mÜpro - maral.biz · 38/40 2,000 129917 5 pieces 3,040 129945 4 4,000 129964 6,000 130011 1 39/52...
TRANSCRIPT
-
0. MÜPRO
1. Vibration control
2. Fire protection
3. Pipe clamps
4. Support channels
5. Accessories
6. Anchor points/expansion points
7. Heavy-duty pipe support
8. MPT-Support system
9. Ventilation
10. Pipe connectors
11. Stainless steel
12. Hot-dip galvanised products
13. Anchor plugs
14. Nameplates
15. Insulation
16. Sealing and protection materials
17. Tools
18. Radiator fastening
19. Technical information
MÜPRO
-
MPC-Support channels 4/1–4/4
MPC-Support channels H-Profiles 4/5–4/6
MPC-Wall hanger brackets 4/7–4/12
MPC-Wall hanger supports
MPC-Diagonal struts
4/11–4/12
4/13
MPC-Quick fasteners 4/14–4/16
MPC-Hammer head fasteners 4/17–4/18
MPC-Hammer head bolts 4/19
MPC-Rail nuts 4/20
MPC-Double rail nut 4/20
MPC-Clamp brackets 4/20
MPC-Protection caps 4/20
MPC-Channel connectors 4/21
MPC-Reinforcement angle 4/22
MPC-Channel support brackets 4/23
MPC-Saddle supports 4/24–4/25
MPC-VARIO-Saddle support
MPC-Mounting angles
4/26
4/27–4/28
MPC-Cross channel connectors 4/29
MPC-Girder cleats 4/30
MPC-Girder support 4/31
MPR-Support channel 41/41 4/32
MPR-Quick fasteners 4/33–4/34
MPR-Mounting angle 4/35
MPR-Clamp bracket 4/35
MPR-Protection cap 4/35
MPR-Cross channel connector 4/36
MPR-Girder cleat 4/37
MPR-Saddle supports 4/38
Channel connectors 4/39–4/40
Cantilever brackets 4/41
Construction brackets 4/42
Mounting angles 4/43–4/44
Angle- and T-connection plates 4/45
Cross connector plate 4/46
Lateral angles 4/47
StaboFix® Fixing system 4/49–4/52
MPC-VARIO joint 4/53
Angle rail 4/54
MÜPRO
-
MÜPRO
Profile Length [mm]
Part no. Sales unit Pack unit
27/18 L 2,000 129876 25 pieces
galvanisedMPC-Support channels 27/18 L (light)
Field of application Ideal as support structure for air ducts Variety of mounting options for pre-wall installations and shelves in combination with extensive range of system components
Advantages Quick and efficient attachment of pipe sections and multiple pipe ways Scale marks on the sides and on the side with the slot simplify the alignment of the attachment elements during installation and facilitate the measuring and cutting to length of the section on site For secure fixing that is adjustable laterally and vertically High bending stiffness due to the cross-section design For setting up structures with correctly measured static loads by means of diverse connection components Suitable vibration control elements for all support channels available Clean-cut appearance by the use of protection caps
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/1
-
MÜPRO
Profile Length [mm]
Part no. Sales unit Pack unit
27/18 1,000 129883 25 pieces2,000 1299116,000 130003 1
28/30 2,000 118590 83,040 118692 14,000 118822 86,000 118994 1
38/24 2,000 139920 106,000 139922 1
Profile 27/18
Profile 28/30
Profile 38/24
galvanisedMPC-Support channels
Field of application Ideal for pipe installation as support structure for air ducts Variety of mounting options for pre-wall installations and shelves in combination with extensive range of system components
Advantages Quick and efficient attachment of pipe sections and multiple pipe-ways Scale marks on the sides and on the side with the slot simplify the alignment of the attachment elements during installation and facilitate the measuring and cutting to length of the section on site For secure fixing that is adjustable laterally and vertically High bending stiffness due to the cross-section design For setting up structures with correctly measured static loads by means of diverse connection components Suitable vibration control elements for all support channels available Clean-cut appearance by the use of protection caps
SUPPORT CHANNELS03/13
4/2 © Müpro - A concept for progress and quality
-
MÜPRO
Features fire protection certified
Profile Length [mm]
Part no. Sales unit Pack unit
38/40 2,000 129917 5 pieces3,040 129945 44,000 1299646,000 130011 1
39/52 13001540/60 2,000 129921
3,040 1299464,000 1299656,000 130020
Profile 38/40
Profile 39/52
Profile 40/60
galvanisedMPC-Support channels
Field of application Ideal for pipe installation as support structure for air ducts Variety of mounting options for pre-wall installations and shelves in combination with extensive range of system components
Advantages Quick and efficient attachment of pipe sections and multiple pipe-ways Scale marks on the sides and on the side with the slot simplify the alignment of the attachment elements during installation and facilitate the measuring and cutting to length of the section on site For secure fixing that is adjustable laterally and vertically High bending stiffness due to the cross-section design For setting up structures with correctly measured static loads by means of diverse connection components Suitable vibration control elements for all support channels available Clean-cut appearance by the use of protection caps Support channels 38/40 and 40/60 are awarded the RAL-quality mark of the „Gütegemeinschaft Rohr-befestigung“. The following values apply:
Safety factor v = 1.54 Yield strength fy,k = 235 [N/mm2] Material DX51D Z 275 NQA Deflection delimitation L/200
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/3
C
C
-
MÜPRO
Features fire protection certified
Profile Length [mm]
Part no. Sales unit Pack unit
40/80 6,000 130024 1 pieces
Profile 40/80
galvanisedMPC-Support channels
Field of application Ideal for pipe installation as support structure for air ducts Variety of mounting options for pre-wall installations and shelves in combination with extensive range of system components
Advantages Quick and efficient attachment of pipe sections and multiple pipe-ways Scale marks on the sides and on the side with the slot simplify the alignment of the attachment elements during installation and facilitate the measuring and cutting to length of the section on site For secure fixing that is adjustable laterally and vertically High bending stiffness due to the cross-section design For setting up structures with correctly measured static loads by means of diverse connection components
