quickkatalog 2011 en - ganter norm · applications and uses, ganter also supplies products with...

StandardpartsQuick-Catalogue

Ganter is a long-time

member of DIN, Deutsches

Institut für Normung e. V.

Content

Ganter – The Company . . . . . . . . . . . . . . . . . . . . . . . � Page 1

Standard Parts for Clamping and Operating

1.1 Handles, Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . � Page 6

1.2 Cabinet „U“ handles, Tubular handles,

Gripping trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . � Page 7

1.3 Cranked handles . . . . . . . . . . . . . . . . . . . . . . . . . � Page 8

1.4 Handwheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . � Page 9

1.5 Adjustable hand levers, Ratchets . . . . . . . . . . . . . � Page 10

1.6 Clamping levers, Tension levers . . . . . . . . . . . . . . � Page 11

1.7 Star knobs, Wing screws, Knurled screws . . . . . . � Page 12

1.8 Indexing mechanisms, Control knobs,

Adjustable slide units . . . . . . . . . . . . . . . . . . . . . . � Page 13

1.9 Position indicators . . . . . . . . . . . . . . . . . . . . . . . . � Page 14

Machine and Fixture elements

2.1 Indexing plungers, Locking pins, Spring plungers � Page 15

2.2 Screws and Nuts, Washers, Lifting accessories . . � Page 16

2.3 Eccentrical cams, Clamping bolts, Clamping units � Page 17

2.4 Toggle clamps, Power clamps, Hook clamps . . . . � Page 18

2.5 Levelling feet, Locks, Hinges . . . . . . . . . . . . . . . . . � Page 19

2.6 Oil level sight glasses, Level indicators, Plugs . . . � 0

2.7 Universal joints, Ball joints, Fork joints . . . . . . . . . � Page 21

2.8 Tube clamp connectors, Linear actuators . . . . . . . � Page 22

2.9 Retaining magnets . . . . . . . . . . . . . . . . . . . . . . . . � Page 23

The leading partner for standard machine elements

Standard machine elements – for over 100 years

Established in 1894 as a mechanical workshop, Ganter presented the first

catalogue for standard elements as early as 1912 – five years before the

foundation of the Deutsche Industrie Norm (DIN). The idea of standardising

industrial products, manufacturing these in economical lot sizes, storing and

selling them individually was entirely new at that time. Right to this day, this

principle has been underlying our actions which, thanks to high availability

and the latest in production engineering, guarantee ultimate benefits for the

customer.

Leading worldwide

Ganter is at the leading edge in the development, production and marketing

of standard elements for the entire industry. Quality and the volume of the

production selection set standards across all industries. Ganter’s standard

machine elements are on offer worldwide through an efficient sales network.

Quality, advice and availability are so guaranteed – wherever you are.

Service inclusive

Ganter’s unique range of standard machine elements has the matching

product for virtually every possible application – if not, help is at hand with

customised solutions. One thing is certain, though: standard machine

elements by Ganter come from a single source and give the best possible

support to the design and procurement process.

Powerful partners

Ganter’s product range has always been strictly driven by needs and

requirements of the market. Supplementing this range with strategic

alliances and partnerships with other manufacturers has always been part

of this philosophy. Elesa Standards, unique plastic elements in design and

workmanship, have been part of the Ganter product range for almost 40

years. Today, standard machine elements made by Ganter and Elesa are

available in many markets worldwide under the common brand name

Elesa+Ganter.

Elesa S.p.A., Monza

All data and new products immediately at hand: Ganter allows the direct

access to all important items of information – from any computer and

from any place. The Ganter website supports users in selecting the

matching elements, regularly delivers updated information and

- naturally - allows orders to be placed online.

Standard elements in real time

www.ganter-griff.com

Page 2

Always up to date

New standard elements and additions to the range at a glance.

Dialogue-based

The dialogue-based selection function takes you to the matching

product quickly and reliably.

All details available

Dimensions, material details and other specifi cations are shown –

1 to 1, as in the print catalogue.

Input for CAD

Download directly to your own computer: the entire range of

standard elements is available in all common 2D and 3D formats.

Ordering online

Order your product easily and conveniently from Ganter’s Webshop.

Select your articles in a few easy steps and manage these articles

in an individual list of favourites. Past orders are remembered and

easily retrieved and can again be put into the shopping basket.

