rotary files--carbide and high speed steel--precision machine...
TRANSCRIPT
-
Telephone 800–258–7162 or 603-332-9000Fax 1–603–332–8069
Jarvis Ground-from-the-Solid carbide rotary files are without question consideredthe most durable in lasting qualities of production and are particularly popular inthe fields of mold making, tool room and die ship use along with general production.
Repeated tests have proved Jarvis carbide rotary files to outlast ordinary filesmany times over. Their versatility of application ranges from use for any machinableor grindable materials whether plastics or hardened steel.
By consistent excellent performance and the usual economy of Jarvis tools, theyhave become firmly established among those who appreciate quality.
Jarvis rotary files can be reground innumerable times without loss of operatingefficiency. Our regrinding service is prompt and thorough and enables users ofour products to keep their costs at an unusually low level.
Standard fluting will be supplied unless otherwise specified.
Finer or coarser flutings can be furnished.
Diamond fluting is designed for tough and hardened steel dies, forgings, etc.,and will powder the chips.
Herringbone fluting is used only where superior finishes are required.
Diamond, herringbone and chipbreaker flutings may be furnished in fine, stan-dard and coarse.
Rotary Files--Carbide and High Speed Steel--Precision Machine Ground
Various carbide burr sets available.
1
-
Telephone 800–258–7162 or 603-332-9000Fax 1–603–332–8069
FileHead DiameterHead LengthStandard CutCoarse CutFine Cut
2501-A1/8”1/2”
100201100213100225
2501-B3/16”1/2”
100237100249100250
25011/4”1”
100262100274100286
2502-A5/16”
1”100298100304100316
25023/8”1”
100328100330100341
2502-S3/8”
1 1/4”100353100365100377
Rotary FilesHigh Speed Steel--Straight Cylindrical--1/4” Shank
FileHead DiameterHead LengthStandard CutCoarse CutFine Cut
2502-B7/16”
1”100389100390100407
25031/2”1”
100420100432100444
25045/8”1”
100456100468100470
2504-A3/4”3/4”
100481100493100500
25051”1”
100511100523100535
2
-
Telephone 800–258–7162 or 603-332-9000Fax 1–603–332–8069
Rotary FilesHigh Speed Steel--Cylindrical with Radius End--1/4” Shank
FileHead DiameterHead LengthStandard CutCoarse CutFine Cut
2506-A1/8”1/2”
100547100559100560
2506-B3/16”1/2”
100572100584100596
25061/4”1”
100614100626100638
2507-A5/16”
1”100640100651100663
25073/8”1”
100675100687100699
FileHead DiameterHead LengthStandard CutCoarse CutFine Cut
2507-S3/8”
1 1/4”100705100717100729
2508-A7/16”
1”100730100742100754
25081/2”1”
100766100778100780
25095/8”1”
100791100810100821
2509-A3/4”
1 1/4”100833100845100857
3
-
Rotary FilesHigh Speed Steel--Ball--1/4” Shank
Telephone 800–258–7162 or 603-332-9000Fax 1–603–332–8069
FileHead DiameterHead LengthStandard CutCoarse CutFine Cut
25101/8”1/8”
100869100870100882
25113/16”3/16”
100894100900100912
25121/4”1/4”
100924100936100948
25135/16”5/16”
100950100961100973
25143/8”3/8”
100985100997101000