SUPPORT CHANNELS03/13
4/4 © Müpro - A concept for progress and quality
-
MÜPRO
Features fire protection certified
Profile Length [mm]
Part no. Sales unit Pack unit
38/48 6,000 141179 1 pieces38/80 2,000 129870
4,000 1298726,640 129874
40/120 129875
Profile 38/48
Profile 38/80
Profile 40/120
H-Profiles, galvanisedMPC-Support channels
Field of application Ideal for space-saving support structure of multisection pipeways between ceiling joists Ideal for pipe installation as well as support structure for air ducts Variety of mounting options for pre-wall installations and shelves in combination with extensive range of system components
Advantages Quick and efficient attachment of pipe sections and multiple pipe-ways Ideal combination of high bending stiffness and ease of installation Channel slots on both sides allow simple and quick alignment of all suspended and floor-mounted pipe supports Scale marks on the sides and on the sides with the slots simplify the alignment of the attachment elements during installation and facilitate the measuring and cutting to length of the section on site Suitable vibration control elements for all support channels available Clean-cut appearance by the use of protection caps
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/5
-
MÜPRO
Technical data of profiles:
Profile Available MPC-Rail nuts
Profile weight
Profile cross-section
Moment of inertia Resistance moment Max. allowable point load capacity
[kg/m] [cm2]ly
[cm4]lz
[cm4]Wy
[cm3]Wz
[cm3]F [N] [cm]
27/18L M8, M10 0.50 0.58 0.25 0.79 0.27 0.59 1,400 727/18 0.60 0.72 0.31 1.00 0.33 0.74 1,70028/30 1.16 1.42 1.52 2.16 0.99 1.54 2,500 1238/24 M8, M10,
M12, M161.19 1.40 1.07 3.72 0.79 1.96 2,200 10
38/40 1.82 2.28 4.60 6.34 2.104 3.33 5,000 1539/52 2.80 3.45 11.07 10.10 4.26 5.18 6,700 2040/60 3.50 4.62 19.10 14.07 5.847 7.03 8,300 2340/80 4.68 5.82 40.73 18.18 10.18 9.09
38/48 H-Profile 2.28 2.91 6.51 7.63 2.71 4.02 2,200 1038/80 H-Profile 3.64 4.56 27.42 12.67 6.85 6.66 5,000 15
40/120 H-Profile 7.00 9.24 121.32 28.00 20.22 13.90 8,300 23
Max. load capacities [N] (load capacities for RAL-certified products available upon request):
Profile L [m] L [m]
0.5 1.0 1.5 2.0 4.0 6.0 0.5 1.0 1.5 2.0 4.0 6.027/18L 343 167 71 ‒ ‒ ‒ 257 98 ‒ ‒ ‒ ‒27/18 420 204 86 ‒ ‒ ‒ 315 120 ‒ ‒ ‒ ‒28/30 1,264 627 413 240 ‒ ‒ 948 470 260 141 ‒ ‒38/24 1,008 499 308 165 ‒ ‒ 756 374 181 96 ‒ ‒38/40 2,939 1,463 967 718 ‒ ‒ 2,204 1,097 725 440 ‒ ‒39/52 5,445 2,712 1,796 1,335 400 ‒ 4,084 2,034 1,347 1,001 230 ‒40/60 8,131 4,051 2,685 1,997 720 230 6,098 3,038 2,014 1,498 420 13040/80 13,021 6,494 4,310 3,212 1,520 590 9,766 4,870 3,232 2,409 940 350
38/48 H-Profile 3,466 1,725 1,140 845 ‒ ‒ 2,594 1,295 855 625 ‒ ‒38/80 H-Profile 8,759 4,366 2,895 2,156 1,010 380 6,556 3,277 2,171 1,616 620 220
40/120 H-Profile 25,862 12,903 8,517 6,395 3,060 1,930 19,396 9,677 6,428 4,796 2,300 1,180
Profile L [m] L [m]
0.5 1.0 1.5 2.0 4.0 6.0 0.5 1.0 1.5 2.0 4.0 6.027/18L 172 70 ‒ ‒ ‒ ‒ 143 55 ‒ ‒ ‒ ‒27/18 210 86 ‒ ‒ ‒ ‒ 175 67 ‒ ‒ ‒ ‒28/30 632 313 186 101 ‒ ‒ 526 261 146 79 ‒ ‒38/24 504 249 129 69 ‒ ‒ 420 208 102 54 ‒ ‒38/40 1,469 731 483 315 ‒ ‒ 1,224 609 403 248 ‒ ‒39/52 2,722 1,356 898 667 170 ‒ 2,269 1,130 748 556 130 ‒40/60 4,065 2,025 1,342 998 300 100 3,388 1,688 1,118 832 240 8040/80 6,511 3,247 2,155 1,606 670 250 5,426 2,706 1,796 1,338 530 190
38/48 H-Profile 1,733 862 570 423 ‒ ‒ 1,444 719 475 352 ‒ ‒38/80 H-Profile 4,579 2,183 1,477 1,078 450 160 3,649 2,183 1,206 894 350 130
40/120 H-Profile 12,931 6,451 4,285 3,197 1,530 850 10,776 5,376 3,571 2,664 1,280 660
MPC-Support channelsgalvanised
SUPPORT CHANNELS03/13
4/6 © Müpro - A concept for progress and quality
! The determined technical data applies for static loads.
-
MÜPRO
Features
Profile Length L [mm]
Part no. Sales unit Pack unit Dimensions [mm]
H1 b s C V
27/18 200 118562 25 pieces 120 40 4 80 11 x 19300 118656500 118888
28/30 240 118602400 118771
38/40 160 118518 30 6240 118604320 118704 25400 118775480 118849560 118908 20640 119006 10720 119050800 119072 1
1,040 11845340/60 560 118940 200 100 8 155 13 x 30
640 119029800 119090
1,040 11846538/80 400 118807
800 119087
Profiles 27/18, 28/30 and 38/40 Profiles 38/80 and 40/60
galvanisedMPC-Wall hanger brackets
Field of application Ideal as cantilever support structure of multisection pipeways Applicable as cantilever bracket for air ducts and cable trays Applicable in combination with saddle support and channel support brackets as a cross-beam for pipe attachments in shafts and ducts Solid wall bracket for valves and equipment The 38/80 profile is ideally suitable for double-sided installation of pipe sections due to double channel slots
Advantages The strong base plate ensures a high load carrying capacity The oblong holes in the base plate allow easy height adjustment of the bracket Variety of lengths covers all con-struction requirements Clean-cut appearance by the use of protection caps
fire protection
certifiedfrom 38/40, up to 720 mm long
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/7
-
MÜPRO
Max. load capacities:
Profile Length L[mm]
Max. allowable load [N]27/18 200 526 263 263 175
300 350 143 175 116500 163 50 76 49
28/30 240 1,317 658 658 439400 787 393 393 262
38/40 160 4,597 2,298 2,298 1,532240 3,062 1,531 1,531 1,020320 2,294 1,147 1,147 764400 1,832 916 916 610480 1,524 762 762 508560 1,304 612 652 434640 1,138 467 569 379720 1,009 367 504 336800 905 296 444 287
1,040 549 171 257 16640/60 560 3,613 1,806 1,806 1,204
640 3,156 1,578 1,578 1,052800 2,514 1,242 1,257 838
1,040 1,918 727 959 63938/80 400 5,465 2,732 2,732 1,821
800 2,711 1,355 1,355 903
At the stated values, the max. admissible steel stress sadm. = 160 N/mm2 and the max. admissible deflection L/150 are not exceeded − dead weight has also been considered.!
