nikiret - pks.rs¾ba za informisanje i odnose sa javnošću... · 3 branches of activities, list...
TRANSCRIPT
NIKIRET – branch of FSUE FSPC “PС “Start” named after M. V. Protsenko”
STATE ATOMIC ENERGY CORPORATION “ROSATOM”
www.rosatom.ru
SCIENTIFIC & PRODUCTION BRANCH DEVELOPMENT OF SECURITY SYSTEMS
Departmental subordination – State Corporation “Rosatom”
NIKIRET was founded in 1977;
Staff number – 800;
Until 2012 PC “Start” and NIKIRET have developed and produced in series over one hundred names of products intended to solve different tasks in providing security, equipping the following:
over 14.0 thousand km of State Border in Russia and CIS countries;
over 8.0 thousands оf VIP facilities and enterprises of national security, defence industry complex, fuel and energy complex, government facilities.
43 frontier outposts in North Caucasus Border District.
There are all necessary licenses for R&D activities, mounting, assembly, starting-up and adjustment works, development and production.
www.rosatom.ru 3
BRANCHES OF ACTIVITIES, LIST OF PRODUCTS
Development, production and improvement of technical security equipment (TSE) Facility vulnerability analysis and development of conceptual designs. Development of design estimates Equipment package delivery Assembly, starting-up and adjustment works Training of operating company personnel and security service professionals Analysis and update of existing regulatory basis or development of a new basis Warranty and post-warranty aftersales service
Alarm complexes Access control systems and intrusion alarm systems Data acquisition and display systems Perimeter detectors Mobile systems and complexes Locking devices and systems Power supply devices and systems for TSE and automation systems Engineering means of perimeter physical protection
Branches of Activities:
List of Products:
www.rosatom.ru
1 2 3 4 5 6 7 8
NEW DEVICES
Integrated Security System “Zirconiy S-2000” It is used as a system base to build centralized complexes for facilities of different purpose, including those located on spatial territories. The system provides for access authorization and control inside the facility, protection of facility perimeter and protection of buildings, structures, zones located on the facility territory, communication with CCTV-systems. General service connection interface simplifies connection to equipment produced by different manufacturers.
www.rosatom.ru
1 2 3 4 5 6 7 8
INTEGRATED SECURITY SYSTEM “ZIRCONIY-S2000”:
Functional and Structural Specifications.
Modular structure of the system makes it possible to optimize costs for building physical protection system of high-reliability;
It provides for decentralized security control;
It provides for outposts in local zones;
It permanently controls the passing sequence of checkpoints;
It permanently controls personnel location on the territory and in rooms of facilities;
It provides for open system architecture.
www.rosatom.ru
1 2 3 4 5 6 7 8
DISTINCTIVE FEATURES OF “ZIRCONIY – S2000”
It provides for programmed response to events registered by the system; Real-time operation mode is efficiently implemented on basis of CAN-networks; It provides for backup of control computers and controller communication cables; Each user gets a list of authorized rooms and access points; It supports flex-time and temporary operating schedule for users; Access control functions and guard functions are closely integrated; Principle of operation is according to “2”… “6” persons rule; Separate list of people “authorized to open” for each room; Remote control of detectors; Operating temperature of controllers with security functions is - 50 to +50 ºC.
www.rosatom.ru
1 2 3 4 5 6 7 8
Alarm Complex for Long Boundary Protection GOBY-212E
www.rosatom.ru
1 2 3 4 5 6 7 8
It is intended to provide security of State Border and industrial facilities with lengthy perimeters. Maximum length of protected boundary is 20 km. Various detectors with volumetric zone are used. It can work together with video surveillance system for buildings and perimeters of adjacent territories. It can be integrated into systems of upper level.
Alarm Complex for Long Boundary Protection GOBY-212E
www.rosatom.ru
1 2 3 4 5 6 7 8
Data acquisition and display device that displays information from detectors and connecting lines (breakage or short circuit) providing time reference, audible and light indication, made on basis of bicolour light-emitting diodes and a liquid-crystal display.
Built-in control system of peripheral devices and two-level protection of input and output circuits against overvoltage, which appear at lightning discharges. It can control electromechanical locks and electric power supply.
Number of Alarm Loops 16 or 32 Maximum length of communication line to intrusion alarm means is up to 5000 m Number of locks connected 16/32 Operating temperatures range is +5…+40 ºС Power supply voltage 11…30 V Maximum power consumption 10 Watt Operation when power is cut off is up to 30 days
The device can be used at facilities where no regular maintenance personnel is present, since it provides for time delay mode of alarm loop activation/de-activation. It provides for short circuit protection.
