2011

CATALOGUE

FLYTECH ENGINEERING SDN BHD

PNEUMATIC TUBING FITTING

PNEUMATIC FITTING

www.flytech.com.my Page 1

GENERAL INFORMATION

Flytech had cooperated with ISAIAH GROUP from Taiwan to promote the Pneumatic Fitting

& Tubing. The company takes the market competition and the crisis as consciousness, earnestly

implements the ISO 9001 quality specification system. Unceasingly increases and the renewal

production equipment, the improvement production craft used the most advanced reasonable

check-out facility to produce a guarantee product quality, added the consummation after

service, enable to obtain the profession approval by NBI’s brand..

④④④④ TUBE OUTER DIA

METRIC SIZE INCH SIZE

Code 4 6 8 10 12 15 16 5/32 3/16 1/4 5/16 3/8 1/2

Dia 4 6 8 10 12 15 16 5/32 3/16 1/4 5/16 3/8 1/2

⑤⑤⑤⑤ TAPER PIPE THREAD

METRIC SIZE

Code M5 M6 M8 M10 M12 M12A M14 M16 M20

Dia M5×0.8 M6×1 M8×1 M10×1 M12×1.25 M12×1.5 M14×1.5 M16×1.5 M20×1.5

TAPER PIPE THREAD

Code 01 02 03 04 05

Dia R1/8 R1/4 R3/8 R1/2 R3/4

PNEUMATIC FITTING

www.flytech.com.my Page 2

GENERAL INFORMATION

FEATURES: - After installation, the direction of tubing can be changed freely. - It is easy for them to be mounted in the narrow places. - The tube fittings come in a wide variety of models to meet all your needs in pneumatics piping. - Even after installation, the direction of the tube can be changed freely.

SPECIFICATIONS:

- Working temperature: -20℃ ~ +80℃ - Working Pressure: 0~1.0 Mpa - Thread: Length of threads in accordance with ISO 7.1 standard - Thread sealant on all NPT thread

MATERIAL OF CONSTRUCTION

- Material Range : Nickel-plated Brass , Polypropylene, Stainless Steel - O-Ring Seal : Buna Nitrile - Button: Polypropylene - Sealing Washer : Nylon - No Silicone

APPLICATION

- Various fluid : compressed air , fluid, compatible with material of construction - Typical Industries: Automotive, packaging, paper mills, wood working, factories with wash down

processes. - Tube Compatibility : Urethane, Nylon, Polyethylene, Teflon,

PNEUMATIC FITTING

www.flytech.com.my Page 3

UNION ELBOW

CODE Tube OD ( mm )

IPVT04 4 mm

IPVT06 6 mm

IPVT08 8 mm

IPVT10 10 mm

IPVT12 12 mm

STRAIGHT UNION

CODE Tube OD ( mm )

IPUT04 4 mm

IPUT06 6 mm

IPUT08 8 mm

IPUT10 10 mm

IPUT12 12 mm

CROSS UNION

CODE Tube OD ( mm )

IPZT04 4 mm

IPZT06 6 mm

IPZT08 8 mm

IPZT10 10 mm

IPZT12 12 mm

TEE UNION

CODE Tube OD ( mm )

IPET04 4 mm

IPET06 6 mm

IPET08 8 mm

IPET10 10 mm

IPET12 12 mm

UNION BULKHEAD

CODE Tube OD ( mm )

IPMT04 4 mm

IPMT06 6 mm

IPMT08 8 mm

IPMT10 10 mm

IPMT12 12 mm

PNEUMATIC FITTING

www.flytech.com.my Page 4

UNION “Y” JOINT

CODE Tube OD ( mm )

IPY04 4 mm

IPY06 6 mm

IPY08 8 mm

IPY10 10 mm

IPY12 12 mm

IPY06-04 6 mm / 4mm

IPY08-06 8 mm / 6mm

IPY10-08 10 mm / 8mm

IPY12-10 12 mm / 10mm

MALE CONNECTOR

CODE MODEL(Ф D-T)

CODE MODEL(Ф D-T)

Tube OD (Metric)

Thread Size ( Inch )

Tube OD (Metric)

Thread Size ( Inch )

