robco high performance lubricants & greases · 2020. 1. 30. · biodegradable diamond drill rod...
TRANSCRIPT
LUBRICANTS & GREASESEXPLORE a WORLD of
LUBRICANTS & GREASESWater Conditions
High Temperature
Low Tempature
High Pressure
Corrosion
Food Grade
Bearing Wear
Gear Wear
Environmentally Friendly
Tube - 400 grams (14 oz) EP/MP-1004 only
Pail - 17 kg (38 lbs) 20 litres (5 gal)
Box - 23 kg (50 lbs) Brick Grease only
Keg - 55 kg (122 lbs) 120 litres (32 gal)
Drum - 180 kg (400 lbs) 205 litres (54 gal)
Tote - 1750 kg (3858 lbs)
Lubricant & Grease Specialists
Robco’s Lubricant Division supplies high performance lubricants and greases to meet the extreme operating conditions found in exploration drilling, paper mills, steel mills, mining and general industry to maximize production e�ciency. Robco’s specialists take pride in the performance of our products and continuously monitor technological advancements to improve our formulations.
Since 1911, Robco products are used everywhere in heavy industry as components of original equipment and in aftermarket maintenance and repair.
ISO 9001:2008 Certi�ed, our commitment to focusing on Engineered Solutions has fostered an alignment between our customers’ satisfaction and our success. Our Total Cost of Ownership approach to problem-solving often results in our customers saving substantially more than their total maintenance budgets for the products that we supply.
MONTREAL Tel.: 514.367.2252 Fax: 514.367.1144MISSISSAUGA Tel.: 905.564.6555 Fax: 905.564.6901EDMONTON Tel.: 780.469.0601 Fax: 780.469.0765
Heat Resistant Materials - Engineered Plastics - Rubber Products - Metallic Gaskets Soft Gaskets - Mechanical Seals - Compression Packing - Lubricants & Greases
Email: [email protected]
www.robco.com
ROBCO HIGH PERFORMANCE LUBRICANTS & GREASESEspecially formulated for high temperature, extreme pressure and water wash-out conditions
Trusted Supplier
In addition to Robco lube and grease solutions listed in this brochure, Robco is a trusted master distributor of specialized quality products from Dixon/Asbury, Saf-T-Eze and Royal Purple.
Robco EP/MP-1004The #1 EP/MP grease in the industry to protect from water-washout.
Where water-washout under extreme shock loads or high temperature is causing you trouble, EP/MP-1004 is THE solution: it stays on to provide a tough lubricating �lm that keeps equipment running smoothly in extreme conditions.
Robco RCG-1255Rail Curve Grease
Robco RCG-1255 is a revolutionary blend of oil, graphite and special additives. Excellent dispersion properties and easy spreadability when used as track side rail curve grease. Will pump and spread at -45°F and will not liquefy at high temperatures.
Robco SBL-1000High Temperature Graphite Lubricant
Robco SBL-1000 high temperature lubricant contains high viscosity oil, graphite, molybdenum disul�de and a high �ash carrier to transfer solid ingredients into very close tolerances. SBL-1000 will not burn or smoke and has excellent shelf life due to an extremely �ne-particle solid suspension.
Robco DDR-1063High Performance Diamond Drill Rod Grease with low washout
DDR-1063 new generation diamond drill rod grease with a modi�ed complex of overbased sulfonates, o�ers exceptional mechanical stability. It will not liquefy or soften up to 500°F; it is water resistant and does not rub o� the rod while drilling. Easy to spread on drilling rods in any environment, hot or cold.
Robco Bio-DDRBiodegradable Diamond Drill Rod Grease
Bio-DDR non-toxic, biodegradable lubricant for diamond drill rods is specially formulated to o�er optimal performance with minimal environmental impact at a reasonable cost.
