project: date: to: re: attn: job: we are …pix.ghphipps.com/projects/2015/15.0732/projdocs/06 -...

16D5292-0108No.

DAO Architecture3843 W 73rd Ave Westminster CO 80030

TO:

02/08/2016DATE:

220000-PlumbingRE:

Dan OrecchioATTN:

Shop Drawings

Letter

Prints

Change Order

Plans

Samples

Specifications / Product Data

Other:

Approval

Your Use

As Requested

Review and Comment

Attached

Separate Cover Via:

Approved as Submitted

Approved as Noted

Returned After Loan

Resubmit

Submit

Returned

Returned for Corrections

Due Date: 02/18/2016

WE ARE SENDING: SUBMITTED FOR:

SENT VIA:

ACTION TAKEN:

TRANSMITTAL

James GettmanSigned:

PROJECT: ACSD50-Flynn Elementary HVAC Upgrade & Addition

02/08/2016

Date

222000.01

Code

Plumbing Systems

Description

Architect Review

Status

JOB: 16D5292

CC:

Item

Submittal 220000

Package

1

Rev. Copies

Ph/Fax: 720-273-0431

NOTES:

5995 Greenwood Plaza Blvd.Suite 100Greenwood Village, CO 80111-4710303-571-5377303-629-7467 (fax)

Submittal Cover Sheet

Project Name Flynn ES

Project Number 16D5292

Date 2-8-16

Architect DAO Architecture

Contractor GH Phipps Construction Companies

Prepared by/Subcontractor Central Mechanical

Supplier

Manufacturer

Submittal Number 222000.01 Plumbing Systems

Specification Section 222000

Drawing Number/Location

Contractor Review

A/E Review:

Contractor Notes:

HB-1 HOSE BIBB

Job Name ________________________________________________

Item Number _____________________________________________

Section/Tag ______________________________________________

Model Specified ___________________________________________

Architect _________________________________________________

Engineer _________________________________________________

Contractor ________________________________________________

[ ] Submitted as Shown [ ] Submitted with Variations

Date _____________________________________________________

MECHANICAL FAUCETS

952-CPWashdown and Sill

Product Type___________________________________________________Wall Mounted Sill Fittings Inside Sill Fitting

Features & Specifications___________________________________________________• Sill Fittings• 2-1/4" Tee Handle• Slow Compression Operating Cartridge• 3/4" NPT Female Thread Inlet• Atmospheric Vacuum Breaker, Not Intended for Continuous PressureApplications• Atmospheric Vacuum Breaker, Not Intended for Continuous PressureApplications• CFNow! Item Ships in 3 Days

Performance Specification___________________________________________________• Rated Operating Pressure: 20-125 PSI• Rated Operating Temperature: 40-140ºF

Warranty___________________________________________________• Lifetime Limited Faucet Warranty• 5-Year Limited Cartridge Warranty• 1-Year Limited Finish Warranty

Codes & Standards___________________________________________________• ASME A112.18.1/CSA B125.1

Last Revision: 10/17/2014 • Date Printed: 11/23/2015 • Product specifications subject to change without notice

2100 South Clearwater DriveDes Plaines, IL

P: 847/803-5000F: 847/803-5454

Technical: 800/TEC-TRUEwww.chicagofaucets.com

JGettman

Type g Frame

g 1

952-CPWashdown and Sill

Architect/Engineer Specification________________________________________________________________________________________________________Chicago Faucets No. 952-CP, Inside Sill Fitting, wall-mounted, chrome plated. 2-1/4" metal tee handle with square, tapered broach. Slowcompression rebuildable cartridge, opens and closes 360º for fine adjustment, closes with water pressure, features square, tapered stem. 3/4" NPTfemale thread inlet. NOTE: Atmospheric vacuum breaker is NOT intended for continuous pressure applications..

Operation and Maintenance________________________________________________________________________________________________________Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove spout outlet orflow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the product. Do not use abrasive cleaners,chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and protecting the life of Chicago Faucetproducts. For specific operation and maintenance refer to the installation instructions and repair parts documents that are located at www.chicagofaucets.com.

Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States, offering a completerange of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities. Call 1.800.TECTRUE or1.847.803.5000 Option 1 for installation or other technical assistance.



P: 847/803-5000F: 847/803-5454


http://www.chicagofaucets.com

WH-1 WALL HYDRANT

��

�

�� !"#�$��%��&�'�())��$�*�'+,��-.��+/�� !0*�('�-��/+)'��"1��21��3*��44456��$5#�7

��

��

��

�� !��"�� #��#$� �!%�"%&'�!$� ��(�%�� %!%!�$� !�!�)��*�� ##� '+��!� ��(&#�� %'%!��#�,��-)#��&��!��$��&&��"%!�$��##�,��!*��%!��%��&��"$�!�!��!%!��&��%!��%'�)��)#��%!��(&��""%�!��#�"��#��$��!��(,%!�%�!��.�/ �0�)�(�#��"�#��!��.�/ �0�(�#��&%&��'��%!#��!!��%�!�"�!��#��#+�)��!%"'��%'��.�/ �0�'�"��!!��%�!��'��(��&#�� '� ��"� ,��!*�� ,�1� �!�� '%!�� 2!�#��"�&��%!��-�+�

��

��3333 ��. 4 ��.�/ �0��5�6�#��2!#�� #,��3333 ��4 �+#%!��4��-3333 ��7 ��(,%!�%�!��.�/ �0�8�(�#��%&��9'��!�� /��0�:�#��%&��9'��!!��%�!3333 �� #%"'��%�-�#��!*��8%!%"'3333 �� #%"'��!*��8%!%"'3333 ��;� ��/��0�<�##��;""�(,#+��%'��&�%��=%�>��=?3333 ��;. �.�/� �0�<�##��;""�(,#+��%'��&�%��=%�>��=?3333 ��= @+��!��"��&�%��=%3333 �66 6�%!#�""�6��#�8%!%"'3333 �<� <�##��#�(&

U PC

R

�� / ��0 � /�0

�� .� � /��.��.��0 � /�0

��. /.�A�� 0 � /.0

;&&��1�<��4,"�/-�0

<�##9'%�-!�""�2!

2!�'�"

'�'.+�

IMB-1 ICE MAKER BOX

696-1010MF

Create Item Number

696 SERIES

SPECIFICATIONSioux Chief 696 series OxBox ¼" compression outlet connection outlet box shall be used where necessary in plumbing supply systems. Box shall allow for mounting with supply line from top or bottom, on-stud or between studs. Unit shall be available with plain valve or valve and water hammer arrester. Arrester shall be certified to ASSE 1010 and shall be UPC listed. Metal support bracket shall install into top track of box for between stud configuration. Outlet connection shall be generally ¼".

MATERIALS Outlet box: ABS Frame: ABS Bracket: galvanized steel Arrester body: stainless steel Piston: polypropylene with two EPDM o-rings Piston lubrication: Dow-Corning, 111 FDA approved silicone compound Valve body: chrome-plated forged brass

VALVE/ARRESTER WORKING LIMITS Working temp: : 250°F Testing air pressure: 100 PSIG Working/testing water pressure: 250 PSIG

DIMENSIONS

A: frame width 5¾" B: frame height 7¼" C: frame opening width 35 8" D: frame opening height 51 8" E: rough-in box inner width 4" F: rough-in box overall depth 3½" G: rough-in box inner height 5½" H: supply connection ½" nominal (see ‘C’ below)I: outlet connection ¼" compressionJ: bracket length 18" K: bracket width 5 8"

CERTIFICATIONS/APPROVALS Listed by UPC/IAPMO to meet UPCConforms to IPCValves meet ASME A112.18.1

OxBox™

696-G10A0BCe.g. 696-1010MF: ¼" compression outlet connection box, female sweat valve with arrester, packaged with frame

JK

A

C

BD

E

F

G

H

I

¼" ICE MAKER OUTLET BOX

F = standard pack (supply box, frame, bracket, debris cover)R = rough-in pack2 (supply box, bracket, debris cover)

¹Compliant with NSF-372 and California No Lead Plumbing Law2Order frame (696-1F) separately

M = ½" female sweatC = ½" male CPVCX = ½" PEX Crimp F1807W = ½" PEX Grip F1960V = ½" Viega PureFlow® PEXA = ½" PEX Lock F2080

FRAME PACKAGING CSUPPLY CONNECTION B0 = no arrester1 = with arrester

ARRESTER A

Sioux Chief Manufacturing Company | P: 1.800.821.3944 | F: 1.800.758.5950 | www.siouxchief.com 4-14

ITEM # SUBMITTED ��

JOB NAME ��

LOCATION ��

ENGINEER ��

CONTRACTOR ��

PO# �� TAG ��

TRAP SEALS

Contact: RectorSeal® 2601 Spenwick Drive, Houston, TX 713-263-8001 800-231-3345 713-263-7577 800-441-0051 rectorseal.comP F W

A CSW Industrials Company

P-J-15

Specification: SureSeal model SS2009V Waterless Inline 2" Drain Trap Seal. HDPE (High Density Poly Ethylene) housing with heavy duty proprietary silicone diaphragm and soft EPDM rubber sealing gasket. Floor rating ASSE 1072 AF GW.

Function: Installs into the outlet of drain bodies, or drain hubs to protect the trap seal from evaporation. Creates a physical barrier that blocks sewer gases and their odors from escaping. Provides waterless trap seal protection equivalent to water based trap primers. · New Construction: Used as a trap primer replacement or in conjunction with a trap primer to provide protection against escaping sewer gases.

Eliminates the need to repair/replace trap primers when they fail. · Retrofit: Used in situations where trap primers have failed or where trap primers were never installed.

Benefits: Simple to install, eliminates the need for complex, time consuming, and expensive repairs. ECO friendly providing 100% water savings efficiency over traditional methods.

ICC-ES Listed: PMG-1070 IAPMO Listed: C-4165 U.S. Patent 9,010363 Other Patent Pending

2.0050.80

2.2055.88

2.3559.69

.59

14.90

AA

PART MARKINGS ARE PERMANENTLYAFFIXED TO THE PART IN THE MOLDING PROCESS

5 REF

1 REF 6 REF

2.1053.34

1.7644.83

1.8145.91

1.3033.05

SECTION A-A

213 6

4

5

REVISIONS

ZONE REV. DESCRIPTION DATE APPROVED

N/A A00 RELEASED FOR PRODUCTION 10/16/2013 DFC

ITEM NO. PART NUMBER DESCRIPTION QTY.

1 2-400-004 2IN SHIELD 1

2 2-400-001 2 IN HOUSING 1

3 2-400-005 2IN FLAPPER 1

4 2-400-002 2 INCH RETAINER CLIP 1

5 2-400-015 2IN MEMBRANE 1

6 2-400-006 2IN UNIVERSAL GASKET 1

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 2 1

SH 1 OF 1CAD FILE: SolidWorksSCALE: NONE

SIZE REV.

B A00

APPROVALSDATEDRAWN

CHECKED

MATERIAL

FINISH

3

DIMENSIONS ARE IN INCHESTOLERANCES:PER RMA "A3" COMMERCIALUNLESS OTHERWISE SPECIFIED

UNLESS OTHERWISE SPECIFIED:

2IN VENTED ASSY

2-400-100

N/A

N/A

SureSeal Manufacturing1614 South Mildred StreetSuite 12Tacoma, WA 98465 USA

(877) 201-2663 Toll-Free

PART NO

DESCRIPTION

DFC

DH 22 - JUL - 2013DATE

PROPRIETARY AND CONFIDENTIAL: THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SURE SEAL MANUFACTURING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF SURE SEAL MANUFACTURING IS PROHIBITED.

THIRD ANGLE PROJECTION

22 - JUL - 2013

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

Strainer

Floor

Drain Outlet

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

Strainer

Floor

Drain Outlet

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

BE

FO

RE

AF

TE

R

2" SureSeal®MODEL #SS2009V

INLINE FLOOR DRAIN TRAP SEALER

The Green Solution

2.0050.80

2.2055.88

2.3559.69

.59

14.90

AA


5 REF

1 REF 6 REF

2.1053.34

1.7644.83

1.8145.91

1.30

33.05

SECTION A-A

213 6

4

5

REVISIONS




1 2-400-004 2IN SHIELD 1

2 2-400-001 2 IN HOUSING 1

3 2-400-005 2IN FLAPPER 1


5 2-400-015 2IN MEMBRANE 1


D

C

B

AA

B

C

D

12345678

8 7 6 5 4 2 1


SIZE REV.

B A00

APPROVALSDATEDRAWN

CHECKED

MATERIAL

FINISH

3



2IN VENTED ASSY

2-400-100

N/A

N/A


(877) 201-2663 Toll-Free

PART NO

DESCRIPTION

DFC




22 - JUL - 2013

HOUSING (NO GASKET)

2.0050.80

2.2055.88

2.3559.69

.59

14.90

AA


2.1053.34

1.7644.83

1.8145.91

1.30

33.05

SECTION A-A

2.0050.80

2.2055.88

2.3559.69

.59

14.90

AA


2.1053.34

1.7644.83

1.8145.91

1.30

33.05

SECTION A-A

2.0050.80

2.2055.88

2.3559.69

.59

14.90

AA


5 REF

1 REF 6 REF

2.1053.34

1.7644.83

1.8145.91

1.30

33.05

SECTION A-A

213 6

4

5

REVISIONS




1 2-400-004 2IN SHIELD 1

2 2-400-001 2 IN HOUSING 1

3 2-400-005 2IN FLAPPER 1


5 2-400-015 2IN MEMBRANE 1


D

C

B

AA

B

C

D

12345678

8 7 6 5 4 2 1


SIZE REV.

B A00

APPROVALSDATEDRAWN

CHECKED

MATERIAL

FINISH

3



2IN VENTED ASSY

2-400-100

N/A

N/A


(877) 201-2663 Toll-Free

PART NO

DESCRIPTION

DFC




22 - JUL - 2013

HOUSING (NO GASKET)

Contact: RectorSeal® 2601 Spenwick Drive, Houston, TX 713-263-8001 800-231-3345 713-263-7577 800-441-0051 rectorseal.comP F W A CSW Industrials Company

P-J-15

Specification: SureSeal model SS3009V Waterless Inline 3" Drain Trap Seal. HDPE (High Density Poly Ethylene) housing with proprietary heavy duty silicone diaphragm and soft EPDM rubber sealing gasket. Floor rating ASSE 1072 AF GW.

Function: Installs into the outlet of drain bodies, or drain hubs to protect the trap seal from evaporation. Creates a physical barrier that blocks sewer gases and their odors from escaping. Provides waterless trap seal protection equivalent to water based trap primers. · New Construction: Used as a trap primer replacement or in conjunction with a trap primer to provide protection against escaping sewer gases.



3.2382

2.7670

2.9073.75

.75

19.05

AA

2.9274.12

1.5238.64

2.6968.43

2.7569.85

SECTION A-A

1

5

46

3 2

REVISIONS



ITEM NO. PART NUMBER DESCRIPTION QTY.1 3-400-001 3 INCH BODY 12 3-400-004 3IN SHIELD 13 3-400-005 3IN FLAPPER 14 3-400-015 3IN MEMBRANE 15 3-400-006 3IN UNIVERSAL GASKET 16 3-400-002 3 INCH RETAINER CLIP 1

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 2 1


SIZE REV.

B A00

APPROVALSDATEDRAWN

CHECKED

MATERIAL

FINISH

3



3IN ASSY

3-400-100

N/A

N/A


(877) 201-2663 Toll-Free

PART NO

DESCRIPTION

DFC




22 - JUL - 2013

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

Strainer

Floor

Drain Outlet

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

Strainer

Floor

Drain Outlet

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

BE

FO

RE

AF

TE

R


3" SureSeal® MODEL #SS3009V


The Green Solution

3.2382

2.7670

2.9073.75

.75

19.05

AA

2.9274.12

1.52

38.64

2.6968.43

2.7569.85

SECTION A-A

1

5

46

3 2

REVISIONS




D

C

B

AA

B

C

D

12345678

8 7 6 5 4 2 1


SIZE REV.

B A00

APPROVALSDATEDRAWN

CHECKED

MATERIAL

FINISH

3



3IN ASSY

3-400-100

N/A

N/A


(877) 201-2663 Toll-Free

PART NO

DESCRIPTION

DFC




22 - JUL - 2013

HOUSING (NO GASKET) HOUSING & GASKET

3.2382

2.7670

2.9073.75

.75

19.05

AA

2.9274.12

1.52

38.64

2.6968.43

2.7569.85

SECTION A-A

1

5

46

3 2

REVISIONS




D

C

B

AA

B

C

D

12345678

8 7 6 5 4 2 1


SIZE REV.

