oryx - basf

16
This label is compliant with the CPA Voluntary Initiative Guidance Supplied by: BASF plc Crop Protection PO Box 4, Earl Road Cheadle Hulme, CHEADLE Cheshire SK8 6QG Tel: 0161 485 6222 Emergency Information: (24 hours freephone): 0049 180 2273112 Technical Enquiries: 0845 602 2553 (office hours) MAPP 13527 A suspension concentrate containing 83 g/l (7.2 % w/w) quinmerac and 333 g/litre (29.5 % w/w) metazachlor. A residual herbicide for the control of a range of broad‑leaved and grass weeds, including cleavers, in winter oilseed rape. The (COSHH) Control of Substances Hazardous to Health Regulations may apply to the use of this product at work. ® = registered trademark of BASF Oryx ® 10 L 81091123GB1104 SAFETY PRECAUTIONS Operator protection Engineering control of operator exposure must be used where reasonably practicable in addition to the following personal protective equipment: WEAR SUITABLE PROTECTIVE CLOTHING (COVERALLS), SUITABLE PROTECTIVE GLOVES AND FACE PROTECTION (FACESHIELD) when handling the concentrate. WEAR SUITABLE PROTECTIVE GLOVES when handling contaminated surfaces. However, engineering controls may replace personal protective equipment if a COSHH assessment shows they provide an equal or higher standard of protection. TAKE OFF IMMEDIATELY all contaminated clothing. WHEN USING DO NOT EAT, DRINK OR SMOKE. WASH CONCENTRATE from skin or eyes immediately DO NOT BREATHE SPRAY. WASH HANDS AND EXPOSED SKIN before meals and after work. Environmental protection Do not contaminate surface waters or ditches with chemical or used container. DO NOT ALLOW DIRECT SPRAY from horizontal boom sprayers to fall within 5m of the top of the bank of a static or flowing waterbody, unless a Local Environmental Risk Assessment for Pesticides (LERAP) permits a narrower buffer zone, or within 1m of the top of a ditch which is dry at the time of application. Aim spray away from water. This product qualifies for inclusion within the Local Environmental Risk Assessment for Pesticides (LERAP) scheme. Before each spraying operation from a horizontal boom sprayer, either a LERAP must be carried out in accordance with CRD’s published guidance or the statutory buffer zone must be maintained. The results of the LERAP must be recorded and kept available for inspection for three years. KEEP LIVESTOCK out of treated areas until poisonous weeds such as ragwort have died and become unpalatable. Storage and disposal Keep dry and frostproof in a suitable pesticide store. KEEP AWAY FROM FOOD, DRINK AND ANIMAL FEEDING STUFFS KEEP OUT OF REACH OF CHILDREN KEEP IN ORIGINAL CONTAINER tightly closed, in a safe place. RINSE CONTAINER THOROUGHLY by using an integrated pressure rinsing device or manually rinsing three times. Add washings to sprayer at time of filling and dispose of safely. ~xmam1415220132.indd 1 05.11.2014 21:42:15

Upload: others

Post on 07-Feb-2022

18 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Oryx - BASF

This label is compliant with the CPA Voluntary Initiative Guidance

Supplied by:BASF plcCrop ProtectionPO Box 4, Earl RoadCheadle Hulme, CHEADLECheshire SK8 6QGTel: 0161 485 6222Emergency Information:(24 hours freephone): 0049 180 2273112Technical Enquiries: 0845 602 2553 (office hours)

MAPP 13527A suspension concentrate containing 83 g/l (7.2 % w/w) quinmerac and 333 g/litre (29.5 % w/w) metazachlor.A residual herbicide for the control of a range of broad‑leaved and grass weeds, including cleavers, in winter oilseed rape.The (COSHH) Control of Substances Hazardous to Health Regulations may apply to the use of this product at work.

® = registered trademark of BASF

Oryx®

10 L ℮

8109

1123

GB1

104

SAFETY PRECAUTIONS Operator protectionEngineering control of operator exposure must be used where reasonably practicable in addition to the following personal protective equipment:WEAR SUITABLE PROTECTIVE CLOTHING (COVERALLS), SUITABLE PROTECTIVE GLOVES AND FACE PROTECTION (FACESHIELD) when handling the concentrate.WEAR SUITABLE PROTECTIVE GLOVES when handling contaminated surfaces.However, engineering controls may replace personal protective equipment if a COSHH assessment shows they provide an equal or higher standard of protection.TAKE OFF IMMEDIATELY all contaminated clothing.WHEN USING DO NOT EAT, DRINK OR SMOKE.WASH CONCENTRATE from skin or eyes immediatelyDO NOT BREATHE SPRAY.

WASH HANDS AND EXPOSED SKIN before meals and after work. Environmental protectionDo not contaminate surface waters or ditches with chemical or used container.DO NOT ALLOW DIRECT SPRAY from horizontal boom sprayers to fall within 5m of the top of the bank of a static or flowing waterbody, unless a Local Environmental Risk Assessment for Pesticides (LERAP) permits a narrower buffer zone, or within 1m of the top of a ditch which is dry at the time of application. Aim spray away from water. This product qualifies for inclusion within the Local Environmental Risk Assessment for Pesticides (LERAP) scheme. Before each spraying operation from a horizontal boom sprayer, either a LERAP must be carried out in accordance with CRD’s published guidance or the statutory buffer zone must be maintained. The results of the LERAP

must be recorded and kept available for inspection for three years.KEEP LIVESTOCK out of treated areas until poisonous weeds such as ragwort have died and become unpalatable.Storage and disposalKeep dry and frostproof in a suitable pesticide store.KEEP AWAY FROM FOOD, DRINK AND ANIMAL FEEDING STUFFSKEEP OUT OF REACH OF CHILDRENKEEP IN ORIGINAL CONTAINER tightly closed, in a safe place.RINSE CONTAINER THOROUGHLY by using an integrated pressure rinsing device or manually rinsing three times. Add washings to sprayer at time of filling and dispose of safely.

