GLOSSARYTermATTAFITTNBOXNCONNCYLNDISNCTONRTONSLCNSNONPYRNXTRPANEPAVEPFITPLOOSCTNSJOISNODVERT

DescriptionPIPE ATTACHMENT REQ'D FOR STRUCTURAL PENETRATIONS THRO DECKS/WALLS, ETCSTRUCTURAL FITTINGNEGATIVE BOXNEGATIVE CONENEGATIVE CYLINDER (BOLT HOLES ETC)NEGATIVE DISH (VESSEL/PIPE CAP)NEGATIVE TUBULAR RING (DOUGHNUT)NEGATIVE RING SEGMENT (RECTANGULAR X-SECTION)NEGATIVE CYLINDER (WITH DIAGONAL CUT)NEGATIVE CONE (WITH OFFSET CAPABILITY)NEGATIVE PYRAMIDNEGATIVE EXTRUSION/SHAPE (BOX/TRIANGULAR ETC)STRUCTURAL PLATE/GRATING SECTIONPPOINT OWNED BY PLOOPENETRATION THRO' DECK OR WALL PLATE (PIPE SLEEVE/ELECTRICAL TRANSIT, ETC)PLATE OWNED BY PANE HAS PLATE ATTRIBUTESSTRUCTURAL SECTION ie, HEA, UNP, ETCSNOD MEMBER USED IN CONNECTION SCTNNODE POINT USED IN CONNECTING SCTN STRUCTURAL SECTION ie HEA, UNP, ETC MEMBERSP POINTED OWNED BY NXTR

GENERAL PDMS QUERY COMMANDSCommand SyntaxQ ANGLEQ ATTQ BANGQ BOREQ CLLQ COL 4Q COL ACTQ COL AIDSQ COL CEQ COL VISQ CREFQ CUTLQ DER LENQ DESCQ DESPQ DIRQ DISPLAYQ DNSTQ DRINSTAQ DRNEQ DRNENDQ DRNSQ EQ ELEMQ FRADQ FUNCQ GCOFQ GTYPQ GWEIQ HQ HEIQ HHQ HPOSQ HTQ IDP @ WRT /DATUMQ IDP @ WRT/*Q IDPL @Q INREFQ ISPECQ ITLEQ JLINEQ JUSLQ JUSTQ LASTMODQ LEVQ LISTQ LOCKQ MATREFQ MCOUNTQ MCOUNT SCTNQ MDBQ MEMQ MEMLQ MIDPQ MTLE

Q MTLLQ MTOQ NAMQ NAMNQ NCOFQ NSRFQ NVOLQ NWEIQ OBSQ ORIQ OSRFQ OWNQ PAQ PARAQ PHQ PH BOREQ PH ODQ PI WRT/*Q PL WRT/*Q PLNAQ POSQ POS FITTQ POS IDPL @Q POS IN $V1Q POS PIN1 WRT/*Q POS POPLI NA PROP 0.5Q POS PPL1 BOS WRT/*Q POS WRT TO ID@Q POS1 WRT/*Q POSEQ POSPPLI NA PROP 0.5Q POSSQ POSS POSEQ POST FITTQ POST IN $V1Q PPLIN TOS START WRT/DATUMQ PRLSQ PTQ PT ODQ PURPQ RADQ RADQ REFQ REPRESQ SJUSQ SPREQ STEXTQ TCTLQ TCTLENQ TPOSQ TULEQ TYPEQ USERQ USERMQ USERMODQ VOL CEQ ZDIS