25151/2”1/2”
101011101023101035
25165/8”5/8”
101047101059101060
25173/4”3/4”
101072101084101096
25181”1”
101102101114101126
Rotary FilesHigh Speed Steel--Oval--1/4” Shank
4
FileHead DiameterHead LengthStandard CutCoarse CutFine Cut
25203/16”5/16”
101138101140101151
25211/4”3/8”
101163101175101187
2521-A5/16”1/2”
101199101205101217
25223/8”
9/16”101230101242101254
25231/2”3/4”
101266101278101280
25245/8”1”
101321101333101345
25253/4”1”
101357101369101370
-
Rotary FilesHigh Speed Steel--Tree Radius End--1/4” Shank
Telephone 800–258–7162 or 603-332-9000Fax 1–603–332–8069
FileHead DiameterHead LengthStandard CutCoarse CutFine Cut
2526-A1/8”7/16”
101382101394101400
2526-C3/16”1/2”
101412101424101436
25261/4”1/2”
101448101450101461
2526-E1/4”3/4”
101473101485101497
25273/8”3/4”
101503101515101527
2527-A3/8”7/8”
101539101540101552
2527-B3/8”1”
101564101576101588
2528-B3/8”
1 1/8”101590101606101618
FileHead DiameterHead LengthStandard CutCoarse CutFine Cut
2528-A1/2”3/4”
101620101631101643
25281/2”
1 1/8”101655101667101679
25295/8”7/8”
101680101692101709
2529-B3/4”1”
101710101722101734
2529-A3/4”
1 1/4”101746101758101760
2529-C1 1/8”1 3/4”
101771101783101795
5
-
Rotary FilesHigh Speed Steel--Cone--1/4” Shank
Telephone 800–258–7162 or 603-332-9000Fax 1–603–332–8069
FileHead DiameterHead LengthStandard CutCoarse CutFine Cut
25351/4”1/2”
101874101886101898
2535-A1/4”3/4”
101904101916101928
2535-B1/4”1”
101930101941101953
2535-C1/4”
1 1/4”101965101977101989
2535-E5/16”
1”101990102003102015
25363/8”5/8”
102027102039102040
25371/2”7/8”
102118102120102131
2537-A5/8”1”
102143102155102167
25387/8”
1 1/4”102234102246102258
FileHead DiameterHead LengthStandard CutCoarse CutFine Cut
25611/4”1/2”
102260102283102295
25621/4”3/4”
102313102325102337
25633/8”5/8”
102349102350102362
25643/8”3/4”
102374102386102398
25651/2”3/4”
102404102416102428
25661/2”1”
102430102441102453
25671/2”
1 1/8”102465102477102489
25685/8”1”
102490102507102519
25693/4”1”
102520102532102544
Rotary FilesHigh Speed Steel--Tree Pointed End--1/4” Shank
6
-
Rotary FilesCarbide--Cylindrical--1/4” Shank
Telephone 800–258–7162 or 603-332-9000Fax 1–603–332–8069
FileHead DiameterHead LengthStandard CutCoarse CutFine CutMetric
TC-01A1/8”1/2”
157004157016157028
-----
TC-01G5/32”5/8”
157030157041157053
-----
TC-01B3/16”5/8”
157065157089157090157066
TC-011/4”5/8”
157107157119157120271561
TC-02A5/16”3/4”
157132157144157156
-----
TC-023/8”3/4”
157168157170157193
-----
TC-02B7/16”
1”157200157211157223
-----
TC-031/2”1”
157235157247157259
-----
Metrics listed are standard cut.
FileHead DiameterHead LengthStandard CutCoarse CutFine CutMetric
TC-045/8”1”
157272157284157302
-----
TC-04G3/4”1/2”
157326157338157340
-----
TC-04A3/4”3/4”
157351157363157387
-----
TC-04B3/4”1”
157399157405157417
-----
TC-051”1”
157429157430157442
-----
7
-
Rotary FilesCarbide--Cylindrical Radius End--1/4” Shank
Telephone 800–258–7162 or 603-332-9000Fax 1–603–332–8069
Metrics listed are standard cut.
