remco supplies mountain brand! call for best pricing!!! (877) 897-9776

Quality, Selection and Valuervsd 8 2013

2013 product

catalog

contents

Quality, Selection and Value2

Pages 2 - 9 ................Air Tools

Pages 10 - 11 ............Corded & Cordless

Pages 12 - 15 ............Hand Tools

Pages 16 - 19 ............Tool Storage

Pages 20-21 ..............Paint & Body

Pages 43 - 45 ............Cutting & Threading

Pages 22 - 26 ............Lifting Equipment

Pages 27 - 28 ............Vehicle Specialty

8.....................Lighting

Page 29.....................Electronics & Diagnostics

Pages 30 - 37 ............Shop Equipment

Pages 38 - 41 ............Air Conditioning

Pages 46 - 54 ............Displays

aIr toolS

Quality, Selection and Value 3

MTN72453/4" Drive Composite Impact Wrench• High power 3/4" drive composite impact wrench• Maximum Torque is 1150 ft./lbs. in forward and 1200 ft./lbs. in reverse

• Lightweight at only 7.65 lbs• Composite body• Long lasting twin hammer design, double blow clutch

Maximize user comfort with an extremely well balanced tool. Tool features through handle exhaust. High power with 3 forwardpositions and 1 reverse position. 5,500 RPM. • 1 year warranty on material and workmanship.



Maximize user comfort with an extremely wellbalanced tool. Tool features through handleexhaust. High power with 3 forward positions and1 reverse position. 7,500 RPM.• 1 year warranty on material and workmanship.



Maximize user comfort with an extremely well balanced tool.Tool features through handle exhaust. High power with 3forward positions and 1 reverse position. 12,000 RPM.• 1 year warranty on material and workmanship.

aIr toolS


MTN73723/8" Drive Pistol Grip Air Impact Wrench • Ring socket retainer for rapid socket changes• Front bumper for added protection• Built-in regulator for positive speed control• Aluminum body• 1 year warranty on material and workmanship.

Specifications:• Square drive: 3/8"• Free speed:10,000 RPM• Overall length: 6-3/4"• Net weight: 2-1/3 lbs.• Max. torque: 75 ft./lbs.• Air inlet thread size: 1/4 NPT• Air hose I.D. size: 3/8"• Average air consumption: 4 cfm• Noise level: 84 dBA @90 PSI

MTN72073/8" Drive Heavy Duty Air Ratchet• High performance motor delivers maximum torque forward and reverse• Self-lubricated rotor blades• 360 degrees adjustable exhaust directs air away from work surface• Short, robust crankshaft transfers power with low vibration• Internal ring gear with three planetary gears provides maximum service life• 1 year warranty on material and workmanship.

Specifications:• Square drive: 3/8”• Free speed: 160 rpm• Overall length: 10.3”• Net weight: 2-1/2 lbs.• Max. torque: 60ft./lbs• Air inlet thread: 1/4” NPT• Air hose I.D.size: 3/8”• Avg. air consumption: 4cfm.• Noise level: 93 dBA @ 90 PSI

MTN7226A1/4" Drive Stubby Air Ratchet• Compact and lightweight• Ideal tool for confined working areas, like under dashboard work• Special reinforced planetary gear provides maximum service life• Internal ring gear with three planetary gears• Self lubricated blade to prevent cylinder and end plates from wear• 1 year warranty on material and workmanship.

Specifications:• Square drive: 1/4”• Free speed: 240 RPM• Overall length: 6-1/2”• Net weight: 1-1/8 lbs.• Max. torque: 30ft./lbs• Air inlet thread: 1/4” NPT• Air hose I.D.size: 3/8"• Avg. air consumption: 3 cfm

• Noise level: 90 dBA @ 90 PSI

MTN104RKRepair kit for the MTN104R 1/4 inch Drive Ratchet

MTN105RKRepair kit for the MTN105R 3/8 inch Drive Ratchet

MTN7228A3/8" Drive Air Ratchet• Ball and needle bearing construction for longer tool life• Automatic release lever throttle• Lightweight construction for ease of use• Value priced ratchet• 1 year warranty on material and workmanship.

Specifications:• Square drive: 3/8"• Free speed: 160 RPM• Overall length: 10"• Net weight: 2-3/4 lbs.• Maximum torque: 50 ft./lbs.• Air inlet thread: 1/4" NPT• Air hose I.D. size: 3/8"• Avg. air consumption: 4 cfm• Noise level: 93 dBA @ 90 PSI

aIr toolS


MTN7329Dual Piston Straight In-Line Sander• Aluminum body• Performs on plastic fillers at any stage of hardening• Feathers with ease and smoothness• Dual piston provides efficient power and prevents stalling• Two handle design for comfortable operation• 1 year warranty on material and workmanship.

Specifications:• Free speed: 2,400 strokes per min• Pad size: 2-3/4" x 15"• Overall length: 16"• Net weight: 6-1/2Ibs.• Air inlet thread: 1/4" NPT• Air Hose I.D. Size: 3/8"• Avg. air consumption: 6cfm• Noise level: 87 dBA @ 90 PSI

MTN73023/8" Chuck Reversible Air Drill • Lightweight compact size is easy to handle• Provides full power in forward and reverse• Equipped with a built-in muffler for noise reduction• Planetary gear system for long life• Aluminum body with rubber handle grip

Specifications:• 3/8" capacity Jacobs chuck• Free speed: 1,800 rpm• Overall length: 7-7/8"• Net weight: 2-1/2 lbs.• Motor: 1/2 hp• Air inlet thread: 1/4" NPT• Air hose I.D. size: 3/8"• Avg. air consumption: 7cfm• Noise level: 86.8 dBA @ 90 PSI

MTN73071/2" Chuck Extra Heavy Duty Reversible Air Drill• Extra heavy duty drill for extra heavy duty work with side handle• One hand reverse lever for reversible action with positive action triggerfor speed control

• Variable speed throttle for ease of starting drill hole• Built-in muffler reduces noise level• Planetary gear system for long life

Specifications:• 1/4" capacity Jacobs chuck• Free speed; 500 RPM• Overall length: 9-1/4"• Net weight: 4-1/3 lbs.• Motor size: 1/2 HP• Air inlet thread size: 1/4" NPT• Air hose I.D. size: 3/8"• Avg. air consumption: 7 cfm• Noise level: 88.3 dBA @ 90 PSI

air tools


MTN73386" Palm Finishing Sander - 3/16" Stroke• Super lightweight and compact for minimum operator fatigue• Orbital action assures final swirl-free finish• Free speed: 10,000 RPM• Sander has built-in speed regulator and its ergonomic design is suited forlong term operation and greater comfort and control

• Sander has compact and lightweight motor for long term operation,composite lever housing and rotors, special design reduces sound level andhas low vibration

• 1 year warranty on material and workmanship.

Specifications:• Sander stroke: 3/16"• Pad size: 6"• Spindle thread size: 5/16" - 24• Free speed: 10,000 RPM• Air inlet thread size: 1/4" NPT• Air hose I.D. size: 3/8"• Net weight: 1-1/2 lbs.• Overall length: 6"• Average air consumption: 5-1/2 cfm• Nois level: 84 dBA @ 90 PSI

MTN73216" DAQ Random Orbital Sander• DAQ-dual action, quiet performance• Used for feather edging, metal preparation and finish work on body filler• Built-in silencer and motor insulation provide quiet operation• Eliminates time consuming hand sanding• Balanced ball bearing construction for vibration-free• Built-in regulator for positive speed control• 1 year warranty on material and workmanship.

Specifications:• Disc size: 6"• Spindle thread size: 5/16" x 24• Free speed: 9,000 RPM• Air hose I.D. size: 3/8"• Avg. air consumption: 5 cfm• Net weight: 4-1/4 lbs.• Overall length: 9-1/2"• Air inlet thread: 1/4" NPT• Noise level: 85.1dBA @ 90 PSI

MTN73205" Pistol Grip High Speed Air Sander• Aluminum body• Ideal for touch up sanding• Lightweight pistol grip design offers greater control and comfort• Built-in regulator for positive speed control• Direct drive motor with handle exhaust• 1 year warranty on material and workmanship.

Specifications:• Pad size: 5"• Spindle thread size: 7/16" - 20• Free speed: 18,000 RPM• Air inlet thread size: 1/4" NPT• Air hose I.D. size: 3/8"• Net weight: 2-1/2 lb.• Overall length: 5-3/4"• Avg. air cosumption: 4 cfm• Noise level: 95 dBA @ 90 PSI

air tools


MTN7330250mm Long Barrel Air Hammer with 9 Piece Chisel Set• Ideal extra duty hammer kit for various automotive and industrial applications

• Standard .401 shank size• Long barrel allows better reach• Kit includes: air hammer, 9 chisels, quick changeretainer and bee hive retainer packed in a blow molded case


Specifications:• 3-5/8" Piston stroke• 2,100 blows per minute• Length: 10"• Weight: 4-1/2 lbs.• Air inlet thread: 1/4" NPT• Air hose I.D. size: 3/8"• Average air consumption: 4 cfm• Noise level: 99.2 dBA @ 90 PSI

MTN7330-44 Piece Chisel Set for MTN7330 and other Air Hammers• 5 piece set includes the most popular short chisels• Set includes - flat chisel and spot weld breaker• Set includes - tapered punch and rivet cutter• Replacement set for the short chisels in the MTN7330 Air Hammer• Made in Taiwan

MTN7330-55 Piece Chisel Set for MTN7330 and other Air Hammers• 5 piece set includes the most popular 7" chisels• Set includes - flat chisel, spot weld breaker and tapered punch• Set also includes - claw ripper and rivet cutter• Replacement set for the long chisels in the MTN7330 Air Hammer• Made in Taiwan

MTN7332Heavy Duty Air Sabre Saw• Ideal for body shop, muffler and exhaust work• Adjustable blade guide increases blade life• Cuts all types of aluminum, plastic, fiberglass and sheet metal• Cuts intricate shapes and tight radius curves on flat and curved surfaces

Specifications:• 1/4" Piston stroke • 10,000 strokes per minute• Length: 8 1/2" • Weight: 2 lbs.• Motor: 1/2 HP • Air inlet thread: 1/4" NPT• Air hose I.D. size: 3/8" • Avg. air consumption: 7 cfm• Noise level: 88 dBA @ 90 PSI

MTN73263" Cut Off Tool • Contoured lever throttle with positive self-locking action prevents accidental starting ofmotor

• Chrome plated steel spark guard• Built-in speed regulator• Heavy duty motor for tough cutting jobs

Specifications:• Wheel size: 3"• Free speed: 22,000 RPM• Air inlet thread: 1/4" NPT• Air hose I.D. size: 3/8"• Net weight: 1-1/2 lbs.• Overall length: 7-1/2"• Avg. air consumption: 4 cfm• Noise level: 89 dBA @ 90 PSI

aIr toolS


MTN73171/4" Mini Die Grinder with Safety Lever• Compact and lightweight composite body• Lever throttle for feathering control• Built in speed regulator• Rib textured handle provides a firm grip• Front exhaust

Specifications:• Collet size: 1/4"• Free speed: 25,000 rpm• Air inlet thread: 1/4" NPT• Air hose I.D. size: 3/8"• Net weight: 7/8 lbs.• Overall length: 4-3/4"• Avg. air consumption: 3 cfm• Noise level: 88 dBA @ 90 PSI

MTN73532" Mini Angle Grinder• Grinder has rubber sleeve handle to reduce vibration; rib textured handleprovides a firm grip and features a safety throttle lever

• Side exhaust offers the best motor efficiency and no lubricants needed• Heavy duty alloy air motor• Guard and 2 grinding wheels (60 and 80 grit) included• Compact and lightweight

Mountain 2 inch Mini Angle Grinder features the best of the heavy dutygrinder models in a small compact package.

MTN73181/4" Medium Die Grinder with Safety Lever• Compact and lightweight composite body• Lever throttle for feathering control• Built in speed regulator• Rib textured handle provides a firm grip• Safety lever• Rear exhaust air flow system directs air away from work surface

Specifications:• Collet size: 1/4"• Free speed: 22,000 rpm• Air inlet thread: 1/4" NPT• Air hose I.D. size: 3/8"• Net weight: 1-1/8 lbs.• Overall length: 6-3/4"• Avg. air consumption: 3 cfm• Noise level: 92.3 dBA @ 90 PSI

MTN731190 Degree 1/4" Angle Head Die Grinder• Lever throttle for feathering control• Compact and lightweight composite body• Safety lever• Built in speed regulator• Front exhaust• Rib textured handle provides firm grip

Specifications:• Collet size: 1/4"• Motor H.P.: 1/4• Free speed: 20,000 RPM• Air inlet thread: 1/4" NPT• Air hose I.D. size: 3/8"• Net weight: 1 lbs.• Overall length: 5-3/4"• Avg. air consumption: 3 cfm• Noise level: 89 dBA @ 90 PSI

aIr toolS


MTN84802 in. Coarse Twist and Lock Style Surface Prep Disc• Box of 25• Made in the U.S.A.

MTN84812 in. Medium Surface Disc• 25/box

MTN94853" Coarse Roloc Disc• 25/box

MTN94862" Medium Roloc Disc • 25/box

MTN85392” Surface Prep Holder With 1/4” Shank

MTN85403" Surface Prep Holder with 1/4" Shank

Air Hydraulic Riveters• Comes with following nosepieces: 3/16”, 5/32”, 1/8”, 3/32”

• Powerful durable, high speed production tool• Quick release air valve permits cylinder to return quickly for high speedassembly operations: prevents overloading for long life

• Performs well at any angle• Gets into hard-to-reach areas• Provides quick, quiet and comfortable operation preventing user fatigue• 1 year warranty on material and workmanship.

Specifications:• Air hose I.D. size: 3/8"• Avg. air consumption: 2 cfm• Air inlet thread: 1/4" NPT

MTN7333 - 3/16" RiveterSpecifications:• Maximum 3/16" rivet capacity• Length: 10-5/8"• Weight: 3-1/3 lb.

MTN7334 - 1/4" RiveterSpecifications:• Maximum 1/4" rivet capacity• Length: 11-5/8"• Weight: 4-1/4 lb.

MTN731090° Angle 1/4" Die Grinder and Surface Prep Kit• Composite body• Free speed: 20,000 RPM• Collet size: 1/4"• Comes in a blow molded case

Kit Includes: 1-1/4" 90° angle die grinder with safety lever, 5-2" surface preppads, 5-3" surface prep pads, 1- 2" Roll Lock holder, 1- 3" Roll Lock holder,1- small spanner wrench, 1- large spanner wrench, 1- air fitting, 1- 1/8"Collet and 10 piece stone assortment

Specifications:• Collet size: 1/4" • Free speed: 20,000 RPM• Overall length: 5-3/4" • Net weight: 1-1/8 lbs. (tool only)• Motor: 1/3 HP • Air inlet thread: 1/4" NPT• Air hose I.D. size: 3/8" • Avg. air consumption: 3cfm• Noise level: 88 dBA @90 PSI

229pIece Set

corded and cordless


MTNEDG-G229 Piece Rotary Tool Set• Heavy duty rotary tool (120 Watt/ 60Hz)• Variable speed range: 8,000 rpm-30,000 rpm• Versatile tool with applications in automotive; PBE, Craft, Marine and Industrial

• Blow molded case for ease of storage• Wide assortment of accessories for multiple grinding,cutting and polishing operations

The 229 piece Mountain Rotary Tool kit is perfect fortechnicians or shop owners, as well as home use. The kitincludes the rotary tool plus mini- sandpaper, drill bits,mini-grinding points, mini-brushes and mini-polishingpads stored in a convenient easy opening storage case.

MTN7136A7" Variable Speed Polisher• Rated Voltage: 120 Volt/ 60 Hz• Rated Power: 11 Amps• Variable Speed: 0-3,000 RPM• Spindles size: 5/8" x 11"• Ergonomic grip• ETL listed• Diameter of disc: 7”1 year warranty on material and workmanship.

MTN7115A4 - 1/2” Angle Grinder• 120V, 60Hz, 7.2 Amps• 3-position side handle and adjustable safety guard• Spindle lock for quick and easy blade changes• Lock button for convenience• Spindle size: 5/8" x 11"• ETL approved.• 1 year warranty on material and workmanship.

corded and cordless


Keyless Drill Chucks (Jacobs)• 3/8” - 24• The Jacobs® keyless chuck higher gripping torque than standard key chucks and there is never a keyto misplace

• They feature a non-rusting, high performance bodywith a unique sure-grip sleeve formaximum user comfort and handtightening efficiencyMTN74112 - 1/2”

MTN74138 - 3/8”

MTN7300Quick Change Retainer Coupler• For .401 shank air tools• Guards against accidental shank release• Interlocking design grips tight yet allows for quick snap changes

MTN7301Quick Change Chisel Retainer Spring• Grips tight but still allows quick snap changes• Retains chisels with .401 shanks

MTN7304Bee Hive Retaining Spring• Guards against accidental release of shank• For use with .401 shank tools

MTN127951Regular Assembly for CPT734

MTN48418Pins Hammer For CPT772

5 positionadjustable rear handlefor flexibility with a click of a button

MTNERS1325-Position Reciprocating Saw• 5- position adjustable rear handle for ease of use and flexibility with a click of a button• Ergonomic D-handle• Tooless blade change system• 120 Volt/ 60Hz, 6.0 Amps• Convenient trigger control• 1 year warranty on material and workmanship.

The kit comes complete with 2 blades (1- wood blade and 1- metal blade) along with replacement brushes.

hand tools


MTN101212 Piece 1/4" Drive Multi Plus Close Quarter Socket Set• Can be used with standard 1/4" dr. ratchet or with ratchet included in set• All sockets can also be used with an 11mm wrench• Fits SAE, Metric, 6 point, 12 point, E-Torx and Square Drive Sockets• Allows you to work in tight work areas where standard ratchets can't

This complete Multi Plus Close Quarter Socket Set includes 5mm, 5.5mm,6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, and 14mm socketsand a 72 Tooth 6" Reversible Straight Ratchet.

1/4" Drive Chrome Close Quarter SocketsMTN1012-5 - 5mm MTN1012-5.5 - 5.5mm

MTN1012-6 - 6mm MTN1012-7 - 7mm

MTN1012-8 - 8mm MTN1012-9 - 9mm

MTN1012-10 - 10mm MTN1012-11 - 11mm

MTN1012-12 - 12mm MTN1012-13 -13mm

MTN1012-14 -14mm

MTN1012-R1/4" Drive Close Quarter Reversible Ratchet

MTN1060B40 Piece Color Coded Bit Set• Replacement bits for MTN1060• Color Coded• 40 Bits - Phillips, Slotted, Hex, Torx• Complete S2 Bit Set• Packaged in a plastic bagSizes include: Pozi Bits: 1, 2, 3, Phillips Bits: 1, 2, 3, Hex Bits:1.5, 2, 2.5, 3, 4, 5, 6, Hex Bits: 5/32, 3/16, 7/32, 1/4, SlottedBits: 5/32, 3/16, 1/4, Torx Bits: T7, T8, T9, T10, T15, T20, T25,T27, T30, T40, Tamperproof Torx Bits: T7, T8, T9, T10, T15,T20, T25, T30, T40

MTN1060R1/4" Drive Reversible Ratchet and Bit Driver• 1/4" Drive 72 Teeth• Quick Release• Packaged in a plastic bag

Both a Socket ratchet and BIt ratchet all In one

MTN106060 Piece 1/4" Drive Spline Socket Set• 72 tooth quick release double ended bit ratchet• 17 piece CRV Spline Socket - 9 Metric and 8 SAE• 40 color coded bits – Philips, Slotted, Hex, Torx• 1/4" drive 2" extension and quick release

Sizes include: SAE Sockets: 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16"and 1/2"; Metric Sockets: 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm,11mm and 12mm; Pozi Bits: 1, 2, 3; Phillips Bits: 1, 2, 3; Hex Bits: 1.5, 2,2.5, 3, 4, 5, 6; Hex Bits: 5/32", 3/16", 7/32", 1/4"; Slotted Bits: 5/32",3/16", 1/4"; Torx Bits: T7, T8, T9, T10, T15, T20, T25, T27, T30, T40;Tamperproof Torx Bits: T7, T8, T9, T10, T15, T20, T25, T30, T40 .

