27109 Amber lens with single filament bulb for rear turn signals . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99

92141 Replacement red lenses (pair) . . . . . . . . . . . . . . . . . . .$9.49

92142 Replacement amber lenses (pair) . . . . . . . . . . . . . . . .$9.49



Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.51

Turn Signal Brackets

Shortened styles are four inches

narrower than Original Equipment!

Rear Turn Signal Mounting BarsAvailable in shortened and stock lengths. Select the shortened bars to giveyour bike a cleaner look by moving the turn signals closer to the bike, orchoose the stock length to maintain the factory look. Economical die-castversions are available chromed or polished. Steel bars are chrome-platedand designed to be much more resistant to breakage than the die-cast part.

Fits 4-speed FL Models from 1974 thru 1984, FL Softail® Models from 1986 to Present and FLT, FLHT, FLHS and Road King®

models from 1991 to PresentShortened Stock Length

19249 19246 Die-cast chrome (repl. OEM 68510-74B) . . . . . .$32.99

12254 n/a Steel chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$61.51

Fits all FLT, FLHT and FLHS models 1985 thru 1990 or FXRT andFXRD models 1983 thru 1992Shortened Stock Length

12258 12256 Steel chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.49

Note: Installation of shortened turn signal bars may be in violation of FMVSS Standard #108.

ShortenedShortened

StockStock

19246

19249

1225612258

Doss Turn Signal Bracket FillerFills in the opening, hides the wiring, and givesyour turn signals a clean look. These chrome-plated steel covers, designed by Rick Doss,install in minutes. Fits rear turn signal bracket(OEM 68510-74B) on FL Softail® models from1990 to present, and FLT, FLHT, FLHS and RoadKing® models from 1991 to present. . . . .$34.4919257 Sold in pairs

After

Before

Short Rear Turn Signal BracketsTired of kicking your turn sig-nals ever time you swing a legover? These brackets look likethe stock factory items, but areless than half the length, andare perfect for getting thoserear turn signals in tight to thebike where they belong. Fits Sportster®, FX Softail® and4-speed FX models from 1973 to present. . . . . . . . .$21.3919353 Sold in pairs

Lig

htin

g

5.52

5



Chrome Turn Signal Mounting BracketEverything necessary for installing turn signals on the front of 4- or 5-speed FL models from 1968 thru 1992. The universalmounting clamp permits installation on a variety of motorcycles.19239 Kit – includes one of CC #’s 19237 and 19238

(repl. OEM 68518-68) . . . . . . . . . . . . . . . . . . . . . . . . . .$11.59

19237 Standoff ONLY (repl. OEM 68519-68) sold each . .$4.00

19238 Clamp ONLY (repl. OEM 68795-68) sold each . . . .$5.39

19237

19238

Turn Signal Relocation Brackets for Springer Softail® ModelsChrome steel brackets provide an alternative mount for stock or custom turn signals ormarker lights. Sold in pairs with hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.4913257 Fits all Springer Softail® models from late 1988 to present (lights not included)

Light Mounting BracketStrong, chrome-plated accessory lamp mounting bracket for bullet marker lights and/or mini lamps. Easily mounts to license plate mounting holes. . . . . . . . . . . .$6.0919096 Mounting bar

Relocation Clamp KitsPerfectly suited for use in relocating Original Equipment turn signals from your handle-bars or triple trees to your front forks. They come complete with all necessary hardwareand bolt-on in minutes. Sold in pairs.09148 Clamps for 39mm forks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99

09149 Clamps for 41mm forks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43.59

09149

Doss Marker Light Mirror Mounts09152 Sold in pairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.49

Adjure Marker Light Mounts for Softail®

and ‘Touring’ ModelsThese mounts will permit you to install ‘Beacon’ marker lightsto the front or rear turn signal mounting bars on most FLSoftail® and ‘Touring’ models from 1968 to present. Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.95634052 For ‘Beacon 1’ marker lights634053 For ‘Beacon 2’ marker lights


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.53


Custom Turn Signal Mounts for 39mm ForksChrome die-cast mounts move triple tree-mounted turn signals closer in to the centerlineof the motorcycle. They clear stock gas tanks when properly indexed. They may be fittedto models with 39mm forks which have turn signals hanging from the mirror stems. For1987 thru 2001 Sportster® and FXR models and 1991 thru 1995 Dyna Glide models with39mm forks with turn signals mounted on the top triple tree. . . . . . . . . . . . . . . . . . . . . .$22.9927990 Sold in pairs

Lowered Turn Signal KitThis custom lowered turn signal kit relocates the turn signalsfrom the fender struts to a new, lower position, which provides more clearance for installing saddlebags and gives a cleaner look. The chrome turn signal mounting bar isthreaded to accept stock type turn signals, and fastens easilyusing the license plate bracket mounting holes. Kit includeschrome turn signal bar, wiring, and hardware. Turn signalssold separately. Fits FX, XL, and FXR models 1973 to present. 380220 Replaces OEM 68512-89 . . . . . . . . . . . . . . . . . . . . . . .$34.99

Turn Signal Relocation Kit for Dyna Wide Glide® ModelsChrome kit relocates the rear turn signals further out whichallow for saddlebags. Required when installing saddlebagsupport kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49380202 Fits Dyna Wide Glide® models from 1993 to present

Turn Signal Relocation Kit for Softail® ModelsRelocates the rear turn signals further back to allow for saddlebags. Fits FX Softail® and 4-speed FXWG models from1984 to present. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49330629 Replaces OEM 68548-87

Chrome Turn Signal BracketFits many Harley® models from 1973 to present. . . . . . . .$14.49330651 Replaces OEM 68555-87

1924019242

19244

19245

1924119236

Chris Products Turn Signal MountsA wide selection of chrome turn signal mounting components to fit most models from 1973 to present. Sold each.19240 Clamp with screws (repl. OEMs 68487-82, 68486-82A) . . . . . . . . . . . . . . . . . . . . . . .$6.19

19241 Rear support with screw (repl. OEM 68480-73) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.69

19236 Rear support for Sportster® models from 1994 thru 2003(repl. OEM 68480-94) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.14

19230 Threaded rod for CC #19236 support (not shown) . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.99

19242 Bracket between signal and bar clamp (repl. OEM 68477-73) . . . . . . . . . . . . . . . .$4.99

19244 Rear turn signal threaded stud (repl. OEM 68493-87) . . . . . . . . . . . . . . . . . . . . . . . .$4.34

19245 Same as CC #19244 but moves signals 1/2" closer to bike . . . . . . . . . . . . . . . . . . . .$9.34

Lig

htin

g

5.54

Bullet-Style Marker Lights

5


Halogen Lights (sold in pairs)The clear units are 50 watts, the red units are 35 watts, and the amber units are 20 watts.

Amber Red ClearSmooth 634027 634028 634029Housing $113.00 $113.00 $113.00

Flamed 634030 634031 634032Housing $125.00 $125.00 $125.00

LED Lights (sold in pairs)These units have 19 LEDs to provide light andwill run cooler than their halogen counterparts.The 2-wire lights may be used as turn signals,and the 3-wire lights will provide running andturn signal/brake lights.

Amber Amber Red Red2-Wire 3-Wire 2-Wire 3-Wire

Smooth 634025 634026 634023 634024Housing $206.00 $206.00 $206.00 $206.00

Flamed 634021 634022 634019 634020Housing $217.00 $217.00 $217.00 $217.00

Marker Light Mount for Softail®

and ‘Touring’ ModelsPermits you to install ‘Beacon 1’ marker lights to the front or rear turn signal mounting bars onmost FL Softail® and ‘Touring’ models from 1968to present.634052 Sold in pairs . . . . . . . . . . . . . . . . . . . .$31.95

Replacement LED PC BoardsSold each.634015 Amber 2-wire . . . . . . . . . . . . . . . . . . .$40.00

634016 Amber 3-wire . . . . . . . . . . . . . . . . . . .$40.00

634017 Red 2-wire . . . . . . . . . . . . . . . . . . . . . .$40.00

634018 Red 3 wire . . . . . . . . . . . . . . . . . . . . . . .$40.00

Replacement Parts330545 Clear lens (sold in pairs) . . . . . . . . . .$13.99

330546 Red lens (sold in pairs) . . . . . . . . . . .$13.99

330547 Amber lens (sold in pairs) . . . . . . . .$13.99

330732 20-watt amber bulb (sold each) . .$13.99

634069 35-watt red bulb (sold each) . . . . .$14.00

634070 50-watt clear bulb (sold each) . . . .$14.00

634052

Flush mount

Halogen LED

Adjure ‘Beacon 1’ Marker LightsEnhance the looks of your ride with these chrome bullet-style marker lights. The flush mount designhas a 5/16"-24 threaded hole in the body for custom applications, and they measure 13/8" in diameterand are 27/8"-long. They are available with your choice of MR-11 halogen bulb or LED light sources,that may be purchased with clear, amber or red lenses. Chrome housing choices are smooth or flamed.The LED marker lights require the installation of a ‘load equalizer’ for proper operation. Includes 1/2"chrome standoff, nylon flat washer and 11/4" hollow stainless steel bolt.Note: Designed as supplemental lighting ONLY, and should not be used to replace Original Equipment running lights or turn signals.