B A00

APPROVALSDATEDRAWN

CHECKED

MATERIAL

FINISH

3



3IN ASSY

3-400-100

N/A

N/A


(877) 201-2663 Toll-Free

PART NO

DESCRIPTION

DFC




22 - JUL - 2013

3.2382

2.7670

2.9073.75

.75

19.05

AA

2.9274.12

1.5238.64

2.6968.43

2.7569.85

SECTION A-A

3.2382

2.7670

2.9073.75

.75

19.05

AA

2.9274.12

1.5238.64

2.6968.43

2.7569.85

SECTION A-A

Contact: RectorSeal® 2601 Spenwick Drive, Houston, TX 713-263-8001 800-231-3345 713-263-7577 800-441-0051 rectorseal.comP F W

A CSW Industrials Company

P-J-15

Specification: SureSeal model SS3509V Waterless In-line 3.5" Drain Trap Seal. HDPE (High Density Poly Ethylene) housing with proprietary EPDM rubber diaphragm and soft rubber sealing gasket. Floor rating ASSE 1072 AF GW.

Function: Installed into drain strainers or drain hubs to protect the trap seal from evaporation. Creates a physical barrier that blocks sewer gases and their odors from escaping. Provides waterless trap seal protection equivalent to water based trap primers. · New Construction: Used as a trap primer replacement or in conjunction with a trap primer to provide protection against escaping sewer gases.



AA

SECTION A-A

1 2

36

5

4

3.7595.25

3.5590.17

.85

21.50

2.7569.81

2.6968.43

.73

18.50

3.14

79.74

REVISIONS



ITEM NO. PART NUMBER DESCRIPTION QTY.1 SSM5-105 3.5 INCH GASKET 1

2 35-400-001 3.5IN HOUSING 1

3 3-400-015 3IN MEMBRANE 1

4 3-400-004 3IN SHIELD 1

5 3-400-005 3IN FLAPER 1


D

C

B

AA

B

C

D

12345678

8 7 6 5 4 2 1


SIZE REV.

B A00

APPROVALSDATEDRAWN

CHECKED

MATERIAL

FINISH

3



3.5IN VENTED ASSY

35-400-100

N/A

N/A


(877) 201-2663 Toll-Free

PART NO

DESCRIPTION

DFC




22 - JUL - 2013

BE

FO

RE

AF

TE

R

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

Strainer

Floor

Drain Outlet

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

FloorDrain Outlet

SureSeal

Strainer

FloorA B


3.5" SureSeal®MODEL #SS3509V


The Green Solution

AA

SECTION A-A

1 2

36

5

4

3.7595.25

3.5590.17

.85

21.50

2.7569.81

2.6968.43

.73

18.50

3.1479.74

REVISIONS




2 35-400-001 3.5IN HOUSING 1

3 3-400-015 3IN MEMBRANE 1

4 3-400-004 3IN SHIELD 1

5 3-400-005 3IN FLAPER 1


D

C

B

AA

B

C

D

12345678

8 7 6 5 4 2 1


SIZE REV.

B A00

APPROVALSDATEDRAWN

CHECKED

MATERIAL

FINISH

3



3.5IN VENTED ASSY

35-400-100

N/A

N/A


(877) 201-2663 Toll-Free

PART NO

DESCRIPTION

DFC




22 - JUL - 2013

HOUSING & GASKETHOUSING (NO GASKET)

AA

SECTION A-A

1 2

36

5

4

3.7595.25

3.5590.17

.85

21.50

2.7569.81

2.6968.43

.73

18.50

3.14

79.74

REVISIONS




2 35-400-001 3.5IN HOUSING 1

3 3-400-015 3IN MEMBRANE 1

4 3-400-004 3IN SHIELD 1

5 3-400-005 3IN FLAPER 1


D

C

B

AA

B

C

D

12345678

8 7 6 5 4 2 1


SIZE REV.

B A00

APPROVALSDATEDRAWN

CHECKED

MATERIAL

FINISH

3



3.5IN VENTED ASSY

35-400-100

N/A

N/A


(877) 201-2663 Toll-Free

PART NO

DESCRIPTION

DFC




22 - JUL - 2013

AA

SECTION A-A

Contact: RectorSeal® 2601 Spenwick Drive, Houston, TX 713-263-8001 800-231-3345 713-263-7577 800-441-0051 rectorseal.comP F W A CSW Industrials Company

P-J-15

Specification: SureSeal model SS4009V Waterless Inline 4" Drain Trap Seal. HDPE (High Density Poly Ethylene) housing with heavy duty silicone proprietary diaphragm and soft EPDM sealing gasket. Floor rating ASSE 1072 AF GW.

Function: Installs into the outlet of drain bodies, drain strainers, or drain hubs to protect the trap seal from evaporation. Creates a physical barrier that blocks sewer gases and their odors from escaping. Provides waterless trap seal protection equivalent to water based trap primers. · New Construction: Used as a trap primer replacement or in conjunction with a trap primer to provide protection against escaping sewer gases.



AA


6

5

2 REF

REF

REF

SECTION A-A

1

6

5

32

4

110.134.34

104.924.13

103.714.08

82.483.25

30.471.20

28.951.14

81.543.21

REVISIONS



ITEM NO. PART NUMBER DESCRIPTION QTY.1 4-400-001 4 INCH HOUSING 1

2 4-400-004 4IN SHIELD 1

3 3-400-005 3IN FLAPPER 1


5 4-400-015 4IN MEMBRANE 1

6 4-400-006 4 INCH GASKET 1

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 2 1


SIZE REV.

B A00

APPROVALSDATEDRAWN

CHECKED

MATERIAL

FINISH

3



4IN VENTED ASSY

4-400-100

N/A

N/A


(877) 201-2663 Toll-Free

PART NO

DESCRIPTION

DFC

DH 03 - OCT - 2013DATE



03 - OCT - 2013

HOUSING (NO GASKET)

AA


6

5

2 REF

REF

REF

SECTION A-A

1

6

5

32

4

110.134.34

104.924.13

103.714.08

82.483.25

30.471.20

28.951.14

81.543.21

REVISIONS




2 4-400-004 4IN SHIELD 1

3 3-400-005 3IN FLAPPER 1


5 4-400-015 4IN MEMBRANE 1

6 4-400-006 4 INCH GASKET 1

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 2 1


SIZE REV.

B A00

APPROVALSDATEDRAWN

CHECKED

MATERIAL

FINISH

3



4IN VENTED ASSY

4-400-100

N/A

N/A


(877) 201-2663 Toll-Free

PART NO

DESCRIPTION

DFC




03 - OCT - 2013

HOUSING & GASKET

AA


6

5

2 REF

REF

REF

SECTION A-A

1

6

5

32

4

110.134.34

104.924.13

103.714.08

82.483.25

30.471.20

28.951.14

81.543.21

REVISIONS




2 4-400-004 4IN SHIELD 1

3 3-400-005 3IN FLAPPER 1


5 4-400-015 4IN MEMBRANE 1

6 4-400-006 4 INCH GASKET 1

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 2 1


SIZE REV.

B A00

APPROVALSDATEDRAWN

CHECKED

MATERIAL

FINISH

3



4IN VENTED ASSY

4-400-100

N/A

N/A


(877) 201-2663 Toll-Free

PART NO

DESCRIPTION

DFC




03 - OCT - 2013

BE

FO

RE

AF

TE

R

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

Strainer

Floor

Drain Outlet

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

Strainer

Floor

Drain Outlet

SureSeal

Strainer

Floor

Drain Outlet

SureSeal

Strainer

FloorDrain Outlet

SureSeal

Strainer

FloorA B


4" SureSeal® MODEL #SS4009V


The Green Solution

SECTION A-A

AA

PART MARKINGS ARE PERMANENTLYAFFIXED TO THE PART IN THEMOLDING PROCESS

TMV-1 THERMOSTATIC MIXING VALVE

HYDROGUARD® Series LFLM495 Thermostatic Mixing Valves for Lavatory Installations

ES-P-LFLM495

Product Specification

powerscontrols.com

Union ConneCtions

Female NPT Sweat CPVC PEX Quick-Connect

1/2"(15)

3/4"(20)

1"

(25)

1/2"(15)

3/4"(20)

1"(25)

1/2"(15)

3/4"(20)

1"(25)

1/2"(15)

3/4"(20)

1"(25)

1/2"(15)

3/4"(20)

1"(25)

LFLM495-1 LFLM496-1 LFLM497-1 LFLM495-2 LFLM496-2 LFLM497-2 LFLM495-3 LFLM496-3 LFLM497-3 LFLM495-4 LFLM496-4 LFLM497-4 LFLM495-5 LFLM496-5 LFLM497-5

Specifications n

Temperature Adjustment:80°- 120°F (27°C to 49°C)

Approach Temperature: 5°F (3°C) above set point Check Valves: IntegralMax. Operating Pressure: 125psi (861 kPa) Construction: Lead Free* Cast copper silicon alloy bodyMax. Hot Water Temperature: 200°F (93°C) Listing: ASSE 1069, ASSE 1070, ASSE 1017 and

IAPMO cUPCMax. Pressure Differentialbetween Hot & Cold Water Supplies: 25%Minimum Flow: 0.5 gpm (1.90 lpm) when tested in accordance

with ASSE 1069, ASSE 1070 and ASSE1017

Advanced Thermal Activation

Features n

• Temperature control to ASSE 1069, 1070 and 1017 down to 0.5 gpm• Advanced thermal actuator improves performance at low flow• Lead Free* cast copper silicon alloy body construction for durability and to comply

with Lead Free* requirements• Adjustable temperature selection with lock down• Union connections for easy maintenance• Integral checks and screen prevents cross-flow and contamination• Available in 1/2", 3/4", 1" (15, 20, 25 mm) with NPT, Sweat, PEX, Quick-Connect, and

CPVC union connections

LEAD FREE*

Capacity n

PressUre DroP ACross the VAlVe

(CV) 1 psi(7 kPa)

5 psi(34 kPa)

10 psi(69 kPa)

15 psi(103 kPa)

20 psi(138 kPa)

30 psi(207 kPa)

45 psi(310 kPa)

60 psi(414 kPa)

1.794.0 gpm

(15.0 lpm)5.7 gpm

(22.0 lpm)7.0 gpm

(26.0 lpm)8.0 gpm

(30.0 lpm)9.8 gpm

(37.0 lpm)12.0 gpm(45.0 lpm)

13.9 gpm(53.0 lpm)

*T he wetted surface of this product contacted by consumablewater contains less than 0.25% of lead by weight.

When used in an ASSE 1017 application at the hot water source, the Powers Thermostatic Mixing Valve Series LFLM495 cannot be used by itself to control final tem-perature at fixtures where ASSE Standard 1016 or ASSE Standard 1070 listed devices are required. Such use may result in severe bodily injury (i.e. scalding or chilling) and/or death. ASSE Standard 1016, ASSE 1069 or ASSE Standard 1070 listed devices, such as Powers Series LFe480 or LFLM495, should be used at point-of-use to prevent pos-sible injury. Consult all product manuals, and instruction guides before installing any referenced product.

Recirculation systems should recirculate water at tempera-tures over 140°F to reduce the risk of bacterial growth in the piping. This valve should not be used at the hot water source in recirculation systems.

WARNING!

Dimensions n

Ordering Information n

Typical Specification n

ENGINEERING APPROVAL

Project:Contractor:Architect/Engineer:

Thermostatic tempering valve shall be constructed using Lead Free* cast copper silicon alloy material which shall comply with state codes and standards, where applicable requiring reduced lead content. The valve shall feature advanced paraffin-based actuation technology and union connections for ease of maintenance. All internal components shall be corrosion-resistant. Valve shall feature integral checks to prevent cross-flow and inlet screens to filter out debris. The valve shall be ASSE 1069, ASSE 1070, ASSE 1017 and IAPMO cUPC listed. Capacity of the valve shall be 12.0 gpm (45.0 lpm) at 45psi (310 kPa) differential. Valve shall perform to a minimum flow of 0.5 gpm (2 lpm) to ASSE 1070. Control temperature shall be adjustable between 80°F - 120°F (27 - 49°C). The valve shall feature a vandal-resistant lockable handle to prevent tampering. The valve shall be a Powers' HydroGuard® Model LFLM495 (1/2", 15mm), LFLM496 (3/4", 20mm), LFLM497 (1", 25mm). Any alternate must have a written approval prior to bidding.

Model LFLM495-1 LFLM496-1 LFLM497-1 LFLM495-2 LFLM496-2 LFLM497-2 LFLM495-3 LFLM496-3 LFLM497-3 LFLM495-4 LFLM496-4 LFLM497-4

Connections1/2" NPTFemale

3/4" NPTFemale

1" NPTFemale

1/2" Sweat 3/4" Sweat 1" Sweat 1/2" CPVC 3/4" CPVC 1" CPVC 1/2" PEX 3/4" PEX 1" PEX

"A"4-7/8

(124mm)4-7/8

(124mm)5-5/16

(135mm)4-13/16(123mm)

5-5/16(135mm)

5-13/16(148mm)

4-3/4(121mm)

5-1/4(133mm)

5-11/16(144mm)

5-1/4(133mm)

5-1/2(140mm)

5-7/8(149mm)

"B"5-7/16

(137mm)5-7/16

(137mm)5-5/8

(143mm)5-3/8

(137mm)5-5/8

(143mm)5-7/8

(149mm)5-5/16

(136mm)5-9/16

(142mm)5-13/16(147mm)

5-9/16(142mm)

5-11/16(145mm)

5-7/8(150mm)

"C"3-3/16(80mm)

3-3/16(80mm)

3-3/8(86mm)

3-1/8(80mm)

3-3/8(86mm)

3-5/8(92mm)

3-1/16(79mm)

3-5/16(85mm)

3-9/16(90mm)

3-5/16(85mm)

3-7/16(88mm)

3-5/8(93mm)

Model LFLM495-5 LFLM496-5 LFLM497-5

Connections 1/2"Quick-Connect

3/4"Quick-Connect

1"Quick-Connect

"A"6-5/8

(168mm)6-15/16(177mm)

7-1/8(181mm)

"B"6-1/4

(159mm)6-7/16

(163mm)6-1/2

(165mm)

"C"4

(102mm)4-3/16

(106mm)4-1/4

(108mm)

A

B

C

Hot Water Inlet

Tempered Outlet

Cold Water Inlet

Valve1/2" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

InletsUnion NPT Female . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1Union Sweat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Union CPVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Union PEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Quick-Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Model LFLM49(80°- 120°F) (27° - 49°C)

Note: Dimensions are shown ±1/4'' Dimensions in brackets are in mm

USA: Tel: (800) 669-5430 • Fax: (847) 229-0526 • powerscontrols.comCanada: Tel: (888) 208-8927 • Fax: (888) 479-2887 • powerscontrols.ca

Latin America: Tel: (52) 81-1001-8600 • powerscontrols.com

ES-P-LFLM495 1427 © 2014 Powers

A Watts Water Technologies Company

GAS PRESSURE REGULATOR

1800C and 1800C-HC Series Service Regulators

Technical Bulletin

Spring Range Part Number7.5 - 24“ W.C. 70017P123

20 - 32” W.C. 70017P124

24 - 44” W.C. 70017P125

40 - 84” W.C. 70017P126

3 - 5 PSIG 70017P127

4 - 7 PSIG 70017P128

1800C and 1800C-HC Series Service Regulators 02 Elster American Meter

General InformationOutlet pressures between 3.5" W.C. and 2 PSIG are available. Operating temperature range is -20°F to 150°F (-30°C to 65°C). Maximum flow rate is 2500 SCFH (70.8 m3/h).

All models conform to ANSI Code B109.4-1998, and CGA Service-Type Regu-lator Specification CAN/CGA-6.18-M95.

Features• Varietyofinterchangeableorifices and spring ranges

• 90Degree(RightAngle),180Degree (Straight-Flow),orOffsetValveBody (See photo below)

• Widerangeofvalvebody connection sizes

OptionsVentElbow The regulator vent opening should face downward (6 o'clock) to minimize the chance of blockage from ice and snow. If not possible, a 3/4" NPT plastic, 90° vent elbow (part number 78041P025) and separate protective screen (part number 70400P017) may be screwed into the vent to provide the necessary protection.

ElevationCompensation TheE.C.orificeisrecommendedforinstallations where the inlet pressure mayvaryoverawiderange.TheE.C.orifice is available in two sizes: 1/8" x 3/16" and 3/16". The capacities of these orifices are the same as the standard orifice of the same size.

The 1800C Series pressure regulators are designed to control natural gas, air, nitrogen, carbon dioxide, propane vapor, and other non-corrosive gases in residential, light commercial, and small industrial applications.