DATA ACQUISITION AND DISPLAY DEVICE FOCUS-SM 16/32
www.rosatom.ru
1 2 3 4 5 6 7 8
Rapid Deployable Alarm Complex (BSK) “Pautina-M”
www.rosatom.ru
1 2 3 4 5 6 7 8
PURPOSE & DISTINCTIVE FEATURES
PAUTINA-M complex is a rapid deployable off-line mobile security alarm system. It is intended to detect intruders to terrain sectors under control. Sectors are controlled by detectors that have different physical principles of operation. Alarm and service information is transmitted via two-way secured radio channel to Central Control Panel (CCP) and Portable Control Channel (PCP); detectors are also controlled using them.
Radio network of the complex is built on basis of wireless sensor networks. It is a distributed self-organizing system, tolerant to failures of separate elements. Each detector can retransmit messages from adjacent sectors. Radio network structure of the complex makes it possible to build straight-line protected sectors and local enclosed zones. When detectors are located at a long distance from CCP information is transmitted using retransmitters. Data transmission route is formed automatically (via adjacent detectors, and (or) retransmitters) by criterion of providing highest quality of radio communication. When radio interferences occur, when separate components break down, when battery cells are low due to discharge or when any other reasons arise disrupting radio communication, it causes message delivery route to change automatically, bypassing the defective sector, which is displayed at CCP.
www.rosatom.ru
1 2 3 4 5 6 7 8
The complex makes it possible:
to build temporary alarm boundaries and local controlled zones on unequipped terrain promptly;
to control temporary perimeters where people, vehicles and material valuables are stationed at;
to monitor in a covert way the area at remote approaches to protected facilities and to provide terrain reconnaissance;
to build intrusion alarm system at facilities with no communication and power lines available;
to strengthen monitoring of most hazardous sectors (for instance, when stationary alarm systems are under repair, when special security rules are imposed, etc.);
to control remote facilities with no permanent human presence (valve stations of oil and gas transmission pipe-lines, power transmission towers, transforming substations and etc.).
PURPOSE & DISTINCTIVE FEATURES
www.rosatom.ru
1 2 3 4 5 6 7 8
PURPOSE & DISTINCTIVE FEATURES
The complex provides for the following:
it contains a wide range of detectors working on various physical principles;
it can determine direction of intruder motion through the controlled boundary by “to us” and “from us” criterion;
it provides for intruder classification: single/group/vehicle and armed/unarmed.
it monitors radio communication channels, power supply sources and if components are in working order in a permanent automatic way;
it requires minimum level of user training;
it can be connected to outer security system via RS-485 interface;
it can work together with mobile video surveillance system KIPARIS-VIDEO;
it can work together with KSM-RW complex.
www.rosatom.ru
1 2 3 4 5 6 7 8
COMPONENTS
Bistatic Radio-Wave Detector BSK-RWD
PURPOSE:
to build controlled boundaries and local zones on unequipped terrain including wooded areas and areas with thick vegetation promptly.
FEATURES:
• when used it does not require regular maintenance (re-alignment, grass mowing);
• it provides detection properties in deep snow (0.5 m snow over the unit is allowed);
• it provides high noise immunity when installed in high thick grass and wooded area (including when there is no direct visibility between the units);
• here is detection zone behind the units (0.5 meters).
www.rosatom.ru
1 2 3 4 5 6 7 8
COMPONENTS
Bistatic Radio-Wave Buried Detector BSK-RWP
PURPOSE: to monitor in a covert (camouflaged) way protected boundaries on unequipped terrain (including swamp and sandy soils). FEATURES: concealed afield installation: the detector can be installed on the ground surface using natural concealment means (branches of trees, foliage, stones, and etc.) or buried into the ground at a depth of 0.1 m maximum from upper surfaces of units to the ground surface. BSK-RWP is resistant to the following noise factors: - trees and bushes within the detection zone; - solid flooding of RX unit and TX unit by snow melt water or precipitations; - snow blanket height up to 1m.
www.rosatom.ru
1 2 3 4 5 6 7 8
COMPONENTS
Infrared Passive Monostatic Detector BSK-IK
PURPOSE:
to detect intruders in hard-to-reach terrain sectors (roads, wood trails, mountain passes, ravines, canyons, coastal areas, and etc.).
