accord 1998 auto tranny diagram

94626

Acura 2.3CL 1998-99 B6VAAccord 1998-02 BAXA/MAXA 2.3L

Odyssey 1998 MDWA 2.3LPrelude 1997-01 M6HA 2.2L

-2-

CounterShaft

Main Shaft3rd & 4th

Counter ShaftBearing

Transmission Housing

ReverseIdlerGear

Reverse IdlerGear Shaft& Holder

Speed Sensor,Counter Shaft

MainShaftBearing

SecondaryShaft Bearing

SecondaryShaft1st & 2nd

Right Side Cover

-3-

Not used in Prelude New shaft lock nuts, torque to 123 ft. lbs. / 167 N•m

CounterShaft

MainShaft

SecondaryShaft

Note: Main shaft has left-hand threads

-6-

TORQUE: 12 N•m (8.7 lbf•ft)TORQUE: 44 N•m (33 lbf•ft)

Not used in Prelude

-7-

STANDARD: 12 - 25 Ω

STANDARD: 12 - 25 Ω

-8-


Odyssey 1998 MDWA 2.3L

STANDARD: Approx. 5 Ω

Prelude 1997-01 M6HA 2.2L

STANDARD: Approx. 4.0-9.0 Ω

-9-

Line N or P No (or low) Torque converter, 850-910 kPa 800 kPa/120 psiline pressure ATF pump, pressure 120-130 psi

regulator valve,torque converter 900-960 kPa 860 kPa/130 psi*check valve 130-140 psi*

1st Clutch 1 No or low 1st 1st clutch 840-920 kPa 790 kPa/120 psipressure 120-130 psi

2nd Clutch 2 No or low 2nd 2nd clutchpressure

3rd Clutch D4 No or low 3rd 3rd clutch 890-970 kPa 860 kPa/130 psi*pressure 130-140 psi*

4th Clutch No or low 4th 4th clutchpressure

R Servo valve or 4thclutch

SHIFT LEVERPOSITION

FLUID PRESSURE

Standard Service LimitPRESSURE SYMPTOM PROBABLE CAUSE

*Odyssey only.

-10-



BAXA, B6VA, MDWAClutch End Plate-to-Top Disc Clearance:

Service Limit:1st Clutch: 1.15–1.35 mm (0.045–0.053 in.)2nd Clutch: 0.7–0.9 mm (0.028–0.035 in.)3rd Clutch: 0.6–0.8 mm (0.024–0.031 in.)4th Clutch: 0.4–0.6 mm (0.016–0.024 in.)

M6HAClutch End Plate-to-Top Disc Clearance:

Service Limit:1st Clutch: 1.15–1.35 mm (0.045–0.053 in.)2nd Clutch: 1.0–1.2 mm (0.039–0.047 in.)3rd Clutch: 0.6–0.8 mm (0.024–0.031 in.)4th Clutch: 0.4–0.6 mm (0.016–0.024 in.)

If the clearance is not within the service limits, select a new clutch end plate from theappropriate table.

Shift Control Solenoid

Power Flow

-11-

Odyssey 1998MDWA 2.3L

Prelude 1997-01M6HA 2.2L

Acura 2.3CL1998-99 B6VA

Accord 1998-02BAXA/MAXA 2.3L

O-RING

BONDED

SOME OF THE INFORMATION IN THIS BOOKLET MAY HAVE BEEN PROVIDEDOR APPROVED BY THE AUTOMATIC TRANSMISSION SERVICE GROUP AND/ORTHE AUTOMATIC TRANSMISSION REBUILDERS ASSOCIATION. THE INFOR-MATION CONTAINED HEREIN IS ACCURATE TO THE BEST OF OUR KNOWLEDGE.WE ARE NOT RESPONSIBLE FOR ANY INACCURACIES OR WARRANTY CLAIMSWHICH MAY RESULT FROM THE USE OF THIS INFORMATION.



3rd & 4th Clutch

accord 1998 auto tranny diagram

Documents