Q: DTYPEQ: STATUSQ:SWCODE

GENERAL PDMS QUERY COMMANDSDescriptionRETURNS THE CURRENT ELEMENT ANGLERETURNS THE CURRENT ELEMENT ATTRIBUTESRETURNS THE CURRENT ELEMENT BETA ANGLE (IF IT HAS ONE)RETURNS THE PIPE BORE SIZEGIVES THE PIPE BRANCH LENGTHGIVES THE ATTRIBUTED COLOUR (YELLOW)GIVES THE CURRENT ACTIVE COLOURGIVES THE CURRENT AID LINE COLOURGIVES THE CURRENT ATTRIBUTED COLOURGIVES THE CURRENT VISIBLE COLOURRETURNS THE CURRENT ELEMENT CONNECTION REFERENCE (IF IT HAS ONE)GIVES THE CE CUT LENGTHRETURNS THE CURRENT ELEMENT ACTUAL LENGTH (SCTNS, GEN SEC'S)RETURNS THE CURRENT ELEMENT DESCRIPTION (IF IT HAS ONE)RETURNS THE CURRENT ELEMENT DESIGN PARAMETERS (UNSET IF NONE SET)RETURNS THE DIRECTIONGIVES THE TOLERANCE & REPRES LEVELSGIVES THE CE DENSITYRETURNS THE DIRECTION OF THE CURRENT ELEMENTS CUT PLANE AT ITS STARTGIVES THE END CUT-PLANE DIRECTIONRETURNS THE DIRECTION OF THE CURRENT ELEMENTS CUT PLANE AT ITS ENDGIVES THE START CUT-PLANE DIRECTIONRETURNS THE CURRENT ELEMENT EAST CO-ORDINATERETURNS THE CURRENT ELEMENT NAMERETURNS THE RADIUS OF A PAVE BELOW PLOO BELOW PANERETURNS THE RADIUS OF A VERT BELW NXTR BELOW PANERETURNS THE CURRENT ELEMENT FUNCTIONGIVES THE CE GROSS C OF GRETURNS THE CURRENT ELEMENT GENERIC TYPE eg W OR HPGIVES THE CE GROSS WEIGHTGIVES THE CE HANDER HEAD CO-ORDSRETURNS THE HEIGHT AT PLOO LEVEL OF A PANE (PLATE THK)RETURNS THE CURRENT ELEMENT HANGER HEAD CO-ORDINATESGIVES THE CE PIPE HEAD CO-ORDINATESRETURNS THE CURRENT ELEMENT HANGER TAIL CO-ORDINATESGIVES THE COORD OF A POINTRETURNS A PICKED PPOINT CO-ORDINATES WITH RESPECT TO WORLDGIVES THE PLINE NAME USING CURSORRETURNS THE CURRENT ELEMENT INTERFERENCERETURNS THE CURRENT ELEMENT INSULATION SPECIFICATIONGIVES LENGTH OF IMPLIED TUBERETURNS THE CURRENT ELEMENT JOINT LINE PLINE SETTINGGIVES THE CE JUSTIFICATION LINERETURNS THE CURRENT ELEMENT JUSTIFICATION LINE PLINE SETTINGGIVES THE TIME AND DATE THE COMPONENT WAS LAST MODIFIEDRETURNS THE CURRENT ELEMENT DRAWING LEVELRETURNS THE CURRENT ELEMENT ALLOWABLE MEMBER TYPESRETURNS THE CURRENT ELEMENT LOCK STATUSRETURNS THE CURRENT ELEMENT MATERIAL REFERENCEGIVES THE NOS OF SUB MEMBERS IN CEGIVES THE NOS OF SCTN MEMBERS IN CERETURNS THE CURRENT MDB NAMERETURNS THE CURRENT ELEMENT MEMBER'S LISTRETURNS THE CURRENT ELEMENT MEMBER LINE PLINT SETTINGGIVES THE CE MIDPOINT CO-ORDINATESGIVES LENGTH OF MATERIAL TUBE

GIVES CL LENGTH OF MATERIAL TUBEGIVES THE CE MTO STATUSRETURNS THE CURRENT ELEMENT NAME WITH FORWARD SLASHRETURNS THE CURRENT ELEMENT NAME WITHOUT FORWARD SLASHGIVES THE CE NET C OF GGIVES THE CE NET SURFACEGIVES THE CE NET VOLUMEGIVES THE CE NET WEIGHTGIVES THE CE OBSTRUCTION LEVELGIVES THE CE ORIENTATION (SLOPE)GIVES THE SHEET OVERLAY (VIEW ONLY)GIVES THE CE OWNERGIVES TE C ARRIVE CO-ORDINATESGIVES THE CE PARAMETERS ie SERIAL SIZESGIVES THE CE PIPE HEAD ATTRIBUTESGIVES THE CE (PIPE HEAD) BOREGIVES THE CE (PIPE HEAD) DIAMETERGIVES THE CE (PIPE SUPPORT) LOCATIONGIVES THE CE HVAC LEAVE CO-ORDINATESGIVES THE PLINE NAMESGIVES THE CE CO-ORDINATES (START)GIVES THE C/FITT CO-ORDINATES (START)GIVES THE PLINE CO-ORD AT CE STARTGIVES THE CE DISTANCE TO VAR. $V1GIVES THE CE CO-ORDINATES OF PIN 1GIVES THE CENTRE CO-ORDINATE POSITIONS OF THE PLINE (PPLI) AT (0.5X DER LEN) ON THE N/AGIVES THE BOS PLINE CO-ORDINATESGIVES THE DIST FROM CE TO START OF IDENTIFIED MEMBERGIVES THE CE CO-ORDINATES OF PIN 1GIVES THE CE END CO-ORDINATESGIVES THE CENTRE CO-ORDINATE POSITIONS OF THE PLINE (PPLI) AT (0.5X DER LEN) ON THE N/AGIVES THE CE START CO-ORDINATESGIVES THE CE BOTH END CO-ORDINATESGIVES THE C/FITT CO-ORDINATES (START)GIVES THE CE DISTANCE TO VAR.$V1GIVES TOP OF STEEL OF UB/UCGIVES THE DESP NAME TYPESGIVES THE CE PIPE TAIL ATTRIBUTESGIVES THE CE (PIPE TAIL) DIAMETERGIVES THE STRU PURPOSE ATTRIBUTEGIVES THE CE RADIUSGIVES THE CE RADIUSGIVES THE CE PDMS REFERENCE NOGIVES THE CE REPRESENTATION STATUSGIVES THE PLOO JUSTIFICATION ie UTOP, DCEN, DBOTGIVES THE CE SPECIFICATION REFERENCEGIVES THE PENETRATION IDENT AT ATTAGIVES THE CE CUT LENGTHRETURNS THE CURRENT ELEMENT LENGTH REQUIRED TO MAKE THE SCTNGIVES THE CE PIPE TAIL CO-ORDSGIVES THE BRANCH TUBE LENGTHGIVES THE CE TYPE ie SCTN, PANEGIVES THE CE USER DATABASEGIVES CREATORS NAMEGIVES THE LAST USER LOGIN ID (STRU)GIVES THE CE VOLUMEGIVES THE CE FITTING DIST FROM START

