no exception taken 04 rejected 18/16 note...

Planning, Development & Facilities 349 Magnolia Avenue

Glendale, California 91204 Tel: 818.507.0201 Fax: 818.507.4911

Project Name: Jefferson ES-12 Classroom BldgDSA No:

District PO No: District Contract No: 113-15/16

TRANSMITTAL

To: Tony Barrios

From: Chalmers Construction Services Inc.

TR No.

Date:

We are Send ing You: V ia : These a re Transmi t ted as Checked Be low:

Subm i t t a l s eM a i l F o r App r ov a l No E x c ep t i on s T ak en

P r i n t s M a i l F o r You r U s e M ake Co r r e c t i on s N o t ed

T r a c i ng s M es s enge r A s R eques t ed R ev i s e and R e subm i t

S p ec i f i c a t i on s Hand Fo r R ev i ew & C ommen t R e j e c t ed

S amp l e s Sp ec i a l D e l i v e r y U se / D i s t r i b u t i on O t he r

Cop y o f L e t t e r F a x F o r You r I n f o r ma t i on

Change O rd e r

O t he r

Copies Date Doc. No.

Description

Remarks:

Issued By: Ara Baghdasarians

Copies To:

A#:03-114361 , File#:19-41

024

04/18/16

1 04/18/16 Submittal #24 ( 220553 )

NO EXCEPTION TAKEN REJECTED NOTE MARKINGS REVISE AND RESUBMIT

Review is for general conformance with the design concept and Contract Documents. If any deviations from the Contract Documents are included herein, such deviations shall be presumed by the Contractor as not having been reviewed, except where specific attention is called to the change as a deviation. Markings or comments shall not be construed as relieving the Contractor from compliance with the project plans and specifications. The Contractor is responsible for details and accuracy; confirming and correlating all quantities and dimensions; fabrication processes and techniques of construction; coordination of this work with that of all other trades and the satisfactory performance of this work.

…. By Teagan Castellon May 03, 2016

H. L. Moe Co., Inc. MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MEO-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE

5 2 6 C o m m e r c i a l S t . • G l e n d a l e , C A . 9 1 2 0 3 • 8 1 8 . 5 7 2 . 2 1 0 0 • F A X 8 1 8 . 5 7 2 . 2 1 7 0

C a l i f o r n i a S t a t e L i c e n s e N o . 2 5 4 6 7 8 – S i n c e 1 9 2 7

SSSuuubbbmmmiiittttttaaalll PPPaaaccckkkaaagggeee

for

Thomas Jefferson Elementary School Glendale, CA

Division 22 – Plumbing

Submitter:

H. L. Moe Co., Inc.

Date: April 8, 2016

Submittal No: 05 –Identification for Plumbing Piping & Equipment

By: AR

PPPllluuummmbbbiiinnnggg SSSuuubbbmmmiiittttttaaalll

Thomas Jefferson Elementary School

MOE-MOE-MOE-MOE-MOE-MOE-MEO-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MEO-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE-MOE

Page 22 05 53 ◊ Identification for Plumbing Piping & Equipment

Sub. No.: 01 Page 1 of 1

PART 2 PRODUCTS

2.01 IDENTIFICATION

A. Pipe Markers: Marking Services, Kolbi, Craft Mark B. Valve Tags: Marking Services, Kolbi, Craft Mark C. Equipment Signs: Marking Services, Kolbi, Craft Mark

1.1 1.9 1.13

John Soler 05/03/2016

MS-900 SELF ADHESIVE PIPE MARKERSDESCRIPTIONMS-900 self-adhesive pipe markers and tapes are premium grade vinyl with an acrylicpressure-sensitive adhesive. They are used to provide indoor or outdoor line servicedesignations and system color-coding. Flow directional arrow tape or individual arrowmarkers are used with pipe markers to indicate direction of flow. In addition MS-900 colorcoding tape can be used to provide a system color code.

LABEL SIZES AND LETTER HEIGHTSMS-900 pipe markers will conform to the ASME A13.1 "Scheme for the Identification ofPiping Systems" with regard to label colors, overall size and letter height.

