panasonic uf-9000-dp-180-190_hb_ver2.0_040628
DESCRIPTION
Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628TRANSCRIPT
![Page 1: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/1.jpg)
Order Number: MGCS040602C0J7
FacsimileUF-9000
DP-180/190
[ Version 2.0 ]
This service information is designed for experienced repair technicians only and is not intended for use by the general public.It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or products dealt within this service information by anyone else could result in serious injury or death.
WARNING
© 2004 Panasonic Communications Co., Ltd. All rights reserved. Unauthorized copying and distribution isa violation of law.
![Page 2: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/2.jpg)
ject to change
vements in
Information regarding Lead-Free (PbF) solder:
Distinction of PbF PCB:PCBs (manufactured) using lead free solder will have a mark following
typically oldering iron Exercise care PCB for too long
100 F/600 C).Ltd.: PbF PCBs.
This Product Uses Lead (Pb) Free Solder Printed Circuit Boards (PCBs).
2
The contents of this Service Handbook and the Specifications are subwithout notice. Panasonic Communications Co., Ltd. reserves the right to make improthe product design without reservation and without notice.Published in Japan.
the PCB part numbers in a label on the PCB. Caution:
Pb free solder has a higher melting point than standard solder; the melting point is 50 - 70 F (30 - 40 C) higher. Please use a s with temperature control and adjust it to 700 20 F (370 10 C). while using higher temperature soldering irons, do not heat the to prevent solder splash or damage to the PCB. Pb free solder will tend to splash when heated too high (about 1 ECO SOLDER M705 (available from Senju Metal Industry Co.,
URL: http://www.senju-m.co.jp) is recommended when repairing
![Page 3: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/3.jpg)
3
Important NoticePlease read this notice completely BEFORE repairing or installing any optional accessories. As failure to properly install the additional board or connector with the power ON could damage the machine's SPC or SC board.Please follow the instructions below:1. It is essential that you turn OFF the Main Power Switch located on the Left Side of the machine.2. It is essential that you unplug the AC Power Cord from the wall outlet. (During a Lightning Storm, to prevent electrocution disconnect the Telephone Line Cable first before unplugging the AC Power Cord.)3. Please read the installation instructions carefully and follow each step.
<Example: UF-9000>
Note:O = Power OFF, l = Power ON
Note:If the Hard Disk Drive Unit is installed, to prevent a Scan Disk Function from beingperformed (similar to Windows OS when the power is abruptly interrupted), it isimportant to follow the step sequence below when turning OFF the Power Switch on themachine.1. If the machine is in the "ENERGY SAVER (Shutdown Mode)", you may turn the Power Switch on the Left Side of the machine to the OFF position. If it is not in the "ENERGY SAVER (Shutdown Mode)", continue to step 2 below.2. Press "FUNCTION" and "ENERGY SAVER" keys simultaneously first.3. Wait approximately 10 seconds while the machine writes the closing status onto the Hard Disk Drive Unit and advances into "ENERGY SAVER MODE".4. Turn the Power Switch on the Left Side of the machine to the OFF position.5. Unplug the AC Power Cord. (During a Lightning Storm, to prevent electrocution disconnect the Telephone Line Cable first before unplugging the AC Power Cord.)
* The specifications are subject to change without notice. Panasonic Communications Co., Ltd. reserves the right to make improvements in the product design without reservation and without notice.
![Page 4: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/4.jpg)
4
Power and Ground Connection Cautions
Ensure that the plug connection is free of dust. In a damp environment, a contaminatedconnector can draw a significant amount of current that can generate heat andeventually cause fire over an extended period of time.
Always use the power cord provided with your machine. When an extension power cordis required, always use a properly rated cord.
120 V/15 A or AC 220 - 240V/10 AIf you use a cord with an unspecified current rating, the machine or plug may emit smokeor become hot to the touch externally.
Do not attempt to rework, pull, bend, chafe or otherwise damage the power cord. Do notplace a heavy object on the cord. A damaged cord can cause fire or electric shocks.
For Your SafetyTo prevent severe injury and loss of life, read this section carefully before servicing the Panasonicmachine to ensure proper and safe operation.Please ensure that the machine is installed near a wall outlet and is easily accessible.
This section explains the graphic symbols used in the machine and/or this manual.
WARNING:Denotes a potential hazard that could result in serious injury or death.
CAUTION:Denotes hazards that could result in minor injury or damage to the machine.
This section also explains the graphic symbols used in the machine and/or this manual.
These symbols are used to alert operators to a specific operating procedurethat must not be performed.
These symbols are used to alert operators to a specific operating procedurethat must be emphasized in order to operate the machine safely.
Installation and Relocation Cautions
Do not place the machine near heaters or volatile, flammable, or combustible materialssuch as curtains that may catch fire.
Do not place the machine in a hot, humid, dusty or poorly ventilated environment.Prolonged exposure to these adverse conditions can cause fire or electric shocks.
Place the machine on a level and sturdy surface that can with stand.If tilted, the machine may tip-over and cause injuries.
When relocating the machine, remove the toner and/or developer, and pack the machine with proper packing materials for shipping.
When moving the machine, be sure to unplug the power cord from the outlet. If themachine is moved with the power cord attached, it can cause damage to the cord whichcould result in fire or electric shock.
Precautions
CAUTION
WARNING
![Page 5: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/5.jpg)
5
Never touch a power cord with wet hands. Danger of electric shock exists.
If the power cord is broken or insulated wires are exposed, replace immediately with a specified cord only.Using a damaged cord can cause fire or electric shocks.
Stop operation immediately if your machine produces smoke, excessive heat, unusual noise, or smell,or if water is spilt onto the machine. These conditions can cause fire. Immediately switch Off andunplug the machine.
Do not disconnect or reconnect the machine while it is on. Disconnecting a live connector can deformthe plug and cause fire.
When disconnecting the machine, grasp the plug instead of the cord. Forcibly pulling on a cord candamage it and cause fire or electric shock.
When the machine is not used over an extended period of time, switch it Off and unplug it. If an unusedmachine is left connected to a power source for a long period, degraded insulation can cause electricshocks, current leakage or fire.
Be sure to switch Off and unplug the machine before accessing the interior of the machine for cleaning,maintenance or fault clearance. Access to a live machines interior can cause electric shock.
Be sure to switch Off and unplug the machine before accessing the interior of the machine foraccessing interface cables, maintenance or fault clearance. Access to a live machines interior cancause electric shock.
Once a month, unplug the machine and check the power cord for the following. If you notice anyunusual condition.
The power cord is plugged firmly into the receptacle.The plug is not excessively heated, rusted, or bent.The plug and receptacle are free of dust.The cord is not cracked or frayed.
OthersThe machine has a built-in circuit for protection against lightning-induced surge current. If lightning strikes in yourneighborhood, switch Off the machine. Disconnect the telephone line cable first, then unplug the power cord from the machine and reconnect only when the lightning storm has stopped.If you notice flickering or distorted images or noises on your audio-visual units, your machine may be causingradio interference. Switch it Off and if the interference disappears, the machine is the cause of the radio interfer-ence. Perform the following procedure until the interference is corrected.
Move the machine and the TV and/or radio away from each other.Reposition or reorient the machine and the TV and/or radio.Unplug the machine, TV and/or radio, and replug them into outlets that operate on different circuits.Reorient the TV and/or radio antennas and cables until the interference stops. For an outdoor antenna, ask your local electrician for support.Use a coaxial cable antenna.
Operating Safeguards
Do not touch areas where these caution labels are attached to the surface may be very hot, and causeserver burns.
Do not place any liquid container such as a vase or coffee cup on the machine. Spilt water can causefire or shock hazard.
Do not place any metal parts such as staples or clips on the machine. If metal and flammable parts getinto the machine, they can short-circuit internal components, and cause fire or electric shocks.
If debris (metal or liquid) gets into the machine, switch Off and unplug the machine.Operating a debris-contaminated machine can cause fire or electric shock.
Do not try to alter the machine configuration or modify any parts. An unauthorized modification cancause smoke or fire.
WARNING
![Page 6: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/6.jpg)
6
Do not place a magnet near the safety switch of the machine. A magnet can activate themachine accidentally resulting in injuries.
Do not use a highly flammable spray or solvent near the machine. It can cause fire.
When copying a thick document, do not use excessive force to press it against thedocument glass. The glass may break and cause injuries.
Never touch a labeled area found on or near the heat roller. You can get burnt. If a sheetof paper is wrapped around the heat roller, do not try to remove it when it is hot, to avoidinjuries or burns. Switch Off the machine immediately, and wait until it cools down.
Do not use conductive paper, e.g. folding paper, carbonic paper and coated paper. Whena paper jam occurs, they can cause a short circuit and fire.
Do not place any heavy object on the machine. An off-balance machine can tip-over orthe heavy object can fall, causing damage and/or injuries.
Keep the room ventilated when using the machine for an extended period of time tominimize the ozone density in the air.
When copying with the document cover open, do not look directly at the exposure lamp.Direct eye exposure can cause eye fatigue or damage.
Pull out paper trays slowly to prevent injuries.
When removing jammed paper, make sure that no pieces of torn paper are left in themachine. A piece of paper remaining in the machine can cause fire. If a sheet of paper iswrapped around the heat roller, or when clearing a jammed paper that is difficult orimpossible to see, do not try to remove it by yourself. Doing so can cause injuries orburns. Switch Off the machine immediately, and wait until it cools down.
CAUTION
Consumable Safeguards
Never throw a toner cartridge into an open flame. Toner remaining in the cartridge cancause an explosion and you can get burnt.
Never throw toner or a waste toner container or a toner cartridge into an open flame. Itcan cause an explosion and you can get burnt.
Keep button batteries out of the reach of children. If a button battery is swallowedaccidentally, get medical treatment immediately.
Never heat the drum cartridge, or scratch its surface. A heated or scratched drum can behazardous to your health.
Do not mix new and old batteries together. Otherwise, batteries can burst or leak,causing fire or injuries.
Be sure to use the specified type of batteries only.
Ensure that batteries are installed with correct polarity. Incorrectly installed batteries canburst or leak, resulting in spillage or injuries.
WARNING
CAUTION
![Page 7: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/7.jpg)
Table of Contents
7
Specifications Table ................................81.1. Copy Function...........................................81.2. Fax, Printer and Internet
Fax Functions .........................................161.3. System Combination...............................261.4. Options List.............................................27
Maintenance, Adjustments and Check Points ..........................................28
2.1. Preventive Maintenance .........................282.2. Required Tools .......................................302.3. Preventive Maintenance Points ..............312.4. Preventive Maintenance Check List .......322.5. Updating the Firmware ...........................332.6. Adjusting the Printer Registration,
LSU Image Side to Side .........................42
Troubleshooting ....................................443.1. Error Codes (For Copier) ........................443.2. Information Code Table
(For Facsimile)........................................51
Service Modes........................................584.1. Service Modes (For Copier)....................584.2. Service Modes (For Facsimile) ...............75
Exploded View & Parts List ................1065.1. Destination Codes ................................1075.2. Control Panel Unit.................................1085.3. Scanner Unit .........................................1125.4. CCD......................................................1145.5. ADF.......................................................1165.6. Cover Assembly....................................1245.7. Right Side Parts....................................1285.8. Motor and Drive Gear Unit....................1325.9. Left Side Parts ......................................1345.10. Rear and Upper Side Parts...................1365.11. Fuser Unit .............................................1385.12. Pickup Roller and
Paper Feed Roller.................................1425.13. Bottom Side Parts.................................1445.14. Mechanical Base ..................................1465.15. Paper Tray ............................................1485.16. 2nd Paper Feed Module .......................1505.17. Paper Tray
(2nd Paper Feed Module).....................1545.18. PC Boards ............................................1565.19. Packing and Accessories......................160
5.20. Printer Controller Module for PCL6 ............................................... 164
5.21. Printer Controller Module for PS/PCL6 ......................................... 166
5.22. 2nd Paper Feed Module Packing and Accessories................................... 168
5.23. Hard Disk Drive Unit............................. 1705.24. Hardware Identification Template ........ 172
Alphanumerical Parts List .................. 174
![Page 8: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/8.jpg)
UF-9000
DP-180/1901 Specifications Table1.1. Copy Function
Copy Function
Items Description RemarksUF-9000 DP-180 / 190
Basic Specifications1 Type Desktop2 Platen Fixed3 Original Position
Platen Left / Rear / Face DownADF Left / Center / Face UP
4 Recording Paper Path Center5 Drum Organic Photo Conductor (OPC)6 Copy Process Electrostatic Indirect Laser
7 Developing Process Mono Component Non Magnetic Dry Toner
8 Toner Recycle No9 Fusing System Heat & Pressure
10 Max Original Size Letter / A4 / Legal Legal: with ADF only11 Paper Size
Paper TrayLetter / Legal For USA and Canada
A4 / A5 For EUA4 / A5 / B5 For Other Destinations
Bypass
Letter / Legal / Invoice For USA and Canada
A4, FLS, A5 For EUFLS = 8 x 13 in, 8.5 x 13 in
A4 / A5 / B5 / Postcard For Other Destinations12 Media Type
Standard Tray Paper / TransparencyOptional Tray Paper
Bypass Paper / Transparency / Envelope / Label / Thick Paper
13 Warm-up Time 68 °F (20 °C)Power Saver Mode Approx. 15 secSleep ModeShutdown Mode Approx. 18 secPower On
14 First Copy Time Approx. 10 sec
Scan: Platen; Size: Letter / A4; Orientation: Portrait;Paper Feed: 1st Paper Tray; Interval: From Pressing of Start Key to paper exiting to the Exit Tray; When LSU is ready.
8JUN 2004Ver. 2.0
![Page 9: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/9.jpg)
UF-9000
DP-180/19015 Copy SpeedLetter Approx. 19 cpm Paper Feed: 1st Paper Tray;
Paper Exit: to Exit Tray; Continuous Copy Mode.A4 Approx. 18 cpm
16 ZoomEnlargement Selected Original size / Copy sizeReduction Selected Original size / Copy sizeZoom 50 - 200% 1% Step
17 Paper Feed Front Loading Universal Paper TrayPaper Tray
Capacity 250 sheets x 1 LTR / A4: 20 lb (75 g/m2)
Low Level Paper Warning Yes Orange Low Paper Level Indicator
Bypass
Capacity 1 sheetPaper / Transparency / Envelope / Label / Thick Paper / Postcard etc.
Paper Capacity (Std. Configuration) 250 sheets
18 Multi Copy Range 999 sheets19 Gradation
Text Bi-LevelText / Photo 256 steps Halftone by Error DiffusionPhoto 256 steps
20 Resolution Scanning and Printing.Scan
Mono Max. 600 x 600 dpiColor Max. 300 x 300 dpi
Print (Mono) Max. 1200 (Interpolated) x 600 dpi
Selectable 600 dpi, with Smoothing, the results are similar to PS3 / PCL6 Printers (1200 dpi Interpolated).
21 Scanning typeColor Scan Yes
Color Depth 24 bit (16.7 Million colors)Mono Scan Yes
22 Standard Sorting Memory Size 16 MB
23 Standard Page Memory Size 32 MB24 Exit Tray Capacity 150 sheets LTR / A4: 20 lb (75 g/m2)25 Dimensions
(W x D x H)
18.2 x 19.9 x 20.6 in (462 x 506 x 523 mm)18.2 x 19.9 x 26.1 in
(462 x 506 x 663 mm)With Optional 2nd Paper Feed Module
Copy Function
Items Description RemarksUF-9000 DP-180 / 190
9JUN 2004Ver. 2.0
![Page 10: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/10.jpg)
UF-9000
DP-180/19026 Operating Space
(W x D) 18.2 x 21.1 x 31.5 in (462 x 536 x 802 mm)
27 Weight 48.5 lb (22 kg)Options
1 Paper Feed System 550 sheets x 1550 sheets2nd Paper Feed Module Yes
Paper Size Detection Manual Control Panel Selectable
Low Level Paper Warning Yes Orange Low Paper Level Indicator
Max. Paper Capacity 800 sheets LTR / A4: 20 lb (75 g/m2)(Tray 1 + 2)
2 Sorting Image MemoryOptional Image Memory 1 (16 MB) Yes Unit comes standard with
16 MB. 1-Slot available for an Optional Image Memory module.
Optional Image Memory 2 (64 MB) Yes
Optional Image Memory 3 (128 MB) Yes
3 Image MemoryExpansion Flash Memory Card, 4 MB Yes
Image Memory for FacsimileExpansion Flash Memory Card, 8 MB Yes
4 Expansion Board Yes Required for PCL and PS Printing.
5 Hard Disk Drive Yes 40 GB (2.5 inch)6 Handset Yes7 PCL Printer Yes Requires the Optional
Expansion Board.
8 PS / PCL Printer Yes Requires the Optional Expansion Board.
9 Accounting Software Yes For Accounting Function10 Deluxe Stand Yes11 Remote Diagnostic Software Yes12 Mechanical Counter Yes Supplied as a Service Part.
Copy Function
Items Description RemarksUF-9000 DP-180 / 190
10JUN 2004Ver. 2.0
![Page 11: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/11.jpg)
UF-9000
DP-180/190Features1 Automatic Features
Auto Magnification Selection NoAuto Paper Selection
Copy NoPrint Yes
Auto Paper Tray Selection Yes
Auto Start Yes Reservation while Power On Initializing
Normal Operation Mode 80 W Turns On the Heater Power.Energy Saver Mode
Power Saver Mode 20 W
Turns Off the Heater Power.Automatically enters the Sleep or Shutdown Mode after 15 minutes from the Standby or Energy Saver Mode.Manually enters the Energy Saver Mode by pressing the Energy Saver key.Sleep or Shutdown mode is controlled by the General Functions setting.
Sleep Mode 12 W (100 VAC PS)15 W (220 VAC PS)
Turns Off the Power of Printer & Scanner.
Shutdown Mode 1.5 W USB / Network Function not available
Transmission (ADF) 45 W (100 VAC PS)56 W (220 VAC PS)
Transmission (Platen) 40 W (100 VAC PS)50 W (220 VAC PS)
Reception / Copy 900 W (100 VAC PS)1000 W (220 VAC PS)
Max 900 W (100 VAC PS)1000 W (220 VAC PS)
Remote Diagnostic YesMachine Stops when Out of Toner Yes
Copy Function
Items Description RemarksUF-9000 DP-180 / 190
11JUN 2004Ver. 2.0
![Page 12: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/12.jpg)
UF-9000
DP-180/1902 Additional FeaturesLow Level Paper indicator YesPhoto Mode Yes 256 stepsOriginal Detection Release NoEdit / Effects
Book Mode NoEdge Mode NoMargin Mode NoX-Y Zoom NoInverse Mode (Negative / Positive) No
Centering Mode NoMirror Mode NoImage Repeat No
Others (Inverting ADF & ADU)
2-Page Copy Mode No2 in 1 Yes4 in 1 YesBooklet Mode NoDuplex Copy
1→2 Yes2→1 Yes Scanning twice by turning
original.2→2 YesBook→2 No
Image Rotation (90 or 270 °) NoElectronic Sorting YesRotation Sorting NoInsertion Job NoDepartment Counter Yes 50 DepartmentsADF
Mixed Size Original Feed Yes* LTR and LGL, effective from June 2004 Production
JOB Build and SADF Mode No
Original Counter NoJob Memory No Yes (1 jobs)Job Time Display YesConcurrent Copy NoTandem Copy Mode NoRemote Copy Mode NoScan Once Print Many Mode YesJob Completion Notice Yes For Printer Mode onlyTrial Copy Mode NoWeekly Timer No
Copy Function
Items Description RemarksUF-9000 DP-180 / 190
12JUN 2004Ver. 2.0
![Page 13: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/13.jpg)
UF-9000
DP-180/190Function Mode YesInterrupt NoElectronic Counter YesDigital Sky Shot Mode Yes
Check / Slip Mode(Double Exposure) Yes
Check : Dimensions of a Bank check
Slip : Dimensions of a Bank check with a statement
3 Control PanelDisplay LCD 20 digits x 2 lines
Status Lamp YesGREEN : Scanning /
PrintingRED : Alarm / Warning
KeyQWERTY Keyboard YesDirectory Search (4 way) YesOriginal Size YesCopy Size YesKeypad YesClear YesStop YesStart YesEnergy Saver YesSort / Finish NoFunction Mode YesOriginal Detection Release No
Interrupt NoReset YesOne-Touch key Yes
Mode Change Yes Copier / Printer / NW Scanner / Fax and Internet Fax Mode
LCD Main Indication
Message Language (Default)
English (American) For USA and Canada
Specified Language For EU and Other Destinations
Original Size / Image Indication
Yes (without Image)
Paper Size / Image Indication
Yes (without Image)
Paper Tray Selection NoSelected Paper Tray / Tray Status Yes
Original Mode Selection Yes Text / Text-Photo / PhotoCopy Density Selection Yes 5 stepsSetting Confirmation Yes
Copy Function
Items Description RemarksUF-9000 DP-180 / 190
13JUN 2004Ver. 2.0
![Page 14: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/14.jpg)
UF-9000
DP-180/190Function Classification YesZoom Magnification YesNumber of Copies YesError Code YesFinishing NoWarning Indicators Yes
No Toner YesNo Paper YesAdd Paper Indication Yes Mechanical IndicatorPaper Jam Indication YesPaper Jam Location YesService Alert Call YesUser Error YesMachine Error YesHistory of Jam Errors Yes
4 Main UnitTotal Counter
Electronic YesMechanical Yes (Optional) Mechanical Counter
Max. Weight of Documents on the Platen Glass 6.61 lb (3 kg)
ADF with Document Guide YesClip Pocket NoOperating Instructions Pocket No
Warning / Caution Label Specified Language5 Optical System
Original Size Detection NoScanning Method 600 dpi CCDDehumidifier No
6 Process System / Yield
Toner Cartridge
Yield: 5 K (5% coverage), 6 K MaxAverage yield is based on 5% coverage of the printable area with repetitive printing of 10 pages (Letter/A4 size, single side printing, default density). The yield of a Toner Cartridge varies depending on the coverage, temperature, humidity, media, etc. Therefore, the average yield cannot be guaranteed. Continuously printing 10% coverage of printable area will reduce the yield of the Toner Cartridge to about half as compared to 5% coverage printing. The maximum yield of the Toner Cartridge will not exceed 6,000 pages by way of Digital Counter.
Copy Function
Items Description RemarksUF-9000 DP-180 / 190
14JUN 2004Ver. 2.0
![Page 15: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/15.jpg)
UF-9000
DP-180/190Efficiency1 Productivity
ADF Through-put Speed Approx. 50%ADU Copy Productivity(LTR / A4)
1→2
10 copies More than 50%
Throughput when the LSU is ready; Paper is fed from the 1st Paper Tray and is ejected to the Exit Tray.
PM Cycle1 PM Cycle
Major PM 85 K (Printer), 50K (ADF) Refer to Section 2.4.Minor PM (Cleaning) 10 K (ADF)
2 Average Copy Volume 1.5 K Monthly3 Max. Copy Volume 10 K
Packing Configuration
1 Packing Dimension 24.3 x 29.3 x 26.4 in(616 x 745 x 670 mm)
2 Packing Weight 63.9 lb (29 kg)3 Accessories
Process Unit YesOperating Instructions Yes
Power Supply
1 Power Requirement
99 - 132 VAC 47 - 63 Hz Single phase 120 VAC
180 - 264 VAC 47 - 63 Hz Single phase 220 - 240 VAC
2 Power Consumption Max. 900WAmbient Conditions
1 Temperature 50 - 80 °F / 10 - 30 °C2 Relative Humidity 30 - 80%RH
3 SafetyUL60950-1 / CSA C22.2 No.60950-1 For USA and Canada
EN60950-1 For EU and Other Destinations
4 Energy Saver Energy Star Compliant
5 EMI Class B computing device peripheral in FCC Rules Part 15 For USA and Canada
6 Lead Free Solder (PbF) This Product uses Lead Free (PbF) PCBs
Refer to the inner Front Cover and the Parts Manual for details
Copy Function
Items Description RemarksUF-9000 DP-180 / 190
15JUN 2004Ver. 2.0
![Page 16: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/16.jpg)
UF-9000
DP-180/1901.2. Fax, Printer and Internet Fax Functions1.2.1. Fax Function
Fax Function
Items Description RemarksUF-9000 DP-180 / 190
Main Specifications1 Compatibility Super G3 / G3 ITU-T Std & Non-Std2 PSTN Line Port Yes 1-Line only3 Leased Line Port No4 V.24 Line Port No5 Modem Speed 33.6 - 2.4kbps T.30/V.34/V.17/V.29/V.27ter6 Coding Scheme JBIG/MMR/MR/MH
7 ECM Yes Conforms to ITU-T Rec. T.30 ECM
8 Short Protocol Yes (B, D)
9 Transmission Speed LTR : Approx. 2.7 secA4 : Approx. 2.9 sec
ITU-T Image No. 1 (A4, Std Resolution)
10Communication Resolution dpi x lpi (pels/mm x lines/mm)
Transmission Std. : 203 x 98 (8 x 3.85) Fine : 203 x 196 (8 x 7.7) S-Fine : 203 x 391 (8 x 15.4)
406 x 391 (16 x 15.4) 600dpi : 600 x 600 dpi
Reception Std. : 203 x 98 (8 x 3.85) Fine : 203 x 196 (8 x 7.7) S-Fine : 203 x 391 (8 x 15.4)
406 x 391 (16 x 15.4) 600dpi : 600 x 600 dpi
600 dpi communication is only possible between T.30 Compliant Panafax, WORKiO, and other T.30 compliant machines.
Scanner Mechanism1 Scanning Device CCD (ADF / Platen)
2 Scanning Resolution /SpeedStd: 203 x 98 (8 x 3.85)dpi x lpi (pels/mm x lines/mm)
LTR : 2.7 sec LTR : 2.7 secA4 : 2.9 sec
Excludes: Initializing Time, ADF slipping factor, and Data XMT Time.
(Letter size for USA and Canada; A4 size for Other Destinations)
Fine: 203 x 196 (8 x 7.7)dpi x lpi (pels/mm x lines/mm)S-Fine: 406 x 391 (16 x 15.4) dpi x lpi (pels/mm x lines/mm)600dpi: 600 x 600
3 Document Size (Max.) Legal216 x 2000 mm Using ADF only
4 Effective Scanning Width LTR : 8.3 in (212 mm)A4 : 8.2 in (207 mm)
(Letter size for USA and Canada; A4 size for Other Destinations)
5 ADF Capacity 50 sheets Face Up, top feedLTR / A4 (20 lb / 75 g/m2)
16JUN 2004Ver. 2.0
![Page 17: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/17.jpg)
UF-9000
DP-180/1906 Collation Stack Yes Face DownPrinter Mechanism
1 Recording Method LP
2 Recording Speed Approx. 19 ppm Recording Speed attained after the 1st copy.
3 Recording Resolution Fax 600 x 600 dpi
4 Recording Paper Size Legal / Letter Legal / LetterA4 / A5 Invoice: Not supported.
5 Effective Printing Width LTR : 8.1 in (207mm)
LTR : 8.1 in (207mm)
A4 : 7.9 in (201 mm)
Letter : USA and CanadaA4 : Other Destinations
6 Recording Paper Capacity 250 sheets Tray 1 + 2 : Max. 800 sheetsLTR / A4: 20 lb (75 g/m2)
7 Collation Stack Yes Face Down
8 Consumable All in One Cartridge
Drum Unit and Toner
Fax Memory
1 Standard Memory 2 MB Flash ROM, ITU-T Image No.1 (A4, Std Resolution)
2 Optional Memory 4 MB8 MB
Expansion Flash Memory Card, using ITU-T Image No.1 (A4, Std Resolution)
Dual Operation1 Multi Task Operation Yes2 Direct XMT Reserve Yes3 Memory XMT Reserve Yes
4 Number of Memory Job Files Yes Max. 50 files
Dialing/Telephone Features1 One-Touch Keys 322 One-Touch / Program Keys 83 One-Touch Auto Dialers 404 Abbr. Auto Dialers 160
5 Total Auto Dialers 200
Plus an additional 800 stations available to select from, when the optional Hard Disk Drive is installed.
6 Directory Search Dialing Yes7 Program Dials 88 Max. Tel Number Digits 36
9 Max. Station Name Characters 15
10 Full Number Dialing (Buffered Dialing) Yes Max. 50 stations
11 Direct Dialing(Monitor Dialing) Yes Voice mode
Fax Function
Items Description RemarksUF-9000 DP-180 / 190
17JUN 2004Ver. 2.0
![Page 18: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/18.jpg)
UF-9000
DP-180/19012 Automatic Redialing Yes Up to 15 times at 0 to 15 min. intervals
13 Manual Redialing Yes Pressing the REDIAL/PAUSE button
14 Line Monitor Speaker Yes15 Chain Dialing (Hybrid Dial) Yes In Monitor Dialing mode only16 Pulse / Tone Dialing Yes 10 pps / DTMF17 Pulse to Tone Change No18 Flash Key Yes19 Handset Option
Transmission Features1 Direct Transmission Yes2 Memory Transmission Yes Page Retransmission
3 Quick Memory Transmission Yes
4 Multi-Station Transmission (Sequential Broadcasting) Yes
Max. 250 stations(200 One-Touch / Abbr. + 50 Full Number Dialing)
5 Direct Deferred Transmission No ADF Deferred Transmission
6 Deferred Transmission Yes Max. 50 timers
7 Deferred Multi-Station Transmission Yes
8 Priority Direct Transmission Yes Priority ADF Transmission
9 Priority Memory Transmission No
10 Batch Transmission Yes Real Time (up to 5 Files)
11 90 Degree Rotation Transmission No
12 Cover Sheet Yes13 Confidential Mail Box No14 Multi-Copy Transmission No
15 Memory Back-Up Yes
FAX: Back-up with Flash Memory.
Copy / Printer: No Back-up with D-RAM
16 Duplex Scanning NoReception Features
1 Substitute Reception Yes
2 Fixed Reduction YesLTR/A4/LGL: 70 - 100% (in 1% Steps), Top & Left Alignment
3 Auto Reduction YesLTR/A4/LGL: 70 - 100% (in 1% Steps), Top & Left Alignment
4 Overlap Printing Yes Page End Approx. 0.51 in (13 mm)
5 Receive to Memory Yes
Fax Function
Items Description RemarksUF-9000 DP-180 / 190
18JUN 2004Ver. 2.0
![Page 19: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/19.jpg)
UF-9000
DP-180/1906 Distinctive Ring Detector (DRD) Yes Specified Destinations only
7 90 Degree Rotation Reception No
8 Duplex Printing YesPolling
1 Polling Yes2 Turnaround Polling No3 Multi-Station Polling Yes Max. 250 stations4 Deferred Polling Yes Max. 50 timers
5 Deferred Multi-Station Polling Yes Max. 50 timers / 250 stations
6 Direct Polling Tx No7 Memory Polling Tx Yes 1 File8 Preset Polling Password Yes
9 Temporary Polling Password Yes
10 Continuous Polling YesConvenience
1 Panel Display Yes2 Voice Contact No3 Edit File Mode Yes With View Mode4 Incomplete File Save Yes With View Mode5 Automatic Cover Sheet Yes
Certainty1 Verification Stamp Yes2 Header / Total Page Print Yes
3 Transaction Journal Yes 200 Transactions / with View Mode
4 Comm. Journal Yes With Image Data5 Last Ind. XMT Journal Yes
Printout Lists1 One-Touch List Yes2 ABBR. No. List Yes3 Program List Yes4 Address Book Search List Yes Auto Dialer List5 Fax Parameter List Yes6 File List Yes With View Mode7 Ind. XMT Journal Yes8 Directory Sheet Yes
Identifications1 Logo Yes 25 Characters2 Multiple Logo No3 Character ID Yes 16 Characters4 Numeric ID Yes 20 Digits
Fax Function
Items Description RemarksUF-9000 DP-180 / 190
19JUN 2004Ver. 2.0
![Page 20: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/20.jpg)
UF-9000
DP-180/190Special Communications1 Password XMT / RCV Yes2 Selective Reception Yes TSI Check3 Relay XMT Request No4 Relay XMT Center No5 Confidential XMT / Polling No6 Confidential Center No7 Mailbox XMT / Polling Yes8 Mailbox Center Yes Max.10 Mail Boxes9 File XMT No
10 Received Fax Forward Yes Received File Transfer 11 Sub-address XMT Yes T. Routing 12 Sub-address Auto Routing Yes13 NYSE Yes For USA and Canada only14 Internet Fax Relay XMT Yes iFAX → iFAX → G3FAX15 Email Relay XMT Yes PC → iFAX → G3FAX16 Panafax Desktop Yes
Standards
1 PSTNFCC Part 68 / Industry Canada
No. CS-03: Issue 8 For USA and Canada
TBR21 For EUOthers
1 Fax Access Code Yes2 PIN Code Access Yes For USA and Canada only3 Intelligent Redial (AI) Yes 5 Files4 Department Code Yes 50 Departmental Codes5 Power Saver Mode Yes6 Self Diagnostic Function Yes
7 Remote Diagnostic Function Yes Specific Destinations only
8 Check & Call Function Yes9 V.24 / Encryption Interface No
Fax Function
Items Description RemarksUF-9000 DP-180 / 190
20JUN 2004Ver. 2.0
![Page 21: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/21.jpg)
UF-9000
DP-180/1901.2.2. Printer Function
Printer Function
Items Description RemarksUF-9000 DP-180 / 190
Interface1 Centronics Parallel I/F No
2 LAN (Network) Yes Ethernet 10Base-T/100Base-TX
3 USB Port Yes USB1.14 IEEE-1394 No Firewire
Printer Function1 Printing Size LGL / LTR LGL / LTR /
A4 / A5 / B52 Bypass Yes3 Stapling No
4 Printing Resolution (dpi) Max. 1200 (Interpolated) x 600 dpi
Selectable 600 dpi, with Smoothing, the results are similar to PS3 / PCL6 Printers (1200 dpi Interpolated).
5 Interface USB / Ethernet
6 OS Win 98 / Win Me / Win NT 4.0 / Win 2000 / Win XP / MAC 8.6-10.1 MAC 8.6-10.1 is PS only.
7 Printer Work Memory Size 20 MB Not expandable8 GDI Yes
9 PDL (PCL6) YesRequires Optional PS / PCL6 Emulation Kit and Optional Expansion Board.
10 PDL (PS3) YesRequires Optional PS / PCL6 Emulation Kit and Optional Expansion Board.
11 Duplex Printing Yes Custom Size/Postcard Size is not available.
12 Collation Stack Yes13 Status Monitor
Network YesUSB No
14 Network Status Monitor Yes15 Smoothing Yes16 Applicable PC IBM PC, AT or Compatible, MAC MAC is PS only.17 Multi-Task Operation
Printing while Fax-XMT from Memory Yes
Printing while Fax-RCV into Memory Yes
Fax-XMT from Memory while Printing Yes
Fax-RCV into Memory while Printing Yes
21JUN 2004Ver. 2.0
![Page 22: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/22.jpg)
UF-9000
DP-180/19018 Output to separate tray for Printing, Fax, Copy No
19 Font Yes Requires Optional PCL6 or PS / PCL6 Emulation Kit
20 Mailbox Yes
Requires Optional HDD Unit.Max. 100 Users.Max. 20 mailboxes for each User ID
21 Secure Mailbox Yes
Requires Optional HDD Unit.Max. 100 Users.Max. 20 mailboxes for eachUser ID
Printer Function
Items Description RemarksUF-9000 DP-180 / 190
22JUN 2004Ver. 2.0
![Page 23: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/23.jpg)
UF-9000
DP-180/1901.2.3. Network Scanner Function
Network Scanner Function
Items Description RemarksUF-9000 / DP-180/190
Interface1 Centronics Parallel I/F No2 LAN (Network) Yes Ethernet 10Base-T/100Base-TX3 USB Port No4 IEEE-1394 No Firewire
Network Scanning Function1 Scanning Device CCD (ADF / Platen)2 Scanning Speed (ADF)
Mono LTR: 2.7 secA4 : 2.9 sec
600 dpi(Data XMT time is not included.)