GIVES THE FRMW STYLE TYPE (ie STLS)GIVES THE CE STRU STATUS ie 'AFC'GIVES THE CE WEIGHT CODE

PDMS TYPED COMMANDSCommand SyntaxADD ALL EQUIP WITHIN VOL CEADD ALL SCTN WITHIN VOL CEADD ALL STRU WI PURP EQ 'PS'ADD ALL WITHIN VOL CEADD ALL WITHIN VOL CE 100ADD CEADD CE COL 39ADD CREFADD SITEAID CLEAR LINE ALLAT @AT IDP@AT IDPL@AXES AT CEAXES AT PA CEAXES AT PPLI TOS PROP 1AXES OFFBY D100BY E100BY E2IN WRT CTBY E3.1/2.1INBY N100BY U100BY X100BY X100 WRT/*CALL STL GSCTNTAG OFFCALL STL GSCTNTAG CECHE CECOL 39 YELLOWCOL ACT BLUECOL ACT VIOLETDELETE CEDESCLASH CHECK CEDRNE PERPENHANCE CE COL YELLOWENHANCE CE TRANSL 0ENHANCE CE TRANSL 60EXT END -1000EXT END THR ID@EXT END THR IDPL@EXT END TO ID@EXT END TO IDP@EXT END TO IDPL@EXT STA -1000EXT STA THR IDP@FINISHFLIP CEGETWROKINCL CIRC 1 OF NOTE/TABLEINCL ID@INCL NAMELOCK ALLMAR CEMAR WI 'TEMPORARY' CEMARK CE

MOV E WRT CE TO ID@ (PDMS)MOV U TO IDP@ (PDMS)MOV W TO IDPL @ (PDMS)MOVE U THR ID@(PDMS)MOVE U WRT/* THR ID@(PDMS)MOVE W THR IDP@(PDMS)MOVE W THR IDPL@(PDMS)MOVES 45 E WRT WORLD DIST 2000MOVES S 45 E WRT WORLD S 2000NAME/TEMPORARYNEW FITT COPY PREV BY ZDIST PROP 1 BANG 180NEW GLAB COPY $V1NEW GLAB COPY PREV AT @NEW PANE COPY PREV BY E200 COL 4 (PDMS)NEW PANE COPY PREV MOV TOW ID@DIST 1000NEW PNAE COPY PREV BY E200 COL 4 (PDMS)NEW SCTN COPY MOVE W WRT/* THR IDPL@(PDMS)NEW SCTN COPY PREV BY E200NEW SCTN COPY PREV BY E200 (PDMS)NEW SCTN COPY PREV BY E200 COL 4 (PDMS)NEW SCTN COPY PREV BY E200 WRT CE (PDMS)NEW SCTN COPY PREV MIRRO PLA E THR E118000 N118000 U26000 WRT/*(PDMS)NEW STRU COPY PREV MOVE W WRTCE TO IDPL@ (PDMS)NEW SYMB COPY PREV BY X-10 (DRAFT)NEW TEXP COPY PREV BY Y10 (DRAFT)NEW VRTX COPY PREV BY X10 (DRAFT)PIN DIR D WRT/* THR IDPL@PIN1 AT PPLI BOS PROP .5PIN1 BY D8PIN1 DIR DPIN1 DIR U WRT/* THR IDP@PIN2 DIR U WRT/* THR IDPL@PIN6 OFFPIN6 OFFPKEY LTOCPOS PIN3 AT CEPREC 4 DPNEW STRU COPY $V1NEW TEE CHOO ALLCONNCONN AND P3 IS WORI AND P3 IS WBACKFORWDIR EDIR TO NEXCONN PT TO LAST MEMCONN PH TO FIRST MEMCONN PH TO PT OF ID BRAN @DIST 1000BY E300THRO N12300PLAN E THR E23400PLAN E DIST 1000BOP ONTOP ID SCTN @BOP 100 ONTOP ID SCTN @SEL HSTU