Marker Size Pipe Diameter Marker Style Color Field Letter Height1" x 8" ¾" thru 2-¼" A 8" long ¾”2-¼" x 13" 2-½" thru 7-7/8" B 13" long 1-¾”4" x 24" 8 thru 10" C 24" long 2-½”4" x 32" over 10" D 32" long 3-½”

Marker Size Pipe Diameter Marker Style Color Field Letter Height25mm x 200mm 19mm thru 57mm A 200mm long 19mm57mm x 330mm 63mm thru 200mm B 330mm long 42mm100mm x 610mm 201 thru 250mm C 610mm long 63mm100 x 813mm over 250mm D 813mm long 90mm

***Directional flow arrows are available in individual arrow markers that are the samewidth and one-half the length of the pipe markers or 1” (25 mm), 2” (51 mm), & 4” (102mm) x 30 yds (27 m) arrow tape rolls***

Film: .0032" (0.0812 mm) thick PVC Adhesive: permanent pressure-sensitive acrylicApplication Temperature: +50°F (10°C) Service TemperatureRange: -50 to +180°F (-45 to 82°C)

Water Resistance: ExcellentOutdoor Durability: Five years when properly applied

Storage Stability: Two years when stored at + 73°F (22°C) and 50% relativehumidity

Chemical Resistance: Resistant to acids, alkalies and salts

TECHNICAL DATA

800.234.0135 414.973.1331 Fax/800.627.6432 www.markserv.com MARKING SERVICES, INC.

Information on physical and chemical characteristics is based on tests we believe to be reliable. The values are intended only as a source of informationand are given without guarantee and do not constitute a warranty. Purchasers should independently determine, prior to use, the suitability of thismaterial for their specific application.Created on 4/8/2011

2.01 A - Pipe Markers

Page 1.1

Classification Color Description Swatch

Materials Inherently HazardousFlammable or Explosive Black on Yellow XChemically Active or Toxic Black on Yellow XExtreme Temperatures or Pressures Black on Yellow XRadioactive Black on Yellow X

Materials of Inherently Low HazardGas or Gaseous Admixture White on Blue XLiquid or Liquid Admixture White on Green X

Fire Quenching MaterialsWater, Foam, CO2, Halon, etc. White on Red X

Designation of Colors (ASME A13.1-1996)

Classification Color Description SwatchFire Quenching Materials White on Red XToxic and Corrosive Fluids Black on Orange XFlammable Fluids Black on Yellow XCombustible Fluids White on Brown XPotable, Cooling, Boiler Feed, and Other Water White on Green XCompressed Air White on Blue XTo be defined by the user White on Purple XTo be defined by the user Black on White XTo be defined by the user White on Grey XTo be defined by the user White on Black X



Page 1.2

MS-970 COILED PLASTIC PIPE MARKERS DESCRIPTIONMS-970 coiled plastic pipe markers are designed to identify piping in a wide variety ofenvironments. They stay in place on pipes due to the memory of the coiling process andtherefore do not rely on a pressure-sensitive adhesive. No preparation of the pipe surfaceis required for application, so installation time is reduced compared to conventionalstick-on marker systems. Legends are sub-surface printed so they are protected by a layerof plastic.

Ideal for rusty, dirty or sweating pipes where adhesive markers cannot be used.

No pipe surface preparation needed.

Coiled construction quickly snaps around pipe.

Self-locking strip keeps marker in place even on vertical pipes.

Markers can be removed during line maintenance, then re-installed.

Standard and custom legends available.

Flow direction arrows are printed on each marker.

Complies with ASME A13.1 standard for pipe identification with regard to color, letterheight and marker size.

ATTACHING NYLON STRAPSTwo nylon straps are provided with Style F and G, and three for H Markers. The straps areprovided in a 36” length for Style F and G and a 48” length for the Style H markers. Theywill fit around a 20” pipe. For larger pipe diameters, simply connect 2 straps together toform a permanent attachment.

