peditred lp - cs group
TRANSCRIPT
4005 Royal Drive Suite 300 | Kennesaw, GA 30144 | 888-424-6287 | www.impactspecialties.com
Specification
formerly
PediTred LP
Aluminum Entrance Grid With Vinyl Cushion
Technical Data• 750 lbs. Per Wheel Rolling Load• 1/2” (12.7mm) Grid Depth• Product Weight- 2.67 lbs./sq. ft.• 1.5” (38.1mm) o.c. Tread Spacing• Aluminum Tread Rails• Vinyl Cushion• 2 Year Limited Warranty
Options• 10 Finishes Available• 7 Tread Inserts Available• Logo Mats Available• Unpunched Connector Available• Non PVC Hinges Available
Tread Selections
EXTERIORCARPETCARPET MonoTuft HD™
POUREDABRASIVE
SERRATEDALUMINUM VINYL
VINYLABRASIVE
EXTERIORCARPETCARPET MonoTuft HD™
POUREDABRASIVE
SERRATEDALUMINUM VINYL
VINYLABRASIVE
EXTERIORCARPETCARPET MonoTuft HD™
POUREDABRASIVE
SERRATEDALUMINUM VINYL
VINYLABRASIVE
EXTERIORCARPETCARPET MonoTuft HD™
POUREDABRASIVE
SERRATEDALUMINUM VINYL
VINYLABRASIVE
EXTERIORCARPETCARPET MonoTuft HD™
POUREDABRASIVE
SERRATEDALUMINUM VINYL
VINYLABRASIVE
EXTERIORCARPETCARPET MonoTuft HD™
POUREDABRASIVE
SERRATEDALUMINUM VINYL
VINYLABRASIVE
EXTERIORCARPETCARPET MonoTuft HD™
POUREDABRASIVE
SERRATEDALUMINUM VINYL
VINYLABRASIVE
TRAF
FIC
DIRE
CTIO
N
SECTION Y-Y
1/2" [12.7mm]
PEDITRED LP LENGTHTRAFFIC DIRECTION
LC1 1/2" [38.1mm]
LC 3/4" [19.1mm]
4 INSERT ALUMINUMRAILEXTRUDED END VINYL DUAL DUROMETER
VINYL CONNECTOR
3 INSERT ALUMINUMRAIL
TRAF
FIC
DIRE
CTIO
N
SECTION Y-Y
1/2" [12.7mm]
PEDITRED LP LENGTHTRAFFIC DIRECTION
LC1 1/2" [38.1mm]
LC 3/4" [19.1mm]
4 INSERT ALUMINUMRAILEXTRUDED END VINYL DUAL DUROMETER
VINYL CONNECTOR
3 INSERT ALUMINUMRAIL
4005 Royal Drive Suite 300 | Kennesaw, GA 30144 | 888-424-6287 | www.impactspecialties.com
Specification
copy
right
© 2
014
- v1-
7/24
/14
formerly
Section 12484Suggested Specifications
Part 2 - Products2.01 ManufacturersA. Drawings and specifications are based on manufacturer’s literature from Impact Specialties (888)424-6287 unless otherwise indicated. Other manufacturers must comply with the minimum levels of material and detailing indicated on the drawings and specified herein.
2.02 MaterialsA. Aluminum - 6105-T5 for extrusions.B. Vinyl/Acrylic - High-impact PVC alloy.C. Flexible and prime PVC extrusions.D. Tread insert options - refer to section 2.05.
2.03 Floor MatsA. Model and Description - G3 PediTred LP shall be extruded 6105-T5 aluminum alloy, multiple tread planks which are joined by a dual durometer PVC combination hinge to comprise the overall grid length (traffic-direction). All material shall be perforated to allow drainage, unless otherwise specified. Supplied in mill (standard) or one of 9 optional colors as offered by manufacturer. (Call factory for custom colors.) Choose from anodized or heavy-duty powder coat finish. Units must withstand 750 lb. wheel loads (load applied to a solid 5” x 2” wide polyurethane wheel, 1000 passes without deformation).