SAVEWORKGETWORKCHECK BRANCHECK PIPEFLIP CONNARR 3LEA 3ANG 0 CONNADD ALL WITHIN VOL CE 1000MA CERCODE RIGHTREFPRES HOLES ONREFRESHREM CERENAME / XXX / YYYREPRE PROF ON CL OFFREPRES DARC 1REPRES DARC DEFREPRES HOLES OFFREPRES HOLES ONREPRES OBSTRUCTION OFFREPRES PNODE COL YELLOWREPRES PNODE ONREPRES PNODE SIZE 6REPRES PROF ON CL OFFREPRES SNODE OFFROT ABO IDP@ BY 90ROT ABO IDPL@ BY 90ROT ABO P1 BY 90ROT ABO PPLIN TOS BY 15ROT THR IDP@ BY 90ROT THR IDPL@ BY 90ROT THR MIDP ABO D BY 90ROT THR POSE ABO D BY 30ROT THR POSS ABO D BY 45ROT THR W10000 N 20000 U30000 WRT/*ABO U BY 90ROT THRO MIDP ABO D BY 90ROT THRO POSS ABO D BY 45SAMSAVEWORKUNCLAIM ALLUNLOCK ALLUNM CEUNMAR CEWITHIN VOL CE 500 COL 4ZDIST (ZDIST + 100)

DescriptionADDS ALL EQUIPMENT THAT OVERLAPS CEADDS ALL SECTIONS THAT OVERLAP CEADDS ALL STRU WITH PURPOSE ATTRIBUTEADDS ALL DISCIPLINES THAT OVERLAP CEADDS ALL DISCIPLINES THAT OVERLAP CE WITH A VOLUME OF +100mmADDS CEADDS CE WITH COL 39(SEE COLOUR SHEET)ADDS CE PIPE CONNECTION REFADDS CE SITEREMOVES UNWANTED LINES FROM PDMSMOVES CE TO NEW CURSOR POSMOVES CE TO SELECT PPOINTMOVES CE TO SELECT PLINEPLACES CE AXESPLACES AXES AT PIPE ARRIVE POINTPLACES AXES AT THE END OF TOS PLINEREMOVES CE AXESMOVES CE DOWN 100mmMOVES CE EAST 100mmMOVES CE E2" (INCHES) WRT CE (DETERMINE CORRECT CE AXIS FIRST)MOVES CE EAST 3 1/2"MOVES CE NORTH 100mmMOVES CE UP 100mmMOVES CE X (EAST) 100mmMOVES CE X (EAST) 100mm WRT TO WORLDUNMARKS SCTNMARKS CE SCTN START & ENDGIVES CONSISTENCY CHECK ON CECHANGES LIN COL TO YELLOWCHANGES THE ACTIVE COLOUR TO BLUECHANGES THE CE COLOUR TO VIOLETDELETES THE CERUNS CLASH CHECK ON CE (TYPE EXIT TO CLEAR MACRO & RETURN TO DESIGN)CUTS THE SCTN END AT 90DEG TO SECTIONDISPLAYS CE AS YELLOWDISPLAYS CE AS A SOLIDDISPLAYS CE TO 60% TRANSLUCENCYEXTENS THE END -1000EXTENDS END TO JUSTIFICATION LINEEXTENDS END TO A SELECT PLINEEXTENDS THE END TO SELECTED ITEMEXTENDS THE END TO A SELECTED PPOINTEXTENDS THE END TO A SELECTED PLINESHORTENS THE START BY -1000EXTENDS START TO A SELECTED PPOINTENDS & SAVES PDMS SESSIONFLIPS CEGETS LATEST MODELREPOSITIONS CIRC 1 TO PREV SELECTED DESTINATIONGIVES THE CE CO-ORDINATES (START) OR ITEM TO BE TRANSFERREDREPOSITIONS CE TO A SELECTED DESTINATIONLOCK ALL ELEMENTS FROM THE CURRENTMARKS CE NAMETAGS CE WITH TEMPORARYMARKS CE NAME