ApplicationsModel Number Description

1813C Basic regulator with full-capacity internal relief with 3/4" or 1" NPT vent.

1813C-HC Basic regulator with full-capacity internal relief with 3/4" or 1" NPT vent.

1843C Basic regulator with full-capacity internal relief and overpressure shut-off and 3/4" or 1" NPT vent.

1843C-HC Basic regulator with full-capacity internal relief and overpressure shut-off and 3/4" or 1" NPT vent.

1853C w/ USSA Basic regulator with full-capacity internal relief and overpressure, underpressure shut-off and 3/4" or 1" NPT vent.

1853C-HC w/ USSA Basic regulator with full-capacity internal relief and overpressure, underpressure shut-off and 3/4" or 1" NPT vent.

FullCapacityReliefValve Full capacity internal relief valve standard on all models. (See Performance Graphs on page 9)

Splashguards UVstabilized,weather-resistant,resindevice that protects the vent screen from

splashes while providing a large external vent opening to keep regulators working properly.

SafetyShutoffDevicesOverpressure Shutoff (OPSO) — Operates independently. The OPSO will shut off the gas supply in the event of a serious downstream pressure build-up. These are available in two pressure ranges on the Models 1843C and 1843C-HC.

When the outlet pressure exceeds the OPSO set point, the pressure under the OPSO diaphragm (A) compresses the pressure spring (B) forcing the diaphragm stem(E)upwardsandreleasingplunger(D).Thispermitstheshut-offspring(F)to force the shut-off disc (G) against the back side of the special double-ended orifice.

Spring Range Part Number14" W.C. to 35" W.C. 71403P005

1 PSIG to 3 1/2 PSIG 71403P004

Universal Safety Shutoff Assembly (USSA) — USSA protects the downstream piping from both over- and under-pressure conditions by shutting off the gas flow at the inlet side of the regulator orifice. Both Over- and under-pressure shut-off set points are adjustable depending on spring ranges selected.

USSA Shutoff Spring RangesOver Pressure Spring Ranges

Under Pressure Spring Ranges Spring Range Part Number

3 - 6“ W.C. 70017P133

6 - 24” W.C. 70017P134

24 - 60” W.C. 70017P135

Pressure Taps 1/8" NPT taps are available on most valve heads.

OffsetValveBody

A OPSODiaphragmPlate B Pressure Spring

C Cap D Plunger

E DiaphragmStem F Shut-off Spring

G Shut-offDisc H Adjusting Screw

C

E

B A

G

F

D

H

1800C and 1800C-HC Series Service Regulators 03 Elster American Meter

Material Specifications

Outlet Pressure

Color Code

Part Number

3.5" to 6" W.C. Blue 70017P043

3.5" to 7.5" W.C. Tan 70017P089

5.5" to 8.5" W.C. Yellow 70017P044

6" to 12" W.C. Brown 70017P137

6" to 15" W.C. Purple 70017P042

12" to 28" W.C. White 70017P060

24" to 48" W.C. Red 70017P082

42" W.C. to 2 PSIG Red - Red 70017P049

Orifice Size

Standard Part

NumberPart Number with OPSO

9/16" 72494P026 72751P019

1/2" 72494P025 72751P016

3/8" 72494P023 72751P014

5/16" 72494P022 72751P013

1/4" 72494P021 72751P012

3/16" 72494P020 72751P011

1/8" x 3/16" 72494P030 72751P020

1/8" 72494P019 N/A

1 Diaphragm Case - Precision die-cast aluminum with an exclusive seven-

step advanced conversion coating, single-coat polyester primer and high solids polyurethane top coat.

2 Valve Body - Cast grey iron, undercoated, single coat polyester primer and high solids polyurethane top coat. NPT threads meet ANSI/ ASME B1.20.1. BSP-TR threads meet BS EN 10226.

Available sizes: 3/4” x 3/4”, 3/4” x 1”, 3/4” x 1-1/4”, 1” x 1”, 1” x 1-1/4” and 1-1/4” x 1-1/4” NPT or BSP-TR

Offset valve body: 3/4” x 3/4”, 3/4” x 1” and 1” x 1” NPT or BSP-TR

3 Pressure Spring - Steel, zinc plated and yellow chromate. Color coded for identification.

4 Diaphragm Plate - Steel, Electrogalvanized.

5 Diaphragm - Buna N; Nylon fabric reinforced.

6 Seat Disc - Buna N; 60, 70 (std.) or 80 durometer rating.

7 Orifice Valve - High strength, corrosion resistant aluminum.

2

7 6

4 3

11

9

5 13

1

12

810

14

15

16

8 Lever - Stamped aluminum.

9 Seal Plug - Polyester thermoplastic UV stabilized.

10 Plunger Valve/Plunger Guide - Minlon.

11 Pressure Adjustment Screw - Minlon.

12 Relief Valve Stem - Minlon.

13 Vent Screen - Stainless Steel - All models are designed with a removable weather and bug-proof

stainless steel screen to resist freeze- ups and to exclude foreign matter.

The vent is threaded ¾” or 1” NPT (BSP-TR threads available). Inside installation requires a vent line of sufficient diameter to carry gas vented by the regulator to a safe outside location away from any opening(s) in the structure. Comply with applicable Federal, State and local codes.

14 Vent Valve - Stainless Steel with Electrogalvanized steel retainer.

15 Relief Valve Spring - Steel, zinc plated and yellow chromate. Color coded for identification. Non-adjustable, standard set point of 8" w.c. above outlet set pressure of 7" w.c. Standard set point of 1.3 PSIG above outlet set pressure of 2 PSIG.

16 Lever Pin - Carbon steel, zinc plated and yellow chromate.

VANDAL-PROOF VENT CAPS

REV. DATE DESCRIPTION BY CKD. BY

WEIGHTPOUNDS

VOLUMECUBIC FEET

FIGURE NUMBER

LOCATIONF

IGU

RE

NU

MB

ER

DIM

EN

SIO

NS

AR

E S

UB

JEC

T T

O M

AN

UFA

CT

UR

ER

S T

OLE

RA

NC

E A

ND

CH

AN

GE

WIT

HO

UT

NO

TIC

EW

E C

AN

AS

SU

ME

NO

RE

SP

ON

SIB

ILIT

Y F

OR

US

E O

F S

UP

ER

SE

DE

D O

R V

OID

DAT

A

DR

AW

N B

Y:

CH

EC

KE

D B

Y:

AP

PR

OV

ED

BY

:D

ATE

:S

CA

LE:

SIZ

E AD

RA

WIN

G N

UM

BE

R

ROOF ACCESSORYVENT CAP

VANDAL PROOF HOODED TYPE COUNTER FLASHING

FUNCTION: Recommended for all plumbing vents which terminate above the roof level. Unique vandal proof design eliminates thepossibility of sticks or other materials being either carelessly or maliciously placed in the vent openings, thus causing stoppage of the drainagesystem.

(Pipe Sizes) = 02(50), 03(75) or 04(100)

REGULARLY FURNISHED:Duco Cast Iron Dome Secured with Recessed AllenSocket Set Screws.

OPTIONAL MATERIALS:Galvanized Cast Iron -G

1748

1748

VG

DT

DT

D5-

24-8

5N

ON

ES

1748

F

Fig. 1748. . . VENT CAP

NOTE: Dimensions shown inparentheses are in millimeters.

E 6-16-99 Revised Millimeters CMDF 03/01/02 Deleted 1 1/2" optional pipe size JJ

BS

3 (76)

2 (51)

7 3/4 (195)

3 (76)

4 (100)

JAY R.SMITH MFG. CO.®

DIVISION OF SMITH INDUSTRIES, INC.POST OFFICE BOX 3237MONTGOMERY, ALABAMA 36109-0237 (USA)TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.comCUSTOMER

DRIVEN

SMITH®

MEMBER OF:

®

ASPE®

SANITARY

ENGINEERINGPrevention Rather Than C

ure

REV. DATE DESCRIPTION BY CKD. BY

WEIGHTPOUNDS

VOLUMECUBIC FEET

FIGURE NUMBER

LOCATIONF

IGU

RE

NU

MB

ER

DIM

EN

SIO

NS

AR

E S

UB

JEC

T T

O M

AN

UFA

CT

UR

ER

S T

OLE

RA

NC

E A

ND

CH

AN

GE

WIT

HO

UT

NO

TIC

EW

E C

AN

AS

SU

ME

NO

RE

SP

ON

SIB

ILIT

Y F

OR

US

E O

F S

UP

ER

SE

DE

D O

R V

OID

DAT

A

DR

AW

N B

Y:

CH

EC

KE

D B

Y:

AP

PR

OV

ED

BY

:D

ATE

:S

CA

LE:

SIZ

E AD

RA

WIN

G N

UM

BE

R ROOF ACCESSORYVENT CAP

VANDAL PROOF HOODED TYPE COUNTER FLASHINGFUNCTION: Recommended for all plumbing vents which terminate above the roof level. Unique vandal proof design eliminates thepossibility of sticks or other materials being either carelessly or maliciously placed in the vent openings, thus causing stoppage of the drainagesystem.

(Pipe Size) = 05 (125) or 06 (150)

REGULARLY FURNISHED:Duco Cast Iron Dome Secured with Recessed AllenSocket Set Screws.

OPTIONAL MATERIALS:Galvanized Cast Iron -G

1748BS

1748

BS

VG

DT

DT

D5-

24-8

5N

ON

ES

1748

BS

C

Fig. 1748. . . VENT CAP

B 7-1-94 Submittal Update EMBSBBS

C 6-26-96 Revised EMB

A 10-91 Revised drawing CMB

3 (76)

5 (125)

6 (150)

7 3/4 (195)

NOTE: Dimensions shown inparentheses are in millimeters.

JAY R.SMITH MFG. CO.®

DIVISION OF SMITH INDUSTRIES, INC.POST OFFICE BOX 3237MONTGOMERY, ALABAMA 36109-0237 (USA)TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.comCUSTOMER

DRIVEN

SMITH®

MEMBER OF:

®

ASPE®

SANITARY

ENGINEERINGPrevention Rather Than C

ure

WALL CLEANOUTS

*REGULARLY FURNISHED UNLESS OTHERWISE SPECIFIED

Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice

®

SPECIFICATION SHEET

TAG _______

ZURN INDUSTRIES, LLC. ♦♦♦♦♦ SPECIFICATION DRAINAGE OPERATION ♦♦♦♦♦ 1801 Pittsburgh Ave. ♦♦♦♦♦ Erie, PA 16514Phone: 814/455-0921 ♦♦♦♦♦ Fax: 814/454-7929 ♦♦♦♦♦ World Wide Web: www.zurn.com

In Canada: ZURN INDUSTRIES LIMITED ♦♦♦♦♦ 3544 Nashua Drive ♦♦♦♦♦ Mississauga, Ontario L4V1L2 ♦♦♦♦♦ Phone: 905/405-8272 Fax: 905/405-1292

OPTIONS (Check/specify appropriate options)

PIPE SIZE (Specify size/type) OUTLET2 thru 4-6 [51 thru 102-152] ____ NH No-Hub2 thru 6-8 [51 thru 152-203] ____ HB X SP Hub x Spigot

PREFIXES____ Z D.C.C.I. with Polished Stainless Steel Cover*____ ZB D.C.C.I. with Polished Bronze Cover

SUFFIXES____ -A Raised Head Plug____ -BP Bronze Plug____ -G Galvanized Cast Iron____ -SL Screws Longer Than 3-1/2 [89]____ -VP Vandal-Proof Screw

Z1446CLEANOUT W/ ROUND WALL ACCESS COVER

DWG. NO. 58767

REV. D

PRODUCT NO. Z1446

DATE: 11/04/10 C.N. NO. 120251

ENGINEERING SPECIFICATION: ZURN Z1446Cleanout Tee, Dura-Coated cast iron body, gas and watertight ABS tapered thread plug, and round, smooth stainless steel wallaccess cover with securing screw.

Dimensions In InchesApprox.Wt. Lbs.

[kg]A- Pipe Size

NH HB X SPB C D F B C D F

2 [51] 6-3/8 [162] 3-3/16 [81] 1-3/4 [44] 5 [127] 10 [254] 4-1/2 [114] 2-3/4 [70] 5 [127] 9 [4]

3 [76] 7-3/4 [197] 3-7/8 [98] 2-1/2 [64] 5 [127] 12 [305] 5-3/4 [146] 3 [76] 5 [127] 16 [7]

4 [102] 8-7/8 [225] 4-7/16 [113] 3 [76] 7 [178] 12 [305] 5-3/4 [146] 3-1/2 [89] 7 [178] 18 [8]

5 [127] 13 [330] 6-1/4 [159] 4 [102] 7 [178] 24 [11]

6 [152] 12-1/2 [318] 6-1/4 [159] 4-5/16 [110] 9 [229] 14 [356] 6-3/4 [171] 4-1/2 [114] 9 [229] 38 [17]

8 [203] 17 [432] 8-1/4 [210] 5-1/2 [140] 11 [279] 53 [24]

FD-1 FLOOR DRAIN


SPECIFICATION SHEET

TAG _______

* Regularly furnished unless otherwise specified.

Zurn Industries, LLC | Specification Drainage Operation1801 Pittsburgh Avenue, Erie, PA U.S.A. 16502 · Ph. 855-663-9876, Fax 814-454-7929In Canada | Zurn Industries Limited3544 Nashua Drive, Mississauga, Ontario L4V 1L2 · Ph. 905-405-8272, Fax 905-405-1292

www.zurn.com

ENGINEERING SPECIFICATION: ZURN ZN415BFloor and shower drain, Dura-Coated cast iron body with bottom outlet, combination invertible membrane clamp and adjustable collarwith seepage slots and "TYPE B" polished nickel bronze, light-duty strainer.


PIPE SIZE (Specify size/type) OUTLET 'E' BODY HT. DIM.2-3-4 [51-76-102] _____ IC Inside Caulk 3-7/8 [98]2-3-4 [51-76-102] _____ IG Inside Gasket 3-7/8 [98]2 [51] _____ IP Threaded 2-3/8 [60]3 [76] _____ IP Threaded 2-5/8 [67]4 [102] _____ IP Threaded 2-7/8 [73]6 [152] _____ IP Threaded 2-3/4 [70]2-3-4 [51-76-102] _____ NH No-Hub 3-7/8 [98]2-3-4 [51-76-102] _____ NL Neo-Loc 3-3/4 [95]PREFIXES

___ ZB D.C.C.I. Body Assembly w/ Polished Bronze Top___ ZN D.C.C.I. Body Assembly w/ Polished Nickel Bronze Top*

SUFFIXES___ -AA All Acid Resisting Epoxy___ -AR Acid Resisting Epoxy Coated Cast Iron___ -C Clamp Collar for -90 Side Outlet Body___ -CP Chrome-Plated Bronze Top___ -DP Decorative Polished Top___ -EF 3/8 [16] Extension Frame___ -G Galvanized Cast Iron___ -HD Heavy-Duty Slotted Grate (ZN 5 [127] & 6 [152] Sizes Only)___ -OF Oval Funnel (Z329-7) (6-10 [152-254] Strainers Only)___ -P Trap Primer Connection (Specify 1/2 [13] or 3/4 [19])___ -PC Protective Cover___ -SA Stabilizer Assembly (See Z1035)___ -SQ Stabilizer Q-Deck (See Z1035-Q)

___ -SR Stabilizer Ring___ -TC Neo-Loc Test Cap Gasket (2-4 [51-102] NL Outlet Only)___ -U 1-3 [25-76] High Extension Adapter___ -V Backwater Valve___ -VP Vandal-Proof Secured Top___ -W Winter Closure Plug___ -Y Sediment Bucket___ -4 4 [102] Diameter Funnel (Z328)___ -18 Leveling Ring (See Z400-18)___ -90 90° Threaded Side Outlet Body Assembly

(2 [51], 3 [76] Only)

Dimensions In Inches Approx.Wt. Lbs.

[kg]

StrainerOpen AreaSq. In. [cm2]

APipe Size

B StrainerDia.

K K'Min. Max. Min. Max.