Adjure ‘Beacon 2’ Marker LightsThe Beacon 2 is a larger version of the Beacon 1,measuring 21/4" in diameter. The flush mountdesign has a 5/16"-24 threaded hole in the bodyfor custom applications. They come with yourchoice of MR-16 halogen bulb or LED lightsources, that may be purchased with clear,amber or red lenses, and the chrome housingsare available with smooth or flamed finishes.Please note that the LED marker lights requirethe installation of a ‘load equalizer’ for properoperation. Includes 1/2" chrome standoff, nylonflat washer and 11/4" hollow stainless steel bolt.Note: Designed as supplemental lighting ONLY, and shouldnot be used to replace Original Equipment running lights or turn signals.

Halogen Lights (sold in pairs)The clear units are 50 watts, the red units are 35 watts, and the amber units are 20 watts.

Amber Red ClearSmooth 634036 634035 634034Housing $113.00 $113.00 $113.00

Flamed 634039 634038 634037Housing $125.00 $125.00 $125.00

LED Lights (sold in pairs)These units have 40 LEDs to provide light andwill run cooler than their halogen counterparts.The 2-wire lights may be used as turn signals,and the 3-wire lights will provide running andturn signal/brake lights.

Amber Amber Red Red2-Wire 3-Wire 2-Wire 3-Wire

Smooth 634040 634041 634042 634043Housing $206.00 $206.00 $206.00 $206.00

Flamed 634046 634047 634044 634045Housing $217.00 $217.00 $217.00 $217.00

Marker Light Mount for Softail®

and ‘Touring’ ModelsPermits you to install ‘Beacon 2’ marker lights to the front or rear turn signal mounting barson most FL Softail® and ‘Touring’ models from1968 to present.634053 Sold in pairs . . . . . . . . . . . . . . . . . . . .$31.95

Replacement LED PC Boards (sold each)634048 Amber 2-wire . . . . . . . . . . . . . . . . . . .$63.59

634049 Amber 3-wire . . . . . . . . . . . . . . . . . . .$63.59

634050 Red 2-wire . . . . . . . . . . . . . . . . . . . . . .$63.59

634051 Red 3-wire . . . . . . . . . . . . . . . . . . . . . .$63.59

Replacement Parts330236 Clear lens (sold in pairs) . . . . . . . . . .$14.99

330237 Red lens (sold in pairs) . . . . . . . . . . .$14.99

634033 Amber lens (sold in pairs) . . . . . . . .$14.90

634071 20-watt amber bulb (sold each) . .$14.00

330239 35-watt red bulb (sold each) . . . . .$13.99

330238 50-watt clear bulb (sold each) . . . .$13.99

Flush mount

634053

LED ‘Bullet’ Marker Lights by Paul Yaffe Originals®

High-intensity LED arrays in place of the traditional bulbs. Vibration resistant, long last-ing with chrome housings. Mounts with a 5/16"hollow hex bolt on most flat surfaces. . . . .$149.9947664 Sold in pairsNote: Designed as supplemental lighting ONLY, not toreplace Original Equipment running lights or turn signals.

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.55

Bullet-Style Marker Lights


Custom Bullet Marker LightsWith Visor (sold each)25293 Red (single filament bulb) . . . . . . . .$11.99

28004 Amber (single filament bulb) . . . . .$15.49

28001 Red (dual filament bulb) . . . . . . . . .$15.49

28003 Amber (dual filament bulb) . . . . . .$15.49

Without Visor (sold each)19355 Red (single filament bulb) . . . . . . . .$10.99

28002 Amber (single filament bulb) . . . . .$10.62

28000 Red (dual filament bulb) . . . . . . . . .$13.99

28005 Amber (dual filament bulb) . . . . . .$13.99

Note: Designed as supplemental lighting ONLY, not toreplace Original Equipment running lights or turn signals.

Replacement Bulbs12523 Dual filament (box of 10) . . . . .$1.54 ea.

27999 Single filament (box of 10) . . . .$1.09 ea.

28004 19355280058

280055

Bullet Lights with Mounting BracketThese chrome plated bullet lightsmount easily with a built-inmounting bracket. Includes singlefilament 12 volt, 8 watt bulb. Soldin pairs. . . . . . . . . . . . . . . . . . . . . .$21.49280055 Red280058 Amber

Bullet LightReplacement LensesGlass or plastic replacement lensesfor CC and Original Equipmentbullet lights (except winged styles).Sold each.27993 White glass

(not shown) . . . . . . . .$10.99

27996 Red glass (not shown) . . . . . . . . .$6.49

15129 Red plastic (not shown) . . . . . . . . .$2.49

15130 Amber plastic . . . . . .$2.49

Custom and ‘Mini’ Bullet LightsThese 2"-diameter dual filament bullet lights are 20% smallerthan standard bullet lights for a clean custom look. Chrome-plated steel with threaded stem for easy mounting. Sold each.

‘Mini’ Bullet Lights230321 Amber with 2"-long stem . . . . . . . . . . . . . . . . . . . . . .$15.49

Custom Bullet Lights230341 Amber with 2"-long stem . . . . . . . . . . . . . . . . . . . . . .$15.49

Replacement Parts230266 Blue lens for Mini bullet lights . . . . . . . . . . . . . . . . . . .$1.84

230267 Amber lens for custom bullet lights . . . . . . . . . . . . . .$1.84

230268 Red lens for custom bullet lights . . . . . . . . . . . . . . . . .$1.84

230269 Blue lens for custom bullet lights . . . . . . . . . . . . . . . . .$1.84

230262 230253

Custom Bullet LightsFeatures extended mounting stud for easy installation.Available with single or dual filament. 12 volt, 8 watt bulbincluded. Sold each.

Single Dual Lens Color

230262 n/a Amber$9.84

230253 230263 Red$9.84 $9.84

Bullet Lights with BracketsClassic styling, built-in chrome mounting bracketand single filament bulb for left or right-sidemount. Sold each.27997 Bullet light with right mount . . .$13.99

27998 Bullet light with left mount . . . .$13.99

27999 Replacement bulb (box of 10) . . .$1.09 ea.

27998

27997

Bullet Marker Lights by Pro-One™

Die cast marker lights are polished smooth then given a showchrome finish. Single filament bulbs and amber lenses with3/8" mounting holes. Optional colored lens kits are also available. Sold in pairs.65477 Smooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.95

65478 Ball Milled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.95

65475 Red lens kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.95

65477

65478

15130

Lig

htin

g

5.56

5


Marker Lights

KüryAkyn™ Small Silver Bullet LightsCustomize your ride with these small Silver Bullet lights from KüryAkyn™.Complete with wiring and hardware. Sold in pairs.330735 Universal 3/8" stud mount. 20 watt. Red, amber

and clear lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$91.84

330736 Handlebar control mount. 20 watt. Red, amber and clear lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.99

330737 Fork mount. 20 watt. Clear and amber lenses . . . . . . . . . . . . . . . .$99.99

Note: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.

330735

Mini Stretch Bullet LightsThese bullet lights are perfect for additional lighting on your raked outscooter. The sleek bullet shape combines function and style to give it thatadded custom touch. 11/4" x 3" Sold each.230360 Slotted with amber lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99

230361 Slotted with red lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99

230362 Smooth with amber lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99

230363 Smooth with red lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99

Replacement Lens230358 Amber lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.99

230359 Red lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.99


230360

230361

Ness-Tech® ‘Alternative’ 2" Speeding Bullet Marker LightsChrome-plated die-cast 2"-diameterconed design. Available in smooth orgrooved versions with single or dualfilament bulbs. Include amber andred lenses. Sold each. . . . . . . . . .$29.95

Mini Marker Lights with ClampsCustom single filament marker lights. Available in red or amber. Measures13/4"-wide, 11/8"-tall and 15/8"-deep. With 5/16 thread mounting studs. Sold each as kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99

Red Amber Clamp Size78088 78087 1/2"78090 78089 5/8"78091 n/a 3/4"Note: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.

Smooth Grooved04912 04914 Single filament04913 04915 Dual filament

Replacement Bulbs648313 Single filament bulb (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.95

648331 Dual filament bulb (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.95


‘Magnum’ Chrome Bullet Marker Lights12 volt dual-bulb lights mount tomost flat surfaces with a 5/16" hollow bolt. Includes red andamber lenses.28025 Marker lights

(sold in pairs) . . . . .$70.89

28024 Replacement amber lens (sold each) . . . . .$3.09

28017 Replacement red lens (sold each) . . . .$3.09

For the Dealer Nearest You, Call: 800-729-3332 5.57

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

AutoGem Baby Bullet Lights• Measure 11/8"-diameter x 21/4" from tip-to-tip• Uses 1"-long x 5/16"-18 mounting stud• 1"-diameter glass lenses are held in position

with a spring and O-ring retention system• Comes with amber lenses, optional red and blue lenses are available• Use 12-volt single filament wedge base bulbs• Sold in pairs

27317 Baby bullets with amber lenses . . . . . . . . . . . . . . . . . . . . .$69.99

240275 Baby Bullets with blue lenses . . . . . . . . . . . . . . . .$69.99

240273 Baby Bullets with red lenses . . . . . . . . . . . . . . . . .$69.99

27318 Optional amber lenses . . . . .$14.99

27316 Optional blue lenses . . . . . . .$14.99

27319 Optional red lenses . . . . . . . .$14.99

Replacement Bulbs09134 .33 amps (box of 10) . . . . $1.28 ea.

12551 .35 amps (box of 10) . . . . $1.09 ea.

12552 .19 amps (box of 10) . . . .$1.09 ea.Note: Designed as supplemental lighting ONLY, not to replace Original Equipment running lights or turn signals.

