photocatalytic degradation of methylene blue by innovative...

1
Photocatalytic Degradation of Methylene Blue by Innovative BiVO 4 /TiO 2 Composite Films under Visible Light Irradiation Kanlaya Pingmuang 1,2 , Andrew Nattestad 2,* , Jun Chen 2 , Wiyong Kangwansupamonkon 3 , Sukon Phanichphant 4,* 1 Department of Chemistry, Faculty of Science Chiang Mai University, Chiang Mai 50200, Thailand 2 Intelligent Polymer Research Institute ARC Centre of Excellence for Electromaterials Science, University of Wollongong, NSW, 2522, Australia 3 National Nanotechnology Center, Thailand Science Park, Paholyothin Road, Klong 1, Klong Luang, Pathumthani, 12120, Thailand. 4 Materials Science Research Center, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand *E-mail: [email protected] [email protected] Bismuth vanadate and titanium dioxide (BiVO 4 /TiO 2 ) composites used as visible-light-driven photocatalysts were successfully synthesized with different mole ratio by coupling of a co- precipitation method with a sol-gel method. The phase transitions of the as-prepared BiVO 4 /TiO 2 composites were carried out by X-ray diffraction (XRD). The results clearly indicated that the as-synthesized BiVO 4 /TiO 2 composites presented in two crystalline phases, which were monoclinic BiVO 4 and tetragonal TiO 2 (anatase) structures. Raman spectroscopy provided further structural evidence as to the composition of the BiVO 4 /TiO 2 composites. In order to investigate the effect of TiO 2 on the BiVO 4 photocatalyst, X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) were used to consider the BiVO 4 /TiO 2 composite as comparison with the pure TiO 2 and BiVO 4 . It was found that the BiVO 4 /TiO 2 composite was formed by coupling TiO 2 nanoparticles on surface of BiVO 4 particles, rather than a doped material. Light absorption of the BiVO 4 /TiO 2 composites across the UV-visible spectrum and band gap energy were also investigated by UV-vis diffuse reflectance (UV-vis DR) spectroscopy. Furthermore, the BiVO 4 /TiO 2 composites were fabricated in film form by a doctor blading technique on glass substrates to solve the catalysts separation issue for studying their photocatalytic activities evaluated via degradation of methylene blue (MB) dye in aqueous solution under visible light irradiation. Photocatalytic results showed that the composite photocatalysts showing a higher photocatalytic activity (with pseudo-first order kinetics) than the pure BiVO 4 and TiO 2 do individually, which the BiVO 4 /TiO 2 composite with mole ratio of 1:1 exhibited the highest of the apparent MB degradation rate constant of 1.568 h -1 . Since electronic interaction between BiVO 4 and TiO 2 leads to an improved charge separation of the coupled BiVO 4 /TiO 2 system, that is responsible for the enhancement in the rate of photocatalytic degradation. Additionally , the MB degradation efficiency over the BiVO 4 /TiO 2 composite films had no significant changes after five reuse cycles, indicating the long-term stability of the films. BiVO 4 /TiO 2 composite films are intended to be used in photocatalytic degradation of organic pollutants in wastewater, especially those from the textile and the photographic industries.

Upload: others

Post on 24-Jan-2021

13 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Photocatalytic Degradation of Methylene Blue by Innovative ...environment.scientific-journal.com/abstracts/3/12.pdf · Photocatalytic Degradation of Methylene Blue by Innovative BiVO

Photocatalytic Degradation of Methylene Blue by Innovative BiVO4/TiO2 Composite Films under Visible Light Irradiation

Kanlaya Pingmuang1,2, Andrew Nattestad2,*, Jun Chen2, Wiyong Kangwansupamonkon3,

Sukon Phanichphant4,*

1Department of Chemistry, Faculty of Science Chiang Mai University, Chiang Mai 50200, Thailand

2Intelligent Polymer Research Institute ARC Centre of Excellence for Electromaterials Science, University of Wollongong, NSW, 2522, Australia

3National Nanotechnology Center, Thailand Science Park, Paholyothin Road, Klong 1, Klong Luang, Pathumthani, 12120, Thailand.

4Materials Science Research Center, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand

*E-mail: [email protected] [email protected]

Bismuth vanadate and titanium dioxide (BiVO4/TiO2) composites used as visible-light-driven photocatalysts were successfully synthesized with different mole ratio by coupling of a co-precipitation method with a sol-gel method. The phase transitions of the as-prepared BiVO4/TiO2 composites were carried out by X-ray diffraction (XRD). The results clearly indicated that the as-synthesized BiVO4/TiO2 composites presented in two crystalline phases, which were monoclinic BiVO4 and tetragonal TiO2 (anatase) structures. Raman spectroscopy provided further structural evidence as to the composition of the BiVO4/TiO2 composites. In order to investigate the effect of TiO2 on the BiVO4 photocatalyst, X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) were used to consider the BiVO4/TiO2 composite as comparison with the pure TiO2 and BiVO4. It was found that the BiVO4/TiO2 composite was formed by coupling TiO2 nanoparticles on surface of BiVO4 particles, rather than a doped material. Light absorption of the BiVO4/TiO2 composites across the UV-visible spectrum and band gap energy were also investigated by UV-vis diffuse reflectance (UV-vis DR) spectroscopy. Furthermore, the BiVO4/TiO2 composites were fabricated in film form by a doctor blading technique on glass substrates to solve the catalysts separation issue for studying their photocatalytic activities evaluated via degradation of methylene blue (MB) dye in aqueous solution under visible light irradiation. Photocatalytic results showed that the composite photocatalysts showing a higher photocatalytic activity (with pseudo-first order kinetics) than the pure BiVO4 and TiO2 do individually, which the BiVO4/TiO2 composite with mole ratio of 1:1 exhibited the highest of the apparent MB degradation rate constant of 1.568 h-1. Since electronic interaction between BiVO4 and TiO2 leads to an improved charge separation of the coupled BiVO4/TiO2 system, that is responsible for the enhancement in the rate of photocatalytic degradation. Additionally, the MB degradation efficiency over the BiVO4/TiO2 composite films had no significant changes after five reuse cycles, indicating the long-term stability of the films. BiVO4/TiO2 composite films are intended to be used in photocatalytic degradation of organic pollutants in wastewater, especially those from the textile and the photographic industries.