MICHELIN TRUCK TYRES

ON/OFF ROAD

MICHELIN X ® Works™ XZY All round fi tment

M+S marking

MICHELIN X ® Works™ XDYDrive axleM+S marking

Versatility of use On roads, in and around

worksites and quarries

Dimensions 315/80 R 22.5 156/150 K 13 R 22.5 156/150 K Available soon: 12 R 22.5 295/80 R 22.5 (XZY)

Robustness for the worksite and endurance for the road.

“Reduce risks with a tyre guarantee”

MICHELIN X® WORKS™ XZYRegrooving pattern

Regroovable and soon to be retreadable as a

MICHELIN X® WORKS™ XDYRegrooving pattern

Regroovable and soon to be retreadable as a

For more information please visit: www.michelintransport.com

RCS

Lyon

B 4

00 4

89 1

42 -

Phot

o Cr

edits

: G

etty

Imag

es, T

ouch

e Pa

rtic

uliè

re, M

iche

lin -

Sept

embe

r 201

1

For each MICHELIN X® Works TM tyre purchased, Michelin offer a guarantee against accidental tyre damage covering the fi rst six months of use.

You can then therefore benefi t from the durability and safety of your new MICHELIN X® Works TM tyres

* Refer to the general terms and conditions at www.michelintransport.com.

Regroove depth:Approximate

regroove width: Suggested blade:

H = 4 mm 8 to 10 mm R3

X ® Works™ XZY X ® Works™ XDY4 grooves: 315/80 R 22.5

3 grooves: 13 R 22.5

Regroove depth:Approximate

regroove width:Suggested blade:

H = 4 mm 6 to 8 mm R3

Michelin Truck Tyre Guarantee*

X Works 4pp fiche UK.indd 1-2 06/10/2011 11:04:23

“Reduce risks with a tyre guarantee”

2 3

More economical

Improved resistance to accidental damage* • Architecture optimised for challenging conditions

of use. • New robust tread with improved resistance to tread tearing. • Reinforced shoulder area has improved resistance to

lateral impact damage.

Improved mileage potential* • New MICHELIN X® Works™ casing with a higher

density of metallic casing cables for greater casing endurance. The tyre has an improved mileage potential and the casing is designed to be retreaded several times.

• Crown architecture designed for an optimised contact patch with an improved wear pattern, resulting in improved mileage potential.

• Compact central tread blocks for improved resistance to tread tearing, leading to extended tyre life.

More environmentally friendly

A tyre designed to be retreaded several times • Manufactured in Michelin factories to the same quality

requirements as a new tyre, the MICHELIN X® Works™ Remix tyres offer you similar levels of performance to new MICHELIN X® Works™ tyres, whilst using 50kg less material.

A tyre designed to be regrooved • To extend mileage potential and therefore tyre life. • Enables the use of the tyre for longer in its most fuel effi cient state.

Safer

Improved handling on and off road • Wider tread grooves for improved grip on wet road surfaces. • Tread groove design optimised to improve self

cleaning properties.

30%** less stone retention • MICHELIN X® Works™ XZY: protective ridges in the

base of the tread grooves. • MICHELIN X® Works™ XDY: V shaped tread grooves

vary in width and pitch.

MICHELIN X® Works™ higher density of metallic casing cables*

* Compared to XZY2/XDY3 in the same dimension.** Internal Michelin test data vs MICHELIN XDY3. * Internal Michelin test data vs MICHELIN XZY2.

Larger metallic protection ply improves protection

against penetration

New rubber compound offering improved resistance to accidental damage

3 wider metallic reinforcing plies

improves resistance to accidental damage*

Reinforced shoulder areaimproves resistance to lateral impact damage

Improved resistance todamage at the base of the tread groove

Protective ridges in the base of the grooves improve self-cleaningproperties

V Shaped tread grooves vary in

width and pitch

Chamfered tread block design to reduce tread tearing

Angled grooves reduce tread tearing when driving over obstacles

Compact central tread blocks to improve resistance to tread tearing

Improved resistance to accidental damage*

More effi cient water and mud dispersion

Reduced stone retention*

315/80 R 22.5

X Works 4pp fiche UK.indd 3-4 06/10/2011 11:05:27