minimum distance sampling insite rf data …mti-ltd.com/85931/pdf/insite-brochure_revb_final.pdfgsm,...
TRANSCRIPT
Easy to use and friendly Graphical User InterfaceNew Indoor Mapping capabilityDisplays Scanner Measurements
- GSM: RSSI Wide, RSSI Narrow, Spectrum Analysis, Control Channel Color Code (BSIC, C/I)
- WCDMA: RSSI Wide, RSSI Narrow, Spectrum Analysis, Pilot, Top N Pilot, Timeslot
- CDMA2000: RSSI Wide, RSSI Narrow, Spectrum Analysis, Pilot, Top N Pilot, Code Domain
Provides ability to perform RSSI channel scans and DBS measurementsHardware Auto Detection makes installation and set up easyProvides logging options and audio alarms settings
Simplifying Wireless Intelligence…CERTIFIEDISO 9001:2000
DTI, a PCTEL Company
DTI, a PCTEL Company
12810 Wisteria Drive, Germantown, MD 20874 USA301.515.0036 voice 301.515.0037 fax
www.DynamicTelecommunications.comSpecification Subject to Change Without Notice.
Specifications*
Frequency BandsSingle-Bands: 800MHz, 900MHz, 1800MHz, 1900MHz, and 2100MHzDual-Bands: 800/1900 MHz and 900/1800 MHz
ProtocolsGSM, CDMA2000 or WCDMA
Scanning SpeedUp to 500 Channels/second
Basic Accuracy± 1.0 dB typical
Frequency Accuracy± 0.05 ppm GPS Locked± 0.2 ppm GPS Unlocked
Operating RF Input Signal Range-120 dBm to -15 dBm
Input PowerReceiver: +8 to +16 VDC (Negative
Ground), 1.0A Max @ 12 VDCDRS: 10.5 - 16.5 VDC, 2.4 W
SizeReceiver: 6.5” x 5.25” x 1.375”DRS: 2.1” diameter, under 5” long
WeightReceiver: Less than 3 lbsDRS: 0.5 lb
Features of InSite LX Software
Ordering Information
For Ordering Information Please Contact DTI Sales at +1.301.515.0036
InSiteTM RF Data Collection System…
Rev B
April 2004
InSiteTM RF Data Collection System
Hardware (Receiver and DRS)
Software (InSite LX)
Operating SystemWindows 2000
Scanner supportSeeGull LX single or dual bands
DTI is a leading supplier of high-speed, multi-standard receivers as well as test and measurement solutions to the Wireless Industry Worldwide.
Founded in 1995, DTI maintains its world headquarters in the technology corridor located in Germantown, Maryland, on the USA’s East Coast. DTI was acquired in March of 2003 by PCTEL, a leading provider of innovative and cost-effective Internet access solutions and 802.11 mobility software.
DTI is recognized for World-class speed and quality that helps our customers thrive in a competitive environment.
Wireless Solutions
• Interference & Propagation Measurements
• Data Collection Systems• Scanning Receivers• Transmitters• Market Analysis• Base Station Monitoring• Custom & OEM Solutions
Wireless Applications
• Network Optimization• Co-channel Interference• Indoor Test & Measurement• Coverage Testing
Version 2.0
PRELIMINARY
Notes: * See scanner datasheets for more specifications
Minimum Distance Sampling 10 cm on one Channel @60 MPH
Wire
less
Driv
e Te
st S
olut
ions
…
Provides a Propagation Tool, Drive-Test Scanner and Spectrum Analyzer all in one Solution
Portable and easy to install
High performance fast scanning receivers
Reliable tool with accurate and precise measurements
Fully integrated test system provides ease of use
User friendly and intuitive graphical user interface
Dynamic Telecommunication (DTI)’s InSiteTM RF Data Collection System is a cost-effective and user friendly approach to collecting and displaying drive test data for deployment and optimization of wireless networks. The InSiteTM
System helps wireless operators to meet their network coverage, capacity, and quality goals.
DTI’s InSiteTM RF Data Collection System is used throughout the network lifecycle, from initial deployment to ongoing testing and optimization, in areas such as:
• Drive Test and Measurements• Site Surveys• Model Tuning• Base Station Monitoring• Demodulating RF Signals• Analyzing Wireless Network Data
DTI’s InSiteTM RF Data Collection System includes:
• InSite LX software• 1 to 8 SeeGullTM LX receivers
(GSM, WCDMA, or CDMA2000)• Doppler Radar Sensor (DRS)• Laptop (option)• Cables and Accessories
Benefits…
InSiteTM RF Data Collection System
Network Deployment
DTI, a PCTEL Company
Network Optimization
Challenge:
Determining whether or not a site meets its coverage, capacity, and quality objectives successfully.
Challenge:
Minimizing cost of deploying cellular networks and working with the inherent limitations of predicated data.
Solution:
Performing drive tests and collecting measured data about the network in question. The drive test data is very valuable for site evaluation and model calibration.
Measures GSM, CDMA2000 and WCDMA signals
Dual-Band Collection Capability
Supports Lee Criteria and Distance Based CW Measurements
Built-in Spectrum Analysis
RSSI, Pilot (PN), Top N, and TimeSlot Measurements
Internal GPS
Indoor mapping
Hardware auto-detection
Features…
Solution:
Performing drive testing to collect data that is used in comparison with predicted data to assess coverage consistency and verify that site performance goals are met.
Applications…Overview…
Doppler Radar Sensor
SeeGullTM LX High-Speed Scanning Receiver
• As a Drive Testing tool, the InSiteTM System measures and displays highly accurate and reliable RF data that are used to identify network problems and why they occurred
• As a Propagation Testing solution, the InSiteTM System provides propagation data for analysis of network coverage
• As a Model Tuning tool, the InSiteTM System collects data under Lee’s sampling criteria which improves the reliability of estimating signal levels
• The InSiteTM System also serves as a Spectrum Analysis tool that measures and reports power spectral density
• Network Deployment involves the processes of site evaluation and acceptance testing (Figure to the right)
• Performing drive testing with an InSiteTM RF Data Collection System helps to shorten a network’s turn-up time, optimize its performance, and improve its quality
• Accurate RF Data is used for an effective site survey that saves both time and money
• Distance Based feature (with DRS) fine-tunes prediction data
Drive testing with the InSiteTM System addresses the entire network evolution cycle
InSiteTM RF Data Collection System