~xmam1415220132.indd 1 05.11.2014 21:42:15

Page 2: Oryx - BASF

Oryx®

A suspension concentrate containing 83 g/l quinmerac and 333 g/litre metazachlor

WARNING:MAY CAUSE AN ALLERGIC SKIN REACTION.SUSPECTED OF CAUSING CANCER.VERY TOXIC TO AQUATIC LIFE WITH LONG LASTING EFFECTS.

AVOID BREATHING MIST.WEAR PROTECTIVE GLOVES/CLOTHING.IF EXPOSED OR CONCERNED: CALL A POISON CENTRE OR DOCTOR/PHYSICIAN.COLLECT SPILLAGE.STORE LOCKED UP.DISPOSE OF CONTENTS/CONTAINER TO A LICENSED HAZARDOUS-WASTE DISPOSAL CONTRACTOR OR COLLECTION SITE EXCEPT FOR EMPTY CLEAN CONTAINERS WHICH CAN BE DISPOSED OF AS NON-HAZARDOUS WASTE.

To avoid risks to human health and the environment, comply with the instructions for use

IMPORTANT INFORMATIONFOR USE ONLY AS AN AGRICULTURAL HERBICIDE, as directed below:CROPS: Winter oilseed rapeMAXIMUM TOTAL DOSE : 3.0 litres product/hectare/cropLATEST TIMING: End of January in the year of harvest

Other specific restrictions:A maximum total dose of not more than 1000 g metazachlor/hectare may be applied in a three-year period on the same field.

This product is approved under the Control of Pesticides Regulations 1986

READ THE LABEL BEFORE USE. USING THIS PRODUCT IN A MANNER THAT IS INCONSISTENT WITH THE LABEL MAY BE AN OFFENCE. FOLLOW THE CODE OF PRACTICE FOR USING PLANT PROTECTION PRODUCTS.

~xmam1415220132.indd 2 05.11.2014 21:42:16

Page 3: Oryx - BASF

DIRECTIONS FOR USE

IMPORTANT: This information is approved as part of the Product Label. All instructions within this section must be read carefully in order to obtain safe and successful use of this product.

Oryx is a residual herbicide that can be used on all varieties of winter-sown oilseed rape for the control of cleavers and a range of other broad-leaved and grass weeds.

1. Restrictions/Warnings

When Oryx is applied pre-emergence, it is important for crop safety to ensure physical separation of the herbicide from the seed.This is achieved by ensuring that the seed is well covered with soil to a depth of 15 mm.With direct-drilled crops, harrow across the slits to cover the seed before spraying. Loose or puffy seedbeds must be consolidated before treatment.

Seedbeds should be moist, firm and free from clods.

Oryx is suitable for use on all soil types as defined by Soil Texture (85) System, except sands and very light soils and soils containing more than 10% organic matter.

On brashy and stony soils, Oryx may cause some reduction in crop vigour and/or plant stand, due to the chemical moving down to the root zone too quickly.

Do not apply Oryx to soils with a compaction layer or to poorly drained soils, since damage can occur under waterlogged conditions.

If Oryx is applied onto a dry soil surface it will only be effective after rain has occurred.

To reduce the risk of movement of Oryx to water:-a. On clay soils, create a fine, consolidated seedbed to slow the downward movement of water.b. Do not apply Oryx to dry soil. Moist soils have fewer and smaller cracks.c. Do not apply Oryx if heavy rain is forecast, wait until after the event.

A reduction in crop vigour, weed control and possibly plant stand may occur if excessive rain falls shortly after application, particularly on the lighter soils. Where a crop check has occurred, this normally grows out after a few weeks and yields are normally unaffected.

Do not use on broadcast crops.

Do not overlap spray swaths, particularly on headlands.

Do not treat crops which are suffering from wilting, pests or diseases.

Under frosty conditions a transient scorch may occur.

Avoid spray drift onto neighbouring crops.

Consult Processors before use.

~xmam1415220132.indd 3 05.11.2014 21:42:16

Page 4: Oryx - BASF

2. Weed ControlHerbicidal activity is dependent upon root uptake.2.1 Susceptibility of weeds to single applications of Oryx.Weed Name Pre‑emergence category Maximum susceptible stage post‑emergence

3.0 L/ha 3.0 L/haBlack-grass S Pre-emChickweed, Common S Cotyledon Cleavers S 2 whorlsCranesbill, Cut-leaved MR –Dead-nettle, Red S Cotyledon MSForget-me-not, Field S Pre-emFumitory, Common MS Cotyledon MSGroundsel S Pre-emKnotgrass R –Mayweed spp. S 4 lvsMeadowgrass, Annual S Pre-emPansy, Field MS –Parsley, Fool’s S CotyledonParsley Piert S Pre-emPenny-cress, Field R –Poppy, Common S 2 lvsShepherd‘s-purse S Pre-emSowthistle, Perennial* S Cotyledon to 1 leafSpeedwell, Common field S 2 lvs

S = Susceptible; Pre-em = Pre-emergence of weed;MS = Moderately Susceptible; – = No informationMR = Moderately Resistant;R = Resistant;* Only plants from seed of this species are controlled

2.2 ResistanceStrains of some annual grasses (e.g. black-grass, wild-oats, and Italian rye-grass) have developed resistance to herbicides which may lead to poor control. A strategy for preventing and managing such resistance should be adopted. Guidelines have been produced by the Weed Resistance Action Group and copies are available from the HGCA, CPA, your distributor, crop adviser or product manufacturer.

