measuring instrument3.imimg.com/data3/hg/yf/my-3150046/... · digital numeric setting of test...
TRANSCRIPT
MEASURING INSTRUMENT
Capacitance Leakage Current / IR Meter Model IR 2689
Capacitance leakage current test function.
Insulation resistance test function.
Precise low current charge function (0.5mA±0.05mA).
Large current (500mA) improves the charge speed of low voltage large capacitance.
Continoues adjustment of test voltage (1V - 800V).
Comparator function for sorting (PASS/FAIL).
10 groups of status can be saved.
Real time large digital LCD display (240 x 64 dot matrix).
RS 232 and Handler interface.
Features
www.jognics.com
Accessories : Standard 3 terminal test cable
IR 2689
Technical Specification
General Specification
Machine weight : 7.2 kgs Approx.
Parameter LC & IR
Range Auto, Hold.
Trigger mode INT/MAN/EXT.
Sorting
1.0V - 800V.
Test voltage
Test timeFast: 53ms, Med: 70ms, Slow:139ms.Test condition : Range is locked, trigger mode is EXT.
LC- 0 - 999.999mAIR - 0 - 999.999GΩ.
Charge time upper limit 0 - 999s.
Operating Voltage 198 - 242 VAC.
High, Low, Pass with beeper alarm.
Voltage Accuracy ±0.5% set value + 0.2V. £100V, 0.5mA - 500mA.>100V, 0.5mA - Imax, Imax = 50W
Charge current
Test range
Current Accuracy ±3% set value + 0.05mA. LC: 0.001µA - 20mA. IR: 0.01kΩ - 99.99GΩ.
Limit setting
Operating temperature 0°C - 40°C.
www.jognics.com
Note: We reserve the right to modify above specifications at any time. Please confirm your specification before ordering.
MEASURING INSTRUMENT
Automatic Rated Voltage CAP & TAN D Measuring Setwith Power Supply & Jigs
Microprocessor Controlled Measurement.
Precise measurements with electronic tunning of current comparator.
Digital numeric setting of test parameter with memory.
High resolution 7 segment LED display for test Voltage as well as Capacitance deviation range of 20% or 40% for value and 2% or 20% for Tan D with measurement of absolute capacitance value in mfd.
Capacitance Range fro 0.01mfd to 1100mfd.
Digital Handler interface helps for table top or automatic test system usage.
Combination of high accuracy with high speed measurement.
Compact and ergonomic design minimizing floor space and better handling Space.
Features
www.jognics.com
ARVCT
Technical Specification
Test Voltage
Capacitnce Range
Maximum voltage for capacitance range
Test Resolution Reading
50 V - 1000V AC @ 50Hz / 60Hz in steps of 50V steps. Digital Display
0.01 - 1100mfd
100V - 0.01 to 1100mfd
200V - 0.01 to 600mfd
400V - 0.01 to 210mfd
600V - 0.01 to 300mfd
1000V - 0.01 to 120mfd
A). Capacitance
B). Capacitance
A). Tan D
B). Tan D
20% Range : ±0.00% - ±20.00% 2% Range : ±0.000% - ±2.000%
40% Range : ±00.00% - ±40.00% 20% Range : ±0.000% - ±20.00%
Accuracy
Memory
Measuring Time (Electronic Balance)
Pass or Fail Judgement Output
Memory
9 set of front panel settings in memory
With in 1 sec. (Front panel / Remote measurement)
Digital standard / Limit setting through front panel
Output Signal for Pass, High, Low & Tan D Reject. Open Collector (Output Current 8mA Max.)
Power Supply (Optional)
Jigs & Fixture (Optional)
20% Range : ±0.2% + 2 digits 2% Range : ±(0.01% + 2 digit)
40% Range : ±0.5% + 2 digit 20% Range : ±(0.05% + 2 digit)
Power Supply
Jigs & Fixture
Output Current for power supply
Contacts
Voltage Selection
Discharge of Test Capacitor
Dimension
Weight
Air Pressure
Indicators
Voltage Selection
440 V AC, 2 ph, 50Hz. Upto 1kV in 50V steps
Pneumatically operated jigs through a foot switch.
Phosphor Bronze Contacts
Upto 32A for 5 sec, 16A continuous duty max.
Course 200V Steps, Fine 50V Steps
Built in adjustable delay by flow control for discharging capacitor through Test Transformer.
540 mm (W) x 540 mm (L) x 1200 mm (H)
300 Kg. (Approximately)
6 bars.
