metalworks - armstrong world industries€¦ · metalworks ™ blades – classics ; south by...

METALWORKS™

Blades Classics

Design Guide

-

™

2

More Options = More Designs

The durability of metal with design options using standard or custom panel lengths and finishes, limited only by imagination.

Acoustics and aesthetics for hundreds of creative layouts

Blades panel lengths range from 22-1/2" to 96"

Standard blade sizes in multiple lengths with 4" depths and 1" widths or 6" depths with 1" or 2" widths

Three standard colors, six Effects™ Wood Looks finishes

MetalWorks™ Blades – Classics™ panels are part of the Sustain™ portfolio (unperforated panels only)

Installs on standard Prelude® XL® 15/16" or 360° Painted suspension system

MetalWorks™ Blades – Classics™ 2" x 6" panels in Effects™ Cherry

Create a memorable

VISUAL

4

MetalWorks™ Blades – Classics™; South by Southwest Headquarters, Austin, TX

5

Classic Doesn’t MeanORDINARY.Express a new narrative with MetalWorks™ Blades – Classics™ linear panels. From divergent drama to striated stories; from sunflowers to sunbursts, create a look to visually tell your tale with the classic product that will spark your imagination. Turn the page for layouts that will inspire your linear prose.

6

METALWORKS™ Blades – Classics™

1' x 4' Grid Layouts

Divergent PatternSHOWN WITH:

22-1/2 x 1 x 6" panels 46-1/2 x 1 x 6" panels 96 x 1 x 6" panels

Striated PatternSHOWN WITH:

22-1/2", 46-1/2", and 96" length panels in varying widths and depths of 1" x 4", 1" x 6" and 2" x 6"

View Ceiling Plan Drawing >


https://www.armstrongceilings.com/commercial/en-us/commercial-ceilings-walls/metalworks-blades-classics-ceilings/resources.html


7

DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:

ARMSTRONG CEILING SOLUTIONS * Lancaster, PA * Phone: 877-ARMSTRONG

Armstrong is not licensed to provide professional architecture or engineering design services.

These drawings show typical conditions in which the Armstrong product depicted is installed.They are not a substitute for an architect's or engineer's plan and do not reflect the unique requirements oflocal building codes,laws,statutes,ordinances,rules and regulations (Legal Requirements) that may beapplicable for a particular installation. Armstrong Ceiling Solutions does not warrant, and assumes no liability for the accuracy or completeness of the drawings for a particular installation or their fitness for a particular purpose.The user is advised to consult with a duly licensed architect or engineer in the particular locale of the installation to assure compliance with all Legal Requirements.

R

-NJFriez

3/15/2017

213745-03 1X4 2FT_4FT_SunFlower.dwg

1 : 40

- -

1x4 2Ft 4Ft Sun Flower

MetalWorks Blades Classics

DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:




R

-NJFriez

3/15/2017

213745-04 1X4 2FT_Arrows.dwg

1 : 40

- -

1x4 2FT Arrows



1' x 4' Grid Layouts

SunFlower PatternSHOWN WITH:

22-1/2 x 1 x 4" panels 46-1/2 x 1 x 4" panels

Arrows PatternSHOWN WITH:

22-1/2 x 1 x 4" panels



https://www.armstrongceilings.com/static/assets/commceilingsna/cadrevit/213745-04%201X4%202FT_Arrows.pdf

https://www.armstrongceilings.com/static/assets/commceilingsna/cadrevit/213745-03%201X4%202FT_4FT_SunFlower.pdf

8


2' x 2' Layouts

Open Cell PatternSHOWN WITH: 22-1/2 x 1 x 6" panels

90 Degree PatternSHOWN WITH: 96 x 1 x 6" panels





9


2' x 4' Layouts

Diagonal Layered 45 Degree PatternSHOWN WITH: 46-1/2 x 1 x 4" panels

Herringbone PatternSHOWN WITH: 46-1/2 x 1 x 6" panels



DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:




R

-NJFriez

3/15/2017

213745-11 2X4 4FT_HarringBone.dwg

1 : 40

- -

2x4 4FT Harring Bone



https://www.armstrongceilings.com/static/assets/commceilingsna/cadrevit/213745-10%202X4%204FT_Diagonal%20Layered%2045%20Degree.pdf