3. CropsOryx can be used on all varieties of winter-sown oilseed rapeOryx may be applied pre- or post-emergence of the crop but for maximum activity application must be pre-emergence of the weeds.Pre‑crop emergence applications should be made on medium and heavy soils only (as defined by the ADAS Soil Texture (85) System). Applications should be made before the crop seed chits, which in warm moist soils may occur within 48 hours of drilling. Seedbeds should be moist, firm and free from clods, but also see Restrictions/Warnings section. DO NOT USE ON BROADCAST CROPS.DO NOT USE Oryx pre-crop emergence when any of the following conditions apply:-• Whenheavyrainisforecast• Drycloddyseedbeds

~xmam1415220132.indd 4 05.11.2014 21:42:16

Page 5: Oryx - BASF

• Latedrilledcrops–asaguide thesearecropsdrilled later than the firstweek inSeptember inNorthernEnglandandScotland and later than mid September in the rest of the UK.

• Stonysoils,i.e.stones,flintsorchalk,readilyvisibleonthesoilsurface.Post‑crop emergence applications can be made on light, medium and heavy soils (as defined by the ADAS Soil Texture (85) System). Applications can be made from when the majority of the crop has two fully expanded cotyledons until before the end of January. The soil should be moist at application, or rainfall must occur shortly after application, but also see Restrictions/Warnings section.Post emergence application of Oryx is recommended if:-• Seedbedconditionsarenotidealforpre-emergenceuse• Theseedisnotcoveredwith15mmofsoil(aswithbroadcastcrops)• Oryxcouldnotbeappliedbeforetheseedcropchits• Lightsoils,orallrecommendedsoilswhicharestony,brashyorgravely,aretobetreated,particularlyifheavyrainfallhas

been forecast for the period following drilling• Latedrilledcropsaretobetreated

4. Following CropsAny crop can follow normally harvested winter oilseed rape treated with Oryx. Ploughing is not essential before sowing a following cereal crop, but is required for other crops.In the event of crop failure in the autumn or winter, then only the crops listed below can be drilled after the use of Oryx:Re-drilling the following spring - spring barley and potatoes may be sown after ploughing.

5. Mixing and SprayingApply 3.0 litres/hectare Oryx.Apply as a MEDIUM spray, as defined by BCPC.Oryx should be applied in a minimum water volume of 220 litres/hectare.Do not use filters finer than 50 mesh.SHAKE WELL BEFORE USE.Half fill the spray tank with clean water and start the agitation.Pour in the required amount of Oryx.Add the remainder of the water and continue agitation until spraying is completed.Rinse empty containers thoroughly and add rinsings to the spray tank.Do not overlap spray swaths, particularly on headlands.Avoid spray drift onto neighbouring crops.WASH EQUIPMENT thoroughly immediately after use.Fill the tank with clean water and leave overnight.Spray out before storage or using other products.Traces of the product may cause damage to susceptible crops sprayed later.

The following does not form part of the product label under the Control of Pesticides Regulations 1986.With many products there is a general risk of resistance developing to the active ingredients. For this reason a change in activity cannot be ruled out. It is generally impossible to predict with certainty how resistance may develop because there are so many crop and use connected ways of influencing this. We therefore have to exclude liability for damage or loss attributable to any such resistance that may develop. To help minimise any loss in activity the BASF recommended rate should in all events be adhered to.Numerous, particularly regional or regionally attributable, factors can influence the activity of the product. Examples include weather and soil conditions, crop plant varieties, crop rotation, treatment times, application amounts, admixture with other products, appearance of organisms resistant to active ingredients and spraying techniques. Under particular conditions a change in activity or damage to plants cannot be ruled out. The manufacturer or supplier is therefore unable to accept any liability in such circumstances. All goods supplied by us are of high grade and we believe them to be suitable, but as we cannot exercise control over their mixing or use or the weather conditions during and after application, which may affect the performance of the material, all conditions and warranties, statutory or otherwise, as to the quality or fitness for any purpose of our goods are excluded and no responsibility will be accepted by us for any damage or injury whatsoever arising from their storage, handling, application or use; but nothing should be deemed to exclude or restrict any liability upon us which cannot be excluded or restricted under the provisions of the Unfair Contract Terms Act 1977 or any similar applicable law.