FileHead DiameterHead LengthStandard CutCoarse CutFine CutMetric
TC-06A1/8”1/2”
157454157466157478
-----
TC-06G5/32”5/8”
157480157510157533
-----
TC-06B3/16”5/8”
157545157569157582157546
TC-061/4”5/8”
157594157636157648157595
TC-07A5/16”3/4”
157650157661157673
-----
TC-073/8”3/4”
157685157697157703
-----
TC-07B7/16”
1”157715157727157739
-----
TC-081/2”1”
157740157752157764
-----
TC-095/8”1”
157788157790157806
-----
TC-09A3/4”1”
157818157831157843
-----
Rotary FilesCarbide--Ball--1/4” Shank
FileHead DiameterHead LengthStandard CutCoarse CutFine CutMetric
TC-101/8”1/8”
157855157867157879
-----
TC-113/16”3/16”
157880157892157909157881
TC-121/4”1/4”
157910157922157946157911
TC-135/16”5/16”
157958157960157971
-----
TC-143/8”3/8”
157983158008158010
-----
TC-14A7/16”7/16”
158021158045158057158022
TC-151/2”1/2”
158069158070158082
-----
TC-165/8”5/8”
158094158100158124
-----
TC-173/4”3/4”
158136158148158161
-----
TC-181”1”
158173158185158197
-----
8
-
Rotary FilesCarbide--Oval--1/4” Shank
Telephone 800–258–7162 or 603-332-9000Fax 1–603–332–8069
Metrics listed are standard cut.
9
FileHead DiameterHead LengthStandard CutCoarse CutFine CutMetric
TC-211/4”3/8”
158203158215158227158204
TC-223/8”5/8”
158239158252158264
-----
TC-23A1/2”7/8”
158276158288158290
-----
TC-245/8”1”
158306158318158331
-----
TC-253/4”1”
158355158367158379
-----
-
Metrics listed are standard cut.
Rotary FilesCarbide--Tree Radius End--1/4” Shank
Telephone 800–258–7162 or 603-332-9000Fax 1–603–332–8069
FileHead DiameterHead LengthStandard CutCoarse CutFine CutMetric
TC-26A1/8”1/2”
158409158410158422
-----
TC-26E1/4”5/8”
158434158446158550158435
TC-27A3/8”3/4”
158562158574158586
-----
TC-27B7/16”
1”158598158604158616
-----
TC-28A1/2”3/4”
158628158630158641
-----
TC-281/2”1”
158653158665158677
-----
FileHead DiameterHead LengthStandard CutCoarse CutFine CutMetric
TC-28C5/8”1”
158690158707158719
-----
TC-29B3/4”1”
158720158732158756
-----
TC-29A3/4”
1 1/4”158768158770158781
-----
TC-29D3/4”
1 1/2”158793158800158811
-----
10
-
Telephone 800–258–7162 or 603-332-9000Fax 1–603–332–8069
Metrics listed are standard cut.
Rotary FilesCarbide--Cone--1/4” Shank
11
FileIncluded AngleHead DiameterHead LengthStandard CutCoarse CutFine CutMetric
TC-3522°1/4”1/2”
158823158835158847158824
TC-35A14°1/4”3/4”
158859158860158884158858
TC-35B10°1/4”1”
158896158902158926
-----
TC-3628°3/8”5/8”
158938158940158951
-----
TC-3728°1/2”7/8”
158963158975158987
-----
TC-37A31°5/8”1”
158999159013159025
-----
-
Telephone 800–258–7162 or 603-332-9000Fax 1–603–332–8069
Rotary FilesCarbide--Chamfer--1/4” Shank
FileHead DiameterStandard CutCoarse CutFine Cut
Shape “T” 60 degree included angle
TC-34T1/4”
159244159256159268
TC-35T3/8”
159270159281159293
TC-36T1/2”
159300159311159323
TC-37T5/8”
159335159347159359
TC-38T3/4”
159360159372159384
TC-39T1”
159396159402159414
FileHead DiameterStandard CutCoarse CutFine Cut
Shape “W” 82 degree included angle
TC-34W1/4”
159426159438159440
TC-35W3/8”
159451159463159475
TC-36W1/2”