Also on DVD

All data are also available offl ine with the Ganter DVD – including

all data sheets in PDF format and all CAD data.

Page 3

De

r Inh

alt d

iese

r DV

D is

t urh

eb

erre

chtlich geschützt! Kopieren verboten!

DVD Katalog2D- und 3D-Zeichnungen

Ausgabe 01.2011

Auflage 15.0.1

Gültig für Deutschland

DVD Catalogue2D- and 3D DrawingsEdition 01.2011Change 15.0.1Valid for Germany

15.0

s

1d

www.ganter-griff.com

15.0Standardparts

DV

D-C

ata

log

ue

1 2 3 4 5

30

48

Standard elements for special requirements

Within the huge range of standard elements for a wide range of different

applications and uses, Ganter also supplies products with highly

specific properties and characteristics. These are classed in product

families and marked with appropriate icons, allowing standard elements

to be selected specifically in terms of certain requirements.

The stainless steel product family

Standard elements made of rust-proof stainless steel grades – designed for

use in the food industry, in the chemical industry or, in general, for use in

aggressive atmospheres or outdoors.

Normally made without galvanic surface treatment, standard elements of

the stainless steel product family are not only corrosion-resistant, but also

accurately fitting and environmentally friendly.

The Ergostyle product family

Perfect in ergonomics and design: The Ergostyle product family matches the

demands made in terms of aesthetics and ease of operation in modern wor-

king environments. The functional design supports the visual differentiation

of the final products in the markets and underlines their high quality claim.

Ergostyle standard elements have been awarded a number of design prizes;

their common mark are three small dots.

The Softline product family

Standard elements fitted with durable elastomer jackets. Their soft, slip-

proof surfaces enhance the force transfer between the operator’s hand and

the operating element – an unbeatable advantage in a moist, oily, greasy,

hot or cold environment.

Standard elements of the Softline product family also satisfy ultimate

ergonomic demands in every respect.

The Cleanline product family

This range of standard elements, designed specifically for stringent demands

in terms of hygiene, are the first choice in medical engineering. Smooth,

white surfaces allow trouble-free and thorough cleaning – and underline the

first impression of high standards of hygiene. If used, metal inserts are made

of rust-proof stainless steel.

Page 4

From an idea to the solutionGanter also develops ultimate technical and economical solutions for specific custom requirements.More information on page 24.

The Sanline product family

Special additives in the plastic material or in the appropriate coating prevent

unwanted organisms such as microbes or bacteria settling and growing on

these standard elements.

These properties are normally based on admitted silver ions which are

absolutely harmless to the user and which keep their effectiveness even after

a number of cleaning cycles.

The ATEX product family

Standard elements developed specially for hydraulics or gear construction,

suitable for use in explosion hazard atmospheres. Each standard element of

this product family features the appropriate documentation which gives details

and information on the underlying European Explosive Atmosphere Directive

(ATEX).

The ESD product family

plastic standard elements, electrically conductive owing to special materials

and so counteracting static charges. Designed for use in assembly areas where

components sensitive to static electric charges are handled. The letters ESD-C

on each element indicate the special antistatic properties under EN 100015/1

and ICE 61340-5-1

Page 5

Stainless Steel Ergostyle Softline Cleanline Sanline ATEX ESD

Customised solutions:

GN 563.1T-Handlesplastic

GN 563.2T-Handlesaluminium

GN 719.2Domed gear knobsplastic

GN 77Mushroom shaped handlesplastic

DIN 319Ball knobssteel, aluminium

GN 596Revolving ball knobsplastic

GN 203Fixed conical handlesplastic

DIN 98Revolving handlessteel,aluminium,plastic

GN 319.2Revolving ball knobsplastic

GN 798Revolving handlesplastic, aluminium

Tapered knobs GN 518in special colours with positioning symbol

Operating handles aluminiumwith laser-engraving and special „soft-coating“

Softline-Ball handles GN 675.1with tool-extension (hexagon key)