U.S. Patent #4,420,803

U.S. Design Patent #276,468

31581

31582

31547

31556

Baron® Marker LightsChrome-plated 12-volt marker lights feature precision die-castone-piece housings. The Mini lights measure 13/4"-tall x113/16"-wide and are 21/4"-deep, while the Baron® Markerlights measure 21/8"-tall x 23/8"-wide and 21/2"-deep. Chrome-plated, injection-molded grill kits are sold separately and include new screws.Note: Designed as supplemental lighting ONLY, not to replace OriginalEquipment running lights or turn signals.

Baron® Mini Marker LightsWith single filament bulbs.31580 Amber (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.74

31581 Red (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.64

31556 Lens grill kit (pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.49

Baron® Marker LightsWith single filament bulbs.31582 Amber (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.79

31583 Red (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.24

31547 Lens grill kit (sold each) . . . . . . . . . . . . . . . . . . . . . . . .$7.99

Baron® Marker LightsWith dual filament bulbs.31585 Amber (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.24

31584 Red (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.24

31547 Lens grill kit (sold each) . . . . . . . . . . . . . . . . . . . . . . . .$7.99

Replacement Parts12551 Single filament bulb (#168) pack of 10 . . . . . . . .$1.09 ea.

31590 Dual filament bulb (pack of 10) . . . . . . . . . . . . . . .$1.24 ea.

31586 Amber lens for Baron® Mini light (sold each) . . . .$3.14

31587 Red lens for Baron® Mini light (sold each) . . . . . . .$3.14

Diamond Marker LightsOne-piece, chrome-plated die-cast housings with pedestal bases and a unique diamondshape. 12-volt, 4-watt single-filament bulbs. Measure 11/4"-high x 17/8"-wide. Sold each.27500 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.39

27501 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.39

Note: Designed as supplemental lighting ONLY, not to replace Original Equipment running lights or turn signals.

Replacement Parts27510 Red lens ONLY (pack of 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49

27511 Amber lens ONLY (pack of 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49

09134 Bulbs (box of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.28 ea.

LED Micro Marker Light with Amber LensDie-cast construction with polished chrome finish.230299 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99

230261 Amber replacement lens (sold each) . . . . . . . . . . . .$2.99

Note: Designed as supplemental lighting ONLY, not to replace OriginalEquipment running lights or turn signals.

AutoGem ShotGun LightsThe chrome light housing is incorporat-ed with the rear fender and saddle bagmounting support. This system is design-ed to replace the Original Equipmentbracket (OEMs 53422-97, 47440-92),when using the laydown license bracket(CC #’s 15668, 15669). Lights have realglass lenses and stainless steel bezels.Made in the USA to fit all Touring mod-els from 1993 to present. . . . . . . . .$54.9527309 Sold in pairsNote: Designed as supplemental lighting ONLY, not to replace Original Equipment running lightsor turn signals.

Marker Lights

Lig

htin

g

5.58

5


Marker Lights

‘Ergo’ Mini Marker LightsOur "Ergo" die-cast marker lights feature smooth contoured styling with brilliant chrome and amber lenses. They have 5/16" mounting holes to fitmost front forks, and hardware is included. Sold in pairs. . . . . . . . . . . . . .$62.99330813 Dual filament lightsNote: Marker lights intended for supplemental lighting only and not designed to replaceOriginal Equipment running lights or turn signals.

Ness-Tech® LED Mini Marker Lights for 1" and 11/4" BarsClean design mounts directly to handlebars. Includes super brightamber LED bulbs and chrome-platedradius billet housings. Requiresdrilling and tapping of handlebartube. Sold in pairs. . . . . . . . . .$149.9504900 Fits 1" bars04901 Fits 11/4" barsNote: Designed as supplemental lighting ONLY,and should not be used to replace OriginalEquipment running lights or turn signals.

Ness-Tech® Universal Mini Marker LightsChrome LED lights are used as front or rear applications. CNC machinedfrom 6061-T6 billet aluminum. Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . .$129.9504904 Red lens04905 Amber lensNote: Designed as supplemental lighting ONLY, and should not be used to replace OriginalEquipment running lights or turn signals.

Ness-Tech® LED Mini Marker for Front and Rear Light BarsSleek billet design replaces factory turn signals on all FL front and rear factory light bars. Bright LED bulbs provide excellent visibility. Amber unitscan be used on front or rear applications; red units can be used on rearonly. Dual filament provides additional lighting possibilities. Chrome-platedunits are sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.9504906 Amber marker lights04907 Red marker lightsNote: Designed as supplemental lighting ONLY, and should not be used to replace OriginalEquipment running lights or turn signals.

Doss Square Mini Marker LightsSmall marker lights are almostinvisible mounted below thelower triple tree or other custom installation. Includes redand amber lenses. . . . . . . .$44.9946380 Sold in pairs


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.59

Doss Marker Lights

Doss Round Marker LightsModern design has dual filament bulbs andunique smooth mounting with a recessed areafor a caliper insert. Includes red and amber lens-es, mounting hardware and our standard caliperinserts. You can upgrade these marker lightswith any 1.80" caliper insert available in themarket today. Sold in pairs.46401 Front lights and mirror mount kit

for the stem on all models from 1972 to present . . . . . . . . . . . . . . . . .$62.99

46403 Front lights for 5/16" mounting hole formost front forks (39mm forks require CC #27990 signal mounts) . . . . . . . .$59.99

46404 Front lights and mounting kit for models with 41mm fork tubes . . . .$76.99

46405 Front lights and mounting kit for models with 39mm fork tubes . . . .$76.99

98234 Replacement bulbs (pack of 10) . . . . . . . . . . . . . . . . . .$1.09 ea.

46401

46403

46404

62053

Doss ‘Teardrop’ Marker LightsThe dual bulbs and distinctive shape of theseRick Doss-designed marker lights make themideal for specialized lighting requirements. Easy-to-install applications for all models from1972 to present. Sold in pairs.62053 Front lights and mirror mount kit

for the stem on all models from 1972 to present . . . . . . . . . . . . . . . . .$64.99

62068 Front lights and mounting clamps for models with 41mm forks . . . . .$76.99

62072 Front lights with 5/16" mounting holesfor most front forks . . . . . . . . . . . . . .$65.99

62072

Doss Custom Marker LightsChrome-plated die-cast construction. 23/4"-long,1"-wide x 11/8"-deep with single or twin single-filament bulbs. Lights with 3/8" mounting holesinclude hardware to mount to fender struts.Lights with 5/16" mounting holes fit most frontforks with the supplied hardware. Sold in pairs.

3/8" Mounting Holes with Red Lenses09126 Single bulb light . . . . . . . . . . . . . . . .$44.69

09129 Twin bulb light . . . . . . . . . . . . . . . . . .$46.29

5/16" Mounting Holes with Amber Lenses09127 Single bulb light . . . . . . . . . . . . . . . .$41.59

09130 Twin bulb light . . . . . . . . . . . . . . . . . .$43.19

Replacement Parts09123 Red lens (sold each) . . . . . . . . . . . . . .$4.49

09128 Amber lens (sold each) . . . . . . . . . . .$4.49

09134 Single filament bulbs (box of 10) . . . . . . . . . . . . . . . . . .$1.28 ea.

Note: Designed as supplemental lighting only, not to replaceOriginal Equipment running lights or turn signals.

Mirror Mount Side Light Mini MarkersRectangular mini marker lights come with side illumination for increased visibility and a custom look. Mounts to the base of the mirror with threaded adapter. Sold in pairs.330755 Kit with twin bulb lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$51.99


Lig

htin

g

5.60

Mirror/Fork Marker Lights

5


Doss Chrome Billet Side-Mount Marker Light KitsAnother stylish product from master customizer, Rick Doss, and a great wayto clean up the front end of your bike. They’re made from chrome-platedbillet aluminum and feature front and rear amber lenses and twin bulbs inthe housing to maximize visibility. A variety of kits are available to fit manymodels including all FL Softail® models with Original Equipment ‘tins,’ aswell as some our most popular aluminum housing headlight kits.46166 Fits all FL Softail® models from 1986 to present (shown) . . . . . .$59.99

62040 Fits all 4-speed FL models with aluminum headlight nacelles from 1960 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99

62310 Fits CC #’s 46534, 46336 ‘Teardrop’ headlight housing kits . . . .$110.99

62311 Fits CC #’s 26747 ‘Spearpoint’ headlight housing kits . . . . . . . . .$110.99


65394

65395

65396

‘Millennium’ Triple Tree Light Bars by Pro-One™

Chrome-plated billet marker light bar mounts through the headlight mounting bolt and features flush mounted elliptical amber lenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.95Smooth Ball Milled

65393 65394 For Wide Glide® front ends65395 65396 For narrow glide front endsNote: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.

65393

Doss Marker Light Kits and Mirror MountsComplement your Original Equipmentturn signals with a pair of our Doss mark-er lights. They come with one or two 12-volt single filament bulbs, and bolt-on inminutes to all models from 1972 to pres-ent. Each set includes a pair of lights and all necessary mounting hardware. Sold in pairs.

Complete Kits with Lights09155 Kit with twin bulb lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.49

09156 Kit with single bulb lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.99


Replacement Parts09152 Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.49

09128 Amber lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.49

09123 Red lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.49

09134 Single filament bulbs (box of 10) . . . . . . . . . . . . . . . . . . . . . . . . .$1.28 ea

09152

09155

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.61

Fork & Fender Marker Lights


Side View Marker Lights by Darrell HayesChrome 12 volt dual bulb markerlights mount to 35mm, 39mm or41mm fork tubes with integralbracket and included spacers andhardware. . . . . . . . . . . . . . . . .$92.4915083 Sold in pairsNote: Designed as supplemental lightingONLY, not to replace Original Equipmentrunning lights or turn signals.