MOVES CE WRT TO ITS OWN AXIS E TO A SELECTED ELEMENTMOVES UP TO A SELECTED ELEMENTMOVES WEST TO A SELECTED PLINEMOVES CE UP TO A SELECTED ELEMENTMOVES CE UP ONTO SELECTED ITEMS JUSTIFICATION LINEMOVES CE WEST TO A SELECTED PPOINTMOVES CE WEST TO A SELECT PLINEMOVES THE CE IN A S 45 E DIRECTION BY 2000 ALONG THAT DIRECTION (THE HYP LENGTH)MOVES THE CE IN A S 45 E DIRECTION BY SOUTH 2000 (NOT THE HYP LENGTH)RENAMES ITEM TEMPORARYCOPIES FITT AT END POSITION OF CE AT A BANGLE OF 180 START POSITION CE MIDDLE POSITION CE END POSITION CECOPIES GLAB AS VARIABLE $V1COPIES GLAB TO PICKED LOCATIONCOPIES CE E200 COL 4CREATES A NEW PANE AND MOVES IT TOWARDS A SELECTED ITEM RELATIVE TO BOTH ORIGINSCOPIES CE E 200 COL 4COPIES A NEW STRU AND MOVES IT WEST WRT TO CE AND TO A SELECTED PLINECREATES A COPY OF THE CURRENT PANE 200mm EAST OF ITS CURRENT LOCATIONCOPIES CE E200COPIES CE E200 COL 4COPIES E200 WRT CE AXISMIRROR COPIES CE ABOUT CO-ORDS ON A E DIRECTIONCOPIES A NEW STRU AND MOVES IT WEST WRT TO CE AND TO A SELECTED PLINCOPIES CE X-10COPIES CE Y10COPIES CE X10 (CLOUDS)MOVES PIN1 DOWN TO A SELECTED PLINEPOSITIONS PIN1 AT MID POINT ON BOS PLINEMOVES PIN1 DOWN 8mmPOSITIONS PIN 1 DIRECTION DOWNMOVES PIN1 UP TO A SELECTED PPOINTMOVES PIN2 DOWN TO A SELECTED PLINEREMOVES PIN6TURNS PIN6 OFFCHANGES DIM FROM EXIST JUSL TO LTOCPLACES A PIN3 AT POS OF CEGIVES PRECISE READOUT TO 4 DEC. POINTSCOPIES STRU FROM 1 SITE TO ANOTHERselect a new tee from the spec of the branch at the current boreconnect - orientate the current element and position arrive ppoint at leave ppoint of previous componentconnect and orientate the current element so that ppoint 3 is facing westorientate the current element so that ppoint 3 is facing west without changing its positionswith to backwards modelling modeswitch to forwards modelling modedirect the leave ppoint east (mainly used for elbows and bends)direct the leave ppoint towards the origin of the next component (mainly used for elbows and bends)connects the tail of the current branch to the last member of the branch (must be sat at branch level)connects the head to the first member of the branch (must be sat at branch level)connect the head of the current branch to the tail of a cursor identified branchslide the current element along from the previous component until the distance from p0 to p0 is 1000slide the current element along 300mm from its current position in the east directionslide the current element along from the previous component until the p0 reaches N12300slide the current element along in non-orthogonal plane from the previous component until the p0 reaches E23400slide the current element along in a non-orthogonal plane until the difference in eastings from the previous comp is 1000slide the current element (elbo) until the BOP rests on top of the identified SCTNslide the current element (elbo) until the BOP is 100mm above the top of the identified SCTNselect the tube for the start of the branch (if the branch is unconnected and starts with pipe)