ShallowSocketSFor conFIned areaS

hand tools


MTN941010 Piece Flexible Ratcheting Wrench Set• Double dipped handles for comfort and grip• Ratcheting spline• Sturdy Chrome Vanadium

Double dipped long, slim handle provides maximum reachwithout compromising torque. Sizes include: 8mm, 10mm,12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 19mm.

MTN4505 Piece Tight Access DriveWrench Set• 5 piece set to get to fasteners located in tight locations

• Wrench sizes: 10mm, 12mm, 13mm,14mm, 15mm

• Can be used with an air wrench or ratchet to remove fasteners from tight areas

• Comes in a blow molded case• Includes adapter so tool can be used with any size 3/8" dr socket

MTNRM65 Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set• Extra long, flexible and reversible• Patented 90 tooth design• Packed in a tray• Limited lifetime warranty

Includes sizes: 8mm x 10mm, 12mm x 14mm, 13mm x 15mm,16mm x 18mm and 17mm x 19mm. This premium quality,patented 90 tooth design provides an extra long and flexiblereach for hard to get to fasteners with a built in reversemechanism. The 5 piece, chrome metric, universal spline setoffers a limited lifetime warranty.

MTNRF74 Piece SAE Double Box Universal Spline Ratcheting Wrench Set• Extra long, flexible and reversible• Patented 90 tooth design• Packed in a tray• Limited lifetime warranty

Sizes include: 5/16" x 3/8", 7/16" x 1/2", 9/16" x 5/8" and 11/16"x 3/4". This premium quality, patented 90 tooth design offers anextra long and flexible reach for hard to access fasteners with abuilt in reverse mechanism. The 4 piece, chrome fractional universalspline set offers a limited lifetime warranty.

MTN1481212” Pipe Wrench• Made of chrome vanadium steel• 1 year warranty on material & workmanship

MTNC48-1Ratcheting Crimper Frame

MTNC48-2Jaw A, Insulated Terminal 10-22 AWG

MTNC48-3Jaw B, Non-insulated Terminal 8-20 AWG

MTNC48-4Jaw C, Open Barrel 10-20 AWG

MTNC48-5Jaw H, Open Barrel/D-Sub Connector 8-14 AWG

MTNC48-H1Jaw H1, Spark Plug Connector

MTNC48Quick Change Ratcheting Crimper Kit• Patented design for changing jaw without a tool required

• Jaws installed any side for left hand or right hand user• Adjustable crimping pressure• Include 4 jaws for the most common automobile terminals• US PatentPatented quick change crimper including 4 jaws for the most common automobile terminals.Jaw A for insulated terminals AWG 22-18/16-14/12-10Jaw B for non-insulated terminals AWG 20-18/16-14/12-10/8Jaw C for open barrel terminals AWG 20-18/16-14/12-10Jaw H for open barrel & V3.5 D-sub terminals AWG 14/22/8

hand tools


MTN10513/8” 6 Point SAE and Metric Socket SetIncludes: 8" 72 Tooth Pro Tear Drop Handle Ratchet withQuick Release; 3" and 6" Extensions; 3/8"F x 1/4"M Adapter;Speeder Handle; Universal Joint; 9/16" Spark Plug Socket;1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4",13/16", 7/8" Standard Sockets; 3/8", 7/16", 1/2", 9/16", 5/8",11/16", 3/4", 13/16", 7/8" Deep Sockets; 6mm, 7mm, 8mm,9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm,17mm, 18mm, 19mm Standard Sockets; 10mm, 11mm, 12mm,13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm DeepSockets. Packaged in a blow mold plastic case.

MTN10471/4” 6 Point SAE and Metric Socket SetIncludes: 5.5" 72 Tooth Pro Tear Drop Handle Ratchet with QuickRelease; 3" and 6" Extensions; 1/4"F x 3/8"M Adapter; 6" ExtensionSpinner Handle; Universal Joint; 3/16", 7/32", 1/4", 9/32", 5/16", 11/32",3/8", 15/32", 7/16", 1/2", 9/16" Standard Sockets, 1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16" Deep Sockets; 4mm, 4.5mm, 5mm,5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mmStandard Sockets; 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm,14mm Deep Sockets. Packaged in a blow mold plastic case.

MTN1416611" Long Reach Heavy Duty 34” to 1-1/4” Slip Joint Hose Gripper Pliers• 3/4" - 1-1/4" Hose Gripper Pliers• Pliers allow for many applications includingremoving/replacing hoses, headlights, bulbs, etc.

• Made of brushed finished S55 Steel• Cushioned handles for added comfort and grip

6 Point SAE and Metric Socket Sets• All Mountain™ Sockets and Accessories are High Polished Chrome and made of the highest quality Chrome Vanadium Steel• Each piece is Laser Etched with High Visibility markings with the part number and size for easy identification• Features a Beauty Ring at the bottom for assistance in starting the application• MOUNTAIN™ Socket Sets have a Lifetime Warranty• Ratchet Head Kits will be available for warranty and repair on 1/4in. Drive Ratchets

MTN18022 Piece Magnetic Punch Screwdriver Set• Flat Tip and Phillips • Magnetic unit• Heavy duty cap for punch apparatus2 piece multi-functional magnetic screwdriver set that canact as a punch. Magnetic handle will allows the screwdriverto hang for easy storage. Heavy duty cap allows for use as apunch without compromising the screwdriver tip.

Torque Wrenches• Click style torque wrench with PRO Ratchet Head• Micrometer style clicks and/or releases when preset torque is reached• Hardened steel body with knurled handles• Metric and english settings • Packaged in a black blow molded case• Complies with ASME and Federal specifications

MTN16200 - 3/8” Drive

• Torque Capacity: 20-200 in/lbs

MTN16150 - 1/2" Drive

• Torque Capacity: 10-150 ft/lbs

MTN16250 - 1/2” Drive


MTN16600 - 3/4” Drive


hand tools


1/4in. Drive AccessoriesMTN1043EX ...........1/4in. Drive 3in. ExtensionMTN1046EX ...........1/4in. Drive 6in. ExtensionMTN104UJ..............1/4in. Drive Universal Joint SocketMTN1043/8MA.......1/4in. Drive 1/4in.Female-................................3/8in. Male AdapterMTN1046SP............1/4in. Drive 6in. Long Spinner Handle

1/4in. Drive 6 Point Sockets Fractional 6 Point SocketsMTN1043/16 ..........1/4in. Dr 3/16in. 6 Point Socket MTN1047/32 ..........1/4in. Dr 7/32in. 6 Point Socket MTN1041/4 ............1/4in. Dr 1/4in. 6 Point Socket MTN1049/32 ..........1/4in. Dr 9/32in. 6 Point Socket MTN1045/16 ..........1/4in. Dr 5/16in. 6 Point Socket MTN10411/32 ........1/4in. Dr 11/32in. 6 Point Socket MTN1043/8 ............1/4in. Dr 3/8in. 6 Point Socket MTN1047/16 ..........1/4in. Dr 7/16in. 6 Point Socket MTN1041/2 ............1/4in. Dr 1/2in. 6 Point Socket MTN1049/16 ..........1/4in. Dr 9/16in. 6 Point Socket

Fractional Deep 6 Point SocketsMTN1041/4D..........1/4in. Dr 1/4in. 6 Point Deep SocketMTN1049/32D........1/4in. Dr 9/32in. 6 Point Deep SocketMTN1045/16D........1/4in. Dr 5/16in. 6 Point Deep SocketMTN10411/32D......1/4in. Dr 11/32in. 6 Point Deep SocketMTN1043/8D..........1/4in. Dr 3/8in. 6 Point Deep SocketMTN1047/16D........1/4in. Dr 7/16in. 6 Point Deep SocketMTN10415/32D......1/4in. Dr 15/32in. 6 Point Deep SocketMTN1041/2D..........1/4in. Dr 1/2in. 6 Point Deep SocketMTN1049/16D........1/4in. Dr 9/16in. 6 Point Deep Socket

Metric 6 Point SocketsMTN1044M.............1/4in. Dr 4MM 6 Point Socket MTN1044.5M..........1/4in. Dr 4.5MM 6 Point Socket MTN1045M.............1/4in. Dr 5MM 6 Point Socket MTN1045.5M..........1/4in. Dr 5.5MM 6 Point Socket MTN1046M.............1/4in. Dr 6MM 6 Point Socket MTN1047M.............1/4in. Dr 7MM 6 Point Socket MTN1048M.............1/4in. Dr 8MM 6 Point Socket MTN1049M.............1/4in. Dr 9MM 6 Point Socket MTN10410M...........1/4in. Dr 10MM 6 Point Socket MTN10411M...........1/4in. Dr 11MM 6 Point Socket MTN10412M...........1/4in. Dr 12MM 6 Point Socket MTN10413M...........1/4in. Dr 13MM 6 Point Socket MTN10414M...........1/4in. Dr 14MM 6 Point Socket

Metric Deep 6 Point SocketsMTN1046MD..........1/4in. Dr 6MM 6 Point Deep SocketMTN1047MD..........1/4in. Dr 7MM 6 Point Deep SocketMTN1048MD..........1/4in. Dr 8MM 6 Point Deep SocketMTN1049MD..........1/4in. Dr 9MM 6 Point Deep SocketMTN10411MD........1/4in. Dr 11MM 6 Point Deep SocketMTN10412MD........1/4in. Dr 12MM 6 Point Deep SocketMTN10413MD........1/4in. Dr 13MM 6 Point Deep SocketMTN10414MD........1/4in. Dr 14MM 6 Point Deep Socket

3/8in. Drive AccessoriesMTN1053EX ...........3/8in. Drive 3in. ExtensionMTN1056EX ...........3/8in. Drive 6in. ExtensionMTN1051/4MA.......3/8in. Drive 3/8in. Female................................-1/4in. Male ReducerMTN105SPH ...........3/8in. Drive 16in. Long Speeder Handle

3/8in. Drive 6 Point Sockets Fractional 6 Point SocketsMTN1051/4 ............3/8in. Drive 1/4in. 6 Point SocketMTN1055/16 ..........3/8in. Drive 5/16in. 6 Point SocketMTN1053/8 ............3/8in. Drive 3/8in. 6 Point SocketMTN1057/16 ..........3/8in. Drive 7/16in. 6 Point SocketMTN1051/2 ............3/8in. Drive 1/2in. 6 Point SocketMTN1059/16 ..........3/8in. Drive 9/16in. 6 Point SocketMTN1055/8 ............3/8in. Drive 5/8in. 6 Point SocketMTN10511/16 ........3/8in. Drive 11/16in. 6 Point SocketMTN1053/4 ............3/8in. Drive 3/4in. 6 Point SocketMTN10513/16 ........3/8in. Drive 13/16in. 6 Point SocketMTN1057/8 ............3/8in. Drive 7/8in. 6 Point Socket

Fractional Deep 6 Point SocketsMTN1051/2D..........3/8in. Drive 1/2in. 6 Point Deep SocketMTN1053/8D..........3/8in. Drive 3/8in. 6 Point Deep SocketMTN1057/16D........3/8in. Drive 7/16in. 6 Point Deep SocketMTN1051/2D..........3/8in. Drive 1/2in. 6 Point Deep SocketMTN1059/16D........3/8in. Drive 9/16in. 6 Point Deep SocketMTN1055/8D..........3/8in. Drive 5/8in. 6 Point Deep SocketMTN10511/16D......3/8in. Drive 11/16in. 6 Point Deep SocketMTN1053/4D..........3/8in. Drive 3/4in. 6 Point Deep SocketMTN10513/16D......3/8in. Drive 13/16in. 6 Point Deep SocketMTN1057/8D..........3/8in. Drive 7/8in. 6 Point Deep Socket

Spark PlugMTN1059/16SP ......3/8in. Drive 9/16in. FORD ................................F-150 Spark Plug Socket

Metric 6 Point SocketsMTN1056M.............3/8in. Drive 6MM 6 Point SocketMTN1057M.............3/8in. Drive 7MM 6 Point SocketMTN1058M.............3/8in. Drive 8MM 6 Point SocketMTN1059M.............3/8in. Drive 9MM 6 Point SocketMTN10510M...........3/8in. Drive 10MM 6 Point SocketMTN10511M...........3/8in. Drive 11MM 6 Point SocketMTN10512M...........3/8in. Drive 12MM 6 Point SocketMTN10513M...........3/8in. Drive 13MM 6 Point SocketMTN10514M...........3/8in. Drive 14MM 6 Point SocketMTN10515M...........3/8in. Drive 15MM 6 Point SocketMTN10516M...........3/8in. Drive 16MM 6 Point SocketMTN10517M...........3/8in. Drive 17MM 6 Point SocketMTN10518M...........3/8in. Drive 18MM 6 Point SocketMTN10519M...........3/8in. Drive 19MM 6 Point Socket

Metric Deep 6 Point SocketsMTN10510MD........3/8in. Drive 10MM 6 Point Deep SocketMTN10511MD........3/8in. Drive 11MM 6 Point Deep SocketMTN10512MD........3/8in. Drive 12MM 6 Point Deep SocketMTN10513MD........3/8in. Drive 13MM 6 Point Deep SocketMTN10514MD........3/8in. Drive 14MM 6 Point Deep SocketMTN10515MD........3/8in. Drive 15MM 6 Point Deep SocketMTN10516MD........3/8in. Drive 16MM 6 Point Deep SocketMTN10517MD........3/8in. Drive 17MM 6 Point Deep SocketMTN10518MD........3/8in. Drive 18MM 6 Point Deep SocketMTN10519MD........3/8in. Drive 19MM 6 Point Deep Socket

tool Storage


MTN3326Drawer for Service Cart• Add this drawer to yourexisting service cart

MTN3327Shelf for Service Cart• Add this shelf to yourexisting service cart

MTNXH-TT-111Work Table and Parts Washer• 3-1/2 gallon parts washer and work table all in one unit• 4" heavy duty casters - 2-casters lock for convenience• Tool storage drawer on ball bearing slides• 27.5" x 16" work table with 3/4" frame• Combination cleaning table

MTNTOOLBAGHeavy Duty Tool Bag• Removeable andadjustable strap

• Durable plastic bottom• 19.5" x 13" x 16.25"• Side pockets for organized storage

MTNSMTOOLBAGSmall Tool Bag• Made of heavy duty polyester• Size: 16.25" x 9" x 16.5"• Removeable and adjustable shoulder strap• Plenty of storage

MTN3550Magnetic Pry Bar Holder• Great foldable design for long pry bars• Can be attached on to any iron part of a tool cabinet• Accommodates more than five pry bars• Keeps the tools in one place for easy accesseliminating inconvenience of searching for tools

• Powder coated steel

MTN3500Expandable Rubber Magnetic Parts Dish• Dish expands to 3-1/2"• Magnetic base perfect for holding small parts, hardware and fasteners• Can be used horizontally, vertically, upside down or hung on a hook• Rubber covered to prevent scratching• Conveniently flattens for easy storage

Magnetic dish goes from being conveniently stored flat to expanding toa 3-1/2" deep dish. The magnetic base is perfect for holding small parts,hardware and fasteners in place and is deep enough to hold non-magnetic parts. Sticks to ferrous metal surfaces.

tool Storage


MTNTBR4907-SILVER (Silver)

MTNTBR4907-RED (Red)

MTNTBR4907-BLUE (Blue)

MTNTBR4907-BLACK (Black)

46" 6 Drawer Mobile Work Station with Pull-Out Work Table• Drawers with ball bearing slides that support 150 lb• Extreme duty 6" X 2” shockproof casters• Quality skid proof drawer liners• Theft proof side locking system• Durable powder coat finish• 1 year warranty on material & workmanship

This unit sits on extreme duty 6" X 2” shockproof casters that are made to stand up to the load. A theft proof side locking system is incorporated in to the design. Dimensions: 46"L x 18"W x 36.2"H or 43"H with casters.

MTNTBT4905A-SILVER46" 5 Drawer Silver Top Chest• Mirror polished panel inside top• Gas supports for top• Heavy gauge construction of 18 gauge steel• Quality drawer liners• 5 drawer configuration ball bearing slides with up to 150 lb rating

• 2 sided pull out drawer enables the user to utilize theclip board style hanging system to hold cables, tapes, cords and other items . Hooks included.

• 1 year warranty on material & workmanship

The 5 drawers that are 18” deep offer plenty of storage. A theft proof side locking system is incorporated into thedesign. Dimensions: 46"L x 18"W x 21.90"H.Available in Silver only

Top Chest available in SILVER only

Features a

diamond plated pull out work table

2 sidedpower toolholder

Tool Cabinet available in:SILVER RED BLUE BLACK

tool Storage


72" 2 Drawers Side Cabinets• 2 drawers with skid proof drawer liners• Ball bearing slides• 2 adjustable shelves• Access point in back to add electric supply• Powder coat finish• 1 year warranty on material & workmanship

The side cabinet for the 72” tool box has 2 drawers withquality skid proof drawer liners and 2 adjustable shelves.Also featured is an access point in back to add electricsupply inside the cabinet to power and recharge select tools.The upper drawer is 3” deep and the lower drawer is 6”deep on ball bearing slides. Both drawers have a 55 lbcapacity. A theft proof lock is incorporated in to the design. Dimensions: 22"L x 29"W x 63"H. Weight: 251 lbs.

MTNTBS8102A-XRED (Red)

MTNTBS8102A-XBLUE (Blue)

MTNTBS8102A-XBLACK (Black)

72” wIde


72" 12 Drawers Top Chests• Split top with mirror polished panel inside both panels• Gas lift supports make both sides easy to open and close• 12 drawers that are 26.5” deep withball bearing slides that handle 150lb

• Quality skid proof drawer liners are included• Theft proof side locking system• 1 year warranty on material & workmanship

Left side is 50” and the right is 26” wide. Drawer widths are 14.5” and 30.5” wide. Box features durable powder coat finish. Dimensions: 72"L x 29"W x 26"H. Weight: 756 lbs.

MTNTBT8112CA-XRED (Red)

MTNTBT8112CA-XBLUE (Blue)

MTNTBT8112CA-XBLACK (Black)

56" 2 Drawer Side Cabinets• 2 drawers with skid proof drawer liners• Heavy duty 18 gauge steel construction• Full extension ball-bearing drawer slides provide smoothdrawer operation, holding up to 55 lbs. per drawer

• 2 adjustable shelves• Access point in back to add electrical supply• Upper drawer is 3” deep and the lower drawer is 6”deep on ball bearing slides

• Both drawers have a 55 lb capacity• Features a theft proof locking system• 1 year warranty on material & workmanshipDimensions: 16"L x 22"W x 60H. Weight: 134 lbs.

MTNTBS8002-SILVER - Silver

MTNTBS8002-XBLUE - Blue

MTNTBS8002-XRED - Red

MTNTBS8002-XBLACK- Black

56" 8 Drawer Top Chests• Gas-strut lid supports• Heavy duty 18 gauge steel construction• Full extension ball-bearing drawer slides provide smoothdrawer operation, holding up to 150 lbs. per drawer

• Includes quality drawer liners• Features a theft proof side locking system• 1 year warranty on material & workmanship• 8 drawers are 26.5" deep. Dimensions: 56"L x 22"W x 25"H. Weight: 371 lb.