10


4' x 4' Layouts

8 Ft Staggered PatternSHOWN WITH:

96 x 2 x 6" panels

8 Ft Diagonal 10 Degree PatternSHOWN WITH:

96 x 2 x 6" panels





11

DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:




R

-NJFriez

3/15/2017

213745-18 4X4 8FT_Wave 5 Degree.dwg

1 : 40

- -

4x4 8FT Wave 5 Degree



4' x 4' Layouts

8 Ft Wave 5 Degree PatternSHOWN WITH:

96 x 1 x 4" panels

8 Ft Wave Cross 10 Degree PatternSHOWN WITH:

96 x 1 x 6" panels




https://www.armstrongceilings.com/static/assets/commceilingsna/cadrevit/213745-18%204X4%208FT_Wave%205%20Degree.pdf

12

DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:




R

-NJFriez

3/15/2017

213745-22 4X4 8FT_X Triple Cross 5 Degree.dwg

1 : 40

- -

4x4 8FT X Triple Cross 5 Degree



4' x 4' Layouts

8 Ft Cross 5 Degree PatternSHOWN WITH:

96 x 2 x 6" panels

8 Ft Triple Cross 5 Degree PatternSHOWN WITH:

96 x 1 x 4" panels



https://www.armstrongceilings.com/static/assets/commceilingsna/cadrevit/213745-22%204X4%208FT_X%20Triple%20Cross%205%20Degree.pdf


13

Design Considerations:All designs shown require only two clips per panel positioned at least 4" from the end of each linear panel.

All designs shown are possible using intermediate duty suspension system.

For more information visit our website at armstrongceilings.com/blades or call 1 877 276 7876Custom Capabilities – custom install with variable module grid layout. Call TechLine at 1 877 276 7876


Variable Module: Grid Layout Based on Your Personal Design

Sunburst PatternSHOWN WITH:

22-1/2 x 1 x 6" panels 46-1/2 x 1 x 6" panels 96 x 1 x 6" panels

View Ceiling Plan Drawings >




14 TechLine 877 276-7876

armstrongceilings.com/metalworks


Linear Panels with Acoustical Optionssmooth texture

KEY SELECTION ATTRIBUTES• New standard blade sizes in multiple lengths with either:

- 4" depth and 1" width - 6" depth with 1" or 2" widths• Premium blade sizes available:

- Lengths up to 96" - Depths up to 8" - Widths 1" or 2"• Available in 22 1/2", 46 1/2", 94 1/2", and 96"

lengths for creative design layouts• Blade panels available with either two factory-installed

end caps, one end cap, or no end caps• MetalWorks™ Blades – Classics™ panels are part of the

Sustain™ portfolio (unperforated panels only)

• Now able to cut panels at the job site - use Field Cut End Cap for a clean finish

• Available in six Effects™ Wood Looks finishes• Excellent acoustical performance; up to

4.20 Sabins per panel• Create acoustical or non-acoustical upscale

linear designs• Blades panel spacing is variable to accommodate

a variety of design and acoustical needs• Fast, easy installation with standard Prelude® XL®

15/16" or 360° painted suspension systems

Durable metal vertical panels in upscale linear designs are available in acoustical or non-acoustical options.

MetalWorks™ Blades – Classics™

panel

Attachment Clip

Main Beam

116 " ROUND

PERFORATION-

532 " DIAGONAL

CENTERS-

12% OPEN AREA

STD-002D

12% OPEN AREA

932 " [0.281"]

MINIMUMUNPERFORATED

BORDER

45˚

ø 1/

16"

[0.0

63"]

7/32

"[0

.226

"]

7/32"[0.226"] 5/32"

[0.160"]PERFORATION OPTIONS (1:2 scale shown)

M15 (Rd 1612)

M1(Unperforated)

Effects™ Maple (FXMP)

Effects Cherry (FXCH)

Effects Oak (FXOK)

Effects Dark Cherry (FXDC)

Custom Colors Available

Effects Walnut (FXWN)

Effects Walnut Espresso (FXWE)

Field Cut End Cap shown inserted and uninstalled.

Additional sizes and colors may be available. For more information contact Architectural Specialties TechLine at 1 877 276-7876 or [email protected] for a quote.