save changes from current sessionreloads databases to see changes others have made since start of your sessionperforms data consistency check on current branchperforms data consistency check on current pipeflip the current element (so that the ppoint that was the arrive is now the leave) and reconnect itmake the p3 of current element (usually Tee) the arrive ppointmake the p3 of current element (usually Tee) the leave ppointset the angle to zero and connect to the previous item (used for items with different default angles)add all items to the view which are in the box that encloses the volume of the current element +1000mmmarks CE with its nameROTATES THE VIEW OF ORI TO THE RIGHTADDS HOLES REPRESENTATIONREFRESHES THE SCREENREMOVES THE CURRENT ELEMENT FROM THE DRAWLISTRENAMES CE TO YYYSETS PROFILE REPRE-TIN. AS SOLIDSET ARC TOLERANCE TO 1 mmSETS ARC TOLERANCE TO 10mm (DEFAULT)SAVES CHANGES CARRIED OUT AT THAT TIMEADDS HOLES REPRESENTATIONTURNS HOLES OFFPRIMARY NODS SHOWN YELLOWPRIMARY NODES SHOWN ONLYCHANGES PRIMARY NOTES TO 6mmSETS PROFILE REPR AS SOLIDSECONDARY NODES OFFROTATES CE LOCAL TO PPOINT BY 90 DEGROTATES CE LOCAL TO PLINE BY 90 DEGROTATES CE ABOUT P1 BY 90 DEGROTATES CE ABOUT PLINE TOS BY 15 DEGROTATES CE ABOUT ANY PPOINT BY 90 DEGROTATES CE ABOUT ANY PLINE BY 90 DEGROTATES CE ABOUT MIDP POS BY 90 DEGROTATES CE ABOUT END POS BY 30 DEGROTATES CE ABOUT START POS BY 45 DEGROTATES CE ABOUT CO-ORDS WRT TO WORLD ABOUT VERT AXIS BY 90 DEGROTATES CE ABOUT MIDP POS BY 90 DEGROTATES CE ABOUT START POS BY45 DEGLETS YOU TOGGLE BETWEEN LAST 2 ITEMSSAVES LATEST WORKUNLOCKS ALL CLAIMED MEMBERSUN-LOCKS ALL ELEMENTS FROM THE DRAWLISTUNMARKS CE NAMEREMOVES THE CURRENT ELEMENT FROM THE GRAPHICAL VIEWSET AT PS WITHIN A VOL OF +500 COL YELLOWMOVES ITEM 100 FROM ORIG POSITION

DRAFT QUERY COMMANDSCommand Syntax DescriptionQ ADEG GIVES THE C/VIEW ANGLE (ie 90 DEG)Q APOF GIVES THE CE (NOTE) TERMINATOR POS'NQ BSFT GIVES THE DRG. SHT. REF. (STRU LVL)Q CHEIGHT GIVES THE TEXT CHARACTER HEIGHTQ CPOF GIVES THE CE (NOTE) LEADER LINE POS'NQ DIR GIVES THE C/VIEW DIRECTION (ie N)Q DPOS GIVES THE LDIM POSITION ON SHEETQ DTER GIVES THE LAYER/LDIM TERM'TR DEFAULTQ FPT GIVES THE STRA FROM POINT CO-ORDSQ JUST GIVES THE C/VIEW JUSTIFICATION (ie LEFT)Q LEN GIVES THE STRA LENGTHQ LHEI GIVES THE TEST LETTER HEIGHTQ LSHAPE GIVE THE LABEL LEADER LINE STATUSQ LVIS GIVES THE CE VISIBILITYQ MPT GIVES THE STRA MID POINT CO-ORDSQ PKEY GIVES THE DIM PLINE STATUS (ie TCTF)Q POS PLRF GIVES THE CORRECT VSEC CO-ORDSQ RRSF GIVES THE CURRENT VIEW RULE SETTINGSQ SIZE GIVES THE VIEW O/ALL DIMENSIONSQ SNAP GIVES THE SNAP SETTINGS (ON/OFF)Q THPOS GIVES THE C/VIEW MATCHLINE CO-ORDSQ TMRF GIVES THE CE (SYMBOL) NAMEQ TPEN GIVES THE TEXP COLOUR ATTRIBUTESQ TPT GIVES THE STRA TAIL POINT CO-ORDSQ VLIMITS GIVES THE VIEW LIMITSQ VRAT GIVES SCALE RATIO (ie 1 TO 245)Q VSCALE GIVES THE C/VIEW SCALE (ie 0.5)Q VTYP GIVES THE VIEW ATT (ie GLOBAL HIDDEN)Q XYPOS GIVE THE VIEW POSITION ON SHEETQ ADEG GIVES THE C/VIEW ANGLE (ie 90 DEG)Q ATEX GIVES THE SLAB TEXT ATTRIBUTESQ BSRF GIVES THE ATTACHED DRG/SHT (DRWG LEVL)Q BTEX GIVES THE TEXT/GLAB ATTRIBUTESQ CHEI GIVES THE CHARACTER HEIGHTQ DDNAME GIVES THE DIMENSION OWNERS NAMEQ DIR GIVES THE C/VIEW ANGLE (ie N)Q DMTXT GIVES THE DIM TEXT ATTRIBUTESQ DPOS GIVES THE LDIM POSITION ON SHEETQ DTER GIVES THE LAYER/LDIM TERM'TR DEFAULTQ FPT GIVES THE STRA FROM POINT CO-ORDSQ LEN GIVES THE STRA LENGTHQ LHEI GIVES THE TEST LETTER HEIGHTQ LSHAPE GIVES THE LABEL LEADER LINE STATUSQ MPT GIVES THE STRA MID POINT CO-ORDSQ PKEY GIVES THE DIM PLINE STATUS (ie TCTF)Q PLTXT GIVES THE PROJ TEST ATTRIBUTESQ POS PLRF GIVES TE CURRENT VSEC CO-ORDSQ POST PLRF GIVES THE CURRENT VSEC CO-ORDSQ RCOD GIVES THE VIEW ORIENTATIONQ RRSF GIVES THE CURRENT VIEW RULE SETTINGSQ SIZE GIVES THE VIEW O/ALL DIMENSIONSQ SNAP GIVES THE SNAP SETTING (ON/OFF)Q SNAP GIVES THE SNAP SETTING (ON/OFF)Q THMRF GIVES THE CE (SYMBOL) NAMEQ THPOS GIVES THE C/VIEW MATCHLINE CO-ORDS