MTNTBT8008A-SILVER - Silver

MTNTBT8008A-XBLUE - Blue

MTNTBT8008A-XRED - Red

MTNTBT8008A-XBLACK - Black

56" 10 Drawer Bottom Cabinets• Heavy duty 18 gauge steel construction• Extreme duty 6" X 2” shockproof casters• Full extension ball-bearing drawer slides provide smooth drawer operation, holding up to 150 lbs. per drawer

• Quality drawer liners• Features a theft proof side locking system• Features extreme duty 6" x 2" shockproof casters• 1 year warranty on material & workmanshipDimensions: 56”L x 22”W x 42”H (with castors); 35”H (without). Weight: 584 lbs.

MTNTBT8010A-SILVER - Silver

MTNTBT8010ABLUE - Blue

MTNTBT8010A-RED - Red

MTNTBT8010A-BLACK - Black

tool Storage

72" 20 Drawers Tool Cabinets• 20 drawers on ball bearing slides• Drawer configuration has multiple sizes• Extreme duty 6’ X 2” shockproof casters• Quality skid proof drawer liners are included• Theft proof side locking system• 1 year warranty on material & workmanship

Drawer configuration features multiple sizes rated to hold150 to 300 lbs depending on the size of the drawer. Cabinet features durable powder coat finish. Dimensions: 72"L x 29"W x 46"H. Weight: 1068 lbs.

MTNTBR8120BA-XRED (Red)

MTNTBR8120BA-BLUE (Blue)

MTNTBR8120BA-BLACK (Black)

paint and Body

20

MTN41171.4mm HVLP Gravity Feed Spray Gun• HVLP (High volume low pressure) spray gunmake the spraying softer, easily controlled and less overspray

• Includes adjustable fluid, pattern and air controls

• Stainless steel needle and nozzleaccommodate a variety of coatings

• Large 1000ml, chemical-resistant aluminum paint cup

• Precise air cap set

Adjustable flow rate and spray pattern of 7"-10".Applicable in waterborne products. Ergonomicdesign for comfortable grip. Working pressure:29-50 psi. 1/4" NPS air inlet.

MTN41181.8mm HVLP Syphon Feed Spray Gun• HVLP (High volume low pressure) spray gun make the spraying softer, easily controlled and less overspray

• Includes adjustable fluid, pattern and air controls

• Stainless steel needle and nozzle accommodate a variety of coatings

• 1000ml aluminum syphon feed paint cup• Precise air cap set

Adjustable flow rate and spray pattern of 6.5"-8". Applicable in waterborne products. Ergonomic designprovides comfortable grip. Working pressure: 36-50 psi. 1/4" NPS air inlet.MTN4116-RK

Replacement Parts for SprayGun MTN4116• OE Parts • 1.5 Nozzle• 1.5 Needle • 1.5 Air Cap

MTN4118-CUPReplacement Cup for Spray Gun MTN4118• OE parts• 1000ml syphon feed aluminum cup

MTN4118-RKReplacement Parts for SprayGun MTN4118• OE parts • 1.8 Nozzle• 1.8 Needle • 1.8 Air Cap

MTN41161.5mm LVLP Gravity Feed Spray Gun• LVLP (Low Volume, Low Pressure) technology provides a 11" pattern with more material in pattern and less overspray in high transfer efficiency

• Superior atomization suitable for all kinds of surface

• Low air consumption• Precision manufactured for High transfer efficiency and consistent spray pattern

• Stainless steel needle and nozzle

Adjustable air volume, paint volume and spraying pattern of 7"-11".Also features large 1000ml, chemical-resistant aluminum paint cup.Applicable in both solvent and waterborne products. Nickel platedgun body, durable and wear resistant. Ergonomic design forcomfortable grip.

MTN4116/4117-CUPReplacement Cup ForMTN4116 and MTN4117• OE parts• Premium quality replacement cup• 1000 ml gravity feed cup• Cup has female threads that fit numerous other spray gun models.

MTN4117-RKReplacement Parts for SprayGun MTN4117• OE parts • 1.4 Nozzle• 1.4 Needle • 1.4 Air Cap

Quality, Selection and Value

MTN4202Mountain Disposable QuartMixing Cup (100 per case)• Recommended by major paint companies• Contains popular mixing ratios• Environmentally smart• Economical• Made in USA

paint and Body

21

MTN4001Siphon Feed Detail Spray Gun - 1.4mm Nozzle• Aluminum and stainless steel construction• All-purpose easy to clean paint spray gun• Two-piece construction with gun featuring exclusive air valve design

• Fully adjustable wide fan pattern control

Specifications:• 1.4mm nozzle for spotting, shading and detail work

• .25L aluminum cup• Maximum spray pattern approximately 6"• Operating pressure: 40-50 PSI• Average air consumption: 4 cfm• Air inlet thread size: 1/4" NPT

MTNRP8824-A4 Piece Waterborne H.V.L.P. Spray Gun Kit• Ideal for automotive, furniture and equipment painting• 1.4mm spray gun is used to apply lighter materials such as base and clear coats

• 1.7mm spray gun is used to apply heavy materials such as primers

• 1.0mm touch up gun is used to apply lighter materials and touch up work

• Air adjusting valve provides control of air flow at the spraygun, giving you more control. Cleaning kit keeps spray gunsin top working condition for better painting results.

• Lifetime warranty - does not cover abuse.

Kit Contents:1pc- HVLP Spray Gun with 1.4mm Needle and Nozzle Set1pc- HVLP Spray Gun with 1.7mm Needle and Nozzle Set1pc- Touch up Gun with 1.0mm Needle and Nozzle Set1pc- Pressure Regulator with gauge2pcs- Liter Aluminum Cup1pc- 150cc Stainless Steel Cup3pcs- Optional Filter2pcs- Spanner1pc- Socket Spanner 1pc- Brush1pc- Aluminum case

MTN4025A250cc Mini Gravity Feed Aluminum Cup

MTNRP8031K3428 Piece Spray Gun Kit• Fluid control knobs assist in paint flow• Fan pattern knob provides control of the spray pattern allowing for superior finish quality

The 28 piece paint gun kit is the only set you will need toperform many types of painting tasks. The kit includes (2)-1.4mm Gravity feed spray guns; (2)-plastic 120cc cups; (2)paint regulator and gauges; (7)-paint strainers; (2) 1/4" nptmale plugs; (5) filters; (1) tape rolls; (5) wood picks; (1)cleaning brush; (1) spanner wrench; and molded storage case.

• One year warranty

MTN6182Air Regulator With Gauge• Includes a 0-160 PSI pressure gauge• Provides fine air control for spray guns and air tools• Swivel top allows for easy installation• Infinite adjusting range fits any spray gun or air tool inlet• Air outlet: 1/4"NPT

MTN6183Air Regulator for Devilbiss Paint Guns• Easy installation - 5/16" thread size• Includes 0-160 psi pressure gauge• Included in a display package• 1 year limited warranty

MTN4206-3Cross Cut 3” Orange Foam Pad

MTN4206Headlight Renewal Kit• One step headlightrenewal kit with micro fiber cloth

• Includes 3" foam pad• Includes 3" backing plate• Includes MTN4203-2 Universal Polish• High quality micro fiber cloth is 16" X 16"

MTN45264 inch Plastic Spreaders 100 Pieces Per Box• Ideal for spreading body filler

ProfessionalDual ActionRandom OrbitalSanding Pads• Great for PBE repair• Fits most popular DA sanders• Works on high speeds• Ideal for all types of body or fender work• A must have for every tool box• Maximum operating speed: 10,000 RPM.

MTN6916V - with Velcro Backing• 6" in diameter with 5/16" x 24 thread attachment• Fits all popular dual action sanders with 5/16" x 24 thread attachment

MTN6906 - with Self-Adhesive Backing• 6" in diameter with 6 mounting holes• Fits all popular dual action sanders with 5 or 6 mounting holes


lifting equipment


9K 4-Post Service/Storage Lifts • Adjustable internal lock ladder system for lift leveling• Lifting Capacity - 9,000 lbs. (4082 kg)• Rise Height - 73 1/4” (1680 mm)• Overall Width - 106” (2692 mm) • Overall Length - 212” (5885 mm)• Inside Columns - 95” (2413 mm) • Height of Columns - 94 1/2” (2185 mm)• Width of Runways - 20 (508 mm) • Height of Runways - 5” (127 mm)• Width between Runways - 38” (965 mm)• Length of Runways - 164” (4166 mm)• Approach Ramp Length - 36” (914 mm)• Motor - 1 HP• Voltage Single Phase - 110v or 220v

MTN5593B - Black Installed

MTN5593R - Red Installed

MTN5593BU - Black Uninstalled

MTN5593RU- Red Uninstalled

These professional grade 9,000 lb 4-Post lifts can be used for light-duty service applications as well as a home storage/parking lift. This lift is ALI/ETL certified meeting all ANSI national safety standards.

• Free standing or bolt-down options available• Formed runways with rail system offers smooth rolling for optional rolling jack• With adjustable internal lock ladder system for lift leveling and "Slack cable" system provides additional security• One year warranty on parts and labor• Installation/owners manual available electronically upon request• Fork Lift required for delivery & unloading and must be provided by customer/shop. Delivery service will not provide Forklift.• Delivery Included in the Continental U.S. only

9K 4-Post Extended Height Service/Storage Lifts• Offers 80 underneath runway versus standard model of 67-3/4"

• Lifting Capacity - 9,000 lbs. (4082 kg)• Rise Height - 85 1/2” (2171 mm)• Overall Width - 106” (2692 mm) • Overall Length - 232” (5893 mm)• Inside Columns - 95” (2413 mm) • Height of Columns - 96 1/2” (2451 mm)• Width of Runways - 20 (508 mm) • Height of Runways - 5” (127 mm)• Width between Runways - 38” (965 mm)• Length of Runways - 188” (4775 mm)• Approach Ramp Length - 36” (914 mm)• Motor - 1 HP• Voltage Single Phase - 110v or 220v

MTN5595B - Black Installed

MTN5595R - Red Installed

MTN5595BU - Black Uninstalled

MTN5595RU - Red Uninstalled*Minimum Requirements for Mountain Lift Installation:Service bay must meet minimum space requirements and be clear of allobstructions. Concrete must meet a minimum thickness of 4 inches. Compressionstrength minimum 3,500 psi. Mounting points must be a minimum of 8 inches awayfrom cracks and expansion joints (refer to installation manuals for specifics).Electrical connection must be done by a licensed electrician (codes vary throughoutthe U.S) and is not included in cost of lift. HYDRAULIC OIL IS NOT INCLUDED.

lifting equipment


Mountain 2 Post 12K Automotive Lift• 12K lifting capacity - ALI Certified Lift• 3-Stage front arms lift Symmetrically• Single point mechanical lock release• Padded overhead shut off bar with rubber door guards• Premium powder coat finish• Installation/owners manual available electronically upon request• One year warranty on parts and labor• Fork Lift required for delivery & unloading and must be provided by customer/shop. Delivery service will not provide Forklift.

INSTALLED Units• Delivery Included in the Continental U.S. only

MTN5594R - Installed - RedMTN5594B - Installed - Blue

UNINSTALLED Units • Delivery Included in the Continental U.S. only

MTN5594RU - Uninstalled - Red

MTN5594BU - Uninstalled - Blue

INSTALLED Units• Delivery Included in the Continental U.S. only

MTN5590 - Blue

MTN5590R - Red

Mountain 2 Post 10K Automotive Lift*• 10K lifting capacity - ALI Certified Lift• 3-Stage front arms lift both Asymmetrically and Symmetrically within same service bay

• Single point mechanical lock release• Padded overhead shut off bar with rubber door guards• Premium powder coat finish• Installation/owners manual available electronically upon request• One year warranty on parts and labor• Fork Lift required for delivery & unloading and must be provided by customer/shop. Delivery service will not provide Forklift.

UNINSTALLED Units • Delivery Included in the Continental U.S. only

MTN5590U - Blue

MTN5590RU - Red

2' Column Extensions for MTN 10K 2 Post Lift• Powder coated• Kit includes new cables• Kit includes hose extension• Accommodates higher profile vehicles

MTN5590EXTU - Blue

MTN5590REXTU - Red


MTN55921,000 Lb. Capacity Motorcycle ATV Lift - Black• Precision formed platforms and scissor arms• Integrated base for stability and smooth operation• Dual foot pedal air controls easy to operate and safe• Multiple lock positions• Rear drop panel for ease of maintenance of rear wheel• Maximum raised height: 35"; lowered height: 7.25"; platform width: 24";platform length: 84"; air supply required: 85-115 PSI.

• Fork Lift required for delivery and unloading and must be provided bycustomer/shop. Delivery service will not provide Forklift.

• Delivery Included in the Continental U.S. only

One year warranty on parts and labor.

MTN5606A6 Ton Bottle Jack• Lift range: 8.5" to 17"

6, 12 & 20 Ton Bottle Jacks• Ductile iron base for added strength• Heat treated extension screw increases low height to get full use of ram travel

• Hydraulic bypass system prevents over extension of ram• Two-piece slip fit handle for controlling the release valve and pumping the jack


MTN5612A12 Ton Bottle Jack• Lift range: 9.1" to 18.5"

MTN5622A20 Ton Capacity Bottle Jack• Lift range: 9.5" to 18.5"

MTN5620AHA20 Ton Capacity Air Over Hydraulic Bottle Jack• Designed to operate either manually or pneumatically• Air hose swivels any direction• Safety valve prevents overloading• 2-piece handle• Extension screw provides added height when necessary• Minimum air pressure required is 90 PSI / 6.2 BAR

Specifications:• Capacity: 20 tons• Power lift: 16-1/2"• Closed height: 10-1/2"• Raised height: 20"• Additional screw adjustment: 3-1/2"

MTN5505A5 Ton Floor Jack• Foot pump pedal raises the lift arm to the load quicklyand “T” handle pumps jack under load

• Rear kick plate helps turn jack in tight places• Release knob on top of handle• Overload and bypass safety valves• Lift range: 5" to 22"

A heavy duty service jack designed for continuous,dependable performance in fleet truck shops, farmequipment dealers, bus company garages andcommercial vehicle service bays.


MTN5520A22 Ton Air/Hydraulic Truck Jack• Self-retracting ram springs for fast ram retraction

• Narrow chassis design fits easily between tandem wheels

• Four adapters (1.875" and 2.625"diameter saddles, 2" and 4"extension adapters) with handle mounted saddle holder included

• Release knob on top of handle

• Lift range: 8.37" to 21.12"

Designed for heavy duty truck and trailer shop use, rail andbus work, and portable for roadside service calls.


lifting equipment

lifting equipment


MTN5506A3-1/2 Ton Quick Lift Service Jack• High carbon steel side plates• Wiper seals protect hydraulic system from contaminants• Wide front wheels and ball bearing rear casters for stability• Overload and bypass safety valves• Lift range: 3.87" to 20.5"

A heavy duty service jack designed for continuous,dependable performance in any automotive service and repair shop.• 1 year warranty on material and workmanship.

MTN5112A12 Ton Jack Stands (Pair)• Lift range: 19.5" to 30"• 1 year warranty on materialand workmanship.

MTN5106A6 Ton Jack Stands (Pair)• Lift range: 15.5" to 24"• 1 year warranty on materialand workmanship.

MTN5506AJ3-1/2 Ton Floor Jack Pack with 3 Ton Jack Stands• High carbon steel side plates• Wiper seals protect hydraulic system from contaminants• Service Jack lift range: 3.87" to 20.5"• Jack stand lift range: 11.25" to 17"• A must for every shop or technician

Heavy duty service jack designed for continuousdependable performance in any automotive service andrepair shops. Jack stands are used in pairs for supportingautomotive vehicles after lifting.• 1 year warranty on material and workmanship.

MTN5176A3/4 Ton Adjustable Single Post Underhoist Stand with Pedal• 12" Diameter base for stability• Bearing mounted spin handle and self-locking Acme threaded screw provide easy turning and height adjustment under load

• Contoured saddle supports most component configurations

• Lift height: 53" to 79"

Designed to support vehicle components only andideal for exhaust system installations and shockabsorber replacement.• 1 year warranty on material and workmanship.

MTN5175A3/4 Ton Single Post Underhoist Stand• 12" Diameter base for stability• Self locking threaded screw for easy height adjustment• Bearing mounted spin handle• Lifting height: 53" to 79"

Designed to support vehicle components only and ideal for exhaust system installations and shock absorber replacement.• 1 year warranty on material and workmanship.

MTN5103A3 Ton Jack Stands (Pair)• Lift range: 11.25" to 17"• Four legged steel base• Self locking handle with locating lugs• Ductile iron support column with ratchet teeth provides multiple height

• Large saddles with locating lugs provide support• Used in pairs for supporting automotive vehicles after lifting


MTN5174A2 Ton Tripod Underhoist Stand• Support column with six different height positionsprovides a work range from 48-3/4” to 78-3/8”

• Bearing mounted spin handle adjusts an Acme threaded extension screw with 5-5/8” of travel for fine adjustment

• 24” triangular base provides stability and 3-1/8” square rubber saddle provides good grip and protection of vehicle frame

• Saddle size: 3.125"• Designed to help support and stabilize a vehicle on anin-ground or above-ground lift. Must be used in pairs.


MTN5116A1,500 Lbs. Engine Sling• Turn the bearing mounted hand crank to compensate for off balanced loads or at a required angle for engine alignment

• Four chains and mounting brackets included

Used with an engine crane to handle and position engines and heavy shop loads. Capacity: 3/4 Ton; Overall Length: 18"; Shipping Weight: 14.3 lbs.• 1 year warranty on material and workmanship.


MTN700Heavy Duty Universal Disc Brake Pad Spreader• Handles single and dual piston applications• Usage for FORD F-150 and 250, front wheel drive GM

• Allows installer to easily compress both pistons at once

• Can save up to 30 minutes per job• Patent pending• Made in the U.S.A

MTN51191.5 Ton Foldable Engine Crane• Rapid rise hydraulic jack raises boom six times faster without a load than standard cranes

• 4.25" Low profile base provides easy access under vehicles with low ground clearance

• Legs and boom can be folded quickly andeasily to save space when not in use

• Chain and swivel hook assemblyallow for easy positioningof engine

For raising, lowering and transporting of automotive engines and other heavy shop loads.

lifting equipment

MTN21571000 Lb. High Lift Transmission Jack• Foot activated release pedal• Universal saddle with four ratcheting arms• Overload safety valve• Wide base with swivel casters for stability• Lift range: 35.5" to 74"

Used for the removal, installation andtransporting of transmissions and transfer cases on vehicles that are supported by lifts.

1 year warranty on material and workmanship.

MTN5137A750 lbs. Engine Stand• Fully adjustable mounting head and adapter fingers

• Long handle rotates mounting head• Two rigid rear caster wheels and twofront ball bearing mounted swivel caster wheels for easy maneuverability

• Standard duty design•Can ship FED EX or UPS

A standard duty engine stand for the budget conscious user who still wantsthe quality of a Sunex product to handle most automotive repair shop work.Capacity: .5 ton; overall length: 33.85"; overall width: 31"; overall height:34.5"; shipping weight: 55 lbs.

MTN5138Geared Engine Stand• 63 to 1 ratio gearbox easily rotates engine to desired position by turning a crank handle

• Worm drive gearbox is self-locking in any position• Space saving foldable design for storage• Fully adjustable mounting head and adapter fingers• Two rigid rear caster wheels and two front ball bearing mounted swivelcaster wheels for easy maneuverability; swivel caster wheels include locksto prevent stand from moving

Used for handling and positioning of most automotive engines requiringrepair or rebuild. Capacity: .5 ton; Overall Length: 34.25"; Overall Width:36.5"; Overall Height: 36"; Shipping Weight: 96lbs.