MPC-Wall hanger bracketsgalvanised
SUPPORT CHANNELS03/13
4/8 © Müpro - A concept for progress and quality
-
MÜPRO
For support
channels
Length L [mm]
Part no. Sales unit
Pack unit Dimensions [mm]
H1 b s C V
40/60, 40/80, 40/120
560 118401 1 pieces 200 49 4 154 13 x 30640 118405800 118413
1,040 118397
! See MPC-Wall hanger bracket 40/60 for load-bearing capacities. When mounted in the channel slots, the max. recommended shear and tensile loads for the accessories (e. g. MPC-Hammer head bolts) must be observed.
for the attachment on support channels, galvanisedMPC-Wall hanger brackets
Field of application Wall hanger bracket with solid, rounded-edge base plate for the attachment on support channels Solid cantilever construction due to support from diagonal strut
Advantages Clip-over edges of the base plate for good appearance Variety of set lengths covers all constructional requirements Simple height adjustment when mounted in the channel slot Clean-cut appearance by the use of protection caps
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/9
-
MÜPRO
For support channels
Length L [mm]
Part no. Sales unit Pack unit Dimensions [mm]
H1 b s C V
27/18 600 119156 20 pieces 120 40 4 80 11 x 1928/30 400 119142 2538/40 240 119138 20 6
480 119148
with lateral slot, galvanisedMPC-Wall hanger brackets
Field of application Ideal as cantilever support structure for riser pipes Applicable in combination with saddle support and channel sup-port brackets as a cross-beam for pipe attachments in shafts and ducts Applicable as a cantilever bracket for supporting air ducts
Advantages The strong base plate ensures a high load carrying capacity The oblong holes in the base plate allow easy height adjustment of the bracket Fixing in the side slot of the support channel allows simple alignment of parallel pipelines
SUPPORT CHANNELS03/13
4/10 © Müpro - A concept for progress and quality
-
MÜPRO
Length L [mm]
Part no. Sales unit Pack unit
480 113538 1 set560 113544640 113547800 113550
1040 113535
without vibration control, galvanisedMPC-Wall hanger supports
Field of application For wall mounting of air-condi-tioning units where no vibration damping is required
Advantages Efficient mounting due to pre-assembled parts MPC-Support channels cut-to length and with holes on the rear side including MPC-Protection caps Various bracket lengths available (depending on device type)
Simple height adjustment of the brackets due to sliding MPC- Hammer head bolts Variable adjustment of the mount-ing spaces on the bracket due to MPC-Rail nuts
Complete kit consists of: 2 MPC-Support channels 38/40, length 520 mm 2 MPC-Wall hanger brackets 38/40 6 MPC-Protection caps for 38/40 profile 4 MPC-Hammer-head bolts M10/30 4 Washers 8.5 x 36 x 2 mm 4 MPC-Rail nuts M8 for 38/40 profile 4 Hexagon head bolts M8/20 4 MPC-Clamp brackets M10 for 38/40
profile
Features
Length L [mm]
Max. recommended load (set)
[N]
480 1,500560 1,500640 1,500800 1,200
1040 0,900
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/11
-
MÜPRO
Length L [mm]
Part no. Sales unit Pack unit
480 113493 1 set560 113511640 113517800 113523
1040 113487
with vibration control, galvanisedMPC-Wall hanger supports
Field of application For the vibration dampened attachment of equipment such as ventilation and air conditioning devices, pumps, household water tanks, etc. on walls
Advantages Efficient mounting due to pre-assembled parts MPC-Support channels cut-to length and with holes on the rear side including MPC-Protection caps
Various bracket lengths available (depending on device type) Simple height adjustment of the brackets due to sliding MPC- Hammer head bolts Variable adjustment of the moun-ting spaces on the bracket due to MPC-Rail nuts Average vibration reduction of 17 dB(A) due to DÄMMGULAST® Resilient pads
Complete kit consists of: 2 MPC-Support channels 38/40, length 520 mm 2 MPC-Wall hanger brackets 38/40 4 DÄMMGULAST® Resilient pads
43 x 11 mm 6 6 MPC-Protection caps for 38/40
profile 4 MPC-Hammer head bolts M10/30 4 DÄMMGULAST® Washers 8.5 x 28 mm 4 Washers 8.5 x 28 x 1 mm 4 MPC-Rail nuts M8 for 38/40 profile 4 Hexagon head bolts M8/55 4 MPC-Clamp brackets M10 for 38/40
profile
FeaturesVibration control
Length L [mm]
Max. recommended load (set)
[N]
480 1,500560 1,500640 1,500800 1,200
1040 0,900
SUPPORT CHANNELS03/13
4/12 © Müpro - A concept for progress and quality
-
MÜPRO
For support channels Length L [mm]
Part no. Sales unit Pack unit
38/40, 39/52, 40/60, 40/80, 38/80, 40/120
440 129790 1 pieces900 139228
Features
Length L [mm]
Mounting of bracket and diagonal strut in the
support channel slot max. recommended load
F [N]
Directly mounted max. recommended load
F [N]
440 2,500 6,000
900 2,000 3,000
galvanisedMPC-Diagonal struts
Field of application Diagonal strut applicable for the direct wall-mounting of wall hanger brackets
Advantages Quick mounting due to pre-installed double rail nuts With clip-over edges for the wall hanger bracket Oblong holes at the side enable the positioning of MPC-Support chan-nels 38/40 with slot at the side
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/13
-
MÜPRO
For profiles 38/24 to 40/120For profiles 27/18 and 28/30
with external thread, galvanisedMPC-Quick fasteners
Field of application Secure and easy installation in slot of MPC-Support channel in order to connect pipe clamps
Advantages Time-saving attachment in the channel slot, even if subsequently fitted between existing pipe sec-tions Simple and secure handling: insert in the MPC-Support channels, turn and the MPC-Quick fastener is fixed. No slipping, no falling out Adjustment marks on the side facili-tate its positioning in the support channel Reduction of installation effort due to integral threaded pin in various lengths Threaded pins are secured against unscrewing Subsequent height adjustment of the threaded pin facilitates correc-tions of the installation Suitable for all MPC-Support chan-nels 27/18 to 40/120
Features fire protection certified≥ 38/40
For support channels
Connecting thread Usable thread length L
[mm]
Total length [mm]
Part no. Sales unit Pack unit
27/18, 28/30 M8 7 30 120890 100 pieces25 50 12087045 70 12088265 90 120886
M10 30 55 12083838/24−40/120 M8 7 35 120894 50
30 60 12087440 70 120878
M10 7 35 12084625 55 12083450 80 120842
SUPPORT CHANNELS03/13
4/14 © Müpro - A concept for progress and quality
-
MÜPRO
Features fire protection certified≥ 38/40
Type For support channels Connecting thread Part no. Sales unit Pack unitWith internal thread 27/18, 28/30 M8 120858 100 pieces
M10 12082238/24−40/120 M8 120862
M10 120826For angle mounting M8 120790
M10 120782
