Plasma Mount Installation

1 Remove parts from over wrapper and

slide out the lock blocks by unscrewing the small screws on the side of the mount arms.

Remove the VESA brack-ets from the mount arms by sliding them up and out of the keyhole slots.

2 With a 5/16” drill, drill 3 holes in the

wall at the measurements shown. Using the pro-vided hardware, secure one mounting arm firmly to the wall.

3 Slide the alignment bar into place.

4 Slide second mounting arm

onto alignment bar and bolt to the wall in exact alignment with the first arm.

5 Loosen the screws on the VESA bracket slid-ing blocks and align the keys on the blocks with

the keyhole slots on the mounting arms. Tighten the screws.

screws

6 Mount the VESA brackets to the back of the plasma monitor using the provided hardware.

7 Adjust the tension on the mount arm using the bolt on the support links.

8 Mount the plasma monitor on the arms using the keyhole slots. Reinsert the locking bars and

secure with the screws.

plasma mount rev. 6/6/07 dw