Coast Guard Approval Number: 162.050/9068/0 Expires: 10 July 2014

OIL POLLUTION PREVENTION EQUIPMENT The following device has been tested in accordance with

IMO Resolution MEPC.107(49)

DECKMA HAMBURG GmbH Kieler Strabe 316 HAMBURG D-22525

GERMANY

Model OMD-24; 15 ppm Bilge Alarm This is to certify that the 15 ppm Bilge Alarm listed above has been examined and tested in accordance with the Guidelines and Specifications contained in IMO Resolution MEPC.107(49). Equipment is manufactured by Deckma Hamburg GmbH to specification/assembly drawing nos. DH10810 dated 12/09/2008, DH 75500 dated 12/09/2008, and DH79100 dated 12/09/2008. A copy of this certificate should be carried aboard a vessel fitted with this equipment at all times. IMO Certificates of Type Approval do not expire and are valid for equipment manufactured at any time during the period of validity of this certificate. Test data and results attached in the appendix. This certificate documents compliance with 46 CFR 162.050.

*** END ***

THIS IS TO CERTIFY THAT the above named manufacturer has submitted to the undersigned satisfactory evidence that the item specified herein complies with the applicable laws and regulations as outlined on the reverse side of this Certificate, and approval is hereby given. This approval shall be in effect until the expiration date hereon unless sooner canceled or suspended by proper authority.

GIVEN UNDER MY HAND THIS 10th DAY OF

JULY 2009, AT WASHINGTON D.C. T. J. HALL Acting Chief, Engineering Division U.S. Coast Guard Marine Safety Center

TERMS: The approval of the item described on the face of the Certificate has been based upon the submittal of satisfactory evidence that the item complies with the applicable provisions of the navigation and shipping laws and the applicable regulations in Title 33 and/or Title 46 of the Code of Federal Regulations. The approval is subject to any conditions noted on this Certificate and in the applicable laws and regulations governing the use of the item on vessels subject to Coast Guard inspection or on other vessels and boats.

Consideration will be given to an extension of this approval provided application is made 3 months prior to the

expiration date of this Certificate.

The approval holder is responsible for making sure that the required inspections or tests of materials or devices covered by this approval are carried out during production as prescribed in the applicable regulations.

The approval of the item covered by this certificate is valid only so long as the item is manufactured in conformance

with the details of the approved drawings, specifications, or other data referred to. No modification in the approved design, construction, or materials is to be adopted until the modification has been presented for consideration by the Commandant and confirmation received that the proposed alteration is acceptable.

NOTICE: Where a manufacturer of safety-at-sea equipment is offering for sale to the maritime industry, directly or indirectly,

equipment represented to be approved, which fails to conform with either the design details or material specifications, or both, as approved by the Coast Guard, immediate action may be taken to invoke the various penalties and sanctions provided by law including prosecution under 46 U.S.C. 3318, which provides:

"A person that knowingly manufactures, sells, offers for sale, or possesses with intent to sell, any equipment subject to

this part (Part B. of Subtitle II of Title 46 U.S.C.). and the equipment is so defective as to be insufficient to accomplish the purpose for which it is intended, shall be fined not more than $10,000, imprisoned for not more than 5 years or both."

pfl[HiHili il[PH([l pEn[il lylil0lfiBtl||$s|AI itAilTtilt nffßfin ff $ilPPilfi

2.4.11.1

CBIIIIETEJIbCTBOO TIIIIOBOM OAOEPEHI4II ÄJtf CIITHAJII,I3ATOPA

O COAEPIKAHIII{ IIEOTII B CBPOCE (15 ]\{JII-])

CERTIFICATEOF TYPE APPROVAL FOR 15 PPM BILGE ALARM

HacrorrqnM laocmBeprercr, qro crrHatrruarop, Brunoqarcqd lepeqn€neHHoe HrDr€ o6opJEoBamre, [poBepeE n ücr6rraH rcoorBsrcrBr.rr c rpe6oBastnd{ cacrrr 2 nprlr'Ioxelnls x P}'IoloaflBy r rexrllrqecxriM rpe6oBaltrrfl\.! coÄepr€rryMcr B pe3omoqrurI4MO MEPC.107(49). Ha€.rofllee CBnrcr€$srBo AeücrBrrer!üo roERo Är.r! crnürr€aropa, Fa3arrHom rrlDxe.

Thls i. to .ertl$ üat üe 15 ppn bilge alann, onprising the eqüipm@t list€d below, ld bem exmined md rested in &cordaace with rheEqui@mols ofthe sp€cifications contain€d in püt 2 oflhe Amex lo üe Guidelines od Slecincations cmtained in IMO resolution MEIC.107(49)-This Certificaüe is valid only for ihe 15 ppm bilge alm rcftred to below.

CmHa,!ßarop rnna n Molenn oMD-2415 ppm bilge alm ud€r q?e md model desigrDtion

DECKMA EAMBURG GnbH, Gm@r

aHanßarcp coaepßas,ar HeÖnr, r.r3roToaJreHs[ü15 ppm bilge alm oalysing uil mdufactEd by

DECKMA HAMßURG GnbH, Gmatr

no refilrqecKnM ycrro![ri4/c6opoqHoMy qeprexy Neto sp4ificatioddMbly dnwing No.