Color LTR: 11 secA4 : 12 sec
300 dpi(Data XMT time is not included.)
3 Halftone 256 Halftone shades, Color 24bit, 16670 K With Error Diffusion
4 Max. Document Size Legal216 x 2000 mm Using ADF only
5 Scanning Resolution(dpi)
Mono600 x 600300 x 300150 x 150
Default: 300 dpi
Color300 x 300150 x 15075 x 75
Default: 150 dpi
6 OS Win 98 / Me / Win NT 4.0 / Win 2000 / XP
7 2-Sided Scanning No8 File Format
Mono Multi-page TIFF / PDFColor JPEG / PDF
9 Completion Notice Yes Auto Pop-up on the PC Screen 10 Protocol TCP/IP / Non-Std
Network Address Features
1 One Touch Address Keys 40 Shared with Fax/I-Fax One-Touch Address, 40 in Total
2 Abbr. Address Numbers 60 Independent for Network Scanner
23JUN 2004Ver. 2.0
![Page 24: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/24.jpg)
UF-9000
DP-180/1901.2.4. Internet Fax Function
Internet Fax Function
Items Description RemarksUF-9000 / DP-180/190
Main Specifications1 Communication Protocols SMTP / POP3 / MIME2 Max. Modem Speed NA3 Coding Scheme JBIG/MMR/MR/MH
4 File Format TIFF / JPEG or PDF
Selectable(PDF & JPEG formats are used for Scan-to-Email, current I-Fax standards do not support these file formats)
5 Line Interface RJ-45 Ethernet LANScanner Mechanism
1 Max. Document Size Legal216 x 2000 mm With the ADF only
2 Effective Scanning Width LTR : 8.3 in (212 mm)A4 : 8.2 in (207 mm)
Letter size: for USA and CanadaA4 size : for Other Destinations
3 Scanning Resolutiondpi x lpi (pel/mm x lines/mm)
Std : 203 x 98 (8 x 3.85)Fine : 203 x 196 (8 x 7.7)S-Fine : 203 x 391 (8 x 15.4)
: 406 x 391 (16 x 15.4)600dpi : 600 x 600 dpi
LAN: 600 dpi, 16 x 15.4 Scanning Resolution is available.
Printer Mechanism1 Printing Resolution 600 dpi
2 Effective Recording Width LTR : 8.1 in (207 mm)A4 : 7.9 in (201 mm)
Transmission Features
1 Multi-Task Operation Yes Convenient simultaneous G3 Fax and LAN operation.
2 Memory Transmission Yes
3 Sequential Multi-Station Transmission Yes
4 Simultaneous Multi-Station Transmission Yes
Max. 250 stations(200 One-Touch / Abbr. + 50 Full Number Dialing)
5 Sender Selection Yes
6 G3 / Email Mixed Broadcasting Yes
7 Deferred Transmission Yes8 Fax Forward Yes Received File Transfer9 Sub-address RCV Yes Inbound Routing
10 Mail Header Email Header Print Selection Yes All or From / To / Subject onlySubject Line Random Entry
24JUN 2004Ver. 2.0
![Page 25: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/25.jpg)
UF-9000
DP-180/190LAN Features1 Internet Fax Communication Yes2 Internet Mail Reception Yes3 Internet Fax Server Features
Internet Fax Relay XMT Yes iFAX → iFAX → G3FAXEmail Relay XMT Yes PC → iFAX → G3FAXReceived Fax / Email Forward Yes Local print available
PC FAX Transmission Yes Panafax Desktop Only (Network)
Inbound Routing Yes Using Sub-Address. Local print available
Phone Book Registration from PC Yes Via Email or Network Address Editor
4 I-Fax Parameters Registration via Email Yes
5 Internet Delivery Confirmation Yes With MDN 6 Network Scanning Yes 600 dpi7 Network Printing
LPR / LPD Yes 600 dpiGDI Yes 600 dpi
PDL YesRequires Optional PS / PCL6 Emulation Kit and Optional Expansion Board.
8 DHCP Client Yes9 LDAP Yes Lightweight Directory Access Protocol
10 TIFF Viewer Yes Selectable, PDMS / TIFF Viewer11 NYSE Yes For USA and Canada only
Certainty1 Comm. Journal (w / Image) Yes
ID1 Email Address Yes
Internet Fax Function
Items Description RemarksUF-9000 / DP-180/190
25JUN 2004Ver. 2.0
![Page 26: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/26.jpg)
UF-9000
DP-180/1901.3. System Combination
Scanner Unit (SPC PC Board)
Expansion FlashMemory Card
4 or 8MB
Main PC Board
Image Memory
(1-Slot)
Electronic Sorting Memory
2nd Paper Feed Module Option
Option
Standard Configuration
Panel(PNL PC Board)
MechanicalCounter Option
Handset KitOption
16, 64 or 128MB
Hard DiskDrive Option
Accounting Software Option
PCL6 Emulation Option
PS/PCL6 Emulation Option
USBInterface
GDI Printer
10/100 EthernetInterface
Super G3 Fax Communication
Automatic Document Feeder (ADF)
Automatic Duplex Unit
Internet Fax/E-Mail
NetworkScanner
Program Expansion Board
8MB
26JUN 2004Ver. 2.0
![Page 27: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/27.jpg)
UF-9000
DP-180/1901.4. Options List■ Options
■ Supplies
UF-9000
DP-180/190
Note:PCL6 is a Page Description Language of the Hewlett-Packard Company.PostScript 3 (PS3) is a Page Description Language of the Adobe Systems Company.The Part Name(s) / Part Number(s) differ depending on the Models and the Destinations.
Option Name Option Number Remarks
Printer Controller Module (PCL6*) DA-PC188 For DP-180/190DA-PC190 For UF-9000
Multi Page Description Language Controller Module (PCL6/PostScript 3*)
DA-MC188 For DP-180/190DA-MC190 For UF-9000
Hard Disk Drive Unit DA-HD19
Additional Optional Sorting Image Memory (Minimum 16 MB) is required for the Hard Disk Drive to function. (PS additional fonts, Mail Box, additional 800 addresses, etc.)
Expansion Board DA-EM600 F-ROM Board (8 MB) is required for PCL or PS printing.
Expansion Flash Memory Card, 4 MB UE-410047 Additional Memory for Fax / I-FaxExpansion Flash Memory Card, 8 MB UE-410048Image Memory (16 MB) DA-SM16B
For Electronic SortingImage Memory (64 MB) DA-SM64BImage Memory (128 MB) DA-SM28BAccounting Software DA-WA10 For Accounting Function2nd Paper Feed Module DA-DS188
Handset KitUE-403171 For USA and Canada
UE-403172 For Other DestinationsAvailable in Specified Destinations
Deluxe Stand DA1D190 For USA and Canada onlyMechanical Counter DZTQ000066 Supplied as a Service Part.
Part Name Part Number RemarksToner Cartridge UG-5530 All in One Cartridge
Part Name Part Number Remarks
Toner DQ-UG16H For DP-180DQ-UG17H For DP-190
Drum Unit DQ-UH34H For DP-180DQ-UH35H For DP-190
27JUN 2004Ver. 2.0
![Page 28: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/28.jpg)
UF-9000
DP-180/1902 Maintenance, Adjustments and Check Points2.1. Preventive Maintenance
Preventive maintenance is performed at specific intervals and consists of machine
cleaning and parts replacement.
It is essential to perform these service activities properly and at the specified intervals
for customer satisfaction.
The purpose of this service is to maintain machine performance and image quality.
- You should prepare the replacement parts, and cleaning tools beforehand.
- After completing the preventive maintenance, discard the used parts andpackaging in accordance with local regulations and clean the surrounding area.
- Before servicing the equipment, disconnect the power cord from the wall outlet.- Before using solvents such as IPA (Isopropyl alcohol), put on rubber gloves
and eye protection.
1 Timing- Perform the preventive maintenance in accordance with the Preventive
Maintenance Check List. (refer to 2.4.)
2 Cleaning the Rollers- Rollers should be cleaned with water and cloth.- Use the IPA (Isopropyl Alcohol) sparingly.
3 Disassembly and Adjustment Precautions
Turn the Power Switch on the Left Side of the machine to the OFFposition, and then unplug the AC Power Cord from the wall outlet before disassembling the machine. (During a Lightning Storm, to prevent electrocution disconnect the Telephone Line Cable first before unplugging the AC Power Cord.)
CAUTION!
- After taking the unit apart, do not attempt to operate the machine.- When operating the machine with covers removed, be careful and avoid clothing
from being caught by moving components.
-
- Ensure to use correct screws.
- Use toothed lock washers for the installation of ground wires to ensure electrical
continuity.
- To reassemble, reverse the sequence of disassembly, unless otherwise specified.
- Blown fuses should only be replaced with fuses of the same specified rating.
While the electricity is applied to the unit, do not connect nor disconnect theconnectors on any PC Board.
28JUN 2004Ver. 2.0
![Page 29: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/29.jpg)
UF-9000
DP-180/1904 Laser Handling Precautions
The optical laser system employed by this photocopier is completely sealed by
a protective housing and an external cover. Therefore, the laser beam will not
stray or leak during photocopying operation.
However, when servicing the photocopier, take the following precautions:
1. Do not insert any screwdrivers or other tools that have high reflective
properties into the laser's path..2. Before servicing the photocopier, remove watches, rings, or other metallic
objects that you may be wearing. (This is to avoid the danger of the laser
striking the eye by reflecting off the metallic objects being worn.)
Since the laser beam cannot be seen with the naked eye, for maximum
safety, please follow the above precautions.
5 Safety Interlock Switches
- The service technician may defeat the safety interlock switches by inserting a
interlock cheater into the opening of the switch cover.
- Ensure to remove the interlock cheater from the switch cover after completion
of service.
29JUN 2004Ver. 2.0
![Page 30: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/30.jpg)
UF-9000
DP-180/1902.2. Required Tools
2.2.1. Preventive Maintenance Method
No. Tools No. Tools1 Soft Cloth 7 Pliers2 Isopropyl Alcohol 8 Cotton Swab3 Phillips Screwdriver (#2) 9 Brush
4 Stubby Phillips Screwdriver (#2) 10KS-660 - Conductive Grease(Available from Shin-Etsu Silicones of America, Inc. URL: http://www.shinetsusilicones.com)
5 Slotted Screwdriver (3/32 in) 11Molykote EM-50L Grease (Available from Dow Corning, URL: http://www.dowcorning.com)
6 Tweezer
No. Part Description Important Action Comments
1 Memory Data Check 1. Print the RAM DATA for reference and as a precaution.2. After completing the task(s), print and compare the RAM
DATA with the previously printed one.2 Auto Document
Feeder (ADF)Check & Clean
1. Clean the Rollers and Separation Rubber with Wet soft cloth (Water).Note:
For stubborn toner accumulation, wipe with a soft cloth saturated with Isopropyl Alcohol first, then follow up with a soft cloth saturated with water.
3 Scanner Unit Check & Clean
1. Clean the Scanning Glass or White Reference Sheet with Isopropyl Alcohol when required.
4 Transmitter Unit Check & Clean
1. Remove any foreign obstacles.2. Clean the Rollers with Wet soft cloth (Water).
5 Mirrors Check & Clean
1. Do not touch the surface of the Mirrors with your bare hands. Clean any dirt or fingerprints with a soft cloth, saturated with Isopropyl Alcohol.
6 Inspection Items Check 1. Check the Harnesses.2. Check the Connectors.3. Check the Screws. If required, replace consumable parts.
7 Gears, Rollers Shafts Check & Grease
1. Check and grease the required Gears and Shafts.
8 Timing Belts Check & Clean
1. Check for belt looseness or abrasion.2. Adjust the Idle Pulley.
30JUN 2004Ver. 2.0
![Page 31: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/31.jpg)
UF-9000
DP-180/1902.3. Preventive Maintenance Points
31JUN 2004Ver. 2.0
![Page 32: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/32.jpg)
UF-9000
DP-180/1902.4. Preventive Maintenance Check ListThe chart outlined below is a general guideline for maintenance. The list is for an average usage of 50 transmitted and received documents per day. Needless to say, the environmental conditions and actual use will vary these factors. The chart below is for reference only.
Note:1. Wet Cloth represents a soft cloth saturated with water. For stubborn toner accumulation, wipe with a
soft cloth saturated with Isopropyl Alcohol first, then follow up with a soft cloth saturated with water.2. The Maintenance Cycle is based on the Counter Information for each individual module.
To verify the counter information, print the Total Counter List using the Service Mode: F7 - Electronic Counter - 00 (List Print).
3. Cleaning, Replacement and Adjustment Cycle (Sheet) are based on using Panasonic's recommended standard paper and supplies. These cycles may vary with the kind of paper used, Paper size, orientation, print duty, continuous/interval print and/or ambient conditions.
• Total Counter View Mode on the LCDThe Total Counter can be displayed on the Panel Display by pressing "COPY SIZE" and "PAPER TRAY" keys simultaneously in Standby mode for quick reference.
• LCD Contrast AdjustmentPress holding the “CLEAR” key and press “ORIGINAL SIZE” key for Lighter or “COPY SIZE” key for Darker.
No.Preventive
Maintenance Parts
Ref. No.
Cleaning Replacement/Adjustment Ref. CounterCycle
(Sheet) Method Cycle (Sheet) Procedure
ADF Unit1 Separation Rubber 547 10K Wet soft cloth 50K Refer to
2.2.1. of the Service Manual
F7-082 Pickup Roller 414 10K Wet soft cloth 100K3 ADF Roller 417 10K Wet soft cloth 100K4 Feed Roller 516 10K Wet soft cloth 100K
Paper Feed Module5 Pickup Roller 1316 10K Wet soft cloth 85K Refer to
2.2.9. of the Service Manual F7-12
6 Separator Pad 1615 10K Wet soft cloth 85K
7 Bias Transfer Roller (BTR) 1503 10K Dry soft cloth 85K
Refer to 2.2.10. of the Service Manual
2nd Paper Feed Module8 Pickup Roller 1733 10K Wet soft cloth 85K Refer to
2.2.12. of the Service Manual
F7-139 Separator Pad 1812 10K Wet soft cloth 85K
Fuser Unit
10 Fuser Unit 1117 - - 85K
Refer to 2.2.8. of the Service Manual
F7-02
TOTAL COUNTER
1234
32JUN 2004Ver. 2.0
![Page 33: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/33.jpg)
UF-9000
DP-180/1902.5. Updating the FirmwareThe Quickest and Most Easiest Method of Updating the Firmware is to use the Network Firmware Program Tool (FUP) using Ethernet LAN Port and a Crossover Cable.The Network FUP Tool version must be 3.XX or higher, and it can be found on the Panasonic Document Management System CD-ROM included with the main unit or on the CD-ROM included with the PCL or PS/PCL options.Refer to the Firmware Update Operation Instructions, Service Notes (Section 8.1. of the Service Manual) for additional details.
2.5.1. Firmware ConfigurationA. Hardware Configuration
This machine is controlled by two (2) CPUs which are located on the System Control (SC) PC Board and the Scanner Control (Scanner).
B. SC PC Board FirmwareThe 4 MB Program Memory (F-ROM) is integrated on the SC PCB. An Optional Expansion 8 MB Program Memory (FRM8 PCB) can be installed into SLOT 1.The Firmware to be written into the 4 MB onboard and the 8 MB of SLOT 1 depends upon the configuration of the Standard, PCL or PS Options.
(1) StandardThe Standard Program (1) is only written into the 4 MB onboard, which is assigned as ROM Code (A).
(2) For PCL OptionThe PCL Control Program (2) must be written into the 4 MB onboard, which is assigned as ROM Code (B). The PCL Control Program (3) and PCL Font data (4) are written into the 8 MB in the SLOT 1. The Firmware (3) and (4) are assigned as ROM Code (C).When using 8 MB Flash Memory Card, the 8 MB Program (C) can be written onto one card.When using 4 MB Flash Memory Card, the 8 MB program (C) must be divided onto 2 cards, one 4 MB card for the PCL Control Program (3) and one 4 MB card for the PCL Font data (4).
(3) For PS OptionThe PS Control Program must be written into the 4 MB onboard, which is assigned as ROM Code (D). The PS Control Program (6) and (7) are written into the 8 MB in the SLOT 1. Both Firmwares (6) and (7) are assigned as ROM Code (E). When using 4 MB Flash Memory Card, the 8 MB program (E) must be divided onto 2 cards, one 4
SC PC Board StandardConfiguration
With PCL OptionConfiguration
With PS OptionConfiguration
On Board (A)
4 MB
(B)
4 MB
(D)
4 MB
PC (1) (2) (5)
CPU 4 MBProgram Program Program
Ethernet Port
F-ROM
PC
USB Port Slot 1 (CN327) (C) 8MB (E) 8MB(3) (6)
Program Program
8 MB
2 MB (a) 4 MB (a)FRM8 PCB
(4) (7)Flash Memory Card
Font
4 MB or 8 MB4 MB (b)
4 MB(b)
Panel Control Program (Display & Key In)Bitmap DataFont Data
SPC PC Board
CPU 2 MB
Scanner Control ProgramF-ROM
Font
33JUN 2004Ver. 2.0
![Page 34: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/34.jpg)
UF-9000
DP-180/190MB card for the PS Control Program (6) and one 4 MB card for the PS Control Program (7).
C. SPC PC Board FirmwareThe 2 MB Program Memory (F-ROM) is integrated on the SPC PCB. The Programs for Scanner Control and Printer Control are saved on the Board. The Firmware is transferred as Serial Data from the SC PCB.
D. Firmware Updating PortsThree (3) types of Ports are available for updating the firmware.
(1) Ethernet LAN Port (The Quickest and Most Easiest Method)The machine's Firmware can be updated from a PC via Local Area Network (LAN). Refer to the Firmware Update Operation Instructions, Service Notes (Section 8.1. of the Service Manual) for additional details.
(2) USB Port (Alternate)The machine's Firmware can be updated from a PC via USB Port. The Master Firmware Card can also be created from a PC using the USB Port. Refer to the Firmware Update Operation Instructions, Service Notes (Section 8.1. of the Service Manual) for additional details.
(3) Flash Memory Card (Alternate)The machine's Firmware can be updated using the Master Firmware Card. The Master Firmware Card can be created by copying the Firmware from an existing machine's SC PCB using a 4 MB or 8 MB Flash Memory Card. To update the SC, SPC and PNL PCB, 3 Flash Memory Cards are required for the Standard configuration or 5 Flash Memory Cards for the PCL or PS/PCL configuration.
34JUN 2004Ver. 2.0
![Page 35: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/35.jpg)
UF-9000
DP-180/1902.5.2. Updating through a LAN Port (The Quickest and Most Easiest Method)The firmware code can be easily updated when the main unit is connected to a LAN. The Network Firmware Update Tool can also be used by connecting to the machine using a crossover cable, if the unit is not connected to a LAN.
1) Install the Network Firmware Update Tool to your PCThe option CD-ROM includes the Network Firmware Update Tool and the Main Unit Firmware Code. Please refer to the following Operating Instructions to install the Network Firmware Update Tool. The installation password is "workio".Operating Instructions:\xFirmware\Tools\NwFirmup\NwFirmup OI.pdf (Refer to the NW Firmware Update Tool OI on the CD)Setup:\xFirmware\Tools\NwFirmup\Setup\Setup.exe
2) Preparing the Firmware CodeDouble click the appropriate Destination Shortcut Batch File and copy the Firmware Code File on the CD-ROM to the Firmware Data Folder in your PC. Note that the files in the Archive will be extracted automatically into the designated folder when the Archived file (.exe) is Double-clicked.Example:From:Destination Shortcut Batch File: D:(CD-ROM Drive) \ xFirmware \ USA.batFirmware Code File: UF-9000_AU_xxxxxxxx.exe or DP-190_180_xx_xxxxxxxx.exeTo:Firmware Data Folder: C:\ Panasonic \ Panasonic-FUP \ Data
3) Preparing the Main Unit for the Firmware UpgradeMake sure the unit's Key Operator Password is the same as the tool's password.Make sure the unit is in an idle state (e.g. not making copies, not printing, etc.).
4) Upgrading the Main Unit's Firmware CodeStart the Network Firmware Update Tool and select the following Firmware Code Folders in the C:\Program Files\Panasonic\Panasonic-FUP\Data folder, and then follow the display instructions to upgrade the Main Unit's Firmware Codes.
Parent Firmware File Folder Sub Firmware File Folder Transferring Order\ UF-9000_AU_xxxxxxxx \ SC_STD \ DX-TriAxVxxxxx_xx 1
\ SC_PCL \ DX-TriBxVxxxxx_xx 1\ SC_PS \ DX-TriDxVxxxxx_xx 1\ SPC \ DX-TRI-SAAVxxxxx 2
\ DP-190_180_xx_xxxxxxxx \ SC_STD \ DP-TriAxVxxxxx_xx 1\ SC_PCL \ DP-TriBxVxxxxx_xx 1\ SC_PS \ DP-TriDxVxxxxx_xx 1\ SPC \ DX-Tri-SAAVxxxxx 2
When you select the Parent Folder, the following Firmware Type window appears. Proper Sub File Folders are selected automatically by selecting the Firmware Type.The transferring order is set up automatically.
35JUN 2004Ver. 2.0
![Page 36: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/36.jpg)
UF-9000
DP-180/190Note:1. Manual mode must be used, when updating the designated version of the firmware or changing
the type of the firmware. Please refer to the Section 2.2, "Setting up the Network Firmware Update Tool, File Selection Tab" of the Operating Instructions.
2. While updating the firmware code, the display may become garbled, however, it will return to normal upon completion of the firmware update.
3. If the firmware update fails and the unit does not boot up, the Network Firmware Update Tool will not be able to transfer the firmware code. If this occurs, please refer to the next section "Updating through the USB Port" and use the Local Firmware Update Tool to recover the unit.
4. The suffix "_xx" for the Folder Name or File Name may not exist depending on the destination location.
2.5.3. Updating through USB Port (Alternate Method)If the device is not connected to the LAN, upgrade the firmware code using the USB Port.
1) Install the Local Firmware Update Tool to your PCThe option CD-ROM includes the Local Firmware Update Tool and the Main Unit Firmware Code. Please refer to the following Operating Instructions to install the Local Firmware Update Tool.Operating Instructions:\xFirmware\Tools\Firmup\FIRMUP OI.pdf (Refer to the Local Firmware Update Tool OI on the CD)Setup:\xFirmware\Tools\Firmup\Setup\Setup.exe
2) Preparing the Firmware CodeDouble click the appropriate Destination Shortcut Batch File and copy the Firmware Code File on the CD-ROM to the Firmware Data Folder in your PC. Note that the files in the Archive will be extracted automatically into the designated folder when the Archived file (.exe) is Double-clicked.Example:From:Destination Shortcut Batch File: D:(CD-ROM Drive) \ xFirmware \ USA.batFirmware Code File: UF-9000_AU_xxxxxxxx.exe or DP-190_180_xx_xxxxxxxx.exeTo:Firmware Data Folder: C:\ Panasonic \ Panasonic-FUP \ Data
3) Preparing the Main Unit for the Firmware UpgradeImportant: DO NOT connect the USB Cable yet.Enter into Test Mode F9-07-01 to enable the unit to accept the programming code from the USB Port.
Now connect the USB Cable between the Unit and PC.Repeat the above steps if there are additional firmware code files to be updated.
36JUN 2004Ver. 2.0
![Page 37: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/37.jpg)
UF-9000
DP-180/1904) Upgrading the Main Unit's Firmware CodeStart the Local Firmware Update Tool and select the following Firmware Code Parent File Folder in the C:\Panasonic\Panasonic-FUP\Data folder, and select the Firmware Code Type then follow the display instructions to upgrade the Main Unit's Firmware Codes. You must process each firmware file separately in this manner and sequence.
Note:1. While updating the firmware code, the display may become garbled, however, it will return to
normal upon completion of the firmware update.2. Please refer to the service manual for additional details.3. The suffix "_xx" for the Folder Name or File Name may not exist depending on the destination
location.
2.5.4. Updating the Firmware using the Master Firmware Card (Alternate Method)1. Before starting, print the F5/F6 Parameters List (Copy Service Mode F9-03-00).2. Turn the Power Switch on the left side of the machine to the OFF position. (During a Lightning
Storm, to prevent electrocution disconnect the Telephone Line Cable first before unplugging the AC Power Cord.)
3. Install the appropriate Master Firmware Card into the machine.4. Turn the Power Switch on the Left Side of the machine to the ON position.5. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.6. Perform the Copy Service Mode F9-07-00 (Update From Master Card).7. The firmware is copied into the machine.8. After the update is completed, the machine reboots itself and returns to standby.9. Turn the Power Switch on the left side of the machine to the OFF position.
10. Remove the Master Firmware Card from the machine.11. Turn the Power Switch on the Left Side of the machine to the ON position.
Parent Firmware File Folder Sub Firmware File Folder Firmware File Transferring Order
\ UF-9000_AU_xxxxxxxx \ SC_STD \ DX-TriAxVxxxxx_xx DX-TriAxVxxxxx_xx.bin 1\ SC_PCL \ DX-TriBxVxxxxx_xx DX-TriBxVxxxxx_xx.bin
DX-TriCxVxxxxxa_xx.binDX-TriCxVxxxxxb.bin
1-11-21-3
\ SC_PS \ DX-TriDxVxxxxx_xx DX-TriDxVxxxxx_xx.binDX-TriExVxxxxxa_xx.binDX-TriExVxxxxxb.bin
1-11-21-3
\ SPC \ DX-TRI-SAAVxxxxx DX-TRI-SAAVxxxxx.bin 2\ DP-190_180_xx_xxxxxxxx \ SC_STD \ DP-TriAxVxxxxx_xx DP-TriAxVxxxxx_xx.bin 1
\ SC_PCL \ DP-TriBxVxxxxx_xx DP-TriBxVxxxxx_xx.binDP-TriCxVxxxxxa_xx.binDP-TriCxVxxxxxb.bin
1-11-21-3
\ SC_PS \ DP-TriDxVxxxxx_xx DP-TriDxVxxxxx_xx.binDP-TriExVxxxxxa_xx.binDP-TriExVxxxxxb.bin
1-11-21-3
\ SPC \ DX-Tri-SAAVxxxxx DX-TRI-SAAVxxxxx.bin 2
When you select the Parent Folder, the following Firmware Type window appears. Proper Firmware Files are selected automatically by selecting the Firmware Type.The transferring order is set up automatically.
37JUN 2004Ver. 2.0
![Page 38: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/38.jpg)
UF-9000
DP-180/19012. Reprogram the F5 & F6 Parameters according to the lists printed in Step 1 above if the settings are other than factory default.
Note:After the update is completed, the machine reboots itself and returns to standby mode.Repeat the above steps if there are additional firmware code files to be updated.Confirm that the update was successfully completed by checking the Firmware Version with F9 Parameters F9-02-xx.
Caution:If the unit does not boot up properly in step 8, refer to 2.5.8. (Firmware Emergency Recovery)
2.5.5. Creating a Master Firmware CardA. Utilizing the Firmware Update Kit
1) Install the Local Firmware Update Tool to your PCThe option CD-ROM includes the Local Firmware Update Tool and the Main Unit Firmware Code. Please refer to the following Operating Instructions to install the Local Firmware Update Tool.
Operating Instructions:\xFirmware\Tools\Firmup\FIRMUP OI.pdf (Refer to the Local Firmware Update Tool OI on the CD)Setup:\xFirmware\Tools\Firmup\Setup\Setup.exe
2) Preparing the Firmware CodeDouble click the appropriate Destination Shortcut Batch File and copy the Firmware Code File on the CD-ROM to the Firmware Data Folder in your PC. Note that the files in the Archive will be extracted automatically into the designated folder when the Archived file (.exe) is Double-clicked.Example:From:Destination Shortcut Batch File: D:(CD-ROM Drive) \ xFirmware \ USA.batFirmware Code File: UF-9000_AU_xxxxxxxx.exe or DP-190_180_xx_xxxxxxxx.exe
To:Firmware Data Folder: C:\ Panasonic \ Panasonic-FUP \ Data
3) Preparing the Main Unit for the Programming Master Firmware CardImportant: DO NOT connect the USB Cable yet.1. Turn the Power Switch on the left side of the machine to the OFF position. (During a Lightning
Storm, to prevent electrocution disconnect the Telephone Line Cable first before unplugging the AC Power Cord.)
2. Insert/Remove the Flash Memory Card (4 MB or 8 MB) into/from the machine.3. Turn the Power Switch on the Left Side of the machine to the ON position.4. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.5. Perform the Update Program Card Mode F9-09 (Update Program Card).
The unit is now ready to accept the firmware code from the USB Port.Now connect the USB Cable between the Unit and PC. (Refer to the Local Firmware Update Tool OI on the CD)
Repeat the above steps if there are additional master firmware cards to be programmed.
38JUN 2004Ver. 2.0
![Page 39: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/39.jpg)
UF-9000
DP-180/190B. Copying the Firmware from an Existing Machine using a Flash Memory Card (4 MB or 8 MB)1. Turn the Power Switch on the left side of the machine to the OFF position. (During a Lightning
Storm, to prevent electrocution disconnect the Telephone Line Cable first before unplugging the AC Power Cord.)
2. Install a Flash Memory Card (4 MB or 8 MB) into the machine.3. Turn the Power Switch on the Left Side of the machine to the ON position.4. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.5. Perform the Copy Service Mode F9-08 (Program Backup).6. The firmware is copied into the Flash Memory Card.7. After the backup is completed, press "STOP" first and then press "FUNCTION" + "CLEAR" keys
simultaneously to return to standby.8. Turn the Power Switch on the left side of the machine to the OFF position.9. Remove the Master Firmware Card that you just created from the machine.
10. Turn the Power Switch on the Left Side of the machine to the ON position.11. Use this Master Firmware Card to update the firmware on other machines.
2.5.6. Erasing the Master Firmware Card1. Turn the Power Switch on the left side of the machine to the OFF position. (During a Lightning
Storm, to prevent electrocution disconnect the Telephone Line Cable first before unplugging the AC Power Cord.)
2. Install the Master Firmware Card into the machine.3. Turn the Power Switch on the Left Side of the machine to the ON position.4. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.5. Perform the Service Mode F9-09 (Update Program Card).6. After the Flash Memory Card is erased, machine prompts “READY TO PROGRAM PRESS SET TO
START”. Press “STOP”.7. Press "STOP" first and then press "FUNCTION" + "CLEAR" keys simultaneously to return to
standby.8. Turn the Power Switch on the left side of the machine to the OFF position.9. Remove the blank Flash Memory Card from the machine.
10. Repeat from Step 2 above if you are erasing another Master Firmware Card.
2.5.7. Notice after installing the HDD optionAfter the Hard Disk Drive Unit is installed, to prevent a Scan Disk Function from being performed (similar to Windows OS when the power is abruptly interrupted), it is important to follow the step sequence below when turning OFF the Power Switch on the machine.
1. If the machine is in the "ENERGY SAVER (Shutdown Mode)", you may turn the Power Switch on the Left Side of the machine to the OFF position. If it is not in the "ENERGY SAVER (Shutdown Mode)", continue to step 2 below.
2. Press "FUNCTION" and "ENERGY SAVER" keys simultaneously first.3. Wait approximately 10 seconds while the machine writes the closing status onto the Hard Disk Drive
Unit and advances into “ENERGY SAVER MODE”.4. Turn the Power Switch on the Left Side of the machine to the OFF position.5. Unplug the AC Power Cord. (During a Lightning Storm, to prevent electrocution disconnect the
Telephone Line Cable first before unplugging the AC Power Cord.)6. After finishing the installation of the Hard Disk Drive, please go over the above Power Down
procedure with the customer to avoid the Scan Disk Function from being performed (indicated by SCANNING HARD DISK message on the display), and customer inquiries related to abrupt Power Off.
7. Reconnect the Telephone Line Cable if it was disconnected.
39JUN 2004Ver. 2.0
![Page 40: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/40.jpg)
UF-9000
DP-180/1902.5.8. Firmware Emergency RecoveryThe easiest method to recover the firmware in an Emergency Recovery routine is to use the Master Firmware Flash Card method (1 Flash Card required).
Whichever method you select, it is easier to restore the machine's firmware to the Standard (AAV) Type first as it only requires 1 file (SC) to bring the machine to initial working condition. Note:
It is not possible to recover the SPC using this method.
After recovering, if optional PCL or PS/PCL firmware is required, use the Network Firmware Update Tool or the Local Firmware Update Tool to update the firmware to the required level.
If the unit does not boot up properly, follow the steps below:1. Turn the power Off.
Before proceeding to the next step, you must create the Master Firmware Flash Cards (read the appropriate sections first 3.5.5).
2. Turn the power On while holding the [ENERGY SAVER] button.3. When the green lamp on the front panel turns On, release the [ENERGY SAVER] button.
The unit is now ready to accept the firmware code from Master Firmware Card.Repeat the above steps if there are additional firmware code files to be updated.
2.5.9. Firmware Version
SC :DP-TRI A A Vxxxxx AU
Destination Code (Copier) PU : USA/Canada PB : UK
Destination Code (Fax) AU : USA/Canada AB : UK
Firmware Version (V1xxxx)Language Code A : A-English, C-French & Spanish B : A-English, Spanish & Portuguese
Firmware Type A : Standard B, C, D, E : Optional
Model Number
etc.
(a)DX-TRI A A Vxxxxx (a) AU
b : English, French & Spanishg : German, French & Italian
Division Soft (When it is divided into (a) and (b))
40JUN 2004Ver. 2.0
![Page 41: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/41.jpg)
UF-9000
DP-180/190SPC : DX-TRI S A A Vxxxxx
Firmware Version (V1xxxx)
AA: Fixed
SPC
Model Number
41JUN 2004Ver. 2.0
![Page 42: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/42.jpg)
UF-9000
DP-180/1902.6. Adjusting the Printer Registration, LSU Image Side to SideWhen installing the Paper Tray option, the following LSU Image Side to Side adjustment may be required.The Printer registration is adjusted at the factory. If copy image is abnormal, especially in the Rotation Copy mode, adjust it by the following procedure.
2.6.1. Printer Registration 1. Insert Letter or A4 size paper into the 1st tray and change the tray setting to the appropriate paper
size. Empty all the remaining trays (including the bypass tray) to disable them.2. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.3. Perform the Service Mode F1-03 (Print Test Pattern 1).4. Check the gap of the print pattern from the paper edge, refer to the Figure below.5. Perform the Service Mode F6-04 (Printer Registration) to adjust the gap to be 5 mm.6. If the gap is less than 5 mm, input a (-) value. If more than 5 mm, input a (+) value.8. Press "STOP" first and then press "FUNCTION" + "CLEAR" keys simultaneously to return to
standby.