159487159499159505
TC-37W5/8”
159517159529159530
TC-38W3/4”
159542159554159566
TC-39W1”
159578159580159591
FileHead DiameterStandard CutCoarse CutFine Cut
Shape “S” 90 degree included angle
TC-34S1/4”
159062159074159086
TC-35S3/8”
159089159104159116
TC-36S1/2”
159128159130159141
TC-37S5/8”
159153159165159177
TC-38S3/4”
159189159190159207
TC-39T1”
159219159220159232
12
-
Telephone 800–258–7162 or 603-332-9000Fax 1–603–332–8069
Rotary FilesCarbide--Inverted Cone--1/4” Shank
Rotary FilesCarbide--Flame--1/4” Shank
13
FileIncluded AngleHead DiameterHead LengthStandard CutCoarse CutFine Cut
TC-4210°1/4”5/16”
159608159610159621
TC-4328°1/2”1/2”
159633159645159657
TC-4418°5/8”3/4”
159669159670159682
TC-4530°3/4”5/8”
159694159700159712
FileHead DiameterHead LengthStandard CutCoarse CutFine Cut
TC-525/16”3/4”
159724159736159748
TC-531/2”
1 1/4”159750159761159773
TC-545/8”
1 7/16”159785159797159803
TC-553/4”
1 5/8”159815159827159839
-
Telephone 800–258–7162 or 603-332-9000Fax 1–603–332–8069
Rotary FilesCarbide--Tree Pointed End--1/4” Shank
FileHead DiameterHead LengthStandard CutCoarse CutFine CutMetric
TC-621/4”5/8”
159840159852159864159841
TC-62A5/16”3/4”
159876159888159890
-----
TC-643/8”3/4”
160003160015160027
-----
TC-651/2”3/4”
160039160040160064
-----
TC-671/2”1”
160076160088160090
-----
TC-685/8”1”
160106160118160120
-----
TC-693/4”1”
160131160143160155
-----
TC-69A3/4”
1 1/2”160167160179160180
-----
Rotary FilesCarbide--Cone Radius End--14 degree angle--1/4” Shank
FileHead DiameterHead LengthStandard CutCoarse CutFine Cut
TC-74A1/4”5/8”
160192160209160210
TC-745/16”7/8”
160222160234160246
TC-753/8”
1 1/16”160258160260160271
TC-771/2”
1 1/8”160283160295160301
TC-785/8”
1 5/16”160313160325160337
TC-793/4”
1 1/2”160349160350160362
14
-
Telephone 800–258–7162 or 603-332-9000Fax 1–603–332–8069
FileIncluded AngleHead DiameterHead LengthStandard CutCoarse CutFine CutMetric
JA-1*---
1/8”9/16”
154805154829154830271329
JA-2*---
3/32”7/16”
154842154854154866271330
JA-8---
1/16”1/4”
154880154891154908271336
JB-1---
1/16”---
155019155020155032271524
JC-1*---
1/8”9/16”
155070155081155093271342
JC-2---
3/32”7/16”
155100155111155123271343
JD-1*---
1/8”---
155238155240155251271354
JD-2---
3/32”---
155263155275155287271536
Rotary FilesCarbide--1/8” Shank x 1 1/2” overall length
15
FileIncluded AngleHead DiameterHead LengthStandard CutCoarse CutFine CutMetric
JE-1*---
1/8”7/32”
155354155366155378271366
JH-1*---
1/8”1/2”
155445155457155469271378
JH-2*---
1/8”1/4”
155470155482155494271380
JK-1*---
1/8”1/4”
155561155573155585271391
JK-2---
1/8”5/16”
155603155615155627271548
JK-6---
1/8”3/8”
155639155640155652271399
JL-112°1/8”3/8”
155731155743155755271549
JL-214°1/8”7/16”
155767155779155780271550
FileIncluded AngleHead DiameterHead LengthStandard CutCoarse CutFine CutMetric
JL-3*7°
1/8”5/8”
155810155822155834271408
JM-160°1/8”---
155901155913155925
---
JP-1*---
1/8”1/4”
155937155949155950271410
JR-190°1/8”---
155998156012156024
---
JS-1*10°1/8”3/16”