Nylon Strap Part Numbers36” Nylon Straps #1578648” Nylon Straps #15787

PHYSICAL PROPERTIES

Materials: 20 mil .020” (0.508 mm) Vinyl ServiceTemperature Range: -40°F to 160°F (71°C)Chemical Resistance: Water Resistance: ExcellentAlkalis (mild): GoodMildew: GoodApplication: Recommended for indoor useASME A13.1 Standard: Complies

Flow Direction Arrows: Yes

TECHNICAL DATA



Page 1.3

MARKER SIZES

Pipe Style Marker Character MarkerDiameter Marker Width Height Type1/4” – 3/8” TM 3 ” 1 / 4 ” coi l -on1/2" – 1” A 8 ” 1 / 2 ” coi l -on1 - 1 / 8 ” – 2 - 1 / 4 ” B 8 ” 3 / 4 ” coi l -on2 - 3 / 8 ” – 3 - 1 / 4 ” C 12” 1 - 1 / 4 ” coi l -on3 - 3 / 8 ” – 4 - 1 / 2 ” D 12” 1 - 1 / 4 ” coi l -on4 - 5 / 8 ” – 5 - 7 / 8 ” E 12” 1 - 1 / 4 ” coi l -on6” – 7-7/8” F 12” 1 - 1 / 4 ” strap-on8” – 10” G 24” 2 - 1 / 2 ” strap-onOver 10” H 32” 3 - 1 / 2 ” strap-on

Pipe Style Marker Character MarkerDiameter Marker Width Height Type6.35 – 9.5 mm TM 76.2 mm 6.35mm coi l-on12.7 – 25.4 mm A 203.2 mm 13 mm coi l-on28.58 – 57.15 mm B 203.2 mm 19 mm coi l-on60.33 – 88 mm C 305 mm 32 mm coi l-on85.73 – 114 mm D 305 mm 32 mm coi l-on111 – 150 mm E 305 mm 32 mm coi l-on152 – 200 mm F 305 mm 32 mm strap-on203 – 254 mm G 610 mm 64 mm strap-onOver 254 mm H 813 mm - -


Page 1.4

Classification Color Description Swatch

Materials Inherently HazardousFlammable or Explosive Black on Yellow XChemically Active or Toxic Black on Yellow XExtreme Temperatures or Pressures Black on Yellow XRadioactive Black on Yellow X

Materials of Inherently Low HazardGas or Gaseous Admixture White on Blue XLiquid or Liquid Admixture White on Green X

Fire Quenching MaterialsWater, Foam, CO2, Halon, etc. White on Red X


Classification Color Description SwatchFire Quenching Materials White on Red XToxic and Corrosive Fluids Black on Orange XFlammable Fluids Black on Yellow XCombustible Fluids White on Brown XPotable, Cooling, Boiler Feed, and Other Water White on Green XCompressed Air White on Blue XTo be defined by the user White on Purple XTo be defined by the user Black on White XTo be defined by the user White on Grey XTo be defined by the user White on Black X



Page 1.5

www.kolbipipemarkers.com

416 Campus DriveArlington Heights, IL 60004800-499-8450 fax 800-596-3057KOLBI

Since 1970...

Pipe Marker Co.

PIPE MARKERS ♦ ENGRAVED NAMEPLATESVALVE TAGS ♦ MEDICAL MARKERS

416 Campus DriveArlington Heights, IL 60004

www.kolbipipemarkers.com800-499-8450 fax 800-596-3057

PIPE MARKERS ♦ VALVE TAGS ♦ ENGRAVED NAMEPLATESKOLBISince 1970...

Pipe Marker Co.

HOT WATER SUPPLYHOT WATER SUPPLY

HOT WATER SUPPLY

Product SpecificationWrap Around Pipe Marker

Pipe OD" (include insulation) Letter Size or Style

3/4" to 1" coiled 1/2" WA 1-1/8" to 2-3/8" coiled 3/4" WB 2-1/2" to 3-1/4" coiled 1-1/4" WC 3-3/8" to 4-1/2" coiled 1-1/4" WD 4-5/8" to 5-7/8" coiled 1-1/4" WE

6" to 7-7/8" flat 1-1/4" WF* 8" to 10 " flat 2-1/2" WG*

greater than 10 " flat 3-1/2" WH* * shipped flat with nylon ties included

Flammable or Explosive Chemically active or Toxic Extreme temperature/pressure Radioactive

Materials Inherently Dangerous

Materials of Inherently Low

Hazard

Fire Quenching Materials

Water, Foam, C02, Halon

Liquid or liquid admixture

Gas or gaseous admixture

White Letters

White LettersWhite

Letters

Black Fluid Service Background Color

Letter Color

Colors and Letters

Fire quenching fluids Safety Red White LETTERSToxic and corrosive fluids Safety Orange Black LETTERSFlammable liquids Safety Yellow Black LETTERSCombustible fluids Safety Brown White LETTERSPotable,cooling,boiler feed,other water Safety Green White LETTERSCompressed air Safety Blue White LETTERSTo be defined by user Safety Purple White LETTERSTo be defined by user Safety White Black LETTERSTo be defined by user Safety Gray White LETTERSTo be defined by user Safety Black White LETTERS