2-3 [51-76] 5 [127] 1 [25] 1-1/2 [38] 1-3/32 [28] 2-1/4 [57] 11 [5] 6-1/4 [40]2-3-4 [51-76-102] 6 [152] 1 [25] 1-25/32 [45] 1-13/32 [36] 2-17/32 [64] 13 [6] 9 [58]2-3-4 [51-76-102] 7 [178] 1 [25] 2-1/8 [54] 1-23/32 [44] 2-7/8 [73] 14 [6] 12 [77]

3-4 [76-102] 8 [203] 1-5/32 [30] 2-1/8 [54] 1-3/4 [44] 2-7/8 [73] 16 [7] 19 [123]6 [152] 8 [203] 1-5/32 [30] 2-1/8 [54] 1-3/4 [44] 2-7/8 [73] 18 [8] 19 [123]6 [152] 10 [254] 1-7/16 [37] 2-1/2 [64] 2 [51] 3-1/4 [83] 22 [10] 23 [148]

Z415BBODY ASSEMBY W/ "TYPE B" STRAINER

Rev. SDate: 3/13/14C.N. No. 130696Prod. | Dwg. No. Z415B

FD-1

RD-1 ROOF DRAIN


Dimensional Data (inches and [mm]) are Subject to Manufacturing Tolerances and Change Without Notice

ZURN INDUSTRIES, LLC ♦♦♦♦♦ SPECIFICATION DRAINAGE OPERATION ♦♦♦♦♦ 1801 Pittsburgh Ave. ♦♦♦♦♦ Erie, PA 16514Phone: 814/455-0921 ♦♦♦♦♦ Fax: 814/454-7929 ♦♦♦♦♦ World Wide Web: www.zurn.com


®

SPECIFICATION SHEET

TAG _______

SUFFIXES____ -AC Angular Underdeck Clamp____ -AR Acid Resistant Epoxy Coated____ -AW 3/4 [19] to 4 [102] Adj. Water Level Regulator

(Specify Height) (ZC Only)____ -BS Bronze Mesh Screen Over Dome____ -C Underdeck Clamp____ -DE Deck Extension____ -DP Top-Set® Deck Plate (Replaces both the -C and -R)____ -DR Top-Set® Drain Riser____ -DX Dex-o-tex Flange____ -E Static Extension 1 [25] thru 4 [102] (Specify Ht.)____ -EA Adjustable Extension Assembly

2 1/8 [54] thru 3 1/2 [89]____ -EB Top-Set® Adjustable Extension Assembly____ -FG Flush Grate (Replaces Dome Strainer)____ -G Galvanized Cast Iron____ -GD Galvanized Cast Iron Dome (ZC Only)____ -HD 6 3/4 [171] High Aluminum Dome Strainer

(148 Sq. In. [955 cm2] Open Area) (ZA Only)DWG. NO. 59285

REV. M

PRODUCT NO. Z100

DATE: 2/28/08 C.N. NO. 98161

Z10015 [381] DIAMETER MAIN ROOF DRAIN

LOW SILHOUETTE DOME

PREFIXES_____ Z D.C.C.I. Body with Poly-Dome*_____ ZA D.C.C.I. Body with Aluminum Dome_____ ZC D.C.C.I. Body with Cast Iron Dome_____ ZRB D.C.C.I. Body with Plain Bronze Dome

ENGINEERING SPECIFICATION: ZURN Z10015 [381] Diameter roof drain. Dura-Coated cast iron body withcombination membrane flashing clamp/gravel guard and lowsilhouette Poly-Dome.


PIPE SIZE (Specify size/type) OUTLET E BODY HT. DIM.2 thru 6,8 [51 thru 152,203] _____ IC Inside Caulk 5 1/4 [133]2 thru 6,8 [51 thru 152,203] _____ IP Threaded 3 3/4 [95]2 thru 6,8 [51 thru 152,203] _____ NH No-Hub 5 1/4 [133]2,3,4 [51,76,102] _____ NL Neo-Loc 4 9/16 [116]6 [152] _____ NL Neo-Loc 5 7/16 [112]

____ -R Roof Sump Receiver____ -SC Secondary Clamp Collar____ -SS Stainless Steel Mesh Screen Over Dome____ -ST Dome with Solid Top (ZA, ZC & ZRB Only)____ -TC Neo-Loc Test Cap Gasket

(2 - 4 [51 - 102] NL Bottom Outlet Only)____ -VP Vandal-Proof Secured Top____ -W2 2 [51] Internal Water Dam____ -W3 3 [76] Internal Water Dam____ -W4 4 [102] Internal Water Dam____ -84 Stainless Steel Perforated Gravel Guard____ -85 Stainless Steel Perforated Extension____ -89 2 [51] High External Water Dam____ -90 90° Threaded Side Outlet Body

(2 thru 6 [51 or 152])

5,6 [127,152]26 [12]27 [12]

2,3,4 [51,76,102]

Approx.Wt. Lbs.

[kg]

Dome Open AreaSq. In. [cm2]

APipe Size In.

103 [665]8 [203] 28 [13]

OD-1 OVERFLOW DRAIN

RD-2 ROOF DRAIN

CB-1 CATCH BASIN

Ryan

Stamp

WC-1 WATER CLOSET

M107© 2014 AS America Inc.

To Be Specified:❏ Color: ❏ White ❏ Bone ❏ Seat: ❏ American Standard #5901.100 Heavy duty

open front less cover ❏ American Standard #5905.100 Extra heavy

duty open front less cover❏ Flushometer Valve:

❏ 1.6 gpf: ❏ Sensor-Operated: American Standard Selectronic®

DC Power #6065.161.002 (Top Spud) ❏ Sensor-Operated: American Standard Selectronic®

AC Power #6067.261.002 (Back Spud) ❏ Manual: American Standard #6047.161.002

(Top Spud)❏ 1.28 gpf: ❏ Sensor-Operated: American Standard Selectronic®

DC Power #6065.121.002 (Top Spud) ❏ Sensor-Operated: American Standard Selectronic®

AC Power #6067.221.002 (Back Spud) ❏ Manual: American Standard #6047.121.002

(Top Spud)❏ 1.6 / 1.1 gpf Dual Flush: ❏ Sensor-Operated: American Standard Selectronic®

DC Power #6065.761.002 (Top Spud)

MADERA™ FloWise® 16-1/2" HEIGHTELONGATED FLUSHOMETER TOILET

VITREOUS CHINA LESS EVERCLEAN®

MADERA™ FloWise® 16-1/2" HEIGHT ELONGATED LESS EVERCLEAN®

• Floormountflushometervalvetoilet• Vitreouschina• HighEfficiency,LowConsumption.Operatesin

the range of 1.1 gpf to 1.6 gpf (4.2 Lpf to 6.0 Lpf)• MeetsdefinitionofHET(HighEfficiencyToilet)whenusedwithahighefficiencyflushvalve(1.28gpfor1.6/1.1gpfdualflush)

• Fullyglazed2-1/8"trapway• Elongatedbowl• 10"or12"roughing-in• 16-1/2"rimheightforaccessibleapplication• Condensationchannel• Powerfuldirect-fedsiphonjetaction• 10"x12"watersurfacearea• 1-1/2"inletspud• 2boltcaps• 100%factoryflushtested

❏ 3043.001Elongatedbowlonly,topspud❏ 3248.001Elongatedbowlonly,topspudwith slotted rim for bedpan holding (White only)❏ 3249.001Elongatedbowlonly,backspud

System MaP* Score: • 1,[email protected],1.28gpfor1.6gpfwhenusedwithanAmericanStandardflushvalve* Maximum Performance (MaP) testing performed by IAPMOR&TLab.MaPReportconductedbyVeritecConsulting,Inc.and Koeller and Company.

Component Parts:❏ 047007-0070A Inlet Spud (furnished with bowl)❏ 481310-100 Bolt caps with retainers

(furnished with bowl)

Nominal Dimensions:718 x 356 x 419mm(28-1/4"x14"x16-1/2")

Fixtureonly,lessseatandflushvalve

Recommended working pressure–between25psiatvalvewhenflushingand80psistatic

Compliance Certifications -Meets or Exceeds the Following Specifications:• ASMEA112.19.2-2008/CSAB45.1-08forVitreousChina Fixtures

SEE REVERSE FOR ROUGHING-IN DIMENSIONS

Rev. 2/14

BARRIER FREE

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES - CHECK LOCAL CODES. When installed so top of seat is 432 to 483mm (17" to 19") from thefinished floor.

Ryan

Stamp


NOTES:PRODUCT3043SHOWN,3248SAMEEXCEPTWITHSLOTTEDRIMFORBED PAN HOLDING.TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKERONTHEFLUSHOMETERVALVE,THEPLUMBERMUSTVERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.THIS TOILET DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF254MM(10")ANDAMAXIMUMDIMENSIONOF305MM(12")FROMFINISHED WALL TO C/L OF OUTLET.FLUSHOMETERVALVENOTINCLUDEDWITHFIXTUREANDMUSTBEORDERED SEPARATELY. FLUSHOMETER VALVE REQUIREMENTS FOR 12"(305MM)ROUGH-IN:SWEATEXTENSIONNIPPLEISREQUIRED.REFER TO VALVE MANUFACTURER AND LOCAL CODES.

IMPORTANT:Dimensionsoffixturesarenominalandmayvarywithinthe range of tolerances established by ANSI Standard A112.19.2. These measurementsaresubjecttochangeorcancellation.Noresponsibilityisassumed for use of superseded or voided pages.

238mm(9-3/8")

419mm(16-1/2")

438mm(17-1/4")

470mm(18-1/2")

356mm(14")

338mm(13-5/16")

150mm(5-7/8")

254mm(10")

13mm(1/2")

76mm(3")

718mm(28-1/4")

C/L OF SEAT POST HOLES140mm (5-1/2") CENTERS

FINISHED WALL

FINISHED FLOOR

C/L OF OUTLET

711mm(28")

1-1/2 "SPUD

121mm(4-3/4")

238mm(9-3/8")

419mm(16-1/2")

470mm(18-1/2")

356mm(14")

338mm(13-5/16")

150mm(5-7/8")

254mm(10")

13mm(1/2")

25mm(1")

102mm(4")

718mm(28-1/4")

C/L OF SEAT POST HOLES140mm (5-1/2") CENTERS

FINISHED WALL

FINISHEDFLOOR

C/L OF OUTLET

1" N.P.T. OR 1" C.W.T. SUPPLYTO FLUSH VALVE

3043.001/3248.001

3249.001

MADERA™ FloWise® 16-1/2" HEIGHTELONGATED FLUSHOMETER TOILET

VITREOUS CHINA LESS EVERCLEAN®

Rev. 2/14

BARRIER FREE

Ryan

Highlight

��

�� !"� #$%��$��$�%�&�� '("� �#�$��$��)#��*+,��-,!��!."�/// 01* 2�3

� ��' ','"�� ))��'4�1'��*-5!��-44-44'16'�� 7'*-��)�#�� !"� ��$)��$%��'("� ��$)��$#��

��

�� ! !��"�#��!�� !!�� " ��"�#��!�� !!�� $!��%#�� !�� &��

��

#$%��&�' ��'��(��'�)�*��$!�� ## ��+'��(��'� �� (��(�#$��'��(��

��"��'��, ��,��-��+.�/.0��,*#'�1�'�� 2��1�'�3�000%�

)*�+*)),+*�� -)�+#+��.+�*/� � 01,*� 02333�4�5��4��6��7�48�)��(��$��#$��4�$9��45!��67��!��#$8�9!�6�2��$��!��$��*��!��5��'� ��$!��*��3��:��%7��#��;�462��$��6��!��#$�*��2��#��6��!��<98!��'�;��%,%�2�$!��*��8��!��=��6��#��<�2=�!��2��$<��=��6��!��2��5�2��!��#��6��>��<��!��2�6��!��2��!��#��#��!��!��2��2��'��!��!��8#��!��2��6��!�2�!6��*��=��6��2��*��#��*��2��*'�?��$��2��$��$��'

� ��

��

�

Proudly Made in the USA

Bemis Manufacturing Co., Sheboygan Falls, WI 53085 Phone: 800-558-7651 Fax: 800-292-3647www.ToiletSeats.com

M O D E L # C O L O R #

1655CT/1655SSCT _______D E S C R I P T I O N :

Open front less cover, elongated, extra heavy-duty, injection molded solid plastic toilet seat. Features four molded-in bumpers, non self-sustaining (1655CT) or self-sustaining (1655SSCT) check hinges with non-corrosive 300 Series stainless steel posts and pintles and STA-TITE® Commercial Fastening System™. This seat complies with IAPMO/ANSI Z124.5-2013 Plastic Toilet Seats as a class Commercial Heavy Duty.

S P E C I F I C A T I O N S :

Size: Elongated

Material: Plastic

Style: Open Front less Cover

Bumpers: Four

Hinges: Plastic Non Self-Sustaining (1655CT) or Self-Sustaining (1655SSCT) with 300 Series Stainless Steel Posts and Pintles

Fastening System: STA-TITE® Commercial Fastening System™

F E A T U R E S :

STA-TITE® Commercial Fastening System™

Non-Corrosive 300 Series Stainless Steel Posts and Pintles

D I M E N S I O N S :

C O M M E R C I A L E X T R A H E A V Y - D U T YP L A S T I C T O I L E T S E A T

PLASTIC HINGES WITH STAINLESS STEEL POSTS

AND PINTLES

STA-TITE® COMMERCIAL FASTENING SYSTEM™

7-5/8"18-3/4" 18-3/8"

14-5/16"

5-1/2"

3-3/16" 1"1-1/4"

2-5/8"

©2014 0B7012285 REV C

L-1 LAVATORY

M31© 2014 AS America Inc. Revised 3/14

To Be Specified:❏ Color: ❏ White ❏ Faucet*:❏ Faucet Finish:❏ Supplies:❏ 1-1/4" Trap:❏ Nipple:❏ Bracket Support (by others):❏ Concealed Arms Support (by others):

* See faucet section for additional models available

LUCERNE™

WALL-HUNG LAVATORYVITREOUS CHINA

LUCERNE™ WALL-HUNG LAVATORY

• Wall-hungsink• Vitreouschina• Frontoverflow• D-shapedbowl• Self-drainingdeckareawithcontoured

back and side splash shields• Faucetledge• CompliantwithTexasaccessibilitystandard(TAS)forchildrenagegroup13andup

Faucet holes on 203mm (8") centers (Illus.):❏ 0356.028 Forexposedbracketsupport

Shownwith4801.862AmarilisHeritage faucetwithTriuneCrosshandles(notincluded)❏ 0356.015Forwallhanger(included)or

concealed arms support❏ 0356.915Forwallhanger(included)or

concealed arms support• Lessoverflow

Faucet holes on 102mm (4") centers:❏ 0355.027Forexposedbracketsupport❏ 0355.012Forwallhanger(included)or concealed arms support❏ 0355.912Forwallhanger(included)or


Single center faucet hole (Illus.):❏ 0356.041Forexposedbracketsupport

Shownwith1340.000meteringfaucet (not included)❏ 0356.421Forwallhanger(included)or

concealed arms support❏ 0356.921Forwallhanger(included)or


❏ 0356.439Forwallhanger(included)orconcealed arms support

• Singlefaucetholeonright❏ 0356.066Forexposedbracketsupport

• Singlefaucetholeonright

Nominal Dimensions: 521x464mm(20-1/2"x18-1/4")

Bowl sizes:381mm(15")wide254mm(10")fronttoback165mm(6-1/2")deepCompliance Certifications -Meets or Exceeds the Following Specifications:• ASMEA112.19.2/CSAB45.1forVitreousChinaFixtures

SEEFOLLOWINGPAGESFORROUGHING-INDIMENSIONS

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE-LINES AND ANSI A117.1 ACCESSIBLE AND USABLEBUILDINGS AND FACILITIES - CHECK LOCAL CODES.Top of front rim mounted 864mm (34") from finished floor.

0356.028

0356.041

BARRIER FREE

Ryan

Stamp

Ryan

Stamp

Ryan

Highlight


LUCERNE™

WALL-HUNG LAVATORYVITREOUS CHINA

BARRIER FREE

0356.028 8"CTRSFOREXPOSEDBRACKETSUPPORT 0356.015 8"CTRSFORWALLHANGER ORCONCEALEDARMS0356.915 LESSOVERFLOW

102mm(4")

152mm(6")

152mm(6")

102mm(4")

86mm(3-3/8")

203mm(8")

8mm(5/16")

464mm(18-1/4")

521mm(20-1/2")

13mm(1/2")

FINISHEDWALL

FINISHEDWALL

(6) 25mm (1") DIA.

ACCESS HOLES

FOR CONC.

