www.studioefabrics.net

Fabric Requirements Additional Supplies Needed

Featuring fabrics from the Pumpkin Spice collection by Nancy Archer for

PROCESS COLOR:

GRAYSCALE:

B/W:

Batting 63” x 63” (Recommended: Air Lite® Colour Me 100% Cotton)Piecing and sewing threadQuilting and sewing supplies

QUILT 1

Quilt designed by Heidi PridemoreFinished Quilt Size 54 ½" x 54 ½"Skill Level: Advanced Beginner

* Includes Binding** Peppered Cottons Collection

Pumpkin SpicePumpkin SpiceA Free Project SheetNOT FOR RESALE

(A) 5148P-36 ........... 1 panel(B) Green Tea-22** 1 yard*(C) 5156-47 .............. ⅝ yard(D) 5154-87 .............. ⅝ yard(E) 5147-24 .............. ¼ yard(F) 5150-84 .............. 1 ¾ yards(G) 5145-84 .............. ⅝ yard

(H) 5149-46 ............. ⅝ yard(I) 5152-48 ............... ⅝ panelBacking 5146-14 ............... 3 ½ yards

Please check our website for pattern updates before starting this project.

www.studioefabrics.net•STUDIO e PROJECTS• Page 2 of 7

Fabrics in the Collection

Select Fabric from Peppered Cottons

Craft Panel - Multi5144P-48

Mini Quilt - Multi5148P-36

Border Stripe - Multi5150-84

Large Tossed PumpkinsRed – 5145-84

Small Tossed PumpkinsMulti – 5146-14

Textured Leaves - Orange5147-24

Tossed Pears - Cream5149-46

Tossed Leaves - Red5151-84

Cream Berries - Orange5152-48

Tossed Scrolls - Cream5153-46

Tossed Berries - Multi5154-87

Soft Leaves - Cream5156-47

Green TeaGreen Tea-22

www.studioefabrics.net•STUDIO e PROJECTS• Page 3 of 7

CuttingCutting InstructionsPlease note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

WOF= Width of Fabric • LOF = Length of Fabric

Fabric A (5148P-36 Mini Quilt – Multi):• Fussy cut (1) 20” square centered on (1) panel

Fabric B (Green Tea-22 Peppered Cottons – Green Tea), cut:• (6) 2 ½” x WOF strips for the binding.• (1) 2” x WOF strip, sub-cut (2) 2” x 20” strips.• (2) 2” x 23” WOF strips.• (3) 1 ¼” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ¼” x 47” strips.• (3) 1 ¼” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ¼” x 45 ½” strips.

Fabric C (5156-47 Soft Leaves – Cream), cut:• (1) 4 ⅜” x WOF strip, sub-cut (2) 4 ⅜” squares.• (3) 4” x WOF strips, sub-cut (24) 4” squares.

Fabric D (5154-87 Tossed Berries – Multi), cut:• (1) 4 ⅜” x WOF strip, sub-cut (2) 4 ⅜” squares.• (3) 4” x WOF strips, sub-cut (12) 4” x 7 ½” strips.

Fabric E (5147-24 Textured Leaves – Orange), cut:• (2) 1 ¼” x 30” WOF strips.• (2) 1 ¼” x 28 ½” WOF strips.

Fabric F (5150-84 Border Stripe – Multi):• Fussy cut (4) 4 ½” x 59” LOF strips each centered on a wide stripe.• Fussy cut (4) 3 ¼” x 39” LOF strips each centered on a narrow stripe.

Fabric G (5145-84 Large Tossed Pumpkins – Red), cut:• (3) 5 ½” x WOF strips, sub-cut (16) 5 ½” squares.

Fabric H (5149-46 Tossed Pears – Cream), cut:• (3) 5 ½” x WOF strips, sub-cut (16) 5 ½” squares.

Fabric I (5152-48 Cream Berries – Orange), cut:• (5) 3” x WOF strips, sub-cut (64) 3” squares.