CAD/Revit® drawings at: armstrongceilings.com

Whitelume (WHA)

Gun Metal(MYA)

Silverlume (SIA)

Part of the Sustain™ portfolio, meeting sustainability compliance standards (M1– unperforated panels only)

COLORS Due to printing limitations, shade may vary from actual product.

armstrongceilings.com/capabilitiesSee more photos at:armstrongceilings.com/photogallery

to do moreplus capabilities

new

new

MetalWorks™ Blades – Classics™ in 48" and 96" lengths in Effects™ Cherry.

15


Linear Panels with Acoustical Optionssmooth texture

VISUAL SELECTION PERFORMANCE

For products with 2 end caps, minimum gap from panel to panel will be 1/4". 96" panels without end caps can be spliced together with Alignment device.

Seismic Restraint MetalWorks™ Blades – Classics™ are approved for application in all seismic areas when installed per the seismic guidelines in the Armstrong Ceilings installation instructions.

Warranty Details at armstrongceilings.com

Weight D41 panels: 0.50 lbs/LF D61 panels: 0.61 lbs/LF D62 panels: 0.68 lbs/LF

PHYSICAL DATAMaterial Aluminum – thickness 0.032"

Surface Finish Factory-applied polyester paint. Available in Whitelume, Silverlume, Gun Metal, and Effects™ Wood Looks powder-coated, post-production finishes. Custom colors also available. Contact TechLine for custom color matching requests at 1 877 276-7876.

Fire Performance Tested per ASTM E84. Flame Spread Index 25 or less. Smoke Developed Index 50 or less.

CAN/ULC S102 surface burning characteristics. Flame Spread Rating 25 or less. Smoke Developed Classification 50 or less.

Acoustical Options Perforated panels are supplied with a black fiberglass fleece acoustic infill bag to absorb sound (varies by Blades panel length, width, and depth).

Design Support Project assistance is available by calling TechLine customer support at 1 877 276-7876.

Design Considerations When installed, panels hang either 4-7/8" or 6-7/8" below grid face. Panels can be supported by intermediate duty main beams or cross tees, with 2 attachment clips per panel. See MetalWorks™ Blades – Classics™ design guide online for additional design layouts. MetalWorks Blades – Classics can be cut in the field only when using the Field Cut End Cap. See installation instructions for details.

Edge Profile

Item No. ◆

Description/Dimensions L x W x D (Inches) Custom Sizes Available

Sabi

ns p

er

Pane

l

Was

h

Scru

b

Soil

METALWORKS™ Blades – Classics™ Durability

8157D41_ _ _ _ _ _ _ 8157D61_ _ _ _ _ _ _ 8157D62_ _ _ _ _ _ _

Vertical panel with caps on both ends 94 -1/2 x 1 x 4" 94 -1/2 x 1 x 6" 94 -1/2 x 2 x 6"

2.47 3.35 4.13

• • •

8156D41_ _ _ _ _ _ _ 8156D61_ _ _ _ _ _ _ 8156D62_ _ _ _ _ _ _


1.21 1.65 2.03

• • •

8155D41_ _ _ _ _ _ _ 8155D61_ _ _ _ _ _ _ 8155D62_ _ _ _ _ _ _


0.59 0.80 0.98

• • •

7202D41_ _ _ _ _ _ _ 7202D61_ _ _ _ _ _ _ 7202D62_ _ _ _ _ _ _

Vertical panel with cap on one end 96 x 1 x 4" 96 x 1 x 6" 96 x 2 x 6"

2.51 3.40 4.20

• • •

7203D41_ _ _ _ _ _ _ 7203D61_ _ _ _ _ _ _ 7203D62_ _ _ _ _ _ _

Vertical panel with no end caps 96 x 1 x 4" 96 x 1 x 6" 96 x 2 x 6"

2.51 3.40 4.20

• • •

◆ When specifying or ordering, include the appropriate perforation and color suffix with the item number (e.g., 8157D41 M 1 5 F X M P). † With M15 perforation

Dots represent high level of performance.