~xmam1415220132.indd 5 05.11.2014 21:42:16

Page 6: Oryx - BASF

Section 6 of the Health and Safety at Work Act Additional Product Safety Information The product label provides information on a specific pesticidal use of the product; do not use otherwise, unless you have assessed any potential hazard involved, the safety measures required and that the particular use has “off‑label” approval or is otherwise permitted under the Control of Pesticides Regulations.The information on this label is based on the best available information including data from test results

SECTION 1: Identification of the substance/mixture and of the company/undertaking1.1. Product identifier

ORYX1.2. Relevant identified uses of the substance or mixture and uses advised againstRelevant identified uses: crop protection product, herbicide

1.3. Details of the supplier of the safety data sheetCompany:BASF SE67056 LudwigshafenGERMANY

Contact address:BASF plcPO Box 4, Earl Road, Cheadle Hulme,Cheadle, CheshireSK8 6QG, UNITED KINGDOM

Telephone: +44 161 485-6222E-mail address: [email protected]

1.4. Emergency telephone numberInternational emergency number: Telephone: +49 180 2273-112

SECTION 2: Hazards Identification2.1. Classification of the substance or mixtureAccording to Regulation (EC) No 1272/2008 [CLP]Skin Sens. 1Carc. 2Aquatic Acute 1Aquatic Chronic 1

According to Directive 67/548/EEC or 1999/45/ECCarc. Cat. 3

Possible Hazards:Limited evidence of a carcinogenic effect. May cause sensitization by skin contact.Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. For the classifications not written out in full in this section the full text can be found in section 16.

2.2. Label elementsGlobally Harmonized System (GHS) in accordance with UK regulations.Pictogram:

Signal Word:Warning

Hazard Statement:H317 May cause an allergic skin reaction.H351 Suspected of causing cancer.H400 Very toxic to aquatic life.H410 Very toxic to aquatic life with long lasting effects.

~xmam1415220132.indd 6 05.11.2014 21:42:16

Page 7: Oryx - BASF

EUH401 To avoid risks to human health and the environment, comply with the instructions for use.

Precautionary Statements (Prevention):P261 Avoid breathing mist.P280 Wear protective gloves/clothing.

Precautionary Statements (Response):P308 + P311 IF exposed or concerned: Call a POISON CENTER or doctor/physician.P391 Collect spillage.

Precautionary Statements (Storage):P405 Store locked up.

Precautionary Statements (Disposal):P501 Dispose of contents/container to a licensed hazardous-waste disposal contractor or collection site except for

empty clean containers which can be disposed of as non-hazardous waste.

According to Regulation (EC) No 1272/2008 [CLP]Hazard determining component(s) for labelling: METAZACHLOR

According to Directive 67/548/EEC or 1999/45/ECClassification/labelling in accordance with UK regulations.

Hazard symbol(s)Xn Harmful.

N Dangerous for the environment.

R-phrase(s)R40 Limited evidence of a carcinogenic effect.R43 May cause sensitization by skin contact.R50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

S-phrase(s)S2 Keep out of the reach of children.S13 Keep away from food, drink and animal feeding stuffs.S20/21 When using do not eat, drink or smoke.S23.1 Do not breathe spray.S24 Avoid contact with skin.S35 This material and its container must be disposed of in a safe way.S36 Wear suitable protective clothing.S46 If swallowed, seek medical advice immediately and show this container or label.S57 Use appropriate container to avoid environmental contamination.

2.3. Other hazardsAccording to Regulation (EC) No 1272/2008 [CLP]See section 12 – Results of PBT and vPvB assessment.

If applicable information is provided in this section on other hazards which do not result in classification but which may contribute to the overall hazards of the substance or mixture.

SECTION 3: Composition/Information on Ingredients3.1. SubstancesNot applicable

3.2. MixturesChemical naturecrop protection product, herbicide, suspension concentrate (SC)

Hazardous ingredients (GHS)according to Regulation (EC) No. 1272/2008

~xmam1415220132.indd 7 05.11.2014 21:42:16

Page 8: Oryx - BASF

2-Chloro-N-(2,6-dimethylphenyl)-N-(1H-pyrazol-1-ylmethyl)acetamideContent (W/W): 29.5 % Skin Sens. 1BCAS Number: 67129-08-2 Carc. 2EC-Number: 266-583-0 Aquatic Acute 1 Aquatic Chronic 1 H317, H351, H400, H410 M-factor acute: 100 M-factor chronic: 100

8-Quinolinecarboxylic acid, 7-chloro-3-methyl-Content (W/W): 7.3 % Aquatic Chronic 3CAS Number: 90717-03-6 H412EC-Number: 402-790-6REACH registration number:01- 0000015252-80

phenolsulfonic acid-formaldehyde-polycondensate as sodium saltContent (W/W): < 5 % Eye Dam./Irrit. 2 Aquatic Chronic 3 H319, H412

Propane-1,2-diolContent (W/W): < 10 %CAS Number: 57-55-6EC-Number: 200-338-0REACH registration number:01- 2119456809-23

Hazardous ingredientsaccording to Directive 1999/45/EC

2-Chloro-N-(2,6-dimethylphenyl)-N-(1H-pyrazol-1-ylmethyl)acetamideContent (W/W): 29.5 %CAS Number: 67129-08-2EC-Number: 266-583-0Hazard symbol(s): Xn, NR-phrase(s): 40, 43, 50/53Carc. Cat. 3

8-Quinolinecarboxylic acid, 7-chloro-3-methyl-Content (W/W): 7.3 %CAS Number: 90717-03-6EC-Number: 402-790-6REACH registration number: 01-0000015252-80R-phrase(s): 52/53

phenolsulfonic acid-formaldehyde-polycondensate as sodium saltContent (W/W): < 5 %R-phrase(s): 52/53

Propane-1,2-diolContent (W/W): < 10 %CAS Number: 57-55-6EC-Number: 200-338-0REACH registration number: 01-2119456809-23

For the classifications not written out in full in this section, including the indication of danger, the hazard symbols, the R phrases, and the hazard statements, the full text is listed in section 16.

SECTION 4: First‑Aid Measures4.1. Description of first aid measuresShow container, label and/or safety data sheet to physician.

If inhaled: Keep patient calm, remove to fresh air, seek medical attention.