FEATURES:
to detect targets moving within the detection zone axis.
www.rosatom.ru
1 2 3 4 5 6 7 8
COMPONENTS
Bistatic Microwave Detector BSK-RLD
PURPOSE: to build lengthy boundaries and local control zones on flat terrain promptly.
www.rosatom.ru
1 2 3 4 5 6 7 8
COMPONENTS
Seismic Detector BSK-S
PURPOSE: to build a concealed (camouflaged) protected boundary on unequipped terrain sectors. The detector is buried into the ground 0.2-0.3 m deep. FEATURES: • it classifies targets moving along the ground within the detection zone: “single”, “group”, “vehicle”; • it can be adapted to specific operating conditions by means of PCP; • it can determine the direction of motion, when SSE link (seismosensing element link) is connected.
www.rosatom.ru
1 2 3 4 5 6 7 8
COMPONENTS
Magnetometric Detector BSK-M
PURPOSE: to detect armed intruders and vehicles. FEATURES: • high camouflage level; • no dead zones; • installation at any ground and any terrain. BSK-M is immune to the following noise factors: •- precipitations such as rain of any intensity; •- grass cover of any height within the detection zone; •- trees and bushes within the detection zone; •- snow blanket up to 0.5 m.
www.rosatom.ru
1 2 3 4 5 6 7 8
COMPONENTS
Monostatic Radio-Wave Detector BSK-RLO
PURPOSE: to build short protected boundaries and to monitor areas, where it is hard or impossible to use other types of detectors promptly. FEATURES: • detection zone length is adjusted via radio channel. BSK-RLO is immune to the following noise factors: - precipitations such as rain up to 40 mm/h; - grass height within the detection zone 0.2 m maximum; - continuous gradient of underlying surface up to 30º; - snow blanket height up to 0.5 m.
www.rosatom.ru
1 2 3 4 5 6 7 8
COMPONENTS
Break-Wire Detector BSK-O
PURPOSE: to build concealed protected boundaries of any form by means of laying a microwire and controlling its integrity. Microwire is made of double copper wire which is a sensing element. Boundary is built by fastening the sensing element on local objects at 0.1 - 0.5 m height from the ground surface. BSK-O is immune to the following noise factors: - precipitations such as rain up to 40 mm/h; - grass of any height within the detection zone; - trees and bushes within the detection zone.
www.rosatom.ru
1 2 3 4 5 6 7 8
COMPONENTS
External Device Unit BVU PURPOSE: • to provide power supply, receipt and transmission of information from two detectors, which have no built-in radio modems; • to switch on and off two external devices (audible and light signal devices, video cameras, and etc.) by means of relay or via RS-485 interface; • to receive information from detectors with RS-485 interface by agreed protocol.
Central Control Panel CCP PURPOSE: • to display location of the complex components on location map (layout) in the form of pictographs, with coordinates of detectors installed and their state; • to receive and display alarm and service information from detectors; • to control detector operation; • to provide audible alarm; • to archive messages, logging time and date; • to transmit information to systems of higher level.
www.rosatom.ru
1 2 3 4 5 6 7 8
COMPONENTS
Portable Control Panel PCP
PURPOSE: • to record geographic coordinates for installation location of the complex components; • to check serviceability of detectors, RT, BVU; • to exchange messages and commands with CCP via radio channel; • to display current messages from detectors, RT and BVU; • to provide audible alarm; • to define afield location coordinates of alarm response guards, by means of built-in GPS receiver.
Retransmitter RT
PURPOSE: to retransmit messages from detectors and external device unit to central control panel and portable control panel. When several retransmitters are installed in series, information can be transmitted up to 100 km.
www.rosatom.ru
1 2 3 4 5 6 7 8
Purpose: •to build temporary alarm boundaries and local protected zones promptly on unequipped flat, wooded and cross-country terrain; •to provide ambush and search-intelligence activities; •to build an additional protected boundary of stationary facilities in case of robust security regime or if main security alarm system needs repairing. Length of a boundary protected by one kit is up to 1 km; point of detection is specified with accuracy up to 15-20 m. Operating time from built-in power sources is 3 months minimum. Information is transmitted to Central Panel via radio channel to a distance up to 10 km.
Mobile Security System KSM-RW
www.rosatom.ru
1 2 3 4 5 6 7 8
Mobile Security System KSM-RW
PERIPHERAL UNIT
up to m20
RADIO-WAVE DETECTION ZONE
20 - 1000 m
CENTRAL UNIT RETRANSMITTER
up to km10
up to km1
SEISMIC DETECTION ZONE
www.rosatom.ru
1 2 3 4 5 6 7 8
Multizone Video Surveillance System “KASHTAN-VIDEO”
It is intended to provide video surveillance over long protected boundaries; to provide video logging of intruders within a video coverage zone in response to signals from detectors or signals from the clock timer, or when operator gives a command.