MTN5551A1,200 Lb. Low Profile Transmission Jack• Universal adjustable saddle with four brackets that can be lined up with the transmission pan configuration

• Open end chassis provides lower lift point• Safety chain and adjustment hardware to secure load• Overload safety valve• Pump handle rotates 360 degrees for operation from any direction

MTN55551.5 Ton Floor Transmission Jack• Universal adjustable saddle with four brackets thatcan be lined up with transmission pan configurations

• Wide chassis for load distribution and stability• Overload and bypass safety valves• Safety chains and adjustment hardware to secure load• Integrated chassis trays hold tools and hardwarediesel truck transmissions

Vehicle Specialty tools


MTN59006" Stainless Steel Caliper with Case• 0-6" Range (0-150mm)• Large easy to read LCD display• Comes in a plastic case to store when not in use• Hardened stainless steel • Zeroing feature• Thumb wheel and lock • Comes with extra battery

MTN45077 PieceLockout Kit Includes: • (1) Slim Jim• (2) Wooden door wedges• (1) Slide Jim• (1) Plastic Slip Jim• (1) Lock tech tool and instructional manual

MTN9001Pilot Bearing Puller• Only 7 1/2" long• Can also be used to pull bearings or bushings fromgenerators or starters

• Includes 1/2" to 1 1/4" ID Capacity jaws• Strength - helps pull out tough bearings• Short length - allows reach into tighter areas• Versatility - works on automobiles, trucks, and tractors• Made in the U.S.A.

When working space is limited, this type of puller is needed to removeflywheel pilot bearings from automobiles, trucks, and tractors

MTN9030Ford Low Profile Fuel Filter Wrench• Low profile design allows access in tight quarters• Fits both housing lids on the Ford power stroke diesel fuel filter

• Pressure points evenly distributed• Spreads the force of the removal over six contact points instead of two,preventing breakage

• Patent pending

This tool is used for removal and installation of fuel filter on the FordPower stroke diesel and International/Navstar Diesel engines.

MTN9201Replacement Spark Plug Insert For Mountain Ford Cylinder Head Spark Plug Repair Kit• Patented lip makes sure there is no loss of compression• Permanent fix to damaged Cylinder threads• Replacement insert for the MTN9200 repair kit• Replacement spark plug insert for Ford engines• Used to repair damaged cylinder heads with blown spark plugs

Replacement insert for the Ford Cylinder Repair Kit (MTN9200). Packaged1 insert per kit, in poly bag with label. Alloy steel insert.

MTN5910Digital Brake Gauge• Measuring range: 0-150mm / 0-6”• Accuracy: + 0.02mm / 0.001”• LCD display• Includes: One silver oxide battery SR44,1.55v

MTN1893Heavy Duty Seal Puller• Alloy steel, heat treated blade for strength• Low profile blade for tight access• Heavy duty chock handle for leverage• Works on most seals, even import seals with limited access• Made in the U.S.A

MTN11044 Piece SAE Chrome-Moly Steel Stud Puller Set• Ideal for removing broken studs and screws• Made of Industrial grade chrome molybdenum (chrome-moly) steel alloy

• Comes in blow molded caseIncludes sizes 1/4", 5/16", 3/8", and 7/16".

MTN9200Ford Spark Plug Insert Installer Set• With this item cylinder can be repaired without removing the head - takes a little less than an hour, saving the mechanic about 1 day worth of labor

• Alloy steel insert is a quality insert that will permanently mount in the spark plug hole and will not deteriorate or fall out

• Guide insures that tap and reamer are used in a straight line - no installing the spark plug crooked

• Comes with a DVD that explains job in detail - easy to follow instructions• Cost of this set is far less than the competitors in the field

Designed to aid in repairing Ford modular cylinder heads. A quality foolproof repair system that is fast, cost effective, and simple to use. Used torepair damaged threads from blown or deteriorated spark plugs in 4.6L,5.4L, and Ford V10 Triton engines.


MTN91018 Piece Fuel andTransmission LineDisconnect Tool Set• 8 Piece Fuel and Transmission Line Disconnect Tool Set is made of Anodized aluminum and comes in a blow molded case

• Fits and 5/16" or 3/8" fuel line found on GM, Ford or Chrysler cars• Works on 1986 and newer Ford Taurus and Mercury Sable with anAXOD, AOD or ATX transmission

• Works on 1990 and newer Ford Ranger and Explorers with 4.0L, 6 cylinder engines

• Releases the fingers on the transmission-to-radiator oil cooler line easily without damage to the hose or connector

This 8 piece fuel and transmission line disconnect tool set works onseparating fittings on fuel lines, fuel filters and fuel tank return lines. The quick coupler tool is designed to slide down the line and into theconnector; separating the clip apart without damaging the quick connectseals allowing removal of the clip. Also used to separate automatictransmission oil cooler lines on Ford Taurus and Escort with AXOD andATX transmission.The disconnect tool allows quick separation of quickconnectors found on radiators, transmissions and power steering lines. Itreleases the fingers on transmission-to-radiator oil cooler line easilywithout damage to the hose or connector. Also the fuel line disconnecttool allows damage free fuel line quick connect coupler release. Setincludes sizes 1/4”, 5/16”, 3/8” and 1/2” Oil Cooler Line Disconnect Tool.

MTN4356Radiator Pressure Test Kit• Use pressure pump with adapters to test radiator and cooling system

• Blow molded case keeps tools organized and easy to carry

MTN683Master Line Disconnect Set• Largest collection of disconnect Tools available

• Disconnect tools for fuel, AC,transmission and oil lines

• Comes in a sturdy blow molded case• Includes application chart by vehicle

MTN8057Oil Filter Wrench• Can be operated with 3/8" driver or 3/4" wrench• So strong it can be used with an impact wrench• Fits all sizes of oil filters from 2-1/2 in. to 4-5/16 in. diameter

MTN90200Master Spring Compressor Set• High quality = great value• Coil spring compressor for inner coils• Blow molded case for easy storage• Ideal for shop or tech applications• Professional quality spring compressor

MTN034-00Pit Stop Glove - 6 Pack• Stops liquids from running down your arm or onto the ground

• Enhances grip, while maintaining full dexterity and good sense of touch

• Durable liquid collection cuff and storage container• Built to be used multiple times! Secure lid for storage• Comfortable one size fits all construction

6 PACK

MTNUL3939 Watt Underhood Light• Telescoping bracket allows for use on hoods from 47" to 76"• Soft foam covered ends protect hood finish• Super bright illumination using new T5 fluorescent technology• Quick change bulb replacement• 25 ft. ETL approved cord

MTNUL39-4PKUL39 Replacement Fluorescent Bulb (4 Pack)• Super bright, new type 39W T5 fluorescent bulb• Premium quality replacement bulb - OE product

MTN85044-in-1 Swivel Oil Filter Wrench• User capability to handle filters from 2-3/8” to 4-3/8” with one kit

• Easily interchangeable by removing and installing to detente pins

• Buyers obtains four filter wrenchesfor the price of two

• Made in the U.S.A

Vehicle Specialty tools

lighting

telescopes from 47” to 76”

MTN8051Medium Swivel Oil Filter Wrench• Size range 3-7/16" to 3-3/4"• Swivel handle• Wide dimple band to grip filter firmly• Easy grip vinyl handle for comfort• Can reach filters in hard to reach areas

electronics and diagnostics


MTN8720Digital Multimeter with Built-in Temperature Readings• Temperature readings built-in, temp probe included

• Large, backlit LCD display, numbers are easy to read

• Dual fuse protection - mA fuse and 10 A fuse• Data Hold capability• Includes test leads, protective holster, temp probe, battery and instructions

Full function Digital Multimeter with temperature readingsbuilt-in. 7 testing functions and 20 testing ranges overall.Unit features large, backlit LCD display, Data Holdcapability and fused 10 Amp range. Test functions: DCVolts, AC Volts, DC Amps, Ohms, Temperature F and C,Continuity Beep and Diode Test. Nice tester for all aroundelectrical troubleshooting.

MTN8750Auto Meter• EZ use - single switch operation• Automatically selects DC Volts,AC Volts, or Ohms

• 0-600 Volts AC and DC• Large 4000 count display• Auto Power off after 10 minutes

MTN2100Check Point Circuit Tester• Quickly checks 6 and 12 volt systems• Supplied with 48" ground wire

MTN2390In-Line Ignition Spark Checker• Use to quickly trouble shoot ignition system

MTN2730Heavy Duty Circuit Tester withRetractable Wire and Battery Clip• Features an extra long wire that stretches up to 12feet for use, then automatically retracts

• Use for 6 and 12 volt vehicles

MTN2700Heavy Duty Circuit Tester• For checking 6 and 12 volt systems• 5' of tough, flexible, heavily insulated rubber wire Is retained in springsupported strain relief designed to withstand most rugged use

MTN2800Heavy Duty Automotive Logic Probe• Test high and low voltages on 6, 12 and 24 volt systems• High impedance; current draw less than 18 milliamps to protect sensitiveelectronic sensors, microprocessors, electronic ignition components andair bags

• Dual color LED indicates red for power (high) and green for ground (low)• 6' of heavy duty 18 gauge dual leads with large battery clips for easy hook-up

MTN2810Computer Safe Automotive Logic Probe• For 6, 12, and 24 volt systems• Insulated probe has an exposed length of 3-3/8"• Has 6' of heavy duty, 18 gage dual leads with largebattery clips for easy hook-up

MTN5140LED Brake Fluid Tester• Check quality of brake fluid• CE and RoHS approval• Suitable for DOT4 brake fluid• Digital brake fluid tester• 5 LEDs indicating the water% in the brake fluid

MTN1461Rubber Bulb Battery Filler• Bulb has a 6 oz. capacity• 6" Flexible spout• Pliable in cold weather• Lightweight and easy to use• Designed for long life anddependable service

MTN1850Air Operated Spark Plug Cleaning Tool• Internally controlled abrasive blasting• Uses ordinary air line pressure• Lever valve allows for blasting with abrasive/air mix or pure air only

• Abrasive material is included and is silica free

The recommended air line pressure is 70-80 PSI, maximum 90PSI. The unit comes ready to use and includes (1)- 1/4 poundbag of abrasive silica free as an added value.

MTN11LCD MultiFunction AutoElectrical Tester• Power supply forcircuit testing

• Test for voltage,polarity and continuity

• Locate missing cylinder• Measure frequency ofignition pulse

• Detect peak

This is professionalequipment for testing the automotive electrical systemwithin 6-24VDC. In order to save the testing times, it isspecially designed to test the system without re-connectionbetween the vehicle battery and the testing components.

Shop equipment


Operating Hose HosePart Number Type of Hose Reel Pressure I.D. LengthMTNHR250 Grease 5,000 PSI 1/4in. 50ft. MTNHR350 Air, Water, Antifreeze 300 PSI 3/8in. 50ft. MTNHR335 Air, Water, Antifreeze 300 PSI 3/8in. 35ft. MTNHRL550 Air, Water, Light Oil 300 PSI 1/2in. 50ft. MTNHRM550 Air, Water, Heavy Oil 2,500 PSI 1/2in. 50ft.

Grease Hose Reels• All Brass Main Shaft & Swivel• 5-1/4in. W & 14-7/8in. Dia.• Owner Serviceable• Cartridge Style Spring• Fully Closed Bead• Excellent for off-road truckmounted applications

• One Year Warranty

Hose Working BurstPart Number Type Hose ID Length Pressure PressureMTN663825B Blue Vinyl 3/8 in. 25 ft. 300 PSI 1,200 PSIMTN663825O Orange Vinyl 3/8 in. 25 ft. 300 PSI 1,200 PSIMTN663825R Red Vinyl 3/8 in. 25 ft. 300 PSI 1,200 PSI

Premium PVC Hoses• 300 PSI working pressure• 1200 PSI burst pressure• Includes Vinyl Guard Bend Restrictors on Each End • 2 year over the counter replacement warranty

Hose Working BurstPart Number Type Hose ID Length Pressure PressureMTN663850B Blue Vinyl 3/8 in. 50 ft. 300 PSI 1,200 PSIMTN663850O Orange Vinyl 3/8 in. 50 ft. 300 PSI 1,200 PSIMTN663850R Red Vinyl 3/8 in. 50 ft. 300 PSI 1,200 PSI

Hose Working Burst

Part Number Type Hose ID Length Pressure Pressure

MTN633825RJ Rubber 3/8 in. 25 ft. 300 PSI 1,200 PSI






The Famous Mongoose Hoses!• Includes vinyl guard band restrictors on each end

• 2 Year over the counter replacement warranty

MTN63751/4" x 12' Yellow Nylon Coil Hose• Reusable male swivel fittings on both ends• Fittings are 1/4" thread• Male swivel fittings include a spring guard on both ends• Yellow coil hose stores easily and is easy to find in the shop• Brass fittings on both ends

Extreme Flex Air Hoses• Specially formulated thermoplastic compounds provideextreme flexibility in severe cold temperatures

• Hose features the light weight of PVC and durability ofrubber without cold temperature stiffness for easy handling

• Highly abrasion resistant, non marking cover• Stronger wall and tighter fabric reinforcement improve hosekink resistance and working/burst pressures withoutsacrificing flexibility

• Temperature: -40 to 150 degrees• Coupled 1/4" MPT with bend restrictors at both ends MTN91009410 - 3/8” x 50' MTN91009409 - 3/8” x 25'

300 lb. Red Rubber Air Hoses1/4" MxM Coupled• Multi purpose, heavy duty service hose• Reinforced red rubber hose for durability and kink resistance

• Black vinyl bend restrictors on each end for longer hose life by couplings

• Abrasion and ozone resistantMTN91003998 - 3/8” x 25' MTN91003999 - 3/8” x 50'

M x F Whip Hoses• Four spiral reinforced red rubber with machined brass end fittings

• 300 PSI working pressure• Vinyl guard bend restrictors on each end• 360o swivel endMTN6224 - 1/4in. ID x 1/4in. NDT x 24in.

MTN6260 - 1/4in. ID x 1/4in. NDT x 60in.




Variable Flow Trigger Blow Guns with Removable Rubber Tip• New, improved valve design makes this blow gun more convenient, faster, and easier to use for all applications

• Comfortable lever control and insulated handle• Ergonomic grip• High impact plastic body with built-in hanger slot• Angled nozzle easily gets into tight places• Brass air inlet• Air Inlet Thread NPT: 1/4”• Air Pressure: 90 - 120psi• Temperature Range: -40 degrees to 80 degrees CMTN9304 - 4" MTN9313 - 13" MTN9320 - 20”

MTN976224" Deluxe with /90° Angled Nozzle Blow Gun• Excellent for cleaning moldings or delicate surfaces where a metal tip might scratch or harm critical areas

• Includes OSHA approved tip

MTN2510Mini Grease Gun• 3,500 PSI maximum pressure• Uses standard 3 oz. cartridge (not included)• Chrome external end caps• 6 in. chrome metal spout with jaw ball check coupler

MTN2525Heavy Duty Lever Action Grease Gun• Rugged die cast head• 14 oz. cartridge capacity - 16 oz. bulk• 10,000 PSI max. pressure• Heavy duty heat treated spring for consistant priming• Plunger rod lock for easy loading• Air bleed valve helps priming• 4 in. straight metal spout with 4 jaw HD coupler

Yellow Nylon Recoil Air Hoses plus Tails• Reuseable 1/4" MNPT swivel fitting, to allow field repair ormodification of hose length for application

• Wire spring guards to extend life of hose at coupling ends• Fittings come with thread sealant applied, no teflon taperequired for your convenience

• Tails at each end allow for comfort and ease during use• Coil retracts for easy storage of hose, keeping work area uncluttered

• 200 PSI working pressure

MTN91009408 - 3/8” x 25' MTN91009407 - 1/4” x 25'

Blue Reinforced Poly Urethane Re-Coil Air Hoses• Coil retracts for easy storage of hose, keeping work area uncluttered

• 6” pigtail on male swivel connection end, 18” pigtail on male solid tool end

• Tails on tool and connection end for comfort and ease when using

• 1/4" MPT M x MS reusable ends, allows for fieldrepair or modification of hose length for application

• 200 PSI working pressure

MTN91009405 - 3/8” x 25' MTN91009404 - 3/8” x 12'

Shop equipment

MTNBLOWKIT14 Piece Blow Gun Kit• Composite body blow gun• 5 piece stainless steel needles• Blow gun with 1/8" NPT brass inlet• 12" extension tube• Durable blow mold case

Shop equipment


MTN7100General Use Heat Gun• Designed to combine high performance with exceptional value

• The UltraHEAT™ heat gun features a specifically designed heating element tested at over twice the useful life of competitive models and an impact resistant housing to ensure durability

• Lightweight and easy to use, UltraHEAT™ offers quick heat-up and ultra quiet operation

• A variety of accessories make UltraHEAT™ extremely versatile and a great value for most intermittent applications

Specifications:• Temperature settings: 600ºF and 900ºF• Output: powerful 1,300 watts• Voltage: 120v / 60hz• Certifications: UL and C-UL listed• Fully double insulated for safety

MTN7110Heat Gun Kit• Variable temperature• 500 hour rating• 120 degrees to 1000 degrees temperature• Ceramic heating unit• Blow molded carrying case

39mm reflector nozzle and 75mm spreader nozzle. UL/CUL registered.

MTN340436" Creeper with 4 Casters• Powder coated black frame• Frame dimensions: 36 in. x 17 in. x 3-1/2 in.• Caster size: 2-1/2 in.• Cushioned black vinyl cover

MTN881122AH 12V Battery Jump Booster Pack• Built-In Work/Emergency Light• 1650 peak amps built in battery charger• Rubber-Insulated heavy duty 800AMP Booster Clamps• Heavy duty impact-resistant polyethylene case• Charging Level/Battery Condition indicator gauge

12 Volt DC Output socket with Over-Load Protection. Heavy duty industrial grade 4 gauge all copper cable leads.

whIleSupplIeS

laSt

whIleSupplIeS

laStMTN8801A12 Volt Battery Jump Booster Pack with Air Compressor• Includes built-in air compressor• Built-in work/emergency light• 1700 peak amps, 445 cold cranking amps built in battery charger• Rubber-insulated heavy duty 800AMP booster clamps• Heavy duty impact-resistant polyethylene case

Other features include: charging level/battery condition indicator gauge;12 volt DC output socket with over-load protection; and heavy dutyindustrial grade 4 gauge all copper cable leads.


Shop equipment

MTNMIG6120120-Amp Commercial Portable (115-Volt) MIG Welder• Gas (MIG) and no gas (flux cored) capable with 4step output power

• Welds from 24 gauge to 3/16" MIG and to 1/4"flux-cored wire .023" - .035" diameter

• Adjustable wire speed 50-300 IPM with 4 stepoutput power

Package includes TW1-M torch 8.5', work clamp,adjustable gas regulator, mild steel .030" wire, mask,chipper hammer and operator manual.

For warranty information please visit:http://nu-tecsys.com/MountainWarranty.html

MTNMIG6160160-Amp Commercial Portable (230-Volt) MIG Welder• Gas (MIG) and no gas (flux cored) capable with 4 step output power

• Welds from 24 gauge to 1/4" MIG and to 5/16" flux-cored wire .023" - .035" diameter

• Adjustable wire speed 50-300 IPM with 4 step output power

Package includes TW1-M torch 8.5', work clamp, adjustable gas regulator,mild steel .030" wire, mask, chipper hammer and operator manual.