2.6.2. LSU Image Side to Side Adjustment for the Tray1. Insert Letter or A4 size paper into the 1st tray and change the tray setting to the appropriate paper
size. Empty all the remaining trays (including the bypass tray) to disable them.Note:
Do not pull out the 1st tray to disable it when adjusting the 2nd tray. The 1st tray is required as it acts as a paper path for the paper in the 2nd tray.
2. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.3. Perform the Service Mode F1-03 (Print Test Pattern 1).4. Check the gap of the print pattern from the paper edge, refer to the Figure above.5. Perform the Service Mode F6-10 to F6-12, to adjust the gap to be 5 mm.6. If the gap is less than 5 mm, input a (+) value. If more than 5 mm, input a (-) value.7. Proceed the above steps for other Tray.8. Press "STOP" first and then press "FUNCTION" + "CLEAR" keys simultaneously to return to
standby.
<Figure>Two lines are printed on the top (Lead edge).For Letter or A4, place as Portrait.
5 mmTop (Lead edge)
Two lines are printed
5 mm 5 mm
Two lines are printed
42JUN 2004Ver. 2.0
![Page 43: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/43.jpg)
UF-9000
DP-180/1902.6.3. LSU Image Side to Side Adjustment for the ADU1. Insert Letter or A4 size paper into the 1st tray and change the tray setting to the appropriate paper
size. Empty all the remaining trays (including the bypass tray) to disable them.2. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.3. Perform the Service Mode F1-06 (Print Test Pattern 4).4. Check the gap of the print pattern from the paper edge, refer to the Figure above.5. Perform the Service Mode F6-16 (ADU Side Adjust), to adjust the gap to be 5 mm.6. If the gap is less than 5 mm, input a (+) value. If more than 5 mm, input a (-) value.7. Press "STOP" first and then press "FUNCTION" + "CLEAR" keys simultaneously to return to
standby.
2.6.4. Original Registration & CCD Read Adjustments1. Place the Original Document on the Platen Scanner.2. Insert Letter or A4 size paper into the 1st tray and change the tray setting to the appropriate paper
size. Empty all the remaining trays (including the bypass tray) to disable them.3. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.4. Perform the Service Mode F2 (Single Copy Test).5. Check the Image size of the Copy and the Original as Portrait.6. Perform the Service Mode F6-03 (Original Registration), to adjust the Original Registration.7. If the gap is smaller than the Original, input a (-) value. If bigger than the Original, input a (+) value.8. Perform the Service Mode F6-53 (CCD Read Position), to adjust the CCD Read for the side
position.9. If the gap is smaller than the Original, input a (+) value. If bigger than the Original, input a (-) value.
10. Press "STOP" first and then press "FUNCTION" + "CLEAR" keys simultaneously to return to standby.
2.6.5. ADF Original Read Edge & ADF Main Scan Adjustments1. Place the Original Document on the ADF.2. Insert Letter or A4 size paper into the 1st tray and change the tray setting to the appropriate paper
size. Empty all the remaining trays (including the bypass tray) to disable them.3. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.4. Perform the Service Mode F2 (Single Copy Test).5. Check the Image size of the Copy and the Original as Portrait.6. Perform the Service Mode F6-91 (Original Read Edge ADF), to adjust the ADF Original Read Edge.7. If the gap is less than the Original, input a (+) value. If bigger than the Original, input a (-) value.8. Perform the Service Mode F6-90 (ADF Image Read Start), to adjust the ADF Main Scan for Side
position.9. If the gap is less than the Original, input a (+) value. If bigger than the Original, input a (-) value.
10. Press "STOP" first and then press "FUNCTION" + "CLEAR" keys simultaneously to return to standby.
43JUN 2004Ver. 2.0
![Page 44: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/44.jpg)
UF-9000
DP-180/1903 Troubleshooting3.1. Error Codes (For Copier)The self-diagnostic functions detect troubles in the important components of the copier. When trouble occurs, the copier stops.
Note:Some Codes are not used in the UF-9000/DP-180/190, and are reserved for future use.
3.1.1. User Error Codes (U Code)
Note:Uxx and a message will appear on the Panel Display.
User Error Codes (U Code) TableCode Item Check PointsU01 CLOSE FRONT COVER 1. Front Cover is open.
2. Front Cover Sensor is disconnected.3. Front Cover Sensor is defective.4. LVPS connector is disconnected.5. LVPS is defective.6. Engine PCB is defective.
U13 TONER IS RUNNING LOWor OUT OF TONER
1. Toner Cartridge is incorrectly installed.2. Low Toner.3. Toner Sensor is disconnected.4. Toner Sensor is defective.5. Engine PCB connector is disconnected. 6. Engine PCB is defective.
U16 NO CARTRIDGE 1. No Toner Cartridge.U20 CLOSE ADF COVER 1. ADF Cover is open.
2. ADF is not installed correctly.3. ADF Cover Sensor is disconnected. 4. ADF Cover Sensor is defective.5. LVPS connector is disconnected.6. LVPS is defective.
U21 CLOSE PLATEN COVER While the copier is initializing, the ADF Cover was opened.
U52 SCANNER SELF-CHECK 1. SC/SPC PCB connector is disconnected.2. SC/SPC PCB is defective.
U90 REPLACE BATTERY Backup Battery is wearing out.
U21
U20
U90
U13 / U16
U01U52
44JUN 2004Ver. 2.0
![Page 45: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/45.jpg)
UF-9000
DP-180/1903.1.1.1. Low Toner Messages / OperationThe Toner Cartridge Yield is approximately 5,000 pages using Letter or A4 size paper and 5% Black coverage, however, the maximum yield will not exceed 6,000 pages.The machine controls the printer to maintain good print quality by controlling the Bias Voltage with the Low Toner Sensor and the Print Counter.
There are three Toner warning LCD Displays:LCD 1: [TONER IS RUNNING LOW: U13]
Low Toner sensor detects Low Toner or the machine has printed 5,500 pages.Preparing a new cartridge for replacement is recommended.
LCD 2: [WARNING TONER LOW LESS THAN 50 PAGES]450 pages have been printed since the LCD 1 appeared.Replacement with the new cartridge is recommended.
LCD 3: [OUT OF TONER: U13]50 pages have been printed after LCD 2 appeared or 6,000 pages have been printed.Replace with the new cartridge.
When replacing with a New Cartridge, perform the steps below to reset the Print Counter.1. Press "FUNCTION" key.2. Press "1" or the "Arrow" key to enter "GENERAL SETTINGS".3. Press "SET" key.4. Press "4" to enter "04 TONER REPLACEMENT PRESS SET TO SELECT".5. Press "SET" key, then "TONER REPLACEMENT? 1:Yes 2:No".6. Press "1" key to reset the Print Counter.7. Press "STOP" key to return to the Standby mode.
45JUN 2004Ver. 2.0
![Page 46: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/46.jpg)
UF-9000
DP-180/1903.1.2. Jam Error Codes (J Code)
Section Jam LocationA ADFB Paper Transport / Exit AreaC Paper Entry Area
Jam Error Codes (J Codes) TableCode Contents SectionJ00 The Registration Sensor did not detect paper within a predetermined time after paper
started feeding. (Sheet Bypass)C
J01 The Registration Sensor did not detect paper within a predetermined time after the Paper Feed Roller started rotating. (1st Feeder Unit)
C
J02 The Registration Sensor does not detect paper within a predetermined time after the Paper Feed Roller started rotating. (2nd Feeder Unit)
C
J43 The Exit Sensor does not detect paper within a predetermined time after the Fuser Unit Paper Exit Sensor is activated.
B, C
J44 The Exit Sensor keeps detecting paper after a predetermined time. B, CJ70 Read Point Sensor does not go ON within 10 seconds after the original starts feeding.
(Information Code 030 is printed on the Transaction Journal instead.)A
J71 Original was longer than 78.7 in (2m).(Information Code 031 or 032 is printed on the Transaction Journal instead.)
A
J79 The ADF Read Point Sensor keeps detecting paper in the ADF. AJ80 The Automatic Duplex Unit (ADU) Entrance Sensor does not detect paper within a
predetermined time. C
J82 The ADU Exit Sensor does not detect paper within a predetermined time after ADU Middle Sensor is activated.
C
J83 The ADU Entrance Sensor keeps detecting paper after a predetermined time has lapsed.
C
J90 The PRINT signal is not received within 1 minute after the FEED signal is received. -J91 The Paper Tray was pulled out when feeding a paper. CJ92 The Front Cover was opened when feeding a paper. CJ93 The paper remained in the ADF. A
A
B
C
46JUN 2004Ver. 2.0
![Page 47: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/47.jpg)
UF-9000
DP-180/190• Sensor and Switch Location
47JUN 2004Ver. 2.0
![Page 48: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/48.jpg)
UF-9000
DP-180/1903.1.2.1. Copy / Print Over Flow / FlowService Mode F5-10: Exit Tray Limitation (Paper Stack Limitation)
0: None1: 150 Sheets/Accumulate2: 150 Sheets/Job
Copy or Print
Yes
No
Select 1 or 2
FAX/EMAIL
Is the job larger than 150 pages?
Normal Function
If next Job is performed at this point in time
Stop printing when 150 pages print out
Warning Display Cancel Job?
Job ClearPrint the Remaining Job Pages
Copy or Print
Is Sort Memory Space Available?
Wait for Previous Job to Complete
After Pending Job is Completed, Printing Will Start
Start Print Count from 0
Add the Previous Page of a Job as Accumulative Print Count
Cancel "Pi Pi Pi" Sound
*1 : Same Function as when the next print job is received in Queue during Paper Jam
*1
1
Time Out -> Error Display on Print Queue Screen
START
STOP
Copy
Yes
No
F5-10: [2]
F5-10: [1]
Yes
No
EXIT TRAY FULL:EMPTY & PRESS START
COPY, PRINT mode
FAX/EMAIL, SCAN modeEXIT TRAY FULL:PRESS COPY
1
48JUN 2004Ver. 2.0
![Page 49: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/49.jpg)
UF-9000
DP-180/1903.1.3. Mechanical Error Codes (E Code)
E1: Optical Unit ErrorCode Function Check Points
E1- 01 Abnormal Platen Glass Scanning
1. Home Position Sensor connector is disconnected.2. Home Position Sensor is defective.3. Scanner Motor connector is disconnected.4. Scanner Motor is defective.5. Scanning Mechanism is defective.6. SPC PCB connector is disconnected.7. SPC PCB is defective.8. LVPS is defective.
E1- 22 Polygon Motor Synchronization 1. Engine PCB connector is disconnected. 2. Engine PCB is defective.3. Laser Unit is defective.4. LVPS connectors is disconnected. 5. LVPS is defective.6. SC PCB is defective.
E1- 31 Scanning Lamp (does not turn On)
1. Scanning Lamp connector is disconnected.2. Scanning Lamp is defective. 3. SPC PCB connector is disconnected.4. SPC PCB is defective.5. SC PCB is defective.
E2: Lift DC Motor ErrorCode Function Check Points
E2 Not Applicable -
E3: Development System ErrorCode Function Check Points
E3- 20 Main Motor Rotation 1. Drive Mechanism is defective.2. Main Motor connector is disconnected.3. Main Motor is defective.4. Engine PCB connector is disconnected. 5. Engine PCB is defective.6. LVPS is defective.
E4: Fuser Unit ErrorCode Function Check PointsE4- 01 Fuser Warm-up Temperature 1. Fuser Thermistor is dirty.
2. Thermistor position is incorrect. 3. Fuser temperature is low.4. Thermistor is defective. 5. Fuser Lamp connector is disconnected. 6. Fuser Thermostat is defective.7. Fuser Lamp is defective. 8. Engine PCB connector is disconnected. 9. Engine PCB is defective.
49JUN 2004Ver. 2.0
![Page 50: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/50.jpg)
UF-9000
DP-180/190Note:These error codes will appear only when the optional accessories are installed.
E4- 10 Exhaust Fan Motor Rotation (Fuser Unit Side)
1. Exhaust Fan connector is disconnected.2. Exhaust Fan is defective. 3. LVPS connector is disconnected.4. LVPS is defective.5. Engine PCB is defective.
E5: System ErrorCode Function Check PointsE5- 05 SPC Firmware Failure 1. SPC PCB is defective.E5- 11 Thermistor, Toner Sensor 1. SC/Engine PCB connector is disconnected.
2. SC/Engine PCB is defective.E5- 12 Main CPU/SPC Interface Error 1. SC/SPC PCB connector is disconnected.
2. SC/SPC PCB is defective.
E7: Optional Unit ErrorCode Function Check PointsE7- 90 Hardware Key Error Incorrect Hardware Key is installed.
E13: Low Toner or Out of TonerCode Function Check PointsE13 TONER IS RUNNING LOW
or OUT OF TONER
1. Toner Cartridge is incorrectly installed.2. Out of Toner.3. Low Toner Sensor is disconnected.4. Low Toner Sensor is defective.5. Engine PCB connector is disconnected. 6. Engine PCB is defective.
E4: Fuser Unit ErrorCode Function Check Points
50JUN 2004Ver. 2.0
![Page 51: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/51.jpg)
UF-9000
DP-180/1903.2. Information Code Table (For Facsimile)
Fax Information CodesCode Mode Phase Description of Problem Cause001 RCV
COPYC, D Leading edge of the recording
paper fails to reach the Timing Sensor. (1st Tray)
Recording paper jam.Timing Sensor abnormal.
002 RCVCOPY
C, D Leading edge of the recording paper fails to reach the Timing Sensor. (2nd Tray)
Recording paper jam.Timing Sensor abnormal.
007 RCVCOPY
C, D 1. Leading edge of the recording paper fails to reach the Paper Exit Sensor.
2. Recording paper has not completely passed the Paper Exit Sensor.
Recording paper jam.Paper Exit Sensor abnormal.
008 Paper Tray is opened while paper is feeding.
Paper Tray is opened.
010 RCVCOPY
B, C No recording paper. No recording paper or paper is not setproperly.No Paper Sensor is defective.
011 STANDBY B, C Paper Tray is not installed properly.
Connector is not installed properly.
012 RCV C, D The length of the received document is over 2 m.
Transmitter Document Jam.
017 Incorrect paper size loaded in the Paper Tray.
Paper size is incorrect.
030 XMT B Read Point Sensor does not go ON within 10 seconds after the document starts feeding.
Document is not set properly.Defective Read Point Sensor.
031 XMTCOPY
C Transmitting document was longerthan 2 meter (or 78.7 in).
The document may jam.Defective Read Point Sensor.
041 STANDBYRCV
COPY
B, C, D Out of Toner. No toner.Defective Low Toner Sensor.
043 STANDBYRCV
COPY
B, C, D Low Toner. Toner is getting low.Defective Low Toner Sensor.
045 STANDBY - No Toner Cartridge. Toner Cartridge has not been installed.Defective Toner Cartridge Sensor.
060 - A Printer Cover is open. Cover is not firmly closed.Connectors are not firmly connected.
061 - A ADF Door is open. Door is not firmly closed.Connectors are not firmly connected.
400 XMT B T1 timer (35 ± 5 sec.) elapsed without detecting 300 bps signal.
Incorrect number was dialed and the START button was pushed.Telephone line was disconnected while dialing.SC PCB (Modem) or MJR PCB are defective.Receiver is defective. (It may only be transmitting CED)
51JUN 2004Ver. 2.0
![Page 52: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/52.jpg)
UF-9000
DP-180/190401 XMT B DCN was returned from receiver while transmitter is waiting for CFR or FTT.
Your machine's ID Number is not programmed.Possible incompatibility or incorrect Password.
402 XMT B DCN was returned from receiver while transmitter is waiting for NSF/DIS.
Receiver working in non-CCITT mode only. (Possible incompatibility)
403 RCV(Polling)
B Transmitter had no polling function.
"POLLED=ON" (polling XMT ready) is not set at the transmitter. Document to be transmitted is not placed at the transmitter.
404 XMT B Transmitter sent NSS (or DCS) followed by TCF three times, but the receiver did not respond. (CFR or FTT is usually returned)
Receiver is defective. (Modem)SC PCB or FXB PCB are defective.Receiver disconnects line during first NSS (or DCS) is transmitted.
405 XMT B Transmitter received FTT after it transmitted TCF at 2400bps.Received RTN after communicating at 2400 bps.
Line quality is poor. (TCF is damaged due to line noise)Receiver is defective. (Modem, etc.) SC PCB or FXB PCB are defective.
406 RCV(Password
Comm.)
B XMT-Password mismatched.RCV-Password mismatched.Selective RCV incomplete.
XMT, RCV password does not match.Last 4 digits of TSI does not match withthe last 4 digits of ONE-TOUCH, ABBRtelephone number.
407 XMT D Transmitter received no response after it transmitted post message, such as EOP, MPS, EOM, etc...or received DCN.
Receiver is defective. (No paper, paper jamming, etc.) Receiver ceased receiving because of excessive error. (Line quality is poor) SC PCB or FXB PCB are defective.
408 XMT D Transmitter received RTN after it transmitted EOP, MPS, or EOM.
Receiver receives data with error. (Line quality is poor) Receiver is defective. (Modem, etc.)SC PCB or FXB PCB are defective.
409 XMT D Transmitter receives PIN after it transmitted a post message, such as EOP, MPS, EOM, etc.
Receiver receives data with error due to poor line quality, and receiving operator requests voice contact.Receiver is defective. (Modem, etc.)SC PCB or FXB PCB are defective.
410 RCV D Received DCN while waiting for post command. (EOP, MPS, EOM, etc.)
Interface or line is faulty.Transmitter is defective.
411 RCV(Polling)
B Received DCN after transmitting NSC.
Transmitter is not ready for polling communication. Password does not match between transmitter and receiver.
412 G3 RX B, D No response within 12 seconds in NSS/DCS/MPS wait state. (After transmitting FTT)
Transmitter is defective.SC PCB is defective.
414 RCV(Polling)
B No response received after transmitting 3rd NSC.
Password does not match between transmitter and receiver.Transmitter is defective. (No original, document jam, etc.)
Fax Information CodesCode Mode Phase Description of Problem Cause
52JUN 2004Ver. 2.0
![Page 53: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/53.jpg)
UF-9000
DP-180/190415 XMT(Polling)
B Remote side attempted to receive message from your machine in polling communication.
Inform the remote side that your machine does not have the polling transmission feature.
416 RCV D Receiver did not detect post command, such as EOP, MPS, EOM, etc.
Transmitter is defective.Line quality is poor. (RTC signal is distorted due to line noise)SC PCB or FXB PCB are defective.
417 RCV C Receiver returned RTN in response to post message.
Line quality is poor. (There are excessive errors in received data)SC PCB or FXB PCB are defective.
418 RCV C Receiver transmitted PIN in response to PRI-Q from transmitter. (Transmitting operator requests voice contact)
Line quality is poor. (There are excessive errors in received data)SC PCB or FXB PCB are defective.
420 RCV B T1 timer (35 sec.) elapsed without detecting 300 bps signal.
Incorrect incoming call type (voice). (Non-facsimile communication)Transmitter is defective.SC PCB or FXB PCB are defective.
421 RCV B Busy Tone is detected after sending NSF Signal.
Remote station disconnected the line.Wrong number is dialed.
422 XMT B Content of NSF (or DIS) or NSC (or DTC) was invalid.
There is an incompatibility.
427 G3 RCV
B DCN received to NSF/CSI/DIS transmitted.
The interface is incompatible.
434 XMT or RCV B CD (response from Modem) did not turn OFF within 180 sec. after receiver detected FLAG signal.
Remote unit is defective.SC PCB or FXB PCB are defective.
436 G3 RX C DCN received after transmitting FTT.
Transmitter is defective or incompatible.Line quality is poor.
456 RCV B Received relay transfer request or confidential document to distribute to an end receiving station or all confidential mailboxes are used.
457 RELAY XMT CONF. XMT/
POLL
B Remote unit does not have Relayed XMT or Confidential Comm. capability.
459 RCV C Failed training in Phase C. Line quality is poor. (Training signal is distorted due to line noise)SC PCB or FXB PCB are defective.
490 RCV C Sum of error lines exceeded the limit (Function Parameter No. 70) of 64 lines.
Line quality is poor.SC PCB or FXB PCB are defective.
494 RCV C Interval between two EOLs was more than 10 sec. when receiver received message data.
Transmitter is defective.Line quality is poor. (EOL is damaged due to line noise)SC PCB or FXB PCB are defective.
495 XMT RCV
C During reception, CD turned OFF or continued ON for long time. During communication, lost loop - current.
Line is disconnected.Transmitter is defective.SC PCB or FXB PCB are defective.
Fax Information CodesCode Mode Phase Description of Problem Cause
53JUN 2004Ver. 2.0
![Page 54: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/54.jpg)
UF-9000
DP-180/190496 XMT C CS of modem is not able to turn ON.
FXB PCB is defective.
501 XMT/RCV(V.34)
B Remote unit does not have compatible Modem.
502 XMT/RCV(V.34)
B, C, D During reception, CD turned OFF or continued ON for long time. During communication, lost loop - current.
Line is disconnected.Transmitter is defective.SC PCB or FXB PCB are defective.
503 XMT/RCV(V.34)
B, C, D CS of modem is not able to turn ON during training.
FXB PCB is defective.Line is disconnected.
504 RCV/V.34(Polling)
B Polling is rejected from the remote station.
No polling original is set.
505 XMT/V.34(Polling)
B Polling XMT is rejected. No polling original is set.
540 XMT ECM B No response after transmitting 3rd CTC or DCN received.
Incompatible interface.
541 XMT ECM D No response after transmitting 3rd EOR or received DCN.
Line is faulty.FXB PCB abnormal.
542 XMT ECM D No response to the 3rd RR transmitted or received DCN.
Remote unit is abnormal.
543 XMT ECM D T5 timer (60 sec.) elapsed without MCF.
Remote unit is abnormal.
544 XMT ECM D Stopped Transmission after EOR Transmission.
Line is faulty.FXB PCB abnormal.
550 RCV ECM C Timer between frames in phase C has elapsed.
Defective remote station.
554 RCV ECM D Transmitted ERR after receiving EOR.
Line is faulty.
555 RCV ECM D Transmitted PIN after receiving EOR.
Line is faulty and Operator Call requested by RX side.
570 RCV B Password or machine code did not match during remote diagnostic communication.
571 XMT B Remote unit did not have the remote diagnostic function.
580 XMT B Sub-address transmission to a unit that has their DIS bit 49 (NSF bit 155) OFF.
Sub-address transmission to a unit that has no Sub-address function.
581 XMT B Sub-address Password transmission to a unit that has their DIS bit 50 (NSF bit 156) OFF.
Sub-address transmission to a unit that has no Sub-address function.
582 XMT B Sub-address SEP (for Polling) transmission to a unit that has their DIS bit 47 (NSF bit 130) OFF.
Sub-address transmission to a unit that has no Sub-address function.
601 XMT ADF Door was opened during ADF transmission.
623 XMT A No original was in the ADF. (Built-in dialer engaged)
Operator removed the original from the ADF after dialing was completed.Original was not set properly in the ADF.
Fax Information CodesCode Mode Phase Description of Problem Cause
54JUN 2004Ver. 2.0
![Page 55: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/55.jpg)
UF-9000
DP-180/190630 XMT or RCV(Polling)
B Redial count over. No dial tone detected. Sensor dial tone is not detected. (destination dependent)Busy tone is detected. (destination dependent) T1 timer (35 ± 5 sec.) elapsed without a signal from the receiver.
631 XMT A "STOP" button was pressed during Auto Dialing.
634 XMT B Redial count over with no response or busy tone was not detected.Note:
U.S.A. and Canadian models will redial only once if a busy tone is not detected.
Telephone line cable is disconnected.Wrong number is dialed.SC or FXB PCB is abnormal.
638 XMT LAN Power turned Off with applicable data in memory or during communication.
Power switched off. Power failure occurred.
711 RCV LAN Incorrect LDAP settings. LDAP Server Name, LDAP Login Name, LDAP Password and/or LDAP Search Base are incorrect.
712 XMT LAN Unknown email address replied from the Mail Server.
Mail Server received an incorrect email address. (Dependent on Server's Mail application)
714 XMT RCV
LAN LAN Interface error.Cannot logon to the LAN.
The 10Base-T/100Base-TX cable is not connected.An unexpected LAN problem occurred.Check the SC PCB connector.
715 XMT LAN TCP/IP connection timed out. Incorrect IP Address is set.Verify the IP Address, Default Router IP Address, SMTP Server IP Address.
716 XMT LAN Cannot logon to the LAN. Incorrect SMTP Server IP Address is set.No email application is activated on the Mail Server.
717 XMT LAN Incomplete SMTP Protocol transmission.
Mail Server’s hard disk may be full.Mail Server is defective.
718 XMT LAN Page Memory Overflow occurred while receiving printing data. The paper size selected within your application to print is larger than the paper size loaded in the Tray(s).
Check the document size and resolution.Ask originator to re-send in a supported size and resolution.
719 RCV LAN Received data via LAN is in a format that is not supported.
Ask the originator to re-send with a supported file attachment:
* In a TIFF-F format.* Image data conforming to A4/Letter size.
720 POP LAN Unable to connect with the POP Server.
Incorrect POP Server address is set.POP Server is down.
721 POP LAN Unable to login to the POP Server. Incorrect User Name or Password is set.
Fax Information CodesCode Mode Phase Description of Problem Cause
55JUN 2004Ver. 2.0
![Page 56: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/56.jpg)
UF-9000
DP-180/190722 RCV LAN Failed to obtain the Network Parameters (such as: IP Address, Subnet Mask, Default Gateway IP Address, etc.) from the DHCP server.
LAN Cable is disconnected.DHCP is not available.(Contact the Network Administrator.)
725 XMT POP
LAN DNS Server connection timed out. Incorrect DNS Server address is set.DNS Server is down.
726 XMT POP
LAN Received an error response from the DNS Server.
Incorrect POP Server address is set.Incorrect SMTP Server address is set.
728 XMT LAN Received an Error or No Response from the RemoteInternet Fax. (SMTP Direct XMT)
Remote Internet Fax Errors: Busy,Memory Overflow, or No Power.Job Number Overflow for Relay XMT
729 XMT LAN Failed to authenticate (SMTP AUTHENTICATION) when connecting with the SMTP server.
SMTP AUTHENTICATION, User Name and/or Password are incorrect.(Contact the Network Administrator.)
730 RCV LAN Unable to program the Internet parameters or the autodialer with Email from a PC.
Verify that the Fax Parameter #158 is set to 2: Valid.
731 RCV LAN Dialer full while Relayed Transmission Request was received.
Dial buffer for manual number dialing (70 stations) are being used.
741 XMT, Polling PSTN Unable to dial Deleted the registered station name before dialing with Timer Controlled Communications, etc.
800 Relay Comm.
PSTN The machine was requested to relay a document but has no Relay Hub capability.
814 Conf. XMT Conf. Polling
Relay Comm.
The remote station does not have Relay XMT nor Confidential Communication capability.
815 Conf. RCV Mailbox is full.816 Conf. Polled "The received Polling Password
did not match. The machine does not have Confidential Comm. capability."
825 Conf. RCVConf. Polled
Parameter settings of the initial sending station are not properly set.
826 RCV B If applicable sub-address is not registered in the phone book of the receiver side when using sub-addressing function.
Receiver side does not have correct sub-address in their phone book.
870 MEM XMT Multi-Copy
PSTN Memory overflow occurred while storing documents into memory.
879 MemoryRCV
PSTN Memory overflow occurred during substitute memory reception.
Memory overflow on the Fax side.
LAN Memory overflow.Mail Server sent a reset command while downloading the data to the machine.
Memory overflow on the Fax side.Mail server aborted the download (Busy with other higher priority jobs).
Fax Information CodesCode Mode Phase Description of Problem Cause
56JUN 2004Ver. 2.0
![Page 57: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/57.jpg)
UF-9000
DP-180/190880 - - File Access Error.884 - - File Access Error.961 RCV LAN Memory file access error. SC PCB is defective.962 XMT PSTN Memory file access error. SC PCB is defective.
LAN Memory file access error. SC PCB is defective.
Fax Information CodesCode Mode Phase Description of Problem Cause
57JUN 2004Ver. 2.0
![Page 58: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/58.jpg)
UF-9000
DP-180/1904 Service Modes4.1. Service Modes (For Copier)These Service Modes are provided to assist the technician in checking for abnormalities in the copier and a means of making adjustments to the Input/Output of major components.
4.1.1. Service Mode Procedure
1. To select the Service ModeThe service mode is selected when “FUNCTION”, “ORIGINAL SIZE” and “3” keys are sequentially pressed, then F1 will appear in the display.
2. To exit the Service ModeThe service mode is reset when the “FUNCTION” and “CLEAR” keys are pressed simultaneously.
4.1.2. Copier Service Mode Functions
Service Modes (For Copier)Service Mode Item Function
F1 Self Test 00 CCD Test This test is used for checking the CCD.01 LCD/LED Test This test is used for checking the LCD
and LEDs.02 Page Memory Test This test is used for checking the Page
Memory.03 Print Test Pattern 1 Prints the pattern for setting the Paper
position alignment.04 Print Test Pattern 2 Prints the Slant pattern for setting the
Paper position alignment.05 Print Test Pattern 3 Prints the Grid pattern for setting the
Paper position alignment.06 Print Test Pattern 4 Prints the pattern for setting the Duplex
Paper position alignment.F2 Single Copy Test One sheet is copied when the Start key
is pressed.F3 Continuous Copy Test Multi copies are made when the Start
key is pressed.F4 Input / Output Status Test The functioning of Input / Output items
(selected item numbers) is checked.F5 Function Parameters Various function settings (selected by
code numbers) can be changed.F6 Adjust Parameters Various function settings (selected by
code numbers) can be adjusted.F7 Electronic Counter Electronic Counters for MaintenanceF8 Service Adjustment Perform pseudo-operation of an item
(selected by code numbers)
58JUN 2004Ver. 2.0
![Page 59: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/59.jpg)
UF-9000
DP-180/190F9 Unit Maintenance
00 Fax Function Parameter01 Service Alert Tel # Displays the contact number when a
machine malfunction occurs.02 Firmware Version Displays the firmware version for SC,
SC Boot, PNL, SPC, Fax Option, Slot 1.03 Print Device Info. F5/F6 Parameter, Machine / Counter /
System Address / RAM Address informations.
04 RAM Edit Mode Relative / Absolute Address.05 Serial Number Registration of Serial Number for
Maintenance.06 RAM Initialize Each RAM date clear.
Except F5, F6 Settings - refer to F6-99 "F5/F6 Initialization"
07 Firmware Update Updates the firmware in the machine Firmware Card or the USB.
08 Program Backup Refer to Sect. 2.5.09 Update Prog. Card Creates a Master Firmware Card using
the Firmware Update Kit.10 Program Copy Configuration for Program copy.11 Parameter Backup Backup the Parameter.12 Parameter Restore Restore the Parameter.13 Page Memory Size Displays the page memory size (MB).14 Sort Memory Size Displays the sort memory size (MB).
Service Modes (For Copier)Service Mode Item Function
59JUN 2004Ver. 2.0
![Page 60: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/60.jpg)
UF-9000
DP-180/190F5 / F6 Information List (Sample)
**********-F5/F6 INFORMATION LIST-****** DATE MMM-dd-yyyy *** TIME12:01 *** P.01
F5-00 . . . . . F5-50 Auto contrast adj. Yes F5-01 Frequency desired 60Hz F5-51 Dept. Counter (COPY) NoF5-02 . . . . . F5-52 Dept. Counter (FAX) NoF5-03 . . . . . F5-53 2-sided auto shift NoF5-04 LSU off timer 5 Sec. F5-54 . . . . .F5-05 . . . . . F5-55 . . . . .F5-06 . . . . . F5-56 . . . . .F5-07 . . . . . F5-57 . . . . .F5-08 . . . . . F5-58 . . . . .F5-09 . . . . . F5-59 Ope.add toner alarm Stop
F5-10 Exit Tray Limitation None F5-60 Auto Tray selection YesF5-11 . . . . . F5-61 . . . . .F5-12 . . . . . F5-62 . . . . .F5-13 Paper out Indicator On F5-63 U13 clear Any keysF5-14 Paper size (Tray1) Letter-R F5-64 Dept. Counter (SCAN) NoF5-15 Paper size (Tray2) Letter-R F5-65 Dept. Counter (PRINT) NoF5-16 . . . . . F5-66 . . . . .F5-17 . . . . . F5-67 . . . . .F5-18 . . . . . F5-68 . . . . .F5-19 . . . . . F5-69 Reduce N in 1 space No
F5-20 ADF Auto F5-70 PM cycle 85KF5-21 . . . . . F5-71 . . . . .F5-22 . . . . . F5-72 . . . . .
60JUN 2004Ver. 2.0
![Page 61: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/61.jpg)
UF-9000
DP-180/1902.FIRMWARE VERSION SC : BAT001xxAU
1.MACHINE INFORMATION MACHINE NAME : UF-9000 MAC ADDRESS : 080023016C81 SERIAL NUMBER :
SC BOOT : V006 PNL : V010018 SPC(SCANNER) : V6493 PRINTER : V00039 FAX MODEM : Ver 6D01 PDL FONT1 : CAV10000b SC2 : CAV13500aAU
3.MEMORY CAPACITY PAGE MEMORY : 32 MB SORT MEMORY : 16 MB FAX MEMRY : 2 MB 4.OPTION 2nd PAPER FEED MODULE : No PCL PRINTER : No PS PRINTER : No HDD : No
5.ERROR LOG TOTAL PRINT COUNT : 503 NO. DATE & TIME ERROR CODE ERROR COUNT NO. DATE & TIME ERROR CODE ERROR COUNT -------------------------------------------------------------------------------- 01 MMM-dd-yyyy 11:11 J97 XX-00000008 02 MMM-dd-yyyy 11:31 J44 XX-00000140 (See Remarks) --------------------------------------------------------------------------------
**********-MACHINE SETUP INFORMATION-****** DATE MMM-dd-yyyy *** TIME12:01 *** P.01
******************************* - - ***** - 0001- *********
Machine Setup Information List (Sample)
Remarks: XX-00000140
00 : Printer Error 02 : Scanner Error
Page Count
-PANASONIC -
61JUN 2004Ver. 2.0
![Page 62: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/62.jpg)
UF-9000
DP-180/190F7 Total Counter List (Sample)
F7-01 Key Operator ID Code : 000
F7-02 Total Count : 295F7-03 PM Count : 295F7-04 Scanner PM Count : 61F7-05 . . . . . : F7-06 OPC Drum Count : 295F7-07 Process Unit Count : 295F7-08 ADF PM Count : 50F7-09 . . . . . :F7-10 . . . . . :
F7-11 Sheet Bypass Count : 147F7-12 1st Paper Tray Count : 90F7-13 2nd Paper Tray Count : 0F7-14 . . . . . :F7-15 . . . . . :F7-16 2-Sided Count : 28F7-29 . . . . . :F7-30 A4R/LTR Count : 73F7-31 . . . . . :F7-32 FLS/LG Count : 0
F7-17 ADF Count : 26F7-18 ADF Read Count : 26F7-19 Scanner Count : 61F7-20 Scanner Read Count : 18
F7-21 Copy Rint Count : 59F7-22 Copy Scan Count : 180
F7-23 PC Rint Count : 0F7-24 PC Scan Count : 3
F7-24 Fax Transmit Count : 24F7-24 Fax Receive Count : 27F7-24 Fax Print Count : 21
Serial Number :
**********-F7 TOTAL COUNTER LIST-****** DATE MMM-dd-yyyy *** TIME12:01 *** P.01
62JUN 2004Ver. 2.0
![Page 63: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/63.jpg)
UF-9000
DP-180/1904.1.3. F4 Mode: Input/Output Status Test
Set the machine to service mode and press "4" key on the Keypad.↓
Press the "START" key.↓
Select “1:Check Input“ or “2:Check Output“ to activate the test then press "START" key.↓
Press "STOP" key to cancel the test.↓
When the “CLEAR” key is pressed, the selected code input will not be accepted.↓
Press “FUNCTION” and “CLEAR” keys simultaneously to exit the service mode.