1.1 Handles, Knobs

GN 598.1Revolving handlesplastic /spindle stainless steel

GN 599.5Revolving cylindrical handlesplastic / spindle stainless steel

DIN 319Ball knobsstainless steel

GN 719.2Domed gear knobsplastic

GN 675Ball handleswithout cover cap,plastic

GN 675Ball handlesplastic

GN 676.5 Knobsstainless steel

GN 676Knurled knob screwsplastic

GN 310Gear lever handlesplastic /steel,stainless steel

GN 597.1Revolving mushroomshaped handles plastic / steel

More products in the internet:


GN 430Ledge handlesaluminium /plastic

GN 425.4Folding handle with recessed traysteel /zinc die casting

GN 425.2Folding handlessteel

GN 425Cabinet „U“ handlessteel

GN 333.1Tubular handlesaluminium /zinc die casting

GN 666Tubular handlesaluminium /plastic

GN 481Edge handlesaluminium /zinc die casting

GN 559Handlesaluminium

GN 728Cabinet „U“ handlesaluminium

GN 625Cabinet „U“ handlesplastic

GN 565.2Angular cabinet „U“ handlesaluminium

GN 565Cabinet„U“ handlesaluminium

Tubular handlealuminiummultiple bended, plastic coated

Cabinet „U“ handlesasymmetric shaped, of elliptic aluminium profi le

Handles GN 559with spring-loaded push-button

1.2 Cabinet „U“ handles, Tubular handles, Gripping trays

GN 565.5Cabinet „U“ handlesstainless steel

GN 767Cabinet „U“ handlesaluminium /plastic

GN 425Cabinet „U“ handlesstainless steel

GN 628Cabinet „U“ handlesplastic

GN 424.5Arch handlesstainless steel

GN 630Ledge handlesplastic

GN 733Gripping traysscrew-in type plastic

GN 333.5Tubular handlesstainless steel




GN 570.2Cranked handlesplastic

GN 570.3Cranked handles with retractable handleplastic

GN 558Indexing cranked hadlescast iron

GN 10Tri-ball handlessteel

GN 112.1Control handleszinc die casting

GN 510Cranked handlesplastic

GN 369Cranked handlessteel

DIN 469Cranked handlescast iron

DIN 468Cranked handlescast iron

GN 472.3Cranked handles with retractable handlealuminium

GN 471.3Cranked handles with retractable handlealuminium

GN 471.1Cranked handleszinc die casting

GN 471Cranked handlesaluminium

GN 570.1Cranked handlesplastic


Cranked handlesteelwelded, plastic coated with springloaded push-off bolt

Cranked handle stainless steel-components, butt-welded with plastic handle

Cranked handle GN 369satinless steelwith special drive fl ange

1.3 Cranked handles




GN 924Spokedhandwheelsaluminium

GN 923Dischandwheelsaluminium

GN 321.6Safetyhandwheelsaluminium

GN 000.5Coupling attachments for safety handwheels

GN 322.4GN 322.5Safetyhandwheelsaluminium

GN 322.3Handwheelswith retractable handlealuminium

GN 524.3 Handwheelswith retractable handleplastic



GN 520.3 Handwheelswith retractable handle plastic

GN 736Controlhandwheels aluminium

GN 735 Controlhandwheelsplastic

GN 521Dischandwheelsplastic

GN 522 Spokedhandwheelsplastic

GN 322Spokedhandwheelsaluminium

GN 321Dischandwheelsaluminium

DIN 3670Disc handwheelsaluminium

DIN 950Handwheelsaluminium, cast iron

One-spoked handwheel technopolymerwith customised design elements

Handwheel DIN 950all-over plastic coated in special colour

Safety-disc handwheelwith customised ball-bearing Coupling attachment,

1.4 Handwheels

GN 227.2Hand-wheelsstainless steel,pressed

GN 949Hand-wheelsstainless steel




GN 603.4Adjustablehand levers with releasing buttonplastic,chrome plated

GN 302Adjustablehand levers straight lever,zinc die casting

GN 316Ratchet clampsssteel

GN 6337.3Adjustable clamping leverssteel

GN 99.2Adjustable clamping leverssteel

GN 125Flat adjustable tension leverssteel

GN 312Safetytension leverssteel

GN 212.3Adjustable tension leverssteel