SUSPENSION SYSTEMS

15/16"

Prelude® XL® suspension system (Black) or 360º Painted Grid

Item Number

Description

Pieces/Carton

7204 _ _ ◆◆

MetalWorks™ Blades – Classics™ Attachment Clip (SS – Stainless Steel and KO – Black Oxide)

100

7205D41 7205D61 7205D62

MetalWorks™ Blades – Classics™

1" x 4" Alignment Device 1" x 6" Alignment Device 2" x 6" Alignment Device

24

8158D41_ _ _ _ ◆

8158D61_ _ _ _ 8158D62_ _ _ _

MetalWorks™ Blades – Classics™ 1" x 4" Field Cut End Cap 1" x 6" Field Cut End Cap 2" x 6" Field Cut End Cap

10

◆ When specifying or ordering, include the color suffix with the item number (e.g., 8158D61 F X M P ). ◆◆When specifying or ordering, include the appropriate 2-letter color suffix,

SS – Stainless Steel or KO – Black Oxide, (e.g., 7204 S S).

ACCESSORIES

New blade panel sizes allow for maximum design flexibility. See other possible design layouts in our MetalWorks™ Blades design guide.

▲ ▲ LOCATION DEPENDENT WITH INFILL PANEL

RECYCLED CONTENT

LEED

®

ener

gy

man

agem

ent

recy

clab

le/

exte

nded

pr

oduc

er r

esp.

mat

eria

l in

gred

ient

re

port

ing

recy

cled

co

nten

tso

urci

ng o

f ra

w m

ater

ials

low

em

ittin

g/

mat

eria

ls

light

ing

qu

alit

y

biob

ased

m

ater

ials

regi

onal

m

ater

ials

desi

gn fo

r fle

xibi

lity

cons

truc

tion

was

te m

gmt

EPD

acou

stic

s

80%UP

TO

For LEED contribution contact TechLine

Living Building Challenge Compliant

DeclareSM High Performance Sustainable

Ceiling Systems Unperforated (M1)

1x4 FRONT VIEW

2x6 FRONT VIEW

1x6 FRONT VIEW

6-7/8"

6-7/8"

4-7/8"

1x4 FRONT VIEW

2x6 FRONT VIEW

1x6 FRONT VIEW

6-7/8"

6-7/8"

4-7/8"

1x4 FRONT VIEW

2x6 FRONT VIEW

1x6 FRONT VIEW

6-7/8"

6-7/8"

4-7/8"

1x4 FRONT VIEW

2x6 FRONT VIEW

1x6 FRONT VIEW

6-7/8"

6-7/8"

4-7/8"

1x4 FRONT VIEW

2x6 FRONT VIEW

1x6 FRONT VIEW

6-7/8"

6-7/8"

4-7/8"

1x4 FRONT VIEW

2x6 FRONT VIEW

1x6 FRONT VIEW

6-7/8"

6-7/8"

4-7/8"

TAKE THE NEXT

STEP

armstrongceilings.com/blades

BPCS-5580-620

Revit® Is a registered trademark of Autodesk, Inc.; SketchUp® is a registered trademark of Trimble Inc.; DeclareSM is a service mark of International Living Future Institute; LEED® is a registered trademark of the U.S. Green Building Council; Inspiring Great Spaces® is a registered trademark of AFI Licensing LLC All other trademarks used herein are the property of AWI Licensing LLC and/or its affiliates © 2020 AWI Licensing LLC Printed in the United States of America

1 877 276 7876

Customer Service Representatives

7:45 a.m. to 5:00 p.m. EST

Monday through Friday

TechLine – Technical information, detail drawings,

CAD design assistance, installation information,

other technical services – 8:00 a.m. to 5:30 p.m. EST,

Monday through Friday. 877-276-7876

or email: [email protected]

armstrongceilings.com/commercial

Latest product news

Standard and custom product information

Online catalog

CAD, Revit®, SketchUp® files

A Ceiling for Every Space® Visual Selection Tool

Product literature and samples – express service

or regular delivery

Contacts – reps, where to buy, who will install

YOU INSPIRE™ SOLUTIONS CENTER

email: [email protected] armstrongceilings.com/youinspire

Design Assistance

Collaborative design

Detail drawings

Specifications

Planning and budgeting

Pre-construction Assistance

Layout drawings for standard

and premium products

Project installation recommendations

Contractor installation assistance

helping to bring your one-of-a-kind ideas to life

metalworks - armstrong world industries€¦ · metalworks ™ blades – classics ; south by...

Documents