ARMS

102mm(4") 25mm

(1")

79mm(3-1/8")

267mm(10-1/2")

425mm(16-3/4")

114mm(4-1/2")

44mm (1-3/4")

38mm(1-1/2") 10mm

(3/8")DIA. ANCHOR

SCREW HOLES203mm

(8")

SUPPLIESAS REQUIRED

1-1/4" O.D. WASTEOUTLET FORDRAIN PLUG

1-1/4" O.D. WASTEOUTLET FORPOP-UP DRAIN

27mm x 14mm(1-1/16 x 5/16")

SLOTS

S-9 HANGER

206m

m(8

-1/8

")

*260m

m(1

0-1/

4")

298m

m(1

1-3/

8")

*35

2mm

(13-

7/8"

)*

787m

m (

31)

864m

m (

34)

FINISHEDFLOOR

54mm (2-1/8") DIA.HOLES FORCONCEALED ARMS

34"(864mm)

27" MIN.(686mm)

18-1/4"(464mm)

8" MIN.(203mm)

FINISHEDWALL

6" MAX.(152mm)

9" MIN.(229mm)BARRIER FREE

CLEARANCE

11"(279mm)

102mm(4")

152mm(6")

152 mm(6")

86mm(3-3/8")

203mm(8")

8mm(5/16")

464mm(18-1/4")

521mm(20-1/2")

13mm(1/2")

FINISHEDWALL

(6) 25mm (1") DIA. ACCESS

HOLES FOR CONC. ARMS

102mm(4")

25mm(1")

79mm(3-1/8")

267mm(10-1/2")

425mm(16-3/4")

114mm(4-1/2")

44mm(1-3/4")

38mm(1-1/2")

10mm (3/8")DIA. ANCHOR

SCREW HOLES203mm

(8")

SUPPLIESAS REQUIRED

1-1/4" O.D. WASTEOUTLET FORDRAIN PLUG

1-1/4" O.D. WASTEOUTLET FORPOP-UP DRAIN

27mm X 14mm(1-1/16" x 5/16") SLOTS

S-9 HANGER

206mm(8-1/8")

*286mm(11-1/4")

298mm(11-3/8")*

352mm(13-7/8")*

787mm (31") 864mm (34")

FINISHEDFLOOR

54mm (2-1/8") DIA.HOLES FORCONCEALED ARMS

203mm(8")

34"(864mm)

27" MIN.(686mm)

18-1/4"(464mm)

8" MIN.(203mm)

FINISHEDWALL

6" MAX.(152mm)

9" MIN.(229mm)BARRIER FREE

CLEARANCE

11"(279mm)

0355.021 4"CTRSFOREXPOSEDBRACKETSUPPORT0355.012 4" CTRSFORWALLHANGEROR CONCEALEDARMS0355.912 LESSOVERFLOW

NOTES:*DIMENSIONSSHOWNFORLOCATIONOFSUPPLIESAND“P”TRAPARESUGGESTED.PROVIDESUITABLEREINFORCEMENTFORALLWALLSUPPORTS.FITTINGSNOTINCLUDEDANDMUSTBEORDEREDSEPARATELY.CONCEALEDARMSUPPORTASREQUIREDTOBEFURNISHEDBYOTHERS.

IMPORTANT:DimensionsoffixturesarenominalandmayvarywithintherangeoftolerancesestablishedbyANSIStandardA112.19.2.Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibilityisassumedforuseofsupersededorvoidedpages.

LAVATORY DESIGNED TO MEET ADA HANDICAPPED GUIDELINES WITH MOUNTING HEIGHT SET AT 864MM (34") ABOVE FINISHED FLOOR.

Revised 3/14

Ryan

Highlight

Job Name ________________________________________________

Item Number _____________________________________________

Section/Tag ______________________________________________

Model Specified ___________________________________________

Architect _________________________________________________

Engineer _________________________________________________

Contractor ________________________________________________


Date _____________________________________________________

MECHANICAL FAUCETS

420-E2805ABCPManual Faucets

Product Type___________________________________________________Deck Mounted 4" Fixed Centers Single Lever Hot and Cold WaterMixing Sink Faucet

Features & Specifications___________________________________________________• 4" Fixed Centers• 0.5 GPM (1.9 L/min) Vandal Proof Non-Aerating Spray • Volume Control and Hot Water Limit Stop Cartridge• 1/2" NPSM Supply Inlets for 3/8" or 1/2" Flexible Riser• 4 5/8" Center to Center Rigid Cast Brass Spout• ECAST® design provides durable construction with total lead contentequal to or less than 0.25% by weighted average• CFNow! Item Ships in 3 Days


Warranty___________________________________________________• 5-Year Limited Faucet Warranty• 5-Year Limited Cartridge Warranty• 1-Year Limited Finish Warranty

Codes & Standards___________________________________________________• ASME A112.18.1/CSA B125.1• Certified to NSF/ANSI 61, Section 9 by CSA• California Health and Safety Code 116875 (AB1953-2006)• Vermont Bill S.152• NSF/ANSI 372 Low Lead Content• ADA ANSI/ICC A117.1• CALGreen

ECAST products are intended for installation where state laws and localcodes mandate lead content levels or in any location where lead contentis a concern.



P: 847/803-5000F: 847/803-5454



Architect/Engineer Specification________________________________________________________________________________________________________Chicago Faucets No. 420-E2805ABCP, Sink Faucet for hot and cold water, single lever, deck-mounted with 4" fixed centers, chrome plated. Rigid,cast brass spout, 4-5/8" center-to-center. 0.5 GPM (1.9 L/min) vandal-proof, pressure compensating, Econo-Flo, non-aerating spray. 1/2" NPSMsupply inlets for 3/8" or 1/2" flexible riser. ECAST® construction with less than 0.25% lead content by weighted average. CALGreen compliant. Thisproduct meets ADA ANSI/ICC A117.1 requirements and is tested and certified to industry standards: ASME A112.18.1/CSA B125.1, Certified toNSF/ANSI 61, Section 9 by CSA, California Health and Safety Code 116875 (AB1953-2006), Vermont Bill S.152, NSF/ANSI 372 Low Lead Content,and California Green Building Standards Code (CALGreen). This product meets ADA ANSI/ICC A117.1 requirements and is tested and certified toindustry standards: ASME A112.18.1/CSA B125.1, Certified to NSF/ANSI 61, Section 9 by CSA, California Health and Safety Code 116875(AB1953-2006), Vermont Bill S.152, NSF/ANSI 372 Low Lead Content, and California Green Building Standards Code (CALGreen).





P: 847/803-5000F: 847/803-5454



Distributed Exclusively by Ferguson and Wolseley Canada© 2011 Ferguson Enterprises, Inc. All Rights Reserved 7781 03/11

Product Features

PFGD101

Offset Lavatory Grid Drain

Warranty and Codes

Product Specifications

PFGD101

2.24”

L-1 LAVATORY

Page: 16 / 100

®

Adjustable Tubular P-Traps

Distributed Exclusively by Ferguson and Wolseley Canada© 2010 Fergusun Enterprises, Inc. All Rights Reserved 6362 10/10

Warranty and CodesThis PROFLO product carries a 1-year limited warranty.

PFPTB100

Model

NumberDescription

Cleanout

Y/N

DimensionsGauge

F

A B C D EFinish Flange Nuts

in mm in mm in mm in mm in mm

PFPTB100 1-1/4 x 1-1/4 No 11 279.4 5 127.0 1-1/4 31.75 3 76.2 8 203 17 Chrome Box Brass

PFPTB101 1-1/4 x 1-1/4 Yes 11 279.4 5 1/4 133.3 1-1/4 31.75 3 76.2 8 203 17 Chrome Box Brass

PFPTB103 1-1/4 x 1-1/2 No 12 1/4 311.1 5 1/8 130.1 1 1/2 38.1 3 1/4 82.5 9 228.6 17 Chrome Box Brass

PFPTB104 1-1/4 x 1-1/2 Yes 12 1/4 311.1 5 1/4 133.3 1 1/2 38.1 3 1/4 82.5 9 228.6 17 Chrome Box Brass



PFPTB112 1-1/2 x 1-1/2 No 12 1/4 311.1 5 1/8 130.1 1 1/2 38.1 3 1/4 82.5 9 228.6 17 Chrome Shallow Brass

PFPTB102 1-1/4 x 1-1/4 semi-cast Yes 10 1/8 257.1 4 5/8 117.4 1-1/4 31.75 2 5/8 66.6 7 1/2 190.5 17 Chrome Shallow Zinc

PFPTB106 1-1/4 x 1-1/2 semi-cast Yes 10 3/8 263.5 5 127 1 1/2 38.1 2 7/8 73.0 7 1/2 190.5 17 Chrome Shallow Zinc


PFPTB110 1-1/2 x 1-1/2 w/ground joint No 12 1/4 311.1 5 1/8 130.1 1 1/2 38.1 3 1/4 82.5 9 228.6 17 Chrome Box Brass

PFPTB111 1-1/4 x 1-1/2 w/ground joint No 12 1/4 311.1 5 1/8 130.1 1 1/2 38.1 3 1/4 82.5 9 228.6 17 Unfinished Box Brass

PFPTB105 1-1/4 x 1-1/2 w/ground joint No 10 3/4 273.0 5 1/8 130.1 1 1/2 38.1 3 1/4 82.5 7 1/2 190.5 17 Chrome Shallow Brass

PFPTB400 1-1/4 x 1-1/4 w/cast body Yes 11 1/8 282.5 4 5/8 117.4 1-1/4 31.75 2 5/8 66.6 8 1/2 215.9 17 Chrome Box Brass

PFPTB401 1-1/2 x 1-1/4 w/cast body Yes 11 7/8 301.6 5 127 1 1/2 38.1 2 7/8 73.0 9 228.6 17 Chrome Box Brass

PFPTB402 1-1/2 x 1-1/4 w/cast body No 11 7/8 301.6 4 7/8 123.8 1 1/2 38.1 2 7/8 73.0 9 228.6 17 Chrome Box Brass



PFPTB200 1-1/4 x 1-1/4 No 11 279.4 5 127.0 1-1/4 31.75 3 76.2 8 203 20 Chrome Box Zinc

PFPTB201 1-1/2 x 1-1/2 No 12 1/4 311.1 5 1/8 130.1 1 1/2 38.1 3 1/4 82.5 9 228.6 20 Chrome Box Zinc

PFPTB202 1-1/2 x 1-1/2 No 12 1/4 311.1 5 1/8 130.1 1 1/2 38.1 3 1/4 82.5 9 228.6 20 Unfinished Shallow Brass

PFPTB300 1-1/4 x 1-1/4 No 10 254.0 5 127.0 1-1/4 31.75 3 76.2 7 177.8 22 Chrome Box Zinc


For

Submittal

L-1 LAVATORY

Page: 17 / 100

Product Features

• Operatingtemperature:40-160°F• Operatingpressure:20-125PSI• Burstpressure:2000PSIat70°F• Nuts:heavydutynickelplatedbrass

orplastic(acetal)• Hosebarbs:lowleadbrass (longlength)

• Outerwirebraid: 304stainless\steelwire• Innerhose:HeavydutyreinforcedPVC

(600PSIburstpressureat70°F)• Washers:Santoprenerubber• Ferrules:lowleadbrass• Avarietyoflengthsfrom9”to84”• MadeinChina

PFX146205

Steel & PVC Braided Reinforced Flexible Connectors


Warranty and Codes

ThisPROFLOproductcarriesa1-yearlimitedwarranty.ASMEA112.18.6-2009.IAPMOlisted.


PF146/PFX146

Installation Instructions

• Forusewithwaterinaccessiblelocationsonly• Handtightenplus1/4turn.Plasticnutsarehandtightenonly. Donotovertightennuts.

• Checkforleaksbeforeleavingjobsite.• Inspectregularlyforgeneralfitnessandreplaceifdamaged, corroded,orworn.• Donotexposetocorrosivechemicals.

Product # Description cUPC UPC Low Lead Compliant Product # Description cUPC UPC Low Lead Compliant

PFX146202 PFX146430

PFX146205 PFX146432

PFX146207

PFX146222

PFX146462

PFX146224

PFX146463

PFX146232

PFX146471

PFX146302

PFX146472

PFX146303

PFX146473

PFX146304

PFX146474

PFX146306

PFX146322

PFX146492

PFX146323

PF146814

PFX146324

PF146815

PFX146326

PF146816

PFX146330

PFX146332

PFX146334

PFX146342

PFX146343

PFX146344 Product # Description cUPC UPC Low Lead Compliant

PFX146350 PFX146002

PFX146352 PFX146022

PFX146354 PFX146023

PFX146365 PFX146024

PFX146423 PFX146172

PFX146424 PFX146198

* With brass elbow

PVC CONNECTORS Product Certification

STAINLESS STEEL CONNECTORS Product Certification STAINLESS STEEL CONNECTORS Product Certification

3/8” C X 1/2” F X 20” Ice Maker

3/8” C X BC X 12” Closet

1/4” X 1/4” C X 60” Ice Maker

3/8” C X 3/8” OD CPLG X 20” Sink

1/2” F X BC X 12” Closet







1/4” X 1/4” C X 24” Ice Maker

1/2” C X 1/2” F X 20” Sink

1/2" X 1/2" C X 84" Dish Washer*

3/8” X 3/8” C X 72” Dish Washer*



3/8” X 3/8” C X 20” Sink

3/8” C X 1/2” F X 20” Sink

3/8” C X 1/2” F X 30” Sink

3/8” C X 1/2” F X 48” Sink

3/8” C X 1/2” F X 60” Sink

3/8” C X 1/2” F X 72” Sink

1/2” X 1/2” F X 30” Sink

1/2” X 1/2” F X 20” Sink

3/4” M X 3/4” F X 18” Water Heater

3/4” X 3/4” F X 24” Water Heater


1/4” X 1/4” C X 84” Ice Maker

1/4” X 1/4” C X 60” Ice Maker


48” Washing Machine Hose



1/2” C X 1/2” F X 16” Sink

1/2” X 1/2” F X 12” Sink

1/2” X 1/2” F X 16” Sink

3/8” C X 1/2” F X 12” Sink

3/8” C X 1/2” F X 16” Sink

3/8” X 3/8” C X 12” Sink

3/8” X 3/8” C X 16” Sink

3/8” C X 1/2” F X 16” Sink

3/8” C X 1/2” F X 12” Sink

1/2" X 1/2" F X 12" Sink

L-1 LAVATORY

Page: 20 / 100

PFE1

Escutcheons Standard Type

© 2007 Wolseley 0371 10/07

Warranty and CodesThe PROFLO product carries a 1-year limited warranty.

Model NumbersIron pipe sizes (chrome plated)

PFE1 3/8”PFE2 1/2”PFE8 3/4”PFE9A 1”PFE10 1-1/4”PFE11 1-1/2”PFE16A 2”

Iron pipe sizes (polished brass)PFE2PB 1/2”PFE11PB 1-1/2”

Copper tube sizes (chrome plated)PFE7 5/8” OD PFE9 7/8” OD

Copper tube sizes (polished brass)PFE7PB 5/8” OD

Product Features• Fits iron pipe and copper tube• Chrome plated steel and polished brass

L-1 LAVATORY

Page: 21 / 100

© 2013 Wolseley CAP June/13/2013

Warranty and CodesThis PROFLO product carries a 1-year limited warranty. ASME A112.18.1-2005/CSA B125.1-05

Distributed exclusively by Wolseley’s North American Division, Ferguson, Stock Building Supply and Wolseley Canada.

Low LeadCommercial and Heavy Duty Stops

LOWLEAD

COMPLIANT

PFXCAC32C

Product Features• Low lead brass body

• NSF 372 & cUPC approved

• Operating pressure 125psi maximum• Operating temperature 40°F-160°F• Low lead brass stem

Individual Stops PFXCAC32C* LF CP 5/8 comp X 3/8 comp angle stopPFXCAS32C* LF CP 1/2 SWT X 3/8 comp sply stopPFXCAZ32C LF CP1/2 SWT W/ EXT X 3/8 comp stop PFXCAT22C LF CP 3/8 IPS X 3/8 comp sply stopPFXCAT32C LF CP 1/2 IPS X 3/8 comp sply stopPFXCAT33C LF CP 1/2 IPS X 1/2 comp sply stop

Loose Key

PFXCAT22CLK LF CP 3/8 IPS X 3/8 comp stop loose keyPFXCAT32CLK LF CP 1/2 IPS X 3/8 comp stop loose keyPFXCAC32CLK* LF CP 5/8 comp X 3/8 comp stop loose keyPFXCAS32CLK* LF CP 1/2 SWT X 3/8 comp stop loose keyPFXCAZ32CLK LF CP 1/2 SWT W/ EXT X 3/8 comp stop loose key

PFXHAC32C* LF CP 5/8 comp X 3/8 comp stopPFXHAC32CLK* LF CP 5/8 comp X 3/8 comp stop loose keyPFXHAT32CLK LF CP 1/2 IPS X 3/8 comp stop loose keyPFXHATT33LK LF CP 1/2 IPS X 1/2 IPS comp stop loose key

Heavy Duty

PFXCAZ32CLK

PFXHAT32CLK

Model Numbers (*For use copper tube only)

Ryan

Stamp



SPECIFICATION SHEET

TAG______

ZURN INDUSTRIES, LLC. ♦♦♦♦♦ SPECIFICATION DRAINAGE OPERATION ♦♦♦♦♦ 1801 Pittsburgh Ave. ♦♦♦♦♦ Erie, PA 16514Phone: 814/455-0921 ♦♦♦♦♦ Fax: 814/454-7929 ♦♦♦♦♦ World Wide Web: www.zurn.com


®

Z1231CONCEALED ARM SYSTEM

WALL LAVATORIES

DWG. NO. 58855

REV. I

PRODUCT NO. Z1231

DATE: 11/29/10 C.N. NO. 120530


PREFIXES____ Z Dura-Coated System with Concealed Arms*

SUFFIXES____ -AL Adapter Lug____ -CB Carrier Bank____ -CU Floor to Ceiling Upright (Specify Height Required)____ -D Back to Back System____ -E2 Concealed Arm Escutcheons 2 [51] Long____ -E4 Concealed Arm Escutcheons 4 [102] Long____ -E6 Concealed Arm Escutcheons 6 [152] Long____ -SL Sleeve Length Over 4 [102] (Specify Length)____ -WS Wall Support Valve Plate (Specify Valve Name and Number)____ -79 Paraplegic Rough-in

ProductNo.