IPCT04-M5 4 mm M5 IPCT08-03 8 mm 3/8” IPCT04-01 4 mm 1/8” IPCT08-04 8 mm ½” IPCT04-02 4 mm ¼” IPCT10-01 10 mm 1/8” IPCT06-M5 6 mm M5 IPCT10-02 10 mm ¼” IPCT06-01 6 mm 1/8” IPCT10-03 10 mm 3/8” IPCT06-02 6 mm ¼” IPCT10-04 10 mm ½” IPCT06-03 6 mm 3/8” IPCT12-02 12 mm ¼”

IPCT06-04 6 mm ½” IPCT12-03 12 mm 3/8” IPCT08-01 8 mm 1/8” IPCT12-04 12 mm ½”

IPCT08-02 8 mm ¼”

PNEUMATIC FITTING

www.flytech.com.my Page 5

FEMALE CONNECTOR

CODE MODEL(Ф D-T)

CODE MODEL(Ф D-T)

Tube OD (Metric)

Thread Size ( Inch )

Tube OD (Metric)

Thread Size ( Inch )

IPCFT04-M5 4 mm M5 IPCFT08-03 8 mm 3/8” IPCFT04-01 4 mm 1/8” IPCFT08-04 8 mm ½” IPCFT04-02 4 mm ¼” IPCFT10-01 10 mm 1/8” IPCFT06-M5 6 mm M5 IPCFT10-02 10 mm ¼” IPCFT06-01 6 mm 1/8” IPCFT10-03 10 mm 3/8” IPCFT06-02 6 mm ¼” IPCFT10-04 10 mm ½” IPCFT06-03 6 mm 3/8” IPCFT12-02 12 mm ¼” IPCFT06-04 6 mm ½” IPCFT12-03 12 mm 3/8” IPCFT08-01 8 mm 1/8” IPCFT12-04 12 mm ½” IPCFT08-02 8 mm ¼”

MALE ELBOW CONNECTOR

CODE MODEL(Ф D-T)

CODE MODEL(Ф D-T)

Tube OD (Metric)

Thread Size ( Inch )

Tube OD (Metric)

Thread Size ( Inch )

IPLT04-M5 4 mm M5 IPLT08-03 8 mm 3/8” IPLT04-01 4 mm 1/8” IPLT08-04 8 mm ½” IPLT04-02 4 mm ¼” IPLT10-01 10 mm 1/8” IPLT06-M5 6 mm M5 IPLT10-02 10 mm ¼” IPLT06-01 6 mm 1/8” IPLT10-03 10 mm 3/8” IPLT06-02 6 mm ¼” IPLT10-04 10 mm ½” IPLT06-03 6 mm 3/8” IPLT12-02 12 mm ¼” IPLT06-04 6 mm ½” IPLT12-03 12 mm 3/8” IPLT08-01 8 mm 1/8” IPLT12-04 12 mm ½” IPLT08-02 8 mm ¼”

PNEUMATIC FITTING

www.flytech.com.my Page 6

BRANCH TEE CONNECTOR

CODE MODEL(Ф D-T)

CODE MODEL(Ф D-T)

Tube OD (Metric)

Thread Size ( Inch )

Tube OD (Metric)

Thread Size ( Inch )

IPBT04-M5 4 mm M5 IPBT08-03 8 mm 3/8” IPBT04-01 4 mm 1/8” IPBT08-04 8 mm ½” IPBT04-02 4 mm ¼” IPBT10-01 10 mm 1/8” IPBT06-M5 6 mm M5 IPBT10-02 10 mm ¼” IPBT06-01 6 mm 1/8” IPBT10-03 10 mm 3/8” IPBT06-02 6 mm ¼” IPBT10-04 10 mm ½” IPBT06-03 6 mm 3/8” IPBT12-02 12 mm ¼” IPBT06-04 6 mm ½” IPBT12-03 12 mm 3/8” IPBT08-01 8 mm 1/8” IPBT12-04 12 mm ½” IPBT08-02 8 mm ¼”

RUN TEE CONNECTOR

CODE MODEL(Ф D-T)

CODE MODEL(Ф D-T)

Tube OD (Metric)

Thread Size ( Inch )

Tube OD (Metric)

Thread Size ( Inch )