Backing (5146-14 Small Tossed Pumpkins – Multi), cut:• (2) 63” x WOF strips. Sew the strips together and trim to 63” x 63” to make the back.

www.studioefabrics.net•STUDIO e PROJECTS• Page 4 of 7

SewingSew using a ¼” seam allowance with right sides together (RST) unless otherwise indicated. Always

press towards the darker fabric while assembling, unless otherwise noted by the arrows.

Fig. 2

Fig. 1

Fig. 3 Fig. 4

Fig. 5 Fig. 8Fig. 6 Fig. 7

Block Assembly Note: Pay attention to the unit orientations when assembling the various components.1. Sew (1) 2” x 20” Fabric B strip to each side of the 20” Fabric A square. Sew (1) 2” x 23” Fabric B strip to the top and to the bottom of the Fabric A square. Trim the block to measure 21 ½” square to make the Center Block (Fig. 1).

B

ATrim blockto measure

21 ½” x 21 ½”AFTER adding

borders

B

B B

Center Block

Unit 1make 4

CD

Unit 2make 12

DC C

2. Place (1) 4 ⅜” Fabric C square on top of (1) 4 ⅜” Fabric D square, right sides together. Draw a line across the diagonal of the top square (Fig. 2). Sew ¼” away from each side of the drawn diagonal line (Fig. 2). Cut the (2) squares apart on the drawn diagonal line (Fig. 3) to make (2) half-square triangles. Trim the half-square triangles to measure 4” square to make (2) Unit 1 squares (Fig. 4). Repeat to make (4) Unit 1 squares total.

3. Place (1) 4” Fabric C square on the left side of (1) 4” x 7 ½” Fabric D strip, right sides together (Fig. 5). Sew across the diagonal of the square from the upper right corner to the lower left corner (Fig. 5). Flip open the triangle formed and press (Fig. 6). Trim away the excess fabric from behind the triangle, leaving a ¼” seam allowance.

4. Place another 4” Fabric C square on the right side of the 4” x 7 ½” Fabric D strip, right sides together (Fig. 7). Sew across the diagonal of the square from the upper left corner to the lower right corner (Fig. 7). Flip open the triangle formed and press. Trim away the excess fabric from behind the triangle, leaving a ¼” seam allowance to make (1) Unit 2 strip (Fig. 8).

5. Repeat Steps 3-4 to make (12) Unit 2 strips total.

www.studioefabrics.net•STUDIO e PROJECTS• Page 5 of 7

Fig. 9 Fig. 10 Fig. 12Fig. 11

Fig. 14Fig. 13 Fig. 15

Unit 3make 16

H

I I

I I

Unit 2

Unit 2

Unit 2

Inner Side Bordermake 2

Unit 2 Unit 2 Unit 2Unit1

Unit1

Inner Top/Bottom Bordermake 2

Unit3

Unit3

Unit3

Unit3

Outer Side Bordermake 2

G

G

G

6. Place (1) 3” Fabric I square on the top left corner of (1) 5 ½” Fabric H square, right sides together (Fig. 9). Sew across the diagonal of the smaller square from the upper right corner to the lower left corner (Fig. 9). Flip open the triangle formed and press (Fig. 10). Trim away the excess fabric from behind the triangle ¼” away from the sewn seam.

7. Follow Figure 11 for the seam direction to add a 3” Fabric I square to each of the remaining corners of the 5 ½” Fabric H square to make (1) Unit 3 square (Fig. 12).

8. Repeat Steps 6-7 to make (16) Unit 3 squares total.

9. Sew (3) Unit 2 strips together end to end to make (1) Inner Side Border (Fig. 13). Repeat to make a second Inner Side Border.

10. Sew (3) Unit 2 strips together end to end. Sew (1) Unit 1 square to each end of the newly sewn strip to make the Inner Top Border (Fig. 14). Repeat to make the Inner Bottom Border.