For Power ON, Voltage ON & Over Load.
1000V - 0.01 to 120mfd only
General Specification
Machine weight : 100 Kgs.(Approx.)
Floor space : 430 mmx 380mm x 199mm (W x L x H) .
Interface (Optional) : Digital Handler Interface is available for triggering and Binning
www.jognics.comNote: We reserve the right to modify above specifications at any time. Please confirm your specification before ordering.
MEASURING INSTRUMENT
Automatic Charge Discharge Tester (5000Amps)
Manual Loading of the Test Capacitor to the Test fixture.
Capacitance Range from 1mfd to 500mfd.
Adjustable Test Voltage through Salzer Switch provided on Front Panel.
Adjustable Current From 100A to 10, 000A.
Adjustable Charge Discharge Time through Text Panel interfaced to PLC.
Monitoring of charge discharge slopes through oscilloscopes output.
Voltage accuracy ±3%
Current Accuracy ±10%
Discharge Through Vacuum Circuit Breaker.
Features
www.jognics.com
Accessories : Standard 2 terminal test cable
Technical Specification
Test Voltage
Voltage Indication
Current
Test Capacitance Range
Charge Time
Discharge Time
No. Of Test Cycles
Digital Counter
Indicators
3½ digit Digital Voltmeter.
600 to 1500 V DC.
100 to 10,000 A.
1 to 500 MFD.
Adjustable 1 to 5 Sec.
Adjustable 0.3 to 1Sec.
Programmable On Digital Counter up to 10,000.
6 Digit Up & Down Counter.
Power ON & OFF, Test Over & Alarm.
General Specification
Power Supply : 230V AC, 50Hz, 1 ph.
Air Supply : 6 bars, Consumption 4 cfm.
www.jognics.com
Floor space : 450 x 465 x 266 mm (W x L x H).
Machine weight : 18Kgs.(Approx.)
Note: We reserve the right to modify above specifications at any time. Please confirm your specification before ordering.
MEASURING INSTRUMENT
Auto Discharge Device Tester Model AD 56
AD - 56, is used to test the discharging efficiency of the power factor capacitors discharging devices.
Digital Voltmeter for test voltage indication.
Digital programmable timer to indicate charging & discharging rate.
System is totally automatic.
Safety features are incorporated (Charge and discharge Current Limiting).
Accept and reject indicators
Short circuit and overload protection.
Selectable Charging rate.
Features
www.jognics.com
Accessories : Standard 2 terminal test cable
AD 56
Technical Specification
General Specification
Floor space : 435 x 400 x 285 mm. (L x W x H)
Machine weight : 30 Kg. (Approximately)
Power supply : 230 V AC, ± 10%, 50 Hz, 500 W
Function Selection Switch
Capacitor Range 1 to 25 KVAR (Can be extending upto 50KVAR)
Timer
Charging Rate Switch Charging rate up to 8x
Set zero, Low limit and High Limit.
Digital timer up to 60 Sec.
Limit setting Knobs Independent Set Zero, Low limit and High Limit.
Indicator Self illuminating Power On switch.
AC Fuse 3A.
Test Voltage Continuously adjustable 100 to 1000 V DC.
Sorting Accept & Reject.
www.jognics.com
Note: We reserve the right to modify above specifications at any time. Please confirm your specification before ordering.
AC/DC Break Down and IR tester Model BD 9201
AC/DC Breakdown tester & insulation resistance tester
240 x 64 dot matrix graphic LCD display
Fast discharge and arc detection function.
Programmable Charging time, measuring time and discharge time for different load
Programmable DC break down voltage current judging time and waiting time.
RS 232 and Handler interface.
Accessories : Standard Voltage withstanding test rodOther accessories on request - Voltage withstanding test cable.
Features
MEASURING INSTRUMENT
www.jognics.com
Technical Specification
Break Down Voltage Test
AC
DCOutput Voltage
Voltage Adjustment
AC
DC
Test AccuracyCurrent test range
Discharge Function
Insulation Resistance Test
0.05kV - 5kV ±(1% of reading + 5 digit) (50Hz, 60Hz optional)
0.05kV - 6kV ±(1% of reading + 5 digit)
£(1.0% + 10V) (rated power)
0.1mA - 20mA
0.01mA - 5mA
±(1% of reading + 5 digit)
Discharge after test ends.
0.05kV - 1kV ±(1.5% of reading + 5V)
Discharge after test ends.