2.04 Mat Frames[Specifier note: Although most entrance flooring systems can accommodate some variation in the flatness of mat well bases, it is recommended that the surface beneath the mat or grid be finished with a leveling screed to ensure optimum performance of the system. Mill finish frames in contact with concrete to be primer coated.]A. TA Tapered Aluminum Frame shall be a 2”(50.8mm) wide 6063-T6 aluminum alloy and permanently positions mat for surface mounted applications. Choose from
mill (standard) or one of 9 optional colors as offered by manufacturer. (Custom colors are available.) Choose from anodized or heavy-duty powder coat finish. Note: Mill finish frames in contact with concrete to be primer coated.B. PS Pipe-Stem Frame as supplied in 6063-T5-aluminum alloy creates a receiver for surrounding commercial carpet. Choose from mill (standard) or one of 9 optional colors as offered by manufacturer. (Custom colors are available.) Choose from anodized or heavy-duty powder coat finish. Note: Mill finish frames in contact with concrete to be primer coated.C. LB Level Base Frame shall be a 3/4” (19.1mm) deep recessed frame in 6063-T6 aluminum alloy (optional architectural bronze) with 1/4”(6.4mm) wide exposed surface. Choose from mill (standard) or one of 9 optional colors as offered by manufacturer. (Custom colors are available.) Choose from anodized or heavy-duty powder coat finish. Note: Mill finish frames in contact with concrete to be primer coated. Installer shall use recommended latex screed to ensure level base.D. TNG Tapered Angle Frame (Specifier note: the tapered angle frame is for use when additional screed for level base is not necessary.) shall be a ½” (19.1mm) deep recessed frame in 6063-T5 aluminum alloy. Frame color shall be supplied in standard mill or one of 9 optional colors as offered by manufacturer. (Custom colors are available.) Choose from anodized or heavy-duty powder coat finish. Note: Mill finish frames in contact with concrete to be primer coated.E. THFR Threshold Frame shall be supplied in 6063-T5 aluminum alloy. For surface/recess installations to provide a flush transition from the entryway door threshold to the product surface.
2.05 Tread Insert Options for G3 PediTred LP(Specifier to select one below and delete others)A. CP Carpet shall be colorfast, solution dyed 100% nylon available in one of 25 standard colors as offered by manufacturer. Each carpet fiber shall be fusion bonded to rigid two-ply backing to prevent fraying and supplied
in continuous splice-free lengths. Anti-static carpet fiber shall contain antimicrobial additive and be treated with Scotchgard® to reduce soiling. Carpet weight shall be 29-oz./yd².B. HD MonoTuft HD™ Carpet shall meet the Carpet and Rug Institute’s standard for indoor air quality. Fibers shall include a minimum of 100, 12 mil monofilament fibers per square inch and colorfast, solution-dyed nylon. Available in one of 25 standard colors as offered by manufacturer. Each carpet fiber and monofilament shall be fusion-bonded to a rigid two-ply backing to prevent fraying and supplied in continuous splice-free lengths. Anti-static carpet fiber shall contain antimicrobial additive and be treated with Scotchgard® to reduce soiling. Carpet weight shall be 33- oz./yd².C. EC Exterior Carpet shall be solution dyed polypropylene fibers with 50/50 blend of 600/12-denier multi filament and 595/D1 monofilament, available in one of 4 standard colors as offered by manufacturer. The texturized fibers have ultraviolet blockers and color as an integral part of the filament. Each carpet fiber and monofilament shall be fusion-bonded to a rigid two-ply backing to prevent fraying and supplied in continuous splice-free lengths. Waterproof fibers do not get soggy, rot, fade or stain. Carpet weight shall be 32-oz./yd².D. VA Abrasive Insert shall include a flexible abrasive grit tape, bonded to a rigid aluminum tread insert. Tread insert shall be supplied in mill (standard), clear, bronze or black complete with one of 6 abrasive colors as offered by manufacturer. E. PA Poured Abrasive shall include a factory-bonded two-part epoxy containing aluminum oxide grit. Color shall be selected from one of 6 standard colors.F. V Vinyl shall include a flexible dual durometer vinyl insert in any one of six standard colors as selected.G. SAI Serrated Aluminum shall be extruded 6105-T5 alloy available in one of four colors as offered by manufacturer.H. L Logo Option (Carpet and MonoTuft HD™ Carpet Insert only) Each entrance mat specifically detailed shall include a logo or trademark
PediTred LP
Aluminum Entrance Grid With Vinyl Cushion
Surface Mounted Tapered Aluminum Frame
Surface Mounted Pipestem Frame
RecessedTapered Angle Frame
RecessedLevel Base Frame
RecessedThreshold Frame