11. Sew (4) Unit 3 squares and (3) 5 ½” Fabric G squares together, alternating them, to make (1) Outer Side Border (Fig. 15). Repeat to make a second Outer Side Border.

www.studioefabrics.net•STUDIO e PROJECTS• Page 6 of 7

Quilt To

p

Folded on

the D

iagonal

Fig. 16

Fig. 17

Quilt Top Assembly (Follow the Quilt Layout while assembling the quilt top.)13. Sew (1) Inner Side Border to each side of the Center Block. Sew the Inner Top Border and Inner Bottom Border to the top and to the bottom of the Center Block.

14. Sew (1) 1 ¼” x 28 ½” Fabric E strip to each side of the Center Block. Sew (1) 1 ¼” x 30” Fabric E strip to the top and to the bottom of the Center Block.

15. Center (1) 3 ¼” x 39” Fabric F on (1) side of the Center Block and pin in place. Start sewing the strip a ¼” from the top edge of the block and stop a ¼” from the bottom edge. DO NOT TRIM THE EXCESS. Repeat with the opposite side.

Unit3

Unit3

Unit3

Unit3

Outer Top/Bottom Bordermake 2

G G G G G

12. Sew (5) 5 ½” Fabric G squares and (4) Unit 3 squares together, alternating them, to make the Outer Top Border (Fig. 16). Repeat to make the Outer Bottom Border.

18. Sew (1) Outer Side Border to each side of the Center Block. Sew the Outer Top Border and Outer Bottom Border to the top and to the bottom of the Center Block.

19. Sew (1) 1 ¼” x 45 ½” Fabric B strip to each side of the Center Block. Sew (1) 1 ¼” x 47” Fabric B strip to the top and to the bottom of the Center Block.

20. Center (1) 4 ½” x 59” Fabric F on (1) side of the Center Block and pin in place. Start sewing the strip a ¼” from the top edge of the block and stop a ¼” from the bottom edge. DO NOT TRIM THE EXCESS. Repeat with the opposite side.

21. Repeat Step 20 to sew (1) 4 ½” x 59” Fabric F strip to the top and to the bottom of the Center Block, making sure to stop and start ¼” away from each end of the block. To miter each corner, fold the Center Block on a diagonal, wrong side together. This should line up the strips from adjacent sides (Fig. 17).

22. Starting at the sewn seam (represented by the arrow in Figure 17), draw a 45-degree line to the edge of the fabric. Sew on the drawn line. Trim the excess fabric leaving a ¼” seam. Repeat this step with the remaining corners to make the quilt top.

16. Repeat Step 15 to sew (1) 3 ¼” x 39” Fabric F strip to the top and to the bottom of the Center Block, making sure to stop and start ¼” away from each end of the block. To miter each corner, fold the Center Block on a diagonal, wrong side together. This should line up the strips from adjacent sides (Fig. 17).

17. Starting at the sewn seam (represented by the arrow in Figure 17), draw a 45-degree line to the edge of the fabric. Sew on the drawn line. Trim the excess fabric leaving a ¼” seam. Repeat this step with the remaining corners.

© 2019 Studio e Fabrics®

Every effort has been made to ensure that all projects are error free. All the information is presented in good faith, however no warranty can be given nor results guaranteed as we have no control over the execution of instructions. Therefore, we assume no responsibility for the use of this information or damages that may occur as a result. When errors are brought to our attention, we make every effort to correct and post a revision as soon as possible. Please make sure to check www.studioefabrics.net for pattern updates prior to starting the project. We also recommend that you test the project prior to cutting for kits. Finally, all free projects are intended to remain free to you and are not for resale.

Page 7 of 7www.studioefabrics.net•STUDIO e PROJECTS•

Quilt Layout

Center Block

FB

BB

B

E

E E

E

F

FF F F

F

F

Layering, Quilting and Finishing23. Press the quilt top and 63” x 63” backing well. Layer backing (wrong side up), batting, pressed quilt top (right side up) and baste. Quilt as desired and trim excess batting and backing when quilting is complete.

Binding24. Cut the ends of the (6) Fabric B binding strips at a 45-degree angle and sew end to end to make (1) continuous piece of binding. Fold in half lengthwise and press wrong sides together.

25. Sew the binding to the front of the quilt, raw edges together. Turn the folded edge to the back, and hand stitch in place.