DH77500, DH79I0O, DH10a1O BL,I+BL3

aara 09.12.n08

3nenpoFryo ceK]m cImam3mpa, xmmMeHE rcelecfonic section of 15 ppm bilge alam mdufactured by

DECKMA ELMBURG GnbE, Gma !

no rexHnqecrua\{ ycnoBr'rr/c6opoqHorry qeprerry l\&üo sp@ifi@tio asenbly dnwing No.

DHn500, DHnl00, DH 108t0 BL.t +BI3

aara 09,12,2004

trys6€€?6€eflirFff6€og-r€f@är€räfir,,4*die€?cs?**sb€rsd+y

no rexHlrqecK ycnoBlnM/cbopomoMy qeprcxy Ne10 sptrifi@tioa/4smbly drawing No.

09.12,2008

W€orsaro€?eipüäeiroißrororreffoF

tro r€*üqocrrM ycrroBrnd/c6opoq{oMy sepl!)ßy.}l!to sp.ciftatiodssq.inbty dnwhg No.

CEEa,lE3aßp ryreMneM am rctrorE:roBaHe{ B coollelsrD}ü c trp.BtrloM 16(5)'Ih. 15 pp'b bile. darm ir .&€pt!ble for usc i! ,coordtrce wilt lwddio! 16(5)

Kollf,r Eacroqero Chraer€JEcrla aolDxEa trocrotmo Eaxo4|I6ot Iü 6olny qaEa, ocxaEetf,om Äarmür clrrHaüßropolrLA copy of lhis Cenitrcsb i! io tc cei.d aboard e vo$el fiüEd wilh this 15 ppm bilge altm tl dl tio.3.

ücxoaGre aamre r pesy,l;IsrLr tcmnrasd rlplDe.a€El 3 ,4otrojl|reEüT$t dd! dd ftsltlß 6th.h.d s Appadix,

Pocciücr(f,iRnsrhtr Msrtdmo

,No.

-t

Pc i4.11.1

-kä#+4

tr E f,ä & iT

CHINA CLASSIFICATION SOCIETY

{aa\ cPlgli orTn

tr HBrorooo32-o2

oMD-24

15 ppm Bilge Alarm analysing unit manufactured by DECKMA Hamburg GmbH

to specification/assembly drawing No. DH10810 page I & 3, date 12.09.2008

DH77500. DH79100

Electronic section of 15 ppm Bilge Alarm manufachrred by DECKMA Hamburg GmbH

to specification/assembly drawing No. DH10810 page I & 3 date 12.09.2008

DH77500, DH79100

The 15 ppm Bilge Alarm is acceptable for use in accordance with Regulation 16 (5).

A copy ofthis Certificate should be carried aboard a vessel fitted with this l5 ppm Bilge Alarm at all times.

Test data and results attached as appendix.

Ofücial stamp

China Classifi cation Society

l bPPMf iä ,R / ( f f i g * H 4 f r t l . t r r lT f iCERTIFICATE OF TYPE APPROVAL FOR 15 PPM BILGE ALARM

This is to certify that the 15 ppm Bilge Alarm, comprising the equipment listed below, has been

examined and tested in accordance with the requirements ofthe specifications contained in part 2 of the

annex to the Guidelines and Specifications contained in IMO resolution MEPC.l07(49).

This Certificate is valid only for the 15 ppm Bilge Alarm referred to below.

l5 ppm Bilge Alarm supplied by

under type and model designation

and incorporating:

*Delete as appropriate.

DECKMA Hamburs GmbH

N9 l o33oe48

. Dated this Oct. 13 day of 20!0

ccs

If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of Det Norske Veritas, then Det Norske Veritas shall pay compensation to such person for his proved direct loss or

damage. However, the compensation shall not exceed an amount equal to ten times the fee charged for the service in question, provided that the maximum compensation shall never exceed USD 2 million. In this provision "Det Norske Veritas" shall mean the Foundation Det Norske Veritas as well as all its subsidiaries, directors, officers, employees, agents and any other acting on behalf of Det Norske Veritas.

DET NORSKE VERITAS AS, Veritasveien 1, NO-1322 Høvik, Norway, Telephone: +47 67 57 99 00, Telefax: +47 67 57 99 11, Org.No. NO 945 748 931 MVA Form No.: 40.91a Issue: January 2008 Page 1 of 1

Order No.: HAM-12-2340A

DET NORSKE VERITAS

STATEMENT

THIS IS TO STATE that the undersigned Surveyor to this Society did – at the request of Messrs.:

Deckma GmbH, Hamburg / Germany

attend their works for the purpose of inspecting and testing the undernoted:

Bilge Alarm Device, Type OMD-24 This is to confirm, that the bilge alarm device type OMD-24 fulfil the requirements of DNV Environmental Class Rules Pt.6 Ch.12 Sec.3 C600 for 5 ppm alarm in connection with class notation “Clean Design”. If required in terms of delivery, the alarm set point of 5 ppm will be presetted by the manufac- turer and a label “Alarm point set to 5 ppm” will be attached on top of the connection box next to the name plate of the unit. Alarm setting can be checked by following the “Instruction Manual Type OMD-24” issued by Deckma. The bilge alarm device OMD-24 complies with relevant regulations of IMO Resolution MEPC. 107 (49) and is certified accordingly, see type approval certificate from Transport Canada, no. CBA2010-02 dated 2010-05-21, and MED module B certificate from See-Berufsgenossenschaft no. 320.031 dated 2009-03-01.

Hamburg, 2012-04-25 W. Adam Senior Surveyor