2. Insert three LR44 Button Cells into the battery compartment according to the polarity indicators on the bottom plate.

3. Close the BATTERY COMPARTMENT COVER securely with the screw.

Important: Please remove the batteriesif storing the globe for an extended period of time.

PAIRING YOUR DEVICE1. Prepare your device to pair using Bluetooth® technology, making sure you are within 33 feet of the speaker. Refer to your device’s owner’s manual for details if necessary.2. Press and hold the Power Button for 3 seconds. The LED Indicator light will flash blue quickly. The speaker will sound a guitar cord tone and enters pairing mode.3. Once the speaker is in pairing mode and your device is ready to pair, select “Eluma Lights Speaker”. If prompted, use 0000 as a PIN for the pairing code. Once the speaker is selected, it will sound a beep tone and the blue light will flash slowly to confirm pairing is complete.

LITHIUM-ION BATTERY WARNINGSThis device contains a non-removable lithium-ion battery. The battery must berecycled or disposed of properly. Contact your local waste management office for information on battery recycling or disposal.

FCC INFORMATIONThis equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This equipment may not cause harmful interference.

2. This equipment must accept any interference received, including interference that may cause undesired operation.

Modifications not authorized by themanufacturer may void the user’sauthority to operate this device.

FCC ID: 2ADOI-SP968

ELUMA LIGHTSTM SPEAKER SYSTEMSTARTER SYSTEM INCLUDES1 WIRELESS LIGHT-UP SPEAKERPLUS 4 SMALL SATELLITE GLOBES(Additional Satellite Globes sold separately)

LOCATION OF PORTS ANDCONTROLS (MASTER SPEAKER)

1. Speaker Grill

2. Speaker Translucent Body

3. LED Indicator

4. Power Button

5. Micro USB Charging Port

6. Light Control Zone

7. Base Stand

8. Micro USB Charging Cable (not shown)

CHARGING THE SPEAKER

1. Connect the USB Cable (included) to the Micro USB Port on the Speaker.2. With the speaker’s power off, plug the other end of the USB Cable into a USB Port on your computer.3. The LED Indicator light will illuminate Red while charging, and the light will go out when the speaker is fully charged. Charges in approximately 5.5 hours for up to 8 hours of listening enjoyment.

CHARGING THE MEDIUM GLOBE

1. Connect the USB Cable (included) to the Micro USB Port on the globe.2. Plug the other end of the USB Cable into a USB Port on your computer.3. The LED Indicator light will illuminate Red while charging and it will go out when the globe is fully charged.

INSTALLING THE BATTERIES IN SMALL GLOBE

1. Unscrew the BATTERY COMPARTMENT COVER.

LOCATION OF PORTS ANDCONTROLS (SMALL GLOBE)

1. Translucent Body

2. Battery Compartment Cover

3. Power Switch

LOCATION OF PARTSAND CONTROLS (MEDIUM GLOBE) (SOLD SEPARATELY)

1. Translucent Body

2. LED Indicator

3. Micro USB Charging Port12

543

6

7

1

23

1

2

3

SPECIFICATIONS

Speaker -Power Supply: 5V 500mATotal Output: 5 WattsRange: Class 2, up to 33 ft (10 m)Li-ion Rechargeable Battery: 2200mAhSpeaker Driver: Dia. 3.5 inch, 4 OhmCharging Time: Approx. 5.5 hoursBattery Life: Approx. 8 hoursCompatibility: Bluetooth® 2.0 or abovedevice with A2DP/AVRCP

Medium Globe –Power Supply: 5V 400mALi-ion Rechargeable Battery: 700 mAhCharging Time: Approx. 2 hoursBattery Life: Approx. 4 hours (LAMP mode) Approx. 12 hours (BEAT mode)

Small Globe –Battery Life: Approx. 4 hours (LAMP mode) Approx. 13 hours (BEAT mode)

The Bluetooth® word mark and logos are registered trademarks owned of Bluetooth® SIG, Inc. and any use of such marks by Brookstone is under license.

© Brookstone 2016

2. Double tap to enter MOOD LIGHT mode. The light will turn into changing rainbow color.

NOTE: Tap the LIGHT CONTROL ZONE once to select the specified single light color within the first two rainbow light cycles.

3. Triple tap to enter BEAT mode. The light will flash red 4 times to indicate entering BEAT mode. When the music is on, the changing rainbow light will dance to the music.

NOTES: • The light will turn into changing rainbow color if no audio signal is streaming to the speaker. • Turn up the music volume to make the beating light more visible.

4. Quadruple tap to enter PARTY mode. The light will flash white 4 times to indicate entering PARTY mode. When the music is on, the strobe light will dance to the music.

NOTES: • The light will turn into changing rainbow color if no audio signal is streaming to the speaker. • Turn up the music volume to make the strobe light more visible.

5. A single tap again in the Light Control Zone will turn the light off.

LISTENING TO YOURAUDIO DEVICE

1. Play your audio device as you normally would.2. Volume is adjusted on your audio device.3. To pause audio, press the Power Button on the Speaker. To resume audio playback, press the Power Button again.4. Press and hold the Power Button on speaker for 3 seconds. The speaker will sound a tone and power off.

TURNING ON/OFF LIGHT EFFECT (MASTER SPEAKER)1. Tap once in the Light Control Zone to turn the light on and enter the LAMP mode.

TURNING ON/OFF LIGHT EFFECT (SMALL GLOBE)1. Slide the Power Switch to ON.2. The globe will automatically sync to the master speaker.3. Use the master speaker to control the light effect of the globe. See steps under TURNING ON/OFF LIGHT EFFECT (MASTER SPEAKER). 4. Slide the Power Switch to OFF to turn the globe off to save battery power.

NOTE: You can sync unlimited globes to the speaker. Additional globes (SMALL/MEDIUM) are available for purchase in store.

TURNING ON/OFF LIGHT EFFECT (MEDIUM GLOBE)1. The globe will automatically sync to the master speaker. 2. Use the master speaker to control the light effect of the globe. See steps under TURNING ON/OFF LIGHT EFFECT (MASTER SPEAKER).

CARE AND STORAGEStore the speaker and globes in a cool, dry placeMerrimack, New Hampshire, USA 03054

800-846-3000 • Brookstone.com

318025 • 318024 • 318026