For profiles 38/24 to 40/120For profiles 27/18 and 28/30
For angle mounting
with internal thread, galvanisedMPC-Quick fasteners
Field of application Secure and easy installation in slot of MPC-Support channel in order to attach mounting accessories Angle-mounting for fast and effi-cient installation of brackets and mounting angles
Advantages Time-saving attachment in the channel slot, even if subsequently fitted between existing pipe sections Simple and secure handling: insert in the MPC-Support channels, turn and the MPC-Quick fastener is fixed. No slipping, no falling out Adjustment marks on the side facilitate its positioning in the sup-port channel High quality and load capacity Suitable for all MPC-Support channels 27/18 to 40/120
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/15
-
MÜPRO
For support channels MPC-Quick fasteners
Connecting thread Max. recommended tensile load FZ
[N]
Max. recommended transverse load FQ
( displacement)[N]
For a tightening torque of [Nm]
27/18 M8 1,400 300 10M10
28/30 M8 2,100 350M10
For support channels MPC-Quick fasteners
Connecting thread Max. recommended tensile load FZ
[N]]
Max. recommended transverse load FQ
( displacement)[N]
For a tightening torque of [Nm]
38/24 M8 2,000 500 20M10 25
38/40 M8 2,800 1,000 20M10 25
39/52 M8 3,300 20M10 25
40/60 M8 4,000 20M10 25
40/80 M8 20M10 25
38/80 M8 2,800 20M10 25
40/120 M8 4,000 20M10 25
MPC-Quick fastenerswith internal thread, galvanised
SUPPORT CHANNELS03/13
4/16 © Müpro - A concept for progress and quality
-
MÜPRO
galvanisedMPC-Hammer head fasteners
Field of application For time-saving, efficient attach-ment of pipe clamps to MPC- Support channels
Advantages Practical range of lengths For insertion at any point into the slot of channel support profiles 27/18 and 28/30 Lateral adjustment at any time, allows perfect alignment of the pipeline after installation Various lengths and thread dia-meters can be combined within the same channel
Features fire protection certified≥ 38/40
For support channels
Connecting thread Length [mm]
Usable thread length [mm]
Part no. Sales unit Pack unit
27/18, 28/30 M8 20 7 115129 100 pieces30 15 11515240 25 11516650 35 11517560 45 11517870 55 11518180 65 11519090 75 115193
100 85 115113120 105 115116140 125 115119160 145 115122180 165 115125
M10 35 18 11510438/24‒40/120 M8 25 7 115056 50
35 20 11507440 25 11508050 35 11509280 65 115101
100 85 115035120 105 115038140 125 115041160 145 115044180 165 115047
M10 35 18 11499055 35 11499980 60 115002
100 80 114963120 100 114966140 120 114969160 140 114972180 160 114975
M12 35 15 115014
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/17
-
MÜPRO
For support channels Max. allowable bearing point load
capacity of channel[N]
MPC-Hammer head fasteners
Connecting thread Max. recommended tensile load FZ
[N]
Max. recommended transverse load FQ
( displacement)[N]
For a tightening torque of
[Nm]
27/18 1,700 M8 1,000 400 10M10 1,700 1,200 30
28/30 2,500 M8 1,000 400 10M10 2,500 1,200 30
For support channels Max. allowable bearing point load
capacity of channel[N]
MPC-Hammer head fasteners
Connecting thread Max. recommended tensile load FZ
[N]
Max. recommended transverse load FQ
( displacement)[N]
For a tightening torque of
[Nm]
38/24 2,200 M8 1,000 600 20M10 2,200 800 30
38/40 5,000 M8 2,500 1,000 20M10 2,800 1,200 30M12 5,000 1,800 40
39/52 6,700 M8 3,000 850 20M10 3,300 1,200 30M12 6,700 1,800 40
40/6040/80
8,300 M8 3,500 1,000 20M10 4,000 1,200 30M12 8,300 1,800 40
38/80 5,000 M8 2,500 1,000 20M10 2,800 1,200 30M12 5,000 1,800 40
40/120 8,300 M8 3,500 1,000 20M10 4,000 1,200 30M12 8,300 1,800 40
MPC-Hammer head fastenersgalvanised
SUPPORT CHANNELS03/13
4/18 © Müpro - A concept for progress and quality
-
MÜPRO
Connecting thread Length [mm]
Usable thread length [mm]
Part no. Sales unit Pack unit
M8 30 20 115340 50 piecesM10 19 115298M12 17 115316
Features
For support channels Connecting thread Max. allowable bearing point load
capacity of channel[N]
Max. recommended tensile load FZ
[N]
Max. recommended transverse load FQ
( displacement)[N]
For a tightening torque of
[Nm]
38/24 M8 2,200 2,200 600 20M10 800 30M12 1,000 40
38/40, 38/80 M8 5,000 5,000 20M10 1,500 30M12 1,800 40
39/52 M8 6,700 6,700 1,000 20M10 1,500 30M12 1,800 40
40/60, 40/80, 40/120 M8 8,300 8,300 1,000 20M10 1,500 30M12 1,800 40
Brandschutz-geprüft
ab 38/40
galvanisedMPC-Hammer head bolts
Field of application For time-saving, efficient attach-ment to MPC-Support channels
Advantages Ideal for attachment of channel constructions and connecting elements Suitable for profiles 38/24, 38/40, 39/52, 40/60, 40/80, 38/80 and 40/120
For direct insertion in the channel slot – even between the attachment bolts
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/19
-
MÜPRO
MPC-Rail nutsgalvanised
For
support channels
Thread Length [mm]
Width [mm]
Height [mm]
Part no. Sales unit Pack unit
27/18, 28/30
M6 21.5 11.5 4 118013 100 piecesM8 14.0 5 120043
38/24, 38/40, 39/52, 40/60, 40/80, 38/80, 40/120
M6 32.8 20.0 148759M8 33.0 23.0 6 118040
30.0 11.5 118067M10 33.0 23.0 117968M12 117986M16 33.0 9 117998 25
Size 38/24 to 40/120
Size 27/18 to 28/30
MPC-Double rail nut
galvanised
For support channels Part no. Sales unit Pack unit38/24, 38/40, 39/52, 40/60,
40/80, 38/80, 40/120117944 50 pieces
galvanised
For support channels For thread Part no. Sales unit Pack unit27/18, 28/30 M8 114439 100 pieces
M10 11450338/24, 38/40, 38/48,
38/80M8 114447
M10 11445039/52, 40/60, 40/80,
40/120M8 114471
M10 114474M12 114477M16 114459 25
MPC-Clamp bracket heavy-duty
to transfer large forces, galvanised
For support channels For thread Part no. Sales unit Pack unit39/52, 40/60, 40/80,
38/80, 40/120M10/M12 114557 25 pieces
MPC-Protection caps
For support channels Part no. Sales unit Pack unit27/18 106000 100 pieces28/30 106002
38/24, 38/48 10600438/40, 38/80 106006 50
39/52 10600740/60, 40/120 106008 25
40/80 106009
MPC-Clamp brackets
For support
channels
Thread Length [mm]
Width [mm]
Height [mm]
Part no. Sales unit Pack unit
27/18, 28/30
M6 21.5 11.8 4 118013 100 piecesM8 14.0 5 120043
38/24, 38/40, 39/52, 40/60, 40/80, 38/80, 40/120
M6 31.0 16.0 6 14875732.8 23.0 148759
M8 31.0 16.0 14876132.8 23.0 118040
M10 31.0 16.0 14785432.8 23.0 117968
M12 117986M16 32.5 32.5 8 148762 25
SUPPORT CHANNELS03/13
4/20 © Müpro - A concept for progress and quality
fire protection certified≥ 38/40
-
MÜPRO
For support channels
Part no. Sales unit Pack unit Dimensions [mm]
L b
27/18, 28/30 120060 50 pieces 148 2538/40, 39/52,
40/60120076 25 152 40
i Please refer to page 4/39 for the heavy-duty version of the channel connectors.