IPD04-M5 4 mm M5 IPD08-02 8 mm ¼” IPD04-M6 4 mm M6 IPD08-03 8 mm 3/8” IPD04-01 4 mm 1/8” IPD08-04 8 mm ½” IPD04-02 4 mm ¼” IPD10-01 10 mm 1/8” IPD04-03 4 mm 3/8” IPD10-02 10 mm ¼” IPD06-M5 6 mm M5 IPD10-03 10 mm 3/8” IPD06-M6 6 mm M6 IPD10-04 10 mm ½” IPD06-01 6 mm 1/8” IPD12-01 12 mm 1/8” IPD06-02 6 mm ¼” IPD12-02 12 mm ¼” IPD06-03 6 mm 3/8” IPD12-03 12 mm 3/8” IPD06-04 6 mm ½” IPD12-04 12 mm ½” IPD08-01 8 mm 1/8” IPD16-04 16 mm ½”

PNEUMATIC FITTING

www.flytech.com.my Page 7

SPEED CONTROLLER Feature:

- Accurate regulation of an optimal airflow rate for precise motion control. - The compact design provides the comparable rang of speed as the larger ones do. - Control-out and control-in types are available for all models. - All R and NPT threads are pre-coated sealant. - All cylindrical threads are standard with O-Ring seals.

SPECIFICATIONS

Fluid Air(No other gases or liquids) Operating Pressure 0~150PSI 0~9Kgf/cm2(0-990kPa) Negative Pressure 7.5PSI 0.5Kgf/cm2(50kPa)

Operating Temperature 32~1400F 0~600C Applicable Tube Polyurethane and Nylon

MODEL(Ф D-T) Tube(Metric)-Thread(R) Tube(Inch)-Thread(NPT)

ISC04-M5(B) ISC08-03(B) ISC5/32-N01(B) ISC3/8-N02(B) ISC04-01(B) ISC08-04(B) ISC3/16-N01(B) ISC3/8-N03(B) ISC04-02(B) ISC10-01(B) ISC3/16-N02(B) ISC3/8-N04(B) ISC06-M5(B) ISC10-02(B) ISC1/4-N01(B) ISC1/2-N03(B) ISC06-01(B) ISC10-03(B) ISC1/4-N02(B) ISC1/2-N04(B) ISC06-02(B) ISC10-04(B) ISC1/4-N03(B) ISC06-03(B) ISC12-02(B) ISC5/16-N01(B) ISC06-04(B) ISC12-03(B) ISC5/16-N02(B) ISC08-01(B) ISC12-04(B) ISC5/16-N03(B) ISC08-02(B) ISC5/16-N04(B)

MODEL(Ф D) Tube(Metric) Tube(Inch)

ISU04 ISU5/32 ISU06 ISU3/16 ISU08 ISU1/4 ISU10 ISU5/16 ISU12 ISU3/8

ISU1/2

PNEUMATIC FITTING

www.flytech.com.my Page 8

CHECK VALVE Applications

• Check valves permit airflow in one direction. • Used for maintaining the output pressure at a constant level.

Features

• The check valves permit the airflow in one direction but stops in the reverse direction. • The check valve works at the pressure of 0.1kgf/cm2, keeps 1.42Psl in vacuum and connects at a low pressure.

SPECIFICATION

Fluid Air (No other gases or liquids) Operating Pressure 0-150PSI 0~9.9Kgf/cm2（0~990Kpa） Negative Pressure -29.5in Hg -750mmHg（10Torr）

Operating Temperature 32~140OF 0~60OC Applicable Tube Polyurethane and Nylon

MODEL(Ф D-T) Tube(Metric)-Thread(R)

IPCVC04-G01(B) IPCVC10-G03(B) IPCVC06-G01(B) IPCVC10-G04(B) IPCVC06-G02(B) IPCVC12-G03(B) IPCVC08-G01(B) IPCVC12-G04(B) IPCVC08-G02(B)

MODEL(Ф D-T) Tube(Metric)-Thread(R)

IPCVF01-01(B) IPCVF02-02(B) IPCVF03-03(B) IPCVF04-04(B)

PNEUMATIC FITTING

www.flytech.com.my Page 9

SILENCER

MODEL BSL-M5 BSL-06 BSL-01 BSL-10 BSL-02 BSL-12 BSL-03 BSL-14 BSL-04

HAND VALVES

Applications

• Used for switching compressed air. Features

• This product switched air on/off air pressure devices by simply turning the handle. • Maintenance or inspection is possible when the remaining pressure in the device is removed. • There are 4 types available depending on the method applied to air pressure flow.

