pga309 evm multi-cal-tools-v1.6a user’s guide
DESCRIPTION
PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide. Iven Xu April. 25 th , 2013 [email protected]. Agenda. USB_DAQ and Multi-Cal-Tools overview Hardware configuration Software configuration. a) USB_DAQ and Multi-Cal-Tools overview. a) USB_DAQ and Multi-Cal-Tools overview. - PowerPoint PPT PresentationTRANSCRIPT
![Page 2: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/2.jpg)
Agenda• USB_DAQ and Multi-Cal-Tools overview• Hardware configuration• Software configuration
2
![Page 3: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/3.jpg)
3
a) USB_DAQ and Multi-Cal-Tools overview
![Page 4: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/4.jpg)
a) USB_DAQ and Multi-Cal-Tools overview• USB_DAQ Board Default Configuration:
4
![Page 5: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/5.jpg)
a) USB_DAQ and Multi-Cal-Tools overview• Multi-Cal-Tools Board:
5
![Page 6: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/6.jpg)
a) USB_DAQ and Multi-Cal-Tools overview• Multi-Cal-Slave Board(optional board):
6
![Page 7: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/7.jpg)
a) USB_DAQ and Multi-Cal-Tools overview• Multi-Cal-Interface PCA board:
7
![Page 8: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/8.jpg)
a) USB_DAQ and Multi-Cal-Tools overview• Multi-Cal-Interface Cable:
8
![Page 9: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/9.jpg)
a) USB_DAQ and Multi-Cal-Tools overview• Multi-Cal-Power Cable:
9
![Page 10: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/10.jpg)
a) USB_DAQ and Multi-Cal-Tools overview• Final setup overview:
10
This is our test board, you can connect your PGA309 board to J* or T* of interface board.
![Page 11: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/11.jpg)
a) USB_DAQ and Multi-Cal-Tools overview• Multimeter:
– Agilent 34401A (GPIB, Real RS232)– TH1961 (USB-to-RS232)
• Our software “***.v1.6a” can support those three different interface– Download link:– ftp://ftp.ti.com/pub/linear_apps/Multi-Cal-PGA309/
11
![Page 12: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/12.jpg)
12
b) Hardware configuration
![Page 13: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/13.jpg)
b) Hardware configuration:• Step 1:
13
![Page 14: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/14.jpg)
b) Hardware configuration:• Step 2:
14
![Page 15: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/15.jpg)
b) Hardware configuration:• Step 3:
15
This is our test board, you can connect your PGA309 board to J* or T* of interface board.
![Page 16: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/16.jpg)
b) Hardware configuration:• Step 4:(4-wire voltage output)
Notes:(Same GND for thebelow two power supply)Power supply #1:+Vdut =5V-Vdut=GND
Power supply #2:+-15VGND
16
![Page 17: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/17.jpg)
b) Hardware configuration:• Step 4:(4-wire voltage output)
Notes:(Same GND for thebelow two power supply)Power supply #1:+Vdut =5V-Vdut=GND
Power supply #2:+-15VGND
17
![Page 18: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/18.jpg)
b) Hardware configuration:• Step 5:(4-wire current output)
Notes:(Float GND for power supply #1)Power supply #1:+Vdut =24V-Vdut≠GND
Power supply #2:+-15VGND
18
![Page 19: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/19.jpg)
b) Hardware configuration:• Step 5:(4-wire current output)
Notes:(Float GND for power supply #1)Power supply #1:+Vdut =24V-Vdut≠GND
Power supply #2:+-15VGND
19
You can use your own Multi-meter with current measurement!
![Page 20: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/20.jpg)
Extending the system with Slave Board:
20
![Page 21: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/21.jpg)
21
c) Software configuration
![Page 22: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/22.jpg)
c) Software configuration:
22
Windows 7 Attention
![Page 23: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/23.jpg)
c) Software configuration:• Press “Select Model File” to select correct model file.• Also, you can use “”Create Model File” to create a new model file.
23
![Page 24: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/24.jpg)
c) Software configuration:• Default Model Files for you:
24
![Page 25: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/25.jpg)
c) Software configuration:• Press “Start Cal” and then press the four Yes and Continue with Calibration
25
![Page 26: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/26.jpg)
c) Software configuration:• Press “Continue” to do the Fast Scan.• For the below picture, channel 0 and 1 is ok because I only connected two
sensor modules to channel 0 and 1.
26
![Page 27: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/27.jpg)
c) Software configuration:• Press “Continue” to do the calibration• Below result was tested with TH1961 (with USB-232 rather than GPIB).
27
![Page 28: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/28.jpg)
c) Software configuration:• The other thing you need to pay more attention is “Address of TH1961”,• The current address of TH1961 we used is “COM 6”. • You need to change it in DMM script file.
• Detailed step is in the below slides:
28
![Page 29: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/29.jpg)
c) Software configuration:• How to create a new model file to match the address of TH1961.
29
![Page 30: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/30.jpg)
c) Software configuration:• Take voltage output as an example:• Select “4wire_4p096_diode_USB.txt”
30
![Page 31: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/31.jpg)
c) Software configuration:• Take voltage output as an example:• Press “Edit DMM Script” and select “Voltage_TH1961_USB.txt”
31
![Page 32: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/32.jpg)
c) Software configuration:• Take voltage output as an example:• Change the COM port in the open script file. Make sure it is the same as your
Multimeter(TH1961) address.
32
![Page 33: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/33.jpg)
c) Software configuration:• Take voltage output as an example:• After you change the script file, please save the file and re-select the script
file again. Then press “save” to save the Model File.
33
![Page 34: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/34.jpg)
c) Software configuration:• Take voltage output as an example:• Save the Model File:
34
![Page 35: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/35.jpg)
• Select the new Model File, then you can press “Start Cal” to do the calibration.
35
c) Software configuration:
![Page 36: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/36.jpg)
4-wire voltage output result:• After the calibration:
36
![Page 37: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/37.jpg)
For current output:• Model File:
– Iout_4p096_diode_USB.txt
• DMM script file:– Current_TH1961_USB.txt
Also need to pay more attention on the address of DDM!
37
![Page 38: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/38.jpg)
Thanks!
38
![Page 39: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/39.jpg)
Back Up!If you are using Agilent 34401, pls see the below two slides of configuration files.
39
![Page 40: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/40.jpg)
If you use Agilent 34401A with GPIB:• Voltage output:
– Model File:• 4wire_4p096_diode.txt
– DMM script file:• Volt_34401_GPIB.txt
• Current output:– Model File:
• Iout_4p096_diode.txt– DMM script file:
• Current_34401_GPIB.txt
Also need to pay more attention on the address of DDM!
40
![Page 41: PGA309 EVM Multi-Cal-Tools-V1.6a User’s Guide](https://reader035.vdocument.in/reader035/viewer/2022081513/5681360a550346895d9d8055/html5/thumbnails/41.jpg)
If you use Agilent 34401A with RS232:• Voltage output:
– Model File:• 4wire_4p096_diode.txt
– DMM script file:• Voltage_34401_rs232.txt
• Current output:– Model File:
• Iout_4p096_diode.txt– DMM script file:
• Current_34401_rs232.txt
Also need to pay more attention on the address of DDM!
41