galvanisedMPC-Channel connectors
Field of application Quick butt-joint connection for MPC-Support channels
Advantages Enables exact alignment of the channel Four bolts provide a frictional joint Smooth attachment by sliding into the channel section
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/21
-
MÜPRO
For support channels Part no. Sales unit Pack unit
38/24, 38/40, 39/52, 40/60, 40/80, 38/80,
40/120
129797 1 pieces
galvanisedMPC-Reinforcement angle
Field of application Ideal as support for wall hanger brackets 38/40 where transverse forces occur
Advantages Suitable for wall, ceiling and floor mounting Further mounting facilities for angle and joint connection of MPC-Sup-port channels 2 connecting screws and MPC-Rail nuts are included in the supply
Suitable for: Support of wall hanger bracket 38/40 Applicable as angle and joint connection of all MPC-Support channels
SUPPORT CHANNELS03/13
4/22 © Müpro - A concept for progress and quality
-
MÜPRO
Description For support channels
Part no. Sales unit Pack unit Dimensions [mm]
b1 V L1Crosswise 27/18, 28/30 129627 25 pieces 24 11 x 19 50
38/24, 38/40, 39/52, 40/60, 40/80
129631 30 33
Lengthwise 27/18, 28/30 129618 24 238/24, 38/40,
39/52, 40/60, 40/80129623 30
MPC-Channel support bracket, lengthwise
MPC-Channel support bracket, crosswise
MPC-Channel support bracket,crosswise
MPC-Channel support bracket, lengthwise
galvanisedMPC-Channel support brackets
Field of application Ideal for attachment of MPC-Support channels as cross-beam in shafts and ducts For right-angled connection of two channels where section slots do not have the same alignment Applicable as floor or ceiling mounting for vertical MPC-Support channels
Advantages Consistent oblong holes in the base plate enable easy height adjust-ment of the MPC-Channel support bracket Supplied with two clamping bolts, pre-installed
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/23
-
MÜPRO
MPC-Saddle support, lengthwiseMPC-Saddle support, crosswise
MPC-Saddle support, lengthwise for profiles 38/80, 40/80 and 40/120
Mounting example with MPC-Double rail nut
MPC-Saddle support, lengthwise for profiles 38/80 and 40/120
MPC-Saddle support, lengthwiseMPC-Saddle support, crosswise
galvanisedMPC-Saddle supports
Field of application Simple assembly of strong cross-beams using MPC-Support chan-nels Applicable for cramped installation conditions in shafts and ducts
Advantages Consistent oblong holes in the base plate enable simple alignment of the flange Good load transfer due to the high bending stiffness of the saddle con-nection Ideal connecting element for chan-nel section structures The section 38/80 provides torque-resistant support as channel is encompassed on both sides
Features fire protection certified
38/40, 39/52, 40/60, 40/80
Description For support channels Part no. Sales unit
Pack unit Dimensions [mm]A B b s L L1 C
Crosswise 27/18, 28/30 129648 30 pieces 125 40 30 5 70 84 11 x 1938/24, 38/40, 39/52, 40/60, 40/80, 41/41 129649 25 136 50 42 6 90 95 13 x 25
Lengthwise 27/18, 28/30 129633 30 114 30 5 70 73 11 x 1938/24, 38/40, 39/52, 40/60, 41/41 129638 25 144 70 42 6 90 103 13 x 25
38/80, 40/80 129645 1 200 100 8 15540/120 139813 246 200
i MPC-Double rail nut, please refer to page 4/20.
SUPPORT CHANNELS03/13
4/24 © Müpro - A concept for progress and quality
-
MÜPRO
For support channels
Part no. Sales unit Pack unit Dimensions [mm]
A B b s L L1 C
38/40, 39/52, 40/60, 40/80
129658 8 pieces 136 50 42 6 90 95 13 x 25
Features
For girder flange expanses TW TW ≥ 260 mmMax. recommended load for cut length L < 500 mm 3.0 kN 3,000 NMax. recommended load for cut length L < 700 mm 2.0 kN 2,000 NMax. recommended load for cut length L < 900 mm 1.0 kN 1,000 NCut length L of the channel section Girder flange expanse (inside), TWi − 17 mm
thrust piece crosswise, galvanisedMPC-Saddle support type 3
Field of application Crosswise saddle support with clamping bolts for a safe and quick installation of the MPC-Support channels between the flange of structural steel sections
Advantages Fastening on the structural steel element without drilling or welding work; saves time and costs Secure installation of the MPC-Support channels in the channel slot through double rail nuts Can be fastened quickly and easily via clamping screws Universal implementation at different section widths
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/25
-
MÜPRO
For support channels Minimum angle [°] Part no. Sales unit Pack unit38/40, 38/48, 39/52,
40/60, 40/8020 129660 1 pieces
Installation of brackets in vaults or round cable ducts and shafts
Pipes installed on a MPC-Wall hanger with diagonal strut
Attachment of a pipe run to an inclined roof truss
galvanisedMPC-VARIO-Saddle support
Field of application Ideal for attachment to inclined roof trusses, vaults and in round cable shafts
Advantages Variable angle adjustment possible during installation Simple and quick installation due to pre-installed double rail nut Attachment to the slot of support channels 38/40 possible in all directions
Completely pre-assembled: 1 MPC-VARIO-Saddle support 1 Double rail nut 2 Hexagonal head bolts M10 2 Washers
SUPPORT CHANNELS03/13
4/26 © Müpro - A concept for progress and quality
-
MÜPRO
Angle [°] For support channels Part no. Sales unit Pack unit45 27/18, 28/30 118753 50 pieces90 118797
for MPC-Support channels 27/18 and 28/30, galvanisedMPC-Mounting angles
Field of application Solid fixing element for construction of pre-wall installations, shelves as well as for channel constructions for mountings of pipelines and air ducts without welding Also applicable for direct mounting on walls, ceilings or floors
Advantages Versatile in use due to oblong holes Versatile in use, e. g. as:
Angular support bracket Angular load-bearing bracket Connection element Angular bracket
Multi-purpose component for professional, practical installation solutions
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/27
-
MÜPRO
For support channels Part no. Sales unit Pack unit
38/24, 38/40, 39/52, 40/60, 40/80, 38/48,
38/80, 40/120
118769 25 pieces
for MPC-Support channels 38/24 to 40/120, galvanisedMPC-Mounting angle 45˚
Field of application Solid fixing element for construction of pre-wall installations, shelves as well as for channel constructions for mountings of pipelines and air ducts without welding Also applicable for direct mounting on walls, ceilings or floors
Advantages Versatile in use, e. g. as:
Angular support bracket Connection element
Multi-purpose component for professional, practical installation solutions Quick installation on site due to pre-assembled bolts and washers
Completely pre-assembled: 1 MPC-Mounting angle 45˚ 2 Hexagonal head bolts M10 2 Washers
SUPPORT CHANNELS03/13
4/28 © Müpro - A concept for progress and quality
-
MÜPRO
For support channels
Part no. Sales unit Pack unit Dimensions [mm]
A B C D H H1 L28/30 118243 25 pieces 31 25 80 9.0 31 13 10438/40 118246 41 40 10.5 41 18 11038/48 144838 49 ‒39/52 145069 5340/60 118316 62
38/80, 40/80 118276 8240/120 118284 122
For profiles 38/48, 39/52, 40/60, 40/80, 38/80 and 40/120
galvanisedMPC-Cross channel connectors
Field of application For cross-connections in pre-wall installations and for shelves made from MPC-Support channels
Advantages Easy-to-install connection elements for setting up structures with the correctly calculated static loads using MPC-Support channels Greater flexibility when setting up structures made from channels Multiple punching allows the sec-tion slots to be aligned in 4 direc-tions For rotation-resistant attachment to building structure
For profiles 28/30 and 38/40
For profiles 28/30 and 38/40 For profiles 40/60, 40/80, 38/80 and 40/120
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/29
-
MÜPRO
For support channels
Thread Part no. Sales unit Pack unit Dimensions [mm]
A B C H H1 L L2
27/18, 28/30 M6 130281 50 pieces 37 60 80 18.0 29.0 43.8 27.838/24, 38/40 M8 130283 20 48 70 17.0 24.5 38.2 27.239/52, 40/60 130284 10038/40, 39/52,
40/60M10 130273 50 80 18.5 39.7 30.7
38/80, 40/80 130274 15 12540/120 130277 180
FeaturesM8 and M10
For support channels Thread Max. permitted load/pair [N]
27/18, 28/30 M6 2,80038/24, 38/40 M8 5,40039/52, 40/60 6,000
38/40, 39/52, 40/60 M10 10,40038/80, 40/80 8,750
40/120
galvanisedMPC-Girder cleats
Field of application Attachment of MPC-Support chan-nels to steel girders without drilling or welding
Advantages Attachment to supporting structure without welding or drilling Allows subsequent adjustment of the channels along and across the supporting structure Suitable for all flange thicknesses of common girders Easy to install, pre-assembled kit Proper attachment of suspended loads on girders Approved by VdS, if used with thread M8 or M10 for profiles 38/40 or 40/60
SUPPORT CHANNELS03/13
4/30 © Müpro - A concept for progress and quality
-
MÜPRO
For support channels Part no. Sales unit Pack unit27/18, 28/30 130286 20 pieces
! Larger spans are possible, however at reduced loads.