MTNMIG6226225-Amp Commercial Shop (230-Volt) MIG Welder• Full size with cylinder shelf and 10 step output power• Welds from 22 gauge to 1/2" in a single pass with .023"-.045" diameter wire

• Spool gun ready with toggle switch and plug for MTNWESGUN

Features spool gun drive control and toggle selectionswitch standard. Package includes full-sized power sourcewith cylinder support, HD front casters and solid axle.Includes: TW2 style 250-amp torch 12', work clamp, dual-gauge gas regulator, 10# spool .030" mild steel wire, 5-contact tips and operator manual.


www.toolweb.com/products/MTNMIG6226



Shop equipment


MTNTIG6155155-Amp DC Inverter Portable (230-Volt) TIG Welding System• Welds mild, stainless and chrome moly steels from 28 gauge to 3/16" with AR/CO2 shield gas

• Infinitely adjustable output power 5-155 amps allowsprecise control on all material thicknesses

• Compact 17V torch with 12.5' dinse connect flex-cable for fatigue free operation in tight areas

Portable professional 155-amp dc inverter TIG weldingsystem features infinitely adjustable output from 5-155amps and lift-arc ingnition on 230-volt single phase lineand is capable of welding all steel alloys from 28 gaugeto 3/16". Inverter power supply weighs less than 30 lbs.making this the perfect unit for automotive and lightindustrial applications. Package includes 17V torch andwide jaw clamp with UV/IR dinse connect cables, dualgauge gas regulator and hose, AK-2 torch kit andoperator manual.


MTNPC60163/16" 16 Amp (115-V) Genuine-Cut Inverter Plasma Cutting System• System clean-cuts material to 3/16" and sever-cuts to 7/16"• Status LED indicators for power, low air and over-temp with auto-reset• Built-in adjustable air regulator with ~5 micron filter and air gauge

Portable 3/16" genuine-cut inverter plasma system provides 16 amps ofcutting power on a 115-volt single-phase line and is capable of severing to7/16". Unit features full-wave IGBT inverter with 5-16 amps adjustableoutput, status LED lamps, air filter/dryer with gauge and replaceableelement in air-cooled cabinet weighing less than 25 lbs. Package includesNPT plasma torch, wide-jaw work clamp, spare electrodes and cutting tipsand complete operator manual. Proudly made in U.S.A.


MTNPC60265/16" 26 Amp (230-V) Genuine-Cut Inverter Plasma Cutting System• System clean-cuts material to 5/16" and sever-cuts to 9/16"• Status LED indicators for power, low air and over-temp with auto-reset• Built-in adjustable air regulator with ~5 micron filter and air gauge

Portable 5/16" genuine-cut inverter plasma system provides 26 amps ofcutting power on a 230-volt single-phase line and is capable of severingto 9/16". Unit features full-wave IGBT inverter with 5-26 amps adjustableoutput, status LED lamps, air filter/dryer with gauge and replaceableelement in air-cooled cabinet weighing less than 25 lbs. Packageincludes NPT plasma torch, wide-jaw work clamp, spare electrodes andcutting tips and complete operator manual. Proudly made in U.S.A.


www.toolweb.com/products/MTNPC6026

www.toolweb.com/products/MTNPC6016

www.toolweb.com/products/MTNTIG6155

Shop equipment


MTNWEPAF-M26Plasma Air Filter Canister with Element (M-26)• .01 micron element• High flow rate: 2,700 CFH or 45 CFM of compressed air to 99% moisture free

• Die-cast aluminum air filter canister with wall mounting bracket and 1/4" NPT ports

• Screw-off split canister with O-ring seal for quick change and no leaks

• Replacement element M-723 weighs less than 2 lbs. and installs in minutes

This canister air filter/dryer is the most versatile high volumedryer for shop air. The wall mounted unit traps damagingparticles as small as .01 microns and moisture to 99% and,with the split case design and base mounted 1/4"-NPT ports,the replaceable element may be changed in minutes. This isthe one for plasma cutters or any shop tool where clean dryair is a must.


MTNWEPAF-M723Plasma Air Filter Canister Element (M-723)• High volume air filter replacement element• Provides high flow rate: 2,700 CFH or 45 CFM ofcompressed air to 99% moisture free

• Modular rolled paper unit traps contaminates to .01 microns• Compact 4" diameter by 8" tall element in air-sealed package• Weighs less than 2 lbs. when clean but can trap 2x weight in water

This canister air filter/dryer replacement element fits the most versitile highvolume, wall mounted dryer trapping damaging particles as small as .01microns and moisture to 99%. The element may be installed in minutes.Designed for MNTWEPAF-M26 canister.


MTNHROXY250Oxy-Acetylene Hose Reel• 1/4in. twin oxygen/acetylene• 50ft. hose reel• Safety swivel design to prevent mixingof gases in the event of an O-ring failure

• Safety-banded drive spring• Beaded edges on spool prevents hosedamage or injury to operator

• 8 Position guide arm• Operating pressure: 200 PSI• One year warranty

MTNWESGUN180 Amp MIG Spool Gun with 20’ TW-Connect Cable• Features TW-direct connect machine cable for quick install• Compact direct-drive wire feed with covered spool holder• Replaceable drive rolls for .023" - .035" diameter welding wire

• Designed for MIG aluminum, mild steel and stainless steel wires

• Extended 20' plug-in coaxial cable provides power, control and shield gas to gun

Compact MIG spool gun with direct wire-feed drive andenclosed wire spool holder smoothly feeds even smalldiameter aluminum wire to weld surface at a distance of 20feet from the power supply. Direct connect coaxial cableinsure simple installation while providing power, control andshield gas to weld. Compact design welds in tight spots and,after unplugging from machine, can be securely stored intool box draw.


MTNWEPCK40Plasma Torch Circle Cutting Kit - NPT40 Torch• Chrome plated steel circle cutting kit in low profile storage case• Features magnet, pin point and through-hole center posts• Snap fit wheeled carriage secures torch for 90 degree clean cut• Dual pivot rods 10" and 17" for maximum flexibility in circle sizes• Low profile clam shell carrying / storage case secures in tool drawer

Professional's tool for making perfect circles with your plasma cutter. You'll be surprised how easy it is to cut perfect circles, every time! Simply rest the plasma torch head in the wheeled carriage, set the distancefrom the centering point, roll the torch in a perfect circle. Includes wheeledtorch carriage, three centering points (magnetic, contact-point andthrough-hole) and two distance rods at 10" (250mm)and 17" (440mm)packed in a sturdy storage case.


www.toolweb.com/products/MTNWEPCK40

www.toolweb.com/products/MTNWESGUN

www.toolweb.com/products/MTNWEPAF-M723

www.toolweb.com/products/MTNWEPAF-M26

Shop equipment


MTNWE6900MIG Nozzle Reamer Tool• Hand held nozzle reaming tool to remove weld spatter• Ergonomic sure-grip handle for ease of use• Hardened steel knife blades remove spatter from inner bore of nozzle• Adjustable blades clean nozzles from 3/8" to 3/4" bore

Handy welding nozzle cleaning tool. Just insert the hardened steel blades into a spatter clogged torch nozzle and twist.The blades cut away the built up spatter inside the nozzle helping to prolong life and providing even shield gas distributionfor superior quality welds. After reaming apply anti-spatter spray or gel.

For warranty information please visit: http://nu-tecsys.com/MountainWarranty.html

MTNWE6901MIG Welder's Pliers• Multi purpose pliers designed for the professional welder• Hardened steel construction with sure-grip ergonomic handles• 1-3/4" extended bird-beak outer jaws clean spatter from inner bore of nozzle

• Cylindrical mid-jaws for clamping over larger O.D. nozzles or smaller O.D. contact tip

• Wire cutter "dike" inner jaws for clean cutting hard stainless welding wire


Welding Tool Positioning Magnets• Welding positioning magnet holds ferrousmetal parts in place prior to weld

• Unique shape provides alignment of weldsurfaces at 45, 90, 135 and 180 degrees

• Riveted epoxy coated steel outer plates protect magnetic surfaces from spatter

• Secures parts for accurate welding, brazing, cutting, marking and light lifting


MTNWE6903 - 3" (#25 Load)• Three sided 3" magnetic planes with 25 lbs. of holding power



MTNWEASG-16Welding Anti-Spatter Gel, 16 oz.• Convenient 3-1/2" gel- dip - jar allows easy dip applicationof anti-spatter to MIG gun nozzle

• Superior non-solvent solution prevents weld spatter build-up on nozzle and contact tips

• Environmentally friendly, paint compatible and easily removed with water rinse

• Contains no chlorinated solvents, fluorocarbons, silicones or hydrocarbon compounds

• Non-flammable, non-toxic and biodegradable / non hazardous class 55


MTNWEASS-16Welding Anti-Spatter Spray, 16 oz.• Convenient 16 oz. aerosol spray can easily applies anti-spatter to MIG gun nozzle

• Superior non-solvent solution prevents weld spatter build up on nozzle and contact tips

• Environmentally friendly, paint compatible and easily removed with water rinse

• Contains no chlorinated solvents, fluorocarbons, silicones or hydrocarbon compounds

• Non-flammable, non-toxic and biodegradable / non hazardous class 55


MTNWEPAF-D13Disposable Plasma Air Filter (M-13)• Lightweight in-line disposable plasma air filter with 1/4" NPTF threads

• Removes oil aerosols, condensed moisture to 99% and particulates

• Compact machine filter provides flow rate: 1,800 CFH at 100 PSI maximum• One piece ABS plastic body is rated to 175 degrees F.• Perfect for individual plasma cutters or any tool requiring clean dry air

This compact in-line air filter/dryer is perfect for your plasma machine. The line mounted unit traps damaging particles as small as .01 microns andmoisture to 99% and, with standard 1/4"-NPTF ports, it may be justunscrewed from the line and replaced in minutes. This is the one for yourportable plasma cutting machine or hand tool where clean dry air is a must.


MTNWEGFLOWWelding Gas Regulator Torch Head Flow Checker• Hand held site - tube mounts over welding nozzle for accurate reading at weld surface

• ABS plastic vertical site tube, steel ball and rubber input grommet construction

• Vertical 5" clear site- tube with 10-50 CFH and 5-25 L/MIN flow rate indication

• 1.5" diameter internal tapered rubber input boot fits securely over torch nozzle

• Simple system works on MIG, TIG and plasma torches


www.toolweb.com/products/MTNWEGFLOW

www.toolweb.com/products/MTNWEPAF-D13

www.toolweb.com/products/MTNWEASS-16

www.toolweb.com/products/MTNWEASG-16

www.toolweb.com/products/MTNWE6905





Shop equipment


MTNWEGR-2H2-Gauge CGA580 Welding Gas Regulator and 10' Hose• Shield gas regulator with flow and cylinder gauges CGA580 x 10' hose with 5/8"-18RH fittings

• Solid brass body with VGA580 cylinder tank input and 10' hose 5/8"-18RH B-nipple fittings

• Vertical site - tube with 10-50 CFH and 5-25 L/Min Argon indication

• 1.5" tank volume gauge with 0-3000 PSI and 0-250 Bar indication

• Package includes 1/4" (6mm) reinforced gas hose with B-nipple brass fittings

• Perfect flow and volume gauge for 100% Argon(Aluminum) MIG or TIG welding applications.


MTNWECGA58055CF Welding Gas Cylinder with CGA580-F Valve• Steel cylinder for CO2 / Argon Gas with CGA580 female valve

• Green 55CF volume UC15# cylinder with 1800 fill and 3000 max. PSI rating

• Cast rotary knob shut-off valve with female CGA580 outlet

• Cylinder is 23" tall x 6.75" diameter and weighs 28 lbs. empty

• Shipped empty (DOT restrictions) fill at a local welding retailer

This is the perfect tank for use with portable machine cart as it holds more gas than a small 40CF tank but doesn't tip the cart like a 125CF bottle. This 55CF cylinder is fill pressure rated to 1800 psi (3000 max.) and comes complete with CGA580-F shut off valve. Why pay a rental fee when you can own your own cylinder. Just fill at local gas retailer and never be billed again.


Welding Wire

MTNWEGR-22 Gauge CGA580 Welding Gas Regulator with 5/8"-18RH Fittings• Shield gas regulator with flow and tank volume gauges and CGA580 x 5/8"-18RH connection

• Solid brass body with CGA580 cylinder tank input and 5/8"-18RH B-nipple output

• Large 2" flow gauge with 10-50 CFH and 5-25 L/MIN indication• Large 2" tank volume gauge with 0-3400 PSI and 0-250 Bar Indication• Rated to 3400 Max. PSI cylinder and provides 27 PSI output

Has auto safety relief valve and rotary flow rate adjustment knob. Perfectflow and volume gauge for MIG or TIG welding shield gas cylinders.


Part Number Wire Type Wire Diameter Spool Size Weight Welding Amps Material ThicknessMTNWEW-6210 Mild Steel ER70S-6 .023“ (0.6mm) 4 Inch Spool 2 lb. 35 - 70 #22 - #18MTNWEW-6215 Mild Steel ER70S-6 .030“ (0.8mm) 4 Inch Spool 2 lb. 50 - 100 #22 - 1/8”MTNWEW-6220 Mild Steel ER70S-6 .035“ (0.9mm) 4 Inch Spool 2 lb. 100 - 150 #18 - 1/4”MTNWEW-6211 Mild Steel ER70S-6 .023“ (0.6mm) 8 Inch Spool 11 lb. 35 - 70 #22 - #18MTNWEW-6216 Mild Steel ER70S-6 .030“ (0.8mm) 8 Inch Spool 11 lb. 50 - 100 #22 - 1/8”MTNWEW-6221 Mild Steel ER70S-6 .035“ (0.9mm) 8 Inch Spool 11 lb. 100 - 150 #18 - 1/4”MTNWEW-6230 Flux-Cored E71T-GS .030“ (0.8mm) 4 Inch Spool 2 lb. 40 - 100 #20 - #14MTNWEW-6235 Flux-Cored E71T-GS .035“ (0.9mm) 4 Inch Spool 2 lb. 100 - 130 #18 - 3/16”MTNWEW-6231 Flux-Cored E71T-GS .030“ (0.8mm) 8 Inch Spool 11 lb. 40 - 100 #20 - #14MTNWEW-6236 Flux-Cored E71T-GS .035“ (0.9mm) 8 Inch Spool 11 lb. 100 - 130 #18 - 3/16”MTNWEW-6245 Stainless ER308 .030“ (0.8mm) 4 Inch Spool 2 lb. 50 - 100 #22 - 1/8”MTNWEW-6240 Aluminum ER5356 .030“ (0.8mm) 4 Inch Spool 1 lb. 60 - 100 #22 - 3/16”MTNWEW-6241 Aluminum ER5356 .035“ (0.9mm) 4 Inch Spool 1 lb. 100 - 160 #18 - 5/16”MTNWEW-6445 Aluminum ER5356 .035“ (0.9mm) 4 Inch Spool 3 lb. 100 - 160 #18 - 5/16”

MTNWEGR-11 Gauge CGA580 Welding Gas Regulator and 1/4" Barb• Shield gas AR/CO2 regulator with flow gauge and CGA580 x 1/4" Barb connection

• Solid brass body with CGA580 cylinder tank input and 1/4" (6mm) hose barb output

• Large 2" diameter flow gauge with 10-50 CFH and 5-25 L/MIN indication

• Features rotary adjustment knob and auto safety relief valve

• Rated to 3000 max. PSI cylinder and provides 27 PSI output

Single 2" diameter flow gauge has dual scale 10-50 CFHand 5-25 L/M reading. Perfect flow gauge for MIG or TIGwelding shield gas cylinders.


www.toolweb.com/products/MTNWEGR-1

www.toolweb.com/products/MTNWEW-6445














www.toolweb.com/products/MTNWEGR-2

www.toolweb.com/products/MTNWECGA580

www.toolweb.com/products/MTNWEGR-2H

air conditioning tools


MTN8220R134a Aluminum Block Manifold Gauge Set with Hoses and Quick Couplers• Aluminum block design with sight glass• 72 inch Hoses and 90 degree couplers for fastand easy connections

• Professional quality• Anti-Flutter design gauges with PSI and Fahrenheit scales• Additional access port R134a Aluminum block manifold set with 72" hoses and 90 degree quickcouplers. Professional quality anti-flutter gauges with easy to read dialsthat include PSI and Fahrenheit scale. Easy calibration of gauges helpsmaintain accurate readings.

MTN84045 CFM Vacuum Pump• Heavy duty construction• Handle exhaust• Fast cycle time• Ultimate vacuum 25 microns• Manifold valve isolates pump from the system when testing for leaks

3 Inlet port sizes: 1/4 in., 3/8 in. SAE and 1/2 in. ACME. Gas ballast valvehelps prevent oil contamination. Internal check valve on pump accessfitting prevents oil blowout. Easy access oil fill port. 1/3 HP 110 volt motor.Shipping weight: 38 lbs. Oil capacity: 8 oz.

Single Stage Deep Vacuum Pump• High Performance 3.0 single stage deep vacuum pump

• Internal check valve to prevent escape of liquid oil• Gas ballast prevents oil contamination with dual ports for R-12 and 134A

• Ultimate vacuum of 75 microns• High volume cooling fan provides cool air to motor and pump

Single stage deep vacuum pump with internal check valve to stopoil blowout. Thermally protected motor with On/Off rocker switch.MTN8406 - 3.0 cfmMTN8407 - 6.0 cfm

MTN82103 Piece R12 60" Hose Set• 750 PSI working pressure / burst 3000 PSI

• (1) 60" yellow• (1) 60" red• (1) 60" blue• 1/4" SAE end x 1/4" SAE end

MTN8405Air Vacuum Pump• 1/2 in. ACME and 1/4 in. FL fittings• Fast operation • Venturi type• Requires 90 lb. PSI shop air to operate• No moving parts or oil required• 1.3 cfm air displacement• Achieves 29 in. of vacuum

MTNPAT7066 Piece A/C Line Quick Fix Rethreading Kit• Special recess taps allow users to access previously inaccessible internal threads found on most A/C systems, as well as many other difficult applications.

Also may be used for:• Fuel systems • Transmission lines • Radiators• Coolant lines • Brake lines • And many other applicationsWARNING: NOT FOR USE WITH ANY AIR TOOL

MTNPAT188 Piece A/C Line Quick Fix Rethreading Kit

MTN8204BR134A Aluminum Manifold Gauge with 72” Hose Set & Manual Couplers • Hose fittings 1/4” FFL x 1/2” ACME• Yellow Hose has Quick Seal Fitting• 1 Year Warranty• Red, Yellow and Blue hoses• Site glass manifold• Hose length: 72”• Manual Coupler• Includes a Can Tap, Valve Core Tool, Thermometer• Comes in a Blow Molded Case

MTN8205R134A Brass ManifoldGauge Set with Couplers• Brass manifold body• Automatic style couplers• 60 in. yellow hose, 60 in. blue hoseand 60 in. red hose

• 1 year warranty

MTN8272R134a 72" Standard R134a Charging Hose Set• 72" Hoses• Standard Red, Yellow and Blue hoses• Heavy Duty Brass fittings• Set of 3 World wide Charging Hose with 3000 PSI Burst /600 PSI Max W.P.

• Convenient length with 1/2 inch couplers

This Standard Hose Set includes one each red, yellow andblue 72" hose. 1/2 ACME x 14mm x 1/5 - Red and Blue.1/2 ACME x 1/2 ACME - Yellow hose with anti-blowback.



MTN8402Flush Kit• Manual shut off valve• Neoprene O-ring seals• 1/4 NPT female thread• Aluminum body

MTN8200R12 - R134a ConversionManual Style Coupler Set• 1/4 FL Male fitting• Manual depressor style• Easy grip knob• 8 ball coupler• Includes tank adapter

Replacement SideManifold Gauge• 1/4 in. NPT thread• Dampened needle• CalibrateableMTN8202 - High Low MTN8203 - Low

MTN8201R12 - R134A Conversion Quick Connect Coupler Set• Snap lock coupler • Knurled grip ring• 1/4 in. male flare • 8 ball style coupler• Includes tank adapter

MTN8300AC Condenser Fin Comb• Fine tooth• Sure-grip handle• Multiple fin counts

MTN8401Top Style Metal Can Tap • Heavy duty metal• Large rotary knob• Heavy duty seals

MTN252225Infrared Thermometer -76 to 1560 F• Ranges from -76 to 1560 F• 12 to1 distance to spot ratio• Laser targeting for accurate temperature readings• Thermo-coupler plug• Rugged ABS blow molded design

Infrared thermometer ranges from -76 to 1560 F with12 to 1 distance to spot ratio. Laser targeting foraccurate temperature readings. Thermo-coupler plug,rugged ABS blow molded design for years of reliableuse. Packaged in heavy duty clam shell.