Applications: steel mills, mobile equipment in construction and mining, paper mill wet ends, bearings, crushers, loader bucket pins and more
NLGI Penetration Dropping PointGrade 40ºC 100ºC ASTM D-21 ASTM D-2265
0 - 2 208 17.8 280-370 300ºC Green
ViscosityColour
Applications: diamond drill rods, pneumatic and percussion tools
NLGI Penetration Dropping PointGrade 40ºC 100ºC ASTM D-21 ASTM D-2265
3 42.7 9.1 220-250 163ºC Green
ViscosityColour
Applications: diamond drill rods and wet conditions
NLGI Penetration Dropping PointGrade 40ºC 100ºC ASTM D-21 ASTM D-2265
3 232 20 240 250ºC Tan
ViscosityColour
Applications: roller chains, kiln car wheels, slides and castings in contact with side bars under high temperature conditions
NLGI Penetration Dropping PointGrade 40ºC 100ºC ASTM D-21 ASTM D-2265
- 240 382ºC Dark
ViscosityColour
Applications: track side lubrication.
NLGI Penetration Dropping PointGrade 40ºC 100ºC ASTM D-21 ASTM D-2265
1 86 10.3 310-340 300ºC Grey
ViscosityColour
Robco Bio-DDR
Robco EP/MP-1004
Robco DDR-1063
Robco SBL-1000
Robco RCG-1255
200-230
Robco WRD-4481Wire Rope Dressing
Robco WRD-4481 is a state-of-the-art, high performance semi-�uid, non-soap wire rope dressing that rapidly penetrates to the core and will not �ing o� during operation. Applications: mine hoist rope, crane and marine
cables
Robco WRD-OG LubeWire Rope Dressing
Robco WRD-OG Lube is a high performance asphaltic-based lubricant that ensures excellent protection against wear and corrosion.
Applications: highly e�ective wire rope �eld dressing and an e�cient open gear lubricant
Robco FDA WRL-400 Semi-SynlubFDA Wire Rope Lubricant
A premium food processing machinery lubricant (NSF H-1 A) fully formulated with extra tackiness additives and waterproof oils that resist heavy water wash down. Applications: chains, wire ropes, linkages, cams,
helical gearboxes, and anywhere a food grade lubricant is required.
Robco FRD-2200Friction Rope Dressing
Robco FRD-2200 lubricant provides extreme water resistance, good corrosion protection and its dry �lm provides a chemi-cal barrier against acidic and alkaline environments. Applications: locked coil ropes used on friction
winders (Koepe hoists)
Robco BG-7060Brick Grease
Robco BG-7060 sodium based grease can be used to replace conventional brick grease. E�ective where medium to high temperature is a factor. Applications: paper mill dryers, ball mills in mining
crusher applications, Babbitt bearings and trunnion bearings
Robco BG-8118Brick Grease
Robco BG-8118 lithium brick grease can be used to replace conventional brick grease. E�ective where medium to high temperature is a factor. Applications: paper mill dryers, ball mills in mining
crusher applications, Babbitt bearings and trunnion bearings
Robco HTSock Grease
Robco HT sock grease is a high quality lithium-OH stearate grease. It is specially formulated to work in high temperature applications where conventional brick grease is used. Applications: paper mill dryers, ball mills in mining
applications and trunnion bearings
NLGI Penetration Flash PointGrade 40ºC 100ºC ASTM D-21 ASTM D-92
- - 375-425 - 227ºC Grey
ViscosityColour
NLGI Penetration Flash PointGrade 40ºC 100ºC ASTM D-21 ASTM D-92
- 1400 90 - 220ºC Grey
ViscosityColour
NLGI PenetrationGrade 40ºC 100ºC ASTM D-21
- 370 25 - 202ºC Translucent
Flash PointASTM D-92
ViscosityColour
NLGI PenetrationGrade 40ºC 100ºC ASTM D-21
S75 - 81 - 140ºC Amber
Flash PointASTM D-92
ViscosityColour
NLGI Penetration Dropping PointGrade 40ºC 100ºC ASTM D-21 ASTM D-2265
8+ 450-550 55-65 18-22 182ºC Dark Brown
ViscosityColour
NLGI Penetration Dropping PointGrade 40ºC 100ºC ASTM D-21 ASTM D-2265
6 450-550 55-65 18-22 196ºC Light Brown
ViscosityColour
NLGI Penetration Dropping PointGrade 40ºC 100ºC ASTM D-21 ASTM D-2265
4.5 220-230 17-19 160-190 205ºC Amber
ViscosityColour
Robco WRD-4481
Robco WRD-OG Lube
Robco FDA WRL-400 Semi-Synlub
Robco FRD-2200
Robco BG-7060
Robco BG-8118
Robco HT Sock Grease
LUBRICANTS & GREASESExplore a World of
-