Output Voltage
Discharge Function
Resistance Test Range
Resistance Test Accuracy500V - 1000V
50V - 500V
Measurement Range AC
DC
Arc Detection
General Specification
Voltage rise time
Voltage fall time
Voltage wait time
Interface
Standard
Test time setting
0.1s - 999s
0.1s - 999s
0.1s - 999s(Only for DC)
RS 232, Remote I/O, Scan, Handler
0.3s - 999s
0.1MΩ - 10GΩ (Current Range within 10nA - 10mA)
0.1MΩ - 1GΩ ±(10% of reading + 5 digit)
1mA - 15mA
1mA - 5mA
General Specification
Machine weight : 3.8Kgs.(Approx.)
1M ±(5% of reading + 5 digit)1MΩ - 10GΩ ±(10% of reading + 5 digit)
Ω - 1GΩ
BD 9201
www.jognics.com
Note: We reserve the right to modify above specifications at any time. Please confirm your specification before ordering.
LCR Meter Model LCRZ 2817B
10 Selectable typical frequencies (50Hz to 100kHz).
Three different test levels (0.1Vrms, 0.3Vrms, 1.0Vrms) with continuous indication of the selected frequency, Test Voltage & Parameter.
High accuracy ,Wide measurement range, Easy operation and Perfect functions.
LCD display with white back light.
Strong protection against electrical shock of charged capacitor.
2 selectable source impedance 30Ω/100Ω, easy to be compatible with other LCR meters.
Key lock function.
Out put impedance : 30Ω, 100Ω.
Features
MEASURING INSTRUMENT
www.jognics.com
Accessories - Standard 4 terminal Kelvin test cable.Other accessories on request - 4 terminal test fixture, 4 terminal Kelvin test clip leads and Gilded shorting plate (As shown below).
Technical Specification
Measurement Parameter
Basic Accuracy
Equivalent Circuit
Range Mode
Trigger Mode
Measurement Speed
Calibration Function
Delay Time
Measurement Terminal
Display Mode
[Z] C, L, X, B, R, G, D, Q, q (deg), q (rad)
0.1%.
Series, Parallel.
Auto, Hold Manual.
Internal, Manual, External & BUS
Fast 20 ,Medium 8, Slow 2 (times/sec)(≥ 1kHZ).
Open and Short Sweep Correction
0-60s, with step of 1ms.
5 Terminal.
50Hz,60Hz,100Hz,120Hz,1kHz,10kHz,20kHz,40kHz,50kHz,100Hz.
RS-232C, Handler, GPIB (Optional).
Direct, Delta & ∆%.
Frequency
Interface
Test Level
Comparator Function
Memory
Output Impedance
Operating Frequency
Operating Voltage
Measurement Range
|Z|, R, X
Capacitance (C)
Inductance (L)
Tan Delta (D)
q (DEG)
∆ %
q (RAD)
Q
0.0001Ω - 99.999MΩ.
0.001pf - 9999.9µf.
0.001µH - 99.999kH.
0.0001 - 9.9999.
-179.999° - 179.999°.
999.999% - 999.999%.
-3.14159 - 3.14159.
0.0001 - 99999.
0.1Vrms,0.3Vrms & 1Vrms.
5 Bin sorting (3 Pass bin , 1NG bin) and 1 AUX bin.
10 sets of test parameters saved / loaded.
30Ω, 100Ω.
47.5Hz - 52.5Hz
198 - 242V AC.
General Specification
Machine weight : 4Kgs.(Approx.)
LCRZ 2817B
www.jognics.com
Note: We reserve the right to modify above specifications at any time. Please confirm your specification before ordering.
LCR Meter Model LCRZ 2816B
37 Selectable typical frequencies (50Hz to 200kHz).
Programmable single voltage level from 10mVrms to 2Vrms.
High accuracy ,Wide measurement range, Easy operation and Perfect functions.
240 x 64 dot matrix graphics LCD display, 6 digit resolution.
Strong protection against electrical shock of charged capacitor.
2 selectable source impedance 30Ω/100Ω, easy to be compatible with other LCR meters.
Key lock function.
Accessories - Standard 4 terminal Kelvin test cable.Other accessories on request - 4 terminal test fixture, 4 terminal Kelvin test clip leads and Gilded shorting plate (As shown below).
