rosave.z depth cartridge filters - lenntech · pdf filero.zs 01-40 xk 1236278 ro.zs 01-40-eht...
TRANSCRIPT
ROSave.Z* Depth Cartridge Filters For Reverse Osmosis Pretreatment Using Z.Plex* Technology
Figure 1: Z.Plex Filter Technology
Description and Use
ROSave.Z is manufactured using patent pending Z.Plex filter technology (Figure 1) and is engineered for reverse osmosis pretreatment and other pure water applications. ROSave.Zs' proprietary filter matrix provides unmatched performance in these applications. • Up to twice the life of conventional depth filters • Up to 50% lower pressure drop • Up to 100% greater dirt holding capacity • Superior SDI reduction • Melt-bonded exterior ensures no media migration • Provides lower total cost of filtration operations • NSF 42 certified, FDA compliant
Typical Applications
Reverse osmosis pretreatment in industries including: • Bottled water • Beverage • Electronics
General Properties
Materials of Construction
ROSave.Z filters are made of polypropylene construction. Tables 1 and 2 provide information on dimensions and flow performance.
Table 1: Dimensions
Nominal Outside Diameter Nominal Inside Diameter
2.75” (6.4 cm) 1” (2.5 cm)
Table 2: ROSave.Z 1 and 5 micron vs. Conventional 5 micron Flow Performance in Clean Water1
Lenntech
[email protected] Tel. +31-152-610-900www.lenntech.com Fax. +31-152-616-289
Page 2 FS1097EN
Micron Ratings, Lengths and End Adapters • Micron ratings: 1 and 5 micron nominal • Standard lengths fit most housings - custom
lengths are also available • Wide range of end adapters including self-sealing
spring, 222 and 226 O-rings, and extended cores.
Additional Information
ROSave.Z cartridge filters are made from thermally-bonded fibers of polypropylene. GE certifies that it uses no resin binders, lubricants, antistatic or re-lease agents or other additives in the manufacture of these cartridges, and that the resin used for manufacturing the filter media meets the food con-tact requirements of U.S. FDA 21CFR regulations. When required, specify only FDA compliant sealing materials and end-adapters.
GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE representative for more in-formation.
The ROSave.Z element is tested and certified by NSF International against NSF/ANSI Standard 61 for ma-terial requirements only.
If you are ordering ROSave.Z filters with standard ends (with no adapter on either end), select one designation from each of the first three columns. Your Product Order Number will look like this: RO.Zs 05-40. If you are ordering ROSave.Zs with end adapters, select designations from all applicable columns. Your Product Order Number will look like this: RO.Zs 05-40 XK.
Table 4: Ordering Information
Type Micron
Rating, mm Cartridge Length,
Inches (cm) End #1 Adapter End #2 Adapter Material
RO.Zs
01 = 1 05 = 5
9 ¾ (24.8) 9 7/8 (25.4)
L = Extended Core E = 222 O-Ring
K = Self seal spring H = Fin
O-Rings S = Silicone
I.D. – 1.0 O.D. – 2.5
10 (25.4) 19 ½ (49.5) 20 (50.8) 29 ¼ (74.3) 30 (76.2) 40 (101.6)
F = 226 O-Ring X = Standard ROSave.Zs plain end (non gasket) Y = Flat Gasket
S = Solid End X = Standard ROSave.Zs (no gasket) Y = Flat Gasket
E = EPDM V = Viton2 B = Buna P = Santoprene (flat gasket only)
Lenntech
[email protected] Tel. +31-152-610-900www.lenntech.com Fax. +31-152-616-289
The below GE -series cartridge filters are all the models that are potentially possible in all variations.Please note that not all models are actually produced or on stock and some model numbers and names have become obsolete.Nevertheless this should help as cross reference table chart for GE filters nomenclature.