2007 ANSI A13.1 Color Designation1996 ANSI A13.1 Color Designation

Letters

Samples available upon request

Ink: UV Resistant

5-7 year outdoor life

Arrows included on all markers

360° visibility (sizes WA - WE)

Material: Sizes WA through WB .015 semi rigid colored vinyl

Compliance: Meets ANSI A13.1 standard for letter sizeand length of marker

Nylon Straps provided with styles WF - WH

Sizes WC through WH .030 semi rigid colored vinyl


Page 1.6

SpecmarkTM Precoiled Pipe Markers

•Custom Specmark •Specmark Sizes •Stock Legends •Specmark Technical Data Sheet

Standard Legend Pricing

● Specify stock number.● Specify quantity of each.● Combine all stock legends and styles for

best price break.● Contact factory for 500+pricing.● In Stock Legends Ship NEXT DAY. Other

standard legends, ship within 3 working days.

STYLE 1-99 100-249

250-499

AA 1.80 1.60 1.45

A 1.85 1.65 1.50

B 2.35 2.10 1.95

C 5.10 4.60 3.65

D 5.30 4.75 4.00

E 5.45 4.90 4.15

F 5.45 4.90 4.15

G 7.90 7.10 6.10

H 10.75 9.70 8.20

SpecmarkTM Precoiled Plastic Markers save installation time and labor costs! Craftmark's SpecmarkTM conforms 100% to ASME (ANSI) A13.1 "Scheme for the Identification of Piping Systems". We use only the most durable materials and UV screen inks. These Durable markers are used on wet, oily, cold, dirty, or rusty pipes. where pressure sensitives won't stick! No preparation of the pipe surface is required before application so valuable labor time is saved!

FEATURES ● Meets ASME (ANSI) A13.1 100%● No pipe preparation necessary.● 360o visibility.● Installs quickly in new and existing facilities.● Can be removed and re-used.● Markers come with pre-printed arrows.● Choose from over 175 stock legends.● Available in six standard coiled sizes.● Sizes F-H supplied with black nylon UV stabilized ties.● Sizes to fit 3/8" thru 40".● Coiled plastic is lightweight yet durable.● Coiled marker snaps around pipe with ease.● Heavy 20 mil vinyl on Sizes A,B,F,G, H.● Super Heavy-duty 30 mil vinyl on sizes C, D, E.● Custom available with no set-up charges or hidden minimum

orders. Order 1 with no set-up charge!

Craftmark's Pre-coiled Markers

file:///G|/SUBMITTAL%20-%20CAT/Craft%20Mark/specmark.html (1 of 2)3/28/2006 5:31:07 PM

Page 1.7


Craftmark's Pre-coiled Markers

Customer Service Phone Numbers Toll Free Voice (800) 627-5255 Toll Free Fax (800) 889-3147 Local Voice (817) 457-8753 Local Fax (817) 451-0637

E-mail [email protected] Business Hours

Monday-Friday 8:00 AM CST to 5:00 PM CST Site Map

Links Map

US Headquarters 3212 S. Cravens Rd. P.O. Box 50668

Fort Worth, TX 76119 Fort Worth, TX 76105 Credit Cards Accepted:

Site inspected by Lynx. Read and Review Craftmark's Limit of Liability Statement.

copyright © 2005 CRAFTMARK FT. WORTH, TX - All Rights Reserved

file:///G|/SUBMITTAL%20-%20CAT/Craft%20Mark/specmark.html (2 of 2)3/28/2006 5:31:07 PMPage 1.8

SUBMITTAL / TECHNICAL INFORMATION

BRASS VALVE TAGS

• 18 Gauge Material Thickness, 0.040 “ thick

• 1.5” round tags

• Tags are stamped and black-filled

• ¼” Service Indicator – top line

• ½” Numbers – bottom line

• 3/16” Mounting Hole

• Custom sizes, shapes and gauges

available by special order

¼” Service Line ½” Number line

PLBG

001

3/16” hole Solid brass "S" hooks, #16 brass jack chain, #6 solid brass bead chain, nylon ties, lead meter seals or zinc snap hooks are available to attach valve tags. Each is a tough, sturdy, and corrosion resistant fastener.

