nc-iot11 nc-link iot low-power wi-fi module datasheet

www.nc-link.cn

Confidential and Proprietary Information of 8

Copyright © 1996-2014 NC-LINK TECHNOLOGY LIMITED. All Rights Reserved

NC-LINK low-power Wi-Fi™

The premier connectivity platform

for emerging device categories that

comprise the Internet of Everything

NNCC--IIOOTT1111 IIooTT LLooww--ppoowweerr WWii--FFii

MMoodduullee

DDaattaasshheeeett

This document is subject to change without notice. The document

contains NC-LINK confidential information and must not be disclosed

to any third party without appropriate NDA.

www.nc-link.cn



1. Module Information

Model Name: NC-IOT11 IoT Low-power Wi-Fi Module

(802.11bgn 1T1R with 4-Layer Design)

PCB Version: V1.0

RF Front End Type 1T1R

System Engineer: Richard Ou

H/W Engineer: James Su

Test Place: NC-LINK-SZ Wireless LAB

OS: Windows XP SP3

Test Equipment: IQ Xel 80Mhz

Note:

www.nc-link.cn



2. Introduction

NC-IOT11 IoT Low-power Wi-Fi Module is an ultra-compact, low-power embedded

Wi-Fi module based on Realtek RTL8189, a fully integrated System-on-Chip that is fully

compatible with IEEE 802.11 b/g/n MAC /baseband /radio,which support multiple Wi-Fi

working modes and power save modes, designed for embedded devices, such as home

automation, toys, health care, automobile electronics and I.o.T solutions. NC-IOT11 IoT

Module has a Cortex-M3 MCU with rich peripherals, users can build their own embedded

Wi-Fi applications based on our SDK which manage all of the Wi-Fi MAC and TCP/IP

stack processing.

The NC-IOT11 further enables innovative, energy-efficient applications, including

mobile applications and Cloud-based services for the mass market. At a maximum MCU

speed of 108 MHz, it offers the fastest MCU to date, based on a 32-bit ARM Cortex-M3

core. The SOC also has 1024K of on-chip serial flash memory, 96KB SRAM. In addition,

the NC-IOT11 provides some extensive sets of peripheral interfaces, including up to

GPIOs, JTGA,UART, SPI, PWM and A/D.

3. System Architecture

4. Key Features

www.nc-link.cn



1、ARM® Cortex®-M3 Core at 108 MHz

2、Up to 7 Individually Programmable, Multiplexed GPIO Pins

3、4 General-Purpose Timers with 16-Bit Pulse Width Modulation (PWM) Mode

4、Support TCP/IP Stack, Wi-Fi and Internet Protocols in ROM

5、802.11 b/g/n Radio, Baseband, Medium Access Control (MAC), Wi-Fi Driver, Full

security support: WPA, WPA2, WEP

6、Support Work As STA/AP/AP+STA Mode

7、Support SPI and UART host interface

8、Support one button to factory reset

9、Android/iOS SmartLink APP tools for Autonomous and Fast Wi-Fi Connections

10、Support OTA Update Firmware

11、Power-Management Subsystem < 150mA @ 3.3V

12、On-chip user development for hostless applications

– Real-time operating system (RTOS) on the chip central processing unit

– Supported toolchain

5. Applications

For Internet-of-Things applications, such as:

– Cloud Connectivity

– Internet Gateway

– Home Automation

– Industrial Control

– Home Appliances

– Smart Plug and Metering

– Access Control

– Wireless Audio

– Security Systems

www.nc-link.cn



– IP Network Sensor Nodes

– Smart Energy

6. Specification

Testing Environment：Ta=25°C，Vcc=3.3V

█ Power Consumption

www.nc-link.cn



7. Pin Arrangement

www.nc-link.cn



8. GPIO Table

www.nc-link.cn



NC-LINK TECHNOLOGY LIMITED

Headquarters

825-1 Room, Block B, TianHui Building, Yousong Road, Longhua Street, Baoan District,

Shenzhen, P.R. China.

Tel: +86 755 23014181

Website: www.nc-link.cn

Contact : [email protected]

http://www.nc-link.cn/

nc-iot11 nc-link iot low-power wi-fi module datasheet

Technology