RO save
RO.Zs019 3/4XK RO.Zs059 3/4XK RO.Zs01-9 3/4XK RO.Zs05-9 3/4XK RO.Zs 05-9 3/4 1236613 RO.Zs 01-10 1236577 RO.Zs 01-40-EHV 1255141 RO.Zs 05-40-EHE 4320952A
RO.Zs019 3/4XX RO.Zs059 3/4XX RO.Zs01-9 3/4XX RO.Zs05-9 3/4XX RO.Zs 01-9 3/4 1236612 RO.Zs 01-10-EHE 1240999 RO.Zs 01-40-ESS 1255140 RO.Zs 05-40-EHS 1242211
RO.Zs019 7/8XK RO.Zs059 7/8XK RO.Zs01-9 7/8XK RO.Zs05-9 7/8XK RO.Zs 05-9 7/8 1236611 RO.Zs 01-10-EHS 1244212 RO.Zs 01-40-FHS 1255775 RO.Zs 05-40-ESE 1262514
RO.Zs019 7/8XX RO.Zs059 7/8XX RO.Zs01-9 7/8XX RO.Zs05-9 7/8XX RO.Zs 01-9 7/8 1236610 RO.Zs 01-10-XK 1236580 RO.Zs 01-40-XK 1236278 RO.Zs 05-40-LYYP 2298427A
RO.Zs0110XK RO.Zs0510XK RO.Zs01-10XK RO.Zs05-10XK RO.Zs 05-10 1236581 RO.Zs 01-19 1/2 1236240 RO.Zs 01-40-YYP 1261316 RO.Zs 05-40-XK 1236279
RO.Zs0110XX RO.Zs0510XX RO.Zs01-10XX RO.Zs05-10XX RO.Zs 01-10 1236577 RO.Zs 01-19 1/2-XK 1236272 RO.Zs 01-750mm 1242253 RO.Zs 05-40-YYP 1265415
RO.Zs0119 1/2XK RO.Zs0519 1/2XK RO.Zs01-19 1/2XK RO.Zs05-19 1/2XK RO.Zs 05-19 1/2 1236241 RO.Zs 01-20 1236262 RO.Zs 01-9 3/4 1236612 RO.Zs 05-750mm 1242254
RO.Zs0119 1/2XX RO.Zs0519 1/2XX RO.Zs01-19 1/2XX RO.Zs05-19 1/2XX RO.Zs 01-19 1/2 1236240 RO.Zs 01-20-EHS 1243145 RO.Zs 01-9 7/8 1236610 RO.Zs 05-9 3/4 1236613
RO.Zs0120XK RO.Zs0520XK RO.Zs01-20XK RO.Zs05-20XK RO.Zs 05-19 1/2 1236273 RO.Zs 01-20-ESS 1240670 RO.Zs 05-10 1236581 RO.Zs 05-9 7/8 1236611
RO.Zs0120XX RO.Zs0520XX RO.Zs01-20XX RO.Zs05-20XX RO.Zs 01-19 1/2 1236272 RO.Zs 01-20-ESV 3019087 RO.Zs 05-10-EHS 1266998
RO.Zs0129 1/4XK RO.Zs0529 1/4XK RO.Zs01-29 1/4XK RO.Zs05-29 1/4XK RO.Zs 05-20 1236263 RO.Zs 01-20-XK 1236270 RO.Zs 05-10-XK 1236582
RO.Zs0129 1/4XX RO.Zs0529 1/4XX RO.Zs01-29 1/4XX RO.Zs05-29 1/4XX RO.Zs 01-20 1236262 RO.Zs 01-29 1/4 1236264 RO.Zs 05-17.125 1262847
RO.Zs0130XK RO.Zs0530XK RO.Zs01-30XK RO.Zs05-30XK RO.Zs 05-20 XK 1236271 RO.Zs 01-29 1/4-XK 1236274 RO.Zs 05-19 1/2 1236241
RO.Zs0130XX RO.Zs0530XX RO.Zs01-30XX RO.Zs05-30XX RO.Zs 01-20 XK 1236270 RO.Zs 01-30 1236266 RO.Zs 05-19 1/2-XK 1236273
RO.Zs0140XK RO.Zs0540XK RO.Zs01-40XK RO.Zs05-40XK RO.Zs 05-29 1/4 1236265 RO.Zs 01-30-EHE 1240998 RO.Zs 05-20 1236263
RO.Zs0140XX RO.Zs0540XX RO.Zs01-40XX RO.Zs05-40XX RO.Zs 01-29 1/4 1236264 RO.Zs 01-30-EHS 1255855 RO.Zs 05-20-ESS 1240669RO.Zs 05-29 1/4 1236275 RO.Zs 01-30-ESE 1242345 RO.Zs 05-20-XK 1236271RO.Zs 01-29 1/4 1236274 RO.Zs 01-30-ESS 1242226 RO.Zs 05-29 1/4 1236265
RO.Zs 05-30 1236267 RO.Zs 01-30-FHS 3012601 RO.Zs 05-29 1/4-XK 1236275RO.Zs 01-30 1236266 RO.Zs 01-30-XK 1236276 RO.Zs 05-30 1236267
RO.Zs 05-30 XK 1236277 RO.Zs 01-30-YYP 1261315 RO.Zs 05-30-EHS 1243695RO.Zs 01-30 XK 1236276 RO.Zs 01-39-YYP 1269753 RO.Zs 05-30-ESS 1242348
RO.Zs 05-40 1236269 RO.Zs 01-4 7/8 3000567 RO.Zs 05-30-XK 1236277RO.Zs 01-40 1236268 RO.Zs 01-40 1236268 RO.Zs 05-39-XK 1242121
RO.Zs 05-40 XK 1236279 RO.Zs 01-40-EHS 1240609 RO.Zs 05-39-YYP 3020359RO.Zs 01-40 XK 1236278 RO.Zs 01-40-EHT 1244540 RO.Zs 05-40 1236269
Lenntech B.V. Rotterdamseweg 402 2629HH Delft Netherlands
T +31-15-261.09.00
F +31-15-261.62.89