Strut Mount Marker Light Set for Softail® Models by Darrell Hayes Custom ConceptsThis marker light set provides a new and unique look to the rear fender of your bike. Made of chrome-plated die-cast aluminum and includes both amber and red lenses. Uses twin single filament bulbs in each light which can be wired together as turn signals, or can function as running lights and turn signals. They may be mounted above or below the rear fender strut, and match our popularDarrell Hayes’ front marker lights (CC #15083) and our Darrell Hayesswingarm marker lights (CC #15235). Sold in pairs. . . . . . . . . . . . . . . . . . .$89.9915062 Fits all Softail® models from 1984 to present (except Deuce™ models)Note: Designed as supplemental lighting ONLY, and should not be used to replace OriginalEquipment running lights or turn signals. Will not work with sissy bars and saddlebags exceptin custom applications. When used in conjunction with the Original Equipment license platebracket on FX Softail® models, it may be necessary to modify the bracket.

Custom Marker Lights by Darrell HayesTwo-piece housings clamp securely to the fork tubes and include plasticsleeves for universal attachment to 35mm, 39mm or 41mm fork tubes. They feature amber lenses with single or twin single-filament 12-volt bulbs (will not work with fork tins, or aluminum headlight housings).15081 Kit with single bulb lights (sold in pairs) . . . . . . . . . . . . . . . . . . . . .$79.99

15082 Kit with twin bulb lights (sold in pairs) . . . . . . . . . . . . . . . . . . . . . .$82.99

Replacement Parts12551 Single-filament bulbs (#168) pack of 10 . . . . . . . . . . . . . . . . . .$1.09 ea.




Chrome Wedge Slanted Marker LightsSmooth contoured marker lights are perfect for fender strut or saddlebagmounting. Design blends well with most flat surfaces. 12-volt dual filamentkit includes amber and red lenses, hardware and gaskets. . . . . . . . . . . .$80.9927616 Sold in pairsNote: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.

design by john reed

Lig

htin

g

5.62

Fender/Strut Marker Lights

5


Mirage® Marker LightsOur 12-volt marker lights were designed by the styling team at CustomChrome® and feature die-cast construction, flawless chrome-plating and a terrific look. Single or twin bulb versions with red or amber lenses. Mountflush to flat surfaces like struts or the sides of fenders.Note: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.

Marker Lights (sold in pairs)Red Amber

09110 09111 Single bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.29

09112 09113 Twin bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.39

Replacement Parts09101 Red lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.19


09134 Bulbs (box of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.89 ea.

TM

09061

Doss Wedge Marker LightsDie-cast construction, flawless chrome-plating and a unique custom look.Mount flush to flat surfaces like struts or the sides of fenders. 51/2"-long x11/4"-wide x 1"-tall.Note: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.

09061 Amber twin bulb lamps (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . .$43.49

Replacement Parts09064 Red lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.29


09134 Bulbs (box of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.89 ea.

‘Wedge’ Marker LightsChrome-plated die-cast wedge-shaped lights have single filament bulbs.They measure approx. 31/2"-long x 11/4"-wide. Sold in pairs.15101 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.49

15102 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.49

09102 Red lens ONLY (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.49

09103 Amber lens ONLY (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.49


1510115102

Slotted Marker LightsThis chrome marker light kit features custom ball milled slots accented witha black painted trim. Heavy duty die-cast construction looks like billet with-out the high cost. The flush mount design is ideal for custom turn signals,marker lights or running lights on fenders, fender struts, saddlebags etc.Kits include two 12 volt marker lights and mounting hardware. They meas-ure 1" x 6". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.99330720 Amber lamps (sold in pairs)Note: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.63

Fender/Strut Marker Lights

330780

Chrome “Arrow” Marker LightsArrow marker lights by CCI feature a chrome die-cast housing and contoured lens. Flush mount design is ideal for fender struts, fender sides or saddlebags. Complete with amberand red lenses and a choice of single or dual filament 12 volt bulbs. 1" x61/4" Sold in pairs. 330780 Arrow marker lights, single filament bulbs . . . . . . . . . . . . . . . . . .$57.99

330782 Arrow marker lights, dual filament bulbs . . . . . . . . . . . . . . . . . . .$57.99


Donnie Smith Mini Marker LightRounded profile and smooth, half-moon lenses define these versatile mark-er lights. They look great on everything from fender struts to hard bags.They mount to any flat surface, and use the small, wedge-type single fila-ment bulbs. Comes with both amber and red lenses, mounting hardwareand rubber base gasket. 1" diameter lens, 31/4" overall length.330790 Donnie Smith marker light, single filament . . . . . . . . . . . . . . . . .$34.99


Doss ‘Teardrop’ Marker LightsThe dual bulbs and distinctive shape of these Rick Doss-designed markerlights make them ideal for specialized lighting requirements. Easy-to-installapplications for many models from 1972 to present. Universal/rear fenderstrut mount with side lens and 3/8" mounting threads. . . . . . . . . . . . . . . .$74.9962058 Sold in pairs

Ness-Tech® 45º Mini Fender LightsDesigned to mount on any flat surface such as the side of the fender or fender rail. Measures 5/8"-thin. CNC-machined from 6061-T6 chrome-plated billet aluminum. Sold in pairs. . . . . . . . . . . . . . . . . . . . . . .$159.9504902 Red 04903 AmberNote: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.

Fender Strut Lights by KüryAkynAdd a clean, flowing look and supplemental lighting. Install on fenderstruts of all Softail® models from 1984 thru 2003. Sold in pairs. . . . . . .$89.9948211 Includes red and amber lensesNote: Does not fit with permanently mounted saddlebags or sissy bars. Designed as supplemen-tal lighting ONLY, not to replace Original Equipment running lights or turn signals.

Ness-Tech® Chrome-Plated Mini Marker LightsAt only 5/8"-thick, these chrome-plated billet aluminum 12-volt markerlights are super trick. 45 degree fender-mount or universal mount thatworks well front or rear. Sold in pairs.Amber Red

05562 05563 45° fender mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.95

05564 05565 Universal mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.95

Replacement Parts05215 Amber lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.94


05216 Light bulbs (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.95

05562

05563

05564

05565

Fender Marker Light Assemblies and LensesThese marker light assemblies and lenses have been used since 1980 on thefront and rear fenders of many models. Sold each.Rear Lenses15098 Red lens with Blue Dot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49

15096 Stock replacement red lens (repl. OEM 68046-79) . . . . . . . . . . . . .$4.99

Front Lenses15097 Amber lens with Blue Dot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49

15095 Stock replacement amber lens (repl. OEM 59180-80) . . . . . . . . . .$4.99

Complete Assemblies19327 Front with amber lens (repl. OEM 59082-79) . . . . . . . . . . . . . . . . .$18.49

19328 Rear with red lens (repl. OEM 59658-79) . . . . . . . . . . . . . . . . . . . . .$18.49

19328

19327

Lig

htin

g

5.64

Marker Lights

5


Marker Light Axle Covers by Darrell HayesRedefine your bike with these chrome die cast rear axle covers. Includesintegrated marker lights for the ultimate look. Fits Softail® models from1986 to present. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$152.6415235 Sold in sets

Swingarm Marker Light KitAdd style and visibility. Light replaces the Original Equipment rear axleadjusters and swingarm end caps. Kit includes hardware, 12-volt bulbs and both amber and red lenses. Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $69.9929310 Fits Dyna Glide models from 1991 to presentNote: Requires drilling to run wires through swingarm

design by john reed

Swingarm Marker LightsIncrease rear visibility and style with our Bob McKay-designed swingarmmarker lights and end caps. Die-cast, chrome-plated aluminum with chromehardware, 12-volt bulbs, and both amber and red lenses. They replace theOriginal Equipment rear axle adjusters and swingarm end caps. Sold in pairs.09040 Fit all Dyna Glide models from 1991 to present . . . . . . . . . . . .$59.99

09041 Fit all 4-speed FL and FX models from 1973 thru 1986 and all Sportster® models from 1979 to present . . . . . . . . . . . .$80.44

09040

Indian Head Fender LampFor a vintage look on your bikejust add our fender lamp that fea-tures a molded Indian Head face inthe white plastic lamp lens.Perfectly fits the curvature of mostfull front fenders used with 16"front wheels.27512 Chrome housing . . .$46.99

27514 Replacement white lens . . . . . . . . . .$6.49

15095

15098

Front Fender Trim LightsLightweight chrome-plated ABSlights add attractive side-mountedrunning lights. Splice into existingfender tip light wiring for anattractive installation. Sold in pairs. . . . . . . . . . . . . . . .$45.9976013 Fit 4-and 5-Speed FL, FLT,

FLHT, FLHS and Road King®

models 1973 thru 2003

LED Fender Lights by AdjureThese LED units will pop right into place in the Original Equipment holderson the front and rear fenders of most FL Softail® and ‘Touring’ models from1980 to present. No need for a load equalizer just plug them in and rideoff. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.90634000 Red (rear) 634001 Amber (front)

15097

15096


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.65

Rear Fender Marker Lights & Brackets

Chrome ‘39’ Style Marker LightsStyled after the classic good looks of 1939 Fordtaillights, these marker lights add just the righttouch to your classic ride. Front lights fit all mod-els with side bolts in the triple trees. Rear lightsare attached to a chrome bracket that is held inplace by the Original Equipment taillight, and fitall models (except those with Fat Bob fendersand 1998 thru 2003 XL1200S) from 1973 thru 1999.27042 Rear marker light and bracket . .$107.89

27039 Front marker lights (sold in pairs) . . . . . . . . . . . . . . . . . . . .$99.99

Note: Designed as supplemental lighting ONLY, not to replaceOriginal Equipment running lights or turn signals.