SPECIFICATION

Fluid Air (No other gases or liquids) Operating Pressure 0-150PSI 0~9.9Kgf/cm2（0~990Kpa） Negative Pressure -29.5in Hg -750mmHg（10Torr）

Operating Temperature 32~140OF 0~60OC Applicable Tube Polyurethane and Nylon

MODEL(Ф D-T)

Tube(Metric)-Thread(R) HVFF06-06(B) HVFF10-10(B) HVFF08-06(B) HVFF12-10(B) HVFF08-08(B) HVFF12-12(B) HVFF10-08(B)

PNEUMATIC FITTING

www.flytech.com.my Page 10

TUBING

POLYURETHENE TUBING ( PU )

PART NUMBER SIZE ( OD x ID ) WORKING PRESSURE ( PSI ) STD ROLL ( M ) PUT-0425 4mm x 2.5mm 200 100 PUT-0604 6mm x 4mm 200 100 PUT-0805 8mm x 5mm 200 100 PUT-1065 10mm x 6.5mm 200 100 PUT-1280 12mm x 8mm 200 100 PUT-1/4 ¼” 200 100 PUT-3/8 3/8” 200 100 PUT-1/2 ½” 200 100

POLYETHYLENE TUBING ( PE ) PART NUMBER SIZE ( OD x ID ) WORKING PRESSURE ( PSI ) STD ROLL ( M )

PET-0425 4mm x 2.0mm 200 100 PET-0604 6mm x 4mm 200 100 PET-0805 8mm x 6mm 200 100 PET-1065 10mm x 7mm 200 100 PET-1280 12mm x 9mm 200 100 PET-1/4 ¼” 200 100 PET-5/16 5/16” 200 100 PET-3/8 3/8” 200 100 PET-1/2 ½” 200 100

Polyurethane

� Excellent memory, flexibility and resistance to kinking.

� Resistant to most oils & fuels

� Low gas and vapour permeability

� High Compressive set

� Low extractability levels

� Outstanding abrasion resistance

� Naturally transparent

� Temperature range -20°C to 70°C

*Working pressure decrease significantly above 25°C

� Colour : Black, Blue, Transparent

Polyethylene

� Design for FDA application.

� Flexible, lightweight, low density polyethylene ( LDPE )

Tubing

� Formulated to resist stress cracking

� Temperature range -45°C to 65°C

*Working pressure decrease significantly above 25°C

� For use with plastic or metal insert with outer sleeve ferule or

clamp

� Colour : Blue, Black, White

PNEUMATIC FITTING

www.flytech.com.my Page 11

TUBING

NYLON TUBING PART NUMBER SIZE ( OD x ID ) WORKING PRESSURE ( PSI ) STD ROLL ( M )

NYT-0425 4mm x 2.0mm 200 100 NYT-0604 6mm x 4mm 200 100 NYT-0805 8mm x 6mm 200 100 NYT-1065 10mm x 7mm 200 100 NYT-1280 12mm x 9mm 200 100 NYT-1/4 ¼” 200 100 NYT-5/16 5/16” 200 100 NYT-3/8 3/8” 200 100 NYT-1/2 ½” 200 100

PTFE TUBING PART NUMBER SIZE ( OD x ID ) WORKING PRESSURE ( PSI ) STD ROLL ( M )

PTF-0425 4mm x 2.0mm 200 100 PTF-0604 6mm x 4mm 200 100 PTF-0805 8mm x 6mm 200 100 PTF-1065 10mm x 7mm 200 100 PTF-1280 12mm x 9mm 200 100

Nylon

� Recommended for applications requiring low density,

lightweight toughness, flexibility and chemical resistance.

� Temperature range -90°C to 90°C

*Working pressure decrease significantly above 75°F

� Naturally transparent

PTFE(TEFLON)

� Recommended for applications requiring acid environment.

� More rigid than other material

� Non Sticky surface

� Temperature range -60°C to 120°C

� Naturally white