850 East Covey Lane, Suite #140, Phoenix, AZ 85024Phone: 623.552.7065 WWW.TITANLEDUS.COM

High Bay Solid State LuminaireINSTALLATION MANUAL

For Titan LED High Bay Models:

(120 - 277V) (277 - 480V)

Hennessy Series

32C-HB-2P-56-6-80 32D-HB-2P-56-6-120 32C-HB-2P-56-6-110 32C-HB-2P-56-7-80 32D-HB-2P-56-7-12032C-HB-2P-56-7-11032C-HB-2P-56-8-8032D-HB-2P-56-8-12032C-HB-2P-56-8-110

33C-HB-3P-84-7-8033D-HB-3P-84-7-12033C-HB-3P-84-7-11033C-HB-3P-84-9-8033D-HB-3P-84-9-12033C-HB-3P-84-9-11034C-HBS-4P-112-8-8034D-HBS-4P-112-8-12034C-HBS-4P-112-8-110

34C-HB-4P-112-8-8034D-HB-4P-112-8-12034C-HB-4P-112-8-11036C-HB-6P-168-7-8036D-HB-6P-168-7-12036C-HB-6P-168-7-11038C-HB-6P-168-9-8038D-HB-6P-168-9-12038C-HB-6P-168-9-110

BEFORE INSTALLATION PLEASE READ ALL PRODUCT LABELS AND INSTALLATION INSTRUCTIONS

THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN FAMILIAR WITH THE CON-STRUCTION AND OPERATION OF THIS TITAN LED PRODUCT AND OF ANY HAZARDS INVOLVED

INSTALLATION MUST BE IN ACCORDANCE WITH NATIONAL ELECTRICAL CODE AND ALSO ALL RELEVANT LOCAL CODES

WARNING: IMPROPER INSTALLATION WILL VOID THIS PRODUCTS WARRANTYWARNING: TO AVOID RISK OF ELECTRICAL SHOCK DISCONNECT A/C POWER AT CIRCUIT

BREAKER POWERING JUNCTION BOX BEFORE PERFORMING ANY A/C ELECTRICALTASKS

TITAN LED FIXTURE WIRING DESCRIPTION:

BLACK WIRE: AC LOAD / LINE / HOTWHITE WIRE: AC NEUTRALGREEN: AC GROUND

CAUTION: EXISTING WIRING SHOULD BE CHECKED BEFORE INSTALLATION TO INSURE CORRECT WIRING POLARITY AND CORRECTLY FUNCTIONING GROUND. EXISTING LUMINAIRE REPLACEMENT NECCESSITATES CAREFULLY REMOVING BULBS AND THEN THE LUMINAIRE

CAUTION: HID LAMPS AND BALLAST ARE FOUND TO CONTAIN SUBSTANCES HAZARDOUS TO HUMANS AND WILDLIFE. SOME BALLAST CONTAIN POLYCHLORINATED BIPHENYLSALSO KNOWN AS PCB’S. PROPER HAZARDOUS MATERIAL DISPOSAL IS REQUIRED

CAUTION: TO AVOID THE RISK OF ELECTRICAL SHOCK, ALLOW 5 MINUTES AFTER DISCONNECTFROM A/C POWER TO DRAIN CAPACITOR FIELD CONTAINED IN FIXTURES LED DRIVER

Thank You for your purchase of Titan LED’s LED lighting Product. Please take a moment to read this guide and familiarize yourself with this State of the Art Solid State LED product.

Please Observe All Safety Precautions Before Installation.

CAUTION: DISCONNECT ALL A/C POWER BEFORE LIGHT FIXTURE INSTALLATION

CAUTION! SAFETY WARNINGS:

UNPACKING YOUR NEW TITAN LED LIGHTING FIXTURE:CAREFULLY REMOVE LIGHTING FIXTURE FROM PACKAGING CHECKING FOR ANY SIGNS OF DAMAGE

ATTENTION: IF YOU HAVE OPENED THIS HIGH BAY LIGHTING FIXTURE BY REMOVING THE

ATTENTION!When wiring fixture for 480V Dual PhaseThe white neutral leg is used for the 2ndphase load connection.