Features
MEASURING INSTRUMENT
www.jognics.com
LCRZ 2816B
Technical Specification
Measurement Parameter
Basic Accuracy
Equivalent Circuit
Range Mode
Trigger Mode
Measurement Speed
Calibration Function
Delay Time
Measurement Terminal
Display Mode
[Z] C,L,X,B,R,G,D, Q, q (deg), q (rad)
0.1%.
Series, Parallel.
Auto, Hold.
Internal, Manual & External.
Fast 30 ,Medium 10, Slow 1 (Meas/sec)(≥ 1kHZ).
Open and Short
0-60s, with step of 1ms.
5 Terminal.
50Hz,60Hz,100Hz,120Hz,150Hz,200Hz,250Hz,300Hz,400Hz,500Hz,600Hz,800Hz,1kHz,2kHz,2.5kHz 3kHz,4kHz,5kHz,6kHz,8kHz,10kHz,12kHz,15kHz,20kHz,25kHz,30kHz,40kHz,50kHz,60kHz,80kHz,100Hz,20kHz,150kHz,200kHz.
RS-232C, Handler.
Direct, ΔABS, Δ%, V/I(V/I Monitor), Bin No & Bin Counter
Frequency
Interface
Test Level
Comparator Function
Memory
Output Impedance
Operating Frequency
Operating Voltage
Measurement Range
|Z|, R, X
Capacitance (C)
Inductance (L)
Tan Delta (D)
G,B
q (DEG)
∆ %
q (RAD)
Q
0.00001Ω - 99.9999MΩ.
0.00001pf - 999.999mf.
0.00001µH - 9.99999kH.
0.00001 - 9.99999.
0.00001μS - 999.999S.
-179.999° - 179.999°.
999.999% - 999.999%.
-3.14159 - 3.14159.
0.00001 - 99999.9.
10mVrms-2Vrms,10mv steps.
Comparator Function
12 Batches can be stored or recalled.
30Ω, 100Ω.
47.5Hz - 52.5Hz
198 - 242V AC.
General Specification
Machine weight : 4Kgs.(Approx.)
Floor space : 350 (W) x 340 (L) x 110 (H) mm.
www.jognics.com
Note: We reserve the right to modify above specifications at any time. Please confirm your specification before ordering.
Portable LCR Meter
Features
MEASURING INSTRUMENT
www.jognics.com
Three selectable typical frequencies (100Hz, 120Hz & 1 KHz)
Portable LCR meter with large LCD display
Auto power off function
Battery & external power supply
Open & short correction
Accessories - Standard 4-terminal Kelvin test cable
Technical Specification
Measurement Parameter
Basic Accuracy
Equivalent Circuit
Range Mode
Measurement Speed
Calibration Function
Measurement Terminal
Display Mode
C-D, R-Q, L-Q, |Z|-Q
0.3%.
Series, Parallel.
Auto, Hold.
~3meas/sec
Open/Short Correction.
5 Terminal.
100Hz,120Hz & 1kHz
Direct
Frequency
Measurement Range
|Z|, R
Capacitance (C) @ 100Hz & 120Hz.
Capacitance (C) @ 1kHz.
Inductance (L) @ 100Hz & 120Hz
Inductance (L) @ 1kHz
Tan Delta (D)
Q
0.0001Ω - 9.999MΩ.
1pf - 9999µf.
0.1pf - 999.9µf.
1µH - 9999H.
0.1µH - 999.9H.
0.0001 - 9.999.
0.0001 - 9999.
General Specification
www.jognics.com
Machine weight : 400 Kg. (Approximately)
Power supply : Battery 1604, 9V or Adaptor 12V DC, 150mA
Note: We reserve the right to modify above specifications at any time. Please confirm your specification before ordering.
MEASURING INSTRUMENT
Capacitance Meter Model CR 2012
Four Selectable typical frequencies (100Hz to 10kHz).
Three different test levels (0.1V, 0.3V, 1.0V) with continuous indication of the selected frequency, Test voltage & Parameter.
High accuracy , Wide measurement range, Easy operation and Perfect functions.
Programable 5 bin sorting facility.
Strong protection against electrical shock of charged capacitor.
LCD display for measurement results and test conditions.
Out put impedances : 30Ω, 100Ω.
Features
www.jognics.com
Accessories - Standard 4 terminal Kelvin test cable.Other accessories on request - 4 terminal test fixture, 4 terminal Kelvin test clip leads and Gilded shorting plate (As shown below).