Q TMRF GIVES THE CE (SYMBOL) NAMEQ TPOS GIVES THE CE PIPE TAIL CO-ORDSQ TPT GIVES THE STRA TAIL POINT CO-ORDSQ VLIMITS GIVES THE VIEW LIMITSQ VSCALE GIVES THE C/VIEW SCALE (ie 0.5)0.5 = 1:20.2 = 1:50.1 = 1:100.05 = 1:200.04 = 1:250.02 = 1:500.01 = 1:100Q VTYP GIVE THE VIEW ATT (ie GLOBAL HIDDEN)Q XYPOS GIVES THE VIEW POSITION ON SHEET

GIVES THE C/VIEW SCALE (ie 0.5)0.5 = 1:20.2 = 1:50.1 = 1:100.05 = 1:200.04 = 1:250.02 = 1:500.01 = 1:100

DRAFT TYPED COMMANDSCommand SyntaxADEG 0ADEG 45ADEG 90APOFFSET 5-5AT @AT IDP@AT IDPL@BLNK FALSEBLNK TRUEBTEST'A-A'BY @BY X100BY Y100CPOFFSET 5-5DIM TEX'#100 TYP'DPOS @DTAN DEFDTAN PARDTAN HORDTAN STANDTAN VERTICALDTOF @DTOF 0 4DTAN PART DTOF 8 0NLPN OFFFPT @FPT BY X2 Y-2FRAME ONGAP @GAP DELETE ALLGAP DELETE ATGBOX 5HIGH CEINCL CIRC 1 OF NOTE/TABLEINCL NAMEàààLEAD STRALEAD BENT @LVIS FALSELVIS TRUELLEAD FALSELLEAD TRUELTER OFFLTER ARRLTER DOTLTER OBLMODIFY @NEW CIRCL DIAM 100 AT@NEW CIRCL RAD 50 AT@NEW GLAB COPY $V1NEW GLAB COPY PREV AT@NEW RECT XLEN40 YLEN20 ANG 45 ORIG CORNER AT @NEW GLAB COPY PREV AT@NLPN OFFOSHT 10

OSHT @PLCL @PROJ CLEAR @PROJ CLEAR 6PROJ TEX 'TYP'PTAN PARPTAN HORPTAN VERTICALPTOF -8 0RCOD LEFTREPEAT 5 BY X10SNAP ON/OFFSNAP ON 10SNAP ON SPACING X10 Y20TPEN 71TPT @TPE BY X2 Y-2UPDATE ANNOUPDATE DESIGNUPDATE PICTURECGRID ON/OFF#<SECTION A-A#DEF#<#DIM #>#<#DIM#>#/TYPWEST SHELL #< #>#SPRE (C10:19)UB#SPRE (C10:16)UBEL.#DIMPOSU (C2:5).#DIMPOSU(C6:)EL.+#DIMPOSU (C2:5).#DIMPOSU(C6:)

