Model 17430-Series

Mo

de

l 17

43

0-S

erie

s

SELF-PRIMING PUMPS FEATURES

Body: Glass-Filled Epoxy

Impeller: Neoprene, Nitrile or Viton*

Shaft Seal: Mechanical, Carbon-on-Ceramic,Nitrile

Ports: 1/2" N.P.T. Internal

Shaft: Corrosion Resistant Steel with EpoxyDrive Sleeve in Contact with Fluid

Motor: 115V AC, 1ø, 60 Hz, 1/2 HP, 1725RPM, TEFC, Overload Protected,Capacitor Start, Three-prongedGrounded Plug

Weight: 33-1/2 lb (15.3 kg)

VARIATIONS AVAILABLE

MODEL NO. DESCRIPTION

17430-0003 Nitrite Impeller17430-0004 Viton Impeller, Seal and O-Ring

APPLICATIONDesigned for transfers, circulation, spill returns, filtrationand filling line use. Easily handles pure solutions, foaming liquids, emulsions, suspended solids, gels andmetallic contamination, it is widely used for pumpingphoto chemicals, plating compounds, lab solutions,pharmaceuticals, cosmetics, weak acids, alkalize, liquidfertilizers, insecticides, dyes, detergents, waxes andmany more. There is no pump metal part in contact withthe fluid. Refer to the JABSCO Chemical ResistanceGuide.

* Viton is a registered trademark of Du Pont Elastomers L.L.C.

WARNING! Explosion hazard. Do not use where flammable vapors

are present. Do not pump gasoline, solvents, thinners or other flammable liquids. To do so can cause an explosion resulting in injury or death.

12/02

005 Size Flexible Impeller AC Motor Pump Unit

0

2

4

6

8

10

12

14

16

18

20

22

24

26

0 0.5 1 1.5 2 2.5 3 3.5 4 4.5

PerformanceParts List

Dimensions in mm

Nitrile

Neoprene

Tota

l Hea

d - M

etre

s H

20

Flow - Litres per minute

50005 Series

Key Description Qty Part Number1 Screw* 3 SP1004-092 Endcover 1 9328-02003 O-Ring* 1 X5251-0494 Body 1 23154-2000

Impeller Neoprene* 1 1414-0001Impeller Nitrile* 1 1414-0003

Lip Seal* (Neoprene) 1 SP2701-52Lip Seal* (Nitrile) 1 93000-6100

7 Slinger 1 63428 Screw - M5 x 8 2 X3001-147F9 Adaptor 1 50168-0000

10/11 Shaft Extension Kit 1 50167-000012 Screw - M5 x 16 4 X3001-153F13 Washer 4 X3080-081F14 Motor 4 Pole 230V 1 SP8021-0260

Service Neoprene 1 SK374-0001Kit Nitrile 1 SK374-0203

Parts marked * contained in service kit

5

6

Note : Performance shown is for a new pump, pumping water at20ºC, performance may vary by up to 15%. Consultfactory for performance of alternative impeller compounds.

Warranty: All products of the company are sold and all services of the company are offered subject to the company’s warranty and terms and conditions of sale, copies of which will be furnished upon request.The information provided herein is for guidance only, it does not constitute a guarantee of the performance or specification of any individual product or component.©Copyright 2002 ITT Industries 43010-0120 08/07© 2012 Xylem, Inc. All rights reserved. JABSCO is a registered trademark of Xylem Inc. or one of its subsidiaries. 43000-0012 Rev B