R8 - SILENTBLOCKS - FRONT AND REAR AXLE FITTINGS Page 20

R8 G DESCRIPTION REFERENCE €uro HT

Upper front suspension arm silentblock ( New version with hard rubber) MP2001 8.19 € Upper suspension arm pin MP2026 30.84 € Lower front suspension arm silentblock ( New version with hard rubber) MP2002 8.19 € Lower suspension arm pin MP2027 17.95 € Rear left and right rod silentblock MP2005 17.81 € Rod Silentblock MP2006 17.97 € Fixture hexagon for rear rod (France version MP2034 7.40 € Gearbox rear bracket ( pair ) MP2008 16.86 € Complete kit of the 2 lateral supports of gearbox (very strong, on line installation, don't come uns MP2063 97.90 € Silent block for kit 2063 MP2067 11.80 € Gearbox left bracket MP2009 15.55 € Gearbox right bracket MP2010 15.55 € Engine bracket (Toughness of 70 shores) MP2011 14.99 € Wide strap, length : 39.5 cm width : 5 cm (1 part) MP2035 17.95 € Short wide strap, length : 33.5cm MP2037 17.95 € Short wide strap length : 39.5(dropped car) MP2036 39.81 € Barre anti - rapprochement arrière (entre les longerons au niveau des ferrures de pare chocs MP2057 142.66 € Rear stop silent bloc MP2042 8.20 € Complete kit to weld for transformation of a cross-piece postpones from 2 to 4 shock absorbers MP4912 351.29 € Eccentric of adjustment lower triangle (the pair)+ 2 sheet steel blockage MP2062 MP2045 39.40 € kit 8 screw suspension arm ( 4 screw Ø 8.5mm + 4 screw Ø8 mm ) MP2061 33.95 € sheet steel of blockage of the exentrique (the pair) MP2062 6.12 €

R8 group 2 Complete set for stiff Racing bracket MP4103 112.17 €

R8 - SILENTBLOCKS - FRONT AND REAR AXLE FITTINGS PARTS PICTURES

R8 - BALL BEARINGS & CONNECTING RODS Page 22

4CV 1063cc - DAUPHINE DESCRIPTION REFERENCE €uro HT

Right or left steering connecting rod MP2231 73.48 €

4CV 1063cc - DAUPHINE - FLORIDE Right or left steering connecting rod MP2232 73.48 €

R8 - R8 G steering connecting rods (6 parts) MP2218 98.40 € Upper suspension ball bearing MP2203 26.55 € Lower suspension ball bearing MP2204 24.34 € Rack silent block MP2205 10.98 €

R8 - FORWARD DRIVE UPGRADING, DANGEL KIT Page 22a

DESCRIPTION REFERENCE €uro HTrep ( 1 ) : Set of 2 Ball bearings MP2221 56.82 € rep ( 2 ) : Set of 2 Connecting rod arms MP2222 56.82 € rep ( 3 ) : Rack bellows MP2218 set like (1 part) MP2223 2.99 € rep ( 6 ) : Hard steering flector MP2226 11.13 € rep ( 7 ) : Pair of adujstable rack brackets MP2227 72.00 € rep ( 8 ) : Rack booster (fitted on the crossmember) MP2228 58.61 € Sparebronze ring for Dangel kit MP2229/bague 20.61 €

KIT DANGEL FOR R8 G

DESCRIPTION REFERENCE €uro HT KIT DANGEL A110 OU R8G MP2229 329.38 €

It's a rigging fixture for the front wheel camber. The kit contains adaptators, metallicbearings and upgraded pins and makes a fine and identical fixture possible for eachwheel down to 2,5 ° negative.

By increasing the stiffness of the front axle, the kit provides an unrivalled driving precision

R8 - SUSPENSION ARMS Page 23

R8 G DESCRIPTION REFERENCE €uro HT

rep ( 2 ) : Left lower triangular arm MP2301 0.00 € rep ( 2 ) : Right lower triangular arm MP2302 0.00 € rep ( 1 ) : Left upper triangular arm MP2303 plus disponible € rep ( 1 ) : Right uper triangular arm MP2304 plus disponible €

R8 - SUSPENSION SPRINGS Page 24

R8 G DESCRIPTION REFERENCE €uro HT

Front spring ht 225mm / Ø turn 14 mm / nb turns 7.5 (black painting) MP2403 78.46 € Front spring ht 240mm / Ø turn 14 mm / nb turns 7,5 MP2402 78.95 € Front spring ht 215mm / Ø turn 14mm / nb turns 7,5 (RALLYES ) (black painting) MP2400 78.46 € Front spring ht 200 mm / Ø turn 14 mm / nb turns 7.5 ( CIRCUIT ) MP2401 78.46 €

group 2 body height dropping Rear spring ht 240mm / Ø turn 13, 5 mm / nb turns 7.75 MP2404 78.95 €

original body height dropping Rear spring ht 270mm / Ø turn 13 mm / nb turns 8 MP2414 78.95 € RUBBER STOP FOR REAR SPRING A 110/R8/R10 MP2439 5.65 €

STABILIZER BAR

R8 GORDINI DESCRIPTION REFERENCE €uro HT

rep ( 1 ) : inox bracket MP2405 42.16 € rep ( 2 ) : Silentblock MP2406 3.87 € Silentblock (Cevennes type) MP2407 5.68 € rep ( 7 ) : Fixing of the silent block MP2424 10.40 € rep ( 6 ) : Stabilizer bar R8 GORDINI MP2418 124.20 € Complete kit to weld for transformation of a cross-piece postpones from 2 to 4 shock absorbers MP4912 351.29 €

R8 - ABSORBERS Page 25

MECA PARTS ABSORBERS

Models : Road/sport or Rally competition or Racing circuitPerfect for those who want a multipurpose absorber with a sportsetting to be used as well

during the concentrations. Our racing absorbers are used by pilots in VHC on A110 and MATRA with a rally or circuit setting and also by lots of Group F with great success.

These absorbers can be delivered on request without extra charge.

R8 G DESCRIPTION REFERENCE €uro HT

Front shock absorber Ø 50mm double action Road and Rallye / racing specific settings MP2601 83.80 € Rear shock absorber double action Road and rallye / racing specific settings ( tub Ø50mm ) MP2602 83.80 €

R8 Small front crossmember DESCRIPTION REFERENCE €uro HT

Front shock absorber Ø 40mm double action Road and Rallye / racing specific settings MP2636 89.45 € Rear shock absorber double action Road and rallye / racing specific settings ( tub Ø50mm ) MP2602 83.80 €

DAUPHINE GORDINI 1093 DESCRIPTION REFERENCE €uro HT

Front absorber MP2606 83.80 € Rear shock absorber double action Road and rallye / racing specific settings ( tub Ø40 mm ) MP2607 83.80 €

AMORTISSEURS BILSTEIN R8 G

DESCRIPTION REFERENCE €uro HT Front gaz shock absorber Rallye and race MP2521 154.95 € Rear gaz shock absorber Rallye and race MP2522 153.00 €

R8 - ABSORBERS Page 26

ABSORBERS KONI

R8 G DESCRIPTION REFERENCE €uro HT

Front absorber MP2619 101.00 € Rear absorber MP2620 110.00 €

Fastening screws

DESCRIPTION REFERENCE €uro HT Spécial lower fastening screws for front and rear absorbers (set of 6) MP2650 42.16 €