Doss V-Style Rear Turn Signal KitSignal your intentions with this new kit from Rick Doss. The full kit comes with Magnumbullet lights and there’s also a V-style bracket that uses some Original Equipment turnsignal assemblies. A matching spotlamp mounting bar may be found on page 5.16 of thiscatalog section. Fits 4-speed FL models from 1974 thru 1984, Heritage Softail® modelsfrom 1986 to present, and FLT, FLHT, FLHS and Road King® models from 1991 to present.46631 Kit with Magnum bullet lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$191.09

46698 Bracket only with mounts for CC #28025 Magnum lights . . . . . . . . . . . . . . . . .$143.89

46697 Bracket only with adapters for various turn signals . . . . . . . . . . . . . . . . . . . . . . .$119.99

Note: Even though CC #46697 fits all of the models listed above, you must use Sportster®/Dyna Glide turn signal assemblies as shown.

46631

46697

Ness-Tech® ‘Legacy’ Turn SignalsChrome billet custom rear lighting. Single filament lights have amber lenses (optional red lenses available). Kits fit all 4-speed FL models 1974 thru 1984, FL Softail® models from1986 to present, and all Touring models from 1991 to present(taillights not included).05663 For Ness-Tech® billet taillights

(CC #'s 05631, 05633) . . . . . . . . . . . . . . . . . . . . . . . . .$199.95

05215 Amber lens (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.94

05214 Red lens (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.94

05216 Single filament bulb (sold each) . . . . . . . . . . . . . . . .$1.95

Note: Designed as supplemental lighting ONLY, not to replace OriginalEquipment running lights or turn signals.

Rear Turn Signal Lightbar KitEnhance your visibility in style. This chrome unit is shorter-than-stock for a clean look and the lights each have two single filament bulbs that can be used as separate turn signaland running lights or wired together as brighter turn signals.Includes a set of amber and red lenses and fits 4-speed FLmodels from 1974 thru 1984, 5-speed FL Softail® models from1986 to present, and FLT, FLHT, FLHS and Road King® modelsfrom 1991 to present.29313 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$135.99

09134 Replacement bulbs (box of 10) . . . . . . . . . . . . . .$12.89 ea.

design by john reed

Lig

htin

g

5.66

European TÜV Marker Lights

5


Micro Mini Turn Signals with TÜV by Kellermann®

These turn signals are designed to match with the handlebar- mounted turn signals by Kellermann®. CC offers three different versions which are preparedto mount on plain surfaces. When mounting on slant surfaces, the additional purchase of a specially designed adaptor is required. The TÜV-approval is validonly for use as rear turn signals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.39Micro Mini Turn Signals Adapters Extensions (1") Extensions (1,6") Repl. Bulb (Micro Mini) Thread Extensions M8 x 40mm86815 Chrome 86818 Chrome 86822 Chrome 86825 Chrome 86828 Single bulb 686217 Chrome86816 Steel 86820 Steel 86824 Steel 86827 Steel 86829 Power resistor 686218 Steel86817 Black 86819 Black 86823 Black 86826 Black N/A 686219 Black

Handlebar Turn Signals andVibration Dampeners with TÜVInnovative turn signals with integral vibrationdampeners to mount into the handlebar ends.These turn signals feature a halogen lamp andthey are ECE 50.11 approved. Fits handlebarswith 12-24mm inner diameter. Sold each.85068 Chrome-plated steel . . . . . . . . . . . .$150.79

85069 Satin finished stainless steel . . . . .$180.49

85070 Black anodized brass . . . . . . . . . . . .$121.09

85071 Satin finished aluminum . . . . . . . .$105.59

85817 Black aluminum . . . . . . . . . . . . . . . .$121.69

686220 Polished aluminum . . . . . . . . . . . . .$104.99

686221 Polished stainless steel . . . . . . . . . .$125.19

85808 Replacement bulb . . . . . . . . . . . . . . .$17.29 Chrome ABS Mini TurnSignals with TÜVChrome-plated ABS plastic turnsignals with 30mm mounting stem,wires and M10 thread. They are78mm long and have a diameterof only 50mm. Sold each. . .$10.4986014 Front left, rear right86015 Front right, rear left

JOS Aluminum MiniTurn Signals with TÜVOne of the smallest turn signalsavailable with TÜV approval inEurope (60mm in diameter). Theyare sold without the stainless steelstems which are available sepa-rately, but may be mounted to the Original Equipment stems.85174 Mini turn signal

(sold in pairs) . . . . .$202.49

85175 Stainless steel mounting stem ONLY (38mm x 15mm) sold each . . . . . . . . .$23.39

Chrome Bullet Lights with TÜVThe most popular turnsignals all over the worldare now available withGerman TÜV approval.These chrome-plateddie-cast bullet lights feature a single filamentbulb and an amber plastic lens. Sold each.85868 Bullet light

assembly withTÜV . . . . . .$53.79

85869 Replacementamber lens with TÜV ONLY . . . . .$13.99

Handlebar Turn Signals with TÜVChrome-plated ‘Bullseye’ turn signals to mount into the endsof handlebars. Available for 7/8" (22mm) and 1" (25,4mm)handlebars. Electronic flasher relay is required.84853 For 7/8" bars (sold in pairs) . . . . . . . . . . . . . . . . . . . .$21.29

84854 For 1"bars (sold in pairs . . . . . . . . . . . . . . . . . . . . . . .$21.29

84860 Replacement bulb (pack of 10) . . . . . . . . . . . . . .$96.59

Replacement LensesFor handlebar turn signals (CC #’s 84853 and 84854).84855 TÜV lens with ‘E’-mark (each) . . . . . . . . . . . . . . . . .$27.09

RBS Custom Turn Signal Sets with TÜVCNC-machined from billet aluminum and then chrome-plated or black anodized. Theseturn signals come with approved ‘E’-mark lenses, mounting studs, H4 21W bulbs and custom fork stop kit which is necessary for models with 5.0 gallon gas tanks. Sold in sets of 4.86047 Chrome-plated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$655.89

86039 Black-anodized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$655.89

84855 Replacement amber TÜV lens only (sold each) . . . . .$27.09

Custom Chrome® BulletMarker Lights with TÜVChromed or black small marker lights,available in grooved and smooth ver-sions. They come with ECE mark andamber lenses. Sold in pairs. . . . . . .$65.7987007 Smooth, chrome87008 Grooved, chrome686608 Smooth, black686609 Grooved, black

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.67

Load Equalizers & Accessories


Badlands Load Equalizer III• Fits all models equipped with the TSSM secu-

rity/alarm module or the TSM turn signalmodule from 1991 to present

• Must be used on all Harley-Davidson® modelsfrom 2000 to present!

• Works flawlessly with the new generation ofHarley-Davidson modules and is compatiblewith most of the custom turn signals avail-able, including (tiny) wedge bulbs and LEDs

• If you have a security key icon that is notfunctioning correctly (stays on all the time) oryour turn signals blink erratically, this modulewill solve any related problem

• This new module produces absolutely no heatand is also intended for the 1991 thru 1999H-D® standard turn signal modules

• Will run emergency flashers for any amountof time and is designed for parade use

• American-made with quality components699997 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$69.95

Badlands Automatic Turn SignalShut Off Module III• Gives any Harley-Davidson® or custom built

motorcycle without the 1991 and up self can-celler, the same similar convenient features

• Also will work well on custom manufacturedmotorcycles without the cancelling feature

• 9 second timed flashing that automaticallycancels or can be manually cancelled at anytime (quick lane change)

• Has a built-in solid state flasher and emer-gency flasher mode

• Built-in load equalizer runs LEDS up to 100watts per side

• Measures 27/8"-long x 13/8"-wide x 7/8"-deep• Includes wire connectors and simple wiring

diagrams for stock OEM wiring, and custombike wiring

• American-made with quality components12675 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$88.99

Badlands Load Equalizer I & IILoad Equalizer IDesigned to return amperage draw to the cor-rect factory specifications when aftermarketmarker lights are used to replace stock turn sig-nals. The self-cancelling Brain Box must have thecorrect draw in order to function properly. Theload equalizer can also be used in conjunctionwith a heavy duty flasher on early model bikes,when small marker lamps are being used as turnsignals. For LEDs use the Load Equalizer III. Fitsfrom 1973 thru 1999.12690 Load Equalizer I . . . . . . . . . . . . . . . . .$23.95

Load Equalizer IIThe Load Equalizer II performs exactly the samefunction as the Load Equalizer with the addedfeature of allowing you to retain emergencyflasher capability , when the bike is shut off.This unit has a built-in thermister, it helps cutdown on the heat while your bike is functioningin the emergency flasher mode. For LEDs use theLoad Equalizer III. Fits from 1973 thru 1999.36924 Load Equalizer II . . . . . . . . . . . . . . . . .$32.95