Features
For girder flange width B Min. 90 mm to max. 350 mmMax. recommended load F 850 NCut length L of the channel section L = B − 25 mm
galvanisedMPC-Girder support
Field of application Clamping element for fastening MPC-Support channel sections between the flanges of structural steel sections
Advantages Ideal for attachment of pipelines and electrical systems to steel girders Attachment to the girder without welding or drilling Tight hold due to 3-point load trans-fer on both sides Lock washer for a secure hold in the channel section during instal-lation Simple attachment of pipelines using MPC-Hammer head fasten-ers Adaptable to all girder widths on site by the length of the channel section
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/31
-
MÜPRO
Features fire protection certified
Profile Length [mm]
Part no. Sales unit Pack unit
41/41 1,000 105253 1 pieces2,000 1052543,000 1052554,000 1052566,000 130048
Technical data of the profiles:
Profile Available quick fasteners
Profile weigth
Profile cross-section
Moment of inertia Resistance moment Max. allowable point load capacity
[kg/m] [cm2]ly
[cm4]lz
[cm4]Wy
[cm3]Wz
[cm3]F [N] [cm]
41/41 M8, M10, M12 2.97 3.71 7.65 11.37 3.65 5.48 6,000 20
Max. load capacities [N]:
Profile L [m] L [m] L [m] L [m]
0.5 1.0 1.5 2.0 0.5 1.0 1.5 2.0 0.5 1.0 1.5 2.0 0.5 1.0 1.5 2.041/41 4,670 2,320 1,540 1,139 3,499 1,743 1,152 733 2,333 1,161 768 526 1,944 967 640 413
! At the stated values, the max. admissible steel stress szul. = 160 N/mm2 and the max. admissible deflection L/150
are not exceeded − dead weight has also been considered.
galvanisedMPR-Support channels 41/41
Field of application Ideal as support structure for air ducts Variety of mounting options for wall-mounted installations and shelves in combination with extensive range of system components
Advantages Quick and efficient attachment of pipe sections and pipeways High bending stiffness due to the cross-section design Scale marks on the sides and on the side with the slot simplify the alignment of the attachment
elements during installation and facilitate the measuring and cutting to length of the channel on site For secure fixing that is adjustable laterally and vertically For setting up structures with correctly measured static loads by means of diverse connection elements Gears within the channel slot for form-locking attachment of add-on parts Strong, square C-profile combines compact design with optimum load-bearing capacity
SUPPORT CHANNELS03/13
4/32 © Müpro - A concept for progress and quality
-
MÜPRO
Features
Connecting thread Part no. Sales unit Pack unitMPR-Quick fasteners M8 120907 100 pieces
M10 120898M12 120902
MPR-Quick fasteners for angle mounting
M8 120806M10 120798
MPR-Quick fasteners for angle mounting
MPR-Quick fasteners
galvanisedMPR-Quick fasteners
Field of application For secure and fast installation in the channel slot of MPR-Support channels for connecting pipe clamps and mounting elements Angle-mounting for fast and effi-cient installation of brackets and mounting angles
Advantages Versatile quick fastener for all common channel profiles with upturned edges in the channel slot Simply turn into the slot – click and ready For channels with a material thick-ness of 2 to 3 mm Can be used for slot widths from 20 mm upwards Gives a secure hold once it has been turned, remains adjustable till the screw is tightened Secure hold even in vertical chan-nel slots Tooth profile on the fastener ensures form-locking connection with toothed channel sections Suitable for MPR-Support channels 41/41
fire protectioncertified F90
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/33
-
MÜPRO
Insert the MPR-Quick fastener in the channel slot
Rotate the MPR-Quick fastener by 90°
Position the MPR-Quick fastener in the channel
Screw the threaded pin into the MPR-Quick fastener and lock in place with a hexagonal nut. Then mount the pipe clamp
For support channel Connecting thread Max. recommended tensile load Fz
[N]
Max. recommended transverse load FQ
(displacement) [N]
Tightening torque [Nm]
41/41 M8 6,000 3,000 30M10M12
FQ
FQ
Mounting instructions:
MPR-Quick fastenersgalvanised
SUPPORT CHANNELS03/13
4/34 © Müpro - A concept for progress and quality
-
MÜPRO
for MPR-Support channel 41/41, galvanisedMPR-Mounting angle 45°
For support channel Part no. Sales unit Pack unit
41/41 118781 25 pieces
Field of application Solid fixing element for construc-tions of wall-mounted installations, shelves as well as for channel con-structions for pipeline attachments and air ducts without welding Also applicable for direct mounting on walls, ceilings or floors
Advantages Variable mounting options Versatile in use, e. g. as:
Angular support bracket Angular load-bearing bracket Connection element Angular bracket
Multi-purpose component for professional, practical installation solutions
MPR-Clamp bracket heavy-duty
to transfer large forces, galvanised
For support channel For thread Part no. Sales unit Pack unit41/41 M8, M10, M12 114489 25 pieces
MPR-Protection cap
For support channel Part no. Sales unit Pack unit41/41 106011 50 pieces
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/35
-
MÜPRO
For support channel
Part no. Sales unit Pack unit Dimensions [mm]
A B C D H H1 L
41/41 118332 25 pieces 42.5 40 81.5 10.5 44 19.5 111.5
galvanisedMPR-Cross channel connector
Field of application For cross-connections in pre-wall mounted installations and shelves made from MPR-Support channels
Advantages Easy-to-install connection ele-ment for setting up structures with correctly designed static loads using MPR-Support channels Greater flexibility when setting up structures made from channels Multiple punching allows the section slots to be aligned in 4 directions For rotation-resistant attachment to building structure
SUPPORT CHANNELS03/13
4/36 © Müpro - A concept for progress and quality
-
MÜPRO
For support channel
Thread Part no. Sales unit Pack unit Dimensions [mm]
A B C H H1 L L2
41/41 M10 130279 15 pieces 52 80 80 18.5 24.5 39.7 30.7
galvanisedMPR-Girder cleat
Field of application Attachment of MPR-Support chan-nels to steel girders without drilling or welding
Advantages Ideal solution for attachment of MPR-Support channels to steel girders Attachment to the girder without welding or drilling Allows subsequent adjustment of the channels along and across the supporting beam Suitable for all flange thicknesses of common support profiles Easy to install, pre-assembled kit Proper attachment of suspended loads on girders
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/37
-
MÜPRO
Features fire protection certified
Description For support channel
Part no. Sales unit Pack unit Dimensions [mm]
A B b s L L1 C
Crosswise 41/41 129649 25 pieces 136 50 42 6 90 95 13 x 25 Lengthwise 129638 144 70 103
MPR-Saddle support, lengthwiseMPR-Saddle support, crosswise
MPR-Saddle support, lengthwiseMPR-Saddle support, crosswise
galvanisedMPR-Saddle supports
Field of application Simple assembly of strong cross-beams using MPR-Support chan-nels Applicable for cramped installation conditions in shafts and ducts