GN 500 Adjustable hand leversplastic

GN 101Adjustable hand levers zinc die casting

GN 300.4Adjustable hand levers with increased clamping force

GN 300Adjustable hand levers zinc die casting

Adjustable tension levercustomised specifi cations with aluminium-knob

Adjustable hand leverwith individual designed zinc die casting body

1.5 Adjustable hand levers, Ratchets

Hand lever GN 300with special stainless steel insert

GN 300.1Adjustable hand levers stainless steel-insert

GN 602Adjustable hand leverszinc die casting

GN 602.1Adjustable hand levers zinc die casting /stainless steelinsert

GN 604 Adjustablehand leversplastic

GN 604.1 Adjustable hand leversplastic /stainless steel

GN 603 Adjustablehand leverswith releasing buttonplastic

GN 212.5Adjustable tension leversstainless steel

GN 300.5Adjustable hand levers stainless steel



GN 213Turret leverssteel

GN 211Control leverssteel


GN 150Split hubsSintered steel


GN 512 Gear leversplastic

DIN 6304Tommy screwssteel

DIN 6307Tommy nutssteel

DIN 6305Tommy nutssteel

DIN 6337Ball leverssteel

GN 204Shortclamping leverssteel

DIN 99Clamping leverssteel

1.6 Clamping lever, Tension levers

Tension lever with special hubplastic coated, with polished aluminium knob

Tommy screwwith butt welded clamping bolt

Split hubwith stainless steel-shaft and plastic knob

DIN 99Clamping leversstainless steel

GN 99.5GN 99.6 Clamp nutssteel, stainless steel

GN 99.7GN 99.8Clamp nutssteel, stainless steel

GN 212Tension leverssteel, stainless steel

GN 623 Gear leversplastic

GN 601 Clamping leversplastic

GN 206Clamp nutsmalleable cast iron,stainless steel

GN 206.1 Clamp nuts with double levermalleable cast iron,stainless steel




GN 5337.3Safety-star knobsplastic /steel, stainless steel

GN 7336Knurled knobs with threaded studplastic /steel,stainless steel

GN 591 Knurled screwsplastic

GN 534 Knurled knobs with threaded studplastic

GN 5332Star knobswith extended bushplastic

GN 6336.1GN 6336.2Star knobsplastic /steel,stainless steel

DIN 6336Star knobscast iron, aluminium

Star knob GN 5334with special bolt, welded

Star knob GN 5335stainless steelwith through hole, without hub

1.7 Star knobs, Wing screws, Knurled screws

Star knob DIN 6336aluminiumplastic coated, with recess and special bolt

GN 636.4Star knobswith threaded studplastic

GN 5335Star knobsstainless steel

GN 5339.5 Triangular knobsstainless steel

GN 431Wing screwsstainless steel

GN 530.1Knurled nutsplastic / stainless steel

DIN 464 Knurled thumb screwsstainless steel

GN 6335.2Star knobsplastic / stainless steel

GN 834Wing nutsstainless steel

DIN 466 Knurled nutsstainless steel

GN 433Wing screwsstainless steel

GN 633Wing screwsplastic

GN 5334Star knobswith threaded boltstainless steel

GN 5330.5Tristar knobsplastic /stainless steel


GN 200Indexing mechanismssteel

GN 215Indexing leverssteel

GN 700Adjustable knob stepless positioningsteel / aluminium

GN 900.6Rotary tablesstainless steel /aluminium

GN 900Adjustable slide unitsaluminium

GN 200Indexing mechanisms with tension leversteel

GN 727Control knobs with adjustable spindlealuminium /steel

GN 729Control knobsaluminiumblack anodized

GN 5338 Setting knobsplastic

GN 723.3Reference fl anges for GN 723.4

GN 723.4Control knobsaluminium,anodized, natural colour

GN 726.2Control knobsaluminiumblack anodized

GN 526.1 Scale ringsfor GN 526

GN 626 Control knobsplastic

GN 268Collar bushes for GN 264steel

GN 264Scale ringssteel

GN 164Scale ringssteel


Control knobsteel zinc plated, with black anodized counter piece and special scales