1. Check Input
2. Check Output Press the "START" key to start and press the "STOP" key to reset.
F4 Mode (Check Input)
No. Function Condition Message Display Remarks7 6 5 4 3 2 1 0
021 Home Position Sensor Home position is detected.
1
ADF Cover Open Sensor ADF Cover is open. 1
F4 Mode (Check Output)No. Item Function Remark120 Lamp When SPC PCB P103-8, Inverter
CN1-2 signal level changes to 0V from Open, Lamp operates.
The CCD / Inverter shall be replaced as the Assembly
63JUN 2004Ver. 2.0
![Page 64: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/64.jpg)
UF-9000
DP-180/1904.1.4. F5 Mode: Function Parameters (For Copier)
Set the machine to Service Mode and press "5" key on the Keypad.↓
Press the "START" key.↓
Enter the desired code number or press “V”, ”/\” arrow keys.↓
Press the "SET" key.↓
Enter the desired function code number and press “SET” key.↓
When the “CLEAR” key is pressed, the selected code input will not be accepted.↓
Press “STOP” key, then press “FUNCTION” and “CLEAR” keys simultaneously to exit the service mode.↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
F5 ModeNo. Item Function Default Setting00 Not Used01 Frequency Desired 0 : Auto
1 : 50 Hz2 : 60Hz
2 (for USA / Canada)
1 (for Europe)02-03 Not Used
04 LSU Off Timer 1 : 5 sec. 2 : 10 sec. 3 : 15 sec. 4 : 20 sec. 6 : 30 sec. 8 : 40 sec.10 : 50 sec.12 : 60 sec.
1
05-09 Not Used10 Exit Tray Limitation
(Up to 150 Sheets)0 : None1 : Accumulate2 : Job
0(Effective from June 2004 Production)
11-12 Not Used13 Paper Out Red Indicator 0 : On
1 : Off0
14 Paper Size (Tray 1)(UF-9000)
4 : A4-R12 : LEGAL14 : LETTER-R
14 (for USA / Canada)
4 (for Europe / Others)
Paper Size (Tray 1)(DP-180/190)
4 : A4-R 6 : B5-R 8 : A5-R12 : LEGAL14 : LETTER-R
64JUN 2004Ver. 2.0
![Page 65: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/65.jpg)
UF-9000
DP-180/19015 Paper Size (Tray 2)(UF-9000)
4 : A4-R12 : LEGAL14 : LETTER-R 14 (for USA / Canada)
4 (for Europe / Others)Paper Size (Tray 2)(DP-180/190)
4 : A4-R 6 : B5-R 12 : LEGAL14 : LETTER-R
16-19 Not Used20 ADF 0 : No
1 : Auto1
21-37 Not Used38 Duplex Mode Default
(UF-9000)0 : No1 : 1 to 22 : 2 to 2
0
39 Not Used40 Double Count 0 : No
2 : LGL0 : UF-9000/DP-190
41 Count Up Timing 0 : At feed1 : At exit
1
42 KEY/DEPT. Counter 0 : No2 : DEPT.
2
43 Key Counter Timing Same as F5-41 044-49 Not Used
50 Auto Contrast Adjust 0 : No1 : Yes
1
51 Dept. Counter (COPY) 0 : No1 : Yes
0
52 Dept. Counter (FAX) 0 : No1 : Yes
0
53-58 Not Used59 Oper. Add Toner Alarm 0 : Stop
1 : Continue0
60 Auto Tray Selection 0 : No1 : Yes
1
61-62 Not Used63 U13 Clear
(DP-180/190 only)0 : Any keys1 : Func + 1
0
64 Dept. Counter (SCANNER) 0 : No1 : Yes
0
65 Dept. Counter (PRINTER) 0 : No1 : Yes
0
66-68 Not Used69 Reduce N in 1 Space 0 : No
1 : Yes0
F5 ModeNo. Item Function Default Setting
65JUN 2004Ver. 2.0
![Page 66: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/66.jpg)
UF-9000
DP-180/19070 PM Cycle 0 : No 1 : 1.5 K 2 : 2.5 K 3 : 5 K 4 : 10 K 5 : 15 K 6 : 20 K 7 : 30 K 8 : 40 K 9 : 60 K10 : 85 K*11 : 90 K12 : 120 K13 : 150 K14 : 200 K15 : 240 K
0 (for UF-9000)Effective from April 2004 Production
10 (for DP-180/190)
* Effective from June 2004 Production
71-78 Not Used79 Image Process Method 0 : Error Diffusion
1 : Dither0
80 Paper Size Priority 4 : A4-R 5 : B5 7 : A5 9 : FLS110 : FLS212 : LEGAL14 : LETTER-R
14 (for USA / Canada)
4 (for Europe / Others)
81 Foolscap Size 1 : FLS12 : FLS2
1
82 Not Used83 Digital Skyshot Mode 0 : Off
1 : On0
84 Paper Tray Priority 0 : S > C > B1 : C > S > B
0
85 Side Void Setting (ADF) 0 : No1 : Yes
0
86 PM Cycle (Optics) 0 : No1 : 40 K2 : 60 K3 : 120 K4 : 240 K5 : 360 K6 : 480 K7 : 600 K
0
87 PM Cycle (ADF) 0 : No1 : 40 K2 : 60 K3 : 120 K4 : 240 K5 : 360 K6 : 480 K7 : 600 K
0
F5 ModeNo. Item Function Default Setting
66JUN 2004Ver. 2.0
![Page 67: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/67.jpg)
UF-9000
DP-180/19088 USB Port Function 0 : Off1 : Once2 : On
0
89 LAN Speed/Duplex 0 : Auto 1 : 10 Half 2 : 10 Full 3 : 100 Half 4 : 100 Full
0
90 Beep Sound 0 : Off1 : Soft2 : Loud
1
91-94 Not Used95 Paper Size (FA)
(Factory use only)0 : Japan1 : USA/CAN2 : Europe3 : Other
1 (for USA / Canada)2 (for Europe)
96-97 Not Used
F5 ModeNo. Item Function Default Setting
67JUN 2004Ver. 2.0
![Page 68: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/68.jpg)
UF-9000
DP-180/1904.1.5. F6 Mode: Adjust Parameters (For Copier)
Set the machine to Service Mode and press "6" key on the Keypad.↓
Press the "START" key.↓
Enter the desired code number or press “V”, ”/\” arrow keys.↓
Press the "SET" key.↓
Enter the desired function code number and press “SET” key.↓
When the “CLEAR” key is pressed, the selected code input will not be accepted.↓
Press “STOP” key, then press “FUNCTION” and “CLEAR” keys simultaneously to exit the service mode.↓
Reboot the machine after setting the parameter(s) to activate the setting(s).Note:
1. The Factory Setting is different in each model.2. The machine may accept a (+/-) input value that exceeds the specified Setting Range for the
parameters in the table; however, the actual registered value will not exceed the Upper/Lower Limitation value.
F6 Mode
No. Item Remarks Setting Range
00-02 Not Used03 Original Registration Adjustment of platen original registration
detection timing.-30 - +30 0.2mm
04 Printer Registration Delay time is adjusted from registration roller clutch ON.
-50 - +16 0.5mm
05-06 Not Used07 Registration Void Registration void should be adjusted. 0 - +99
0.5mm08 Trail Edge Read Timing Adjustment of trail edge void. -9 - 0
0.5mm09 Trail Edge Print Timing Adjustment of trail edge void. -9 - +15
0.5mm10 Side Adjust (Bypass) Adjustment of LSU side-side (Sheet Bypass). -8 - +7
0.5mm11 Side Adjust (Tray 1) Adjustment of LSU side-side (1st Tray). -8 - +7
0.5mm12 Side Adjust (Tray 2) Adjustment of LSU side-side (2nd Tray). -8 - +7
0.5mm13-15 Not Used
16 Side Adjust (ADU) Adjustment of LSU side-side (ADU). -8 - +7 0.5mm
17-32 Not Used33 TDC Max. Read Only Set by Digital QUANTUM (QUARC) control -99 - +99
(Read only)34 TDC Min. Read Only Set by Digital QUANTUM (QUARC) control -99 - +99
(Read only)
68JUN 2004Ver. 2.0
![Page 69: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/69.jpg)
UF-9000
DP-180/19035 TDC Avg. Read Only Set by Digital QUANTUM (QUARC) control -99 - +99 (Read only)
36-38 Not Used39 LSU Unit PWM Adjust Adjustment of PWM value of LSU. -32 - +3240 Trans Current Side 1 Adjustment of Transfer Current. -77 - +76
0.15uA41-43 Not Used
44 FAX Laser Duty Adj Printer Density Adjustment for FAX. (-) : Darker.(+) : Lighter.
-99 - +99
45 Not Used46 PRINTER Laser Duty Adj Printer Density Adjustment for Printer.
(-) : Darker.(+) : Lighter.
-99 - +99
47-48 Not Used49 TEXT Image Density Image density adjustment for Text mode.
(-) : Darker.(+) : Lighter.
-99 - +99
50 T/P Image Density Image density adjustment for Text/ Photo mode.(-) : Darker.(+) : Lighter.
-99 - +99
51 PHOTO Image Density Image density adjustment for Photo mode.(-) : Darker.(+) : Lighter.
-99 - +99
52 Not Used53 CCD Read Position Adjustment of CCD read position. -42 - +44
0.2mm54 TEXT Mode Contrast Adjustment of Contrast for Text Mode. -128 - +12755 T/P Mode Contrast Adjustment of Contrast for Text/Photo Mode. -128 - +12756 PHOTO Mode Contrast Adjustment of Contrast for Photo Mode. -128 - +127
57-62 Not Used63 Lead Edge Read Timing Adjustment of Lead Edge Read Point. 0 - +9
0.5mm64 Side Edge Read Adjust Adjustment of Side Edge Read Point. 0 - +9
0.5mm65-66 Not Used
67 ADF Image Density Compensation of ADF image density. -99 - +9968 Not Used69 Stamp Position Adjust Adjustment of verification stamp position. -50 - +50
0.3mm70-78 Not Used
79 MTF Adjust Adjustment of Scanning Sharpness by digital image processing for Text /Photo Copy Mode.
-2 - +2
80-89 Not Used90 ADF Image Read Start Adjustment of ADF horizontal image read
start position. -99 - +99 0.05mm
F6 Mode
No. Item Remarks Setting Range
69JUN 2004Ver. 2.0
![Page 70: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/70.jpg)
UF-9000
DP-180/1904.1.6. F7 Mode: Electronic Counter
Set the machine to Service Mode and press "7" key on the Keypad.↓
Press the "START" key.↓
Enter the desired code number or press “V”, ”/\” arrow keys.↓
Press the "SET" key.↓
Enter the desired function code number and press “SET” key.↓
When the “CLEAR” key is pressed, the selected code input will not be accepted.↓
Press “STOP” key, then press “FUNCTION” and “CLEAR” keys simultaneously to exit the service mode.↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
91 Original Lead ADF Adjustment of original detection timing. -99 - +99 0.3mm
92 Original Trail ADF Adjustment of trail edge detection timing. -90 - +127 0.3mm
93-98 Not Used99 F5/F6 Initialization Initialize F5/F6 parameter settings.
F7 ModeNo. Item Remarks01 Key Operator ID Code Key Operator’s identification code for access to the
counter mode.02 Total Count Total count for all copies / prints.03 PM Count Preventive Maintenance count.04 Scanner PM Count PM count for scanner readings.05 Not Used06 OPC Drum Count PM count of recording paper fed through the OPC
Drum.07 Process Unit Count PM count of recording paper fed through the
Process Unit.08 ADF PM Count PM count of originals fed through the ADF.
09-10 Not Used11 Sheet Bypass Count Total count of paper fed from the sheet bypass.12 1st Paper Tray Count Total count of paper fed from the 1st paper tray.13 2nd Paper Tray Count Total count of paper fed from the 2nd paper tray.
14-15 Not Used16 2-sided Count Total count of 2-sided Print.17 ADF Count Total count of originals fed through the ADF.18 ADF Read Count Total count of originals scanned through the ADF.
F6 Mode
No. Item Remarks Setting Range
70JUN 2004Ver. 2.0
![Page 71: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/71.jpg)
UF-9000
DP-180/1904.1.7. F8 Mode: Service Adjustment
Set the machine to Service Mode and press "8" key on the Keypad.↓
Press the "START" key.↓
Enter the desired code number or press “V”, ”/\” arrow keys.↓
Press the "SET" key.↓
Enter the desired function code number and press “SET” key.↓
Press “STOP” key, then press “FUNCTION” and “CLEAR” keys simultaneously to exit the service mode.↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
19 Scanner Count Total count of scanning operations.20 Scanner Read Count Total count of scanner readings.21 Copy Print Count Total count of copies printed.22 Copy Scan Count Total count of copies scanned.23 PC Print Count Total count printed from PC.24 PC Scan Count Total count scanned to PC.25 Fax Transmit Count Total count of Fax transmitted.26 Fax Receive Count Total count of Fax received.27 Fax Print Count Total count of Fax printed.
28-29 Not Used30 A4R / LETTER R Count Total count of A4-R / Letter-R Print.31 Not Used32 FLS / LEGAL Count Total count of FLS / Legal Print.99 All Counter Clear All counters are cleared.
F8 ModeNo. Item Remarks
00-05 Not Used06 Error Log View a) Each time the arrow key is pressed, the machine
errors or paper jam codes stored in memory are displayed, beginning with the oldest code.
Note:Only the 30 most recent codes are displayed.
07 Error Log Clear a) Press the Reset key.A Message "Error code can be cleared with the Start key" is displayed on the LCD.*
b) Press the Start key.08 (Factory use only) Lock operation for Scanner Unit.
09-17 Not Used18 C18 PRT PWM ADJ.PTN.
(LSU PWM Pattern)Print out the Test Pattern.Proceed when the LSU is replaced.
F7 ModeNo. Item Remarks
71JUN 2004Ver. 2.0
![Page 72: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/72.jpg)
UF-9000
DP-180/19019 Move Mirror To Lock a) Press the Start key to move the mirror unit to the locked position for transporting the copier.
b) When the mirror unit is locked, the machine will not accept any numerical key input.
Note:The locking operation is automatically reset when the Power switch is turned ON again.
20-46 Not Used47 C47 ADF Scan Test Place the document on the ADF first.
Press START key to begin.48 C48 Book Scan Test Press START key to begin.
Press STOP key to finish.49-54 Not Used
F8 ModeNo. Item Remarks
72JUN 2004Ver. 2.0
![Page 73: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/73.jpg)
UF-9000
DP-180/1904.1.8. F9 Mode: Unit Maintenance
Set the machine to Service Mode and press "9" key on the Keypad.↓
Press the "START" key.↓
Enter the desired code number or press “V”, ”/\” arrow keys.↓
Press the "SET" key.↓
Enter the desired function code number and press “SET” key.↓
When the “CLEAR” key is pressed, the selected code input will not be accepted.↓
Press “STOP” key, then press “FUNCTION” and “CLEAR” keys simultaneously to exit the service mode.↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
F9 ModeService Mode Item Remarks
F9 Unit Maintenance
00 Fax Function Parameter01 Service Alert Tel # Displays the contact number when a
machine malfunction occurs.02 Firmware
Version00 SC Displays the firmware version for SC.01 SC Boot Displays the firmware version for SC
Boot.02 PNL Displays the firmware version for PNL.03 SPC (Scanner) Displays the firmware version for SPC.04 Printer Displays the firmware version.05 FAX Modem Displays the firmware version for FAX
Option 1.06 Not Used07 SC2 Displays the firmware version for Slot 1.
03 Print Device Info.
00 F5/F6 Parameters Prints the memory contents of the F5 and F6 modes.
01 Machine Information Prints the machine setup information list.02 Counter Information Prints the Counter information list.03 System Address
Info.Prints the system memory setting.
04 RAM Address Information
Prints the RAM data dump list.
04 RAM Edit Mode
1 Relative Address Setting of Relative address.2 Absolute Address Setting of Real address.
05 Serial Number Registration of Serial Number for Maintenance.Clears by Shipment Set.
73JUN 2004Ver. 2.0
![Page 74: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/74.jpg)
UF-9000
DP-180/190F9 Unit Maintenance
06 RAM Initialize
00 Parameter Initialize Resets the Fax and Function parameters to default values.
01 All Job Clear Clears all Jobs stored in Flash Memory.02 LBP Error Log Clear Clears LBP Error log03 Shipment Set Clears All Jobs, All Preset Data,
Parameter Initialize & Resets the Counters (Fax).
04 LBP Fuser Reset Clears the LBP fuser error.05 Dept. Counter Clear
07 FirmwareUpdate
00 Update FROM Card Updates the firmware in the machine with the Master Firmware Card.
01 Update from USB Updates the firmware in the machine with the USB.
08 ProgramBackup(Refer toSect. 2.5. of the Service Manual)
00 Main Onboard F-ROM 4MB01 Option 1 all Slot 1 FRM8 PCB 8MB02 Option 1 a Slot 1 FRM8 PCB 4MB (a)03 Option 1 b Slot 1 FRM8 PCB 4MB (b)04 Not Used Slot 2 FRM8 PCB 8MB05 Not Used Slot 2 FRM8 PCB 4MB (a)06 Not Used Slot 2 FRM8 PCB 4MB (b)
09 Update Prog. Card Creates a Master Firmware Card using the Firmware Update Kit. A 4MB or 8MB Flash Memory Card will be required depending upon the model.
10 ProgramCopy
00 From card to slot 1 Configuration for Program copy.01 From card to slot 202 From slot 1 to card03 From slot 1 to slot 204 From slot 2 to card05 From slot 2 to slot 1
11 Parameter Backup Backup the Parameter.12 Parameter Restore Restore the Parameter.13 Page Memory Size Displays the page memory size (MB).14 Sort Memory Size Displays the sort memory size (MB).
F9 ModeService Mode Item Remarks
74JUN 2004Ver. 2.0
![Page 75: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/75.jpg)
UF-9000
DP-180/1904.2. Service Modes (For Facsimile)4.2.1. Fax Service Mode Procedure
1. To entet the Fax Service Modea. Press “FAX/EMAIL” key.b. Press “FUNCTION” and then “7” keys.c. Press “MONITOR” four times, then press “*”.d. Enter the desired code number or press the “V”, ”/\” arrow keys.
2. To exit the Fax Service ModePress “STOP” key.
Note:The following buttons provide these functions in the Service Mode:
4.2.2. FAX Service Mode TableThe following service modes are provided to assist you in setting operational functions of the unit and determining the condition of the unit.
"START": : The new setting value is stored in the machine."V” : Scroll the function parameter number down."/\ “ : Scroll the function parameter number up.
Service Modes (For Facsimile)No. Service Mode Description00 Not Used01 Function Parameter Setting Allows changes to the function parameters (the home position,
etc.).02 RAM Edit Mode Factory use only.03 Print Parameter List / Report Prints the Function Parameter List, Page Memory Test, Printer
Report, All Document File, Protocol Trace and Toner Order Form.
04 Modem Tests Generates various binary, tonal and DTMF signals, by the modem.
05 Not Used06 RAM Initialize Initialize RAM and restore the default value of the function
parameters.Note: Turn the Power Switch to the OFF and back to the ON position to enable the parameter settings.
07 Not Used08 Check & Call Allows input of information for Service Alert Report,
Maintenance Alert Report and Toner Order Form.09 System Maintenance Used for Firmware Update, Firmware Backup, Parameter
Restore, Parameter Backup, Transferring Firmware from the PC to the Flash Card and Sending a Received File during a fatal printer error.
75JUN 2004Ver. 2.0
![Page 76: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/76.jpg)
UF-9000
DP-180/19010 Firmware Version
00 SC Displays the firmware version for SC.01 SC Boot Displays the firmware version for SC Boot.02 PNL Displays the firmware version for PNL.03 SPC (Scanner) Displays the firmware version for SPC.04 Not Used05 FAX Modem Displays the firmware version for FAX.06 Not Used07 SC2 Displays the firmware version for Slot 1.
Service Modes (For Facsimile)No. Service Mode Description
76JUN 2004Ver. 2.0
![Page 77: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/77.jpg)
UF-9000
DP-180/1904.2.3. Fax Service Mode 1 (Function Parameter Setting)Use the following procedure to change the function parameters.
Enter the desired code number and press “START” key.↓
If you wish to select another code number, scroll the menu with the “V”, ”/\” arrow keys.↓
Select the desired function code and press the "START" key.↓
When the “CLEAR” key is pressed, the selected code input will not be accepted.↓
Press “STOP” key, then press “FUNCTION” and “CLEAR” keys simultaneously to exit the service mode.
Function Parameter TableNo. Parameter Selections Function000 Monitor/Tel Dial 1 = Monitor
2 = Tel/DialSelects whether the machine starts to TX automatically during On-Hook dialing.Monitor : Start to TX after pressing STARTTEL/DIAL : Start to TX automatically
001 Alarm Status 1 = Off2 = Timer3 = Constant
Selects the No Paper or No Toner alarm status.OFF : Alarm is disabled.Timer : Alarm will shut off after 6 seconds.Constant : Alarm will not stop until "STOP" is
pressed or the error is cleared/corrected.
002 Stop Comm. JRNL
1 = Off2 = On
Selects whether the machine prompts to print the COMM. Journal when the printout condition is set to INC and STOP is pressed during communication.
003 Continuous Poll 1 = Off2 = Stn (Tx only)3 = Hub (Rx only)
Selects whether the Continuous Polling feature is enabled.Stn : Place the document(s) on the ADF or Platen,
then press the assigned Program Key to store or add the documents into a polled file. (See Note 1)
Hub : When the polling command is initiated, the machine will continuously poll originals from the remote stations until it is interrupted by pressing "STOP".
004 Numeric ID Set 1 = Off (will not accept)2 = On (accepts)
Selects whether the machine accepts and allows to set or change the Numeric ID.
77JUN 2004Ver. 2.0
![Page 78: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/78.jpg)
UF-9000
DP-180/190005 Destination Code(DP-180/190 only)
000 : Austria001 : U.K.002 : Canada003 : Denmark004 : Taiwan005 : Finland006 : Germany007 : Netherlands008 : Italy009 : Spanish010 : Hong Kong011 : Australia012 : Switzerland013 : Norway015 : Portuguese016 : Ireland017 : Belgium018 : Sweden019 : Turkey020 : U.S.A.021 : France022 : New Zealand025 : Japan029 : Poland030 : Czech031 : Russia032 : Greece033 : Hungary034 : Indonesia035 : South Korea038 : Malaysia039 : China045 : Thailand048 : South Africa049 : Singapore050 : Universal051 : East Euro999 : Initialize
Specified destinations only.
006 ID Display 1 = Number (Numeric ID)2 = Chara (Character ID)
Selects the priority of displaying the ID.
007 JRNL Column 1 = Station2 = RCV’D ID
Selects the contents of the ID to display on the Journal.
008 Monitor 1 = Off2 = On
Selects whether the Monitor is ON/OFF for monitoring fax signals.(FOR SERVICE USE ONLY)
009 DC Loop 1 = Off (Normal)2 = On (Off Hook)
Selects a false Off Hook state for back to back communication test.
010 TX Level 00 = 0 dBm~15 = -15 dBm
Selects the TX signal output level, 0 to -15 dBm in 1 dBm steps.
Function Parameter TableNo. Parameter Selections Function
78JUN 2004Ver. 2.0
![Page 79: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/79.jpg)
UF-9000
DP-180/190011 RX Level 1 = -43 dBm2 = -38 dBm3 = -33 dBm4 = -48 dBm
Selects the receiving sensitivity of -33/-38/-43/-48 dBm.
012 DTMF Level 00 = 0 dBm~15 = -15 dBm
Selects the DTMF output level, 0 to -15 dBm in 1 dBm steps.
013 G3 RX EQL 1 = 0dB2 = 4dB3 = 8dB4 = 12dB
Selects the cable equalizer for G3 reception mode, 0dB, 4dB, 8dB or 12dB.
014 G3 TX EQL 1 = 0dB2 = 4dB3 = 8dB4 = 12dB
Selects the cable equalizer for G3 transmission mode, 0dB, 4dB, 8dB or 12dB.
015 ~ 016
Not Used
017 TX Start 2400 bps4800 bps7200 bps9600 bpsTC7200 bpsTC9600 bps12000 bps14400 bps
Selects the transmission modem start speed, 14400/12000/TC9600/TC7200/9600/7200/4800/2400 bps.
Press “V” or “/\ “ to select the symbol rate.Note:
This parameter is applicable only when communicating with regular G3 machines. When communicating with Super G3 (V.34) machines, use Parameter No. 32.
018 RX Start 2400 bps4800 bps7200 bps9600 bpsTC7200 bpsTC9600 bps12000 bps14400 bps
Selects the reception modem start speed, 14400/12000/TC9600/TC7200/9600/7200/4800/2400 bps.
Press “V” or “/\ “ to select the symbol rate.Note:
This parameter is applicable only when communicating with regular G3 machines. When communicating with Super G3 (V.34) machines, use Parameter No. 33.
019 ITU-T V.34 1 = Off2 = On3 = Select
Selects whether the ITU-T V.34 is Off, On or Select.Select: Select whether the ITU-T V.34 is Off or On,
when entering Phone Book Dialing Numbers or Manual Number Dialing.
020 ITU-T ECM 1 = Off (Invalid)2 = On (Valid)
Select the ECM mode.
021 EP Tone 1 = Off (without EP Tone)2 = On (with EP Tone)
Selects whether to add the echo protect tone on V.29 mode.(Used when Echo Suppression is disabled.)On : AddOff : Do not add
022 Signal Interval 1 = 100 ms2 = 200 ms3 = 500 ms
Selects the time interval between the receiving signal and the transmitting signal.
023 TCF Check 1 = Normal (Short)2 = Long
Selects the TCF check interval Long/Short
024 CED Frequency 1 = 1080 Hz (non ITU-T)2 = 2100 Hz
Selects the CED frequency 2100/1080 Hz
Function Parameter TableNo. Parameter Selections Function
79JUN 2004Ver. 2.0
![Page 80: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/80.jpg)
UF-9000
DP-180/190025 COMM. Start-Up 1 = First2 = Second
Selects the communication start-up condition (XMT and Polling).(Used when Echo Suppression is disabled.)
026 Non-Standard 1 = Off (Invalid)2 = On (Valid)
Selects own mode (Panafax mode).
027 Short Protocol B 1 = Off (Invalid)2 = On (Valid)
Selects the short protocol mode.
028 Short Protocol D 1 = Off (Invalid)2 = On (Valid)
Selects the short protocol mode. When activated, it allows the machine to automatically store the modem speed for each Auto Dial Number.
029 Remote Diagnostics
1 = Off (will not accept)2 = On (accepts)
Selects whether the machine accepts Remote Diagnostics from the service station.
030 CED & 300 bps 1 = 75 ms2 = 1 sec
Selects the pause interval between the CED and the 300 bps signal. (Used when Echo Suppression is disabled.)
031 RTC = EOL x 12 1 = Off (EOLx6)2 = On (EOLx12)
Selects the RTC signal, EOLx6 or EOLx12.
032 V34 TX Start 2400-33600bps Selects the transmission modem start speed for V.34 communication, 33600-2400 bps.
Press “V” or “/\ “ to select the symbol rate.033 V34 RX Start 2400-33600bps Selects the receiving modem start speed for V.34
communication, 33600-2400 bps.Press “V” or “/\ “ to select the symbol rate.
034 V34 TX SR 2400-3429sr Selects the transmission symbol rate for V.34, 3429/ 3200/3000/2800/2400 sr.
Press “V” or “/\ “ to select the symbol rate.035 V34 RX SR 2400-3429sr Selects receiving symbol rate for V.34, 3429/3200/
3000/2800/2400 sr.Press “V” or “/\ “ to select the symbol rate.
036 Not Used037 Protocol Display 1 = Off (not displayed)
2 = On (displayed)Selects whether to display the modem speed during communication. (Press the Job Status Key to display)
038 Not Used039 Flash Time 5 = 50 ms
~100 = 1000 ms
Selects the pause interval before activating the Flash key.
040 Flash Time (PSTN)
5 = 50 ms~100 = 1000 ms
Selects the pause interval before activating the Flash key.(For Germany, Austria and Czech)
041 Pause Time 1 = 1 sec.~10 = 10 sec.
Selects the pause interval from 1 sec. ~ 10 sec. for dialing through a switchboard or for international calls.
042 Not Used043 Redial Interval 0 = no waiting
~15 = 15 minutes
Selects the redial interval from 0 to 15 minutes in 1 minute steps.
Function Parameter TableNo. Parameter Selections Function
80JUN 2004Ver. 2.0
![Page 81: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/81.jpg)
UF-9000
DP-180/190044 Redial Count 0 = no redial~15 = 15 times
0 ~ 9 (For Australia Only)
Selects the redial count from 0 to 15 times in 1 step intervals.Note:
In order to comply with the requirements TBR21 in the EC countries, do not select 15 times.
045 Ring Detect Count
1 = 1 ring~9 = 9 rings
Selects the ring detection count from 1 to 9 rings in 1 ring step intervals.
046 On-Hook Time 0 = 0 sec.~90 = 90 sec.
Selects the on-hook time between sequential communication calls in 1 second step intervals.
047 Response Wait Interval
1 = 1 sec.~90 = 90 sec.
20 ~ 150 sec. (For France Only)
Selects the waiting interval for the response after completing the dialing.
048~ 049
Not Used
050 Ring Detect Mode 1 = Normal2 = Rough
Selects the quality of ringer detection. Use if the line signal is out of regulation, set to "Rough" so that the unit may detect the ringing signals.
051 Not Used052 Pulse Rate 1 = 10 pps
2 = 20 ppsSelects the dial pulse rate 10/20 pps.
053~ 054
Not Used
055 Busy Tone Check 1 = Off2 = On
Selects whether to detect the Busy Tone.
056 Dial Tone Check(Specified destinations only)
1 = Off2 = On
Selects whether to detect Dial Tone before dialing the telephone number.
057 DC Loop Check(Specified destinations only)
1 = Off2 = On
Selects whether the unit checks the DC Loop during communication.
058 Comm. JRNL + Image
1 = Off (without image)2 = On (with image)
Selects whether the machine prints the COMM. Journal with image.
059 Confidential RCV Report
1 = Off (does not print out)2 = On (prints out)
Selects whether the machine prints the Confidential RCV Report.
060 Version Indicates the Host software version.
061 TX/RX/PRT/CPY TX:****** PRT:******RX:****** CPY:******
Displays the transmitted, received, total printed and copied document count.
062 Print Counter 1 = Off2 = On
Selects whether to print in the Fax Parameter List, the counter information that is displayed in the Function Parameter No. 61.
063~ 067
Not Used
Function Parameter TableNo. Parameter Selections Function
81JUN 2004Ver. 2.0
![Page 82: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/82.jpg)
UF-9000
DP-180/190068 NYSE Fax Forward(USA and Canada Only)
1 = Off2 = On
Selects whether the machine will forward the incoming and outgoing faxes to a specified station.Note:
Once this parameter is activated, Fax Forwarding via Fax Parameter 054 is automatically disabled, an Access Code of "0000" is automatically assigned and Fax Parameter 038 has a new setting added called "NYSE".
069 NYSE Local Print(USA and Canada Only)
1 = Inc2 = On (Always)
Selects the printing condition for the incoming faxes after FAX Forwarding.INC. : Prints only if FAX Forwarding fails.ON : Always prints.
070 Line Error 128 lines256 lines512 lines1024 line2048 linesOff(will not disconnect line)
1. Selects the line disconnect condition during reception. If the number of line errors exceed this setting, the unit will disconnect the line.
Press “V” or “/\ “ to select the symbol rate.2. Selects the transmit condition of RTP/PIP or
RTN/PIN. (Available if No.73 Error Detect is set to "LINES") (See Note 1)
071 Total Error 1 = 5%2 = 10%3 = 15%4 = 20%
Selects the transmit condition of RTP/PIP or RTN/PIN.(Available if No.73 Error Detect is set to "RATE".)(See Note 2)
072 Continuous Error 1 = Off (unlimited)2 = 3 lines/STD3 = 6 lines/STD4 = 12 lines/STD
Selects the continuous total error criteria of Off/3/6 or 12 lines in Standard mode. If continuous total error exceeds this setting, the unit will transmit RTN/PIN. (Available if No.73 Error Detect is set to "RATE".)
073 Error Detect 1 = Lines2 = Rate
Selects the error detect condition Lines/Rate.
074 RTN Receive 1 = Disconnect2 = Continue
Selects whether to disconnect the phone line or continue when "RTN" is received.
075 Coding 1 = MH (MH only)2 = MR (MH or MR)3 = MMR (MH or MR or MMR)4 = JBIG
Selects the coding scheme.
076 Batch TX(USA and Canada Only)
1 = Off2 = On
Selects whether the batch transmission is available.
077 RX JAM Length 1 = Off (unlimited)2 = 2 m
Selects the maximum length of a received document that can be printed.
078~ 079
Not Used
080 Doc Top Feed -99~+99
Adjusts the distance between the scanning sensor ON position and the scanning start position.
081 Doc End Feed -90~+127
Adjusts the distance between the scanning sensor OFF position and the scanning end position.
Function Parameter TableNo. Parameter Selections Function
82JUN 2004Ver. 2.0
![Page 83: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/83.jpg)
UF-9000
DP-180/190082 JAM Length 1 = 1 m2 = 2 m
Selects the maximum length of the original that can be scanned.
083 Not Used084 Line As No Paper 1 = Ring (ring)
2 = Busy (keep line busy)Selects whether to ring or send a busy tone to the remote station when the recording paper runs out or the unit cannot receive because of any trouble.
085~086
Not Used
087 Darker Level 0 = Lightest Contrast~15 = Darkest Contrast
Selects the contrast level.0← →15Lightest← →Darkest
088 Normal Level089 Lighter Level
090~ 091
Not Used
092 Smoothing 1 = Off2 = On
Selects whether the smoothing function is available.
093 ~ 094
Not Used
095 Reduction Ratio (70-100) Selects Print Reduction Ratio(%).096 ~ 101
Not Used
102 Book Top Feed -30~+30
Adjustment of original registration detection timing.
103 Book End Feed -9~0
Adjustment of trail edge void.