On skin contact: Wash thoroughly with soap and water.

On contact with eyes: Wash affected eyes for at least 15 minutes under running water with eyelids held open.

~xmam1415220132.indd 8 05.11.2014 21:42:17

Page 9: Oryx - BASF

On ingestion: Do not induce vomiting unless told to by a poison control centre or doctor. Never induce vomiting or give anything by mouth if the victim is unconscious or having convulsions.

4.2. Most important symptoms and effects, both acute and delayedSymptoms: The most important known symptoms and effects are described in the labelling (see section 2) and/or in section 11. Further important symptoms and effects are so far not known.

4.3. Indication of any immediate medical attention and special treatment needed Treatment: Treat according to symptoms (decontamination, vital functions), no known specific antidote.

SECTION 5: Fire‑Fighting Measures5.1. Extinguishing mediaSuitable extinguishing media:water spray, foam, dry powder, carbon dioxide

5.2. Special hazards arising from the substance or mixturecarbon monoxide, hydrogen chloride, Carbon dioxide, nitrogen oxides, organochloric compounds The substances/groups of substances mentioned can be released in case of fire.

5.3. Advice for fire‑fightersSpecial protective equipment:Wear self-contained breathing apparatus and chemical-protective clothing.

Further information:Collect contaminated extinguishing water separately, do not allow to reach sewage or effluent systems. Dispose of fire debris and contaminated extinguishing water in accordance with official regulations. In case of fire and/or explosion do not breathe fumes. Keep containers cool by spraying with water if exposed to fire.

SECTION 6: Accidental Release Measures6.1. Personal precautions, protective equipment and emergency proceduresDo not breathe vapour/spray. Use personal protective clothing. Avoid contact with the skin, eyes and clothing.

6.2. Environmental precautionsDo not allow contamination of public drains or surface or ground waters. Inform local water plc if spillage enters drains and the Environment Agency (England & Wales), the Scottish Environmental Protection Agency (Scotland), or the Environment and Heritage Service (Northern Ireland) if it enters surface or ground waters. Keep people and animals away.

6.3. Methods and material for containment and cleaning upFor small amounts: Pick up with suitable absorbent material (e.g. sand, sawdust, general-purpose binder, kieselguhr).For large amounts: Dike spillage. Pump off product.Dispose of absorbed material in accordance with regulations. Collect waste in suitable containers, which can be labelled and sealed. Clean contaminated floors and objects thoroughly with water and detergents, observing environmental regulations.

6.4. Reference to other sectionsInformation regarding exposure controls/personal protection and disposal considerations can be found in section 8 and 13.

SECTION 7: Handling and Storage7.1. Precautions for safe handlingNo special measures necessary if stored and handled correctly. Ensure thorough ventilation of stores and work areas. When using do not eat, drink or smoke. Hands and/or face should be washed before breaks and at the end of the shift.

Protection against fire and explosion:No special precautions necessary. The substance/product is non-combustible. Product is not explosive.

7.2. Conditions for safe storage, including any incompatibilitiesSegregate from foods and animal feeds.Further information on storage conditions: Keep away from heat. Protect from direct sunlight.

Protect from temperatures below: -10 °CThe product crystallizes below the limit temperature. Protect from temperatures above: 40 °CChanges in the properties of the product may occur if substance/product is stored above indicated temperature for extended periods of time.

7.3. Specific end use(s)For the relevant identified use(s) listed in Section 1 the advice mentioned in this section 7 is to be observed.

~xmam1415220132.indd 9 05.11.2014 21:42:17

Page 10: Oryx - BASF

SECTION 8: Exposure Controls/Personal Protection8.1. Control parametersComponents with occupational exposure limits57-55-6: Propane-1,2-diol

TWA value 10 mg/m3 (WEL/EH 40 (UK)), ParticulateTWA value 474 mg/m3 ; 150 ppm (WEL/EH 40 (UK)), Total vapour and particulates

Refer to the current edition of HSE Guidance Note EH40 Occupational Exposure Limits (United Kingdom). For normal use and handling refer to the product label/leaflet. In all other cases the following apply.

8.2. Exposure controlsPersonal protective equipmentRespiratory protection:Suitable respiratory protection for higher concentrations or long-term effect: Combination filter forgases/vapours of organic, inorganic, acid inorganic and alkaline compounds (e.g. EN 14387 Type ABEK).Hand protection: Suitable chemical resistant safety gloves (EN 374) also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) and other Manufacturer‘s directions for use should be observed because of greta diversity of types.Eye protection: Safety glasses with side-shields (frame goggles) (e.g. EN 166)Body protection: Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).General safety and hygiene measuresThe statements on personal protective equipment in the instructions for use apply when handling crop-protection agents in final-consumer packing. Wearing of closed work clothing is recommended. Store work clothing separately. Keep away from food, drink and animal feeding stuffs.

