A natural stone quartzite with silver, gold and grey tones that

compliments transitional, modern and traditional environments.

OLD SPRUC E MOU N TA I N™

1. OLD SPRUCE MOUNTAIN™ STRIP CUT THINSTONE™ 2. OLD SPRUCE MOUNTAIN™ IRREGULAR FLAGGING 3. OLD SPRUCE MOUNTAIN™ ASHLAR CUT THINSTONE™

2

1

3

PHOTO CREDIT: VERNON SWABACK, SWABACK PARTNERS PLLC

PHOTO CREDIT: RICH IN MEMORIES PHOTOGRAPHY

*Please Note:Our natural stone products vary in color over time. All stone product photos shown may not be representative of our current stone lots. Request a sample for the current color range available.

www.connecticutstone.com

Milford - 203-882-1000

Stamford - 203-967-2937

Old Spruce Mountain™Classification: Natural Stone Quartzite

Fabrication: Guillotine cut rough edge-standard production face

Installation Instructions: Standard masonry veneer procedure

Gross material coverage is exclusive of any waste and assumes a standard ¾" joint width. Expect a minimum 10% – 15% waste factor. If standard joint width is less than ¾", then expect a 20% – 25% waste factor.

ThinStone™ is a special cut of our traditional veneer specifically engineered for interior and exterior applications over brick, concrete or plywood. On average, ThinStone™ is up to 5 times thinner than traditional veneer. Less weight results in lower shipping costs, easier installation and minimal to no footing requirements.

ASTM DATA: Average results for ASTM tests C-170, C-99, and C-97

Density (lbs. / CF)

Water AbsorptionCompressive

Strength Perpendicular

Compressive Strength Parallel

Modulus of Rupture

Bulk Specific Gravity

159.74 0.70% 12,920 PSI 6,920 PSI 2,340 —

Pattern Bed Depth Coverage (Average) Facing Area Sold by

Coping ± 3" to ± 5" ±25 LF per TN 12" x 14" to 18" x 20" TN

Ledge Cut Veneer ± 3.5" to ± 5" ±30 SF per TN 1.5" x 8" to 3" x 20" TN

Mosaic Veneer ± 3.5" to ± 5" ±30 SF per TN 10" x 10" to 18" x 24" TN

Sawn Bed Veneer ± 3" to ± 5" ±30 SF per TN 2" x 8" to 12" x 24" TN

Square Cut Veneer ± 3.5" to ± 5" ±30 SF per TN 6" x 8" to 16" x 18" TN

Strip Cut Veneer ± 3.5" to ± 5" ±30 SF per TN 3" x 8" to 5" x 24" TN

Semi-Square Flagging ± 1.5" to ± 3" ±55 SF per TN 10" x 10" to 18" x 18" TN

Large Irregular Flagging ± 2" to ± 4" ±45 SF per TN 12" x 18" to 36" x 36" TN

Stepping Stones ± 4" to ± 18" — 24" x 24" to 36" x 48" TN

Wallstone ± 2" to ± 14" ±15 CF per TN 6" x 6" to 18" x 18" TN

Pattern Bed Depth Facing Area Sold by Pallet Size

Ledge Cut Veneer .75" to 1.25" 1" x 3" to 4" x 13" SF 100 or 240 SF

Mosaic Veneer .75" to 1.25" 6" x 6" to 12" x 18" SF 100 or 240 SF

Square Cut Veneer .75" to 1.25" 4" x 4" to 12" x 18" SF 100 or 240 SF

Strip Cut Veneer .75" to 1.25" 3" x 6" to 6" x 16" SF 100 or 240 SF

Corners .75" to 1.25" 3" to 12" Returns LF 50 or 100 LF