104~109
Not Used
110 MAC Address Indicates the MAC Address.111 Not Used112 Insert EMAIL TXT 1 = Off
2 = OnSelects whether the Text Template (email message) is programmable and added on all email sent in the message body above the top line of text. (Up to 40 characters Programmed in the User Parameters.)Note:
After enabling this feature, aside from entering the text in the User Parameters, it also has to be activated in each Auto Dial Number before it will take effect. It does not work for Direct Dialed Numbers.
113~114
Not Used
115 Time Zone 1 = Scroll2 = Direct
Selects the setting method for Time Zone.Scroll : Allows using "Scroll Keys" to scroll
through the Time Zone Table.Direct : Allows you to input the Time Zone
directly, (*) key to be used as a switch between +/-.
116 Overwrite Warning
1 = Yes2 = No
Selects whether the Overwrite Warning is included on the Internet FAX Result Receipt when programming the Auto Dialer via email.
Function Parameter TableNo. Parameter Selections Function
83JUN 2004Ver. 2.0
![Page 84: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/84.jpg)
UF-9000
DP-180/190Note 1: Continuous Polling (Station Mode)This feature allows you to store or add documents into a polled file in memory.
To enable the Continuous Polling feature set Function Parameter No. 003 to "2:Station". The last Program Key will be assigned with the “Store 4 Poll” Key name automatically and cannot be changed.
To prepare the document(s) to be polled, simply place the document(s) on the ADF or Platen and then press the Program Key to store or add the document(s) into a polled file.
(Note: If a regular polled file is stored in memory, the Program Key for Continuous Polling will not be accepted.)
Note 2: Function Parameter No. 070 (Line Error)-Transmit condition of RTP/PIP or RTN/PIN
Note 3: Function Parameter No. 071 (Total Error)-Transmit condition of RTP/PIP or RTN/PIN
Note 4: The default setting of parameters depends on the country’s specifications or regulations. Print the Function Parameter List to confirm the default settings.
117~121
Not Used
122 LDAP 1 = Off2 = On
When LDAP is used, specialized characters may be displayed as different characters.
123 ~ 199
Not Used
SignalSetting
1:128 2:256 3:512 4:1024 5:2048 6:OffMCF/PIP 0-31 0-63 0-127 0-255 0-511 AlwaysRTP/PIP 32-63 64-127 128-255 256-511 512-1023 -RTN/PIN 64-127 128-255 256-511 512-1023 1024-2047 -
SignalSetting
1:5% 2:10% 3:15% 4:20%MCF/PIP 0-2 0-4 0-7 0-9RTP/PIP 3-4 5-9 8-14 10-19RTN/PIN 5- 10- 15- 20-
Function Parameter TableNo. Parameter Selections Function
84JUN 2004Ver. 2.0
![Page 85: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/85.jpg)
UF-9000
DP-180/1904.2.4. Fax Service Mode 3 (Printout of Lists, Reports and Test Results) From this Service Mode you can print the Function Parameter List, Page Memory Test, Printer Report, All Document File, Protocol Trace and the Toner Order Form.
4.2.4.1. Function Parameter ListA list of all Function Parameters can be printed by the following procedure.
Press the “V”, ”/\” arrow keys to select the "3: Print Report/List" on the display.↓
Press the “SET” key.↓
Press the “SET” key to select the "1:Function Parameter List".↓
Press the “STOP” key twice to exit the service mode.
85JUN 2004Ver. 2.0
![Page 86: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/86.jpg)
UF-9000
DP-180/190Note:1. The contents of the Function Parameter List may vary depending on the country’s regulations.2. “ * ” mark will be shown on the left side of number when setting was changed from default.
Function Parameter List (Sample)
************* -FUNCTION PARAMETER- ************* DATE MMM-dd-yyyy ***** TIME 12:07 ***P.01
-PANASONIC -
Note: The power must be reset for the new parameter settings to take effect.
***** ******************* -PANASONIC - ****** -12345678901234567890- *********
000 Mon/Tel Dial:[Monitor] Monitor 050 Ring Det Mode:[Normal] Normal001 Alarm Status:[Timer] Timer 051 ----------002 Stop Comm. JRNL:[On] On 052 Pulse Rate:[10pps] 10pps003 Continuous Polling:[Off] Off 053 ----------004 Numeric ID Set:[On] On 054 ----------005 Destination Code:[999] 999 055 Busy Tone Check:[On] On006 ID Display:[Chara] Chara 056 ----------007 JRNL Column:[Station] Station 057 ----------008 Monitor:[Off] Off 058 Comm.JRNL +Image:[On] On009 DC Loop:[Off] Off 059 Conf.RCV Report:[On] On
010 TX Level:[-11dBm] -11dBm 060 Version: UF-9000 AAV......011 RX Level:[-43dBm] -43dBm 061 TX/RX/PRT/CPY: 000080/000168/000003/000000012 DTMF Level:[-5dBm] -5dBm 062 Print Counter:[Off] Off013 G3 RX EQL:[0dB] 0dB 063 ----------014 G3 TX EQL:[0dB] 0dB 064 ----------015 --------- 065 ----------016 --------- 066 ----------017 TX Start:[14400bps] 14400bps 067 ----------018 RX Start:[14400bps] 14400bps 068 NYSE Fax Forward:[Off] Off019 ITU-T V.34:[On] On 069 NYSE Local Print:[inc] inc
020 ITU-T ECM:[On] On 070 Line Error:[128] 128021 EP Tone:[Off] Off 071 Total Error:[10] 10022 Sig. Interval:[500ms] 500ms 072 Conti. Error:[Off] Off023 TCF Check:[Normal] Normal 073 Error Detect:[Rate] Rate 024 CED Freq.:[2100Hz] 2100Hz 074 RTN Receive:[Discon] Discon025 Comm. Start-Up:[1'st] 1'st 075 Coding:[JBIG] JBIG026 Non-Standard:[On] On 076 Batch TX:[On] On027 Short Protocol B:[On] On 077 RX JAM Length:[2 m] 2 m028 Short Protocol D:[On] On 078 ----------029 Remote Diag.:[On] On 079 ----------
030 CED & 300bps:[75ms] 75ms 080 Doc Top Feed:[0] 0031 RTC=EQL x 12:[Off] Off 081 Doc End Feed:[0] 0032 V34TX Start:[33600bps] 33600bps 082 JAM Length:[2 m] 2 m033 V34RX Start:[33600bps] 33600bps 083 ----------034 V34 TX SR:[3429sr] 3429sr 084 Line As Nopaper:[Ring] Ring035 V34 RX SR:[3429sr] 3429sr 085 ----------036 --------- 086 ----------037 Protocol Display:[Off] Off 087 Darker Level:[2] 2038 --------- 088 Normal Level:[8] 8039 Flash Time:[500ms] 500ms 089 Lighter Level:[14] 14
040 --------- 090 ----------041 Pause Time:[3sec] 3sec 091 ----------042 --------- 092 Smoothing:[On] On043 Redial Interval:[3min] 3min 093 ----------044 Redial Count:[5] 5 094 ----------045 Ring Det. Count:[2] 2 095 Reduction Ratio:[100%] 100%046 On-Hook Time:[5sec] 5sec 096 ----------047 Response Wait:[5sec] 55sec 097 ----------048 --------- 098 ----------049 --------- 099 ----------
86JUN 2004Ver. 2.0
![Page 87: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/87.jpg)
UF-9000
DP-180/190Note:1. The contents of the Function Parameter List may vary depending on the country’s regulations.2. “ * ” mark will be shown on the left side of number when setting was changed from default.
Function Parameter List (Sample)
************* -FUNCTION PARAMETER- ************* DATE MMM-dd-yyyy ***** TIME 12:07 ***P.02
-PANASONIC -
***** ****************** -PANASONIC - ****** -12345678901234567890- ***********
100 ---------- 150 ----------101 ---------- 151 ----------102 Book Top Feed:[0] 0 152 ----------103 Book End Feed:[0] 0 153 ----------104 ---------- 154 ----------105 ---------- 155 ----------106 ---------- 156 ----------107 ---------- 157 ----------108 ---------- 158 ----------109 ---------- 159 ----------
110 MAC Address: 080023000177 160 ----------111 ---------- 161 ----------112 Insert EMAIL TXT:[Off] Off 162 ----------113 ---------- 163 ----------114 Symbol set:[Std] Std 164 ----------115 Time Zone:[Direct] Direct 165 ----------116 Overwrite Warning:[Yes] Yes 166 ----------117 ---------- 167 ----------118 ---------- 168 ----------119 ---------- 169 ----------
120 ---------- 170 ----------121 ---------- 171 ----------122 LDAP:[On] On 172 ----------123 ---------- 173 ---------- 124 ---------- 174 ----------125 ---------- 175 ----------126 ---------- 176 ----------127 ---------- 177 ----------128 ---------- 178 ----------129 ---------- 179 ----------
130 ---------- 180 ----------131 ---------- 181 ----------132 ---------- 182 ----------133 ---------- 183 ----------134 ---------- 184 ----------135 ---------- 185 ----------136 ---------- 186 ----------137 ---------- 187 ----------138 ---------- 188 ----------139 ---------- 189 ----------
140 ---------- 190 ----------141 ---------- 191 ----------142 ---------- 192 ----------143 ---------- 193 ----------144 ---------- 194 ----------145 ---------- 195 ----------146 ---------- 196 ----------147 ---------- 197 ----------148 ---------- 198 ----------149 ---------- 199 ----------
Note: The power must be reset for the new parameter settings to take effect.
87JUN 2004Ver. 2.0
![Page 88: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/88.jpg)
UF-9000
DP-180/1904.2.4.2. Page Memory TestA test pattern prints out for checking the page memory and printer mechanism using the following procedure.
Press the “V”, ”/\” arrow keys to select the "3: Print Report/List" on the display.↓
Press the “SET” key.↓
Press the “V”, ”/\” arrow keys to select the "3: Page Memory Test".↓
Press the “SET” key.↓
Press the “STOP” key twice to exit the service mode.
SC : TX/RX/PRT/CPY : 000123/000456/000789/000666SC BOOT : MEMORY SIZE : (2 MB)PNL : MAC ADDRESS : 08002300E078PRINTER : SHIPMENT SETSPC(SCANNER) :FAX MODEM :SC2 :
************* TEST PATTERN PRINT **************** DATE MMM-dd-yyyy ***** TIME 12:07 ***P.01
-PANASONIC -
***** ****************** -PANASONIC - ****** -12345678901234567890- ***********
88JUN 2004Ver. 2.0
![Page 89: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/89.jpg)
UF-9000
DP-180/1904.2.4.3. Printer ReportAll printer errors are logged on the Printer Report which can be printed by the following procedure.
Press the “V”, ”/\” arrow keys to select the "3: Print Report/List" on the display.↓
Press the “SET” key.↓
Press the “V”, ”/\” arrow keys to select the "4: Printer Report".↓
Press the “SET” key.↓
Press the “STOP” key twice to exit the service mode.
**************-PRINTER REPORT-********************* DATE MMM-dd-yyyy ***** TIME 19:02********
LAST PRINT ERROR : MMM-dd-yyyy 15:38 J00 00-00000016
SERIAL NUMBER : CUSTOMER ID : 1234567890123456
PRINTER :
TRANSMIT COUNTER : 000475 RECEIVE COUNTER : 000398 COPY COUNTER : 000083 PRINT COUNTER : 000016
01.MMM-dd-yyyy 15:38 J00 00-00000016 02.MMM-dd-yyyy 10:48 J02 00-00000016
SC : PNL : SPC (SCANNER) :
-PANASONIC -
***** *******************-PANAFAX -*******-12345678901234567890-**************
FIRMWARE VERSION
NO.DATE & TIME ERROR CODE RRROR COUNT NO.DATE & TIME ERROR CODE RRROR COUNT --------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------
|
||
89JUN 2004Ver. 2.0
![Page 90: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/90.jpg)
UF-9000
DP-180/1904.2.4.4. All Document FilesPrint the document files from the Flash Memory.
Press the “V”, ”/\” arrow keys to select the "3: Print Report/List" on the display.↓
Press the “SET” key.↓
Press the “V”, ”/\” arrow keys to select the "5: All Document Files".↓
Press the “SET” key.↓
Press the “STOP” key twice to exit the service mode.
90JUN 2004Ver. 2.0
![Page 91: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/91.jpg)
UF-9000
DP-180/1904.2.4.5. Protocol TracePrint a Protocol Trace Report for the previous communication.
Press the “V”, ”/\” arrow keys to select the "3: Print Report/List" on the display.↓
Press the “SET” key to select the "1:Function Parameter List".↓
Press the “V”, ”/\” arrow keys select the "6: Protocol Trace".↓
Press the “SET” key.↓
Press the “STOP” key twice to exit the service mode.
*************** PROTOCOL LOG. REPORT ****************** DATE MMM-dd-yyyy ***** TIME 16:56 *******
STATUS : OK MODE : ECM-TX (STANDARD) SPEED : 9600bps 0MS/L REMOTE CAPA. : DIS 00 CE B9 C4 80 12 LOCAL CAPA. : TSI 2B 20 20 20 38 37 2B 2B 2B 2B 39 38 36 36 35 34 37 38 38 30 DCS 00 C6 F8 44
REMOTE : NSF CSI DIS CFR COMMAND LOG.
LOCAL : TSI DCS PIX PPS-EOP
REMOTE : MCF LOCAL : DCN
-PANASONIC -
****************************-PANASONIC -*************-12345678901234567890-***************
------------------------------------------------------------------
91JUN 2004Ver. 2.0
![Page 92: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/92.jpg)
UF-9000
DP-180/1904.2.4.6. Toner Order FormThe Toner Order Form can be printed out manually by the following procedure.
Press the “V”, ”/\” arrow keys to select the "3: Print Report/List" on the display.↓
Press the “SET” key to select the "1:Function Parameter List".↓
Press the “V”, ”/\” arrow keys to select the "7: Toner Order Form".↓
Press the “SET” key.↓
Press the “STOP” key twice to exit the service mode.
92JUN 2004Ver. 2.0
![Page 93: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/93.jpg)
UF-9000
DP-180/190Explanation of Contents
(1) Low Toner Message (Fixed) “The toner supply in your machine is running low”(2) Dealer Name Up to 25 digits(3) Toner Order Tel # Up to 36 digits(4) Toner Order Fax # Up to 36 digits(5) Customer ID Up to 16 characters (User Identification Code)(6) Toner Cartridge No. Refer to the Supply list
************************************* > TONER CARTRIDGE ORDER FORM < *************************************
**** The toner supply in your machine is running low **** (1)
To order a replacement Cartridge from your Authorized Dealer
Panasonic Corp. (2)
by Phone: 1 201 111 5555 (3)by Fax: 1 201 111 4444 (4)
Thank you for your order.
Customer Name and Address=========================
Ship to: Bill to:
Attention: Attention:
Phone No.: Phone No.:
Customer ID: ABC COMPANY (5) P.O. No.(if required):
Toner Cartridge No.: (6) Serial No.:
Quantity Required:
/ /Print your name and title Signature & Date
93JUN 2004Ver. 2.0
![Page 94: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/94.jpg)
UF-9000
DP-180/1904.2.5. Fax Service Mode 4 (Modem Test)4.2.5.1. Binary SignalThis Service Mode is used to check the binary signal output. Signals can be output to the line using the following procedure.
Press the “V”, ”/\” arrow keys to select the "4: MODEM Test" on the display.↓
Press the “SET” key to select the "1: Signal Test".↓
Press the “SET” key.↓
Press the desired number. ↓
Press the “SET” key.↓
Press the “STOP” key twice to exit the service mode.
Binary Signal Table
Number Signals1 V21 300bps2 V27ter 2400bps3 V27ter 4800bps4 V29 7200bps5 V29 9600bps6 V17 TC7200bps7 V17 TC9600bps8 V17 12000bps9 V17 14400bps
94JUN 2004Ver. 2.0
![Page 95: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/95.jpg)
UF-9000
DP-180/1904.2.5.2. Tonal SignalThis Service Mode is used to check the tonal signal output. Signals can be output to the line using the following procedure.
Press the “V”, ”/\” arrow keys to select the "4: MODEM Test" on the display.↓
Press the “SET” key to select the "2: Tonal Testl".↓
Press the “SET” key.↓
Press the desired number and press the "START" key.↓
Press the “STOP” key twice to exit the service mode.
Tonal Signal Table
Number Signals1 462 Hz2 1080 Hz3 1100 Hz4 1300 Hz5 1650 Hz6 1850 Hz7 2100 Hz
95JUN 2004Ver. 2.0
![Page 96: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/96.jpg)
UF-9000
DP-180/1904.2.5.3. DTMF SignalThis Service Mode is used to check the DTMF (Dual Tone Multi Frequency) signal output.The DTMF signal can be generated using the following procedure.
• DTMF Single TonePress the “V”, ”/\” arrow keys to select the "4: MODEM Test" on the display.
↓Press the “SET” key to select the "3: DTMF Test".
↓Press the “SET” key.
↓Press the “V”, ”/\” arrow keys to select the "1. Single".
↓Press the desired number and press the "START" key.
↓Press the “STOP” key twice to exit the service mode.
• DTMF Dual TonePress the “V”, ”/\” arrow keys to select the "4: MODEM Test" on the display.
↓Press the “SET” key to select the "3: DTMF Test".
↓Press the “SET” key.
↓Press the “V”, ”/\” arrow keys to select the "2. Dual".
↓Press the desired number and press the "START" key.
↓Press the “STOP” key twice to exit the service mode.
DTMF Single Tone Table DTMF Dual Tone Table
Number DTMF Signal Tones Number DTMF Dual Tones1 697 Hz 0 941 Hz + 1336 Hz2 770 Hz 1 697 Hz + 1209 Hz3 852 Hz 2 697 Hz + 1336 Hz4 941 Hz 3 697 Hz + 1477 Hz5 1209 Hz 4 770 Hz + 1209 Hz6 1336 Hz 5 770 Hz + 1336 Hz7 1477 Hz 6 770 Hz + 1477 Hz8 1633 Hz 7 852 Hz + 1209 Hz
8 852 Hz + 1336 Hz9 852 Hz + 1477 Hz* 941 Hz + 1209 Hz# 941 Hz + 1477 Hz
96JUN 2004Ver. 2.0
![Page 97: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/97.jpg)
UF-9000
DP-180/1904.2.5.4. Binary Signal (V.34)This Service Mode is used to check the binary signal output. Signals can be output to the line using the following procedure. (V.34)
Press the “V”, ”/\” arrow keys to select the "4: MODEM Test" on the display.↓
Press the “SET” key to select the "4: V34 MODEM".↓
Press the “SET” key.↓
Press the desired number and press the "START" key.↓
Press the “STOP” key twice to exit the service mode.
Binary Signal Table
Number Signals Number Signals Number Signals01 V34 2400 sr 2400 bps 22 V34 3000 sr 9600 bps 43 V34 3429 sr 4800 bps02 V34 2400 sr 4800 bps 23 V34 3000 sr 12000 bps 44 V34 3429 sr 7200 bps03 V34 2400 sr 7200 bps 24 V34 3000 sr 14400 bps 45 V34 3429 sr 9600 bps04 V34 2400 sr 9600 bps 25 V34 3000 sr 16800 bps 46 V34 3429 sr 12000 bps05 V34 2400 sr 12000 bps 26 V34 3000 sr 19200 bps 47 V34 3000 sr 19200 bps06 V34 2400 sr 14400 bps 27 V34 3000 sr 21600 bps 48 V34 3429 sr 16800 bps07 V34 2400 sr 16800 bps 28 V34 3000 sr 24000 bps 49 V34 3429 sr 19200 bps08 V34 2400 sr 19200 bps 29 V34 3000 sr 26400 bps 50 V34 3429 sr 21600 bps09 V34 2400 sr 21600 bps 30 V34 3000 sr 28800 bps 51 V34 3429 sr 24000 bps10 V34 2800 sr 4800 bps 31 V34 3200 sr 4800 bps 52 V34 3429 sr 26400 bps11 V34 2800 sr 7200 bps 32 V34 3200 sr 7200 bps 53 V34 3429 sr 28800 bps12 V34 2800 sr 9600 bps 33 V34 3200 sr 9600 bps 54 V34 3429 sr 31200 bps13 V34 2800 sr 12000 bps 34 V34 3200 sr 12000 bps 55 V34 3429 sr 33600 bps14 V34 2800 sr 14400 bps 35 V34 3200 sr 14400 bps 56 ANSam15 V34 2800 sr 16800 bps 36 V34 3200 sr 16800 bps 57 CM16 V34 2800 sr 19200 bps 37 V34 3200 sr 19200 bps 58 JM17 V34 2800 sr 21600 bps 38 V34 3200 sr 21600 bps 59 INFO0c & TONEB18 V34 2800 sr 24000 bps 39 V34 3200 sr 24000 bps 60 INFO0c & TONEA19 V34 2800 sr 26400 bps 40 V34 3200 sr 26400 bps 61 PPh & AC & ALT20 V34 3000 sr 4800 bps 41 V34 3200 sr 28800 bps21 V34 3000 sr 7200 bps 42 V34 3200 sr 31200 bps
97JUN 2004Ver. 2.0
![Page 98: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/98.jpg)
UF-9000
DP-180/1904.2.6. Fax Service Mode 6 (RAM Initialization)Initializes RAM and restores the Function Parameters to their default values.Note:
This operation should be performed when the unit is first installed.
Press the “V”, ”/\” arrow keys to select the "6: RAM initialize" on the display.↓
Press the “SET” key to select the desired Mode number.↓
Press the "SET" key to initialize RAM.↓
Press the “STOP” key twice to exit the service mode.
RAM Initialization Table
No. Initialize Mode Description01 PARAMETER INITIALIZE Restores the Fax and Function Parameters to default
values.Note: Turn the Power Switch to the OFF and back to the ON position to enable the parameter settings.
02 JOURNAL CLEAR Clears the Journal contents.03 AUTO DIAL CLEAR Clears the One-touch, ABBR Numbers and Phone Books.04 PROGRAM DIAL CLEAR Clears the Program keys.05 LOGO/ID/PSWD CLEAR Clears the Logo, ID, Polling Password.06 LBP ERROR LOG CLEAR Clears the Printer Error Log.07 SHIPMENT SET Deletes all setting information, except parameter number
80 and 81, then set default values.08 FLASH MEMORY CLEAR Deletes all information in the Flash Memory.09 ALL JOB CLEAR Clears all Jobs stored in Flash Memory.
98JUN 2004Ver. 2.0
![Page 99: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/99.jpg)
UF-9000
DP-180/1904.2.7. FAX Service Mode 8 (Check & Call)4.2.7.1. OverviewThis feature enables the Authorized Servicing Dealers to manage and improve the machine maintenance to their customers by alerting them of equipment problems. It also can be used as a Supply Sales Tool by alerting the Dealer that the unit is running Low on Toner. The function overview is as follows:
1. The machine’s printer error information is stored in the Printer Report.2. The printer report can be manually printed when required.3. When printer errors occurs, the unit can automatically transmit the Service Alert Report to the pre-
registered telephone number or email address.4. When the unit detects Low Toner or PM counter reached the maintenance timing, it can automatically
transmit the Maintenance Alert Report to the pre-registered telephone number or email address.
Press the “V”, ”/\” arrow keys to select the "08 Check & Call" on the display.↓
Press the “SET” key to select the desired code number.(i.e. 01 Service Alert Fax #, input the telephone No. or for an email address, press the "FAX/EMAIL" Mode key and input the email address.)
↓Press the "SET" key.
↓Press the “STOP” key twice to exit the service mode.
4.2.7.2. Printer Reports• Conditions under which a report can be printed or transmitted1. Manual print
The Printer Report can be printed by Service Mode 3. (See Sect. 4.2.4.3.)2. Automatic transmission/printout
a. Service Alert ReportWhen the unit detects an Emergency Printer Error, the unit will immediately transmit the Service Alert Report to the pre-registered telephone number or email address. However, the unit will not transmit the Service Alert Report if it finds the same error within the same date in the error log.
b. Maintenance Alert ReportWhen the unit detects Low Toner, the unit can automatically transmit the Maintenance Alert Report to the pre-registered telephone number or email address. Refer to the Error Code Table.
c. Toner Order FormWhen the unit detects Low Toner, the unit can automatically print the Toner Order Form with the pre-registered order information.
d. Call Counter ReportWhen the printer counter reaches the pre-set number, the unit can automatically transmit the Call Counter Report to the pre-registered telephone number or email address.
Note:The Service and Maintenance Alert Reports are managed in the same manner as the normal memory transmission (Retry, Incomplete, File List, Display while it is transmitting, Journal).
99JUN 2004Ver. 2.0
![Page 100: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/100.jpg)
UF-9000
DP-180/190Note:TX (Transmission) Report: S = Service Alert Report, M = Maintenance Alert Report
Error Code Log Tx
Report Remarks
Ex-xx O S Refer to the Mechanical Error Code (E Code) Table. (Sect. 3.1.3.)E13 Out of Toner.Jxx Refer to the Jam Error Code (J Code) Table. (Sect. 3.1.2.)Uxx Refer to the User Error Code (U Code) Table. (Sect. 3.1.1.)U13 M Low Toner.
100JUN 2004Ver. 2.0
![Page 101: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/101.jpg)
UF-9000
DP-180/1904.2.7.3. SERVICE ALERT REPORT FORMAT
Explanation of Contents
(1) Customer ID(2) Firmware Version(3) Counter Information(4) Print Error Last 30 records (Latest on top)
*************************************************** DATE MMM-dd-yyyy ***** TIME 03:47 ********
**************************** > SERVICE ALERT REPORT < ****************************
(1)
(2)
CUSTOMER ID : ABC COMPANY
LAST PRINT ERROR : MMM-dd-yyyy 20:07 E04-01 00-00000013
FIRMWARE VERSION
(3)
(4)
COUNTER INFORMATION: CURRENT PM CYCLE CURRENT
F7-02 Total Count : 13 240000 2-Sided Count : 0PM COUNT : 13 (------) A4/LETTER Count : 3Scanner PM Count : 9 (------) A4-R/LETTER-R Count : 10ADF Count : 1 ------ OPC Drum Count : 13 ------ Process Unit Count : 13 (------)ADF PM Count : 1 F7-04 ADF Count : 1
ADF Read Count : 1Developer Count : 13 Scanner Count : 9Corona Cleaning Count : 13 Scanner Read Count : 9Avg. Print/Drum Rise Up : 1.00Total OPC Rotation Time : 0.03 F7-05 Copy Print Count : 3Avg. Sec/Drum Rise Up : 0.01 Copy Scan Count : 4
F7-03 Sheet Bypass Count : 0 F7-06 PC Print Count : 01st Paper Tray Count : 3 PC Scan Count : 62nd Paper Tray Count : 10
F7-07 FAX Transmit Count : 0 FAX Receive Count : 0
FAX Print Count : 0
PRINT ERROR:
NO. DATE & TIME ERROR CODE ERROR COUNT | NO. DATE & TIME ERROR CODE ERROR COUNT-------------------------------------------------------------------------------------------01 MMM-dd-yyyy 20:07 E04-01 00-00000013 |02 MMM-dd-yyyy 20:04 E04-01 00-00000013 | | | | | | | | | | | |
| -------------------------------------------------------------------------------------------
-LOGO PANASONIC -
***** *********************** -CHARACTER ID - ***** -31415926535897932384-*********
SC : SPC :
101JUN 2004Ver. 2.0
![Page 102: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/102.jpg)
UF-9000
DP-180/1904.2.7.4. MAINTENANCE ALERT REPORT FORMAT
Explanation of Contents
(1) Low Toner Message (Fixed) “MACHINE IS RUNNING OUT OF TONER”(2) Customer ID Up to 16 characters (User Identification Code)(3) Firmware Version(4) Transmission / Reception / Copy / Print Counters
*************************************************** DATE MMM-dd-yyyy ***** TIME 12:00 ********
**************************** > MAINTENANCE ALERT REPORT < ****************************
LAST PRINT ERROR : MACHINE IS RUNNING OUT OF TONER (1)
CUSTOMER ID : ABC COMPANY (2)
FIRMWARE VERSION (3)
(4) TRANSMIT COUNTER : 000244 RECEIVE COUNTER : 000082 COPY COUNTER : 000000 PRINT COUNTER : 000000
-LOGO PANASONIC -
************************************ -CHARACTER ID - ***** -31415926535897932384-***********
SC : SPC :
NO.DATE & TIME ERROR CODE ERROR COUNT NO.DATE & TIME ERROR CODE ERROR COUNT---------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------
102JUN 2004Ver. 2.0
![Page 103: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/103.jpg)
UF-9000
DP-180/1904.2.7.5. Toner Order Form
Explanation of Contents
(1) Low Toner Message (Fixed) “The toner supply in your machine is running low”(2) Dealer Name Up to 25 digits(3) Toner Order Tel # Up to 36 digits(4) Toner Order Fax # Up to 36 digits(5) Customer ID Up to 16 characters (User Identification Code)(6) Toner Cartridge No. Refer to the Supply list
************************************* > TONER CARTRIDGE ORDER FORM < *************************************
**** The toner supply in your machine is running low **** (1)
To order a replacement Cartridge from your Authorized Dealer
Panasonic Corp. (2)
by Phone: 1 201 111 5555 (3)by Fax: 1 201 111 4444 (4)
Thank you for your order.
Customer Name and Address=========================
Ship to: Bill to:
Attention: Attention:
Phone No.: Phone No.:
Customer ID: ABC COMPANY (5) P.O. No.(if required):
Toner Cartridge No.: (6) Serial No.:
Quantity Required:
/ /Print your name and title Signature & Date
103JUN 2004Ver. 2.0
![Page 104: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/104.jpg)
UF-9000
DP-180/1904.2.7.6. CALL COUNTER REPORT
Explanation of Contents
(1) Customer ID(2) Firmware Version(3) Counter Information(4) Call Counter Pre-Set Value
*************************************************** DATE MMM-dd-yyyy ***** TIME 03:47 ********
***************************************************************** > SCHEDULED REPORT - CALL COUNTER HAS REACHED PRE-SET VALUE < *****************************************************************
(1)
(2)
CUSTOMER ID : ABC COMPANY
LAST PRINT ERROR : MMM-dd-yyyy 20:07 E04-01 00-00000013
FIRMWARE VERSION
(3)
(4)
COUNTER INFORMATION: CURRENT PM CYCLE CURRENT
PM COUNT : 13 (------) A4/LETTER Count : 3Scanner PM Count : 9 (------) A4-R/LETTER-R Count : 10ADF Count : 1 ------ A3/LEDGER Count : 0OPC Drum Count : 13 ------ B4/LEGAL Count : 0Process Unit Count : 13 (------)ADF PM Count : 1 F7-04 ADF Count : 1Fuser Web Count : 240986 ADF Read Count : 1Developer Count : 13 Scanner Count : 9Corona Cleaning Count : 13 Scanner Read Count : 9Avg. Print/Drum Rise Up : 1.00Total OPC Rotation Time : 0.03 F7-05 Copy Print Count : 3Avg. Sec/Drum Rise Up : 0.01 Copy Scan Count : 4
F7-03 Sheet Bypass Count : 0 F7-06 PC Print Count : 01st Paper Tray Count : 3 PC Scan Count : 62nd Paper Tray Count : 103rd Paper Tray Count : 0 F7-07 FAX Transmit Count : 04th Paper Tray Count : 0 FAX Receive Count : 0
FAX Print Count : 0
Call Counter Pre-Set Value : 14000
PRINT ERROR:
NO. DATE & TIME ERROR CODE ERROR COUNT | NO. DATE & TIME ERROR CODE ERROR COUNT-------------------------------------------------------------------------------------------01 MMM-dd-yyyy 20:07 E04-01 00-00000013 |02 MMM-dd-yyyy 20:04 E04-01 00-00000013 | | | | | | | | | | |
| -------------------------------------------------------------------------------------------
-LOGO PANASONIC -
***** *********************** -CHARACTER ID - ***** -31415926535897932384-*********
SC : SPC :
104JUN 2004Ver. 2.0
![Page 105: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/105.jpg)
UF-9000
DP-180/1904.2.8. Service Mode 9 (System Maintenance)4.2.8.1. OverviewThis Service Mode is used to maintain the machine. Use the following procedure for System Maintenance.
Press the “V”, ”/\” arrow keys to select the "9: System Maintenance" on the display.↓
Press the “SET” key to select the "8: Send RCV’D File". The display changes to the Fax Mode.↓
Select the desired Fax number.↓
Press "START" to send the Fax. After the transmission, the machine returns to the Stand-by Mode.
Note:If there is NO File in the machine, this operation will not function.Press the “STOP” key twice to exit the service mode.
System Maintenance Table
No. Maintenance Mode Description08 Send RCV'D File Transfers documents from memory to another fax machine
during a fatal printer error.
105JUN 2004Ver. 2.0
![Page 106: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/106.jpg)
UF-9000
DP-180/1905 Exploded View & Parts ListNote:
1. Panasonic Document Imaging Company and other Panasonic Sales Companies reserve the right to change any information enclosed herein without prior notification. (This includes, but is not limited to, parts pricing, availability, and text)
2. Electrical parts supplied may include previously used components.3. Important Safety Notice
Components identified by a mark, have special characteristics important for safety. When replacing any of these components, use only manufacturerís specified parts.
4. In Remarks column, "PM" indicates “Preventive Maintenance Part".5. In Remarks column, "RTL" indicates that the Retention Time is limited for this item. After the
discontinuation of this assembly in production, the item will continue to be available for a specific period of time. The retention period of availability is dependant on the type of assembly, and in accordance with the laws governing part and product retention. After the end of this period, the assembly will no longer be available.
6. This “Unit" which includes other itemized parts is provided as “Limited Availability" for your convenience, and will only be offered for up to 3 years after the production of the unit ceases. However, the individual contents of the assembly will be available for the standard period.
7. Supplier "OAPD" is the supplier code 00029151.8. For Screw identification and Part Number, please refer to the last section of this chapter.
106JUN 2004Ver. 2.0
![Page 107: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/107.jpg)
UF-9000
DP-180/1905.1. Destination Codes
5.1.1. Destination Codes for Fax Option
Code Destination Code DestinationAG Germany EP Spain; Greece; PortugalAL Australia; New Zealand ER Denmark; Norway; Sweden; Finland;
TurkeyAM Switzerland
AU USA, Canada, Mexico; Panama (120 VAC Power Supply)
ES Saudi Arabia; U.A.E.
