product manual trio-5.8/7.5/8.5-tl-outd (5.8 to 8.5 kw)

Click here to load reader

Post on 20-Jan-2017

229 views

Category:

Documents

3 download

Embed Size (px)

TRANSCRIPT

  • ABB solar inverters

    Product manualTRIO-5.8/7.5/8.5-TL-OUTD(5.8 to 8.5 kW)

  • - 2 -

    0003

    14DG

    IMPORTANT SAFETY INSTRUCTIONSThis manual contains important safety instructions that must be followed during installation and maintenance of the equipment.

    Operators are required to read this manual and scrupulously follow the indications reported in it, since ABB cannot be held responsible for damages caused to people and/or things, or the equipment, if the warranty conditions are not observed.

  • - 3 -

    0003

    14DG

    Product Manual

    TRIO-5.8/7.5/8.5 string inverters

    1 - Introduction and general information

    2 - Characteristics

    3 - Safety and accident prevention

    4 - Lifting and transport

    5 - Installation

    6 - Instruments

    7 - Operation

    8 - Maintenance

    TRIO-5.8_7.5_8.5-TL-OUTD-Product manual EN Rev D (M000018DG)EFFECTIVE 04/12/2014

    Copyright 2014 ABB. All Rights Reserved.

  • - 4 -

    0000

    02EG

    Warranty and Supply ConditionsThe warranty conditions are considered to be valid if the customer adhe-res to the indications in this manual; any conditions deviating from those described herein must be expressly agreed in the purchase order.

    The equipment complies with the pertinent legislation currently in force in the country of in-stallation and it has issued the corresponding declaration of conformity.

    Not included in the supplyABB accepts no liability for failure to comply with the instructions for correct installation and will not be held responsible for systems upstream or downstream the equipment it has supplied.It is absolutely forbidden to modify the equipment. Any modification, manipulation, or alteration not expressly agreed with the manufacturer, concerning either hardware or software, shall re-sult in the immediate cancellation of the warranty.The Customer is fully liable for any modifications made to the system.

    Given the countless array of system configurations and installation envi-ronments possible, it is essential to check the following: sufficient space suitable for housing the equipment; airborne noise produced depending on the environment; potential flammability hazards.

    ABB will NOT be held liable for defects or malfunctions arising from: im-proper use of the equipment; deterioration resulting from transportation or particular environmental conditions; performing maintenance incor-rectly or not at all; tampering or unsafe repairs; use or installation by unqualified persons.

    ABB will NOT be held responsible for the disposal of: displays, cables, batteries, accumulators etc. The Customer shall therefore arrange for the disposal of substances potentially harmful to the environment in accor-dance with the legislation in force in the country of installation.

    1Introduction and general information

  • - 5 -

    0003

    15DG

    1- Introduction and general information

    Contents

    Introduction and general information ............................................................................................... 4Warranty and Supply Conditions ..........................................................................................................4

    Not included in the supply .......................................................................................................4Contents ..................................................................................................................................................5Reference number index .......................................................................................................................8Graphical representation of references ...............................................................................................8The document and who it is for ...........................................................................................................9

    Purpose and structure of the document .................................................................................9List of annexes .......................................................................................................................9Staff characteristics .................................................................................................................9

    Symbols ad signs .................................................................................................................................10Field of use, general conditions ........................................................................................................11

    Intended or allowed use ........................................................................................................11Limits in field of use ...............................................................................................................11Improper or prohibited use ...................................................................................................11

    Characteristics ................................................................................................................................. 12General conditions ...............................................................................................................................12Models and range of equipment .........................................................................................................13

    Identification of the equipment and the manufacturer ..........................................................14Inverter Composition ...........................................................................................................................16

    5.8kW Standard / -S Version ................................................................................................167.5kW and 8.5kW Standard / -S Version ..............................................................................17

    Accessory components (installable on the inverter) .......................................................................18Wifi Logger Card accessory card .......................................................................................18ETHERNET Expansion Board accessory board ................................................................19PMU Expansion Board accessory board ...........................................................................19

    Characteristics and technical data .....................................................................................................20Tightening torques ................................................................................................................22Overall dimensions ...............................................................................................................22Bracket dimensions ...............................................................................................................23

    Efficiency curves ..................................................................................................................................24Power derating ......................................................................................................................................25

    Power derating due to environmental conditions .................................................................26Power reduction due to the input voltage .............................................................................26

    Characteristics of a photovoltaic generator ......................................................................................27Strings and Arrays .................................................................................................................27

    Description of the equipment ..............................................................................................................28Operating diagram ................................................................................................................28Connection of several inverters together ..............................................................................29Notes on the sizing of the system .........................................................................................29Functionality and components of the equipment .................................................................30Topographic diagram of the equipment ................................................................................32

    Safety devices .......................................................................................................................................34Anti-Islanding ........................................................................................................................34Ground fault of the photovoltaic panels ................................................................................34Other safety devices .............................................................................................................34

  • - 6 -

    0003

    15DG

    1- Introduction and general information

    Safety and accident prevention ..................................................................................................... 35Safety instructions and general information ....................................................................................35Hazardous areas and operations .......................................................................................................36

    Environmental conditions and risks ......................................................................................36Signs and Labels ................................................................................................................