Advantages Consistent oblong holes in the base plate allow simple alignment of the flange Good load transfer due to the high bending stiffness of the saddle con-nection Ideal connecting element for chan-nel constructions
SUPPORT CHANNELS03/13
4/38 © Müpro - A concept for progress and quality
-
MÜPRO
For support channels Part no. Sales unit Pack unit Dimensions [mm]
b L
38/40, 39/52, 40/60, 40/80, 38/48, 38/80,
40/120, 41/41
120136 1 pieces 50 160
heavy-duty version, galvanisedChannel connector
Field of application Quick butt-joint connection for MPC- and MPR-Support channels
Advantages Enables exact alignment of the channels Four bolts provide a frictional joint Form-locking connection between channel and connector (passthrough installation) Also available in double length for heavy-duty connections
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/39
-
MÜPRO
For support channels Part no. Sales unit Pack unit Dimensions [mm]
b L
38/40, 39/52, 40/60, 40/80, 38/48, 38/80,
40/120, 41/41
134833 1 pieces 50 320
heavy-duty version, double length, galvanisedChannel connector
Field of application Channel connector in heavy, stable design for secure connection of MPC- and MPR-Support channels
Advantages Form-locking connection due to max. eightfold screw connection Especially long guidance of the connected MPC- and MPR-Support channels ensures a high level of protection against lateral deflection Oblong holes in the channel con-nector compensate tolerances when installing
SUPPORT CHANNELS03/13
4/40 © Müpro - A concept for progress and quality
-
MÜPRO
Version Type Size [mm]
Part no. Sales unit Pack unit
207 x 160 ‒ 207 x 160 x 4 113610 1 pieces200 x 200 1 200 x 200 x 4 113628
2 200 x 200 x 6 113643
Cantilever bracket 200 x 200Cantilever bracket 207 x 160
Cantilever bracket 200 x 200Cantilever bracket 207 x 160
galvanisedCantilever brackets
Field of application For attachments to ceiling, wall and floor, free-standing or in a shaft Strong support bracket for water meters, distributing batteries, pumps and many other items
Advantages Variety of mounting possibilities when used with MPC- and MPR-Support channels Reinforces and increases the load capacity of channel structures and cross-beams Even greater strength values can be achieved by bolting two equal-sided cantilever brackets together
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/41
-
MÜPRO
Type Size [mm]
Part no. Sales unit Pack unit
1 200 x 125 x 4 113598 1 pieces2 280 x 164 x 4 113601
Type 2Type 1
galvanisedConstruction brackets
Field of application Ideal connecting element for the construction of cross-beams, frames and shelving systems
Advantages Great variety of mounting possi-bilities when used with MPC- and MPR-Support channels Provides solid joint and angle con-nections Any arrangement of channel open-ing possible For direct mounting on ceilings, walls and floors or for installation with MPC- and MPR-Support chan-nels as:
Angular support brackets Angular load-bearing brackets Floor supports Junction brackets Cross connections Transverse support angles Support angles Connection element Angular bracket
SUPPORT CHANNELS03/13
4/42 © Müpro - A concept for progress and quality
-
MÜPRO
For support channels Part no. Sales unit Pack unitMounting angle 90° 38/24, 38/40, 39/52, 40/60,
40/80, 38/48, 38/80118808 25 pieces
Mounting angle 90°, pre-assembled
147764
Mounting angle 90˚
galvanisedMounting angles 90˚
Field of application Solid fixing element for construction of pre-wall installations, shelves as well as for channel constructions for mountings of pipelines and air ducts without welding Also applicable for direct mounting on walls, ceilings or floors
Advantages Variable fitting possibilities Versatile in use, e. g. as:
Angular support bracket Angular load-bearing bracket Connection element Angular bracket
Multi-purpose component for professional, practical installation solutions Can be provided already pre-assembled with MPC-Double rail nut for the quick attachment within channel slot
Mounting angle 90˚, pre-assembled
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/43
-
MÜPRO
For support channels Part no. Sales unit Pack unit38/40, 39/52, 40/60, 40/80, 38/48,
38/80, 40/120, 41/41118820 25 pieces
short, galvanisedMounting angle 90°
Field of application Strong and good value connect-ing element for the construction of frames, shelves and supports for pre-wall mounted installations
Advantages Creation of rigid structures without welding High flexibility and easy mounting Good adjustment to the widths of MPC- and MPR-Support channels
SUPPORT CHANNELS03/13
4/44 © Müpro - A concept for progress and quality
-
MÜPRO
For support channels Part no. Sales unit Pack unitAngle plate 38/40, 39/52, 40/60, 40/80,
38/80, 40/120, 41/41127840 25 pieces
T-connection plate 130297
T-connection plateAngle plate
T-connection plateAngle plate
galvanisedAngle- and T-connection plates
Field of application Strong connection elements for frames and pre-wall installations using the MPC- and MPR-System components
Advantages Simple and quick connection of angles and T-connections The mounting plates allow frame construction in one plane, in which the channel slots have the same alignment Good adaptation to channel widths; the corners remain free in frame constructions Quick and simple attachment in combination with the MPC-Quick fastener for angle mounting Hole spacings allow pass-through mounting using the MPC- and MPR-Support channels
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/45
-
MÜPRO
For support channels Part no. Sales unit Pack unit38/40, 39/52, 40/60, 40/80, 38/48,
38/80, 40/120, 41/41113778 25 pieces
galvanisedCross connector plate
Field of application Cross connection plate for connect-ing up to four MPC- and MPR-Sup-port channels in one plane
Advantages Attachment at the rear perforation of the MPC- and MPR-Support channel leaves the channel slot free in all directions and enables fast installation of add-on parts Ideal connection element for crea-ting subconstructions for ceiling suspensions
SUPPORT CHANNELS03/13
4/46 © Müpro - A concept for progress and quality
-
MÜPRO
Lateral angle, right
Lateral angle, left
Lateral angle, double-sided
galvanisedLateral angles
Field of application Connecting elements for the con-struction of frames, shelves and wall-mounted installations using MPC- and MPR-Support channels
Advantages Creation of solid connections with-out welding Various mounting options for stable joint and angle connections with MPC- and MPR-Support channels Appropriate combination of ele-ments allows junctions with up to four exit directions Great flexibility – a large variety of connections can be made with only a few components Quick and simple attachment in combination with MPC- and MPR-Quick fastener for angle mounting
Features fire protection certified lateral angle
right & left
Description Angle [°] For support channels Part no. Sales unit Pack unitRight 90 38/40, 39/52, 40/60,
40/80, 38/48, 38/80, 41/41
123068 25 piecesLeft 123060
Double-sided 123048
! Stainless steel version available upon request.