SECTION 9: Physical and Chemical Properties9.1. Information on basic physical and chemical propertiesForm: suspensionColour: off-whiteOdour: faint specific odour, aromaticOdour threshold: Not determined due to potential health hazard by inhalation.pH value: approx. 4 – 6 (20 °C)crystallization temperature: approx. -4.3 °Cboiling temperature: approx. 100 °C Information applies to the solvent.Flash point: No flash point – Measurement made (Directive 92/69/EEC, A.9) up to the boiling point.Evaporation rate: not applicableFlammability: not highly flammable (Directive 92/69/EEC, A.12)Lower explosion limit: As a result of our experience with this product and our knowledge of its composition we do not expect any

hazard as long as the product is used appropriately and in accordance with the intended use.Upper explosion limit: As a result of our experience with this product and our knowledge of its composition we do not expect any

hazard as long as the product is used appropriately and in accordance with the intended use.Ignition temperature: 555 °C (Directive 92/69/EEC, A.15)Vapour pressure: approx. 23 hPa (20 °C) Information applies to the solvent.Density: approx. 1.13 g/cm3 (OECD Guideline 109) (20 °C)Relative vapour density (air): not applicableSolubility in water: dispersibleInformation on: 2-Chloro-N-(2,6-dimethylphenyl)-N-(1H-pyrazol-1-ylmethyl)acetamidePartitioning coefficient n-octanol/water (log Kow): 2.13 (22 °C)Information on: 8-Quinolinecarboxylic acid, 7-chloro-3-methyl-Partitioning coefficient n-octanol/water (log Kow): -1.41 (OECD Guideline 117) (21 °C; pH value: 7)----------------------------------

~xmam1415220132.indd 10 05.11.2014 21:42:17

Page 11: Oryx - BASF

Thermal decomposition: 150 °C, 200 J/g (DSC (OECD 113)) 250 °C, 10 J/g (DSC (OECD 113)) 285 °C, 90 J/g (DSC (OECD 113))Viscosity, dynamic: approx. 39 mPa.s (OECD 114) (20 °C, 100 1/s)Explosion hazard: not explosive (Directive 92/69/EEC, A.14)Fire promoting properties: not fire-propagating

9.2. Other informationOther Information:If necessary, information on other physical and chemical parameters is indicated in this section.

SECTION 10: Stability and Reactivity10.1. ReactivityNo hazardous reactions if stored and handled as prescribed/indicated.10.2. Chemical stabilityThe product is stable if stored and handled as prescribed/indicated.10.3. Possibility of hazardous reactionsNo hazardous reactions if stored and handled as prescribed/indicated.10.4. Conditions to avoidSee MSDS section 7 – Handling and storage.10.5. Incompatible materialsSubstances to avoid:strong acids, strong bases, strong oxidizing agents10.6. Hazardous decomposition productsHazardous decomposition products:No hazardous decomposition products if stored and handled as prescribed/indicated.

SECTION 11: Toxicological Information11.1. Information on toxicological effectsAcute toxicityAssessment of acute toxicity:Of low toxicity after single ingestion. Virtually nontoxic after a single skin contact. Virtually nontoxic by inhalation. The product has not been tested. The statement has been derived from substances/products of a similar structure or composition.

Experimental/calculated data:LD50 rat (oral): 4,070 mg/kg (OECD Guideline 401)

LC50 rat (by inhalation): > 5.7 mg/l 4 h (OECD Guideline 403)

LD50 rat (dermal): > 2,000 mg/kg (OECD Guideline 402)

IrritationAssessment of irritating effects:Not irritating to the eyes. Not irritating to the skin.

Experimental/calculated data:Skin corrosion/irritation rabbit: non-irritant (OECD Guideline 404)The product has not been tested. The statement has been derived from substances/products of a similar structure or composition.

Serious eye damage/irritation rabbit: non-irritant (OECD Guideline 405)The product has not been tested. The statement has been derived from substances/products of a similar structure or composition.

Respiratory/Skin sensitizationAssessment of sensitization:Sensitization after skin contact possible. The product has not been tested. The statement has been derived from the properties of the individual components.

Information on: 2-Chloro-N-(2,6-dimethylphenyl)-N-(1H-pyrazol-1-ylmethyl)acetamide Experimental/calculated data:Guinea pig maximization test guinea pig: skin sensitizing (similar to OECD guideline 406)----------------------------------

~xmam1415220132.indd 11 05.11.2014 21:42:17

Page 12: Oryx - BASF

Germ cell mutagenicityAssessment of mutagenicity:The product has not been tested. The statement has been derived from the properties of the individual components. Mutagenicity tests revealed no genotoxic potential.CarcinogenicityAssessment of carcinogenicity:The product has not been tested. The statement has been derived from the properties of the individual components.Information on: 2-Chloro-N-(2,6-dimethylphenyl)-N-(1H-pyrazol-1-ylmethyl)acetamide Assessment of carcinogenicity:Indication of possible carcinogenic effect in animal tests.----------------------------------Reproductive toxicityAssessment of reproduction toxicity:The product has not been tested. The statement has been derived from the properties of the individual components. The results of animal studies gave no indication of a fertility impairing effect.Developmental toxicityAssessment of teratogenicity:The product has not been tested. The statement has been derived from the properties of the individual components. Animal studies gave no indication of a developmental toxic effect at doses that were not toxic to the parental animals.Repeated dose toxicity and Specific target organ toxicity (repeated exposure)Assessment of repeated dose toxicity:The product has not been tested. The statement has been derived from the properties of the individual components.Information on: 2-Chloro-N-(2,6-dimethylphenyl)-N-(1H-pyrazol-1-ylmethyl)acetamideAssessment of repeated dose toxicity:Repeated exposure to large quantities may affect certain organs.----------------------------------Other relevant toxicity informationMisuse can be harmful to health.