Approx.Wt. Lbs.

[kg]

Z1231 45 [20]

ENGINEERING SPECIFICATION: ZURN Z1231 Lavatory support system with concealed arms.Complete with Dura-Coated rectangular steel uprights with welded feet, cast iron adjustable headers,concealed arms, steel sleeves, alignment truss, and mounting fasteners.

Note: Dimensional data for letter dimensionsdepends upon fixture type and manufacturer. SeeZurn Carrier/Fixture Rough-In information atwww.zurn.com for specific rough-in dimensions

L-1 LAVATORY

Page: 23 / 100

S-1 SINK

SPECIFICATIONS

Gourmet (Lustertone®) Stainless SteelSingle Bowl Top Mount Sink

Model(s) LRAD191865

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to theuser. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 11092015 2222 Camden Court © 2015elkay.com/lrad191865 Oak Brook, IL 60523 LRAD191865_spec.pdf

PRODUCT SPECIFICATIONS Gourmet (Lustertone®) Stainless Steel Single Bowl Top Mount Sink.Overall dimensions are 19" x 18" x 6-1/2". Sink is manufactured from18 gauge 304 Stainless Steel with a Lustrous Highlighted Satinfinish, Rear Center drain placement and Full spray sides andbottom.

Installation Type: Top MountMaterial: 304 Stainless SteelFinish: Lustrous Highlighted SatinGauge: 18Sound Deadening: Full spray sides and bottomNumber of Bowls: 1Sink Dimensions: 19" x 18" x 6-1/2"Bowl 1 Dimensions: 16" x 11-1/2" x 6-3/8"Drain Size: 3-1/2" (89mm)Drain Location: Rear CenterMinimum Cabinet Size: 24"Mounting Hardware: Part # 64090012 included for

countertops up to 3/4" (19mm) thickCutout Template #: 1000001260Template is available for download at elkay.com

Cutout Dimensions for Top Mount Installation: 18-3/8" x 17-3/8" (467mm x 441mm) with 1-1/2" (38mm) cornerradius

This sink is compliant to ADA and ANSI/ICC A117.1 accessibilityrequirements when installed according to the requirements outlinedin these standards.

AMERICAN PRIDE. A LIFETIME TRADITION.Like your family, the Elkay family has values and traditions that endure. For almost a century, Elkay has been a family-owned and operated company, providing thousands of jobs that support our families and communities.

Sinks are listed by IAPMO® as meeting the applicablerequirements of the Uniform Plumbing Code®, InternationalPlumbing Code®, and National Plumbing Code of Canada.

Product Compliance: ADABUY AMERICAN ACTASME A112.19.3/CSA B45.4

Clean and Care Manual (PDF)Installation Instructions (PDF)Limited Lifetime Warranty (PDF)Similar models are available with: Quick-Clip Mounting System,additional ADA depths, CuVerro antimicrobial copper

Hole Drilling Configurations:

PART:________________________________QTY: _____________

PROJECT:______________________________________________

CONTACT:______________________________________________

DATE:__________________________________________________

NOTES:_________________________________________________

APPROVAL:_____________________________________________

http://www.elkay.com/lrad191865

http://www.elkay.com/wcsstore/lkdocs/templates/1000001260.dxf

http://www.elkay.com/wcsstore/lkdocs/care-cleaning-install-warranty-sheets/residential%20and%20commercial%20care%20%20cleaning.pdf



http://www.elkay.com/wcsstore/lkdocs/care-cleaning-install-warranty-sheets/74180147.pdf

http://www.elkay.com/wcsstore/lkdocs/care-cleaning-install-warranty-sheets/74180147.pdf

http://www.elkay.com/wcsstore/lkdocs/care-cleaning-install-warranty-sheets/residential%20sinks%20warranty.pdf

Ryan

Stamp

SPECIFICATIONS

Gourmet (Lustertone®) Stainless Steel Single Bowl Top Mount Sink

Model(s) LRAD191865

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 11092015 2222 Camden Court © 2015 elkay.com/lrad191865 Oak Brook, IL 60523 LRAD191865_spec.pdf

OPTIONAL ACCESSORIES Drain: LK99, LKAD35 Faucet: LKGT1041, LKGT2041 Hardware: LK364, LK463

Rinsing Basket: LKWRB1116SS Sinkmate: LKSM17, LKSMHOOK,

LKSMSPONGE, LKSMHSL Soap Dispenser: LKGT1054

Installation Profile:

http://www.elkay.com/lrad191865

Job Name ________________________________________________

Item Number _____________________________________________

Section/Tag ______________________________________________

Model Specified ___________________________________________

Architect _________________________________________________

Engineer _________________________________________________

Contractor ________________________________________________


Date _____________________________________________________

MECHANICAL FAUCETS


Product Type___________________________________________________Deck Mounted 8" Fixed Centers Concealed Hot and Cold Water SinkFaucet

Features & Specifications___________________________________________________• 8" Fixed Centers• 5-1/4" Rigid / Swing Gooseneck Spout • 1.5 GPM (5.7 L/min) Aerator • 4" Vandal Proof Wristblade Handle• Quaturn Compression Operating Cartridge• 1/2" NPSM Supply Inlets and Coupling Nut for 3/8" or 1/2" FlexibleRiser• ECAST® design provides durable construction with total lead contentequal to or less than 0.25% by weighted average• CFNow! Item Ships in 3 Days


Warranty___________________________________________________• Lifetime Limited Faucet Warranty• 5-Year Limited Cartridge Warranty• 1-Year Limited Finish Warranty

Codes & Standards___________________________________________________• ASME A112.18.1/CSA B125.1• Certified to NSF/ANSI 61, Section 9 by CSA• California Health and Safety Code 116875 (AB1953-2006)• Vermont Bill S.152• NSF/ANSI 372 Low Lead Content• ADA ANSI/ICC A117.1• CALGreen

ECAST products are intended for installation where state laws and localcodes mandate lead content levels or in any location where lead contentis a concern.



P: 847/803-5000F: 847/803-5454



Architect/Engineer Specification________________________________________________________________________________________________________Chicago Faucets No. 786-E35ABCP, Sink Faucet for hot and cold water, concealed deck-mount with 8" fixed centers, chrome plated. Rigid/swinggooseneck spout, 5-1/4" center-to-center. 1.5 GPM (5.7 L/min) pressure compensating Softflo aerator. 4" metal, vandal-proof, wristblade handles withsixteen-point, tapered broach and secured blue and red index buttons. Quaturn™ rebuildable compression cartridge, opens and closes 90º, closeswith water pressure, features square, tapered stem. 1/2" NPSM supply inlets and coupling nut for 3/8" or 1/2" flexible riser. ECAST® construction withless than 0.25% lead content by weighted average. CALGreen compliant. This product meets ADA ANSI/ICC A117.1 requirements and is tested andcertified to industry standards: ASME A112.18.1/CSA B125.1, Certified to NSF/ANSI 61, Section 9 by CSA, California Health and Safety Code116875 (AB1953-2006), Vermont Bill S.152, NSF/ANSI 372 Low Lead Content, and California Green Building Standards Code (CALGreen). Thisproduct meets ADA ANSI/ICC A117.1 requirements and is tested and certified to industry standards: ASME A112.18.1/CSA B125.1, Certified toNSF/ANSI 61, Section 9 by CSA, California Health and Safety Code 116875 (AB1953-2006), Vermont Bill S.152, NSF/ANSI 372 Low Lead Content, and California Green Building Standards Code (CALGreen).





P: 847/803-5000F: 847/803-5454



PFWTS

Flat Top Strainer Less Tailpiece

Product Features

• Brass Snap-in Strainer Grid • Chrome Plated Brass Body

• 8mm Rubber Locknut Washer• Paper Washer• Galvanized Steel Cup• Die Cast Lock Nut• Brass Slip Nut• Replacement 3mm Rubber Locknut Washer available (PFBSG) PFWTS

2.13”

4.40”

2.74”

2.01”

Distributed Exclusively by Ferguson and Wolseley Canada

© 2014 Ferguson Enterprises, Inc. All Rights Reserved CAP 14/7

Warranty and Codes

This PROFLO product carries a 1-year limited warranty.

S-1 SINK

Page: 42 / 100

PFTPB100

Flanged/Double Flanged Tailpiece

Distributed Exclusivley by Ferguson and Wolseley Canada© 2011 Ferguson Enterprises, Inc. All Rights Reserved CAP 04/11

Warranty and Codes

This PROFLO product carries a 1-year limited warranty.

PFTPB100 / 200 Series

in mmPFTPB100 1-1/2X4 FLANGED TAILPIECE 4 101.6 17 ChromePFTPB101 1-1/2X6 FLANGED TAILPIECE 6 152.4 17 ChromePFTPB102 1-1/2X8 FLANGED TAILPIECE 8 203.2 17 ChromePFTPB103 1-1/2X12 FLANGED TAILPIECE 12 304.8 17 ChromePFTPB104 1-1/2X12 FLANGED TAILPIECE 12 304.8 20 Un nishedPFTPB105 1-1/2X4 FLANGED TAILPIECE 4 101.6 20 Un nishedPFTPB106 1-1/2X6 FLANGED TAILPIECE 6 152.4 20 Un nishedPFTPB107 1-1/2X8 FLANGED TAILPIECE 8 203.2 20 Un nishedPFTPB108 1-1/2X4 FLANGED TAILPIECE 4 101.6 20 ChromePFTPB109 1-1/2X6 FLANGED TAILPIECE 6 152.4 20 ChromePFTPB110 1-1/2X8 FLANGED TAILPIECE 8 203.2 20 ChromePFTPB111 1-1/2X12 FLANGED TAILPIECE 12 304.8 20 ChromePFTPB112 1-1/2X12 FLANGED TAILPIECE 12 304.8 22 ChromePFTPB113 1-1/2X6 FLANGED TAILPIECE 6 152.4 22 ChromePFTPB114 1-1/2X8 FLANGED TAILPIECE 8 203.2 22 ChromePFTPB200 1-1/2X16 DOUBLE FLANGED TAILPIECE 16 406.4 20 ChromePFTPB201 1-1/2X16 DOUBLE FLANGED TAILPIECE 16 406.4 20 Un nishedPFTPB202 1-1/2X16 DOUBLE FLANGED TAILPIECE 16 406.4 22 Chrome

GaugeB

Finish ForSubmi al

Model Descrip onDimensions

A

PFTPB200

PFTPB200 SERIESPFTPB100 SERIES

S-1 SINK

Page: 43 / 100

®

Adjustable Tubular P-Traps

Distributed Exclusively by Ferguson and Wolseley Canada© 2010 Fergusun Enterprises, Inc. All Rights Reserved 6362 10/10

Warranty and CodesThis PROFLO product carries a 1-year limited warranty.

PFPTB100

Model

NumberDescription

Cleanout

Y/N

DimensionsGauge

F

A B C D EFinish Flange Nuts

in mm in mm in mm in mm in mm

PFPTB100 1-1/4 x 1-1/4 No 11 279.4 5 127.0 1-1/4 31.75 3 76.2 8 203 17 Chrome Box Brass

PFPTB101 1-1/4 x 1-1/4 Yes 11 279.4 5 1/4 133.3 1-1/4 31.75 3 76.2 8 203 17 Chrome Box Brass





PFPTB112 1-1/2 x 1-1/2 No 12 1/4 311.1 5 1/8 130.1 1 1/2 38.1 3 1/4 82.5 9 228.6 17 Chrome Shallow Brass

PFPTB102 1-1/4 x 1-1/4 semi-cast Yes 10 1/8 257.1 4 5/8 117.4 1-1/4 31.75 2 5/8 66.6 7 1/2 190.5 17 Chrome Shallow Zinc



PFPTB110 1-1/2 x 1-1/2 w/ground joint No 12 1/4 311.1 5 1/8 130.1 1 1/2 38.1 3 1/4 82.5 9 228.6 17 Chrome Box Brass

PFPTB111 1-1/4 x 1-1/2 w/ground joint No 12 1/4 311.1 5 1/8 130.1 1 1/2 38.1 3 1/4 82.5 9 228.6 17 Unfinished Box Brass

PFPTB105 1-1/4 x 1-1/2 w/ground joint No 10 3/4 273.0 5 1/8 130.1 1 1/2 38.1 3 1/4 82.5 7 1/2 190.5 17 Chrome Shallow Brass

PFPTB400 1-1/4 x 1-1/4 w/cast body Yes 11 1/8 282.5 4 5/8 117.4 1-1/4 31.75 2 5/8 66.6 8 1/2 215.9 17 Chrome Box Brass





PFPTB200 1-1/4 x 1-1/4 No 11 279.4 5 127.0 1-1/4 31.75 3 76.2 8 203 20 Chrome Box Zinc


PFPTB202 1-1/2 x 1-1/2 No 12 1/4 311.1 5 1/8 130.1 1 1/2 38.1 3 1/4 82.5 9 228.6 20 Unfinished Shallow Brass

PFPTB300 1-1/4 x 1-1/4 No 10 254.0 5 127.0 1-1/4 31.75 3 76.2 7 177.8 22 Chrome Box Zinc


For

Submittal

S-1 SINK

Page: 44 / 100

© 2013 Wolseley CAP June/13/2013

Warranty and CodesThis PROFLO product carries a 1-year limited warranty. ASME A112.18.1-2005/CSA B125.1-05

Distributed exclusively by Wolseley’s North American Division, Ferguson, Stock Building Supply and Wolseley Canada.

Low LeadCommercial and Heavy Duty Stops

LOWLEAD

COMPLIANT

PFXCAC32C

Product Features• Low lead brass body

• NSF 372 & cUPC approved

• Operating pressure 125psi maximum• Operating temperature 40°F-160°F• Low lead brass stem

Individual Stops PFXCAC32C* LF CP 5/8 comp X 3/8 comp angle stopPFXCAS32C* LF CP 1/2 SWT X 3/8 comp sply stopPFXCAZ32C LF CP1/2 SWT W/ EXT X 3/8 comp stop PFXCAT22C LF CP 3/8 IPS X 3/8 comp sply stopPFXCAT32C LF CP 1/2 IPS X 3/8 comp sply stopPFXCAT33C LF CP 1/2 IPS X 1/2 comp sply stop

Loose Key

PFXCAT22CLK LF CP 3/8 IPS X 3/8 comp stop loose keyPFXCAT32CLK LF CP 1/2 IPS X 3/8 comp stop loose keyPFXCAC32CLK* LF CP 5/8 comp X 3/8 comp stop loose keyPFXCAS32CLK* LF CP 1/2 SWT X 3/8 comp stop loose keyPFXCAZ32CLK LF CP 1/2 SWT W/ EXT X 3/8 comp stop loose key

PFXHAC32C* LF CP 5/8 comp X 3/8 comp stopPFXHAC32CLK* LF CP 5/8 comp X 3/8 comp stop loose keyPFXHAT32CLK LF CP 1/2 IPS X 3/8 comp stop loose keyPFXHATT33LK LF CP 1/2 IPS X 1/2 IPS comp stop loose key

Heavy Duty

PFXCAZ32CLK

PFXHAT32CLK

Model Numbers (*For use copper tube only)

Product Features

• Operatingtemperature:40-160°F• Operatingpressure:20-125PSI• Burstpressure:2000PSIat70°F• Nuts:heavydutynickelplatedbrass

orplastic(acetal)• Hosebarbs:lowleadbrass (longlength)

• Outerwirebraid: 304stainless\steelwire• Innerhose:HeavydutyreinforcedPVC

(600PSIburstpressureat70°F)• Washers:Santoprenerubber• Ferrules:lowleadbrass• Avarietyoflengthsfrom9”to84”• MadeinChina

PFX146205

Steel & PVC Braided Reinforced Flexible Connectors


Warranty and Codes

ThisPROFLOproductcarriesa1-yearlimitedwarranty.ASMEA112.18.6-2009.IAPMOlisted.