Badlands “The Illuminator” Run, Brake and Turn Module• Triples your visibility in the rear• Install a pair of red lens and your bike has 3

running lights. Hit your brake and you have 3brake lights. Touch your turn signal button,and you maintain your turn signal functionwhile the other side remains a running light,or if you are braking, a brake light

• Built-in load equalizer• Runs your stock OEM turn signals• Runs custom turn signals , Halogen and LEDS

too• Easy to follow instructions and connectors

included• Made in the USA with quality components• Fits all models from 1965 thru 1995 as well as

Sportster models from 1996 thru 1998, and1996 Dyna Glide and Touring models (newermodels use “Plug-In” version, CC #604900, for convenience)

36944 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$99.95

Run, Brake & Turn Signal Plug-In by BadlandsA three-in-one illuminator increases visibilityfrom the rear of the motorcycle! This plug-inmodule turns stock or custom rear turn signallights into combination running and brake lightswhile maintaining their turn signal function.Compatible with the new TSM and TSSM mod-ule/security system. Features include:• Built-in load equalizer• Designed for late model bikes that have the

factory security system, as well as earlier styleturn signal modules

• Works with Original Equipment turn signals• Works on single filament bulbs and halogens• Runs multiple marker lights or turn signals• Includes wire connectors and simple diagrams604900 Fits Sportster® models from 1999 thru

2003, Dyna Glide and Touring modelsfrom 1997 thru 2003,and Softail® modelsfrom 1996 thru 2003 . . . . . . . . . . . .$118.95

Illuminator Pro Module by BadlandsThis module is a custom bike builder's dream. All of the latest technology is built into this onemodule!• Recommended for stock models from 1973

thru 1990• Works great on custom bikes without self-

cancelling features• 11 second time flashing that automatically

cancels• Solid state built-in flasher• Manually cancel at any time for quick lane

changes• Built-in load equalizer runs LED’s up to

100 watts per side• Front run and turn on single filament bulbs

or LED’s/rear-run, brake and turn• Emergency flasher mode• Comes with easy to follow instructions

and connectors604904 Illuminator Pro . . . . . . . . . . . . . . . . .$118.95

Lig

htin

g

5.68

Turn Signal Modules

5


604901

Self-Cancelling Turn Signal Module by BadlandsThis unique module will give any Harley® that is not equipped with the selfcanceller, similar convenient features. Can be used with custom speedome-ters on late-model bikes. Includes simple wiring diagrams for stock OEMwiring, as well as custom wiring and also will work well on custom manu-factured motorcycles. Features include:• Flashing automatically cancels after 9 seconds• Can be manually cancelled at any time• Solid state flasher has built-in emergency flasher mode• Runs bulbs or LEDs• Measures 27/8"-long, 13/8"-wide, 7/8"-deep• Includes wire connectors and simple diagrams604901 Amp style 10 pin plug for models

from 1987 thru 1993 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$83.95

604902 Deutsche 8 pin plug for models from 1994 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$94.95

604903 Deutsche 12 pin plug for models from 1994 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$94.95

Self-Cancelling Turn SignalModulesThese are Original Equipment items. Excellentfor stock replacement or custom projects.$134.9975567 Replaces OEM 68540-9675566 Replaces OEM 68537-83G

75567

75566

Custom Chrome® Turn SignalLoad EqualizerVery small designed load equalizer exclusivelyfor Custom Chrome®. . . . . . . . . . . . . . . . . . . . .$19.95686596 Sold each

Back-OFF™ Brake Light ModuleHelp those zoned-out drivers see you better.This compact solid-state electronic device con-verts an ordinary brake light into a high atten-tion-grabbing alert signal when you are stoppedor are stopping. When you apply your brakes,Back-OFF™ will automatically flash your brakelight three times, then hold it steady for 31/2 sec-onds. This signal is repeated as long as thebrakes are applied. This pattern is not random,it was selected for its ability to keep the atten-tion of the drivers behind you. Installs in min-utes with two connections. Made in the USA.330592 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.99

Circuit Breaker ClipsReproductions of the stock zinc-plated parts.Includes aluminum rivet. Used many applicationsto hold the turn signal flasher unit and the circuit breaker. . . . . . . . . . . . . . . . . . . . . . . . . . .$1.62 ea.19295 Replaces OEM 9952 (sold on a card of 10)

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.69

Miscellaneous Lighting


Custom Turn Signal Lenses by Motor City Cycle• Easy to install• Fits with visors on rear turn signals• Also fits front turn signals• Generates better side visibility for safety• Turn signal lenses available in red or amber• Sold in pairs

Fits most Sportster®, Dyna Glide, FXR, Fat Boy®, Night Train®,Springer Softail®, FLST and FLSTS Models from 1986 thru 2001Part # Turn Signals Design Color

623501 Rear Skull Red . . . . . . . . . . .$49.99

623503 Rear Maltese Red . . . . . . . . . . .$49.99

623504 Rear Skull Amber . . . . . . . .$49.99

623506 Front Skull Amber . . . . . . . .$49.99

623508 Front or Rear Maltese Amber . . . . . . . .$49.99

Fit most Heritage Softail®, Road King®, Road Glide®, Tour Glide®

and Electra Glide® Models from 1986 to PresentPart # Turn Signals Design Color

623500 Rear Skull Red . . . . . . . . . . .$49.99

623502 Rear Maltese Red . . . . . . . . . . .$49.99

623505 Front Skull Amber . . . . . . . .$49.99

623507 Front or rear Maltese Amber . . . . . . . .$49.99

Note: On Road Glide® models and bikes with horizontal front turn signals, use rear style signalson front, except on Flames.

Custom Taillight Lenses by Motor City CycleAdd a cool touch with these customdesigned taillight lenses.• Available in a Skull, Flame

or Maltese Cross design• Feature clear lenses on top to

illuminate the license plate• Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99

Fit most Models with Built-In Reflector (except Deuce™ Models)from 1999 to Present623509 Skull lens623510 Flame lens623511 Maltese Cross lens

Fit most Models from 1973 thru 1998623512 Skull lens623513 Flame lens623514 Maltese Cross lens

‘Sine Waves’ by Glow JobWant your ride to be noticed and stand out in the crowd?Dr. Neon’s ‘Sine Waves’ is just want you’ve been looking for!These spark plug wires come in a variety of colors that cre-ate an intense neon glow on your motor. Include hi-per-formance black wire, chrome mounting bracket and allinstallation hardware. Fit all fuel injection, and High EnergyIgnition (HEI) coil systems. Sold in pairs.609206 Yellow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95

609207 Green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95

609208 Orange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95

609209 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95

609210 Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95

690211 Purple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95Purple

Lig

htin

g

5.70

Blue Dot Lenses & Trim

5


12969

12968

12967

12966

12965

12964

12963

12962

12961

12959

09695

Blue Dot Lenses and Grill KitsTop-quality plastic lenses with plastic blue dots inchrome mounting rings.12961 Jewel and mounting ring only

(sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . .$7.99

Taillight Lenses12962 Fits all models from 1973 thru 1998

as well as 1999 Softail® models (except FLSTS models) . . . . . . . . . . . . . . .$15.49

12965 Tombstone lens for all models from 1947 thru 1954 . . . . . . . . . . . . . . . . . .$9.49

12966 Fits all models from 1955 thru 1972 . . . .$9.49

12959 Lucas lens to fit CC #19647 taillight . . . .$9.49

12968 Cateye lens (includes mounting gasket) to fit CC #19762 Cateye taillight . . . . . .$10.99

19903 Lens for CC #’s 19900 and 19907 Fat Bob taillight kits (not shown) . . . . .$16.99

Taillight Lens and Grill Kits09695 Fits all models from 1973 thru 1998 as well

as 1999 Softail® models (except FLSTS andmodels with Fat Bob fenders) . . . . . . . .$25.94

Turn Signal LensesSold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.9912963 Fit all Sportster®, FX and FXR models

from 1973 thru 1985 and 5-speed FLT and FLHT models from 1980 thru 1985

12964 Fit all 4-speed FL or 5-speed FLT, FLHT and FLHS models from 1963 thru 1985

12967 Fit all Sportster®, FXR, Dyna Glide and FX Softail® models from 1986 thru 2001(except Deuce™ models)

12969 Fit all FLT, FLHT, FLHS, Road King® and mostFL Softail® models from 1986 to present

Trim Rings and Taillight GrillsFashioned after the chevrons found on the rear fender of many older mod-els. Two taillight lens kits are also available which include a taillight lens, aspecial taillight grill and a blue dot.Note: Installation of these accessories may be in violation of FMVSS Standard #108.