YA Panama; Chile(220-240 VAC Power Supply)AV France
EB England; Singapore; Malaysia; Hong Kong YC South Africa; Egypt; Russia;
Hungary; Czech; PolandEE Italy YV ChinaEH Belgium; Netherlands
Code Destination Code DestinationAA Austria YA Panama; Chile
(220-240 VAC Power Supply)AB EnglandAE Taiwan YC Universal 220-240 VAC Power
Supply VersionAG GermanyAH Netherlands YG GreeceAJ Spain YK South KoreaAK Hong Kong SAR, PRC YM MalaysiaAL Australia YP Poland; Hungary; CzechAM Switzerland YR RussiaAP Portugal YS Saudi ArabiaAR Belgium YV ChinaAT Turkey YW South AfricaAU USA; Puerto Rico; Canada YX SingaporeAV France YY Mexico; Panama
(120 VAC Power Supply)AW New ZealandEE ItalyEN Denmark; Finland; Norway; Sweden
107JUN 2004Ver. 2.0
![Page 108: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/108.jpg)
UF-9000
DP-180/1905.2. Control Panel Unit
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
101 PJKEB0115Z Base, Panel All
102 PJKKB0001Z Holder, Battery All
103
PJGPB0011Z
Cover, Panel
For UF-9000/DP-190
AU
For DP-180
Except AG, AV, YV
PJGPB0011Y AG
PJGPB0011X AV
PJGPB0011W YV
104 DZKB000796 Key, Start All
105 DZKB000762 Key, Stop All
106 DZKB000641 Key, Reset All
107 DZKB000760 Key, Function All
108 DZKB000922 Key, A All
109 DZKB000640 Key, B All
110 DZKB000862 Key, Copy All
111 DZKB000858 Key, Scan/File All
112 DZKB000637 Key, Print All
113 DZKB000803 Key, Touch3 All
114 PJBCB0017Z Key, Fax/Email All
115 PJBCB0022Z Key, Ten All
116 PJBCB0016Z Key, Contrast All
117 PJBCB0018Z Key, Zoom All
118
PJBCB0019Z
Key, 1
For UF-9000 AU
PJBCB0019Y For DP-180/190 Except AV
PJBCB0019X For DP-180 AV
119
PJBCB0020Z
Key, 2
For UF-9000 AU
PJBCB0020Y For DP-180/190 Except AG, AV
PJBCB0020XFor DP-180
AG
PJBCB0020W AV
120 PJBCB0021Z Key, 3 All
121 PJKEB0120Z Lamp, Doing All
122 PJBAB0020Z Holder, LCD All
123 PJHXB0019Z Sheet, Insulated All
124
PJGKB0087Z
LCD Window
For UF-9000 AU
PJGKB0107Y For DP-190 AU
PJGKB0107X
For DP-180
AG
PJGKB0107W AV
PJGKB0107V YV
PJGKB0107ZExcept AU, AG, AV, YV
125
PJGKB0088Z
Sheet, Panel 1
For UF-9000/DP-190
AU
PJGKB0088Y
For DP-180
AG
PJGKB0088X AV
PJGKB0088W YV
PJGKB0088UExcept AU, AG, AV, YV
108JUN 2004Ver. 2.0
![Page 109: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/109.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 1 Control Panel Unit
F10
126
124
125
103
121
F10
1907
1943
1942
115
104
105
106
107
120
117
1909
1941
113
110
112
111
114
F10
F10
127
123
122
1905
129
118
119
1906
1908
116130
108
108
109For DP-180/190only
For DP-180/190
For UF-9000
109
101
V6
102
128
F10
1943
1948
19391940
109JUN 2004Ver. 2.0
![Page 110: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/110.jpg)
UF-9000
DP-180/190Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
126
PJGKB0089Z
Sheet, Panel 2
For UF-9000 AU
PJGKB0089Y For DP-180/190Except AG, AV, YV
PJGKB0089X
For DP-180
AG
PJGKB0089W AV
PJGKB0089V YV
127 DZDA000047 LCD Module All
128 CR2032 Battery All
129 PJHXC0001Z Sheet, Protect All
130 PJBCB0023Z Key, C For DP-180/190 All
1905Depends on Destination
PC Board, PNL1See Sect. 5.18. PC Boards
1906Depends on Destination
PC Board, PNL2See Sect. 5.18. PC Boards
1907 DZEC102980 PC Board, PNL3 RTL, PbF All
1908 DZEC102992 PC Board, PNL4 RTL, PbF All
1909 DZEC102993 PC Board, PNL5 RTL, PbF All
1939 DZFP001561 Harness, PNL1-PNL2_17PIN All
1940 DZFP001562 Harness, PNL1-PNL2_14PIN All
1941 DZFP001563 Harness, PNL1-PNL3_18PIN All
1942 DZFP001564 Harness, PNL1-PNL3_10PIN All
1943 DZFP001548 Harness, PNL2-PNL3_5PIN All
1948 DZFP001574 Harness, Book-PNL All
F10 XTB3+8G Screw All
V6 XTB3+8JFN Screw OAPD All
110JUN 2004Ver. 2.0
![Page 111: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/111.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 1 Control Panel Unit
F10
126
124
125
103
121
F10
1907
1943
1942
115
104
105
106
107
120
117
1909
1941
113
110
112
111
114
F10
F10
127
123
122
1905
129
118
119
1906
1908
116130
108
108
109For DP-180/190only
For DP-180/190
For UF-9000
109
101
V6
102
128
F10
1943
1948
19391940
111JUN 2004Ver. 2.0
![Page 112: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/112.jpg)
UF-9000
DP-180/1905.3. Scanner Unit
Safety Mark
Ref. No. Parts Number Part Name Supplier Remarks Destination
201 81150C008H Switch, Magnetic All
202 92110C001H Shaft, IR All
203 92143D001H Belt All
204 92102C001H Plate, Motor Fix All
205 92123D001H Gear, 60T/P16T All
206 91123D035H Collar All
207 91133D004H Spring, Tension All
208 91102D012H Sheet, Holder All
209 91102D011H Holder, Pulley All
210 91123D034H Pulley, Idle All
211 92123C003H Cover, Hole All
212 92123A001H Frame, IR Base All
213 92125D006H Seal, CCD Harness All
214 92130D002H Sponge All
215 92102C007H Plate, Metal All
216 92102C002H Cover, Main Board All
217 92102C003H Base, Cover All
218 92123C004H Cover, Harness All
219 7UA1810A681B Assembly, Scanner Cover All
221 738902000340 Motor All
222 737430400030 Sensor, Home Detect All
223 92102D005H Spring, Plate All
224 783309000120 E-Ring All
225 92129D010H Seal, Screw All
226 92102D007H Plate, FFC Set All
227 92102D008H Plate, Seal All
228 92102D009H Plate, Core Set All
230 92129D021H Gasket 1 All
231 92129D022H Gasket 2 All
1910 7UA1810AF11A PC Board, SPC PbF All
H8 XTW3+8LFN Screw All
V7 XTW3+8PFN Screw All
112JUN 2004Ver. 2.0
![Page 113: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/113.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 2 Scanner Unit
230 231213
214
226
V7
215
216
217
218
212211
202
204
205
206
203206 224
210
208
207
209
201
219V7 225
H8
V7
H8
V7
Fig. 3
V7
V7
1910
H8
V7
V7
221
V7222
224
223
H8
227
223
V7
228
113JUN 2004Ver. 2.0
![Page 114: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/114.jpg)
UF-9000
DP-180/1905.4. CCD
Safety Mark
Ref. No. Parts Number Part Name Supplier Remarks Destination
3017UA1810A721B
Assembly, CCD ModuleFor UF-9000/DP-190
AU
7UA1810A722B For DP-180 Except AU
303 738903000110 Lamp, Scanning All
305 735109001050 Core All
306 81325D113H Cover, Inverter All
1922 739909000620Cable, CCD (Flat Harness)
All
W8 XTN3+8JFN Screw All
114JUN 2004Ver. 2.0
![Page 115: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/115.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 3 CCD
306
303
W8
W8
301
305
305
1922
115JUN 2004Ver. 2.0
![Page 116: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/116.jpg)
UF-9000
DP-180/1905.5. ADF
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
401 92123A005H Cover, Top ADF All
402 92123A007H Cover, Rear ADF All
403 91134C001H Hinge, ADF All
404 92130D001H Pad, Scanning All
405 91123A004H Base, ADF All
406 91123D006H Level, Sensor All
407 91102D005H Plate, Roll Fix All
408 91123D025H Roller All
409 91102D004H Plate, ADF Roller Fix All
410 92123D004H Gear, 23S All
411 92123D005H Gear, 19S All
412 91123D021H Base, Pickup All
413 91123D022H Arm, Stopper All
414 91127C004H Roller, Pickup PM All
415 91110D003H Shaft, Pickup All
416 81123D150H Gear, 23T All
417 91127C003H Roller, ADF PM All
418 91110D002H Shaft, ADF All
419 92110D001H Shaft, Transfer All
420 91123D024H Shutter, Right All
421 91123D023H Shutter, Left All
422 81123D148H Gear, 12T All
423 92123D003H Gear, 20T All
424 92142D001H Clutch, One Way All
425 91110D007H Pin All
426 81133D040H Spring, Tension All
427 91129D010H Sheet, Trace All
428 737430400020 Sensor, 400mm All
429 92123A006H Guide, Document All
430 92123B001H Guide, Extend Document All
431 92123C002H Guide, Front All
432 92123C001H Guide, Rear All
433 91123D008H Rack, Guide All
434 81123D156H Gear, 24T All
435 91123D005H Cover, Tray All
436 92125D001H Sheet, Tray All
437 92125D007HLabel, Max. Capacity Indicator
All
439 91123D042H Base, Dummy Hinge All
440 91137D002H Screw, Dummy Hinge All
116JUN 2004Ver. 2.0
![Page 117: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/117.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 4 ADF (1/2)
430436432
437
V7
405
427
427
433
429
431
434
433435
V7
404403
425
425V8442
446
402
439
443
414
447
415
411410
418
417
416
413
412
413
449
406428
419
423424
445409
V7
426
408
407
422 420
421
401
V7
1911
H8
V7
441440
444
444
H8
448
117JUN 2004Ver. 2.0
![Page 118: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/118.jpg)
UF-9000
DP-180/190Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
441 92123D011H Cover, Dummy Hinge All
442 7UZFFA02501B ADF Unit All
443 91123D043H Hinge, Upper Dummy All
444 92130D003H Cushion, Stopper All
445 92130D004H Cushion, Pick-up All
446 PJQTB0292Z Label, Color All
447 21070121706 E-Ring All
448
PJQTB0265Z
Label, F
For UF-9000 AU
PJQTB0265Y For DP-180/190Except AG, AV, EE, YV
PJQTB0265X
For DP-180
AG
PJQTB0265W AV
PJQTB0265V EE
PJQTB0265U YV
449 7UA1810A631B Assembly, Pickup All
1911 7UA1810AS11A PC Board, ADF PbF All
H8 XTW3+8LFN Screw All
V7 XTW3+8PFN Screw All
V8 XTW4+16P Screw All
118JUN 2004Ver. 2.0
![Page 119: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/119.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 4 ADF (1/2)
430436432
437
V7
405
427
427
433
429
431
434
433435
V7
404403
425
425V8442
446
402
439
443
414
447
415
411410
418
417
416
413
412
413
449
406428
419
423424
445409
V7
426
408
407
422 420
421
401
V7
1911
H8
V7
441440
444
444
H8
448
119JUN 2004Ver. 2.0
![Page 120: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/120.jpg)
UF-9000
DP-180/190Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
501 92123A004H Base, ADF All
502 92129D002H Sheet, Protect Cover All
503 91127D001H Roll, Exit All
504 91133D001H Spring, Exit Roller All
505 92123D015H Cover, Protect All
506 91102D007H Spring, Roller Pressure All
507 91123D003H Arm, Sensor All
508 91123D001H Roll, Pinch All
509 91100D001H Shaft All
510 91123A003H Cover, Frame All
511 91123A002H Frame, ADF All
512 91192D001H Plate, Motor Attachment All
513 91133D002H Spring, Tension All
514 92123D006H Holder, Pickup Sheet All
515 91134D001H Sheet, Pickup All
516 91127C001H Roller, Feed PM All
517 91102D002H Spring, Ground All
518 91102C004H Plate, Reading All
519 91127C002H Roller, Exit All
520 92123D012H Stud, Gap All
521 91123D012H Gear, 33T All
522 91102C002H Plate, Front Attachment All
523 92123D014H Lib, Fix Plate All
524 91123D053H Hook, Top Cover All
525 91123D002H Knob, Paper Transport All
526 91102B002H Plate, Rear Attachment All
527 91123D013H Gear, 48T All
528 91123D009H Gear, 18/45T All
529 91123D015H Gear, 18/40T All
530 92123D002H Gear, 32/15T All
531 91123D014H Gear, 26T All
532 91133D005H Spring, Reading Plate All
533 91123D010H Gear, 30T All
534 91129D008H Sheet, Guide All
535 81141C001H Magnetic All
536 92129D001H Sheet, White Reference All
537 91142D002H Bushing, D6 All
538 92129D004H Sheet, Gap Limit All
539 91134D002H Brush, Antistatic All
540 737430400010 Sensor, 320mm All
120JUN 2004Ver. 2.0
![Page 121: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/121.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 5 ADF (2/2)
507540
550
502
505
509
V7
V7
506
508
553 554
501
538
536552
534
518
516
522
532
520
537
515
514
539
549
510
547
513
V7
W5
546
551548
503504
525
V9
524 V7
523
519
537
537
P8517
511526
542524
541
512
V9
531
530528
527
521
533
529
V9
535
W1
121JUN 2004Ver. 2.0
![Page 122: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/122.jpg)
UF-9000
DP-180/190Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
541 738902000331 Motor All
542 737428200050 Sensor, Cover All
546 91123D004H Base, Pad All
547 91127D002H Rubber, Separation PM All
548 91129D004H Sheet, Pad All
549 91129D009H Sheet, Pressure All
550 91133D006H Spring, Torsion All
551 81158D013H Rivet, Snap All
552 92129D008H Sheet, Plate All
553DZHT000027
Stamp HeadAU
DZHT000004 Except AU
554 7UA1810A951B Assembly, Stamp All
P8 XTW3+8P Screw All
V7 XTW3+8PFN Screw All
V9 XTW3+6LFN Screw All
W1 XTS3+8J Screw All
W5 XSN2+10FN Screw All
122JUN 2004Ver. 2.0
![Page 123: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/123.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 5 ADF (2/2)
507540
550
502
505
509
V7
V7
506
508
553 554
501
538
536552
534
518
516
522
532
520
537
515
514
539
549
510
547
513
V7
W5
546
551548
503504
525
V9
524 V7
523
519
537
537
P8517
511526
542524
541
512
V9
531
530528
527
521
533
529
V9
535
W1
123JUN 2004Ver. 2.0
![Page 124: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/124.jpg)
UF-9000
DP-180/1905.6. Cover Assembly
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
601
PJKEB0081Z
Cover, Front
For UF-9000 AU
PJKEB0081Y For DP-190 AU
PJKEB0081X For DP-180 Except AU
602 PJHRB0567Z Support, Right Paper All
603 PJHRB0568Z Support, Left Paper All
604 PJHRB0045Z Rack, Guide OAPD All
605 PJHRB0046Z Gear, Paper Guide Pinion OAPD All
606 PJBAB0011Z Hook OAPD All
607 PJYK4P7305MAssembly, Pinch Roller Holder
OAPD All
608 PJDSB0034Z Spring, Pinch Roller OAPD All
609 PJDSB0145Z Spring, Cleaning Roller OAPD All
610 PJDRB0017Z Roller, Pinch OAPD All
611 PJDRB0093Z Roller, Cleaning OAPD All
612 PJYKF2300AU Door, Rear All
613 PJDFB0008Z Shaft, Roller OAPD All
614 PJDSB0112Z Spring OAPD All
615 PJKEB0110Z Cover, Right Side All
616 PJKEB0111Z Cover, Left Side All
617 PJKEB0112Z Cover, Rear All
618 PJKEB0116Z Cover , Right Leg All
619 PJKEB0117Z Cover, Left Leg All
620 PJKEB0118Z Cover, PCB All
621 DZMA003267 Cover, Flash Memory Card All
622 PJQTB0264Z Sheet, Right Cover All
623 PJKEB0113Z Cover, Top All
624 PJKEB0114Z Tray, Sub Paper All
625 PJKEB0130Z Cover, Rear Paper Tray All
626DZDU000025
Handset
Refer to 5.1.1.
Except AK
DZDU000027 AK
627DZJE000738
Cradle, UpperAU
DZMA000260 Except AU
628DZJE000740
Cradle, LowerAU
DZMA000269 Except AU
629 DZFN000060 Cord, Handset All
630DZFN000082
Cord, CradleExcept AK
DZFN000115 AK
124JUN 2004Ver. 2.0
![Page 125: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/125.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 6 Cover Assembly
602
606
T8
604
605
T8
T8
603
601
606T9
T9
T9
V6
635
622
631
W2
T9 610
608611
609610
608
607632 615
618
V6
633
V6
628
19
1946
626
629627
630
616
619
T9634
V6
624
623
V9
606
612
606
V6
625
617
613
610
614
621
620V6
125JUN 2004Ver. 2.0
![Page 126: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/126.jpg)
UF-9000
DP-180/190Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
631 DZDR000014 Speaker All
632 DZNK005395 Label, Laser Caution All
633 PJQTC0003Z Label, Flash Memory All
634 PJMDB0316Z Plate, Cover All
635 FFPTE2650 Label, Energy Star All
1946
DZEC101941
PC Board, SRU Refer to 5.1.1.
AU
DZEC102525 AK
DZEC102526 AT
DZEC102566 YC
DZEC102527 YW
19 XTB3+8J Screw All
T8 XTW26+8S Screw OAPD All
T9 XTW3+8S Screw OAPD All
V6 XTB3+8JFN Screw OAPD All
V9 XTW3+6LFN Screw All
W2 DZZSP29011 Screw All
126JUN 2004Ver. 2.0
![Page 127: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/127.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 6 Cover Assembly
602
606
T8
604
605
T8
T8
603
601
606T9
T9
T9
V6
635
622
631
W2
T9 610
608611
609610
608
607632 615
618
V6
633
V6
628
19
1946
626
629627
630
616
619
T9634
V6
624
623
V9
606
612
606
V6
625
617
613
610
614
621
620V6
127JUN 2004Ver. 2.0
![Page 128: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/128.jpg)
UF-9000
DP-180/1905.7. Right Side Parts
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
701 PJMDB0288Z Cover, SC All
702 PJMDB0287Z Base, SC All
703 PJMDB0286Z Base, Rear PC Board All
704 DZJF000462 Guide, Flash Memory Card All
705 PJUSB0130Z Plate, Spring All
706 N3CABRD00005 HDD Unit All
707 DZJC000389 Bracket, HDD All
708 DZJH000084 Support, Locking All
709 PJWC1P7105MAssembly, Engine Board Shield Base
OAPD All
710 DZJC000390 Bracket, Counter All
711 DZTK000002 Counter, Mechanical All
712 PJRAC0001Z Sheet, FM All
713 PJMDB0156Z Clamp OAPD All
714 DZJK000069 Clamp All
1901Depends on Destination
PC Board, SCSee Sect. 5.18. PC Boards
1902 PJWPUF9KEM PC Board, Engine Control RTL, PbF All
1903Depends on Destination
PC Board, FXBSee Sect. 5.18. PC Boards
1931 DZEC103051 PC Board, DC RTL, PbF All
1934 DZEC102137 PC Board, FRM8 All
1935 ----- Hardware KeyAvailable as Sales Item
1936 PJWP3P7105M1PC Board, 2nd Paper Feed Module I/F
OAPD RTL, PbF All
1944 PJWP3P7100M1PC Board, Low Toner Sensor
OAPD RTL, PbF All
2405 DZJK000004 Clamp All
L9 XTB3+4F Screw All
T9 XTW3+8S Screw OAPD All
U1 XTW3+6L Screw All
V5 XTW3+6LFC Screw All
128JUN 2004Ver. 2.0
![Page 129: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/129.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 7 Right Side Parts (1/2)
1931
706
V5
L9
L9 707
711
710
U1
712
703
U1
U1
705
U1
1903
1936
U1
T9
1944
709
T9
713
1902
U17021901
714
704
1935
708
708
1934U1
701
U1
U1
2405
129JUN 2004Ver. 2.0
![Page 130: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/130.jpg)
UF-9000
DP-180/190Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
801 PJDGB0052Z Gear, ADU Drive OAPD All
802 PJDGB0070Z Gear, Registration Drive OAPD All
803 PJDGB0072Z Gear, Idle Z19 OAPD All
804 PJDGB0071Z Gear, Double Teeth OAPD All
805 PJDGB0073Z Gear, Idle Z14 OAPD All
806 PJDGB0028Z Gear, Ratchet OAPD All
807 PJDGB0043Z Gear, Registration Arm OAPD All
808 PJDGB0042ZGear, Registration Internal
OAPD All
809 PJDGB0029Z Gear, Planetary OAPD All
810 PJNW4111Z Washer, Plastic OAPD All
811 PJNW525Z Spacer OAPD All
812 PJDGB0051Z Gear, Fuser Drive OAPD All
813 PJDSB0039Z Spring, Gear Tension OAPD All
814 PJDGB0204Z Gear, Intermediate Fuser OAPD All
815 PJDSB0211Z Spring, Pickup OAPD All
816 PJUSB0025Z Spring, Ground OAPD All
817 PJHRA0316Z Guard, Edge OAPD All
818 PJMDB0292Z Bracket, Right Side Cover All
819 PJMDB0259Z Base, Right Side All
820 PJMDB0261Z Bracket, Right Side All
821 PJZC2P7100M Bracket, Gear Support OAPD All
822 PJWMP7100MAssembly, Registration Solenoid
OAPD All
823 PJZHP7105M Bracket, Fuser Drive Gear OAPD All
824 PJHRB0327Z Clamp OAPD All
825 DZJK000068 Clamp All
826 PJJTC0002Z Cable, Ground All
713 PJMDB0156Z Clamp OAPD All
1947 PJWP2P7105M1 PC Board, No Paper Sensor OAPD RTL, PbF All
2404 DZJK000067 Clamp All
2405 DZJK000004 Clamp All
3F XYN3+F5 Screw All
T9 XTW3+8S Screw OAPD All
U1 XTW3+6L Screw All
130JUN 2004Ver. 2.0
![Page 131: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/131.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 8 Right Side Parts (2/2)
820
825
U1
818
T9
U1
2404
811
812
814
813
T9
823819
U1
801
810802
811
803805
1947 T9811
804
808
807806
811
809
T9
U1
817
713
713
T9
Fig. 9
U1
826
U1
816U1
T9
3F
821
822
815
816 U1
824
816 U1
713
825
2405
131JUN 2004Ver. 2.0
![Page 132: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/132.jpg)
UF-9000
DP-180/1905.8. Motor and Drive Gear Unit
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
901 PJDGB0047Z Gear, OPC B OAPD All
902 PJDGB0048Z Gear, OPC A OAPD All
903 PJDGB0049Z Gear, Fuser OAPD All
904 PJDGB0056Z Gear, Registration A OAPD All
905 PJDGB0069Z Gear, Registration B OAPD All
906 PJNW620Z Washer OAPD All
907 L6CCKGEK0003 Motor OAPD All
908 PJZHP7100MAssembly, Drive Gear Bracket
OAPD All
909 PJZHP7305M Bracket, Motor OAPD All
811 PJNW525Z Spacer OAPD All
U1 XTW3+6L Screw All
132JUN 2004Ver. 2.0
![Page 133: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/133.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 9 Motor and Drive Gear Unit
909
907
811
902
811
905
901
903
906
904
908
U1
U1
133JUN 2004Ver. 2.0
![Page 134: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/134.jpg)
UF-9000
DP-180/1905.9. Left Side Parts
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
1001 PJDSB0033Z Spring, Grid OAPD All
1002 PJDSB0148Z Spring, Charge OAPD All
1003 PJDSB0009Y Spring, OPC OAPD All
1004 PJDSB0149Z Spring, Developer OAPD All
1005 N0GG4E000002 HVPS OAPD All
1006 L6FALEGK0009 Motor, Fan OAPD All
1007 PJNEB0008Z Screw OAPD All
1009 PJDRB0059Z Roller, Sub OAPD All
1010 PJDSB0019Z Spring OAPD All
1011 PJMDB0291Z Bracket, Side Cover A All
1012 PJMDB0289Z Bracket, Side Cover B All
1013 PJMDB0290Z Bracket, Left Side Cover All
1014 PJMDB0258Z Stay, Rear All
1015 PJMDB0260Z Base, Left Side All
1016 PJMDB0262Z Bracket, Left Side All
1017 PJMDB0263Z Bracket Left Rear All
1018 PJMDB0264Z Bracket, Right Rear All
1019 PJHRB0659Y Guide, Exit Paper All
1020 PJQTB0263Z Sheet, HVPS Insulation All
1021PJWPWU00001Z
Assembly, LVPSFor UF-9000/DP-190
AU
PJWPF2300EB For DP-180 Except AU
1022 PJHE5065Z Screw OAPD All
610 PJDRB0017Z Roller, Pinch OAPD All
613 PJDFB0008Z Shaft, Roller OAPD All
2403 DZJK000057 Edge Saddle All
2404 DZJK000067 Clamp All
2405 DZJK000004 Clamp All
P3 XTW3+8L Screw All
T9 XTW3+8S Screw OAPD All
U1 XTW3+6L Screw All
U3 XYC3+FF8C Screw OAPD All
134JUN 2004Ver. 2.0
![Page 135: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/135.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 10 Left Side Parts
U11018
1014
1019
U12404
1017
U1
2405
2403
P3610
T9
1015
U1
2405
1016
1013
U1
1007
1006
1001
1005
1004
1020
1002
1003T9
T9
1012
1011
U1U1
1009
610
613
1010
1010
U3
1021
1022
135JUN 2004Ver. 2.0
![Page 136: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/136.jpg)
UF-9000
DP-180/1905.10. Rear and Upper Side Parts
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
1101 PJZBP7305MAssembly, Upper Exit Roller Holder
OAPD All
1102 PJDGB0024Z Gear, Z21 Fuser OAPD All
1103 PJDGB0026ZGear, Z36 Upper Exit Roller Drive
OAPD All
1104 PJDGB0025Z Gear, Internal OAPD All
1105 PJDGB0027Z Gear, Black Ratchet OAPD All
1106 PJDGB0203ZGear, Upper Exit Roller Drive
OAPD All
1107 PJDSB0016Z Spring, Ratchet OAPD All
1108 PJNW721Z Poly Slider OAPD All
1109 PJZC1P7100MAssembly, Upper Exit Roller Holder Cover
OAPD All
1110 PJDPB0001ZSolenoid, Upper Exit Roller with Plunger
OAPD All
1111 PJZR2P7305MAssembly, Upper Exit Roller
OAPD All
1112 PJWSP7105MSwitch, Front Door Safety Interlock
OAPD All
1113 PJWS2P7100MSwitch, OPC Drum Unit Interlock
OAPD All
1114 PJWEP7305M LSU OAPD All
1116 K5AT281613 Core OAPD All
1937 PJWP2P7100M1PC Board, Paper Exit/ADU Paper Jam Sensor
OAPD RTL, PbF All
806 PJDGB0028Z Gear, Ratchet OAPD All
809 PJDGB0029Z Gear, Planetary OAPD All
T9 XTW3+8S Screw OAPD All
U1 XTW3+6L Screw All
U4 XTW3+12S Screw OAPD All
U9 XSN3+4 Screw All
W4 XTB2+12J Screw OAPD All
W7 PJNAC0003Z Screw All
136JUN 2004Ver. 2.0
![Page 137: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/137.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 11 Rear and Upper Side Parts
W71114
1116
1112
W4
1937
1113
W4
1104
809
1102
1105806
1103
1103
1104
809
T9
11061110
1107
U9 T9
1109
11111108
U4
1101
U1
Fig. 12
137JUN 2004Ver. 2.0
![Page 138: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/138.jpg)
UF-9000
DP-180/1905.11. Fuser Unit
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
1201 PJDFB0122Z Shaft, Fuser Drive OAPD All
1202 PJDGB0023Z Gear, Z24 Fuser OAPD All
1203 PJMDB0018Z Plate, Lead Wire OAPD All
1204 L2AA00000090 Thermostat All
1205 PJDRB0091Z Roller, Heat OAPD All
1206 PJDJB0008Z Bushing, Left Heat Roller OAPD All
1207 PJDJB0009ZBushing, Right Heat Roller
OAPD All
1208 PJDGB0021Z Gear, Heat Roller OAPD All
1209
L9DAEJ000001
Lamp, Halogen
OAPD For UF-9000 AU
A4DP3L000003 For DP-190 AU
A4DP7K000002 For DP-180 Except AU
1210 PJMDB0257Y Plate, Lead Wire OAPD All
1212 PJHRB0636Z Base, Fuser Unit OAPD All
1213 PJDSB0015ZSpring, Paper Jam Sensor Lever
OAPD All
1214 PJDJB0010Z Bushing, Pressure Roller OAPD All
1215 PJDSB0205Z Spring, Pressure Roller OAPD All
1216 PJDRB0092Z Roller, Pressure OAPD All
1217 PJDSB0018Z Spring, Pinch Roller A OAPD All
1218 PJMDB0019Y Ground, Fuser OAPD All
1219 PJJRB1025Y Cable, Fuser OAPD All
1220 PJHRB0637Z Lever, Paper Jam Sensor OAPD All
1221 PJHRB0635Z Holder, Heat Roller OAPD All
1222 PJMDB0253Z Plate, Separator OAPD All
1223 PJDSB0206Z Spring, Separator OAPD All
1224 PJHRB0638Z Cover, Left Fuser OAPD All
1225 PJHR9224Z Separator OAPD All
1226 PJZC3P7100MAssembly, Side Fuser Cover
OAPD All
1227 PJZR3P7100MAssembly, Lower Exit Roller
OAPD All
1228 PJZRP7305M Assembly, Cleaning Roller OAPD All
1229 L2AA00000088 Thermistor All
138JUN 2004Ver. 2.0
![Page 139: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/139.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 12 Fuser Unit
12281217
12131220
1212
1227
1208
1207
1214
1215
1215 12061216 1214
1217
610
G8
V1
V1
12091205
1102
1106
1221
1202
1201
T9
1226
T9
U5
U4
T9
T91218
1224
1225
1223 T9
1222
1219
1203
T9
1229
T9T9
U3 U3
1204
12191204
1210
(1210)
1203
1108
1115
1117
139JUN 2004Ver. 2.0
![Page 140: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/140.jpg)
UF-9000
DP-180/190Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
610 PJDRB0017Z Roller, Pinch OAPD All
1102 PJDGB0024Z Gear, Z21 Fuser OAPD All