Control knobaluminium profi le, black anodized with specifi c laser engraving

1.8 Indexing mechanisms, Control knobs, Adjustable slide units

GN 624 Softline-control knobsplastic

GN 200Indexing mechanismsstainless steel

GN 711Rulersplastic, stainless steel



GN 952.1 Adapter bushesfor positionindicatorsGN 953 / GN 954

GN 953.6GN 954.6Clamping platesfor positionindicatorsGN 953 / GN 954

GN 954.3 Control knobfor position indicators GN 954

GN 954.1 Spacer plate for positionindicators GN 954

GN 954Position indicators digital, 4 digits

GN 521.8Disc-handwheelsfor positionindicatorspendulum system

GN 953.1Spacer platefor position-indicators GN 953

GN 953Position indicators digital, 5 digits

GN 520.9Handwheels for positionindicatorsstationary system

GN 577.9Handwheels for positionindicatorsstationary system

GN 534.9 Control knobsfor position indicatorsstationary system

GN 000.9 Position indicatorsstationary systemanalog

GN 000.3Position indicators pendulum system digital / analog

GN 323.8Handwheelsfor positionindicatorspendulum system

GN 522.8Handwheelsfor positionindicatorspendulum system

GN 577.8 Handwheelsfor positionindicatorspendulum system

GN 526.8 Control knobs for positionindicatorspendulum system

GN 534.8Control knobs for positionindicatorspendulum system

GN 5348Control knobs with position indicators pendulum systemanalog

GN 000.8Position indicators pendulum systemanalog

1.9 Position indicators



GN 514Locking plungerswith PUSH-PUSH locking mechanism

GN 715Pagendruck-stücke zum Einpressen

GN 7336.8Clampingindexing plungersplastic, steel

GN 816Locking plungerssteel

GN 822Mini indexing plungerssteel /knob plastic

GN 722.3Spring latcheswith fl ange for surface mounting

GN 717Indexing plungerssteel

GN 817Indexing plungerssteel /knob plastic

GN 617Indexing plungerssteel /knob plastic

Pins with axial lock stainless steelcustomised dimensions and red anodized aluminium knob

Cam action indexing plungers GN 612yellow zinc plated with special thread

Special indexing plungersstainless steel with red plastic knob

2.1 Indexing plungers, locking pins, Spring plungers

GN 617Indexing plungersstainless steel

GN 617.1Indexing plungers with rest positionstainless steel /knob plastic

GN 612Cam action indexing plungersstainless steel

GN 614Spring plungersstainless steel /brass

GN 113.1Ball lock pinsstainless steel

GN 113.6Ball lock pinsstainless steel

GN 113.3Ball lock pinsstainless steel 1.4305

GN 615.3 Spring plungerswith internal hexagonsteel,stainless steel

GN 612.1Mounting blocksfor indexing plungers and cam action in-dexing plungers

GN 712Cam action indexing plungerssteel

GN 414Safety-indexing plungers

GN 713Side thrust pinsthreaded boby



GN 581Lifting eye boltsrotating

GN 187.4Serrated locking platesSintered steel /Sintered stainless steel

GN 507T-Nutsfor linking aluminium extrusions

DIN 787T-Slot bolts

GN 732Cylinder head shoulder bolts

GN 771.1Guide pins

GN 6333Quick-action hexagonal nuts

GN 346Ball joint thrust pads

GN 172GN 179Guide bushes

GN 586Load ringsrotating

GN 351Rubber buff ers

GN 913.3Grub screws with brass pad,plastic pad


Ball jointed levelling feet GN 638threaded boltbrass

Special eye screwbased on DIN 444

2.2 Screws and Nuts, Washers, Lifting accessories

DIN 444Eye screwssteel,stainless steel

GN 184.5Counter-sunk washersstainless steel

DIN 580Lifting eye boltssteel /stainless steel

DIN 6330Hexagonnutswith spherical seatingsteel,stainless steel

GN 350.1Levelling setssteel /stainless steel

GN 707.2Split set collarssteel, stainless steel

DIN 6885Keyssteel /stainless steel

GN 704Quick release set collarsaluminium


GN 418.1Cam point levers

GN 418Cam point screws

GN 927Clamping levers with eccentrical camLeverzinc die casting

GN 927Clamping levers with eccentrical camLever zinc die casting

GN 928Clamping units „trueround“

GN 411.2Centring bore clamps

GN 920.2Pull-down plates for wedge clamps GN 920.1

GN 920.1Wedge clamps

GN 917Double cam levers

GN 918.2Clamping bolts

GN 918.1Clamping bolts

GN 918Eccentrical cams

GN 919Hubs with eccentrical cam


Clamping unit GN 928 „trueround“, combined with an adjustabletension lever GN 212.3