The system forms local distributed structure of video surveillance in separate zones at low unit costs for its organization.
Video information is transferred and system is powered over a seven-wire cable line.
“KASHTAN-VIDEO” system can be used both as a self-contained system and as a component of perimeter complexes of technical security equipment.
Maximum length of protected boundary is 20 km.
Operating temperatures of the complex components is -40 to +70 °C.
www.rosatom.ru
1 2 3 4 5 6 7 8
Mobile Video Surveillance System “KIPARIS-VIDEO” with Information Transmission via Radio Channel
It is intended to provide video surveillance over remote protected boundary sectors and remote unattended local facilities;
Video logging of intruders is provided within a video coverage zone in response to signals from detectors or signals from the clock timer, or when operator gives a command.
Use of KIPARIS-VIDEO system makes it possible to build local video surveillance sectors with self-contained power supply and wireless transmission of information to long distances promptly and efficiently.
KIPARIS-VIDEO system can be used on its own, as well as a part of mobile and stationary complexes of technical security equipment.
Maximum length of protected boundary is 20 km.
Operating temperatures of the complex components is -40 to +70 °C.
www.rosatom.ru
1 2 3 4 5 6 7 8 MVS system provides photographic recording of a target (upon control command
signal, timer clock signal or combined) with subsequent image transmission to stationary equipment.
The use of high-resolution cameras (3 Мрх and more) makes it possible not to use expensive variable-focus lenses and provides electronic zooming (digital ZOOM)
Freeze-frame received Freeze-frame: 10-fold zoom
Mobile Video Surveillance System “KIPARIS-VIDEO” with Information Transmission via Radio Channel
www.rosatom.ru
1 2 3 4 5 6 7 8
NEW DETECTORS
Perimeter Detectors with Intelligent Processing: Microwave Bistatic Detectors “RLD Redut/1-300I”, “RLD Redut-500” Microwave Monostatic Detectors “Flang-125”, “Korall-SM-U/1” Wire-Wave Detector “Gazon-24” Vibration Seismic Detector “Godograf-Universal” They are intended to build long security boundaries of facilities along different types of fences, in the ground and on its surface; to provide alarm blocking of small size facilities; to monitor approach roads of protected facilities. They can remotely be adjusted and set, diagnosed and exchange information with data acquisition and processing system via RS-485 interface. High probability of detection (0,99). Control panel with signal level indicator simplifies the process of setting and troubleshooting. Lightning protection of external circuits.
www.rosatom.ru
1 2 3 4 5 6 7 8
Microwave detectors operating principles
Microwave detectors belong to active
types of detecting devices, that
generate electromagnetic field of
specific intensity within the controlled
territory (detection zone). They also
generate alarm signal in case of signal
level changes at receiver input, when
intruder crosses the detection zone.
www.rosatom.ru
1 2 3 4 5 6 7 8
MICROWAVE BISTATIC DETECTOR
“RLD REDUT/1-300I”, “RLD REDUT-500”
The detector generates a volumetric narrow detection zone along: • long perimeter sectors (with a fence or without it); • top of the fence; • walls, windows and roofs of the buildings; • gates, wickets. Detection zone length is 5 to 300 m; Maximum detection zone width when length is 300 m is 3.5 m (RLD Redut/1-300I)
www.rosatom.ru
1 2 3 4 5 6 7 8
RADIO-WAVE BISTATIC DETECTOR “RAPS-22”
Stationary protection of local terrain sectors, perimeter sectors, gates and roads: • on flat and uneven terrain, including the forest; • along concrete, brick or mesh fences.
Detection zone length is 5 to 30 m; Maximum detection zone width is 2.0 m; Operating temperatures range is -50 to +70 0С.
www.rosatom.ru
1 2 3 4 5 6 7 8
SPECIFICATIONS - Detection zone (DZ) length 5 to 25 m - DZ width (if DZ length is maximum) 8 m maximum - DZ height (if DZ length is maximum) 5 m minimum - Supply voltage 12…30 V - Consumption current 200 mA max. (at Upower = 24V)
Detector “KORALL-SM-U/1”
The detector generates a volumetric detection zone along: – long perimeter sectors (it is used both with the fence and without it); – fence top; – walls, windows and roofs of industrial buildings; – gates and wickets; – roads and train tracks; – protected sector bordering with a pond; – local zones where other types of detectors cannot be used (approaches to buildings, premises, ways out of ponds).
