presentation 22:
DESCRIPTION
Presentation 22:. HIP RIDGE THEORY AND LENGTHENING. Hip Ridge Length. Hip Ridge Length = Building Length – Building Width. Building Length. Hip. Hip. Hip ridge length is found by subtracting. Building Width. Ridgeboard. Hip. Hip. Plan View. Hip Ridge Length. - PowerPoint PPT PresentationTRANSCRIPT
1
Presentation 22:
HIP RIDGE THEORY AND LENGTHENING
2
Hip Ridge Length
Plan View
Building Length
Bui
ldin
g W
idth
Ridgeboard
Hip
HipHip
HipHip ridge length is
found by subtracting.
Hip Ridge Length = Building Length – Building Width
3
Hip Ridge Length
Plan View
Building Length
Bui
ldin
g W
idth
Ridgeboard
Hip
HipHip
Hip
If a building is 28′ x 64′, the ridgeboard is …
64 – 28 = 36′
4
Therefore the common runs are equal.
Hip Ridge Length
This works because hip run is at a 45° angle with common run.
45°45°
5
Hip Ridge Length
45°45°
Thus adding two of them will equal the Building Width.
6
Hip Ridge Length
45°45°
Thus adding two of them will equal the Building Width.
7
Hip Ridge Length
45°45°
Thus adding two of them will equal the Building Width.
Length minus Width equals Ridge Length.
8
There are two styles of framing hips at the ridge.
Framing Methods
Ridge
Com
mon
Hip
Hip
Com
mon
Common
Hip
Hip
Com
mon
Com
mon
9
One where a common rafter butts the ridge.
Another with no common abutting the ridge.
Framing Methods
Ridge
Com
mon
Hip
Hip
Com
mon
Common
Hip
Hip
Com
mon
Com
mon
10
The subtraction that yields the ridge length is theoretical.
Actual Ridge Length
Actual length is longer
Theoretical Length
The amount of lengthening depends on framing style
11
¾″ longer when a common rafter butts the ridge.
Actual Ridge Length
¾″
1 13/16″ longer when no common rafter exists.
12
¾″ longer when a common rafter butts the ridge.
Actual Ridge Length
¾″
1 13/16″ longer when no common rafter exists.
¾″
1 1/16″
A total of 1 13/16″
13
Conclusions
• Theoretical hip ridge length is found by subtracting building width from building length.
• Ridge length is actually longer.
• Add ¾″ when a common rafter butts the ridge.
• Add 1 13/16″ when no common exists.