Clamping levers with eccentrical cam GN 927with extended threaded stud

2.3 Eccentrical cams, Clamping bolts, Clamping units

GN 918.5Eccentrical camsstainless steel

GN 918.6Clamping boltsstainless steel

GN 918.7Clamping boltsstainless steel

GN 917.1Double cam leversstainless steel



GN 866Power clamps

GN 864Power clamps

GN 863Pneumatically operated clamps



GN 852Latch clampsheavy duty type

GN 851.1Latch clamps

GN 910Vertical clampsheavy duty type

GN 851.2Latch clamps

GN 844Plunger clamps

GN 820Horizontal clamps

GN 810Vertical clamps


Vertical clamps GN 810with extended lever tubing steel, zinc plated

Latch clamps GN 852with safety catch against unauthorised opening

2.4 Toggle clamps, Power clamps, Hook clamps

GN 843.1Plungerclampssteel, stainless steel

GN 821Hookclamps steel,stainless steel



GN 852Latch clampsheavy duty type stainless steel

GN 851Latch clampsstainless steel

GN 708Clamping boltssteel,stainless steel

GN 903Clamping boltssteel,stainless steel


GN 237.2Hingesto be unhingedzinc die casting

GN 238Hingesadjustablezinc die casting

GN 239.1Hinge with safetyswitchplastic

GN 151.2 Hingeswith friction brakeplastic

GN 115.1Mini-Locks

GN 115Locks lockable

GN 117Door locks

GN 315Snap locks locking distance adjustable

GN 992Threaded tube insertsaluminium

GN 340Levelling feet

GN 342.1Levelling feet vibration absorbingsteel

GN 340.1Levelling feet with fi xing lug

GN 343.2Levelling feetsteel

Levelling feet stainless steelhygienic, customised specifi cations


Levelling feetø 100 steel, zinc plated combined with a removable grub screw DIN 6332