MTN252219Infrared Thermometer -31 to 689 F• Ranges from -31 to 689 F• 8 to 1 distance to spot ratio• Laser targeting• Rugged ABS blow molded plastic design• Packaged in heavy duty clam shellInfrared thermometer ranges from -31 to 689 Fwith 8 to 1 distance to spot ratio. Laser targetingfor accurate temperature readings. Rugged ABSblow molded design for years of reliable use,packaged in heavy duty clam shell.

MTN8207Mountain Dial Thermometer (10 Pack)• Easy to read Face with 2 degree increments• Perfect size for use in air conditioning work• Includes pocket holder and clip for convenience• Small enough to fit into a pocket or store in a tool box• Can be used to measure water temperatures

This Dial Thermometer is designed for convenience. It's small, but accuratewhen it comes to measuring the temperature range 0 degrees to 220degrees Fahrenheit. Its 1" face with magnifying lens makes it easy to read.10 Dial Thermometers in a pack.

MTN8208Mountain Digital Thermometer (3 Pack)• LCD window that displays the temperature• Push On / Off button and Auto Shutoff• Thermometer includes battery• -58 degrees to +392 degrees Fahrenheit or Celsius readings• Includes pocket holder with clip

Digital Thermometer for fast, easy, and accurate temperature measurement.Digital thermometer is accurate within 2 degrees Fahrenheit plus or minus.

MTN84003 Pack Adapter Set• Brass construction• 1/2 in. ACME Male x 1/4 in. Flare Female



MTN5000Big Chill XXL Blower (1,200CFM)• Great for larger jobs & open workspaces• Moves 1,200CFM of air up to 30 feet away• 3-speed switch allows user to adjust air speed• Two grounded convenience outlets with overcurrent protection for simultaneous use with other power tools & accessories

• 4-position adjustment for concentrated air flow & fast drying

• Built-in carrying handle & cord wrap for easy mobility

Specifications:• Air movement: 1200CFM• Switch: 3-Speed• CSA approved• Cord: 8.5ft• Wattage: 300W• Power outlet: two grounded, with overload protection

MTN5036DD36" Direct Drive Drum Fan• Two speed direct drive for maximum energy efficiency• 120V/60Hz• Cut-off protection from overheating• Two wheels allow for easy movement around the shop• UL approved

Housing is powder coated with a front and rear rolled formededge for added strength and rigidity. Permanently lubed andsealed ball bearing construction. 3 balanced aluminum bladesfor quiet operation. • 1 year limited warranty.

Power: 469Hi; 416 LowCFM: 11,600 Hi; 10,550 LowRPM: 1086 Hi; 998 Low

MTN5042BD42" Belt Drive Drum Fan• Two speed belt drive fan• 120V/60Hz• Cut-off protection from overheating• Two rubber wheels allow for easy movement around the shop• UL approvedHousing is powder coated with a front and rear rolled formededge for added strength and rigidity. Permanently lubed andsealed ball bearing construction. 4 balanced aluminum bladesfor quiet operation. • 1 year limited warranty.

Power: 631Hi; 509 LowCFM: 14,800 Hi; 11,250 LowRPM: 1082 Hi; 978 Low

BIg chIllXXl Blower

1200 cFM

MTN5200"The Big Chill" Blower• 3 speeds for specific air flow needs• (2) 15 amp outlets• 12 ft. CSA approved 14/3 gauge cord• 310 cubic feet of air flow/minute• F2-15 amp, 3 prong plugs for use asadditional power source CSA approved

• For indoor or outdoor use• Heavy duty, plastic housing

dual angleadJuStMent

41


MTN502020" High Velocity Floor Fan• Orbital adjustment allows fan to tilt up and down and pivot side to side!• Three speed energy efficient PSC motor• 120V/60Hz • Cut-off protection from overheating• OSHA and UL approved

3 balanced aluminum blades for quiet operation. Steel wire fan guard andsteel tubing stand with rubber feet. Durable powder coating finish. • 1 year limited warranty.

Power: 159 Hi; 147 Med; 135 LowCFM: 4230 Hi; 3550 Med; 2995 LowRPM: 1500 Hi; 1385 Med; 1280 Low

MTN502424" Orbital Drum Fan, Vertical and Horizontal Air Flow• Orbital adjustment allows fan to tilt up and down and pivot side to side• Two speed energy efficient motor• 120V/60Hz • Cut-off protection from overheating• OSHA and UL approved

3 balanced aluminum blades for quiet operation. Steel wire fan guard and steeltubing stand with rubber feet. Durable powder coating finish. 2 piece wheels foreasy transportation. • 1 year limited warranty.

Power: 273Hi; 251 LowCFM: 6300 Hi; 4900 LowRPM: 1511 Hi; 1438 Low

MTN503030" Pedestal Fan• 3 speed energy efficient motor• 120V/60Hz• Fan head can tilt, spring loaded post for easy adjustment

• Cut-off protection from overheating• OSHA and UL approved

Tubular steel stand with round base needs onlylimited floor space. Balanced aluminum blades forquiet operation. Steel wire fan guard with blackpowder coating for durable use. 2 small wheelson base provide easy movement. Contemporarystyle, quiet operating fan for home, office,reception area, store and classroom. • 1 Year limited warranty.

Power: 161Hi; 136 Med; 122 LowCFM: 4835 Hi; 3780 Med; 2925 LowRPM: 1116 Hi; 968 Med; 856 Low

dual angleadJuStMent


cutting and threading


MTN55103Mountain Drill Stop Set• Includes drill stops for drills up to a 1/2"• Two sizes cover 1/16" to 1/2, both packaged as a set

MTN556725 Piece Mountain Left Hand Drill Bit Set• Cobalt steel left hand drill bits• 135 Degree Split Point self centers atpoint of contact

• Includes sizes: 1/8", 3/16", 1/4", 5/16" and 3/8" left hand drills.

MTN5549013 Piece Black OxideMountain Drill Set• 135 Degree Split Point, starts cutting at the starting surface

• Includes sizes from 1/16" to 1/4"• For use in hard and soft metals, fiberglass, plastic and wood

• Made from premiumgrade high speed steel

• All contained in a hard case

MTN555547 Piece Mountain Star Drive Bit Set• Star drive insert bit set• For driving common or mild steel screws• Made from premium S2 grade steel• Hardened to reduce wear and tip breakage• 1" insert bits for use with all types of bit holders• Set includes T10-T15, T20, T25, T27 and T30with a magnetic bit holder

MTNXDBS13WH13 Piece High Speed Steel Drill Bit Set• Meets ANSI standards• 118 degree split point tip• 2 times stronger than other drill bits• Bore stainless, chrome, chrome-nickel,silicon-chrome and even armor & plate

• Ideal for many uses including: auto, home, PBE, hobby, and much more

Mountain Slotted Insert Bits• Premium grade S2 steel• 1" insert bits for use with all types of bit holders• For driving common or mild steel screws

MTN55528 - No. 6-8 (2 PK)MTN55529 - No. 8-10MTN55530 - No. 10-12

MTN5569913 Piece Cobalt Mountain Drill Bit Set• Made from premium grade cobalt drill bit set

• 135 degree split point requires no center punching

• For cutting extremely hard metals, including stainless steel

• Includes sizes from 1/16" to 1/4"• All included in a hard case

MTNXDBS29WH 29 Piece High Speed Steel Drill Bits• 118 degree split point tip• 2 times stronger than other drill bits• Meets ANSI standards• Bores stainless; chrome-nickel; silicon-chrome and arbor plate• Ideal for many types of uses

The Mountain (MTNXDBS29WH) is the perfect 29 piece brighthigh speed drill bit set for many types of applications. All drill bitsare 2 times stronger than other drill bits and are the idealcompanion to any tool chest.

MTN5529013 Piece HSS Mountain Drill Bit Set• For use in metal, wood and plastics• 135 degree split point self-centers without theuse of a center punch

• Ground flats on the shank allow for tightchucking, when in keyless applications

• Made from premium grade high speed steel• Includes sizes from 1/16" to 1/4"



Spiral Flute Screw Extractors• Spiral Style premium extractor• Designed to remove screws, bolts and studs• Heat treated and tempered for a longer tool life• Designed for hand cutting applications• Packaged one per card

MTN55560 - #1 • Removes bolts 5/32" to 7/32". Use 7/64" drill. MTN55561 - #2 • Removes bolts 3/32" to 5/32". Use 5/64" drill.MTN55562 - #3 • Removes bolts 7/32" to 9/32". Use 5/32" drill.MTN55563 - #4 • Removes bolts 9/32" to 3/8". Use 1/4" drill.MTN55564 - #5 • Removes bolts 3/8" to 5/8". Use 19/64" drill. MTN55570 - #6 • Removes bolts 5/8" to 7/8". Use 13/32" drill.

Square Flute Screw Extractors• Square Style premium extractor• Designed to remove screws, bolts and studs;works best in thin wall applications

• Heat treated and tempered for a longer tool life• Designed for hand cutting applications• Packaged one per card

MTN55565 - #1 • Removes bolts 3/16" to 5/16". Use 9/64" drill.MTN55566 - #2 • Removes bolts 3/8". Use 3/16" drill. MTN55567 - #3 • Removes bolts 7/16". Use 15/64" drill. MTN55568 - #4 • Removes bolts 1/2" to 9/16". Use 5/16" drill.MTN55569 - #5 • Removes bolts 5/8" to 5/16". Use 3/8" drill.

MTN557174 Piece Mountain Bi-MetalReciprocating Blade Set• Cobalt Bi-metal• Four piece set includes 6T, 14T, 18T,and 24T 6" blades

• Universal 1/2" shank fits all types ofreciprocating saws

MTN553343 Blade Mountain Carbon Set Carded• Economical carbon alloy blade• 12" overall length fits all popular frames• For cutting light metal and wood• Includes one of each 18T, 24T and 32T blades

MTN55691Mountain 3/8" Spot Weld Cutter• Quickly remove spot welds in one easy cut• Double sided cutter included• Always center punch weld area to prevent skipping• Arbor and 3/8" double ended cutter • Made in the USA

MTN55692Mountain 3/8" Replacement Bladesfor Spot Weld Cutter

• Single sided, stubby length for confined areasMTN55693 - 10mmMTN55694 - 6.5mm

Mountain Spot Weld Drill Bits• Made from premium grade cobalt steel• Fully heat treated for a longer tool life• Modified center spur design• Made in the USA

MTN55695 - 8mm

• Double ended for quick changesMTN55696 - 10mm MTN55697 - 6.5mm MTN55698 - 8mm

MTN558805 Piece Hole Saw Kit• Professional grade bi-metal hole saw• Cobalt high speed steel teeth resist heat and wear• Cuts 1-1/2" deep holes• Cut hard and soft metals, nail embedded wood, wood and fiberglass

• Set includes all popular sizes for a mechanic

Kit includes 7/8", 1", 1-1/8", 1-1/4", 1-1/2", one arborand adapter. Cutting depth of 1-1/2". Perfect of useon all types of metal.



MTN6218Automatic Center Punch• No hammer required • Alloy steel point• Knurled steel body • 5" long• .5" diameter

MTN182618" Professional Urethane Cut Out Knife• Extra reach to cut hardened urethane down to the dash line• Heavy duty steel and aluminum construction• Use with standard utility razor blade• Ergonomic cushion grip handle

MTN55103Mountain Drill Stop Set• Includes drill stops for drills up to a 1/2"• Two sizes cover 1/16" to 1/2, both packaged as a set• Lifetime warranty - Does not cover abuse

Mountain Phillips Power Bits• 2" Power lengths for use in quick change adapters or power screw gunsMTN55501 - No. 1 MTN55502 - No. 2

Mountain Power Bits• Premium grade S2 steel• Heat treated to withstand torque and reduce wear• Precision ground tips for maximum grip• For driving common or mild steel screws

Mountain Slotted Power Bits• 2" Power lengths for use in quick change adapters or power screw gunsMTN55503 - No. 6-8 MTN55504 - No. 8-10

Mountain Star Power Bits• 2" Power lengths for use in quick change adapters or power screw gunsMTN55505 - T-15 MTN55507 - T-30MTN55506 - T-25

Mountain Star Insert Bits• 1" Insert bits are for use with all types of bit holdersMTN55508 - T-10MTN55509 - T-15MTN55510 - T-20

MTN55511 - T-25MTN55512 - T-30MTN55513 - T-40

MTN55514Mountain 1/4" Hex Magnetic Bit Holder• 1/4" power shank fits all drivers and quick change adapters• Made from premium grade steel for a longer life• Magnetic insert holds insert bits firmly in place• Holds all types of 1" insert screw-driving bits

Mountain Star Square Drive Bits• Square drive, Star drive bits• Accepts 1/4" square drive• Made from S2 premium grade alloy steel• Not intended for impact wrenches• Heat treated to withstand torque and reduce wearMTN55515 - T-10MTN55516 - T-15MTN55517 - T-20

MTN55518 - T-25MTN55519 - T-27MTN55520 - T-30

Mountain Star Square Drive Bits• Accepts 3/8" square driveMTN55521 - T-40MTN55522 - T-45

MTN55523 - T-50MTN55524 - T-45

Mountain Phillips Screwdriver Bits• Heat treated to withstand torque and reduce wear• Premium grade S2 steel• 1" Insert bits are for use in bit holders• Two bits per packageMTN55525 - No.1MTN55526 - No.2MTN55527 - No.3

MTN5597024 Piece SAE Tap/Die Set• Professional grade Tap• Precision cut threads for consistent, exact threading• Heat treated and tempered for a longer tool life• Designed for hand cutting applications• Includes 24 piece of SAE taps and dies• Lifetime warranty

Set includes Tap wrench, 1" die stock, 1/4-20 NC, 1/4-28 NF, 5/16-18 NC,5/16-24 NF, 3/8-16 NC, 3/8-24 NF, 7/16-14 NC, 7/16-20 NF, 1/2-13 NC,1/2-20 NF, 1/8-27 NPT taps and 1/4-20 NC, 1/4-28 NF, 5/16-18 NC, 5/16-24 NF, 3/8-16 NC,3/8-24 NF, 7/16-14 NC, 7/16-20 NF, 1/2-13 NC, 1/2-20NF, 1/8-27 NPT dies.

Cutoff Wheels• USA made• 25,000 RPM rating

MTN4601-53 in. x 1/16” x 3/8” (5 Pack)

MTN4602-53 in. X 1/32” X 3/8” (5 Pack)

MTN4601-1003 in. x 1/16” x 3/8” (100 Pack)

MTN4602-1003 in. x 1/32” x 3/8” (100 Pack)



40 Piece Tap/Die Sets• Professional grade Tap• Precision cut threads for consistent, exact threading• Heat treated and tempered for a longer tool life• Designed for hand cutting applications• Lifetime warranty

MTN55971 - SAESet includes 0"-1/4" T-handle tap, 1/4"-1/2" T-handle tapwrench, wrench, 0" - 1 adjustable tap wrench, 1"adjustable die stock, pitch gauge, screwdriver, 4-40 NC,6-32 NC, 8-32 NC, 10-24 NC, 10-32 NF, 12-24 NC, 1/4-20NC, 1/4-28 NF, 5/16-18 NC, 5/16-24 NF, 3/8-16 NC, 3/8-24 NF, 7/16-14 NC, 7/16-20 NF, 1/2-13 NC, 1/2-20 NF,1/8-27 NPT taps and 4-40 NC, 6-32 NC, 8-32 NC, 10-24NC, 10-32 NF, 12-24 NC, 1/4-20 NC, 1/4-28 NF, 5/16-18NC, 5/16-24 NF, 3/8-16 NC, 3/8-24 NF, 7/16-14 NC, 7/16-20 NF, 1/2-13 NC, 1/2-20 NF, 1/8-27 NPT dies.

MTN55972 - MetricSet includes 0" - 1/4" T-handle tap, 1/4" - 1/2" T-handletap wrench, 0" - 1" adjustable tap wrench, 1" adjustabledie stock, pitch gauge, screwdriver, 3.0 x 0.60, 4.0 x 0.70,4.0 x 0.75, 5.0 x 0.80, 5.0 x 0.90, 6.0 x 1.00, 7.0 x 1.00, 8.0x 1.00, 8.0 x 1.25, 9.0 x 1.00, 9.0 x 1.25, 10.0 x 1.25, 10.0x 1.50, 11.0 x 1.50, 12.0 x 1.25, 12.0 x 1.50, 12.0 x 1.75taps and 3.0 x 0.60, 4.0 x 0.70, 4.0 x 0.75, 5.0 x 0.80, 5.0 x0.90, 6.0 x 1.00, 7.0 x 1.00, 8.0 x 1.00, 8.0 x 1.25, 9.0 x1.00, 9.0 x 1.25, 10.0 x 1.25, 10.0 x 1.50, 11.0 x 1.50, 12.0x 1.25, 12.0 x 1.50, 12.0 x 1.75 dies.

MTNMS30003 Piece Razor Scraper Kit• Heavy duty ergonomic handles• (1) Palm scraper• Reusable blade holders• (1) 10” scraper• Blow mold case• (1) 6” scraper

MTN84802 in. Coarse Twist and Lock Style Surface Prep Disc• Box of 25• Made in the U.S.A.

MTN84812 in. Medium Surface Disc• 25/box

MTN94853" Coarse Roloc Disc• 25/box

MTN94862" Medium Roloc Disc • 25/box

MTN85392” Surface Prep Holder With 1/4” Shank

MTN85403" Surface Prep Holder with 1/4" Shank

displays


Display Contents / Open StockPart Number ........Description ..............................................QtyMTN55104...........MNT 1/3FL OZ TUBE CUT OIL .................2MTN55604...........MNT 1/16 COBALT DRILL 2PK .................2MTN55605...........MNT 5/64 COBALT DRILL 2PK .................2MTN55606...........MNT 3/32 COBALT DRILL 2PK .................2MTN55607...........MNT 7/64 COBALT DRILL 2PK .................2MTN55608...........MNT 1/8 COBALT DRILL 2PK ..................2MTN55609...........MNT 9/64 COBALT DRILL.........................2MTN55610...........MNT 5/32 COBALT DRILL.........................2MTN55611...........MNT 11/64 COBALT DRILL.......................1MTN55612...........MNT 3/16 COBALT DRILL........................2MTN55613...........MNT 13/64 COBALT DRILL.......................1MTN55614...........MNT 7/32 COBALT DRILL.........................2MTN55615...........MNT 15/64 COBALT DRILL.......................2MTN55616...........1/4 COBALT MOUNTAIN DRILL ...............2

Part Number ........Description ..............................................QtyMTN55617...........MNT 17/64 COBALT DRILL.......................2MTN55618...........MNT 9/32 COBALT DRILL.........................2MTN55619...........MNT 19/64 COBALT DRILL.......................1MTN55620...........MNT 5/16 COBALT DRILL.........................2MTN55621...........MNT 21/64 COBALT DRILL.......................1MTN55622...........MNT 11/32 COBALT DRILL.......................2MTN55623...........MNT 23/64 COBALT DRILL.......................1MTN55624...........3/8 COBALT MOUNTAIN DRILL ...............2MTN55625...........MNT 25/64 COBALT DRILL.......................1MTN55626...........MNT 13/32 COBALT DRILL.......................2MTN55627...........MNT 27/64 COBALT DRILL.......................1MTN55628...........MNT 7/16 COBALT DRILL.........................2MTN55629...........MNT 29/64 COBALT DRILL.......................1MTN55630...........15/32 COBALT MOUNTAIN DRI...............2MTN55631...........MNT 31/64 COBALT DRILL.......................1MTN55632...........1/2 COBALT MOUNTAIN DRILL ...............2

MTN5560051 Piece Mountain Cobalt Drill Bit Display• Display contains fifty one Cobalt drill bits• Premium M45 steel for drilling extremely hard materials such as stainless steel• 135 degree split point will not walk or wander• Cutting oil included with display• Display contains a three tier rack with signage51 piece Cobalt drill bit display offers all the popular sizes from 1/4" to 1/2" in jobber length. All drills arestraight shank. Made from premium M45 Cobalt steel to withstand high temperatures for a long tool life.

displays


MTN5520046 Pieces Mountain High Speed Steel Drill Bit Display• High Speed Steel drill display contains forty six accessories• 135 degree split point will not walk or wander at the starting surface• Drill sizes larger than 25/64" are 3/8" reduced shank• Display includes drill stops, center punch and drill saw• Two tier rack and signage included with purchase

Additional accessories included with the display are drill stops, drill saw and a center punch.