356 S. Miraleste Drive, Unit 324 San Pedro, CA 90732 Ph: (951) 836-1134 Fax: (310) 514-9358

Email: [email protected] Internet: www.markserv.com

2.01 B - Valve Tags

Page 1.9

BRASS VALVE TAGSDESCRIPTIONUse brass valve tags to tag valves, instruments, small piping, cables or fugitive emissionlocations. Solid brass "S" hooks, #16 brass jack chain, #6 solid brass bead chain, nylonties, lead meter seals or zinc snap hooks are available to attach valve tags. Each is a tough,sturdy, and corrosion resistant fastener.

*Stamped and black-filled*Packaged in sets of 25 consecutive numbers *Custom sizes, shapes and gauges available by special order

PHYSICAL PROPERTIES

Standard Material: BrassStandard Thickness: 20 gauge (0.032” thick (0.812 mm))Optional Thickness: Available on requestStandard Colors: BRASS (BLACK text)Non-standard Colors: Additional text colors available on requestMounting: Ø3/16” (Ø4,8mm) default diameterFinish: Matte finishText Height: 1/4” service indicator on the top line & 1/2” #'s on bottom line Available Characters: 1/8” Text , # / \ " - . ' ° ( ) A thru Z - all upper case & 0 thru 9 1/4” Text , # / \ " - . ' & ° A thru Z - all upper case & 0 thru 9Typical sizes (H x W): 1.5” (38 mm) diameter 1.5” x 1.5” (38 mm x 38 mm) 2” (51 mm) diameter 2” x 2” (51 mm x 51 mm) 1 x 3” (25 mm x 76 mm) Other (specify: height x width)

The Maximum # of characters per line Tag Size Max # 1/4" char Max No Lines

1.5" rnd & sq w/ 3 - ½ #'s 5 12" rnd & sq w/ 3 - ½ #'s 1st line 5, 2nd 6 21.5" rd - characters only 1st line 4, 2nd 5, 3rd 4 31.5" sq - characters only 5 32" rd & sq- characters only 1st line 6, 2nd 7, 3rd 6 3 Tag Size Max # 1/8" char Max No Lines1.5" rnd & sq w/ 3 - ½ #'s 8 22" rnd & sq w/ 3 - ½ #'s 8 31.5" rd & sq- characters only 8 3

2" rd & sq - characters only 1 0 3

TECHNICAL DATA



Page 1.10



Since 1970...

Pipe Marker Co.





Pipe Marker Co.

Brass Valve Tags

Product Specifications

Also available:Stainless Steel (.030) LaseredEngraved Plastic (2-sided engraving available)Anodized Aluminum (.020) Lasered

Dimension: 1-1/2” Sq.

HW

253/16” centered hole

1/4” alpha characters (5 max)

1/2” numbers (3 max)

1-1/2”

2”

3/16” centered hole

1/4” alpha characters (6 max)

1/2” numbers (4 max)

Dimension: 2” Sq.

Samples available upon request.

Shapes available:Square CircleOctagon Triangle

HW

1369

Material: Half Hard 19 gauge brass ( 70% Copper, 30% Zinc)

Method: Stamped and Black filled (other fill colors: red, white, yellow)

Dimensions: 1-1/2” & 2”

Page 1.11

2.01 B - Valve Tags

Craftmark's Standard Abbreviation Brass Tags

•Valve Tags & Markers •Custom Valve Tags •Stock Numbered Valve Tags •Anodized Aluminum Tags •Blank Valve Tags •Engraved Plastic Tags •DURAMAX Valve Tags •DURAMAX Barcoded Tags •DURAMAX Glow In The Dark Tag •Blank Plastic Tags •Durametal Barcoded Valve Tag •Aluminum Foil Write-On Tags •Fiberglass Valve Tags •Ceiling Tack Valve Markers

CRAFTMARK standard abbreviation tags are the economical choice when the job requires commonly used phrases and numbers only. Available in round and square 1 1/2"& 2".