2.5 Levelling feet, Locks, Hinges

GN 343.7Levelling feetplastic / stainless steel

GN 344.5 Levelling feetplastic / stainless steel

GN 237Hingesstainless steel,aluminium,zinc die casting

GN 341.1Levelling feetfor use in hygiene environment stainless steel

GN 119Door lockszinc die casting,stainless steel

GN 440.5Levelling feetstainless steel

GN 248Levelling feetvibration absorbing




GN 651Oil levelindicatorslong versionplastic

GN 652Oil level indicatorswith MIN level and MAX tempe-rature electrical sensors

GN 441GN 442Threaded plugsaluminium

GN 664.1Filler strainers

GN 774Breather capsplastic

GN 764Breather capssteel

GN 548.1Plugsplastic

GN 738GN 738.1Magnetic plugsaluminium

GN 743.2GN 743.3Oil level sight glassesbrass /natural glass

GN 741GN 742Threaded plugswith and without DIN symbolsaluminium

GN 749Threaded plugssteel

GN 740Threaded plugswith DIN-drain symbolplastic

GN 650.3Oil levelindicatorswith electrical oil level monitoringplastic

GN 546Oil level sight glassesplastic

GN 743.7GN 743.8Oil level sight glasses with conical threadbrass /natural glass

GN 744Prismatic-oil level sight glassesaluminium /plastic

GN 743GN 743.1Oil level sight glassesaluminium / natural glass

Plugs GN 541.1plastic special colour with customised dipstick

Threaded plugsaluminium, based on GN 741

Level sight glass GN 542 plasticwithout contrast screen, in special colour

2.6 Oil level sight glasses, Level indicators, Plugs

GN 650GN 650.1Oil levelindicatorsplastic,steel-/stainless steel-screws

GN 743.4GN 743.5Oil level sight glassesstainless steel /natural glass

GN 743.6ATEX-level sight glassesaluminium /ESG-glass


GN 240.2Quick-fi t couplings

GN 240.1Quick-fi t couplings

GN 240Quick-fi t couplings

DIN 71802Angled ball joints

GN 751Fork joints fork headsDIN 71752

GN 782Ball joints

GN 648.2Ball joints with threaded stud

GN 648.1Ball joints with female thread

GN 808.1Gaitersfor Universal joints

GN 908Universal joints for ordinary applications

GN 808.3Universal jointshaftswith needle bearing

DIN 808Universal joints with needle bearing

GN 808.2Universal jointshaftswith friction bearing

DIN 808Universal joints with friction bearing

2.7 Universal joints, Ball joints, Fork joints,

Fork jointaluminium anodized with zinc plated tension screw

Special fork joint


DIN 808Universal joints with friction bearingstainless steel

GN 648.5Ball joints with female threadstainless steel

GN 751Fork jointsfork headsDIN 71752stainless steel

DIN 71802Angled ball jointsstainless steel

GN 648.6Ball joints with threaded studstainless steel

GN 752Joint piecessteel /stainless steel



GN 299Longitudinal scalesfor linear actuators

GN 295Installation kits for position indicators used on linear actuators

GN 923.18Handwheels for linear actuators Ø18

GN 288Swivel clamp connector jointsaluminium


GN 276Swivel clamp connectorsaluminium

GN 273Swivel clamp connectorsaluminium

GN 193T-Angleconnector clampsaluminium

GN 163Base plate connector clampsaluminium


GN 147Flangedconnector clampsaluminium

GN 146FlangedConnector clampsaluminium

GN 141Flanged two-wayconnector clampsaluminium

GN 132Two-wayconnector clampsaluminium

Linear actuator GN 291with tefl on coating in special colour

Special clamp mountingaluminium profi le, plastic coated


2.8 Tube clamp connectors, Clamp mountings, Linear actuators

GN 293Linear actuatorssteel,stainless steel

GN 990Construc-tion tubingssteel,aluminium,stainless steel

GN 911Clampingkitszinc die castingstainless steel

GN 132.1GN 132.2Linear actuator connectorsaluminium

GN 131Two-wayconnector clampsaluminium, stainless steel

GN 145.1Flanged linear actuator connectorsaluminium, stainless steel



GN 62U-Magnetswith bore

GN 60Button-typemagnetswith bore

GN 52.4Retaining magnets with stud

GN 52.3Retaining magnets with intenalthread

GN 52.2Retaining magnetswith internal thread

GN 54.1Retaining magnetssmooth fi nishbrass

GN 52.1Retaining magnetssmooth fi nish

GN 51.4Retaining magnets with rubber jacket, with bore

GN 51.3Retaining magnets with rubber jacket, threaded stud

GN 51.5Retaining magnets with rubber jacket, internal thread

GN 51.2Retaining magnets with rubber jacket, threaded bush

GN 58Pot mag nets with bore

GN 50.4Retaining magnetswith boresteel

GN 50.2Retaining magnets withthreaded bush

GN 50.3Retaining magnets withthreaded stud

GN 50.1Retaining magnets without Thread

Retaining magnet with slots in the housing for safe hold

Retaining magnet with special thread

Retaining magnets with concave magnetic surface for tubings

2.9 Retaining magnets

GN 50.25Retainingmagneteswiththread bushstainless steel

GN 50.45Retainingmagnets with borestainless steel


Customised solutions are part of Ganter’s core competence. In spite

of the enormous variety of standardised elements, there are often

highly specific requirements in terms of dimensions, materials or

functionality. Working closely with the customer, Ganter then develops

individual solutions.

New or adapted

Depending on requirement profile, customised elements are made by cost-

effectively adapting an existing Ganter standard element – or by means of an

entirely new design.

Also in small unit quantities

A unique variety of different production methods and an adaptable, customer

driven organisation allow standard elements to be adapted and customised

even in relatively small unit quantities.

All-round service

Ganter not only develops and manufactures customised standard elements.

If required, Ganter also manages their on-call inventories, guaranteeing

economical lot or batch sizes, favourable prices and a high level of supply

availability.

Beyond standards

www.ganter-griff .com

Otto Ganter GmbH & Co. KG

Normteilefabrik

Triberger Straße 3

78120 Furtwangen

Germany

Phone +49 7723 6507-0

Fax +49 7723 4659

E-Mail info@ganter-griff .com

Issu

e 0

3/2

011

- V

alid

fo

r G

erm

an

y

quickkatalog 2011 en - ganter norm · applications and uses, ganter also supplies products with...

Documents