PF146/PFX146

Installation Instructions

• Forusewithwaterinaccessiblelocationsonly• Handtightenplus1/4turn.Plasticnutsarehandtightenonly. Donotovertightennuts.

• Checkforleaksbeforeleavingjobsite.• Inspectregularlyforgeneralfitnessandreplaceifdamaged, corroded,orworn.• Donotexposetocorrosivechemicals.

Product # Description cUPC UPC Low Lead Compliant Product # Description cUPC UPC Low Lead Compliant

PFX146202 PFX146430

PFX146205 PFX146432

PFX146207

PFX146222

PFX146462

PFX146224

PFX146463

PFX146232

PFX146471

PFX146302

PFX146472

PFX146303

PFX146473

PFX146304

PFX146474

PFX146306

PFX146322

PFX146492

PFX146323

PF146814

PFX146324

PF146815

PFX146326

PF146816

PFX146330

PFX146332

PFX146334

PFX146342

PFX146343

PFX146344 Product # Description cUPC UPC Low Lead Compliant

PFX146350 PFX146002

PFX146352 PFX146022

PFX146354 PFX146023

PFX146365 PFX146024

PFX146423 PFX146172

PFX146424 PFX146198

* With brass elbow

PVC CONNECTORS Product Certification

STAINLESS STEEL CONNECTORS Product Certification STAINLESS STEEL CONNECTORS Product Certification

3/8” C X 1/2” F X 20” Ice Maker


1/4” X 1/4” C X 60” Ice Maker









1/4” X 1/4” C X 24” Ice Maker

1/2” C X 1/2” F X 20” Sink

1/2" X 1/2" C X 84" Dish Washer*




3/8” X 3/8” C X 20” Sink

3/8” C X 1/2” F X 20” Sink

3/8” C X 1/2” F X 30” Sink

3/8” C X 1/2” F X 48” Sink

3/8” C X 1/2” F X 60” Sink

3/8” C X 1/2” F X 72” Sink

1/2” X 1/2” F X 30” Sink

1/2” X 1/2” F X 20” Sink

3/4” M X 3/4” F X 18” Water Heater



1/4” X 1/4” C X 84” Ice Maker

1/4” X 1/4” C X 60” Ice Maker





1/2” C X 1/2” F X 16” Sink

1/2” X 1/2” F X 12” Sink

1/2” X 1/2” F X 16” Sink

3/8” C X 1/2” F X 12” Sink

3/8” C X 1/2” F X 16” Sink

3/8” X 3/8” C X 12” Sink

3/8” X 3/8” C X 16” Sink

3/8” C X 1/2” F X 16” Sink

3/8” C X 1/2” F X 12” Sink

1/2" X 1/2" F X 12" Sink

S-1 SINK

Page: 46 / 100

PFE1

EscutcheonsStandard Type

© 2007 Wolseley 0371 10/07

Warranty and CodesThe PROFLO product carries a 1-year limited warranty.

Model NumbersIron pipe sizes (chrome plated)

PFE1 3/8”PFE2 1/2”PFE8 3/4”PFE9A 1”PFE10 1-1/4”PFE11 1-1/2”PFE16A 2”

Iron pipe sizes (polished brass)PFE2PB 1/2”PFE11PB 1-1/2”

Copper tube sizes (chrome plated)PFE7 5/8” ODPFE9 7/8” OD

Copper tube sizes (polished brass)PFE7PB 5/8” OD

Product Features• Fits iron pipe and copper tube• Chrome plated steel and polished brass

S-1 SINK

Page: 47 / 100

P-TRAP & SUPPLY INSULATION KITS

■■ Model #99 E-ZOne angle valve and supply cover__________________■■ Model #100 E-ZOne P-trap cover_________________■■ Model #400W*One P-trap cover_________________■■ Model #101 E-ZOne P-trap cover, one anglevalve cover_________________■■ Model #401W*One P-trap cover, one anglevalve cover

General Description:LAV GUARD® 2E-Z Series waste and supply piping covers satisfy ADA compliance requirements. Built-inE-Z Grip internal fasteners and internal, E-Z Tear-To-Fittrimming feature allow for fast installation without tools.Series #100 E-Z kits are designed to fit on all tubularand cast brass P-trap assemblies. Series #400 kitsare the “original” LAV GUARD design and fit schedule 40ABS and PVC P-trap assemblies — regardless of theirgeometry or rotational offset. Valve cover completelyencloses angle valve and supply tube for both handledand keyed type water stops.____________________________________________Material Molded vinyl____________________________________________Nominal Wall 1/8" constant____________________________________________Durometer 70 -80 - Shore A____________________________________________UV Protection Will not fade or discolor____________________________________________Durability Virtually indestructible____________________________________________Trimming (E-Z Series) Internal, E-Z Tear-To-Fit

trim feature____________________________________________Fasteners (E-Z Series) Internal E-Z Grip fasteners

(reusable)____________________________________________Color China white____________________________________________Paintability Apply Latex paint____________________________________________Burning Characteristics Self extinguishedASTM D-635 0 sec (ATB) 0 mm (AEB) ____________________________________________Bacteria/Fungus ASTM G21 and G22/Resistance Result: 0 growth ____________________________________________Maintenance Use common detergents____________________________________________

Submittal Sheet

ADA-compliant undersink protection

TRUEBRO reserves the right to make product and material changes at any time without notice. 2 / 07

IPS Corporation, 202 Industrial Park Lane, Collierville, TN 38017(901) 853-5001 (800) 340-5969 FAX: (901) 853-5008e-mail: [email protected] Internet: http://www.truebro.com

Job/Location ________________________________________Designer _________________________________________

■■ Model #102 E-ZOne P-trap cover, two angle valvesand covers___________________■■ Model #402W*One P-trap cover, two angle valvesand covers___________________■■ Model #103 E-ZOne P-trap cover, two angle valvesand supply covers, one 5" offsettailpiece wheelchair strainer cover___________________■■ Accessory #105 E-ZOne 5" offset tailpiece wheelchairstrainer assembly

#100 E-Z Series (shown above right) for tubular and cast brass P-trap assemblies.#400W * Series (original design) for schedule 40 P-trap assemblies.

Manufactured under one or more of the following U.S. or Canadian patents.Other patents pending.5,303,730 5,360,031 5,524,669 5,564,463 5,678,598 5,699,828 5,915,4125,915,413 5,901,739 5,960,820 2,075,324 2,119,427 2,136,027 2,158,083

10" waste arm cover with internalE-Z Tear-To-Fit trim feature

9" supply tube cover with internal E-Z Tear-To-Fit trim grooves

J-bend covers all tubular and cast brass

configurations

Internal ribs add cushioning and thermal resistance

10" tailpiece cover

E-Z Tear-To-Fit trim grooves

E-Z Grip internal fasteners

Vent hole keeps P-trap dry

Vent slots keepvalve dry

Install over pipes. Press fingerrecesses to engageinternal fasteners.To remove covers,firmly pull seamapart using a strong grip.

Tear-to-fit on internal

dimensioned tear lines.

■■ Accessory #105-KKohler 6" offset____________________■■ Accessory #106 E-ZOne basket strainer cover and offsetwaste cover (adjustable to 18")____________________■■ Accessory #107 E-ZTwo basket strainer covers and centeror end outlet waste cover (adjustable)____________________■■ Accessory #Ex99 E-ZOne 16" extension for water supply____________________■■ Accessory #Ex100 E-ZOne 16" extension for drain wastearm or tailpiece

Center OutletAccessory 106 E-Z

End Outlet

Accessory 107 E-Z(Configuration Options Shown)

Accessory 105 E-Z

Shown with Accessory #105 E-Z (fits all standard 5" offsetwheelchair strainers). Accessories105 E-Z,106 E-Z, and 107 E-Zcan be purchased separately.

NOTE: Accessory #105 E-Z is included in #103 E-Z kits.

E-ZSeriesShown

*All #400W series items are the “original” LAVGUARD® design andconstruction. Specifications may change without notice.

Lav Guard2 Sbmttl 2-07 2/7/07 2:22 PM Page 1

ALT 7 ANTI FLOOD BACKFLOW ASSEMBLY

Zurn Industries, LLC | Wilkins1747 Commerce Way, Paso Robles, CA U.S.A. 93446 � Ph. 855-663-9876, Fax 805-238-5766

In Canada | Zurn Industries Limited3544 Nashua Drive, Mississauga, Ontario L4V 1L2 � Ph. 905-405-8272, Fax 905-405-1292

www.zurn.com

Rev. D

Date: 11/14

Document No. BF-375

Patent No. 5, 913, 331

Product No. Model 375

Model 375Reduced Pressure Principle Assembly

Page 1 of 2

Options(Suf! xes can be combined)c - with NRS shut-off valves (standard)

c FS - with cast iron wye type strainer (flanged only)

c � FSC - with epoxy coated wye type strainer (flanged only)

c G - with grooved end NRS gate valves

c � GF - with grooved inlet gate connection and flanged

outlet gate connection

c FG - with flanged inlet gate connection and grooved

outlet gate connection

c L - less shut-off valves (flanged body connections)

c MS - with Integral Relief Valve Monitor Switch

c OSY - with OS&Y gate valves

c PI - with Post Indicator gate valve (3" - 10")

c DOM - with Clow gate valves, 51% Buy American

Act Compliant

Accessoriesc Repair kit (rubber only)

�c Thermal expansion tank (Model XT)

c OS & Y Gate valve tamper switch (OSY-40)

c Air gap (Model AG)

c Electronic Solenoid Timer (Model EST)

c � QT-SET Quick Test Fitting Set

� � � � �� ! � � �� " �� # � � � � � � $ �� " �� % & ' ( ( % & ' ( ( % & ' ( ( % & ' ( ( % & ' ( ( % & ' ( ( % & ' ( ( % & ' ( ( % & ' ( ( % & ' ( ( % & ' ( ( ) * + ' , - ) * + ' , - ) * + ' , -. / 0 . 1 2 3 / 4 5 4 / 2 4 0 5 6 7 3 4 / 0 6 / 5 6 3 3 0 6 8 2 / 1 3 0 5 6 / 1 / 3 4 0 5 3 2 . / / 3 0 5 . 5 8 8 / 0 . . 6 / 5 3 0 5 . / 3 6 / / 0 6 / 7 6 5 1 7 . 4 ' . / 1 . 4 3 ' 2 / 4 7 4 4 ' .3 5 7 3 . 5 / 3 / 2 4 0 5 6 7 3 4 / 0 6 / 5 6 3 3 0 6 8 2 / 5 4 0 5 6 4 8 / 2 2 0 5 3 8 4 / . 3 0 5 3 / 6 8 / 0 . . 6 / 5 3 0 5 . / 3 6 . 3 0 6 / 7 5 1 1 7 . 4 ' . / 5 6 5 3 ' 2 / 8 7 5 1 ' 36 / 7 7 3 4 2 0 5 8 2 1 / 8 / 0 . 6 8 2 5 . 7 3 6 / 0 . / / 6 . . 3 0 6 2 4 5 / 5 / 0 6 6 1 6 / 6 3 0 6 3 4 2 / / . 4 8 8 / 0 6 . 3 2 2 . 3 0 6 / 3 6 7 8 5 6 6 ' 2 . 4 5 / . 1 ' 2 . 5 5 / 3 7 ' 51 / 2 7 6 6 3 0 6 / / 3 4 . 3 / 0 . 2 8 4 / 7 . 2 6 1 / 2 . 3 7 / 0 5 4 1 2 . 3 3 0 6 1 7 3 / 8 6 5 3 / . 3 0 5 3 / 6 / 7 3 0 6 . 4 3 1 . 3 0 6 / 2 8 6 / 4 2 4 8 ' 2 6 2 8 . 7 5 ' 6 6 4 2 . / 2 ' 15 . 7 7 1 7 3 0 6 / 2 6 3 3 4 3 0 6 8 2 8 / / . 4 8 / 7 . 2 6 3 4 3 0 6 8 2 8 . 8 / 0 6 4 6 3 . . / 0 . 2 4 . / 2 3 0 5 3 8 / / 1 3 0 6 6 . 1 5 2 . / 2 8 3 4 4 / 4 / 5 . 8 3 4 1 ' 6 5 2 3 3 5 4 ' 3/ 7 . 2 7 1 3 3 0 6 / 1 / 8 3 4 3 0 6 8 2 8 / / . 4 8 / 7 . 2 6 6 2 3 0 6 / / 1 . 3 2 3 0 5 5 8 8 . 1 / 0 . 1 4 3 / 2 3 0 5 3 8 / / 1 3 0 6 6 . 1 8 3 / 0 6 . 3 1 8 6 7 4 / 5 2 / / 1 4 2 3 7 / . . 2 2 2 1

Relief Valve discharge port:2 1/2" - 6" - 2.75 sq. in.

8" - 10" - 3.69 sq. in.

Attention: Model 375 (flange body) and Model

375A (grooved body) have different lay lengths.

E

F

CDB

E

F

GCD

G

A

B

H

A

MODEL 375OSYG SHOWN ABOVEDimensions & Weights (do not include pkg.)

ApplicationDesigned for installation on potable water lines to protect

against both backsiphonage and backpressure of contami-

nated water into the potable water supply. The Model 375

provides protection where a potential health hazard exists.

Ideal for use where lead-free* valves are required

Standards Compliance(Unless Otherwise Noted, Sizes 2 1/2" Thru 10")• ASSE® Listed 1013

• IAPMO® Listed

• Certified to NSF/ANSI 372* by IAPMO R&T

• CSA® Certified B64.4 (2 1/2" thru 8")

• AWWA Compliant C511, and C550

• FM® Approved

• UL® Classified

• C-UL® Classified

• NYC MEA 49-01-M Vol 2

• Approved by the Foundation for Cross Connection

Control and Hydraulic Research at the University of

Southern California.

• NSF® Listed-Standard 61, Annex G*9 : ; < = > ? @ A B < C D E F G H D I A J D K A F D L D A I M N O H D O H PMaterialsMain valve body Ductile Iron ASTM A 536 Grade 4

Access covers Ductile Iron ASTM A 536 Grade 4

Coatings FDA Approved fusion epoxy finish

Internals Stainless steel, 300 Series

NORYL™, NSF Listed

Fasteners Stainless Steel, 300 Series

Seal rings EPDM (FDA approved)

O-rings Buna Nitrile (FDA approved)

Springs Stainless Steel, 300 Series

Sensing line Stainless Steel, braided hose

FeaturesSizes: � 2 1/2", 3", 4", 6", 8", 10"

Maximum working water pressure 175 PSI

Maximum working water temperature 140°F

Hydrostatic test pressure 350 PSI

End connections (Grooved for steel pipe) AWWA C606

(Flanged) ANSI B16.1

Class 125

Q R S T U V W X Y Z T [ S R \ W ] [ ^ T U \ _ R ` ` a X b R W R c T d e ] T [ fFlow Characteristics

Zurn Industries, LLC | Wilkins1747 Commerce Way, Paso Robles, CA U.S.A. 93446 � Ph. 855-663-9876, Fax 805-238-5766

In Canada | Zurn Industries Limited3544 Nashua Drive, Mississauga, Ontario L4V 1L2 � Ph. 905-405-8272, Fax 905-405-1292

www.zurn.com Page 2 of 2

g h i j k l m n o p q o r s l r t u r v w x y z i y { i t g j x { | } ~��

� � � � � � � � � � � � �� ¡¢ £¤ � ¥¤ ¦� § � ¤ ¨ § ¢ ¨ ¡ § ¨ © § £ ¡ � § ¡ª « ¬ ® ¯ ° ± ² ³ ´ µ ¶ ·¹̧º»»¼¹º½¾»» ¿À ÁÂÃ

Ä Å Æ Ç È É Ê Ë Ì Í Î Ï Í Ð Ñ Ò Í Ó Ô Õ Ö × Æ Ö Ø Æ Ð Ä Ç Õ Ø Ù Ú ÛÜÝÞ ÜÞ Ýß Ü

Ü Þ Ü Ü Ü ß Ü Ü Ü à Ü Ü Ü á Ü Ü Üâ ã ä å æ ç è é ê ë ì í î ïðñòóóôñòõöóó ÷ðóøùú ûü ýþ ÿ� û �� ü �û � û þ ü � � � � þ � � � � ÿ � ü � ý � � �â ã ä å æ ç è é ê ë � � � ï��

Typical Installation

Local codes shall govern installation requirements. Unless

otherwise specified, the assembly shall be mounted at a

minimum of 12" (305mm) and a maximum of 30" (762mm)

above adequate drains with sufficient side clearance for test-

ing and maintenance. The installation shall be made so that

no part of the unit can be submerged.