CR 2012
Technical Specification
Primary Measurement Parameter
Secondary Measurement Parameter
Basic Accuracy
Equivalent Circuit
Range Mode
Trigger Mode
Measurement Speed
Calibration Function
Measurement Terminal
Display Mode
C: Capacitance R: Resistance|Z|:Absolute value of impedance
D: Dissipation θ: Phase angleX : ReactanceESR: Series equivalent resistance
0.1%.
Series, Parallel.
Auto, Hold.
Internal, Manual, External, DUT & BUS.
FAST : 20 meas/sec, MED : 7meas/sec, SLOW : 3 meas/sec
Open/Short Sweep Correction.
4 Terminal.
100Hz,120Hz,1kHz,10kHz.
RS-232C, Handler.
Direct, ∆ Absolute, ∆%.
Frequency
Interface
Test Level
Operating Frequency
Measurement Range
R & Z
Capacitance (C)
Tan Delta (D)
Q
0.1mΩ to 99.9MΩ
100Hz,120Hz - 1pF to 99999μF1kHz - 0.1pF to 99999μF10kHz - 0.01pF to 99999μF
0.0001 to 9.9999
0.0001 to 99999
0.1Vrms,0.3Vrms & 1Vrms.
47.5Hz - 63Hz.
General Specification
Machine weight
Dimension
: 3.5 Kgs.(Approx.)
: 310mm(W) x 105mm (H) x 295mm (L)
www.jognics.comNote: We reserve the right to modify above specifications at any time. Please confirm your specification before ordering.
Precision LCR Meter Model LCR 2013
Four different parameters displayed simultaneously with flexible and comfirtable combination.
Both AC & DC parameters can be measured simultaneously without any interference.
High precision, Wide measurement range with six digit resolution, Easy operation and Perfect functions.
Can be used for incoming inspection of components, quality control and laboratory use with wide frequency from 20Hz to 200KHz.
Powerful list sweep function, wherein different parameters and excitation sources can be mixed sweep test and displayed.
Strong protection against electrical shock of charged capacitor.
Built in continuous DC biasL -5V to +5V
Independent and ow noise DC source : -10V to +10V continuously adjustable with resolution 2.5mV.
RS232C, GPIB, Handler interfaces and perfect command system.
Features
MEASURING INSTRUMENT
www.jognics.com
Accessories - Standard 4 terminal Kelvin test cable.Other accessories on request - 4 terminal test fixture, 4 terminal Kelvin test clip leads and Gilded shorting plate (As shown below).
LCR 2013
Technical Specification
Measurement Parameter
Basic Accuracy
Equivalent Circuit
Range Mode
Trigger Mode
Measurement Speed
Calibration Function
List Sweep
Graphics Scanning Function
|Z|, C, L, R, X, |Y|, B, G, D, Q, q, DCR
0.05%.
Series, Parallel.
Auto, Hold.
Internal, Manual, DUT, External & BUS
Fast 65 , Medium 10, Slow 5 (meas/sec).
Open/Short/Load, Full Frequency Correction, 64 points frequency correction.
20 points frequency, level, DC bias, DC source
20 Hz to 200KHz with resolution 1mHz.
RS-232C/USB HOST/Handler
Frequency, Level, Bias voltage/Current, DC source
Frequency
Interface
Test Level
Comparator
Output DC Source
Internal DC Bias
Operating Frequency
Operating Voltage
Measurement Range
|Z|, R, X
|Y|, G, B
Capacitance (C)
Inductance (L)
Tan Delta (D)
q (Deg)
q (Rad)
∆ %
Q
DCR
0.01mΩ - 99.9999MΩ.
0.0001mS - 999.999S.
0.00001pf - 99.9999mf.
0.00001µH - 99.9999kH.
0.00001 - 9.99999.
-179.9° - 179.9°
-3.14159 - 3.14159
-999.99% - 999.99%.
0.01 - 99999.9.
1mΩ - 99.9999MΩ
10mV to 2V with resolution 1mV, 100mA to 100mA with resolution 1mA
10 bins, BIN0-BIN9, NG, AUX. PASS/FAIL LED display.
-10V - +10V, Resolution - 2.5mV
Voltage Mode -5V - +5V, Resolution - 1mV
Current Mode -50mA - 50mA, Resolution - 20mA
47.5Hz - 63Hz.
99V - 242V AC.
General Specification
www.jognics.com
Dimension : 350 x 120 x 360 mm. (W x H x D)
Machine weight : 3.5 Kg. (Approximately)
Note: We reserve the right to modify above specifications at any time. Please confirm your specification before ordering.