SECTION 12: Ecological Information12.1. ToxicityAssessment of aquatic toxicity: Very toxic to aquatic organisms. May cause long-term adverse effects in the aquatic environment.Toxicity to fish: LC50 (96 h) approx. 22 mg/l, Oncorhynchus mykiss (OPP 72-1 (EPA-Guideline), static)The product has not been tested. The statement has been derived from substances/products of a similar structure or composition.Aquatic invertebrates: EC50 (48 h) > 100 mg/l, Daphnia magna (OECD Guideline 202, part 1)The product has not been tested. The statement has been derived from substances/products of a similar structure or composition.Aquatic plants: EC50 (72 h) 0.043 mg/l (growth rate), Pseudokirchneriella subcapitata (OECD Guideline 201)The product has not been tested. The statement has been derived from substances/products of a similar structure or composition.12.2. Persistence and degradabilityAssessment biodegradation and elimination (H2O):The product has not been tested. The statement has been derived from the properties of the individual components.Information on: 2-Chloro-N-(2,6-dimethylphenyl)-N-(1H-pyrazol-1-ylmethyl)acetamideAssessment biodegradation and elimination (H2O):Not readily biodegradable (by OECD criteria).Information on: 8-Quinolinecarboxylic acid, 7-chloro-3-methyl-Assessment biodegradation and elimination (H2O):Not readily biodegradable (by OECD criteria).----------------------------------12.3. Bioaccumulative potentialAssessment bioaccumulation potential:The product has not been tested. The statement has been derived from the properties of the individual components.Information on: 2-Chloro-N-(2,6-dimethylphenyl)-N-(1H-pyrazol-1-ylmethyl)acetamide Bioaccumulation potential:No significant accumulation in organisms is expected as a result of the distribution coefficient of n- octanol/water (log Pow).Information on: 8-Quinolinecarboxylic acid, 7-chloro-3-methyl- Bioaccumulation potential:Because of the n-octanol/water distribution coefficient (log Pow) accumulation in organisms is not to be expected.----------------------------------

~xmam1415220132.indd 12 05.11.2014 21:42:17

Page 13: Oryx - BASF

12.4. Mobility in soilAssessment transport between environmental compartments:Adsorption in soil: The product has not been tested. The statement has been derived from the properties of the individual components.Information on: 2-Chloro-N-(2,6-dimethylphenyl)-N-(1H-pyrazol-1-ylmethyl)acetamideAssessment transport between environmental compartments:Adsorption in soil: Following exposure to soil, the product trickles away and can – dependant on degradation - be transported to deeper soil areas with larger water loads.Information on: 8-Quinolinecarboxylic acid, 7-chloro-3-methyl-Assessment transport between environmental compartments:Adsorption in soil: Following exposure to soil, the product trickles away and can – dependant on degradation - be transported to deeper soil areas with larger water loads.----------------------------------12.5. Results of PBT and vPvB assessmentThe product does not contain a substance fulfilling the PBT (persistent/bioaccumulative/toxic) criteria or the vPvB (very persistent/very bioaccumulative) criteria.12.6. Other adverse effectsThe product does not contain substances that are listed in Regulation (EC) 1005/2009 on substances that deplete the ozone layer.12.7. Additional informationOther ecotoxicological advice:Do not discharge product into the environment without control.

SECTION 13: Disposal Considerations13.1. Waste treatment methodsMust be sent to a suitable incineration plant, observing local regulations.The UK Environmental Protection (Duty of Care) Regulations (EP) and amendments should be noted (United Kingdom).This product and any uncleaned containers must be disposed of as hazardous waste in accordance with the 2005 Hazardous Waste Regulations and amendments (United Kingdom).Contaminated packaging:Contaminated packaging should be emptied as far as possible and disposed of in the same manner as the substance/product.

SECTION 14: Transport InformationLand transportADRUN number UN3082UN proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (contains METAZACHLOR)Transport hazard class(es): 9, EHSMPacking group: IIIEnvironmental hazards: yesSpecial precautions for user: Tunnel code: ERIDUN number UN3082UN proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (contains METAZACHLOR)Transport hazard class(es): 9, EHSMPacking group: IIIEnvironmental hazards: yesSpecial precautions for user: None knownInland waterway transportADNUN number UN3082UN proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (contains METAZACHLOR)Transport hazard class(es): 9, EHSMPacking group: IIIEnvironmental hazards: yes

~xmam1415220132.indd 13 05.11.2014 21:42:17

Page 14: Oryx - BASF

Special precautions for user: None knownTransport in inland Not evaluatedwaterway vessel:Sea transportIMDGUN number: UN 3082UN proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (contains METAZACHLOR)Transport hazard class(es): 9, EHSMPacking group: IIIEnvironmental hazards: yesMarine pollutant: YESSpecial precautions for user: None knownAir transportIATA/ICAOUN number: UN 3082UN proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (contains METAZACHLOR)Transport hazard class(es): 9, EHSMPacking group: IIIEnvironmental hazards: yesSpecial precautions for user: None known

14.1. UN numberSee corresponding entries for “UN number” for the respective regulations in the tables above.14.2. UN proper shipping nameSee corresponding entries for “UN proper shipping name” for the respective regulations in the tables above.14.3. Transport hazard class(es)See corresponding entries for “Transport hazard class(es)” for the respective regulations in the tables above.14.4. Packing groupSee corresponding entries for “Packing group” for the respective regulations in the tables above.14.5. Environmental hazardsSee corresponding entries for “Environmental hazards” for the respective regulations in the tables above.14.6. Special precautions for userSee corresponding entries for “Special precautions for user” for the respective regulations in the tables above.14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC CodeRegulation: Not evaluatedShipment approved: Not evaluatedPollution name: Not evaluatedPollution category: Not evaluatedShip Type: Not evaluated

Further informationThis product is subject to the most recent edition of “The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations” and their amendments (United Kingdom).