MTN5540066 Piece Mountain Black Oxide Drill Bit Display• 135 degree split point will not walk or wander at the starting surface• Black Oxide surface treatment adds lubricity and helps ward off heat• 25/64" to 1/2" diameters have 3/8" reduced shanks• Display ships complete with three tier rack and signage

Display Contents / Open StockPart Number ........Description ..............................................QtyMTN55404...........MNT 1/16 BLKOXD DRILL 2PK.................4MTN55405...........MNT 5/64 BLKOXD DRILL 2PK.................2MTN55406...........MNT 3/32 BLKOXD DRILL 2PK.................2MTN55407...........MNT 7/64 BLKOXD DRILL 2PK.................2MTN55408...........MNT 1/8 BLKOXD DRILL 2PK...................4MTN55409...........MNT 9/64 BLKOXD DRILL ........................2MTN55411...........MNT 11/64 BLKOXD DRILL ......................2MTN55412...........MNT 3/16 BLKOXD DRILL ........................2MTN55413...........MNT 13/64 BLKOXD DRILL ......................2MTN55414...........MNT 7/32 BLKOXD DRILL ........................2MTN55415...........MNT 15/64 BLKOXD DRILL ......................2MTN55416...........MNT 1/4 BLKOXD DRILL ..........................4MTN55417...........MNT 17/64 BLKOXD DRILL ......................2MTN55418...........MNT 9/32 BLKOXD DRILL ........................2MTN55419...........MNT 19/64 BLKOXD DRILL ......................2MTN55420...........MNT 5/16 BLKOXD DRILL ........................2MTN55421...........MNT 21/64 BLKOXD DRILL ......................2MTN55422...........MNT 11/32 BLKOXD DRILL ......................2MTN55423...........MNT 23/64 BLKOXD DRILL ......................2MTN55424...........MNT 3/8 BLKOXD DRILL ..........................2MTN55425...........MNT 25/64 BLKOXD DRILL ......................2MTN55426...........MNT 13/32 BLKOXD DRILL ......................2MTN55427...........MNT 27/64 BLKOXD DRILL ......................2MTN55428...........MNT 7/16 BLKOXD DRILL .......................2MTN55429...........MNT 29/64 BLKOXD DRILL ......................2MTN55430...........15/32 BLK OXD MOUNTAIN DR ..............2MTN55431...........MNT 31/64 BLKOXD DRILL ......................2MTN55432...........MNT 1/2 BLKOXD DRILL ........................2MTN55433...........1/8in. MOUNTAIN DE DRILL 2 .................2

Display Contents / Open StockPart Number ........Description ..............................................QtyMTN55101...........1/4in. MOUNTAIN DRILL SAW .................3MTN55102...........1/16in. MOUNTAIN CNTR PUNCH ..........3MTN55103...........MOUNTAIN DRILL STOP SET ..................2MTN55204...........1/16 HSS MOUNTAIN DRL 2PK................3MTN55205...........MNT 5/64 HSS DRILL 2 PK........................2MTN55206...........MNT 3/32 HSS DRILL 2 PK........................2MTN55208...........MNT 1/8 HSS DRILL 2 PK..........................4MTN55210...........5/32 HSS MOUNTAIN DRILL ....................2MTN55212...........3/16 HSS MOUNTAIN DRILL ...................2MTN55214...........7/32 HSS MOUNTAIN DRILL ...................2MTN55216...........1/4 HSS MOUNTAIN DRILL ......................4MTN55218...........9/32 HSS MOUNTAIN DRILL ...................2MTN55220...........5/16 HSS MOUNTAIN DRILL ....................2MTN55222...........11/32 HSS MOUNTAIN DRILL ..................2MTN55224...........3/8 HSS MOUNTAIN DRILL ......................3MTN55226...........13/32 HSS MOUNTAIN DRILL ..................2MTN55228...........7/16 HSS MOUNTAIN DRILL ...................2MTN55230...........15/32 HSS MOUNTAIN DRILL ..................2MTN55232...........1/2 HSS MOUNTAIN DRILL .....................2

displays


MTN55901Mountain 65 Pc Thread Display• Professional grade Taps, dies and screw extractors• Display includes all pupular threading and extracting tools for professional results• Metal rack, labels and signage are included• Tools are for hand applications only• Full carded product

Mountain Thread Display contains 65 pcs of dies, taps and extractors. Ships complete with signage, rack and labels.

Display Contents / Open StockPart Number ........Description ..............................................QtyMTN55560...........#1 SPIRAL MTN SCREW EXT....................3MTN55561...........#2 SPIRAL MTN SCREW EXT....................3MTN55562...........#3 SPIRAL MTN SCREW EXT....................3MTN55563...........#4 SPIRAL MTN SCREW EXT....................3MTN55564...........#5 SPIRAL MTN SCREW EXT....................3MTN55918...........MNT 1/4-20 NC PLUG TAP.......................2MTN55919...........MNT 1/4-28 NF PLUG TAP .......................2MTN55920...........MNT 5/16-18 NC PLUG TAP.....................2MTN55921...........MNT 5/16-24 NF PLUG TAP .....................2MTN55922...........MNT 3/8-16 NC PLUG TAP.......................2MTN55923...........MNT 3/8-24 NF PLUG TAP .......................2MTN55924...........MNT 7/16-14 NC PLUG TAP.....................2MTN55925...........MNT 7/16-20 NF PLUG TAP .....................2MTN55926...........MNT 1/2-13 NC PLUG TAP.......................2MTN55927...........MNT 1/2-20 NF PLUG TAP .......................2

Part Number ........Description ..............................................QtyMTN55928...........MOUNTAIN 1/8-27 NPT TAP ...................2MTN55929...........MOUNTAIN 1/4-18 NPT TAP....................2MTN55951...........MNT 1/4-20 NC HEX DIE.........................2MTN55952...........MNT 1/4-28 NF HEX DIE .........................2MTN55953...........MNT 5/16-18 NC HEX DIE........................2MTN55954...........MNT 5/16-24 NF HEX DIE ........................2MTN55955...........MNT 3/8-16 NC HEX DIE.........................2MTN55956...........MNT 3/8-24 NF HEX DIE .........................2MTN55957...........MNT 7/16-14 NC HEX DIE........................2MTN55958...........MNT 7/16-20 NF HEX DIE ........................2MTN55959...........MNT 1/2-13 NC HEX DIE.........................2MTN55960...........MNT 1/2-20 NF HEX DIE .........................2MTN55961...........MNT 1/8-27 NPT HEX DIE ........................2MTN55962...........MNT 1/4-18 NPT HEX DIE ........................2MTN55969...........MOUNTAIN 14.0X1.25SP TAP ..................2

displays


MTN55902Mountain 32 Pc Extractor Display• Professional grade screw extractors• Includes spiral and square flute extractors• Peghooks, labels and signage are included• Tools are for hand applications only• Full carded product

Mountain Screw Extractor display contains 35 Pcs of spiraland square flute extracters on a extractor set. Displayships complete with peghooks, labels and signage.

MTN5567028 Piece Mountain Left Hand Drill Bit Display• Contains twenty eight of the most popular sizes of left hand drill bits• Each drill bit features a 135 degree split point• Made from premium cobalt steel• Individually carded• Includes peghooks, and display signage• 135 degree split point will not walk or wander at the starting surface

Display Contents / Open StockPart Number ........Description ..............................................QtyMTN55671...........MNT 5/64 LEFT HAND DRILL ...................2MTN55672...........5 PC MOUNTAIN LFT HND SET ...............2MTN55673...........MNT 7/64 LEFT HAND DRILL ...................2MTN55674...........MNT 1/8 LEFT HAND DRILL .....................2MTN55675...........MNT 5/32 LEFT HAND DRILL ...................2MTN55676...........MNT 3/16 LEFT HAND DRILL ...................2MTN55677...........MNT 1/4 LEFT HAND DRILL .....................2MTN55678...........MNT 19/64 LEFT HAND DRILL .................2MTN55679...........MNT 5/16 LEFT HAND DRILL ...................2MTN55680...........MNT 3/8 LEFT HAND DRILL .....................2MTN55681...........MNT 13/32 LEFT HAND DRILL .................2MTN55682...........MNT 7/16 LEFT HAND DRILL ...................2MTN55683...........MNT 15/32 LEFT HAND DRILL .................2MTN55684...........MNT 1/2 LEFT HAND DRILL .....................2

Display Contents / Open StockPart Number ........Description ..............................................QtyMTN55551...........MNT 6PC SPIRAL EXT SET .......................2MTN55560...........#1 SPIRAL MTN SCREW EXT....................3MTN55561...........#2 SPIRAL MTN SCREW EXT....................3MTN55562...........#3 SPIRAL MTN SCREW EXT....................3MTN55563...........#4 SPIRAL MTN SCREW EXT....................3MTN55564...........#5 SPIRAL MTN SCREW EXT....................3MTN55565...........#1 SQUARE MTN SCREW EXT .................3MTN55566...........#2 SQUARE MTN SCREW EXT .................3MTN55567...........#3 SQUARE MTN SCREW EXT .................3MTN55568...........#4 SQUARE MTN SCREW EXT .................3MTN55569...........#5 SQUARE MTN SCREW EXT .................3MTN55570...........#6 SPIRAL MTN SCREW EXT....................3


MTN5591041 Piece Mountain Fractional Tap Display• Made from carbon alloy steel for handthreading applications

• Cutting oil included with display• Display ships with two tier rack and signage

MTN5593040 Piece Mountain Metric Tap Display• Made from carbon alloy steel for hand threading applications• Display ships with two tier rack and signage

displays

Display Contents / Open StockPart Number ........Description ..............................................QtyMTN55104...........MNT 1/3FL OZ TUBE CUT OIL .................3MTN55931...........MNT 3.0X0.50 METRIC TAP......................2MTN55932...........MNT 3.0X0.60 METRIC TAP......................2MTN55933...........MNT 4.0X0.70 METRIC TAP......................2MTN55934...........MNT 4.0X0.75 METRIC TAP......................2MTN55935...........MNT 5.0X0.80 METRIC TAP......................2MTN55936...........MNT 5.0X0.90 METRIC TAP......................2MTN55937...........MNT 6.0X1.00 METRIC TAP......................2MTN55938...........MNT 7.0X1.00 METRIC TAP......................2MTN55939...........MNT 8.0X1.00 METRIC TAP......................2MTN55940...........MNT 8.0X1.25 METRIC TAP......................2MTN55941...........MNT 9.0X1.00 METRIC TAP......................2MTN55942...........MNT 9.0X1.25 METRIC TAP......................2MTN55943...........MNT 10.0X1.25 METRIC TAP....................2MTN55944...........MNT 10.0X1.50 METRIC TAP....................2MTN55945...........MNT 11.0X1.50 METRIC TAP....................2MTN55946...........MNT 12.0X1.25 METRIC TAP....................2MTN55947...........MNT 12.0X1.50 METRIC TAP....................2MTN55948...........MNT 12.0X1.75 METRIC TAP....................2MTN55949...........MNT 10.0X1.00 METRIC TAP....................2

Display Contents / Open StockPart Number.........Description......................................QtyMTN55104............MNT 1/3FL OZ TUBE CUT OIL .........3MTN55911............MNT 4-40 NC PLUG TAP..................2MTN55912............MNT 6-32 NC PLUG TAP..................2MTN55913............MNT 8-32 NC PLUG TAP..................2MTN55914............MNT 10-24 NC PLUG TAP................2MTN55915............MNT 10-32 NF PLUG TAP ................2MTN55916............MNT 12-24 NC PLUG TAP................2MTN55917............MNT 14-20 NS PLUG TAP ................2MTN55918............MNT 1/4-20 NC PLUG TAP...............2MTN55919............MNT 1/4-28 NF PLUG TAP ...............2MTN55920............MNT 5/16-18 NC PLUG TAP.............2MTN55921............MNT 5/16-24 NF PLUG TAP .............2MTN55922............MNT 3/8-16 NC PLUG TAP...............2MTN55923............MNT 3/8-24 NF PLUG TAP ...............2MTN55924............MNT 7/16-14 NC PLUG TAP.............2MTN55925............MNT 7/16-20 NF PLUG TAP .............2MTN55926............MNT 1/2-13 NC PLUG TAP...............2MTN55927............MNT 1/2-20 NF PLUG TAP ...............2MTN55928............MOUNTAIN 1/8-27 NPT TAP ...........2MTN55929............MOUNTAIN 1/4-18 NPT TAP............2

displays


MTN5595040 Piece Mountain Metric Die Display• Made from carbon alloy steel for hand threading applications

• Includes pitch gauges for thread measurements• Display contains two tier rack and display signage

MTN5550063 Piece Mountain Screwdriving Bit Display• Display offers sixty three screwdriving accessories• Screwdriving bits made from S2 steel• Includes square drive, star drive bits• Bit holder included with display• Display ships with three tier rack and display signage

63 piece screwdriving bit display offers a full range of phillips,slotted, star drive bits. All bits offer 1/4" hex shanks. Squaredrive bits offer 1/4" to 1/2" drives depending on the size.

Display Contents / Open StockPart Number ........Description ..............................................QtyMTN55105...........MNT 12 BLD US PITCH GAUGE...............2MTN55106...........MNT 12 BLD MET PITCH GAUG ..............2MTN55951...........MNT 1/4-20 NC HEX DIE.........................2MTN55952...........MNT 1/4-28 NF HEX DIE .........................2MTN55953...........MNT 5/16-18 NC HEX DIE........................2MTN55954...........MNT 5/16-24 NF HEX DIE ........................2MTN55955...........MNT 3/8-16 NC HEX DIE.........................2MTN55956...........MNT 3/8-24 NF HEX DIE .........................2MTN55957...........MNT 7/16-14 NC HEX DIE........................2MTN55958...........MNT 7/16-20 NF HEX DIE ........................2MTN55959...........MNT 1/2-13 NC HEX DIE.........................2MTN55960...........MNT 1/2-20 NF HEX DIE .........................2MTN55961...........MNT 1/8-27 NPT HEX DIE ........................2MTN55962...........MNT 1/4-18 NPT HEX DIE ........................2MTN55963...........MNT 5.0X0.80 M HEX DIE ........................2MTN55964...........MNT 6.0X1.00 M HEX DIE ........................2MTN55965...........MNT 8.0X1.25 M HEX DIE ........................2MTN55966...........MNT 10.0X1.25 M HEX DIE ......................2MTN55967...........MNT 10.0X1.50 M HEX DIE ......................2MTN55968...........MNT 12.0X1.25 M HEX DIE ......................2

Display Contents / Open StockPart Number ........Description ..............................................QtyMTN55501...........MNT PHIL #1 POWER BIT.........................2MTN55502...........MNT PHIL #2 POWER BIT.........................3MTN55503...........MNT SLOT 6-8 POWER BIT ......................2MTN55504...........MNT SLOT 8-10 POWER BIT ....................2MTN55505...........MNT STAR T15 POWER BIT......................2MTN55506...........MNT STAR T25 POWER BIT......................2MTN55507...........MNT STAR T30 POWER BIT......................2MTN55508...........MNT STAR T10 INSERT BIT ......................2MTN55509...........MNT STAR T15 INSERT BIT ......................2MTN55510...........MNT STAR T20 INSERT BIT ......................2MTN55511...........MNT STAR T25 INSERT BIT ......................2MTN55512...........MNT STAR T30 INSERT BIT ......................2MTN55513...........MNT STAR T40 INSERT BIT ......................2MTN55514...........MOUNTAIN 1/4in. BIT HOLDER ...............2

Part Number ........Description ..............................................QtyMTN55515...........MNT STAR T-10 SQ-DRIV BIT....................2MTN55516...........MNT STAR T-15 SQ-DRIV BIT....................2MTN55517...........MNT STAR T-20 SQ-DRIV BIT....................2MTN55518...........MNT STAR T-25 SQ-DRIV BIT....................2MTN55519...........MNT STAR T-27 SQ-DRIV BIT....................2MTN55520...........MNT STAR T-30 SQ-DRIV BIT....................2MTN55521...........MNT STAR T-40 SQ-DRIV BIT....................2MTN55522...........MNT STAR T-45 SQ-DRIV BIT....................3MTN55523...........MNT STAR T-50 SQ-DRIV BIT....................2MTN55524...........MNT STAR T-55 SQ-DRIV BIT....................2MTN55525...........MNT PHIL #1 INSERT BT 2PK ...................2MTN55526...........MNT PHIL #2 INSERT BT 2PK ...................3MTN55527...........MNT PHIL #3 INSERT BT 2PK ...................2MTN55528...........MNT SLOT 6-8 INSERT 2PK......................2MTN55529...........MNT SLOT 8-10 INSERT 2PK....................2MTN55530...........MNT SLOT 10-12 INSERT 2PK..................2

displays


MTN5533020 Piece Mountain Carbon Hacksaw Blade Display• Carbon Alloy hacksaw blade display contains 20 blades

• Blades are all 12" in length• Tooth configurations are availablein 18, 24, 32 teeth per inch

• For cutting light metals, plastics and woods

• Display includes all peghooks and signage

MTN5534020 Piece Mountain Cobalt Bi-Hard Hacksaw Blade Display• Cobalt Bi-Hard Hacksaw Display includes twenty blades

• Cobalt Bi-Hard blades are flexible,shatterproof and strong

• Stage hardened for maximum durability and cutting life

• 12" overall length fits all brands of hacksaw frames• Display ships with peghooks and display signage

Includes blades that are 12" long with 18, 24 and 32 teeth per inch.

MTN553803 Piece Hacksaw Frame Display• Hacksaw frame display includes three quality frames• Heavy Duty frame offers a lightweight design and blade storage• General purpose frame allows for both 10"and 12" blade lengths• Display includes peghooks and signage

Display Contents / Open StockPart Number ........Description ..............................................QtyMTN55381...........MNT PROFESSIONAL FRAME..................1MTN55385...........MNT HEAVY DUTY FRAME ......................1MTN55386...........MNT GENERAL PURPOSE FRAME...........1

Display Contents / Open StockPart Number ........Description ..............................................QtyMTN55341...........MNT 12X18 COBALT BLD ........................5MTN55342...........MNT 12X24 COBALT BLD ........................5MTN55343...........MNT 12X32 COBALT BLD ........................5MTN55344...........MNT 3 BLD COBALT.................................5

Display Contents / Open StockPart Number ........Description ..............................................QtyMTN55331...........12” x 18T Carbon Alloy Hacksaw Blade ...5MTN55332...........12” x 24T Carbon Alloy Hacksaw Blade ...5MTN55333...........12” x 32T Carbon Alloy Hacksaw Blade ...5MTN55334...........3 Pc. Carbon Alloy Hacksaw Blade Set .....5

displays


MTN5580058 Piece Mountain Bi-Metal Hole Saw Display• Cobalt high speed steel teeth for a longer tool life• 1-1/2" cutting depth• Fits all brands of arbors, Arbors included with display• Display ships with all peghooks and signage

Includes hole saws up to 4" in diameter. Display alsoincludes replacement pilot drill bits and arbors.

