parts manual - briggs and strattonbriggsandstratton.co.jp/pdf/2691215-00_20171102.pdf · 1...

Parts ManualParts ManualParts ManualParts ManualMfg. No: 2691215-00EQ700X, Murray 21" Self Propelled Walk

Copyright © Briggs and Stratton. All Rights reserved 02-Nov-2017

Table Of ContentsTable Of ContentsTable Of ContentsTable Of Contents

Model ComponentsModel ComponentsModel ComponentsModel Components PagePagePagePageDeck Group (2691215). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Drive Group (2691215). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Engine & Blade Group (2691215). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Handles Group (2691215). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Torque Specification Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Not For

Reproduct io

n

Copyright © Briggs and Stratton. All Rights reserved 3 02-Nov-2017

Deck Group (2691215)Deck Group (2691215)Deck Group (2691215)Deck Group (2691215)Mfg. No: 2691215-00Note: Unless noted otherwise, use the standard torque specifications

Not For

Reproduct io

n


Deck Group (2691215)Deck Group (2691215)Deck Group (2691215)Deck Group (2691215)REF NOREF NOREF NOREF NO PART NOPART NOPART NOPART NO QTYQTYQTYQTY DESCRIPTIONDESCRIPTIONDESCRIPTIONDESCRIPTION

1 704691 1 DECK2 704787 11 SCREW, Hex Head3 703407 3 SCREW, 3/8-16 x 14 704766 1 FRONT COVER, Deck6 7091081SM 1 SCREW, 1/4-15 x 3/49 704760 1 COVER, Rear10 704759 1 COVER, Front12 704754 1 COVER, Rear13 703523 2 SCREW, 5/16-1414 704789 2 SCREW, 1/4-15 x 1-1/416 704690 1 SUPPORT, Handle, LH17 704689 1 SUPPORT, Handle, RH18 704796 1 BAG19 704801 1 FRAME20 704768 1 REAR FLAP21 704747 1 COVER, Gray22 704786 2 SCREW #10-16 x 3/423 704810 1 BAFFLE, Rear24 704714 1 ROD25 704735 2 TORSION SPRING, RH26 704734 2 TORSION SPRING, LH27 704745 1 INSERT, Front Cover28 704733 1 CABLE GUIDE

Not For

Reproduct io

n


Drive Group (2691215)Drive Group (2691215)Drive Group (2691215)Drive Group (2691215)Mfg. No: 2691215-00Note: Unless noted otherwise, use the standard torque specifications

Not For

Reproduct io

n


Drive Group (2691215)Drive Group (2691215)Drive Group (2691215)Drive Group (2691215)REF NOREF NOREF NOREF NO PART NOPART NOPART NOPART NO QTYQTYQTYQTY DESCRIPTIONDESCRIPTIONDESCRIPTIONDESCRIPTION

1 704819 1 AXLE, Front2 704818 1 AXLE, Rear3 7091081SM 4 SCREW, 1/4-15 x 3/44 5025394SM 4 NUT, FLANGE, 3/8-165 703714 2 SCREW, 1/4-20 x 1/26 703524 2 BUSHING, Lock7 704707 1 TUBE8 704780 1 KNOB, Red8 703648 1 KNOB, Black9 704805 2 WHEEL, Front10 704802 2 WHEEL, Drive11 703503 2 DUST COVER, Wheel12 704738 2 HUBCAP, Front13 704737 2 HUBCAP, Rear14 703469 2 BEARING ASSEMBLY15 703479 2 SCREW, Hex Washer Head, .159 x .4316 7900023SM 5 SCREW, 1/4-15 x 1-1/417 703516 1 SPRING18 703714 2 SCREW, 1/4-20 x 1/219 704694 1 BRACKET20 704702 1 BELT21 704542 1 SUPPORT22 704782 2 GEAR, 9 Tooth23 704814 1 COVER, Rear24 704816 1 TRANSMISSION25 704698 2 PULLEY HALF26 704783 1 NUT, LockNot F

or

Reproduct io

n


Engine & Blade Group (2691215)Engine & Blade Group (2691215)Engine & Blade Group (2691215)Engine & Blade Group (2691215)Mfg. No: 2691215-00Note: Unless noted otherwise, use the standard torque specifications

Not For

Reproduct io

n


Engine & Blade Group (2691215)Engine & Blade Group (2691215)Engine & Blade Group (2691215)Engine & Blade Group (2691215)REF NOREF NOREF NOREF NO PART NOPART NOPART NOPART NO QTYQTYQTYQTY DESCRIPTIONDESCRIPTIONDESCRIPTIONDESCRIPTION

1 100602-0173-H8 1 * ENGINE, Briggs & Stratton -(Engine Model: 100602-0173-H8)

2 704765 1 MULCH PLUG3 704785 1 SCREW Hex, 3/8-24 x 1-1/24 703520 1 SUPPORT, Blade Bell5 704793 1 BLADE ADAPTER6 704725 1 BLADE

Note* To verify your specific engine model, please reference the ID Tag located on your engine. See your local Briggs & Stratton distributor for parts and service.