SECTION 15: Regulatory Information15.1. Safety, health and environmental regulations/legislation specific for the substance or mixtureTo avoid risks to man and the environment, comply with the instructions for use.

The data should be considered when making any assessment under the Control of Substances Hazardous to Health Regulations (COSHH), and related guidance, for example, ‘COSHH Essentials’ (United Kingdom).This product is classified under the Chemicals (Hazard Information and Packaging) Regulations, (CHIP) (United Kingdom).This product may be subject to the Control of Major Accident Hazards Regulations (COMAH), and amendments if specific threshold tonnages are exceeded (United Kingdom).

15.2. Chemical Safety AssessmentAdvice on product handling can be found in sections 7 and 8 of this safety data sheet.

~xmam1415220132.indd 14 05.11.2014 21:42:17

Page 15: Oryx - BASF

SECTION 16: Other InformationFor proper and safe use of this product, please refer to the approval conditions laid down on the product label.

Full text of the classifications, including the indication of danger, the hazard symbols, the R phrases, and the hazard statements, if mentioned in section 2 or 3:Xn Harmful.N Dangerous for the environment.40 Limited evidence of a carcinogenic effect.43 May cause sensitization by skin contact.50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.Skin Sens. Skin sensitizationCarc. CarcinogenicityAquatic Acute Hazardous to the aquatic environment – acuteAquatic Chronic Hazardous to the aquatic environment - chronicEye Dam./Irrit. Serious eye damage/eye irritationCarc. Cat. 3 Carcinogenic substances Category 3: Substances which cause concern for man owing to possible carcinogenic

effects.H317 May cause an allergic skin reaction.H351 Suspected of causing cancer.H400 Very toxic to aquatic life.H410 Very toxic to aquatic life with long lasting effects.H412 Harmful to aquatic life with long lasting effects.H319 Causes serious eye irritation.

If you have any queries relating to this MSDS, it’s contents or any other product safety related questions, please write to the following e-mail address: [email protected]

The data contained in this safety data sheet are based on our current knowledge and experience and describe the product only with regard to safety requirements. The data do not describe the product’s properties (product specification). Neither should any agreed property nor the suitability of the product for any specific purpose be deduced from the data contained in the safety data sheet. It is the responsibility of the recipient of the product to ensure any proprietary rights and existing laws and legislation are observed.

(Version 5.0)

~xmam1415220132.indd 15 05.11.2014 21:42:17

Page 16: Oryx - BASF

This label is compliant with the CPA Voluntary Initiative Guidance

Supplied by:BASF plcCrop ProtectionPO Box 4, Earl RoadCheadle Hulme, CHEADLECheshire SK8 6QGTel: 0161 485 6222Emergency Information:(24 hours freephone): 0049 180 2273112Technical Enquiries: 0845 602 2553 (office hours)

MAPP 13527A suspension concentrate containing 83 g/l (7.2 % w/w) quinmerac and 333 g/litre (29.5 % w/w) metazachlor.A residual herbicide for the control of a range of broad‑leaved and grass weeds, including cleavers, in winter oilseed rape.The (COSHH) Control of Substances Hazardous to Health Regulations may apply to the use of this product at work.

® = registered trademark of BASF

Oryx®

10 L ℮

8109

1123

GB1

104

SAFETY PRECAUTIONS Operator protectionEngineering control of operator exposure must be used where reasonably practicable in addition to the following personal protective equipment:WEAR SUITABLE PROTECTIVE CLOTHING (COVERALLS), SUITABLE PROTECTIVE GLOVES AND FACE PROTECTION (FACESHIELD) when handling the concentrate.WEAR SUITABLE PROTECTIVE GLOVES when handling contaminated surfaces.However, engineering controls may replace personal protective equipment if a COSHH assessment shows they provide an equal or higher standard of protection.TAKE OFF IMMEDIATELY all contaminated clothing.WHEN USING DO NOT EAT, DRINK OR SMOKE.WASH CONCENTRATE from skin or eyes immediatelyDO NOT BREATHE SPRAY.

WASH HANDS AND EXPOSED SKIN before meals and after work. Environmental protectionDo not contaminate surface waters or ditches with chemical or used container.DO NOT ALLOW DIRECT SPRAY from horizontal boom sprayers to fall within 5m of the top of the bank of a static or flowing waterbody, unless a Local Environmental Risk Assessment for Pesticides (LERAP) permits a narrower buffer zone, or within 1m of the top of a ditch which is dry at the time of application. Aim spray away from water. This product qualifies for inclusion within the Local Environmental Risk Assessment for Pesticides (LERAP) scheme. Before each spraying operation from a horizontal boom sprayer, either a LERAP must be carried out in accordance with CRD’s published guidance or the statutory buffer zone must be maintained. The results of the LERAP

must be recorded and kept available for inspection for three years.KEEP LIVESTOCK out of treated areas until poisonous weeds such as ragwort have died and become unpalatable.Storage and disposalKeep dry and frostproof in a suitable pesticide store.KEEP AWAY FROM FOOD, DRINK AND ANIMAL FEEDING STUFFSKEEP OUT OF REACH OF CHILDRENKEEP IN ORIGINAL CONTAINER tightly closed, in a safe place.RINSE CONTAINER THOROUGHLY by using an integrated pressure rinsing device or manually rinsing three times. Add washings to sprayer at time of filling and dispose of safely.

~xmam1415220132.indd 16 05.11.2014 21:42:18