Chevron Style Taillight Grills09699 Fits all models from 1973 thru 1998 as well as 1999 Softail®

models (except FLSTS and models with Fat Bob fenders) . . . .$14.84

Blue Dot Grill Kits09695 Fits all models from 1973 thru 1998 as well as 1999 Softail®

models (except FLSTS and models with Fat Bob fenders) . . . .$25.94

Trim Rings09700 Fits all models from 1973 thru 1998 as well as 1999

Softail® models (except FLSTS models) . . . . . . . . . . . . . . . . . . . . . .$15.49

09695

09699

09700


26682

26681

Wiring Harness Pins and SocketsReplacements for the Original Equipment parts used in manyapplications since 1971. Sold in packs of 10. . .$3.2926681 Pins (repl. OEM 72039-71)26682 Sockets (repl. OEM 72038-71)

Premium™

Hazard FlasherStock replacement hazard lightflasher unit for all models (except1989 thru 1990 Touring models)from 1965 thru 1990. . . . . . . .$4.9925205 Replaces OEM 68541-64A

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.71

Lenses


Jeweled Blue Dot Lenses by Chris ProductsTop-quality plastic lenses with plastic blue dots inchrome mounting rings. Made in the USA.22961 Jewel and mounting ring ONLY

(sold in pairs) . . . . . . . . . . . . . . . . . . . . .$2.99

Taillight Lens22962 Fits all models from 1973 thru 1998

as well as 1999 Softail® models (except FLSTS models) . . . . . . . . . . .$10.89

Turn Signal LensesSold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.89Amber Red

22223 22969 Fit all FLT, FLHT, FLHS, RoadKing® and most FL Softail®

models from 1986 to present22221 22967 Fit all Sportster®, FXR, Dyna Glide

and FX Softail® models from 1986thru 2001 (except Deuce™ models)

22222 22963 Fit all Sportster®, FX and FXRmodels from 1973 thru 1985 and 5-speed FLT and FLHT mod-els from 1980 thru 1985

22224 22964 Fit all 4-speed FL or 5-speed FLT,FLHT and FLHS models from 1963 thru 1985


Bullet Shaped Turn Signal LensesFor an instant custom lens look, all you need is a screwdriver. Built to D.O.T. specifications. Sold in pairs. . . . . . . . . . . . . .$31.99Amber Red

14992 14991 Fit all Sportster®, FXR, Dyna Glide and FX Softail® models from 1986 thru 2001 (except Deuce™ models)

14994 n/a Fit all FLT, FLHT, FLHS, Road King® and most FL Softail®

models from 1986 thru 199914996 14995 Fit all 4-speed FL or 5-speed FLT, FLHT and FLHS models

from 1963 thru 1985

22221 22967 22223

22964 22222

22962

1499214995

Amber Turn Signal Lenses with Blue DotsTop-quality plastic lenses with the plastic blue dots centered and securelyheld in place by chrome mounting rings. Sold in pairs. . . . . . . . . . . . . .$16.9915122 Fit all Sportster®, FX and FXR models from 1973 thru 1985

and 5-speed FLT and FLHT models from 1980 thru 198515121 Fit all Sportster®, FXR, Dyna Glide and FX Softail® models

from 1986 thru 2001 (except Deuce™ models)15124 Fit all 4-speed FL or 5-speed FLT, FLHT and FLHS models

from 1963 thru 198515123 Fit all FLT, FLHT, FLHS, Road King® and most FL Softail® models

from 1986 to present12961 Jewels and mounting rings only . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99


15124

1512215121

15123

22969 22224 22963

Lig

htin

g

5.72

5


Radiantz LED Light KitsRadiantz L.E.D. KitsGet the LED out and dress-up your bike by adding these awesome Radiantzlighting kits! The wide selection includes everything from taillights to turn signals providing the perfect way to make your bike stand out in a crowd.

61370

Dual Element Conversion DiodeThis diode will permit CC #’s 61369 and 61370to work as a running light and a brake light.61397 Sold each (not shown) . . . . . . . .$15.39

Add-On License Plate LightsChrome billet lights bolt onto vertically and horizontally-mounted license plates. Available in 3" or 6"-long white L.E.D. kits. Sold each.61387 3"-long kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$78.19

61388 6"-long kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$83.59

61387

61388

Super-Bright L.E.D. Kits for Original Equipment TaillightsConsists of a red running light and brake light,and fits in your existing Original Equipment or aftermarket lens and bucket. No wiringrequired, just plug it in.Kits without Turn Signals61376 Fits all models from 1973 thru 1998

and 1999 Softail® models . . . . . . .$146.99

61377 Fits all models from 1999 to present(except 1999 Softail® and 2000-upDeuce™ and V-Rod® models) . . . . .$146.99

Kits with Turn Signals61382 Fits all models from 1973 thru 1998

and 1999 Softail® models . . . . . . . .$155.19

61383 Fits all models from 1999 to present(except 1999 Softail® and 2000-upDeuce™ and V-Rod® models) . . . . .$155.19

Super-Bright ‘Tombstone’ L.E.D. KitsConsists of a red running light and brake light.Wiring required.Fit ‘Tombstone’ Taillights (CC #’s 19644 and 19660)61379 Without turn signals . . . . . . . . . . . .$133.19

61385 With turn signals . . . . . . . . . . . . . . .$146.99

Fit Doss ‘Tombstone’ Taillights (CC #’s 46400 and 46409)61380 Without turn signals . . . . . . . . . . . .$146.99


61380

61361 61362

6136561365

Turn Signal Bulbs for Softail®, Sportster®,FXR and Dyna Glide ModelsL.E.D. bulbs fit all Deuce™ models from 2000 to present, and all models (except FLT, FLHT,Road King®, V-Rod® and FL Softail® models) from 2002 to present. Sold in pairs. . . . . .$106.79Single Filament L.E.D. Dual Filament L.E.D.61361 Red 61393 Red61362 Amber 61394 Amber

L.E.D. bulbs fit all models from 1986 thru 2001(except FLT, FLHT, FLHS, Road King®, 2001 FXDXand FXDXT models, FL Softail® and Deuce™

models). Sold in pairs . . . . . . . . . . . . . . . . . . .$106.79Single Filament L.E.D. Dual Filament L.E.D.61365 Red 61391 Red61366 Amber 61392 AmberNote: Dual filament bulbs may require re-wiring on somemodels.

Turn Signal Bulbs for ‘Touring’ ModelsL.E.D. bulbs fit all FLT, FLHT, FLHS, Road King®

and FL Softail® models from 1986 to present.Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$106.79Single Filament L.E.D. Dual Filament L.E.D.61363 Red 61389 Red61364 Amber 61390 Amber

Flexible L.E.D Strip KitsThe housings utilize double-sided 3M tape, per-fect for custom bikes, and have 1mm spacingbetween L.E.D.’s in addition to being water-resistant. These strips cannot be cut.61367 Amber 13/4"-long strips

(sold in pairs) . . . . . . . . . . . . . . . . . . . .$37.69

61368 Red 13/4"-long strips (sold in pairs) . . . . . . . . . . . . . . . . . . . .$37.69

61369 Red 6"-long strip (shown)sold each . . . . . . . . . . . . . . . . . . . . . . . .$60.99

61397 Conversion diode – permits CC #’s 61369,61370 (above) to work as a runninglight and a brake light . . . . . . . . . .$15.39

Super-Bright ‘Cat Eye’ L.E.D. KitsConsists of a red running light and brake light,and fits in the existing lens and bucket (CC #19762). Wiring required.61375 Without turn signals . . . . . . . . . . . .$133.19


Super-Bright L.E.D. Kits for Extra-Wide Custom Fat Bob TaillightsConsists of a red running light and brake light,and fits in the existing lens and bucket (CC #’s 19900, 65474). Just plug it in.61378 Without turn signals . . . . . . . . . . . .$160.39


61371

61372

61373

61374

L.E.D. Strip KitsWater-resistant, and can be cut to any size. The housings use double-sided 3Mtape, perfect for custom bikes. The red and amber kits have 1mm space betweenthe L.E.D.’s and the green, blue and white strips have 1/2" spacing. The lightedportion of the strips is 12"-long. Sold each.61370 Red . . . . . . . . . . . . . . .$113.69 61373 Blue . . . . . . . . . . . . . . .$106.79

61371 Amber . . . . . . . . . . . . .$113.69 61374 White . . . . . . . . . . . . .$106.79

61372 Green . . . . . . . . . . . . .$106.79 61397 Diode (see below) . . .$15.39

04938

04941


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.73

LED Lights & KitsDouble Brite Amber LEDBox by Paul YaffeOriginalsThese super bright amber LEDs pro-duce twice the amount of light found in standard LED displays. They haveamber LEDs and clear lenses. Housingsare fully sealed and drilled at the endsto offer bolt on installation and versa-tility for custom designs. Feature athree wire harness that permits manywiring applications and lighting con-figurations. Made in the USA.47679 Amber 41/2" . . . . . . . . . .$124.99

47681 Amber 61/4" . . . . . . . . . .$154.99

47683 Amber 81/4" . . . . . . . . . .$179.99

Note: Designed as supplemental lighting ONLY,not to replace Original Equipment runninglights, brake lights or turn signals.

LED LightstripsPerfect for building custom lights. Super-brightassemblies are complete with 90" wire leads.09724 12 bulbs (4"-long) . . . . . . . . . . . . . . .$35.49

LED Upgrade Kits for Ness-Tech® TaillightsThese kits were designed for convenient and easy upgrading of our Ness-Tech® standard taillights. They consist of pre-wired LED arrays that replace the conventional bulbs and sockets in the Ness-Tech® housings.04938 LED upgrade kit for Ness-Tech® Cateye Horizontal taillights . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.95

04939 LED upgrade kit for Ness-Tech® Cateye Angled slot taillights . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.95

04940 LED upgrade kit for Ness-Tech® Custom Horizontal taillight . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.95

04941 LED upgrade kit for Ness-Tech® Custom Racetrack taillight . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.95

04942 LED upgrade kit for Ness-Tech® Custom Radial taillight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.95Note: Installation of these accessories may be in violation of FMVSS Standard #108.

CateyeHorizontal

Cateye Angled

Custom HorizontalCustom Radial Custom Racetrack L.E.D. Stoplight/Taillight Bulb by Candlepower®

From one of the most trusted names in lightingcomes this unique bulb that replaces any 1157bulb. When the taillight is in service, the LED’srotate and reverse direction every two seconds.When the brake light is activated, the LED’spulse more than two times per second. The bulbis also brighter, but draws less power than aconventional bulb and will last longer. . . .$34.9915178 Sold eachNote: For off-road and show use ONLY.