Detector Operating Conditions:
-operating ambient temperature –50…+70 °С - grass / snow height 0.3 / 0.5 m
www.rosatom.ru
1 2 3 4 5 6 7 8
“KORALL-SM-U/1” Distinctive Features
1. It can operate both as a perimeter detector and an area detector.
2. It can operate both indoors and outdoors.
3. Easy installation and maintenance (one operator can perform seasonal adjustment).
4. Ability of smooth adjustment of detection zone length from 5 to 25 m (on the place of installation on site) with built-in adjustment controls.
5. RS-485 interface provides remote adjustment, diagnosis and information exchange with remote control and monitoring devices (SDKU devices).
6. Ability to change electromagnetic field polarization provides tune-out of perturbing radiations of radio-electronic systems.
7. Remote test of detector operability by operator command using RT signal.
8. Built-in protection system of circuits against lightning discharges and pick-ups.
www.rosatom.ru
1 2 3 4 5 6 7 8
PERFORMANCE SPECIFICATIONS Detection zone length up to 75 m
Detection zone width in the vertical / horizontal plates 2/ 2 m
Permissible level of grass/snow 0.3 / 0.8 m
Power supply voltage 12…30 V
Consumption current 50 mA maximum
Monostatic detector on the basis of linear frequency modulation is intended to provide protected boundaries in perimeters of sites, gate sectors and wicket sectors.
DISTINCTIVE FEATURES:
– Ability to provide authorized passages inside DZ (with 5 m discreteness and 1 m error); – Easy and convenient adjustment via RS-485; – continuous outdoor operation; daily maintenance is not required; – it can be fixed to the walls;
Detector “Flang-125”
Detector Operating Conditions:
- ambient operating temperature –50…+70 °С
www.rosatom.ru
1 2 3 4 5 6 7 8
VIBRATION-SEISMIC DETECTOR “GODOGRAF-UNIVERSAL”
Depending on the sensing element selected it can be used as a vibration, seismic or combined detector.
It is intended to build protected boundaries at long terrain sectors, perimeters of facilities, small-size facilities (block valve stations, tank farms, transformer substations, and etc.), driveways and gateways to protection site, approach roads and routes to protection site.
Maximum length of protected boundary 500 m (2 х 250) Depth of detected undermining 0.7…1.0 m Power supply voltage 20 to 30 V Service life 8 years
www.rosatom.ru
1 2 3 4 5 6 7 8
VIBRATION-SEISMIC DETECTOR “GODOGRAF-UNIVERSAL”
Sensing element can be mounted on various fences: galvanized welded mesh, polymer coated mesh, flat razor wire fence, fences made of standard concrete slabs and of metal shape profile sections. It can be mounted on outriggers made of razor wire concertina or galvanized welded mesh.
www.rosatom.ru
1 2 3 4 5 6 7 8
Sensing element can be mounted on various fences: helical razor wire concertina, fences made of standard concrete slabs and of metal shape profile sections. It can be mounted on outriggers made of razor wire concertina or galvanized welded mesh.
VIBRATION-SEISMIC DETECTOR “GODOGRAF-UNIVERSAL”
www.rosatom.ru
1 2 3 4 5 6 7 8 Vibration sensing elements are installed on outrigger made of razor wire concertina coil, galvanized welded mesh coils. Detector is used to detect digging under the fence.
VIBRATION-SEISMIC DETECTOR “GODOGRAF-UNIVERSAL”
www.rosatom.ru
1 2 3 4 5 6 7 8
Vibration sensing element link
- each sector (VSE segment) is 50 m long. - each sector can include up to 10 VSE segments with total length 500 m maximum. - detector provides protection of the boundary, which is 1000 m long. - device provides detection of the intrusion place with accuracy to 50 m. - high noise-immunity by means of individual signal processing at each VSE segment with succeeding signal group processing by the detector as a whole. - VSE segment mounting is similar to VSE mounting at all fence and outrigger types.
www.rosatom.ru
1 2 3 4 5 6 7 8 - seismic sensing element (SSE) of new generation that can define direction of intruder’s route and categorize intruder (single, group, vehicle); - SSE length is 20 m; - protected boundary up to 250 m long can be organized at each sector; - opportunity to organize virtual boundary; - virtual boundary can stretch up to 250 m at each sector; - boundary length protected by a detector equipped with SSE can be up to 500 m; -SSE can be used together with VSE (vibration sensing element). -opportunity to detect DZ crossing direction (“from us”/”to us”).