DescriptionMODIFIES TEXT HORIZONTALMODIFIES TEXT/PRIMITIVES AT 45 DEGMODIFIES TEST VERTICALRE-POSITIONS LTR END X5 Y-5MOVES CE TO NEW CURSOR POSMOVES CE TO SELECTED PPOINTMOVES CE TO SELECTED PLINETEXT REMOVES BLANKED AREA BELOWTEXT BLANKS ALL IT OVERLAYSMODIFIES TEXT TO A-AMOVES CE BY LOCT FROM POS TO NEW POSMOVES CE X (EAST) 100mmMOVES CE X (NORTH) 100mmRE-POSITIONS LEADER LINE START X5 Y-5DIMENSION TEXT READS 100 TYPPLACES THE LDIM POSITION BY CURSORDIMENSION TEXT DEFAULTDIMENSION TEXT PARALLELDIMENSION TEXT HORIZONTALDIMENSION TEXT STANDARDDIMENSION TEXT VERTICALDIMENSION TEXT BY CURSORDIMENSION TEXT OFFSET X0 Y4DIM TEXT PAR. & OFF X-8 Y0TURNS LINE OFF(ie CLOUD VERTEX)MOVES STRA FROM POINT BY CURSORMOVES STRA FROM POINT BY TYPED INPUTTEXT FRAME ONLETS CURSOR DETERMINE DIMENSION GAPDELETES ALL DIMENSION GAPSDELETES DIMENSION GAP BY CURSORMODIFIES TEXT FRAME WITH 5 CLEARANCEHIGHLIGHTS CEREPOSITIONS CIRC 1 TO PREV. SELECTED DESTINATIONREPOSITION CE TO A SELECTED DESTINATIONCHANGES LEADER LINE TO STRAIGHTPLACES ANOTHER VERTEX ON LEADERLINETURNS CE VISIBILITY OFFTURNS CE VISIBILITY ONLEADERLINE OFFLEADER LINE ONLINE TERMINATOR OFFLINE TERMINATOR ARROWLINE TERMINATOR DOTLINE TERMINATOR DASHENABLES MODS TO SLAB/GLAB GEOMETRYDRAWS CIRCLE AND POSITIONS BY CURSORDRAWS CIRCLE AND POSITIONS BY CURSORCOPIES GLAB AS VARIABLE $V1COPIES GLAB TO PICKED LOCATIONDRAWS RECT AND POSITIONS IT BY CURSORCOPIES TEXT AND POSITIONS BY CURSORTURNS LINE OFF(ie CLOUD VERTEX)DIM LINE OVERSHOOT 10mm

DIM LINE OVERSHOOT BY CURSORPOSITION LEADER LINE BY CURSORSETS PROJECTION LINE POSITIONS BY CURSORSETS PROJECTION LINE POSITION BY 5mmPROJECTION TEXT READS TYPPROJECTION TEXT PARALLELPROJECTION TEXT HORIZONTALPROJECTION TEXT VERTICALPROJECTION TEXT OFFSET X-8 Y0ROTATES VIEW BOX LEFTCOPIES CE 5 TIMES BY 10mm SPACESTURNS SNAP ON/OFFGIVES SNAP GRID X10 Y10GIVES SNAP GRID X10 Y20GIVES THE TEXP COLOUR ATTRIBUTE 71MOVES STRA TO POINT BY CURSORMOVES STR TO POINT BY TYPED INPUTUPDATES ANNOTATIONUPDATES DESIGNUPDATES GRAPHICSTURNS SNAP GRID VISIBILITY ON/OFFUNDERLINES TEXT ie SECTION A-ADEFAULT DIMENSION ie 4500UNDERLINES DIMENSION ie 4500UNDERLINES DIMENSION ie 45000WEST SHELLFORMAT ON DRG. 254x102x22UBFORMAT ON DRG. 254x102UBFORMAT ON DRG. EL.508.500FORMAT ON DRG. EL. +508.500

PDMS DIRECTION COMMANDSCommand DescriptionDIR N Direct NorthDIR N 45 Direct NorthDIR N 45 E Direct North 45 deg EastDIR N 45 E 30 Direct North 45mm and East 30mmDIR N 45 E 30 D Direct North 45 deg East 30 deg DownDIR N 45 E 30 D 10 Direct North 45mm East 30mm and Down 10mmDIR S 30 E Direct South 30 deg EDIR E 60 S Direct South 30 deg EDIR N 100 D 1 Direct North with 1 in 100 slopeDIR N 0.5729 D Direct North with 1 in 100 slopeDIR N 2300 D 23 Direct North with 1 in 100 slopeDIR N 50 D 1 Direct North with 1 in 50 slopeDIR N 01.1458 D Direct North with 1 in 50 slopeDIR N 2300 D 46 Direct North with 1 in 50 slope