23580Glow-Job Neon Tube Light Kits• Neon tube sets can be placed on your bike to give off a noticeable glow

on either the frame rails, spark plugs or under your gas tank• Sets come in different shapes, colors and designs• Spark plug sets will not produce power loss even on high-performance

ignition systems• Feature a lifetime warranty against defects in materials or workmanship

Neon Tank and Frame KitsMount under your tank or on your frame rails.Neon ‘Double Tube’ Kits (sets of two)23580 Purple . . . . . . . . . . . . .$219.99

23581 Blue . . . . . . . . . . . . . . .$219.99

23582 Red . . . . . . . . . . . . . . . .$219.99

Neon ‘Triple Tube’ Kits (sets of three)23583 Purple . . . . . . . . . . . . .$326.99

23584 Blue . . . . . . . . . . . . . . .$326.99

23585 Red . . . . . . . . . . . . . . . .$326.99

‘Lazer Fusion’ Module Kits by Glow-Job™

These intensely bright ‘Lazer Fusion’ modules are 100 times brighter thansuper bright LED’s. They glow and shine so that they are a perfect compan-ion to other neon kits. They’re designed to fit where neon tubes can’t, suchas front and rear wheels, behind the horn, small air cleaners and in verytight places. There is no limit to how many you can put on a bike. They canall wire to the same switch if need be and are economic to use. They have a diode and resistor built-in so you can’t hook them up backwards, toggleswitch and all necessary installation hardware. Sold in a pack of 4 or soldeach. The Lazer Fusion ‘Expansion Module’ includes one Lazer Fusion mod-ule ONLY (does come with toggle switch). Measures 11/16" x 11/16" x 3/8".Comes with manufacturer's lifetime warranty.Color Sold Each Pack of 4 Expansion ModuleRed 609190 $39.95 609195 $109.95 609221 $29.95

Blue 609191 $39.95 609196 $109.95 609222 $29.95

Purple 609192 $39.95 609197 $109.95 609223 $29.95

Green 609193 $39.95 609198 $109.95 609224 $29.95

Amber 609194 $39.95 609199 $109.95 609225 $29.95

Lig

htin

g

5.74

5


Replacement BulbsILLUS. Part # PACK QTY. CLASS ANSI # VOLTS WATTS AMPS C/P CONTACT NOTES

#1 12521 Box of 10 S-8 1154 6 – 2.63 21/3 D.C. Index repl. OEM 68165-47

#1 12522 Box of 10 S-8 198/1157 12 – 2.25 32/3 D.C. Index repl. OEM 68168-89

#1 12515 Card of 20 S-8 198/1157 12 – 2.25 32/3 D.C. Index repl. OEM 68168-89

#1 15199 Box of 10 S-8 1157NA 12 – 2.25 32/3 D.C. Index Amber

#1 15184 Box of 10 S-8 1157R 12 – 2.25 32/3 D.C. Index Red

#1 15141 Box of 10 S-8 1157R 12 – 2.25 50/14 D.C. Index Red Super Bulb

#1 12530 Sold each S-8 1034/1157 12 – 2.25 50/14 D.C. Index Super Bulb

#1 12531 Box of 10 S-8 1034/1157 12 – 2.25 50/14 D.C. Index Super Bulb

#2 19098 Box of 10 S-8 – 12 23/8 – – D.C. Bay

#3 12547 Box of 10 S-8 199/1156 12 – 2.25 32 S.C. Bay repl. OEM 68572-64B

#3 15198 Box of 10 S-8 1156NA 12 – 2.25 32 S.C. Bay Amber

#4 12523 Box of 10 G-6 – 12 – 2.25 32/3 D.C. Index

#4 31590 Box of 10 G-6 – 12 – – 21/6 D.C. Index

#4 330269 Box of 10 – – 12 20/5 – – D.C. Index Dual filament

#5 15114 Box of 10 G-6 – 12 – 2.25 32 S.C. Bay

#5 27999 Box of 10 G-6 – 12 23 – – S.C. Bay

#6 09134 Box of 10 T-31/4 192 12 – .33 3 Wedge-2

#6 12551 Box of 10 T-31/4 168 12 – .35 3 Wedge-2

#6 12552 Box of 10 T-31/4 161 12 – .19 1 Wedge-2

#7 12520 Box of 10 G-31/2 53 12 – .12 1 Mini Bay High-beam indicator

#8 27823 Box of 10 – – 12 3 – – S.C. Bay

#9 27824 Box of 10 – – 12 3 – – Push-In

#9 75264 Sold each – – 12 – – – Push-In dash indicatorrepl. OEM 68024-94

#10 12544 Sold each RP-11 – 6 25/25 – – D.C. Prefocus repl. OEM 67750-35

#10 12543 Sold each RP-11 – 12 35/35 – – D.C. Prefocus

#11 12476 Sold each RP-11 – 6 25 – – S.C. Prefocus repl. OEM 68715-49

#11 12477 Sold each RP-11 – 12 35 – – S.C. Prefocus repl. OEM 68715-64

#12 12527 Sold each – H-4 12 60/55 – – 3-Lug repl. OEM 67697-81T

#12 15112 Sold each – H-4 12 60/55 – – 3-Lug Rainbow

#12 12529 Sold each – H-4 12 100/55 – – 3-Lug 100-watt high beam

#13 26368 Sold each – – 12 – – – Two Wire repl. OEM 68574-86




Replacement Bulbs

Red Taillight and Turn Signal BulbsStandard BulbRed-coated light bulb is ideal for use with clear lenses.12-volt dual element bulb replaces 1157R. . . . . .$37.99 ea.15184 Box of 10

Super High-Intensity BulbThis red-coated light bulb is recommended for use withour clear lenses. The 12-volt dual element bulb is ratedat 50/14 candlepower instead of the standard 32/3 candlepower and replaces an 1157R. . . . . . . . . . .$59.99 ea.15141 Box of 10

Super BulbHigh intensity stop and taillightbulb has nearly 100% greater illu-mination. Long life and vibrationresistance from triple-wound dou-ble filament. 12-volt. Replaces #’s1034 and 1157.12530 Sold each . . . . . . . . .$6.49

12531 Pack of 10 . . . . . . . .$59.99

Note: May be unsuitable for installationswith limited clearance with plastic lenses.

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

5.75

Replacement Bulbs


1 2

3 4

5

8 9 10

Double ContactBayonet Candelabra

Double ContactBayonet Candelabra Index

Double ContactBayonet Candelabra Index

Single ContactBayonet Candelabra


Double ContactCandelabra Prefocus

Push-in


6 7Miniature BayonetWedge-2

Single ContactCandelabra Prefocus11 12 133-Lug 2-Wire

Lig

htin

g

5.76

5


Sealed Beams & Bulbs

5.76

Replacement Sealed BeamsILLUS. Part # PACK QTY. CLASS ANSI # VOLTS WATTS CANDLEPOWER CONTACT NOTES

#14 15089 Sold each PAR-56 6006 6 50/40 27,000/20,000 3-Lug repl. OEM 67717-48B

#14 15090 Sold each PAR-56 6014 12 60/50 32,000/25,000 3-Lug repl. OEM 67717-64

#14 26420 Sold each PAR-56 H6024 12 65/40 35,000/27,000 3-Lug H-4/Halogen

#15 12507 Sold each PAR-46 4020 6 30/30 25,000/15,000 3-Lug repl. OEM 67717-59

#15 12508 Sold each PAR-46 4467 12 50/35 23,000/10,000 3-Lug repl. OEM 67717-65A

#15 26425 Sold each PAR-46 H4467 12 50/35 27,000/12,500 3-Lug H-4/repl. OEM 67698-81A

#16 26400 Sold each PAR-36 4456 12 30/30 10,000/5,000 3-Lug Hi-Lo Beam

#17 12482 Sold each PAR-36 4415A 12 35 7,000 Screw Amber

#17 12524 Sold each PAR-36 4449 12 30 22,000 Screw repl. OEM 68674-69

#18 12484 Sold each PAR-36 4416A 12 30 25,000 Screw Amber

#18 12590 Sold each PAR-36 4416 12 30 35,000 Screw

#19 15085 Sold each PAR-36 H7616 12 37.5 70,000 Screw H-4/Halogen

#19 15086 Sold each PAR-36 H7604 12 50 110,000 Screw H-4/Halogen

16 17

18 1914 15

Replacement BulbsReplacement 12-volt bulbs for taillights, turn signals, marker lights and accessory lamps.

Part# Watts Application Filament Notes QTY. Price84856 21 Taillights single spherical 10 . . . . .$57.99

84860 18 Handlebar turn signals single spherical bulb 10 . . . . .$96.59

84863 10 Ness® taillights single fuse type 10 . . . . .$41.29

84970 5 Taillights single spherical 10 . . . . .$20.19

85808 21 Kellermann turn signals single Halogen 1 . . . . .$17.29

85815 – Pro-One™ marker lights single w/socket & wire 1 . . . . .$10.49

85968 10 TÜV approved bullet lights single 10 . . . . .$26.49

86062 1.2 German 48/60mm gauges single w/socket & wire 1 . . . . . .$4.99

lighting - custom bikes by mike 5.pdf · 2019. 11. 29. · lighting electrical exhaust intake...

Documents