10 LARGE ALLEN HEAD SCREWS. PLEASE NOTE THE FOLLOWING: WHEN READY TO REASSEMBLE THE FIXTURE, PLEASE BE CAREFUL TO ROUTE INTERNAL EXCESS A/C AND LOW VOLTAGE CABLING AROUND AND AWAY FROM THE INTERNAL ACC FANS WHEN REATTACHING FIXTURES COVERAll information and images are the exclusive property of Titan LED Inc. 2019 and may not be used without permission.

ATTENTION: LUMINAIRE MUST BE MOUNTED IN ACCORDANCE WITH LOCAL AND NATIONAL BUILDING CODES

MOUNTING:1) IT IS REQUIRED TO USE THE PROPER OPTIONAL WEIGHT RATED HARDWARE TO SECURLY

AND SAFELY INSTALL THIS LIGHTING FIXTURE, PLEASE SEE ILLUSTRATIONS BELOW.2) REMOVE HIGH BAY FIXTURES J-BOX COVER AND SECURELY MOUNT A 3/4” MEYERS HUB TO

THE HOLE IN THE LID OF THE HIGH BAYS JUNCTION BOX, THIS OPTION ALLOWS MOUNTING HIGH BAY SECURLY TO A THREADED PIPE THAT MUST EFFECTIVLY HANDLE THE TOTALWEIGHT OF THIS LIGHTING FIXTURE.

PLEASE ADHERE CLOSELY TO ALL HARWARE INSTALLATION GUIDELINES TO INSURE PROPER SAFETY AND OPERATIONAL FUNCTIONS.

CAUTION: PROPERTY DAMAGE, SERIOUS INJURY, AND OR DEATH MAY OCCUR FROM IMPROPER INSTALLATION OF LIGHTING FIXTURE.

CAUTION: THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THIS TITAN LED PRODUCT AND OF ANY HAZARDS INVOLVED.

3) CONNECT THE A/C SUPPLY WIRES TO THE LUMINAIRES CONNECTION WIRES FOUND INSIDETHE HIGH BAYS J-BOX WITH THE BLACK WIRE BEING THE A/C LOAD (HOT), THE WHITE WIREBEING A/C NEUTRAL AND THE GREEN WIRE BEING A/C GROUND.

4) AFTER INSPECTION OF PROPER AND SECURE A/C CONNECTIONS YOU CAN RESET THE MAINPOWER CIRCUIT AT THE BREAKER. YOU CAN NOW POWER ON THE NEW LIGHTS.

5) LOW VOLTAGE 0-10V DIMMING IS AN OPTION BUILT INTO TITAN LEDS DRIVERS (POWER SUP- PLIES) THESE LOW VOLTAGE DIMMING WIRES ARE COLORED RED (dim +) AND BLACK (DIM -) AND WILL OPERATE WITH 0-10V LOW VOLTAGE DIMMER SYSTEMS ONLY. IF DIMMING CIRCUIT IS NOT TO BE USED, LEAVE THE RED AND BLACK WIRE LEADS CAPPED.

INSTALLATION INSTRUCTIONS:

Titan LED High Bays have a custom built in top side Junction Box with a pre-cut hole in its Lid to accept a Stan-dard 3/4” N.P.T. Meyers Hub. This is standard for pendant mounting applications. Titan LED High Bays are also equipped with 4 built in cable hangers, utilizing at least one with the proper weight rated cable or chain is recom-mended as an additional security in most hanging installations.

In this image Titan LED’s Top Side Junction Box is shown with an optional 3/4” Meyers Hub for pendant mounting. To gain easy access to wire connections remove the 2 screws that secure the Titan J-Box’s cover.

Cable Hangers are Built in to all 4 Top Corners of the High Bay Housing.0-10v Low Voltage Dimming

Wires are Red + and Black -

3/4” NPTMeyers Hub