1106 PJDGB0203ZGear, Upper Exit Roller Drive
OAPD All
1108 PJNW721Z Poly Slider OAPD All
1115J0KF00000046 or
Ferrite Core AllJ0KF00000015
1117
PJZFUS00001Z
Assembly, Fuser Unit
For UF-9000 AU
PJZSF2300AU For DP-190 AU
PJZSF2300EB For DP-180 Except AU
G8 XWC3B Washer, Star All
T9 XTW3+8S Screw OAPD All
U3 XYC3+FF8C Screw OAPD All
U4 XTW3+12S Screw OAPD All
U5 XTW3+12SFZ Screw OAPD All
V1 XYC3+FF6 Screw OAPD All
140JUN 2004Ver. 2.0
![Page 141: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/141.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 12 Fuser Unit
12281217
12131220
1212
1227
1208
1207
1214
1215
1215 12061216 1214
1217
610
G8
V1
V1
12091205
1102
1106
1221
1202
1201
T9
1226
T9
U5
U4
T9
T91218
1224
1225
1223 T9
1222
1219
1203
T9
1229
T9T9
U3 U3
1204
12191204
1210
(1210)
1203
1108
1115
1117
141JUN 2004Ver. 2.0
![Page 142: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/142.jpg)
UF-9000
DP-180/1905.12. Pickup Roller and Paper Feed Roller
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
1301 PJDGB0040Z Gear, Pickup Internal OAPD All
1302 PJDGB0041Z Gear, Pickup Arm OAPD All
1303 PJDRB0021Z Roller, Registration OAPD All
1304 PJDGB0038Z Gear, Registration Roller OAPD All
1305 PJDRB0022Z Roller, Paper Feed OAPD All
1306 PJDJ05041RZ Bearing, R5 OAPD All
1307 PJDGB0039Z Gear, Paper Feed Roller OAPD All
1308 PJHRB0070Z Wheel, Drive OAPD All
1309 PJDJB0019Z Bushing OAPD All
1311 PJDFB0163Z Shaft, Pickup Roller OAPD All
1312 PJDSB0207Z Spring, Pickup Holder OAPD All
1313 PJHRB0640Z Adapter, Pickup Holder OAPD All
1314 PJDSB0208Z Spring, Dust Scraper OAPD All
1315 PJZC1P7305MAssembly, Dust Scraper Cover
OAPD All
1316 PJZR1P7305M Roller, Pickup OAPD PM All
1317 PJNW820Z Washer, Plastic OAPD All
1318 PJZEP7305M Guide, Sub. Paper OAPD All
1319 PJZE1P7100M Assembly, Pickup Lever OAPD All
1320 PJWMP7305M Assembly, Pickup Solenoid OAPD All
611 PJDRB0093Z Roller, Cleaning OAPD All
809 PJDGB0029Z Gear, Planetary OAPD All
810 PJNW4111Z Washer, Plastic OAPD All
815 PJDSB0211Z Spring, Pickup OAPD All
1022 PJHE5065Z Screw OAPD All
1105 PJDGB0027Z Gear, Black Ratchet OAPD All
U8 XTW3+U8S Screw OAPD All
142JUN 2004Ver. 2.0
![Page 143: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/143.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 13 Pickup Roller and Paper Feed Roller
1306
13041306
13071308
13191311
13061105
1302
809
809
1301
815
1320
1022
U8
1306
810
1313
1316
1315
1312
1303
1305
1318
1309
1309
1317 6111314
143JUN 2004Ver. 2.0
![Page 144: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/144.jpg)
UF-9000
DP-180/1905.13. Bottom Side Parts
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
1401 PJUAB0024Y Plate, Lower Base OAPD All
1402 PJMDB0020Z Plate, ADU Pinch Roller OAPD All
1403 PJDRB0018Z Roller, ADU Pinch OAPD All
1404 PJDFB0009Z Shaft, A/D Roller OAPD All
1405 PJDSB0041Z Spring, Pinch Roller OAPD All
1406 PJNW317Z Poly Slider OAPD All
1407 PJNW410Z Washer OAPD All
1408 PJUAB0005YPlate, ADU Registration Roller
OAPD All
1409 PJDRB0014ZShaft, ADU Registration Roller
OAPD All
1410 PJDJ05011CZ Bearing, C5 OAPD All
1411 PJDGB0030Z Gear, A/D Unit Union OAPD All
1412 PJDSB0017Z Spring OAPD All
1413 PJJTCC014Z Cable OAPD All
1414 PJHRB0320Z Lever, No Paper Sensor OAPD All
1415 PJHRB0075ZLever, Registration Sensor
OAPD All
1416 PJHRB0076ZLever, Paper Detect Sensor
OAPD All
1417 PJDSB0035Z Spring, Registration OAPD All
1418 PJZUP7100M Pan, Jam Release OAPD All
1306 PJDJ05041RZ Bearing, R5 OAPD All
1938 PJWP2P7305MPC Board, Registration/Paper Detect Sensor
OAPD RTL, PbF All
P3 XTW3+8L Screw All
U1 XTW3+6L Screw All
U6 XUC4VW-V E-Ring OAPD All
U7 PJNEB0003Y Screw OAPD All
T9 XTW3+8S Screw OAPD All
144JUN 2004Ver. 2.0
![Page 145: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/145.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 14 Bottom Side Parts
1938
T9
1416 1415
1417
1414
1409
1306U6
1410
1411
1408
1401T9
P3
14031405
1405
U1
U1
1404
14071406
1402
1406
1413
1412
U7
U7
1412T9
1418 T9
145JUN 2004Ver. 2.0
![Page 146: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/146.jpg)
UF-9000
DP-180/1905.14. Mechanical Base
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
1501 PJHRB0324Z Holder, Transfer Roller OAPD All
1502 PJDSB0040Z Spring, Transfer OAPD All
1503 PJDRB0081Z Roller, Bias Transfer OAPD PM All
1504 PJHRB0078Z Bushing OAPD All
1505 PJDGB0057Z Gear, Transfer OAPD All
1506 PJDJB0020Z Bearing, U OAPD All
1507 PJHRB0038Z Arm, Left Pressure OAPD All
1508 PJHRB0037Z Arm, Right Pressure OAPD All
1509 PJUSB0011Y Plate, Ground OAPD All
1510 PJUSB0008ZPlate, Transfer Bias Roller
OAPD All
1511 PJDSB0026Z Spring, Left OPC OAPD All
1512 PJDSB0008Z Spring, Right OPC OAPD All
1513 PJDSB0043Z Spring, Left Registration OAPD All
1514 PJDSB0010ZSpring, Right Registration
OAPD All
1515 PJDSB0024Z Spring, Paper Tray Guide OAPD All
1516 PJMCB0070Z Plate, Ground 1 OAPD All
1517 PJMCB0068Z Plate, Ground 2 OAPD All
1518 PJZCP7305M Assembly, Paper Chute OAPD All
713 PJMDB0156Z Clamp OAPD All
811 PJNW525Z Spacer OAPD All
815 PJDSB0211Z Spring, Pickup OAPD All
P3 XTW3+8L Screw All
T9 XTW3+8S Screw OAPD All
U1 XTW3+6L Screw All
U8 XTW3+U8S Screw OAPD All
V1 XYC3+FF6 Screw OAPD All
146JUN 2004Ver. 2.0
![Page 147: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/147.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 15 Mechanical Base
1507
U8
1515
1513
1508U8
1515
1514
1518
1503811
1504
8111504
1505
811
1501
1501
1502
1502
1506
T9
1509
V1
T9
1511
U8
1510
U1
1516
T9
T9
8151512
U1
P3713
1517
147JUN 2004Ver. 2.0
![Page 148: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/148.jpg)
UF-9000
DP-180/1905.15. Paper Tray
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
1601 PJMDB0026Y Lifter, Paper OAPD All
1602 PJHSB0007Z Pad, Friction OAPD All
1603 PJDSB0179Z Spring, Retard Pad OAPD All
1604 PJHRB0031Z Guide, Right Paper Side OAPD All
1605 PJHRB0032Z Guide, Left Paper Side OAPD All
1606 PJDSB0210Y Spring, Friction OAPD All
1607 PJDSB0020Z Spring, Stopper OAPD All
1608 PJHRB0034Z Stopper OAPD All
1609 PJHRB0029Y Assembly, Paper Tray Base OAPD All
1610 PJHRB0030ZTray, Paper Tray Extension
OAPD All
1611 PJHRB0033Z Knob, Paper Size OAPD All
1612 PJHRB0307ZIndicator, Orange Paper Level
OAPD All
1613 PJDG50133Z Gear, Pinion OAPD All
1614 PJHRB0036Z Rack OAPD All
1615 PJZEP7100M1 Pad, Separation OAPD PM All
1616 PJHRB0476Z Adapter, Retard OAPD All
1617 PJGEC0002Z Sheet, Paper Tray AFor UF-9000/DP-190
AU
1618 PJGEC0003Z Sheet, Paper Tray BFor UF-9000/DP-190
AU
1619 PJGEC0006Z Sheet, Paper Tray CFor UF-9000/DP-190
AU
1620 PJGEC0007Z Sheet, Paper Tray DFor UF-9000/DP-190
AU
1621 PJGEC0008Z Sheet, Paper Tray EFor UF-9000/DP-190
AU
1622 PJGFC0011ZLabel, Max. Level Indicator 1
All
1623 PJHRC0051Z Sheet, Separation Pad All
U8 XTW3+U8S Screw OAPD All
148JUN 2004Ver. 2.0
![Page 149: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/149.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 16 Paper Tray
1606
1602
U8 U8
U8
1613
1614
16141610
16111604
1612
U8
1605
1622
1601
16081607
16031616
16151606
1609
1623
1617
1618
1621
1620
1619
149JUN 2004Ver. 2.0
![Page 150: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/150.jpg)
UF-9000
DP-180/1905.16. 2nd Paper Feed Module
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
1701 PJKEB0019Z Cover, Front OAPD All
1702 PJKEB0097Z Cover, Right All
1703 PJKEB0098Z Cover, Left All
1704 PJUSB0027Z Plate, Pinch Roller OAPD All
1705 PJDRA0051Z Roller, Pinch OAPD All
1707 PJHRB0082Z Guide, Left Front OAPD All
1708 PJHRB0083Z Guide, Left Rear OAPD All
1709 PJHRB0080Z Guide, Right Front OAPD All
1710 PJHRB0081Z Guide, Right Rear OAPD All
1711 PJUSB0080Z Spring, Ground OAPD All
1712 PJDFB0025Z Shaft, Pickup Roller OAPD All
1713 PJHRB0445Z Rib, Paper Chute OAPD All
1714 PJDJ06061CZ Bearing OAPD All
1715 PJDJ06121RZ Bearing OAPD All
1716 PJDRB0025Z Roller, Paper Feed OAPD All
1717 PJDGB0058Z Gear 1 OAPD All
1718 PJDGB0059Z Gear 2 OAPD All
1719 PJDGB0060Z Gear 3 OAPD All
1720 PJDGB0061Z Gear 4 OAPD All
1721 PJMDB0037Z Bracket, Gear OAPD All
1722 PJHRB0079Z Arm, Sensor OAPD All
1723 XPL2A10WVW Pin OAPD All
1724 PJUAB0007Z Chassis, Right OAPD All
1725 PJUAB0008Z Chassis, Left OAPD All
1726 PJMDB0036Y Frame, Chassis OAPD All
1727 PJHG351Z Plate, Rubber OAPD All
1728 PJMDB0190Z Plate, Corner OAPD All
1729 PJHRB0521Z Bushing OAPD All
1730 PJYFPMF3M Assembly, Top Cover OAPD All
1731 PJMDB0035Y Paper Chute OAPD All
1732 PJZUPMF3M Assembly, Paper Guide OAPD All
1733 PJZRPMF3M Roller, Pickup OAPD PM All
1734 PJWMPMF3M Clutch OAPD All
1735 PJWQPMF3M Motor OAPD All
1736 PJULC0023Z Bracket, L All
1737 PJULC0022Z Bracket, R All
1738 PJMDB0256Z Bracket, Joint All
1739 PJHRB0684Z Sheet, Bracket All
1740 PJHRC0055Z Sheet, Paper Chute All
1741 PJHRC0176Z Plate, Spacer All
1742 PJHRC0154Z Sheet, Clutch Guide All
150JUN 2004Ver. 2.0
![Page 151: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/151.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 17 2nd Paper Feed Module
U1
U1
U1
17281726
U1
1708
U1
1710
U1
U1
1728
1731
1737V6
1711
1733
1736
1725
1515
U1
1707
1727
1727
1709
1701
U11732
U1
U1
U1
1702
1703
17041705V2
T9
17161410
1717
1306810
1715
8111723
1712
1714
811
1401
V6
1515U1
1713
1724
17111729
811
U1U1
1734
1742
17351721
1719
1720
1718
V3
1730U1
U1
1945
U1
1738
1739
1739
1738U1
1722
U1U1U1
U1
U11741
1740
151JUN 2004Ver. 2.0
![Page 152: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/152.jpg)
UF-9000
DP-180/190Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
810 PJNW4111Z Washer, Plastic OAPD All
811 PJNW525Z Spacer OAPD All
1306 PJDJ05041RZ Bearing, R5 OAPD All
1401 PJUAB0024Y Plate, Lower Base OAPD All
1410 PJDJ05011CZ Bearing, C5 OAPD All
1515 PJDSB0024Z Spring, Paper Tray Guide OAPD All
1945 PJWPPMF3M2 PC Board, 2nd Feeder OAPD RTL, PbF All
T9 XTW3+8S Screw OAPD All
U1 XTW3+6L Screw All
V2 XTW3+6S Screw All
V3 XWE4 Washer All
V6 XTB3+8JFN Screw OAPD All
152JUN 2004Ver. 2.0
![Page 153: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/153.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 17 2nd Paper Feed Module
U1
U1
U1
17281726
U1
1708
U1
1710
U1
U1
1728
1731
1737V6
1711
1733
1736
1725
1515
U1
1707
1727
1727
1709
1701
U11732
U1
U1
U1
1702
1703
17041705V2
T9
17161410
1717
1306810
1715
8111723
1712
1714
811
1401
V6
1515U1
1713
1724
17111729
811
U1U1
1734
1742
17351721
1719
1720
1718
V3
1730U1
U1
1945
U1
1738
1739
1739
1738U1
1722
U1U1U1
U1
U11741
1740
153JUN 2004Ver. 2.0
![Page 154: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/154.jpg)
UF-9000
DP-180/1905.17. Paper Tray (2nd Paper Feed Module)
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
1801 PJHRB0338Z Base, Paper Tray OAPD All
1802 PJHRB0340Z Guide, Right Paper Side OAPD All
1803 PJHRB0341Z Guide, Left Paper Side OAPD All
1804 PJHRB0339ZCase, Paper Tray Extension
OAPD All
1805 PJDSB0190Z Spring, Retard Pad OAPD All
1806 PJHRB0344ZIndicator, Orange Paper Level
OAPD All
1807 PJDSB0157Y Spring Friction OAPD All
1808 PJUSB0089Z Spring, Side Guide OAPD All
1809 PJMDB0155Y Lifter, Paper OAPD All
1810 PJHRB0343Z Cover, Lifter OAPD All
1811 PJHRB0447Z Guide, Paper OAPD For DP-180 Except AU
1812 PJZEPMF3M1 Pad, Separation OAPD PM All
1813 PJZE1PMF3M Assembly, Paper Size Knob OAPD All
1814 PJGEC0004Z Sheet, Paper Tray FFor UF-9000/DP-190
AU
1815 PJGEC0005Z Sheet, Paper Tray GFor UF-9000/DP-190
AU
1816 PJGEC0009Z Sheet, Paper Tray HFor UF-9000/DP-190
AU
1817 PJGEC0010Z Sheet, Paper Tray IFor UF-9000/DP-190
AU
1818 PJGFC0012ZLabel, Max. Level Indicator 2
All
1819 PJHGC0004Z Rubber, Separation Pad All
1820 PJHRC0216Z Sheet, 2nd Separation Pad All
1821 PJHGC0005Z Rubber, Paper Size Knob All
1822 PJHRC0056Z Sheet, Paper Size Knob All
1602 PJHSB0007Z Pad, Friction OAPD All
1607 PJDSB0020Z Spring, Stopper OAPD All
1608 PJHRB0034Z Stopper OAPD All
1613 PJDG50133Z Gear, Pinion OAPD All
1614 PJHRB0036Z Rack OAPD All
U8 XTW3+U8S Screw OAPD All
154JUN 2004Ver. 2.0
![Page 155: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/155.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 18 Paper Tray (2nd Paper Feed Module)
16021817
1809
1810
1810
1608 1607
1819
1807
1806
1807
18031818
1805
1812
1820
1811
18041813
1822
18211815
16141614
1613U8
U8
1811
1802
18081801
1816
1814
155JUN 2004Ver. 2.0
![Page 156: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/156.jpg)
UF-9000
DP-180/1905.18. PC Boards
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
1901
DZEC103128
PC Board, SC
For UF-9000RTL, PbF
AU
DZEC103111For DP-190RTL, PbF
AU
DZEC103454
For DP-180RTL, PbF
Except AU, AG, AV, YV
DZEC103455 AG
DZEC103456 AV
DZEC103460 YV
1902 PJWPUF9KEM PC Board, Engine Control RTL, PbF All
1903
DZEC102932
PC Board, FXB
For UF-9000RTL, PbF
AU
DZEC103220For DP-190RTL, PbF
AU
DZEC103331 For DP-180RTL, PbF
AL, EB
DZEC103219 Except AL, EB
1905DZEC102978
PC Board, PNL1 RTL, PbFExcept YV
DZEC103469 YV
1906
DZEC102979
PC Board, PNL2
For UF-9000RTL, PbF
AU
DZEC103158For DP-180/190RTL, PbF
All
1908 DZEC102992 PC Board, PNL4 RTL, PbF All
1910 7UA1810AF11A PC Board, SPC PbF All
1911 7UA1810AS11A PC Board, ADF PbF All
1913 PJJRML0019Z Harness, LSU OAPD All
1914 PJJRML0020Z Harness, Motor OAPD All
1915 PJJRB1027Z Harness, LVPS All
1916 PJJRML0011Z Harness, Low Toner Sensor OAPD All
1917 PJJEC10003YHarness, HVPS (Flat Harness)
OAPD All
1918 PJJEC04002ZHarness, Exit Sensor (Flat Harness)
OAPD All
1919 PJJEC05002ZHarness, Registration Detect Sensor (Flat Harness)
OAPD All
1920 PJJRML0015Z Harness, No Paper Sensor OAPD All
1921 PJJRML0014ZHarness, 2nd Paper Feed Module I/F Board
OAPD All
1922 739909000620Cable, CCD (Flat Harness)
All
1923 737300121950 Cable, USB All
1924 737420001290 Harness, Scanner All
1925 737420001312 Cable, ADF All
1926 737420001300 Harness, PNL All
1927 DZFP001556 Harness, FXB All
1928 DZFP001558 Harness, Speaker All
1929 DZFP001555Cable, ECB (Flat Harness)
All
1930 DZFP001554 Harness, Power Supply All
156JUN 2004Ver. 2.0
![Page 157: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/157.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 19 PC Boards / Harnesses
1925
1949
1734 1735541
554
542
428 540
1923
1924
1922
222
221
1925
SC (1901)
Engine Control (1902)
FXB (1903)
DC (1931)2nd Feeder (1945)
ADF (1911)
SPC (1910)
PNL1 (1905)
PNL2 (1906)
1950
1935
1934
1915 1930 1923 1929 1924 1926 1927
1932
1926 127
1942
1939 1906
1948 1939 1940
1908 1943
1941
1940
1919
1916
1920
1921
1953 1112
1917 822
1914 1006
1320
1951 1952
1929
1928 1927
1918 1913 1113 1930
CN300CN301
CN305CN308 CN304
CN306 CN309
CN002 CN003 CN005
CN001
CN006 CN010
P101
P102
P106
P105
P104
P103
CN143
CN141
CN602
CN600CN601
CN004
CN110CN114
CN008CN017
CN016
CN015CN014
CN009
PA04
PA08
PA05
PA02 PA03
PA01
CN011 CN013 CN007CN018CN012
CN220 CN223 CN234
CN230
CN231CN233
CN232CN302
CN330
CN324
CN328
1932
1933
157JUN 2004Ver. 2.0
![Page 158: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/158.jpg)
UF-9000
DP-180/190Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
1931 DZEC103051 PC Board, DC RTL, PbF All
1932 DZFP001565 Harness, HD All
1933 DZFP001566 Harness, DC All
1934 DZEC102137 PC Board, FRM8 All
1935 ----- Hardware KeyAvailable as Sales Item
1939 DZFP001561 Harness, PNL1-PNL2_17PIN All
1940 DZFP001562 Harness, PNL1-PNL2_14PIN All
1941 DZFP001563 Harness, PNL1-PNL3_18PIN All
1942 DZFP001564 Harness, PNL1-PNL3_10PIN All
1943 DZFP001548 Harness, PNL2-PNL3_5PIN All
1945 PJWPPMF3M2 PC Board, 2nd Feeder OAPD RTL, PbF All
1948 DZFP001574 Harness, Book-PNL All
1949 PJWLPMF3M Cable, I/F OAPD All
1950 DZFP001567 Harness, MC All
1951 PJJRB1026ZHarness, Exit Solenoid Relay
All
1952 PJJRB1028Z Harness, Termistor Relay All
1953 PJJRML0021Y Harness, Main Motor OAPD All
127 DZDA000047 LCD Module All
221 738902000340 Motor All
222 737430400030 Sensor, Home Detect All
428 737430400020 Sensor, 400mm All
540 737430400010 Sensor, 320mm All
541 738902000331 Motor All
542 737428200050 Sensor, Cover All
554 7UA1810A951B Assembly, Stamp All
822 PJWMP7100MAssembly, Registration Solenoid
OAPD All
1006 L6FALEGK0009 Motor, Fan OAPD All
1112 PJWSP7105MSwitch, Front Door Safety Interlock
OAPD All
1113 PJWS2P7100MSwitch, OPC Drum Unit Interlock
OAPD All
1320 PJWMP7305M Assembly, Pickup Solenoid OAPD All
1734 PJWMPMF3M Clutch OAPD All
1735 PJWQPMF3M Motor OAPD All
158JUN 2004Ver. 2.0
![Page 159: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/159.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 19 PC Boards / Harnesses
1925
1949
1734 1735541
554
542
428 540
1923
1924
1922
222
221
1925
SC (1901)
Engine Control (1902)
FXB (1903)
DC (1931)2nd Feeder (1945)
ADF (1911)
SPC (1910)
PNL1 (1905)
PNL2 (1906)
1950
1935
1934
1915 1930 1923 1929 1924 1926 1927
1932
1926 127
1942
1939 1906
1948 1939 1940
1908 1943
1941
1940
1919
1916
1920
1921
1953 1112
1917 822
1914 1006
1320
1951 1952
1929
1928 1927
1918 1913 1113 1930
CN300CN301
CN305CN308 CN304
CN306 CN309
CN002 CN003 CN005
CN001
CN006 CN010
P101
P102
P106
P105
P104
P103
CN143
CN141
CN602
CN600CN601
CN004
CN110CN114
CN008CN017
CN016
CN015CN014
CN009
PA04
PA08
PA05
PA02 PA03
PA01
CN011 CN013 CN007CN018CN012
CN220 CN223 CN234
CN230
CN231CN233
CN232CN302
CN330
CN324
CN328
1932
1933
159JUN 2004Ver. 2.0
![Page 160: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/160.jpg)
UF-9000
DP-180/1905.19. Packing and Accessories
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
2001
PJPGB0254Z
Carton Box
For UF-9000 AU
PJPGB0254Y For DP-190 AU
PJPGB0254WFor DP-180
YV
PJPGB0254X Except AU, YV
2002 PJPGB0255Z Carton, Bottom All
2003 PJPGB0256Z Pad, Bottom All
2004 PJPNB0186Z Cushion, Bottom All
2005 PJPNB0187Z Cushion, Rear All
2006 PJPNB0176Z Cushion, Top All
2007 ----- Drum UnitAvailable as Sales Item
2008 ----- TonerAvailable as Sales Item
2009
DZFM000114
Cord, AC Power
For UF-9000/DP-190
AU
DZFM000073 or
For DP-180
AG, AV, EH, EP, ER, YA, YCDZFM000028
DZFM000031 AL
DZFM000076 orAM
DZFM000032
DZFM000064 EB, ES
DZFM000074 orEE
DZFM000030
DZFM000061 YA
DZFM000043YV
DZFM000065
2010
DZFN000050
Cable, Telephone Line
AU, EB, EP, ER, ES, YA, YC, YV
DZFN000069
For DP-180
AG
DZFN000095AL, EB
DZFN000120
DZFN000017 AL
DZFN000096 AM
DZFN000104 AM, AV, EH, ER
DZFN000030 EH
DZFN000078 EE
DZFN000016 EP
2011 PJQMB0137ZOperating Instructions (For Copy & Network Scan Functions)
For UF-9000 AU
2012 PJQMB0138ZOperating Instructions (For Facsimile and Internet Fax/Email)
For UF-9000 AU
2013
PJWACC00001
Software CD
For UF-9000 AU
PJWACC00003 For DP-190 AU
PJWACC00005For DP-180
Except AU, YV
PJWACC00007 YV
160JUN 2004Ver. 2.0
![Page 161: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/161.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 20 Packing and Accessories
2001
2017
2017
2006
2005
2004
2003
2002
625
211
2014
2016
2010
2009
2013
2015
2020
20212022
2008
20192018
2007
2010
2009
2013
2011
2012
2015
2008
2007
For UF-9000
For DP-180/190
161JUN 2004Ver. 2.0
![Page 162: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/162.jpg)
UF-9000
DP-180/190Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
2014 PJQHB0015Z Installation Instructions All
2015PJQTB0262Z
Directory HolderFor UF-9000 AU
PJQTC0027Z For DP-180/190 All
2016 PJPEB0045Z Box, Accessories All
2017 DZRG000003 Joint All
2018
PJQQC0004Z
Quick Guide
For DP-190 AU
For DP-180 YA
PJQQC0005Z
For DP-180
AG, AL, AM, AV, EB, EE, EH, EP
PJQQC0006Z ER
PJQQC0007Z YC
2019 PJWACC00002 Operating Instructions CD For DP-180/190 All
2020
DZFB000010
PTT Plug For DP-180
AL
DZFN000108 AM
DZFN000105 AV
DZFB000001 EH
DZFN000107
ERDZFN000109
DZFN000119
2021
PJQMC0029ZOperating Instructions (For Copy Arabic)
For DP-180
ES
PJQMC0034ZOperating Instructions (For Copy Chinese)
YV
2022 PJQMC0052ZOperating Instructions (For Fax Chinese)
For DP-180 YV
211 92123C003H Cover, Hole All
625 PJKEB0130Z Cover, Rear Paper Tray All
162JUN 2004Ver. 2.0
![Page 163: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/163.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 20 Packing and Accessories
2001
2017
2017
2006
2005
2004
2003
2002
625
211
2014
2016
2010
2009
2013
2015
2020
20212022
2008
20192018
2007
2010
2009
2013
2011
2012
2015
2008
2007
For UF-9000
For DP-180/190
163JUN 2004Ver. 2.0
![Page 164: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/164.jpg)
UF-9000
DP-180/1905.20. Printer Controller Module for PCL6
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
2101 DZRB000143 Carton Box All
2102DZHP009971
Software CDFor UF-9000/DP-190
AU
DZHP010345 For DP-180 Except AU
2103 DZSM000795 Installation Instructions All
2104 DZSM000756Installation Instructions (Expansion F-ROM Board)
For DP-180 Except AU
708 DZJH000084 Support, Locking For DP-180 Except AU
1934 DZEC102137 PC Board, FRM8 For DP-180 Except AU
1935 ----- Hardware KeyAvailable as Sales Item
164JUN 2004Ver. 2.0
![Page 165: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/165.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 21 Printer Controller Module for PCL6
2101
2102
1935
2103
2104
1934
708
165JUN 2004Ver. 2.0
![Page 166: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/166.jpg)
UF-9000
DP-180/1905.21. Printer Controller Module for PS/PCL6
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
2201DZHP009973
Software CD
For UF-9000/DP-190
AU
DZHP010343 For DP-180 Except AU
2202 DZSM000796 Installation Instructions All
708 DZJH000084 Support, Locking For DP-180 Except AU
1934 DZEC102137 PC Board, FRM8 For DP-180 Except AU
1935 ----- Hardware KeyAvailable as Sales Item
2101 DZRB000143 Carton Box All
2104 DZSM000756Installation Instructions (Expansion F-ROM Board)
For DP-180 Except AU
166JUN 2004Ver. 2.0
![Page 167: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/167.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 22 Printer Controller Module for PS/PCL6
21012201
1935
22022104
1934
708
167JUN 2004Ver. 2.0
![Page 168: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/168.jpg)
UF-9000
DP-180/1905.22. 2nd Paper Feed Module Packing and Accessories
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
2301PJPGB0230Z
Carton BoxAU, YV
PJPGB0230Y For DP-180 Except AU, YV
2302 PJPNB0154Z Cushion, Front All
2303 PJPNB0155Z Cushion, Rear All
2304 PJPNB0082Z Cushion, Inner OAPD All
2305 PJHRB0701Z Cushion, Leg All
2306 PJQMB0132Z Installation Instructions All
1736 PJULC0023Z Bracket, L All
1737 PJULC0022Z Bracket, R All
1738 PJMDB0256Z Bracket, Joint All
1739 PJHRB0684Z Sheet, Bracket All
V6 XTB3+8JFN Screw OAPD All
U1 XTW3+6L Screw All
168JUN 2004Ver. 2.0
![Page 169: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/169.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 23 2nd Paper Feed Module Packing and Accessories
2303
2306
2305
V6
1738, 1739
2304
2302
2301
U1
17361737
169JUN 2004Ver. 2.0
![Page 170: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/170.jpg)
UF-9000
DP-180/1905.23. Hard Disk Drive Unit
Safety Mark
Ref. No.
Parts Number Part Name Supplier Remarks Destination
2401 DZRB000733 Carton Box All
2402 DZRB000750 Cushion All
2403 DZJK000057 Edge Saddle All
2404 DZJK000067 Clamp All
2405 DZJK000004 Clamp All
2406 DZSM000797 Installation Instructions All
706 N3CABRD00005 HDD Unit All
707 DZJC000389 Bracket, HDD All
1931 DZEC103051 PC Board, DC RTL, PbF All
1932 DZFP001565 Harness, HD All
1933 DZFP001566 Harness, DC All
L9 XTB3+4F Screw All
V5 XTW3+6LFC Screw All
170JUN 2004Ver. 2.0
![Page 171: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/171.jpg)
UF-9000
DP-180/190A C D EB
8
1
3
4
5
6
7
222
Fig. 24 Hard Disk Drive Unit
2406
2405
V5
L9
706
2402
2401
707
1931
2404
1932
1933
2403
171JUN 2004Ver. 2.0
![Page 172: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/172.jpg)
UF-9000
DP-180/1905.24. Hardware Identification Template
Part No. Figure RemarkRef. No.
ScrewXYN3+F53F
ScrewXTB3+8GF10
ScrewXTW3+8LP3
ScrewXTW26+8ST8
ScrewXTW3+8ST9
ScrewXTW3+6LU1
ScrewXYC3+FF8CU3
ScrewXTW3+12SU4
ScrewXTW3+12SFZU5
ScrewPJNEB0003YU7
ScrewXTB3+8J19
ScrewXTW3+8PP8
ScrewXTW3+8LFNH8
ScrewXTB3+4FL9
E-Ring21070121706447
Washer, StarXWC3BG8
E-RingXUC4VW-VU6
ScrewXTW3+U8SU8
172JUN 2004Ver. 2.0
![Page 173: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/173.jpg)
UF-9000
DP-180/190WasherXWE4V3
ScrewXTW3+8PFNV7
ScrewXTW4+16PV8
ScrewXTW3+6LFNV9
ScrewXTS3+8JW1
ScrewDZZSP29011W2
ScrewXTB2+12JW4
ScrewXSN2+10FNW5
ScrewXTW4+8LFNY11
ScrewXTW3+6LFCV5
ScrewXTB3+8JFNV6
ScrewPJNAC0003ZW7
ScrewXTN3+8JFNW8
ScrewXTW3+6SV2
ScrewXSN3+4U9
ScrewXYC3+FF6V1
Part No. Figure RemarkRef. No.