156036156048156050271421
JS-210°
3/32”1/8”
156061156073156085271427
JU-4*8°
1/8”3/8”
156152156164156176271433
JU-58°
1/8”1/2”
156188156190156206271445
J1 Set* Files inthe set
156243------
271457
-
Rotary FilesCarbide--1/4” heads on 1/8” steel shanks
Telephone 800–258–7162 or 603-332-9000Fax 1–603–332–8069
Rotary FilesCarbide--1/4” heads on 3/16” steel shanks
16
FileIncluded AngleHead DiameterHead LengthStandard CutCoarse CutFine Cut
JA-51---
1/4”1/2”
154970154982155007
JB-51---
1/4”3/16”
155044155056155068
JC-51---
1/4”1/2”
155196155214155226
JD-51---
1/4”---
155329155330155342
JE-51---
1/4”3/8”
155410155421155433
JH-51---
1/4”1/2”
155536155548155550
JK-51---
1/4”1/2”
155690155718155720
JL-5122°1/4”1/2”
155871155883155895
JS-5110°1/4”1/4”
156127156139156140
J-2 Set
156279------
FileIncluded AngleHead DiameterHead LengthStandard CutFine Cut
JA-53---
1/4”1/2”
156437156439
JB-55---
1/4”3/16”
156449---
JC-52---
1/4”1/2”
156498---
JD-52---
1/4”7/32”
156541---
JE-52---
1/4”3/8”
156589---
JH-53---
1/4”1/2”
156632---
JK-52---
1/4”1/2”
156670156681
JL-5222°1/4”1/2”
156723156747
JS-5510°1/4”1/4”
156875---
J-3 Set
156917---
-
Telephone 800–258–7162 or 603-332-9000Fax 1–603–332–8069
Rotary FilesCarbide--1/4” Shank x 2” overall length
FileIncluded AngleHead DiameterHead LengthStandard CutCoarse CutFine CutMetric
TC-21---
1/4”3/8”
158203158215158227158204
TC-26E---
1/4”5/8”
158434158446158550158435
TC-62---
1/4”5/8”
159840159852159864159841
TC-35A14°1/4”3/4”
158859158860158884158858
TC-3522°1/4”1/2”
158823158835158847158824
TC-4210°1/4”5/16”
159608159610159621
---
J-4 Set
160374------
160375
FileIncluded AngleHead DiameterHead LengthStandard CutCoarse CutFine CutMetric
TC-01B---
3/16”5/8”
157065157089157090157066
TC-01---
1/4”5/8”
157107157119157120271561
TC-06B---
3/16”5/8”
157545157569157582157546
TC-06---
1/4”5/8”
157594157636157648157595
TC-11---
3/16”---
157880157892157909157881
TC-12---
1/4”---
157910157922157946157911
17
-
Telephone 800–258–7162 or 603-332-9000Fax 1–603–332–8069
Rotary FilesCarbide--5/32” and 3/16” heads on 1/8” steel shanks
Rotary FilesCarbide--3/32” shanks--1 1/4” overall length
FileIncluded AngleHead DiameterHead LengthStandard CutCoarse CutFine Cut
JH-22---
3/16”1/2”
155500155512155524
JK-22---
3/16”1/2”
155664155676155688
JL-2216°
3/16”1/2”
155846155858155860
JP-21---
3/16”3/8”
155962155974155986
JS-2210°
3/16”1/4”
156097156103156115
JU-2114°
3/16”1/2”
156218156220156231
J-5 Set
156309------
FileHead DiameterHead LengthStandard CutCoarse Cut
JA-413/32”5/16”
154647154659
JA-425/64”5/16”
154623154635
JA-431/16”1/4”
154600154611
JC-413/32”3/8”
154660154672
JD-413/32”
---154684154696
JL-413/32”5/16”
154702154714
JS-413/32”1/8”
154726154738
18
FileIncluded AngleHead DiameterHead LengthStandard CutCoarse CutFine Cut
JA-14---
5/32”1/2”
154910154921154933
JA-21---
3/16”1/2”
154945154957154969
JC-12---
5/32”1/2”
155135155147155159
JC-21---
3/16”1/2”
155160155172155184
JD-21---
3/16”---
155299155305155317
JE-22---
3/16”9/32”
155380155391155408