Seismic sensing element link
-combined operating mode (vibration sensing element on the fence, seismic sensing element along the fence);
-high noise immunity;
-early detection of intruder approaching the fence;
-immunity to circulation along a virtual boundary (guard path)
- ability to control guard route.
Virtual boundary
Vibration sensing element
Seismic Sensing Element (SSE) Link
Godograf-Universal Electronic Unit
Seismic Sensing Element (SSE) Link
www.rosatom.ru
1 2 3 4 5 6 7 8
UNIVERSAL WIRE-WAVE DETECTOR “GAZON-24”
Total length of protected boundary 10 - 500 m Length of each sector 10 - 250 m Service life 8 years
The detector is intended to protect long boundaries and perimeters of stationary facilities with complicated terrain topography and boundary configuration. The detector provides blocking of protected boundaries : - when local part of detector is installed at sectors without fences (including when additional physical obstacle made of barbed tape concertina is used); - when local part is installed along the fence fabric made of metal mesh; - when local part is installed along the top of the fence, made of any material. The detector consists of signal processing unit (SPU) and two generating units (GU), installed on opposite ends of wire line made by upper and lower wires
www.rosatom.ru
1 2 3 4 5 6 7 8 Detector installation
without a fence Detector installation along the fence
Detector installation on the top of the fence
“Gazon-24” installation variants
www.rosatom.ru
1 2 3 4 5 6 7 8 Detector installation on mesh fence Detector installation on the fence
made of razor wire
Detector installation on concrete fence
“Gazon-24” installation variants
www.rosatom.ru
1 2 3 4 5 6 7 8
RUBEZH-M ELECTROMECHANICAL LOCK
The lock is installed on doors and wickets 20 to 100 mm thick from inside of a protected zone.
It provides joint operation with “Zirconiy - S 2000”, “Orion”, “Focus - SM” systems. Deadbolt is thrown manually using handles from the outside and inside of a protected zone. Deadbolt is locked automatically when closed. Control sensors of crossbar position “Open / Close” and locking mechanism “Locked / Received”. Deadbolt is released remotely. It can be emergency released (locked) with a key from the inside and outside of a protected zone. All variants of installation have uniform design.
www.rosatom.ru
1 2 3 4 5 6 7 8
KORUND-EMZU ELECTROMECHANICAL LOCK
The lock is installed inside rooms on wooden and metal doors of box section 40 to 100 mm thick.
It can be used independently or as a part of access control systems. Deadbolt is thrown manually using handles from the outside and inside of a protected zone. Deadbolt is locked (released) automatically. Control sensors of crossbar position “Open / Close” and locking mechanism “Locked / Received”. It can be emergency released (locked) with a key from the outside of a protected zone and with a handle from the inside of a protected zone.
www.rosatom.ru
1 2 3 4 5 6 7 8
GOBY-EMZU ELECTROMECHANICAL LOCK
The lock is installed inside of a protected zone on wooden and metal gates and wickets (left and right) 25 to 100 mm thick, opening inwards or outwards, single or double leaf swinging or sliding ones.
It provides joint operation with “Zirconiy - S 2000”, “Orion”, “Focus - SM” systems. All structural elements have increased strength and resistance to corrosion. Deflection of gate leaves is balanced relative to each other during seasonal fluctuations of the ground. Deadbolt is released remotely. Control sensors of crossbar position “Open / Close” and locking mechanism “Locked / Received”. It can be emergency released (locked) with a key from the inside of a protected zone. A latch is locked automatically when closed.
www.rosatom.ru
1 2 3 4 5 6 7 8
BAZALT-EMZU ELECTROMECHANICAL LOCK
The lock is installed inside of a protected zone on wooden and metal gates, opening inwards or outwards, single or double leaf swinging or sliding ones.
All structural elements have increased strength and resistance to corrosion. Deflection of gate leaves is balanced relative to each other during seasonal fluctuations of the ground. Deadbolt is released (locked) remotely. Control sensors of crossbar position “Open / Close” and locking mechanism “Locked / Received”. It can be emergency released (locked) with a key from the inside of a protected zone.
www.rosatom.ru
1 2 3 4 5 6 7 8
Build.1, Prospect Mira Str., Zarechny, Penza region 442965, Russia
Tel.: +7 (841-2) 65-48-66 65-47-45 Fax: +7(841-2) 65-48-02
www.nikiret.com