paintless dent removal method works like a charm
TRANSCRIPT
Paintless Dent Removal method works like a charm
No matter how careful you are with your car, it gets dented one way or the other at some point in time. Carless drivers, trolleys from super markets, children from neighborhood even your own children can cause smallest of dents, but even the smallest of dents can ruin the picture perfect finish of your car. Removing dents used to be an expensive and tedious process, which involved painting and sanding, but the times have changed now. The new process of removing dents known as paintless dent removal can do the job for you without costing you much with respect to time and money.
Awareness of Paintless Dent Removal
Many professionals have been making use of paintless dent removal method for over a decade now, but most of the common people are still not aware of it. Dents or dents as big as a soccer ball can be taken care of without any need of repainting.
RefinedAs paintless dent removal is becoming more and more refined, it is being widely accepted too. Some insurance companies have started to cover paintless dent removal’s cost, as it is significantly less than the traditional method. One of the reasons why this method has gained so much popularity is because manufacturers have started using much stronger metals, which has allowed this method to develop.
Limitation on size of dentThis method also has its limitations; this method can be applied to dents that are small in size or as large as the size of a soccer ball. As this particular method is dependent on metals that are stronger so it is not suitable for vehicles manufactured before the 90s. Dents, too close to the edge or already repaired panels will not yield the same results. There are dents that will not be completely fixed, but smoothened out to an extent that they are difficult to spot.
Trained professionalsThis method cannot be performed by anyone out there; it takes a lot of skills and requires trained professionals. Special tools are required in order to push the metal back in to its original place. Technicians access the panels by removing inner panels or by trimming some pieces from the outside.
PDR-One
Contact Details:
Address: 5889 Kachina Drive Riverside,
CA 92509
Number: (951) 318-1818
Email: [email protected]
Website: http://www.pdr-one.com
Thank you.