Footnotes:Footnotes:Footnotes:Footnotes:

Not For

Not For

Not For

Not For

Reproduct io

n

Reproduct io

n

Reproduct io

n

Reproduct io

n


Handles Group (2691215)Handles Group (2691215)Handles Group (2691215)Handles Group (2691215)Mfg. No: 2691215-00Note: Unless noted otherwise, use the standard torque specifications

Not For

Reproduct io

n


Handles Group (2691215)Handles Group (2691215)Handles Group (2691215)Handles Group (2691215)REF NOREF NOREF NOREF NO PART NOPART NOPART NOPART NO QTYQTYQTYQTY DESCRIPTIONDESCRIPTIONDESCRIPTIONDESCRIPTION

1 703483 2 BOLT, 5/16-18 x 1 G52 703463 2 NUT, Flange, 1/4-203 67885GS 1 NUT, Nylock, M64 704774 2 CABLE CLIP5 703781 1 WASHER, A6.46 703522 2 SCREW, 1/4-207 704729 2 BOLT, Shoulder8 704695 1 BOLT, Eye9 704706 1 HANDLE, Upper10 704712 2 HANDLE, Lower11 704776 2 WING KNOB, 5/16-1812 704779 2 WING KNOB13 704715 1 BAIL, Control14 704718 1 BAIL, Drive15 704723 1 CABLE, Control16 704720 1 CABLE, Drive17 704778 1 GRIP

Not For

Reproduct io

n


in/lbsft/lbs

3

Torque Specification ChartFOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%)

PropertyClass

Class 8.8 Class 10.9 Class 12.9

Size OfHardware Nm. Nm. Nm. Nm.

M3 1.282.905.75

9.916.5

244883

132200275390530375995

1350183023603050

13.44 1.804.108.10

14233467

117185285390550745960

14001900258033104290

19.2 22.92 2.15M4 30.72 43.44 52.56 4.95M5 60.96 5.97 7.15

16.59.7

M6 7.3 10.3 12.1M7 12.1 16.9 19.9 27M8 17.7 25 29 40M10 35 50 59 81M12 61 86.2 103 140M14 101 136 162 220M16 147 210 250 340M18 202 287 346 470M20 290 405 486 660M22 390 559 656 890M24 497 708 840 1140M27 733 1032 1239 1680M30 995 1401 1681 2280M33 1349 1902 2278 3090M36 1740 2441

37982935 3980

M39 2249 3163

Torque Specification ChartFOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)

HardwareGrade

SAE Grade 2 SAE Grade 5 SAE Grade 8

Size Ofin/lbsft/lbs

in/lbsft/lbs

in/lbsft/lbs

in/lbs in/lbsHardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.

8-32 19 2.1 30 3.4 41 4.68-36 20 2.3 31 3.5 43 4.910-24 27 3.1 43 4.9 60 6.810-32 31 3.5 49 5.5 68 7.71/4-20 66 7.6 8 10.9 12 16.31/4-28 76 8.6 10 13.6 14 19.05/16-18 11 15.0 17 23.1 25 34.05/16-24 12 16.3 19 25.8 29 34.03/8-16 20 27.2 30 40.8 45 61.23/8-24 23 31.3 35 47.6 50 68.07/16-14 30 40.8 50 68.0 70 95.27/16-20 35 47.6 55 74.8 80 108.81/2-13 50 68.0 75 102.0 110 149.61/2-20 55 74.8 90 122.4 120 163.29/16-12 65 88.4 110 149.6 150 204.09/16-18 75 102.0 120 163.2 170 231.25/8-11 90 122.4 150 204.0 220 299.25/8-18 100 136 180 244.8 240 326.43/4-10 160 217.6 260 353.6 386 525.03/4-16 180 244.8 300 408.0 420 571.27/8-9 140 190.4 400 544.0 600 816.07/8-14 155 210.8 440 598.4 660 897.61-8 220 299.2 580 788.8 900 1,244.01-12 240 326.4 640 870.4 1,000 1,360.0

Hex Head Capscrew

Hex Nut

Lockwasher

Washer

Carriage Bolt

NOTES1. These torque values are to be used for all hardware

excluding: locknuts, self-tapping screws, thread formingscrews, sheet metal screws and socket head setscrews.

2. Recommended seating torque values for locknuts:a. for prevailing torque locknuts - use 65% of grade 5

torques.b. for flange whizlock nuts and screws - use 135% of

grade 5 torques.3. Unless otherwise noted on assembly drawings, all torque

values must meet this specification.

Hardware Identification & Torque Specifications

Common Hardware Types

NoMarks

The guides and ruler furnished below are designed tohelp you select the appropriate hardware.

8.8 10.9 12.9

Class 5.6

5.6

5150

13.44 1.285.88

26.4 2.5044.64 4.3

5.2 7.17.7 10.515 21

988 1340759 1030590 800435 590320 435217 295169 230126 171

89 12164 8842 5826 36

.56

ThreadDiameter (mm)

Screw, 1/2- 16 x 2

BodyDiameter

Diameter

InsideDiameter (in)

Nut, 1/2-160

1/4 3/41/2 211/4 3/41/2 1/4 3/41/2 1/4 3/41/2 4

90 10070 8050 6030 400 10 20

ThreadDiameter (mm)

Nut, M8 Screw, M8- 1.25 x 25

Distance between threads (mm)

BodyLength (in)

BodyLength (mm)

3/8” Bolt or NutWrench—9/16”




7/16” Bolt or NutWrench (Bolt)—5/8”Wrench (Nut)—11/16”

in/lbs

Threadsper inch

Threadsper inch

Body Length

Body

When a washer or nut is identified as 1/2” (M8), this is the Nominal size, meaning the inside diameter is 1/2 inch (8mm metric thread diameter); if a second number is presentit represents the threads per inch (distance between threads).

When bolt or capscrew is identified as 1/2 - 16 x 2” (M8 - 1.25 x 50),this means the Nominal size, or body diameter is 1/2 inch (8mmmetric thread diameter), the second number,16, represents the threads per inch, (distance between threads). The final numberis the body length of the bolt or screw, 2 inches (50mm).

Standard Hardware Sizing

M6 Bolt or NutWrench—10mm




M14 Bolt or NutWrench—22 mm

Wrench & Fastener Size Guide

parts manual - briggs and strattonbriggsandstratton.co.jp/pdf/2691215-00_20171102.pdf · 1...

Documents