173JUN 2004Ver. 2.0
![Page 174: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/174.jpg)
UF-9000
DP-180/1906 Alphanumerical Parts List
Alphanumerical Parts ListPart Number Part Name Ref. No. Supplier PM Destination
21070121706 E-Ring 447 All
735109001050 Core 305 All
737300121950 Cable, USB 1923 All
737420001290 Harness, Scanner 1924 All
737420001300 Harness, PNL 1926 All
737420001312 Cable, ADF 1925 All
737428200050 Sensor, Cover 542 All
737430400010 Sensor, 320mm 540 All
737430400020 Sensor, 400mm 428 All
737430400030 Sensor, Home Detect 222 All
738902000331 Motor 541 All
738902000340 Motor 221 All
738903000110 Lamp, Scanning 303 All
739909000620 Cable, CCD (Flat Harness) 1922 All
783309000120 E-Ring 224 All
7UA1810A631B Assembly, Pickup 449 All
7UA1810A681B Assembly, Scanner Cover 219 All
7UA1810A721B Assembly, CCD Module (For UF-9000/DP-190) 301 AU
7UA1810A722B Assembly, CCD Module (DP-180) 301 Except AU
7UA1810A951B Assembly, Stamp 554 All
7UA1810AF11A PC Board, SPC 1910 All
7UA1810AS11A PC Board, ADF 1911 All
7UZFFA02501B ADF Unit 442 All
81123D148H Gear, 12T 422 All
81123D150H Gear, 23T 416 All
81123D156H Gear, 24T 434 All
81133D040H Spring, Tension 426 All
81141C001H Magnetic 535 All
81150C008H Switch, Magnetic 201 All
81158D013H Rivet, Snap 551 All
81325D113H Cover, Inverter 306 All
91100D001H Shaft 509 All
91102B002H Plate, Rear Attachment 526 All
91102C002H Plate, Front Attachment 522 All
91102C004H Plate, Reading 518 All
91102D002H Spring, Ground 517 All
91102D004H Plate, ADF Roller Fix 409 All
91102D005H Plate, Roll Fix 407 All
91102D007H Spring, Roller Pressure 506 All
91102D011H Holder, Pulley 209 All
91102D012H Sheet, Holder 208 All
91110D002H Shaft, ADF 418 All
91110D003H Shaft, Pickup 415 All
91110D007H Pin 425 All
91123A002H Frame, ADF 511 All
91123A003H Cover, Frame 510 All
91123A004H Base, ADF 405 All
91123D001H Roll, Pinch 508 All
91123D002H Knob, Paper Transport 525 All
91123D003H Arm, Sensor 507 All
174JUN 2004Ver. 2.0
![Page 175: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/175.jpg)
UF-9000
DP-180/19091123D004H Base, Pad 546 All
91123D005H Cover, Tray 435 All
91123D006H Level, Sensor 406 All
91123D008H Rack, Guide 433 All
91123D009H Gear, 18/45T 528 All
91123D010H Gear, 30T 533 All
91123D012H Gear, 33T 521 All
91123D013H Gear, 48T 527 All
91123D014H Gear, 26T 531 All
91123D015H Gear, 18/40T 529 All
91123D021H Base, Pickup 412 All
91123D022H Arm, Stopper 413 All
91123D023H Shutter, Left 421 All
91123D024H Shutter, Right 420 All
91123D025H Roller 408 All
91123D034H Pulley, Idle 210 All
91123D035H Collar 206 All
91123D042H Base, Dummy Hinge 439 All
91123D043H Hinge, Upper Dummy 443 All
91123D053H Hook, Top Cover 524 All
91127C001H Roller, Feed 516 PM All
91127C002H Roller, Exit 519 All
91127C003H Roller, ADF 417 PM All
91127C004H Roller, Pickup 414 PM All
91127D001H Roll, Exit 503 All
91127D002H Rubber, Separation 547 PM All
91129D004H Sheet, Pad 548 All
91129D008H Sheet, Guide 534 All
91129D009H Sheet, Pressure 549 All
91129D010H Sheet, Trace 427 All
91133D001H Spring, Exit Roller 504 All
91133D002H Spring, Tension 513 All
91133D004H Spring, Tension 207 All
91133D005H Spring, Reading Plate 532 All
91133D006H Spring, Torsion 550 All
91134C001H Hinge, ADF 403 All
91134D001H Sheet, Pickup 515 All
91134D002H Brush, Antistatic 539 All
91137D002H Screw, Dummy Hinge 440 All
91142D002H Bushing, D6 537 All
91192D001H Plate, Motor Attachment 512 All
92102C001H Plate, Motor Fix 204 All
92102C002H Cover, Main Board 216 All
92102C003H Base, Cover 217 All
92102C007H Plate, Metal 215 All
92102D005H Spring, Plate 223 All
92102D007H Plate, FFC Set 226 All
92102D008H Plate, Seal 227 All
92102D009H Plate, Core Set 228 All
92110C001H Shaft, IR 202 All
92110D001H Shaft, Transfer 419 All
92123A001H Frame, IR Base 212 All
92123A004H Base, ADF 501 All
Alphanumerical Parts ListPart Number Part Name Ref. No. Supplier PM Destination
175JUN 2004Ver. 2.0
![Page 176: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/176.jpg)
UF-9000
DP-180/19092123A005H Cover, Top ADF 401 All
92123A006H Guide, Document 429 All
92123A007H Cover, Rear ADF 402 All
92123B001H Guide, Extend Document 430 All
92123C001H Guide, Rear 432 All
92123C002H Guide, Front 431 All
92123C003H Cover, Hole 211 All
92123C004H Cover, Harness 218 All
92123D001H Gear, 60T/P16T 205 All
92123D002H Gear, 32/15T 530 All
92123D003H Gear, 20T 423 All
92123D004H Gear, 23S 410 All
92123D005H Gear, 19S 411 All
92123D006H Holder, Pickup Sheet 514 All
92123D011H Cover, Dummy Hinge 441 All
92123D012H Stud, Gap 520 All
92123D014H Lib, Fix Plate 523 All
92123D015H Cover, Protect 505 All
92125D001H Sheet, Tray 436 All
92125D006H Seal, CCD Harness 213 All
92125D007H Label, Max. Capacity Indicator 437 All
92129D001H Sheet, White Reference 536 All
92129D002H Sheet, Protect Cover 502 All
92129D004H Sheet, Gap Limit 538 All
92129D008H Sheet, Plate 552 All
92129D010H Seal, Screw 225 All
92129D021H Gasket 1 230 All
92129D022H Gasket 2 231 All
92130D001H Pad, Scanning 404 All
92130D002H Sponge 214 All
92130D003H Cushion, Stopper 444 All
92130D004H Cushion, Pick-up 445 All
92142D001H Clutch, One Way 424 All
92143D001H Belt 203 All
A4DP3L000003 Lamp, Halogen (For DP-190) 1209 AU
A4DP7K000002 Lamp, Halogen (For DP-180) 1209 Except AU
CR2032 Battery 128 All
DZDA000047 LCD Module 127 All
DZDR000014 Speaker 631 All
DZDU000025 Handset 626 Except AK
DZDU000027 Handset 626 AK
DZEC101941 PC Board, SRU 1946 AU
DZEC102137 PC Board, FRM8 (For DP-180) 1934 Except AU
DZEC102525 PC Board, SRU 1946 AK
DZEC102526 PC Board, SRU 1946 AT
DZEC102527 PC Board, SRU 1946 YW
DZEC102566 PC Board, SRU 1946 YC
DZEC102932 PC Board, FXB (For UF-9000) 1903 AU
DZEC102978 PC Board, PNL1 1905 Except YV
DZEC102979 PC Board, PNL2 (For UF-9000) 1906 AU
DZEC102980 PC Board, PNL3 1907 All
DZEC102992 PC Board, PNL4 1908 All
DZEC102993 PC Board, PNL5 1909 All
Alphanumerical Parts ListPart Number Part Name Ref. No. Supplier PM Destination
176JUN 2004Ver. 2.0
![Page 177: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/177.jpg)
UF-9000
DP-180/190DZEC103051 PC Board, DC 1931 All
DZEC103111 PC Board, SC (For DP-190) 1901 AU
DZEC103128 PC Board, SC (For UF-9000) 1901 AU
DZEC103158 PC Board, PNL2 (For DP-180/190) 1906 All
DZEC103219 PC Board, FXB (For DP-180) 1903 Except AL, EB
DZEC103220 PC Board, FXB (For DP-190) 1903 AU
DZEC103331 PC Board, FXB (For DP-180) 1903 AL, EB
DZEC103454 PC Board, SC (For DP-180) 1901Except AU, AG, AV, YV
DZEC103455 PC Board, SC (For DP-180) 1901 AG
DZEC103456 PC Board, SC (For DP-180) 1901 AV
DZEC103460 PC Board, SC (For DP-180) 1901 YV
DZEC103469 PC Board, PNL1 1905 YV
DZFB000001 PTT Plug (For DP-180) 2020 EH
DZFB000010 PTT Plug (For DP-180) 2020 AL
DZFM000028 Cord, AC Power (For DP-180) 2009AG, AV, EH, EP, ER, YA, YC
DZFM000030 Cord, AC Power (For DP-180) 2009 EE
DZFM000031 Cord, AC Power (For DP-180) 2009 AL
DZFM000032 Cord, AC Power (For DP-180) 2009 AM
DZFM000043 Cord, AC Power (For DP-180) 2009 YV
DZFM000061 Cord, AC Power (For DP-180) 2009 YA
DZFM000064 Cord, AC Power (For DP-180) 2009 EB, ES
DZFM000065 Cord, AC Power (For DP-180) 2009 YV
DZFM000073 Cord, AC Power (For DP-180) 2009AG, AV, EH, EP, ER, YA, YC
DZFM000074 Cord, AC Power (For DP-180) 2009 EE
DZFM000076 Cord, AC Power (For DP-180) 2009 AM
DZFM000114 Cord, AC Power (For UF-9000/DP-190) 2009 AU
DZFN000016 Cable, Telephone Line (For DP-180) 2010 EP
DZFN000017 Cable, Telephone Line (For DP-180) 2010 AL
DZFN000030 Cable, Telephone Line (For DP-180) 2010 EH
DZFN000050 Cable, Telephone Line 2010AU, EB, EP, ER, ES, YA, YC, YV
DZFN000060 Cord, Handset 629 All
DZFN000069 Cable, Telephone Line (For DP-180) 2010 AG
DZFN000078 Cable, Telephone Line (For DP-180) 2010 EE
DZFN000082 Cord, Cradle 630 Except AK
DZFN000095 Cable, Telephone Line (For DP-180) 2010 AL, EB
DZFN000096 Cable, Telephone Line (For DP-180) 2010 AM
DZFN000104 Cable, Telephone Line (For DP-180) 2010 AM, AV, EH, ER
DZFN000105 PTT Plug (For DP-180) 2020 AV
DZFN000107 PTT Plug (For DP-180) 2020 ER
DZFN000108 PTT Plug (For DP-180) 2020 AM
DZFN000109 PTT Plug (For DP-180) 2020 ER
DZFN000115 Cord, Cradle 630 AK
DZFN000119 PTT Plug (For DP-180) 2020 ER
DZFN000120 Cable, Telephone Line (For DP-180) 2010 AL, EB
DZFP001548 Harness, PNL2-PNL3_5PIN 1943 All
DZFP001554 Harness, Power Supply 1930 All
DZFP001555 Cable, ECB (Flat Harness) 1929 All
DZFP001556 Harness, FXB 1927 All
DZFP001558 Harness, Speaker 1928 All
DZFP001561 Harness, PNL1-PNL2_17PIN 1939 All
Alphanumerical Parts ListPart Number Part Name Ref. No. Supplier PM Destination
177JUN 2004Ver. 2.0
![Page 178: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/178.jpg)
UF-9000
DP-180/190DZFP001562 Harness, PNL1-PNL2_14PIN 1940 All
DZFP001563 Harness, PNL1-PNL3_18PIN 1941 All
DZFP001564 Harness, PNL1-PNL3_10PIN 1942 All
DZFP001565 Harness, HD 1932 All
DZFP001566 Harness, DC 1933 All
DZFP001567 Harness, MC 1950 All
DZFP001574 Harness, Book-PNL 1948 All
DZHP009971 Software CD For (UF-9000/DP-190) 2102 AU
DZHP009973 Software CD (UF-9000/DP-190) 2201 AU
DZHP010343 Software CD (For DP-180) 2201 Except AU
DZHP010345 Software CD (For DP-180) 2102 Except AU
DZHT000004 Stamp Head 553 Except AU
DZHT000027 Stamp Head 553 AU
DZJC000389 Bracket, HDD 707 All
DZJC000390 Bracket, Counter 710 All
DZJE000738 Cradle, Upper 627 AU
DZJE000740 Cradle, Lower 628 AU
DZJF000462 Guide, Flash Memory Card 704 All
DZJH000084 Support, Locking (For DP-180) 708 Except AU
DZJK000004 Clamp 2405 All
DZJK000057 Edge Saddle 2403 All
DZJK000067 Clamp 2404 All
DZJK000068 Clamp 825 All
DZJK000069 Clamp 714 All
DZKB000637 Key, Print 112 All
DZKB000640 Key, B 109 All
DZKB000641 Key, Reset 106 All
DZKB000760 Key, Function 107 All
DZKB000762 Key, Stop 105 All
DZKB000796 Key, Start 104 All
DZKB000803 Key, Touch3 113 All
DZKB000858 Key, Scan/File 111 All
DZKB000862 Key, Copy 110 All
DZKB000922 Key, A 108 All
DZMA000260 Cradle, Upper 627 Except AU
DZMA000269 Cradle, Lower 628 Except AU
DZMA003267 Cover, Flash Memory Card 621 All
DZNK005395 Label, Laser Caution 632 All
DZRB000143 Carton Box 2101 All
DZRB000733 Carton Box 2401 All
DZRB000750 Cushion 2402 All
DZRG000003 Joint 2017 All
DZSM000756Installation Instructions (Expansion F-ROM Board, For DP-180)
2104 Except AU
DZSM000795 Installation Instructions 2103 All
DZSM000796 Installation Instructions 2202 All
DZSM000797 Installation Instructions 2406 All
DZTK000002 Counter, Mechanical 711 All
DZZSP29011 Screw W2 All
FFPTE2650 Label, Energy Star 635 All
J0KF00000015 Ferrite Core 1115 All
J0KF00000046 Ferrite Core 1115 All
K5AT281613 Core 1116 OAPD All
Alphanumerical Parts ListPart Number Part Name Ref. No. Supplier PM Destination
178JUN 2004Ver. 2.0
![Page 179: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/179.jpg)
UF-9000
DP-180/190L2AA00000088 Thermistor 1229 All
L2AA00000090 Thermostat 1204 All
L6CCKGEK0003 Motor 907 OAPD All
L6FALEGK0009 Motor, Fan 1006 OAPD All
L9DAEJ000001 Lamp, Halogen (For UF-9000) 1209 OAPD AU
N0GG4E000002 HVPS 1005 OAPD All
N3CABRD00005 HDD Unit 706 All
PJBAB0011Z Hook 606 OAPD All
PJBAB0020Z Holder, LCD 122 All
PJBCB0016Z Key, Contrast 116 All
PJBCB0017Z Key, Fax/Email 114 All
PJBCB0018Z Key, Zoom 117 All
PJBCB0019X Key, 1 (For DP-180) 118 AV
PJBCB0019Y Key, 1 (For DP-180/190) 118 Except AV
PJBCB0019Z Key, 1 (For UF-9000) 118 AU
PJBCB0020W Key, 2 119 AV
PJBCB0020X Key, 2 (For DP-180) 119 AG
PJBCB0020Y Key, 2 (For DP-180/190) 119 Except AG, AV
PJBCB0020Z Key, 2 (For UF-9000) 119 AU
PJBCB0021Z Key, 3 120 All
PJBCB0022Z Key, Ten 115 All
PJBCB0023Z Key, C (For DP-180/190) 130 All
PJDFB0008Z Shaft, Roller 613 OAPD All
PJDFB0009Z Shaft, A/D Roller 1404 OAPD All
PJDFB0025Z Shaft, Pickup Roller 1712 OAPD All
PJDFB0122Z Shaft, Fuser Drive 1201 OAPD All
PJDFB0163Z Shaft, Pickup Roller 1311 OAPD All
PJDG50133Z Gear, Pinion 1613 OAPD All
PJDGB0021Z Gear, Heat Roller 1208 OAPD All
PJDGB0023Z Gear, Z24 Fuser 1202 OAPD All
PJDGB0024Z Gear, Z21 Fuser 1102 OAPD All
PJDGB0025Z Gear, Internal 1104 OAPD All
PJDGB0026Z Gear, Z36 Upper Exit Roller Drive 1103 OAPD All
PJDGB0027Z Gear, Black Ratchet 1105 OAPD All
PJDGB0028Z Gear, Ratchet 806 OAPD All
PJDGB0029Z Gear, Planetary 809 OAPD All
PJDGB0030Z Gear, A/D Unit Union 1411 OAPD All
PJDGB0038Z Gear, Registration Roller 1304 OAPD All
PJDGB0039Z Gear, Paper Feed Roller 1307 OAPD All
PJDGB0040Z Gear, Pickup Internal 1301 OAPD All
PJDGB0041Z Gear, Pickup Arm 1302 OAPD All
PJDGB0042Z Gear, Registration Internal 808 OAPD All
PJDGB0043Z Gear, Registration Arm 807 OAPD All
PJDGB0047Z Gear, OPC B 901 OAPD All
PJDGB0048Z Gear, OPC A 902 OAPD All
PJDGB0049Z Gear, Fuser 903 OAPD All
PJDGB0051Z Gear, Fuser Drive 812 OAPD All
PJDGB0052Z Gear, ADU Drive 801 OAPD All
PJDGB0056Z Gear, Registration A 904 OAPD All
PJDGB0057Z Gear, Transfer 1505 OAPD All
PJDGB0058Z Gear 1 1717 OAPD All
PJDGB0059Z Gear 2 1718 OAPD All
PJDGB0060Z Gear 3 1719 OAPD All
Alphanumerical Parts ListPart Number Part Name Ref. No. Supplier PM Destination
179JUN 2004Ver. 2.0
![Page 180: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/180.jpg)
UF-9000
DP-180/190PJDGB0061Z Gear 4 1720 OAPD All
PJDGB0069Z Gear, Registration B 905 OAPD All
PJDGB0070Z Gear, Registration Drive 802 OAPD All
PJDGB0071Z Gear, Double Teeth 804 OAPD All
PJDGB0072Z Gear, Idle Z19 803 OAPD All
PJDGB0073Z Gear, Idle Z14 805 OAPD All
PJDGB0203Z Gear, Upper Exit Roller Drive 1106 OAPD All
PJDGB0204Z Gear, Intermediate Fuser 814 OAPD All
PJDJ05011CZ Bearing, C5 1410 OAPD All
PJDJ05041RZ Bearing, R5 1306 OAPD All
PJDJ06061CZ Bearing 1714 OAPD All
PJDJ06121RZ Bearing 1715 OAPD All
PJDJB0008Z Bushing, Left Heat Roller 1206 OAPD All
PJDJB0009Z Bushing, Right Heat Roller 1207 OAPD All
PJDJB0010Z Bushing, Pressure Roller 1214 OAPD All
PJDJB0019Z Bushing 1309 OAPD All
PJDJB0020Z Bearing, U 1506 OAPD All
PJDPB0001Z Solenoid, Upper Exit Roller with Plunger 1110 OAPD All
PJDRA0051Z Roller, Pinch 1705 OAPD All
PJDRB0014Z Shaft, ADU Registration Roller 1409 OAPD All
PJDRB0017Z Roller, Pinch 610 OAPD All
PJDRB0018Z Roller, ADU Pinch 1403 OAPD All
PJDRB0021Z Roller, Registration 1303 OAPD All
PJDRB0022Z Roller, Paper Feed 1305 OAPD All
PJDRB0025Z Roller, Paper Feed 1716 OAPD All
PJDRB0059Z Roller, Sub 1009 OAPD All
PJDRB0081Z Roller, Bias Transfer 1503 OAPD PM All
PJDRB0091Z Roller, Heat 1205 OAPD All
PJDRB0092Z Roller, Pressure 1216 OAPD All
PJDRB0093Z Roller, Cleaning 611 OAPD All
PJDSB0008Z Spring, Right OPC 1512 OAPD All
PJDSB0009Y Spring, OPC 1003 OAPD All
PJDSB0010Z Spring, Right Registration 1514 OAPD All
PJDSB0015Z Spring, Paper Jam Sensor Lever 1213 OAPD All
PJDSB0016Z Spring, Ratchet 1107 OAPD All
PJDSB0017Z Spring 1412 OAPD All
PJDSB0018Z Spring, Pinch Roller A 1217 OAPD All
PJDSB0019Z Spring 1010 OAPD All
PJDSB0020Z Spring, Stopper 1607 OAPD All
PJDSB0024Z Spring, Paper Tray Guide 1515 OAPD All
PJDSB0026Z Spring, Left OPC 1511 OAPD All
PJDSB0033Z Spring, Grid 1001 OAPD All
PJDSB0034Z Spring, Pinch Roller 608 OAPD All
PJDSB0035Z Spring, Registration 1417 OAPD All
PJDSB0039Z Spring, Gear Tension 813 OAPD All
PJDSB0040Z Spring, Transfer 1502 OAPD All
PJDSB0041Z Spring, Pinch Roller 1405 OAPD All
PJDSB0043Z Spring, Left Registration 1513 OAPD All
PJDSB0112Z Spring 614 OAPD All
PJDSB0145Z Spring, Cleaning Roller 609 OAPD All
PJDSB0148Z Spring, Charge 1002 OAPD All
PJDSB0149Z Spring, Developer 1004 OAPD All
PJDSB0157Y Spring Friction 1807 OAPD All
Alphanumerical Parts ListPart Number Part Name Ref. No. Supplier PM Destination
180JUN 2004Ver. 2.0
![Page 181: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/181.jpg)
UF-9000
DP-180/190PJDSB0179Z Spring, Retard Pad 1603 OAPD All
PJDSB0190Z Spring, Retard Pad 1805 OAPD All
PJDSB0205Z Spring, Pressure Roller 1215 OAPD All
PJDSB0206Z Spring, Separator 1223 OAPD All
PJDSB0207Z Spring, Pickup Holder 1312 OAPD All
PJDSB0208Z Spring, Dust Scraper 1314 OAPD All
PJDSB0210Y Spring, Friction 1606 OAPD All
PJDSB0211Z Spring, Pickup 815 OAPD All
PJGEC0002Z Sheet, Paper Tray A (For UF-9000/DP-190) 1617 AU
PJGEC0003Z Sheet, Paper Tray B (For UF-9000/DP-190) 1618 AU
PJGEC0004Z Sheet, Paper Tray F (For UF-9000/DP-190) 1814 AU
PJGEC0005Z Sheet, Paper Tray G (For UF-9000/DP-190) 1815 AU
PJGEC0006Z Sheet, Paper Tray C (For UF-9000/DP-190) 1619 AU
PJGEC0007Z Sheet, Paper Tray D (For UF-9000/DP-190) 1620 AU
PJGEC0008Z Sheet, Paper Tray E (For UF-9000/DP-190) 1621 AU
PJGEC0009Z Sheet, Paper Tray H (For UF-9000/DP-190) 1816 AU
PJGEC0010Z Sheet, Paper Tray I (For UF-9000/DP-190) 1817 AU
PJGFC0011Z Label, Max. Level Indicator 1 1622 All
PJGFC0012Z Label, Max. Level Indicator 2 1818 All
PJGKB0087Z LCD Window (For UF-9000) 124 AU
PJGKB0088U Sheet, Panel 1 (For DP-180) 125Except AU, AG, AV, YV
PJGKB0088W Sheet, Panel 1 (For DP-180) 125 YV
PJGKB0088X Sheet, Panel 1 (For DP-180) 125 AV
PJGKB0088Y Sheet, Panel 1 (For DP-180) 125 AG
PJGKB0088Z Sheet, Panel 1 (For UF-9000/DP-190) 125 AU
PJGKB0089V Sheet, Panel 2 (For DP-180) 126 YV
PJGKB0089W Sheet, Panel 2 (For DP-180) 126 AV
PJGKB0089X Sheet, Panel 2 (For DP-180) 126 AG
PJGKB0089Y Sheet, Panel 2 (For DP-180/190) 126Except AG, AV, YV
PJGKB0089Z Sheet, Panel 2 (For UF-9000) 126 AU
PJGKB0107V LCD Window (For DP-180) 124 YV
PJGKB0107W LCD Window (For DP-180) 124 AV
PJGKB0107X LCD Window (For DP-180) 124 AG
PJGKB0107Y LCD Window (For DP-190) 124 AU
PJGKB0107Z LCD Window (For DP-180) 124Except AU, AG, AV, YV
PJGPB0011W Cover, Panel (For DP-180) 103 YV
PJGPB0011X Cover, Panel (For DP-180) 103 AV
PJGPB0011Y Cover, Panel (For DP-180) 103 AG
PJGPB0011Z Cover, Panel (For DP-180) 103Except AG, AV, YV
PJHE5065Z Screw 1022 OAPD All
PJHG351Z Plate, Rubber 1727 OAPD All
PJHGC0004Z Rubber, Separation Pad 1819 All
PJHGC0005Z Rubber, Paper Size Knob 1821 All
PJHR9224Z Separator 1225 OAPD All
PJHRA0316Z Guard, Edge 817 OAPD All
PJHRB0029Y Assembly, Paper Tray Base 1609 OAPD All
PJHRB0030Z Tray, Paper Tray Extension 1610 OAPD All
PJHRB0031Z Guide, Right Paper Side 1604 OAPD All
PJHRB0032Z Guide, Left Paper Side 1605 OAPD All
PJHRB0033Z Knob, Paper Size 1611 OAPD All
Alphanumerical Parts ListPart Number Part Name Ref. No. Supplier PM Destination
181JUN 2004Ver. 2.0
![Page 182: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/182.jpg)
UF-9000
DP-180/190PJHRB0034Z Stopper 1608 OAPD All
PJHRB0036Z Rack 1614 OAPD All
PJHRB0037Z Arm, Right Pressure 1508 OAPD All
PJHRB0038Z Arm, Left Pressure 1507 OAPD All
PJHRB0045Z Rack, Guide 604 OAPD All
PJHRB0046Z Gear, Paper Guide Pinion 605 OAPD All
PJHRB0070Z Wheel, Drive 1308 OAPD All
PJHRB0075Z Lever, Registration Sensor 1415 OAPD All
PJHRB0076Z Lever, Paper Detect Sensor 1416 OAPD All
PJHRB0078Z Bushing 1504 OAPD All
PJHRB0079Z Arm, Sensor 1722 OAPD All
PJHRB0080Z Guide, Right Front 1709 OAPD All
PJHRB0081Z Guide, Right Rear 1710 OAPD All
PJHRB0082Z Guide, Left Front 1707 OAPD All
PJHRB0083Z Guide, Left Rear 1708 OAPD All
PJHRB0307Z Indicator, Orange Paper Level 1612 OAPD All
PJHRB0320Z Lever, No Paper Sensor 1414 OAPD All
PJHRB0324Z Holder, Transfer Roller 1501 OAPD All
PJHRB0327Z Clamp 824 OAPD All
PJHRB0338Z Base, Paper Tray 1801 OAPD All
PJHRB0339Z Case, Paper Tray Extension 1804 OAPD All
PJHRB0340Z Guide, Right Paper Side 1802 OAPD All
PJHRB0341Z Guide, Left Paper Side 1803 OAPD All
PJHRB0343Z Cover, Lifter 1810 OAPD All
PJHRB0344Z Indicator, Orange Paper Level 1806 OAPD All
PJHRB0445Z Rib, Paper Chute 1713 OAPD All
PJHRB0447Z Guide, Paper (For DP-180) 1811 OAPD Except AU
PJHRB0476Z Adapter, Retard 1616 OAPD All
PJHRB0521Z Bushing 1729 OAPD All
PJHRB0567Z Support, Right Paper 602 All
PJHRB0568Z Support, Left Paper 603 All
PJHRB0635Z Holder, Heat Roller 1221 OAPD All
PJHRB0636Z Base, Fuser Unit 1212 OAPD All
PJHRB0637Z Lever, Paper Jam Sensor 1220 OAPD All
PJHRB0638Z Cover, Left Fuser 1224 OAPD All
PJHRB0640Z Adapter, Pickup Holder 1313 OAPD All
PJHRB0659Y Guide, Exit Paper 1019 All
PJHRB0684Z Sheet, Bracket 1739 All
PJHRB0701Z Cushion, Leg 2305 All
PJHRC0051Z Sheet, Separation Pad 1623 All
PJHRC0216Z Sheet, 2nd Separation Pad 1820 All
PJHRC0055Z Sheet, Paper Chute 1740 All
PJHRC0056Z Sheet, Paper Size Knob 1822 All
PJHRC0154Z Sheet, Clutch Guide 1742 All
PJHRC0176Z Plate, Spacer 1741 All
PJHSB0007Z Pad, Friction 1602 OAPD All
PJHXB0019Z Sheet, Insulated 123 All
PJHXC0001Z Sheet, Protect 129 All
PJJEC04002Z Harness, Exit Sensor (Flat Harness) 1918 OAPD All
PJJEC05002ZHarness, Registration Detect Sensor (Flat Harness)
1919 OAPD All
PJJEC10003Y Harness, HVPS (Flat Harness) 1917 OAPD All
PJJRB1025Y Cable, Fuser 1219 OAPD All
Alphanumerical Parts ListPart Number Part Name Ref. No. Supplier PM Destination
182JUN 2004Ver. 2.0
![Page 183: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/183.jpg)
UF-9000
DP-180/190PJJRB1026Z Harness, Exit Solenoid Relay 1951 All
PJJRB1027Z Harness, LVPS 1915 All
PJJRB1028Z Harness, Termistor Relay 1952 All
PJJRML0011Z Harness, Low Toner Sensor 1916 OAPD All
PJJRML0014Z Harness, 2nd Paper Feed Module I/F Board 1921 OAPD All
PJJRML0015Z Harness, No Paper Sensor 1920 OAPD All
PJJRML0019Z Harness, LSU 1913 OAPD All
PJJRML0020Z Harness, Motor 1914 OAPD All
PJJRML0021Y Harness, Main Motor 1953 OAPD All
PJJTC0002Z Cable, Ground 826 All
PJJTCC014Z Cable 1413 OAPD All
PJKEB0019Z Cover, Front 1701 OAPD All
PJKEB0081X Cover, Front (For DP-180) 601 Except AU
PJKEB0081Y Cover, Front (For DP-190) 601 AU
PJKEB0081Z Cover, Front (For UF-9000) 601 AU
PJKEB0097Z Cover, Right 1702 All
PJKEB0098Z Cover, Left 1703 All
PJKEB0110Z Cover, Right Side 615 All
PJKEB0111Z Cover, Left Side 616 All
PJKEB0112Z Cover, Rear 617 All
PJKEB0113Z Cover, Top 623 All
PJKEB0114Z Tray, Sub Paper 624 All
PJKEB0115Z Base, Panel 101 All
PJKEB0116Z Cover , Right Leg 618 All
PJKEB0117Z Cover, Left Leg 619 All
PJKEB0118Z Cover, PCB 620 All
PJKEB0120Z Lamp, Doing 121 All
PJKEB0130Z Cover, Rear Paper Tray 625 All
PJKKB0001Z Holder, Battery 102 All
PJMCB0068Z Plate, Ground 2 1517 OAPD All
PJMCB0070Z Plate, Ground 1 1516 OAPD All
PJMDB0018Z Plate, Lead Wire 1203 OAPD All
PJMDB0019Y Ground, Fuser 1218 OAPD All
PJMDB0020Z Plate, ADU Pinch Roller 1402 OAPD All
PJMDB0026Y Lifter, Paper 1601 OAPD All
PJMDB0035Y Paper Chute 1731 OAPD All
PJMDB0036Y Frame, Chassis 1726 OAPD All
PJMDB0037Z Bracket, Gear 1721 OAPD All
PJMDB0155Y Lifter, Paper 1809 OAPD All
PJMDB0156Z Clamp 713 OAPD All
PJMDB0190Z Plate, Corner 1728 OAPD All
PJMDB0253Z Plate, Separator 1222 OAPD All
PJMDB0256Z Bracket, Joint 1738 All
PJMDB0257Y Plate, Lead Wire 1210 OAPD All
PJMDB0258Z Stay, Rear 1014 All
PJMDB0259Z Base, Right Side 819 All
PJMDB0260Z Base, Left Side 1015 All
PJMDB0261Z Bracket, Right Side 820 All
PJMDB0262Z Bracket, Left Side 1016 All
PJMDB0263Z Bracket Left Rear 1017 All
PJMDB0264Z Bracket, Right Rear 1018 All
PJMDB0286Z Base, Rear PC Board 703 All
PJMDB0287Z Base, SC 702 All
Alphanumerical Parts ListPart Number Part Name Ref. No. Supplier PM Destination
183JUN 2004Ver. 2.0
![Page 184: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/184.jpg)
UF-9000
DP-180/190PJMDB0288Z Cover, SC 701 All
PJMDB0289Z Bracket, Side Cover B 1012 All
PJMDB0290Z Bracket, Left Side Cover 1013 All
PJMDB0291Z Bracket, Side Cover A 1011 All
PJMDB0292Z Bracket, Right Side Cover 818 All
PJMDB0316Z Plate, Cover 634 All
PJNAC0003Z Screw W7 All
PJNEB0003Y Screw U7 OAPD All
PJNEB0008Z Screw 1007 OAPD All
PJNW317Z Poly Slider 1406 OAPD All
PJNW410Z Washer 1407 OAPD All
PJNW4111Z Washer, Plastic 810 OAPD All
PJNW525Z Spacer 811 OAPD All
PJNW620Z Washer 906 OAPD All
PJNW721Z Poly Slider 1108 OAPD All
PJNW820Z Washer, Plastic 1317 OAPD All
PJPEB0045Z Box, Accessories 2016 All
PJPGB0230Y Carton Box (For DP-180) 2301 Except AU, YV
PJPGB0230Z Carton Box 2301 AU, YV
PJPGB0254W Carton Box (For DP-180) 2001 YV
PJPGB0254X Carton Box (For DP-180) 2001 Except AU, YV
PJPGB0254Y Carton Box (For DP-190) 2001 AU
PJPGB0254Z Carton Box (For UF-9000) 2001 AU
PJPGB0255Z Carton, Bottom 2002 All
PJPGB0256Z Pad, Bottom 2003 All
PJPNB0082Z Cushion, Inner 2304 OAPD All
PJPNB0154Z Cushion, Front 2302 All
PJPNB0155Z Cushion, Rear 2303 All
PJPNB0176Z Cushion, Top 2006 All
PJPNB0186Z Cushion, Bottom 2004 All
PJPNB0187Z Cushion, Rear 2005 All
PJQHB0015Z Installation Instructions 2014 All
PJQMB0132Z Installation Instructions 2306 All
PJQMB0137ZOperating Instructions (For Copy & Network Scan Functions, For UF-9000)
2011 AU
PJQMB0138ZOperating Instructions (For Facsimile and Internet Fax/Email, For UF-9000)
2012 AU
PJQMC0029ZOperating Instructions (For Copy Arabic, For DP-180)
2021 ES
PJQMC0034ZOperating Instructions (For Copy Chinese, For DP-180)
2021 YV
PJQMC0052ZOperating Instructions (For Fax Chinese, For DP-180)
2022 YV
PJQQC0004Z Quick Guide (For DP-180) 2018 YA
PJQQC0005Z Quick Guide (For DP-180)2018
AG, AL, AM, AV, EB, EE, EH, EP
PJQQC0006Z Quick Guide (For DP-180) 2018 ER
PJQQC0007Z Quick Guide (For DP-180) 2018 YC
PJQTB0262Z Directory Holder (For UF-9000) 2015 AU
PJQTB0263Z Sheet, HVPS Insulation 1020 All
PJQTB0264Z Sheet, Right Cover 622 All
PJQTB0265U Label, F (For DP-180) 448 YV
PJQTB0265V Label, F (For DP-180) 448 EE
PJQTB0265W Label, F (For DP-180) 448 AV
Alphanumerical Parts ListPart Number Part Name Ref. No. Supplier PM Destination
184JUN 2004Ver. 2.0
![Page 185: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/185.jpg)
UF-9000
DP-180/190PJQTB0265X Label, F (For DP-180) 448 AG
PJQTB0265Y Label, F (For DP-180/190) 448Except AG, AV, EE, YV
PJQTB0265Z Label, F (For UF-9000) 448 AU
PJQTB0292Z Label, Color 446 All
PJQTC0003Z Label, Flash Memory 633 All
PJQTC0027Z Directory Holder (For DP-180/190) 2015 All
PJRAC0001Z Sheet, FM 712 All
PJUAB0005Y Plate, ADU Registration Roller 1408 OAPD All
PJUAB0007Z Chassis, Right 1724 OAPD All
PJUAB0008Z Chassis, Left 1725 OAPD All
PJUAB0024Y Plate, Lower Base 1401 OAPD All
PJULC0022Z Bracket, R 1737 All
PJULC0023Z Bracket, L 1736 All
PJUSB0008Z Plate, Transfer Bias Roller 1510 OAPD All
PJUSB0011Y Plate, Ground 1509 OAPD All
PJUSB0025Z Spring, Ground 816 OAPD All
PJUSB0027Z Plate, Pinch Roller 1704 OAPD All
PJUSB0080Z Spring, Ground 1711 OAPD All
PJUSB0089Z Spring, Side Guide 1808 OAPD All
PJUSB0130Z Plate, Spring 705 All
PJWACC00001 Software CD (For UF-9000) 2013 AU
PJWACC00002Operating Instructions CD (For DP-180/190)
2019 All
PJWACC00003 Software CD (For DP-190) 2013 AU
PJWACC00005 Software CD (For DP-180) 2013 Except AU, YV
PJWACC00007 Software CD (For DP-180) 2013 YV
PJWC1P7105M Assembly, Engine Board Shield Base 709 OAPD All
PJWEP7305M LSU 1114 OAPD All
PJWLPMF3M Cable, I/F 1949 OAPD All
PJWMP7100M Assembly, Registration Solenoid 822 OAPD All
PJWMP7305M Assembly, Pickup Solenoid 1320 OAPD All
PJWMPMF3M Clutch 1734 OAPD All
PJWP2P7100M1 PC Board, Paper Exit/ADU Paper Jam Sensor 1937 OAPD All
PJWP2P7105M1 PC Board, No Paper Sensor 1947 OAPD All
PJWP2P7305MPC Board, Registration/Paper Detect Sensor
1938 OAPD All
PJWP3P7100M1 PC Board, Low Toner Sensor 1944 OAPD All
PJWP3P7105M1 PC Board, 2nd Paper Feed Module I/F 1936 OAPD All
PJWPF2300EB Assembly, LVPS (DP-180) 1021 Except AU
PJWPPMF3M2 PC Board, 2nd Feeder 1945 OAPD All
PJWPUF9KEM PC Board, Engine Control 1902 All
PJWPWU00001Z Assembly, LVPS (For UF-9000/DP-190) 1021 AU
PJWQPMF3M Motor 1735 OAPD All
PJWS2P7100M Switch, OPC Drum Unit Interlock 1113 OAPD All
PJWSP7105M Switch, Front Door Safety Interlock 1112 OAPD All
PJYFPMF3M Assembly, Top Cover 1730 OAPD All
PJYK4P7305M Assembly, Pinch Roller Holder 607 OAPD All
PJYKF2300AU Door, Rear 612 All
PJZBP7305M Assembly, Upper Exit Roller Holder 1101 OAPD All
PJZC1P7100M Assembly, Upper Exit Roller Holder Cover 1109 OAPD All
PJZC1P7305M Assembly, Dust Scraper Cover 1315 OAPD All
PJZC2P7100M Bracket, Gear Support 821 OAPD All
Alphanumerical Parts ListPart Number Part Name Ref. No. Supplier PM Destination
185JUN 2004Ver. 2.0
![Page 186: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/186.jpg)
UF-9000
DP-180/190PJZC3P7100M Assembly, Side Fuser Cover 1226 OAPD All
PJZCP7305M Assembly, Paper Chute 1518 OAPD All
PJZE1P7100M Assembly, Pickup Lever 1319 OAPD All
PJZE1PMF3M Assembly, Paper Size Knob 1813 OAPD All
PJZEP7100M1 Pad, Separation 1615 OAPD PM All
PJZEP7305M Guide, Sub. Paper 1318 OAPD All
PJZEPMF3M1 Pad, Separation 1812 OAPD PM All
PJZFUS00001Z Assembly, Fuser Unit (For UF-9000) 1117 AU
PJZHP7100M Assembly, Drive Gear Bracket 908 OAPD All
PJZHP7105M Bracket, Fuser Drive Gear 823 OAPD All
PJZHP7305M Bracket, Motor 909 OAPD All
PJZR1P7305M Roller, Pickup 1316 OAPD PM All
PJZR2P7305M Assembly, Upper Exit Roller 1111 OAPD All
PJZR3P7100M Assembly, Lower Exit Roller 1227 OAPD All
PJZRP7305M Assembly, Cleaning Roller 1228 OAPD All
PJZRPMF3M Roller, Pickup 1733 OAPD PM All
PJZSF2300AU Assembly, Fuser Unit (For DP-190) 1117 AU
PJZSF2300EB Assembly, Fuser Unit (For DP-180) 1117 Except AU
PJZUP7100M Pan, Jam Release 1418 OAPD All
PJZUPMF3M Assembly, Paper Guide 1732 OAPD All
XPL2A10WVW Pin 1723 OAPD All
XSN2+10FN Screw W5 All
XSN3+4 Screw U9 All
XTB2+12J Screw W4 OAPD All
XTB3+4F Screw L9 All
XTB3+8G Screw F10 All
XTB3+8J Screw 19 All
XTB3+8JFN Screw V6 OAPD All
XTN3+8JFN Screw W8 All
XTS3+8J Screw W1 All
XTW26+8S Screw T8 OAPD All
XTW3+12S Screw U4 OAPD All
XTW3+12SFZ Screw U5 OAPD All
XTW3+6L Screw U1 All
XTW3+6LFC Screw V5 All
XTW3+6LFN Screw V9 All
XTW3+6S Screw V2 All
XTW3+8L Screw P3 All
XTW3+8LFN Screw H8 All
XTW3+8P Screw P8 All
XTW3+8PFN Screw V7 All
XTW3+8S Screw T9 OAPD All
XTW3+U8S Screw U8 OAPD All
XTW4+16P Screw V8 All
XUC4VW-V E-Ring U6 OAPD All
XWC3B Washer, Star G8 All
XWE4 Washer V3 All
XYC3+FF6 Screw V1 OAPD All
XYC3+FF8C Screw U3 OAPD All
XYN3+F5 Screw 3F All
Alphanumerical Parts ListPart Number Part Name Ref. No. Supplier PM Destination
186JUN 2004Ver. 2.0
![Page 187: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/187.jpg)
UF-9000
DP-180/190memo
187JUN 2004Ver. 2.0
![Page 188: Panasonic UF-9000-DP-180-190_HB_Ver2.0_040628](https://reader034.vdocument.in/reader034/viewer/2022050908/563dbadc550346aa9aa8a90a/html5/thumbnails/188.jpg)
E