TO ORDER SPECIFY: 1. SIZE2. SHAPE3. LEGEND/NUMBER SEQUENCE4. BLACK FILLED OR NATURAL

ROUND SQUARE

1 1/2 in. and 2" Round and Square Valve Tags

STANDARD ABBREVIATIONS AC, CHW, CHWS, CHWR, COND, CW, GAS, HTG, HW, HVAC, HWR,

HWS, LPS, MPS, MPC, PLBG, SPK, STM

SIZE/SHAPE 25-99 100-249 250-499 500+

1 1/2" RND. .65 .59 .53 .54

1 1/2" SQ. .65 .59 .53 .49

2" RND. .95 .86 .79 .75

2" SQ. .95 .86 .79 .75

Craftmark STD Abrevation Brass Valve Tags

file:///G|/SUBMITTAL%20-%20CAT/Craft%20Mark/vtstdabbreviation.html (1 of 2)3/28/2006 5:27:30 PM

Page 1.12

2.01 B - Valve Tags

ENGRAVED PLASTIC VALVE AND EQUIPMENT TAGSDESCRIPTIONValve and equipment identification tags are engraved on two (2-ply) or three (3-ply)layers of permanently bonded ABS/acrylic plastic. Thickness of material is either 1/16 inchor 1/8 inch, and engraved information clearly shows against background color.

PHYSICAL & CHEMICAL CHARACTERISTICS

Standard Material: 2-ply (two laminated layers of engraving plastic)Optional Material: 3-ply (three laminated layers of engraving plastic)Standard Thickness: 1/16” (1,6mm)Optional Thickness: 1/8” (3,2mm)Service Temperature: -20°F through 175°F (-28°C through 79°C)Standard Colors: BLACK (WHITE text) GREEN (WHITE text) RED (WHITE text) BLUE (WHITE text) BROWN (WHITE text) WHITE (BLACK text) YELLOW (BLACK text) ORANGE (BLACK text)Non-standardColors: Additional colors available on request

Mounting: Adhesive backing and/or holes: Ø3/16” (Ø4,8 mm) defaultdiameter

Finish: Matte finish with beveled edgesText Height: Sized to fit within tag boundary or comply with specified heightTypical sizes (H x W): 1.5” (38 mm) diameter 1.5” x 1.5” (38 x 38 mm) 2” (51 mm) diameter 2” x 2” (51 x 51 mm) 3/4 x 2-1/2” (19 x 64 mm) 1 x 2-1/2” (25 x 64 mm) 1 x 3” (25 x 76 mm) 1-1/2 x 4” (38 x 102 mm) 2 x 4” (51 x 102 mm) 2 x 6” (51 x 152 mm) 2 x 8” (51 x 203 mm) 4 x 6” (102 x 152 mm) Other (specify: height x width)

TECHNICAL DATA



2.01 C - Equipment Signs

Page 1.13



Since 1970...

Pipe Marker Co.





Pipe Marker Co.

Product Specifications

Brass Nameplates

Material thickness: .035

Standard sizes:

1” x 2”

2” x 4”

1” x 3”

3” x 5”

Method of printing: laser

Lettering size: as required

Each nameplate has 2 holes

AHU-1

KOLBISince 1970...

PIPE MARKER Co.416 W. Campus Dr Arlington Heights, IL 60004 (800)499-8450 fax (800)596-3057 www.kolbipipemarkers.com

PIPE MARKERS VALVE TAGS ENGRAVED NAMEPLATES

Product Specification

Engraved Plastic Nameplates

Standard material: 1/16” rigid 2-ply blended acrylic extruded sheet with cap and core permanently fused together. Material is shatterproof and chip resisitant. Meets ASTM D 709 Type I spec.

Other available materials: Outdoor 3-ply (for 2 sided engraving) 1/8” thick

Nameplates are available in various sizes, letters, and layouts to meet customer requirements.

Expected life: Indefinite for interior applications

Standard Colors (letters/background): white/black, black/white, white/green, green/white, white/blue, blue/white, white/red, red/white, black/yellow. Additional colors availble per user specifications.

ABC

ABC

ABC

ABC

ABC

ABC

ABC

ABC

ABC

Nameplates have beveled edges and either adhesive backing or holes

Available in sizes to 18” x 24”

Samples available per request.

Excel spreadsheet .xls and Adobe .pdf files are acceptable.

Page 1.14

2.01 C - Equipment Signs