process connector€¦ · · 2017-08-31process connector armonicos co., ltd. [import/export] 1....
TRANSCRIPT
[Import/Export] 1. Supported 3D CAD Format Version Enhancements P3
[Enhancements] 2. Check Surface Deformation [New] P4 3. Modify Concave Fillet [New] P5 4. Check Undercut [New] P6
5. Deform Center [New] P7 6. Check Interference [New] P8 7. Feature Recognition *Gap [New] P9 *Collectively change color P10 8. Fillet Pane *Fillet/Blend Display List P11 9. View Operation *SOLIDWORKS, Creo, Inventor support P11 10. Compare Models *Polygon Mesh support P12
2018.1 Upgrade Details
Note: All brand and product names are trademarks or registered trademarks of their respective holders.
3 spGate 2018.1 Upgrade News
[Import/Export] 1. Supported 3D CAD Format Version Enhancements
CATIA V5 NX Creo
Parasolid ACIS
STEP IGES
Alias
Rhino
SolidWorks JT
spGate
2018.1
CATIA V5
Parasolid ACIS
STEP
IGES Alias
Rhino spScan
JT spGauge
STL OBJ
STL
OBJ
Maya CAM-TOOL
spGateViewer
op op
op
V5-6R2017(R27)
2017 1.0
2017 1.0
29.0
2017
V5-6R2017(R27)
11
2017.1
3D CAD
SolidWorks Reader and
JT Reader/Writer require
optional licenses. op
Enhanced Latest version
supported in this
upgrade.
Ver. No.
Imp
ort
Exp
ort
spScan
2016.1 - 2017.1
4 spGate 2018.1 Upgrade News
[Enhancement] 2. Check Surface Deformation
You can now indicate the direction and check for surface deformation. [Menu Bar: Advanced Tools/Check Surface Deformation]
X Direction
Y Direction
For Reference: Below is the result of using the former “Curvature” checking tool in the Polygon Mode.
New
5 spGate 2018.1 Upgrade News
As a measure to cope with incomplete cutting of concave fillets, two features to modify concave fillet have been introduced. [Menu Bar: Advanced Tools/Modify Concave Fillet]
[1] Offset
[2] Deform Fillet
Red: Free edges
Comparing before and after the modification
New [Enhancement] 3. Modify Concave Fillet
Concave fillets are recognized and selected automatically. You could also select concave fillets by changing their color beforehand.
R10
Incomplete
cutting
Modify Concave Fillet: Offset Method
R10.2
Difference in level.
Modify Concave Fillet: Deform Fillet Method
No difference in level. ≒R9.8
6 spGate 2018.1 Upgrade News
Automatically determine the direction without undercut in reference to the sheet geometry. [Menu Bar: Advanced Tools/Check Undercut]
Check the existence of undercut in the specified direction.
New [Enhancement] 4. Check Undercut
Area ratio between faces with undercut vs entire faces. Total number of faces with undercut. Zoom into each face with undercut.
7 spGate 2018.1 Upgrade News
[Enhancement] 5. Deform Center
Move the center of the geometry sheet in the Z+ direction and modify the entire shape of the model. [Menu Bar: Advanced Tools/Deform Center]
New
①Indicate the profile to lock
Anchored profile
Moving position
②Indicate the moving position and modify
Comparison of the model before and after deforming the center.
8 spGate 2018.1 Upgrade News
Examine interference and/or collision between multiple parts. [Menu Bar: Advanced Tools/Check Interference]
Red: Interference
Yellow-Green: Collision
New [Enhancement] 6. Check Interference
9 spGate 2018.1 Upgrade News
7-1. Gap Added "Gap" function to the Feature Recognition series. [Menu Bar: Advanced Tools/Feature Recognition/Gap]
New [Enhancement] 7. Feature Recognition
10 spGate 2018.1 Upgrade News
7-2. Change the Face Color at Once You can now change the face colors all at once in all the commands in the Feature Recognition series.
All the faces with the same color as the picked color will be configured as concave fillets.
Use for selection of concave fillets.
Use SHIFT key, and CTRL key.
[Enhancement] 7. Feature Recognition
11 spGate 2018.1 Upgrade News
[Enhancement] 9. View Operation
Double click an item on the list to zoom in.
[Enhancement] 8. Fillet Pane
In the fillet removal mode, now you can see Fillet and Blend in the list.
Use this function to review the remaining fillet and blend faces, after automatic
fillet removal.
Mouse view operation types now include [SOLIDWORKS], [Creo], and [Inventor].
12 spGate 2018.1 Upgrade News
CATPart, STEP, etc.
STL
Example 1) Compare metal mold model and machining simulation result.
→Review the unmachined corner part.
Example 2) Compare results of different simulation model.
→Review differences between analytic models.
STL
STL
Can also be used for reviewing
electrode creation part.
[Enhancement] 10. Compare Models
Now you can specify STL as the source (Src.) or target (Tgt.) in the Compare
Models mode.