Speci! cationsThe Reduced Pressure Principle Backflow Prevention Assembly shall be certified to NSF/ANSI 372, ASSE® Listed 1013, and

supplied with full port gate valves. The main body and access cover shall be epoxy coated ductile iron (ASTM A 536 Grade

4), the seat ring and check valve shall be NORYL™, the stem shall be stainless steel (ASTM A 276) and the seat disc elasto-

mers shall be EPDM. The checks and the relief valve shall be accessible for maintenance without removing the device from

the line. The Reduced Pressure Principle Backflow Prevention Assembly shall be a ZURN WILKINS Model 375.

OUTDOOR INSTALLATIONINDOOR INSTALLATION (375GF)

� � � � � � � � � � � � � � � � � ! � " # $ � � � % & $ ' ($ � � � ) � * � + , � - ) � � . / + , � - ) � � 0 # , � - ) � � 0 + , � - ) � �1 0 - 1 2 . + 0 0 1 0 " 3 1 1 "4 2 0 0 + 0 . 4 1 4 # 4 " 5" 2 0 3 6 1 3 6 4 3 . + 3 +5 2 " + # 5 . + 3 # # 0 4 + 06 2 . 6 # 0 0 5 3 0 + + 3 1 4 4 30 # 2 0 1 1 3 0 6 " 4 1 " + 6 4 5 6 .0 1 2 0 . 5 4 1 5 " " 4 + 1 + + 1 6 6PROTECTIVE

ENCLOSURE

DIRECTION OF FLOW

12" MIN.

30" MAX.

AIR GAP

W/DRAIN

DIRECTION OF FLOW

12" MIN.

30" MAX.

7 8 9 : ; < 8 = = >? 9 : ; 8 8 = = >@ 9 : 7 < 8 = = >; 7 A ; 9 : @ < = = > B 9 : ? 8 = = > C 9 : 7 8 8 = = >

BERMAD Waterworks

Solenoid ControlledValve

700 SeriesModel 710

The Model 710 Solenoid Controlled Valve is ahydraulically operated, diaphragm actuated controlvalve that either opens fully or shuts off in response toelectric signals.For very low pressure applications, refer to theFull Powered Opening and Closing Model 710-B.

■ Network management optimizing

■ Pressure zone isolating

■ Burst excess flow shut-off

■ Reservoir overflow safety backup

■ Switching between "on-duty" valves

■ Automatic refreshing of reservoirs

Features and Benefits

■ Line pressure driven❑ Independent operation❑ No motor required❑ Long term drip tight sealing

■ Solenoid controlled❑ Low power consumption❑ Low cost wiring❑ Wide ranges of pressures and voltages❑ Normally Open, Normally Closed or Last Position

■ In-line serviceable – Easy maintenance■ Double chamber

❑ Full powered opening (option “B”) & closing❑ Non-slam closing characteristic❑ Protected diaphragm

■ Semi-straight flow – Smooth flow characteristics■ "Y" or angle, wide body – Minimized pressure loss■ Flexible design – Easy addition of features

Major Additional Features

■ Full powered opening & closing – 710-B■ Check feature – 710-20■ Opening & closing speed control – 710-03■ Relief override – 710-3Q■ Flow over the seat (fail-safe close) – 710-O■ Closing surge prevention – 710-49

See relevant BERMAD publications.

BERMAD Waterworks700 Series

Model 710

Engineer Specifications

The Solenoid Controlled Valve shall either open fully or shut off in response to electric signals.

Main Valve: The main valve shall be a center guided, diaphragm actuated globe valve of either oblique (Y) or angle patterndesign. The body shall have a replaceable, raised, stainless steel seat ring. The valve shall have an unobstructed flow path,with no stem guides, bearings, or supporting ribs. The body and cover shall be ductile iron. All external bolts, nuts, and studsshall be Duplex® coated. All valve components shall be accessible and serviceable without removing the valve from the pipeline.

Actuator: The actuator assembly shall be double chambered with an inherent separating partition between the lower surfaceof the diaphragm and the main valve. The actuator assembly shall not consist of any closing spring nor spring-like device. Theentire actuator assembly (seal disk to top cover) shall be removable from the valve as an integral unit. The stainless steel valveshaft shall be center guided by a bearing in the separating partition. The replaceable radial seal disk shall include a resilientseal and shall be capable of accepting a V-Port Throttling Plug by bolting.

Control System: The control system shall consist of a 3-Way solenoid pilot valve (for 10” and larger valves, an accelerator shallbe added to the solenoid), an isolating cock valve, and a filter. The assembled valve shall be hydraulically tested.

Quality Assurance: The valve manufacturer shall be certified according to the ISO 9001 Quality Assurance Standard. The mainvalve shall be certified as a complete drinking water valve according to NSF, WRAS, and other recognized standards.

Operation

The Model 710 is a solenoid controlled valve equipped with a 3-Way solenoid pilot.The normally open solenoid [1] applies pressure to the upper control chamber [2], harnessing valve differential pressure to powerthe diaphragm actuator, closing the main valve. Energizing the solenoid vents control chamber pressure, causing the main valveto open fully. The lower control chamber [3] is open to the atmosphere.In cases where pipeline water is contaminated (corrosive, debris laden) external control fluid is often used.For 10” and larger valves, an accelerator [4] quickens valve response.

Valve Closing

Size Range 11/2-8” Size Range 10-20”

[4]

[2]

[1]

[3]

[1]

[2]

[3]

Valve Closing


Model 710

Typical Applications

Complex Distribution Networks

In complex distribution networks, management optimization of sources and consumers is essential:■ Sources are of various qualities and costs■ Source quality varies throughout the year■ Consumers demand various qualities■ Zones require isolation for maintenance■ Burst occurrence requires management■ Reservoirs call for systematic refreshingThe Model 710 is well suited to meet all the above needs and more. It should be included for placement in multiple locationsduring the design stage or with changing needs.

Supply

[V1]

[V3]

[V4]

[V2]

[V5]Filtration Process Control Valves:

[V1] Untreated water inlet - Model 710 (N.O.)

[V2] Treated water outlet - Model 770-55-U (N.O.)

[V3] Back flushing inlet - Model 710 (N.C.)

[V4] Back flushing outlet - Model 727-55-U (N.C.)

[V5] Rinse water outlet - Model 727-55-U (N.C.)

[V6] Scrubbing level drain - Model 710-B (N.C.)

[V7] Air scrubbing inlet - Model 710-B (N.C.)

[V6] [V7]

Drain

To system

See relevant BERMAD publications.

Filtration Systems

In a filter battery installed as part of a water treatment system, each filter requires periodic back flushing. This process entailsreversing the direction of flow through each filter. Two Model 710 valves [V1] & [V3], installed upstream from each filter, enablethis reversal. The "untreated water valve" [V1] is Normally Open and the "back flushing inlet valve" [V3] is Normally Closed.

Technical DataDimensions and Weights


Model 710

- - - - - -

Waterworks Epoxy FB Blue EBPolyester Green PGPolyester Blue PBUncoated UC

AdditonalAttributes

I

Tubing& Fittings

CB

Voltage &Position

4AC

Coating

EB

EndConnections

16

BodyMaterial

C

Pattern

Y

AdditionalFeature

00

Sector

WW

Ductile Iron Standard CCast Steel SSt. Steel 316 NNickel Alumin. Bronze U

ISO-16 16ISO-25 25ANSI-150 A5ANSI-300 A3JIS-16 J6JIS-20 J2

Double Chamber BValve Position Indicator ILarge Control Filter FElectric Limit Switch SFlow Over the Seat OSt. St. 316 Control Accessories NSt. St. 316 Internal Trim (Closure & Seat) TSt. St. 316 Actuator Internal Assembly DDelrin Bearing RViton Elastomers for Seals & Diaphragm EPressure Gauge 6

Oblique (up to 20”) YAngle (up to 18”) AGlobe (24-32” only) G

How to OrderPlease specify the requested valve in the following sequence: (for more options, refer to Ordering Guide)

PrimaryFeature

710

Solenoid Controlled11/2 - 32”

Size

6”

Main ValveValve Patterns: “Y” (globe) & angleSize Range: 11/2–32” (40-800 mm)End Connections (Pressure Ratings):Flanged: ISO PN16, PN25(ANSI Class 150, 300)Threaded: BSP or NPTOthers: Available on requestWorking Temperature:Water up to 80°C (180°F)Standard Materials:Body & Actuator: Ductile IronInternals:Stainless Steel, Bronze & coated SteelDiaphragm:NBR Nylon fabric-reinforcedSeals: NBRCoating:Fusion Bonded Epoxy, RAL 5005 (Blue)NSF & WRAS approved or ElectrostaticPolyester Powder, RAL 6017 (Green)

Control SystemStandard Materials:Accessories:Bronze, Brass, Stainless Steel & NBRTubing: Copper or Stainless SteelFittings: Forged Brass or Stainless SteelSolenoid Standard Materials:Body: Brass or Stainless SteelElastomers: NBR or FPMEnclosure: Molded epoxySolenoid Electrical Data:Voltages:(ac): 24, 110-120, 220-240, (50-60 Hz)(dc): 12, 24, 110, 220Power Consumption:(ac): 30 VA, inrush; 15 VA (8W), holding or70 VA, inrush; 40 VA (17.1W), holding(dc): 8-11.6W

Values might vary according to specific solenoid model

10 100 1,000 10,000

0.1

0.2

0.3

0.4

0.50.60.70.80.91.0

1

2

3

4

56789

10

100 1,000 10,000

Flow Rate - m3/h

Pre

ssu

re L

oss

- b

ar

Pre

ssu

re L

oss

- p

si

Flow Rate - gpm

1.5"

2"

2.5"

3"

4"

6"

8"

10"

12"

14"

16"

18"

20"

28"

50 500 5,000

50 500 5,000

30"

32"

24”

Flow Chart

Data is for Y-pattern, flat disk valvesFor more flow charts, refer to Engineering Section

No Additional Feature 00Closing and Opening Speed Control 03Check Valve 20Relief Override 3QClosing Surge Prevention 49

Copper Tubing & Brass Fittings CBPlastic Tubing & Brass Fittings PBSt. St. 316 Tubing & Fittings NN

24VAC/50Hz - N.C. 4AC24VAC/50Hz - N.O. 4AO24VDC - N.C. 4DC24VDC - N.O. 4DO24VDC - L.P. 4DP220VAC/50-60Hz N.C. 2AC220VAC/50-60Hz N.O. 2AO

Multiple choices permitted Multiple choices permitted

Size A, B C L H Weightmm

40

50

65

80

100

150

200

250

300

350

400

450

500

inch

11/2”

2

21/2”

3”

4”

6”

8”

10”

12”

14”

16”

18”

20”

mm

350

350

350

370

395

430

475

520

545

545

645

645

645

inch

14

14

14

15

16

17

19

21

22

22

26

26

26

mm

180

180

180

230

275

385

460

580

685

685

965

965

965

inch

7

7

7

9

11

15

18

23

27

27

38

38

38

mm

205

210

222

250

320

415

500

605

725

733

990

1000

1100

inch

8.1

8.3

8.7

9.8

12.6

16.3

19.7

23.8

28.5

28.9

39.0

39.4

43.3

mm

239

244

257

305

366

492

584

724

840

866

1108

1127

1167

inch

9.4

9.6

10.1

12.0

14.4

19.4

23.0

28.5

33.1

34.1

43.6

44.4

45.9

kg

9.1

10.6

13

22

37

75

125

217

370

381

846

945

962

lbs

20

23

29

49

82

165

276

478

816

840

1865

2083

2121

H

L

C

A

B

Accelerator Standard Materials:Body: Brass or Stainless SteelInternals: Stainless Steel & BrassElastomers: NBR or FPM

Data is for Y-pattern, flanged, PN16 valvesWeight is for PN16 basic valves“C” enables removing the actuator in one unit“L”, ISO standard lengths availableFor more dimensions and weights tables, refer to Engineering Section

Solenoid Selection

Accelerator Model

Valve Size

Solenoid Model

11/2-8”

11/2-6”

10-20”

8-20”

24 -32”

24 -32”

330(2.0 mm)

311(1.0 mm) 54 58

PN 16 PN 25

The information herein is subject to change without notice. BERMAD shall not be held liable forany errors. All rights reserved. © Copyright by BERMAD. PC7WE10-10 05

i n f o @ b e r m a d . c o m • w w w . b e r m a d . c o m

Products

Pipe & FittingsValves & AutomationFiltration & SeparationTubing & HosePiping Tools & AccessoriesInstrumentationPumpsTanks & AccessoriesSheet, Structural & Grating

Solutions for

Aquatic SupportBiopharmChemicalFood ProcessingIndustrialMetal FinishingPetrochemicalPulp & PaperSemiconductorWater Park & PoolWater Treatment

Company Info

About HarringtonContact usOur Mission StatementEmployment OpportunitiesExport Compliance

Tech Library

18th Edition CatalogChemical Resistance GuideEngineering HandbookLiterature Request

Business Partners

Harrington PureE&S TechnologiesSED North America

Products » Tanks » Rectangular Tanks » Open Top Tanks

These tanks are designed with heavy walls for long service under severe conditions. Straight sides allow maximum use of space. Our tanks areused in dozens of industries for plating, processing and storage. One piece moldedno seams to leak. Excellent impact and chemical resistance.Resin complies with U.S. Food and Drug Administration regulation 177.1520 (c) 3.1 and 3.2. Translucent for visible contents level. RectangularTanks with a height greater than 18" must be supported. FPR encased tanks are designed to completely support our rectangular tanks, requiringno maintenance.

90 Gallon Natural White Polyethylene RectangularTank

A Series Polyethylene (PE) Operating temperatures upto 140° F.B Series Polypropylene (PP) Operating temperaturesup to 212° F. Not recommended for impact or lowtemperature applicationsC Series FRP Encased Polyethylene (PE)D Series FRP Encased Polypropylene (PP)

Item # R243624A

Type of productRectangular Tank

SeriesA

Product ColorNatural White

ManufacturerChemtainer

MaterialPolyethylene

CategoryRequest Information

Home Products Solutions For Company Info Store Finder

https://store.hipco.com/viewCategory?id=HOME-PIPE-FITTINGS

https://store.hipco.com/viewCategory?id=HOME-VALVES-ACCESSORIES

https://store.hipco.com/viewCategory?id=HOME-FILTRATION-SEPARATION

https://store.hipco.com/viewCategory?id=HOME-TUBING-HOSE

https://store.hipco.com/viewCategory?id=HOME-PIPE-TOOLS

https://store.hipco.com/viewCategory?id=HOME-INSTRUMENTATION

https://store.hipco.com/viewCategory?id=HOME-PUMPS

https://store.hipco.com/viewCategory?id=HOME-TANKS

https://store.hipco.com/viewCategory?id=HOME-GRATING-SHEET-STRUCTURALS

http://www.hipco.com/Aquatic.cfm

http://www.hipco.com/Biopharm.cfm

http://www.hipco.com/Chemical.cfm

http://www.hipco.com/Food.cfm

http://www.hipco.com/Industrial.cfm

http://www.hipco.com/metal.cfm

http://www.hipco.com/petrochemical.cfm

http://www.hipco.com/Paper.cfm

http://www.hipco.com/Semiconductor.cfm

http://www.hipco.com/pool.cfm

http://www.hipco.com/water.cfm

http://www.hipco.com/About.cfm

http://www.hipco.com/contact.cfm

http://www.hipco.com/mission.cfm

http://www.hipco.com/hropenjobs-public/HR_index.cfm

http://www.hipco.com/ExportCompli.html

http://viewer.zmags.com/publication/2e869269#/2e869269/1

http://www.hipco.com/ChemGuide.cfm

http://www.hipco.com/Engineering_Disclaimer.cfm

http://www.hipco.com/LiteratureReq.cfm

http://www.hipco.com/Semiconductor.cfm

http://www.es-technologies.com/

http://www.sed4valves.com/

https://store.hipco.com/viewCategory?id=HOME

https://store.hipco.com/viewCategory?id=HOME-TANKS

https://store.hipco.com/viewCategory?id=HOME-TANKS-RECTANGULAR

https://store.hipco.com/viewCategory?id=HOME-TANKS-RECTANGULAR-OPEN

http://www.hipco.com/index.cfm

https://store.hipco.com/

http://www.hipco.com/about.cfm

http://www.hipco.com/storefinder.cfm

project: date: to: re: attn: job: we are …pix.ghphipps.com/projects/2015/15.0732/projdocs/06 -...

Documents