MTN5570036 Piece Mountain Bi-Metal Reciprocating Saw Blade Display• Cobalt high speed teeth cut 5X longer than standard carbon blades• Universal shank fits all brands of reciprocating saws• Blades are in 4", 6" and 12" lengths• Display ships with peghooks and signage

36 piece bi-metal reciprocating saw blade display contains all the popular bladeslengths and teeth configurations. Blades are designed to cut wood, soft metals,hard metals, pvc, fiberglass and other materials.

Display Contents / Open StockPart Number.....Description...........................................QtyMTN55701 .......MNT 6TX12in. BI-MTL DEM RCP ..........2MTN55702 .......MNT 14TX12in. BI-MTL RECIP ..............2MTN55703 .......MNT 14TSX4in. BI-MTL RECIP ..............2MTN55704 .......MNT 18TSX4in. BI-MTL RECIP ..............2MTN55705 .......MNT 14TX4in. BI-MTL RECIP ................2MTN55706 .......MNT 18TX4in. BI-MTL RECIP ................2MTN55707 .......MNT 24TX4in. BI-MTL RECIP ................2MTN55708 .......MNT 10/14TX6in. BI-MTL RECP............2MTN55709 .......MNT 6TX6in. BI-MTL DEM RECP ..........2MTN55710 .......MNT 8/10TX6in. DEM RECIP ................2MTN55711 .......MNT 14TX6in. BI-MTL RECIP ................2

Part Number.....Description...........................................QtyMTN55712 .......MNT 18TX6in. BI-MTL RECIP ................2MTN55713 .......MNT 24TX6in. BI-MTL RECIP ................2MTN55714 .......MNT 10/14TX9in. BI-MTL RECP............2MTN55715 .......MNT 6TX9in. BI-MTL DEM RECP ..........2MTN55716 .......MNT 8/10TX9in. BI-MTL DEM R............2MTN55717 .......MNT 4PC BI-MTL RECIP SET.................2MTN55718 .......MNT 18TX9in. BI-MTL RECIP ................2

Display Contents / Open StockPart Number ........Description ..............................................QtyMTN55810...........MNT 5/8 BI-MTL HOLE SAW....................2MTN55812...........MNT 3/4 BI-MTL HOLE SAW....................2MTN55814...........MNT 7/8 BI-MTL HOLE SAW....................2MTN55816...........MNT 1in. BI-MTL HOLE SAW...................2MTN55818...........MNT 1-1/8 BI-MTL HOLE SAW.................2MTN55820...........MNT 1-1/4 BI-MTL HOLE SAW.................2MTN55822...........MNT 1-3/8 BI-MTL HOLE SAW.................2MTN55824...........MNT 1-1/2 BI-MTL HOLE SAW.................2MTN55826...........MNT 1-5/8 BI-MTL HOLE SAW.................2MTN55828...........MNT 1-3/4 BI-MTL HOLE SAW.................2MTN55830...........MNT 1-7/8 BI-MTL HOLE SAW.................2MTN55832...........MNT 2in. BI-MTL HOLE SAW....................2MTN55834...........MNT 2-1/8 BI-MTL HOLE SAW.................2MTN55836...........MNT 2-1/4 BI-MTL HOLE SAW.................2MTN55840...........MNT 2-1/2 BI-MTL HOLE SAW.................2MTN55842...........MNT 2-5/8 BI-MTL HOLE SAW.................2MTN55848...........MNT 3in. BI-MTL HOLE SAW....................2MTN55850...........MNT 3-1/8 BI-MTL HOLE SAW.................2MTN55852...........MNT 3-1/4 BI-MTL HOLE SAW.................2MTN55856...........MNT 3-1/2 BI-MTL HOLE SAW.................2MTN55864...........MNT 4in. BI-MTL HOLE SAW....................2MTN55871...........MNT A-ARBOR 1/4 RD 1/2-20..................2MTN55872...........MNT A-ARBOR 3/8 HX 1/2-20..................2MTN55873...........MNT A-ARBOR 7/16HX 1/2-20.................2MTN55874...........MNT B-ARBOR 3/8 HX 5/8-18 ..................2MTN55875...........MNT B-ARBOR 7/16HX 5/8-18 .................2MTN55876...........MNT LONG PILOT DRILL..........................3MTN55877...........MNT SHORT PILOT DRILL ........................3

displays


MTN5502022 Piece Mountain Hand File Display• Professional file display includes twenty two of the most popular hand files

• Made from premium tool steel for a long tool life• Precision cut teeth for clean, smooth filing• Handle and inserts are included with the display• Display includes peghooks and signage

MTN5590011 Piece Mountain Tap and Die Tool Display• Contains eleven tap and die handles• Display offers die stock for hex dies 1" across the flats and larger

• Tap handles hold taps from 1/16" to 1/2" shanks• Professional quality handles that fits all brands• Display ships with peghooks• Fits hex dies and taps up to a 1/2" shank.

Display Contents / Open StockPart Number ........Description ..............................................QtyMTN55021...........MNT 6in. MILL BASTARD FILE..................2MTN55022...........MNT 8in. MILL BASTARD FILE..................2MTN55023...........MNT 10in. MILL BASTARD FIL ..................2MTN55024...........MNT 10in. FLAT BASTARD FIL..................2MTN55025...........MNT 8in. ROUND BASTARD FIL...............2MTN55026...........MNT 6in. XTRA SLIM TAPR FI ...................2MTN55027...........MNT 5/32X8in. CHAINSAW FIL................2MTN55028...........MNT 3/16X8in. CHAINSAW FIL................2MTN55029...........MNT 7/32X8in. CHAINSAW FIL................2MTN55030...........MNT 10in. HALF-RND BASTARD..............2MTN55031...........MNT FLEXIBLE FILE HANDLE...................2

Display Contents / Open StockPart Number ........Description ..............................................QtyMTN55905...........MNT T-HDL TAP WRCH 0-1/4...................2MTN55906...........MNT T-HDL TAPWRCH 1/4-1/2 ................2MTN55907...........MNT 1in. HEX DIE STOCK........................3MTN55908...........MNT HD ADJ TAPWR 1/16-1/2 ................2MTN55909...........MNT 1in. ADJ DIE STOCK........................2

MTN5569016 Piece Spot Weld Drill Display• Spot weld drill bit is made from Cobalt steel• Included in the display is a spot weld cutter withreplacement cutter blades

• Individually carded for retail display• Display ships with peghooks and backer signage

16 piece display includes all three single sided spot weld drills, three double sided spot weld drills and one cutter and replacement blade pack.

Display Contents / Open StockPart Number......Description...........................................QtyMTN55691 ........MNT 3/8 SPOT WELD CUTTER.............2MTN55692 ........MNT 3/8 REPLACEMENT CUTTR..........2MTN55693 ........MNT 10.0MM SPOT WELD DRLL..........2MTN55694 ........MNT 6.5MM SPOT WELD DRILL...........2MTN55695 ........MNT 8.00MM SPOT WELD DRLL..........2MTN55696 ........MNT 10.0MM DE SPOT WELD D..........2MTN55697 ........MNT 6.50MM DE SPOT WELD D..........2MTN55698 ........MNT 8.00MM DE SPOT WELD D..........2

MTN034-00 ................28MTN1012....................12MTN1012-10 ..............12MTN1012-11 ..............12MTN1012-12 ..............12MTN1012-13 ..............12MTN1012-14 ..............12MTN1012-5 ................12MTN1012-5.5 .............12MTN1012-6 ................12MTN1012-7 ................12MTN1012-8 ................12MTN1012-9 ................12MTN1012-R ................12MTN1041/2.................15MTN1041/2D ..............15MTN1041/4.................15MTN1041/4D ..............15MTN10410M...............15MTN10411/32.............15MTN10411/32D ..........15MTN10411M...............15MTN10411MD.............15MTN10412M...............15MTN10412MD.............15MTN10413M...............15MTN10413MD.............15MTN10414M...............15MTN10414MD.............15MTN10415/32D ..........15MTN1043/16...............15MTN1043/8.................15MTN1043/8D ..............15MTN1043/8MA............15MTN1044.5M..............15MTN1044M.................15MTN1045.5M..............15MTN1045/16...............15MTN1045/16D ............15MTN1045M.................15MTN1046EX................15MTN1046M.................15MTN1046MD...............15MTN1046SP................15MTN1047....................14MTN1047/16...............15MTN1047/16D ............15MTN1047/32...............15MTN1047M.................15MTN1047MD...............15MTN1048M.................15MTN1048MD...............15MTN1049/16...............15MTN1049/16D ............15MTN1049/32...............15MTN1049/32D ............15MTN1049M.................15MTN1049MD...............15MTN104RK...................4MTN104UJ..................15MTN1051....................14MTN1051/2.................15MTN1051/2D ..............15MTN1051/2D ..............15MTN1051/4.................15MTN1051/4MA............15MTN10510M...............15MTN10510MD.............15MTN10511/16.............15MTN10511/16D ..........15MTN10511M...............15MTN10511MD.............15MTN10512M...............15MTN10512MD.............15MTN10513/16.............15MTN10513/16D ..........15MTN10513M...............15MTN10513MD.............15MTN10514M...............15MTN10514MD.............15MTN10515M...............15MTN10515MD.............15MTN10516M...............15MTN10516MD.............15MTN10517M...............15MTN10517MD.............15

MTN10518M...............15MTN10518MD.............15MTN10519M...............15MTN10519MD.............15MTN1053/4.................15MTN1053/4D ..............15MTN1053/8.................15MTN1053/8D ..............15MTN1053EX................15MTN1055/16...............15MTN1055/8.................15MTN1055/8D ..............15MTN1056EX................15MTN1056M.................15MTN1057/16...............15MTN1057/16D ............15MTN1057/8.................15MTN1057/8D ..............15MTN1057M.................15MTN1058M.................15MTN1059/16...............15MTN1059/16D ............15MTN1059/16SP...........15MTN1059M.................15MTN105RK...................4MTN105SPH ...............15MTN1060....................12MTN1060B..................12MTN1060R..................12MTN11........................29MTN1104....................27MTN127951................11MTN14166..................14MTN1461....................29MTN14812..................13MTN16150..................14MTN16200..................14MTN16250..................14MTN16600..................14MTN1802....................14MTN1826....................44MTN1850....................29MTN1893....................27MTN2100....................29MTN2157....................26MTN2390....................29MTN2510....................31MTN252219................39MTN252225................39MTN2525....................31MTN2700....................29MTN2730....................29MTN2800....................29MTN2810....................29MTN3326....................16MTN3327....................16MTN3404....................32MTN3500....................16MTN3550....................16MTN4001....................21MTN4025A..................21MTN4116....................20MTN4116-RK ..............20MTN4116/4117-CUP...20MTN4117....................20MTN4117-RK ..............20MTN4118....................20MTN4118-CUP ............20MTN4118-RK ..............20MTN4202....................20MTN4206....................21MTN4206-3 ................21MTN4356....................28MTN450......................13MTN4507....................27MTN4526....................21MTN4601-100 ............45MTN4601-5 ................45MTN4602-100 ............45MTN4602-5 ................45MTN4602-5 ................45MTN48418..................11MTN5000....................40MTN5020....................41MTN5024....................41MTN5030....................41

MTN5036DD ...............40MTN5042BD ...............40MTN5103A..................25MTN5103A..................26MTN5106A..................25MTN5112A..................25MTN5116A..................25MTN5119....................26MTN5137A..................26MTN5138....................26MTN5140....................29MTN5174A..................25MTN5175A..................25MTN5176A..................25MTN5200....................40MTN55020..................54MTN5505A..................24MTN5506A..................25MTN5506AJ ................25MTN55103..................42MTN55103..................44MTN55104..................46MTN55200..................47MTN5520A..................24MTN55290..................42MTN55330..................52MTN55334..................43MTN55340..................52MTN55380..................52MTN55400..................47MTN55490..................42MTN55500..................51MTN55501..................44MTN55502..................44MTN55503..................44MTN55504..................44MTN55505..................44MTN55506..................44MTN55507..................44MTN55508..................44MTN55509..................44MTN55510..................44MTN55511..................44MTN55512..................44MTN55513..................44MTN55514..................44MTN55515..................44MTN55516..................44MTN55517..................44MTN55518..................44MTN55519..................44MTN5551A..................26MTN55520..................44MTN55521..................44MTN55522..................44MTN55523..................44MTN55524..................44MTN55525..................44MTN55526..................44MTN55527..................44MTN55528..................42MTN55529..................42MTN55530..................42MTN55554..................42MTN55560..................43MTN55561..................43MTN55562..................43MTN55563..................43MTN55564..................43MTN55565..................43MTN55566..................43MTN55567..................43MTN55568..................43MTN55569..................43MTN55570..................43MTN55600..................46MTN55670..................49MTN55672..................42MTN55690..................54MTN55691..................43MTN55692..................43MTN55693..................43MTN55694..................43MTN55696..................43MTN55697..................43MTN55699..................42

MTN55700..................53MTN55717..................43MTN55800..................53MTN55880..................43MTN5590....................23MTN55900..................54MTN55901..................48MTN55902..................49MTN5590EXTU............23MTN5590R..................23MTN5590REXTU..........23MTN5590RU ...............23MTN5590U..................23MTN55910..................50MTN5592....................24MTN55930..................50MTN5593B..................22MTN5593BU ...............22MTN5593R..................22MTN5593RU ...............22MTN5594B..................23MTN5594BU ...............23MTN5594R..................23MTN5594RU ...............23MTN55950..................51MTN5595B..................22MTN5595BU ...............22MTN5595R..................22MTN5595RU ...............22MTN55970..................45MTN55971..................45MTN55972..................45MTN5606A..................24MTN5612A..................24MTN5620AHA .............24MTN5622A..................24MTN5813SLF ..............28MTN5900....................27MTN5910....................27MTN6182....................21MTN6183....................21MTN6218....................44MTN6224....................30MTN6260....................30MTN6324....................30MTN633825RJ............30MTN633850RJ............30MTN6360....................30MTN6375....................30MTN643825RJ............30MTN643850RJ............30MTN663825B..............30MTN663825O..............30MTN663825R..............30MTN663850B..............30MTN663850O..............30MTN663850R..............30MTN683......................28MTN6906....................21MTN6906V..................21MTN6916V..................21MTN700......................26MTN7100....................32MTN7110....................32MTN7115A..................10MTN7136A..................10MTN7207.....................4MTN7215.....................3MTN7226A...................4MTN7228A...................4MTN7235.....................3MTN7245.....................3MTN7300....................11MTN7301....................11MTN7302.....................5MTN7304....................11MTN7307.....................5MTN7310.....................9MTN7311.....................8MTN7317.....................8MTN7318.....................8MTN7320.....................6MTN7321.....................6MTN7326.....................7MTN7329.....................5MTN7330.....................7

MTN7330-4 .................7MTN7330-5 .................7MTN7332.....................7MTN7333.....................9MTN7334.....................9MTN7338.....................6MTN7353.....................8MTN7372.....................4MTN74112..................11MTN74138..................11MTN8051....................28MTN8057....................28MTN8200....................39MTN8201....................39MTN8202....................39MTN8203....................39MTN8204B..................38MTN8205....................38MTN8207....................39MTN8208....................39MTN8210....................38MTN8220....................38MTN8272....................38MTN8300....................39MTN8400....................39MTN8401....................39MTN8402....................39MTN8404....................38MTN8405....................38MTN8406....................38MTN8407....................38MTN841225RJ............30MTN841250RJ............30MTN8480....................45MTN8481....................45MTN8504....................28MTN8539....................45MTN8539.....................9MTN8540....................45MTN8540.....................9MTN8720....................29MTN8750....................29MTN8801A..................32MTN8811....................32MTN9001....................27MTN90200..................28MTN9030....................27MTN91003998............30MTN91003999............30MTN91009404............31MTN91009405............31MTN91009407............31MTN91009408............31MTN91009409............30MTN91009410............30MTN9101....................28MTN9200....................27MTN9201....................27MTN9304....................31MTN9313....................31MTN9320....................31MTN9410....................13MTN9480.....................9MTN9481.....................9MTN9485....................45MTN9485.....................9MTN9486....................45MTN9486.....................9MTN9762....................31MTNBLOWKIT..............31MTNC48......................13MTNC48-1 ..................13MTNC48-2 ..................13MTNC48-3 ..................13MTNC48-3 ..................13MTNC48-4 ..................13MTNC48-4 ..................13MTNC48-5 ..................13MTNC48-5 ..................13MTNC48-H1 ................13MTNEDG-G..................10MTNERS132................11MTNHR250 .................30MTNHR335 .................30MTNHR350 .................30MTNHRL550................30

MTNHRM550 ..............30MTNHROXY250 ...........35MTNMIG6120..............33MTNMIG6160..............33MTNMIG6226..............33MTNMS3000...............45MTNPAT18 ..................38MTNPAT706 ................38MTNPC6016................34MTNPC6026................34MTNRF7......................13MTNRM6.....................13MTNRP8031K34..........21MTNRP8824-A ............21MTNSMTOOLBAG........16MTNTBR4907-BLACK.......17MTNTBR4907-BLUE.........17MTNTBR4907-RED...........17MTNTBR4907-SILVER.......17MTNTBR8120BA-BLACK..19MTNTBR8120BA-BLUE ....19MTNTBR8120BA-XRED....19MTNTBS8002-SILVER.......19MTNTBS8002-XBLACK.....19MTNTBS8002-XBLUE.......19MTNTBS8002-XRED.........19MTNTBS8102A-XBLACK..18MTNTBS8102A-XBLUE.....18MTNTBS8102A-XRED.......18MTNTBT4905A-SILVER.....17MTNTBT8008A-SILVER.....19MTNTBT8008A-XBLACK ..19MTNTBT8008A-XBLUE.....19MTNTBT8008A-XRED.......19MTNTBT8010A-BLACK.....19MTNTBT8010A-RED.........19MTNTBT8010A-SILVER.....19MTNTBT8010ABLUE.........19MTNTBT8112CA-XBLACK19MTNTBT8112CA-XBLUE ..19MTNTBT8112CA-XRED....19MTNTIG6155...............34MTNTOOLBAG.............16MTNUL39-4PK ............28MTNWE6900...............36MTNWE6901...............36MTNWE6903...............36MTNWE6904...............36MTNWE6905...............36MTNWEASG-16 ...........36MTNWEASS-16 ...........36MTNWECGA580 ..........37MTNWEGFLOW............36MTNWEGR-1 ...............37MTNWEGR-2 ...............37MTNWEGR-2H.............37MTNWEPAF-D13 .........36MTNWEPAF-M26.........35MTNWEPAF-M723.......35MTNWEPCK40.............35MTNWESGUN ..............35MTNWEW-6210 ..........37MTNWEW-6211 ..........37MTNWEW-6215 ..........37MTNWEW-6216 ..........37MTNWEW-6220 ..........37MTNWEW-6221 ..........37MTNWEW-6230 ..........37MTNWEW-6231 ..........37MTNWEW-6235 ..........37MTNWEW-6236 ..........37MTNWEW-6240 ..........37MTNWEW-6241 ..........37MTNWEW-6245 ..........37MTNWEW-6445 ..........37MTNXDBS13WH ..........42MTNXDBS29WH ..........42MTNXH-TT-111 ...........16


PART NUMBER INDEXPart# Page# Part# Page# Part# Page# Part# Page# Part# Page# Part# Page#


2013 product catalog

remco supplies mountain brand! call for best pricing!!! (877) 897-9776

Documents