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/47
-
MÜPRO
Lateral angle, double-sidedLateral angle, leftLateral angle, right
Construction of shelf using MPC- Support channels − junction point with connections in 4 directions
Construction of shelf using MPC- Support channels − junction point with connections in 3 directions
Construction of shelf using MPC- Support channels − junction point with connections in 2 directions
Frame construction consisting of MPC-Support channels, MPC-Wall hanger brackets, mounting angles, short and connection plates
galvanisedLateral angles
SUPPORT CHANNELS03/13
4/48 © Müpro - A concept for progress and quality
-
MÜPRO
Size [mm]
Part no. Sales unit Pack unit
StaboFix® Section 2.000 x 50 x 3 129076 10 piecesStaboFix® Retaining plate 75 x 55 129073 25
StaboFix® SectionStaboFix® Retaining plate
For simple, quick and secure fixing of pipe clamps with connection threads M8 and M8/M10
StaboFix® SectionStaboFix® Retaining plate
galvanisedStaboFix® Fixing system
Field of application Fixing system for mounting in cramped shafts, ducts and washba-sin installation
Advantages High flexibility due to versatile range of applications in front of and within a wall, in wall recesses, wall break-throughs as well as in supply shafts Simple folding on site can bring the StaboFix® Sections into the desired form The StaboFix® Retaining plate can be simply and quickly clipped onto the sections and enables the attachment of non-twisting and cen-tred wall carrier plates Smooth attachment of all common sanitary systems, while obtaining standard sanitary measures by means of a special hole template in the section Simple height adjustment of syphon bends or cross-running pipes using StaboFix® Clamps and threaded pins Pipe clamps with connection threads M8 and M8/M10 can be simply and quickly attached with StaboFix® Bolts All system components are per-fectly matched to each other reduc-ing the assemebly effort High quality and firmness of the components Effective installation due to the basic assortment of installation components
For the fixing of syphon bends and cross-running pipes – simple height adjustment
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/49
-
MÜPRO
Part no. Sales unit Pack unitStaboFix® Plumbers case 129068 1 piecesStaboFix® Economy set 1 StaboFix® Plumbers case + 20 StaboFix® sections
130587 set
StaboFix® Economy setStaboFix® Plumbers case
StaboFix® Fixing system
Field of application Carrying case includes complete set to be used on the construction site
Advantages Practical basic assortment in the robust, handy metal carrying case Access to the items due to the well laid-out arrangement of the case StaboFix® Pliers within the case No loose parts lying around on site Compact case size of 400 x 300 x 90 mm Also available as economy kit: the complete StaboFix® Plumbers case plus 20 StaboFix® sections
The StaboFix® Fixing system consists of: 1 StaboFix® Pliers 10 StaboFix® Retaining plates 10 StaboFix® Clamps 30 StaboFix® Bolts M8 short 30 StaboFix® Bolts M8 long 100 StaboFix® Drilling screws 4.2 x 16 100 StaboFix® Drilling screws 4.8 x 19 50 Threaded pins M8 x 40 50 Threaded pins M8 x 60 100 Washers for M8 100 Hexagon nuts M8
SUPPORT CHANNELS03/13
4/50 © Müpro - A concept for progress and quality
-
MÜPRO
Installation in a shaft:Pass-through mounting with two pipe clamps and a threaded pin M8 or M10 for the attachment of parallel pipelines
Installation in a shaft: Pipe clamps are fitted in no time using the StaboFix® M8 bolt
Washbasin installation: Installation in tight wall recesses
Washbasin installation: Everything fitted exactly to gauge
Installation in a wall: Waste pipe of washing machine
Wall-mounted installation: Wall-mounted installation using StaboFix® with MPC-Support chan-nels
StaboFix® Fixing system
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/51
-
MÜPRO
StaboFix® Pliersfor StaboFix® Fixing system
With minimum effort you can bend the StaboFix® Sections to the right shape using the pliers Bending angles of 90° and more
Part no. Sales unit Pack unit129070 1 pieces
StaboFix® Clampfor StaboFix® Fixing system, galvanised
For safe and quick attachment of threaded pins for pipe clamp mounting The simple, stepless height adjustment enables an exact alignment of cross-running pipelines
For thread Part no. Sales unit Pack unit
M8 129075 25 pieces
StaboFix® Boltsfor StaboFix® Fixing system, galvanised
For simple, quick and secure attachment of pipe clamps with connection threads M8 and M8/M10
For pipe clamps with connecting thread
Size [mm]
Part no. Sales unit Pack unit
M8 M8 x 8 129078 100 piecesM8/M10 M8 x 13.5 129077
StaboFix® Drilling screwsfor StaboFix® Fixing system, galvanised
With pozidriv cross-head for attachment to the StaboFix® Retaining plate
Size [mm]
Part no. Sales unit Pack unit
4.2 x 16 129071 100 pieces4.8 x 19 129072
SUPPORT CHANNELS03/13
4/52 © Müpro - A concept for progress and quality
-
MÜPRO
For support channels
Length [mm]
Width [mm]
Thickness [mm]
Hole diameter [mm]
Part no. Sales unit Pack unit
38/24‒40/120 90 40 4 11 139746 25 pieces
Features
Max. recommended load [N] 2,000Angle adjustment min. 10°
zinc-nickelMPC-VARIO joint
Field of application Flexible implementation for con-necting MPC-Support channels, for which different angle adjustments are required for versatile implemen-tation possibilities, such as frame subconstructions for solar modules, angular support brackets, etc.
Advantages Pivot angle from 10° to 180° for fast and flexible adaptation to a wide variety of attachment situa-tions – saves time and costs at the construction site Cost savings can be realised in the area of stockkeeping, as a variety of support solutions Stable design of the joint for optimal transmission of force Quick and easy mounting at the construction site via double rail nuts Zinc-nickel coating ensures trouble-free outdoor use
SUPPORT CHANNELS03
/13
© Müpro - A concept for progress and quality 4/53
-
MÜPRO
Length [mm]
Part no. Sales unit Pack unit
1,000 127858 25 pieces
Mounting example for vertical pipe routings
Mounting example for horizontal pipe routings
Features
Perforation 4.1 mm for bolts and rivets 8.5 mm for pipe attachments
galvanisedAngle rail
Field of application For the attachment of pipelines in dry building construction For screwing or riveting on metal supports of drywalls
Advantages Versatile use at restaurations or renovations Connection options via 4.1 mm and 8.5 mm perforation Attachment for vertical and horizontal pipe routings
SUPPORT CHANNELS03/13
4/54 © Müpro - A concept for progress and quality