rp-24 series pharma reactors data sheet ds81-805a-1 · data sheet ds81-805a-1 ... 36" id jkt...
TRANSCRIPT
RP-24 Series Pharma ReactorsData Sheet DS81-805A-1
1/03 1M Mech No. 704
Copyright© Pfaudler, Inc. 2003 A Unit of Robbins & Myers, Inc. All rights reserved.Glasteel® is a registered trademark of Pfaudler, Inc.
1000 West AvenuePO Box 23600Rochester, NY 14692-3600Phone: 585 235 1000Fax: 585 235 6393www.pfaudler.com
1999 Mt. Read Blvd. PO Box 20857Rochester, NY 14602Phone: 585 235 1010Fax: 585 235 7923
The data and commentary presented herein are based on test information and field experience byPfaudler, Inc. They are believed to be reliable, but do not express or imply warranty or performanceguarantee. Since process conditions vary widely, Pfaudler, Inc. and Glasteel® Parts and Servicesexpressly disclaim in connection with the information contained herein any warranty, express, implied or statutory, including the warranty of fitness for a particular purpose and merchantability.
Optional Nozzle Configuration Specifications:Capacity (Gallons) 50
A 33-5/8"B 111-3/4"
Features:• Cryogenic capability
• Dished or flat top head
• Dished or conical bottom head
• Corrosion resistant, low maintenance exterior
• Available product sampling
• Available on-line infrared product monitoring
• Available CIP design and testing
• Available validation qualification documents
• ProSol® mixing systems including Pfaudler’s scalableimpellers and concave baffles
0°
90°
180°
270°
2"
56-7/8"
B
A
18"
15-7/16"
Face of 2" Nozzle
2" 2"
2"
24" ID
28" ID
36-3/4" OD
3"
4" EZ-Port withPlated Exterior
2-3/8" DriveNozzle
FlangeMounted
Baffle
VMX 150 Drivewith Contactingor Lift-Off GasBarrier Seals
Steel-It or FluoropolymerCoated Carbon SteelSurfaces
Calibration LinesPatentedClean Flange
4" Insulation& PolishedStainlessSheathing
Side Portfor ProductMonitoring
CL300Flanged JacketConnections
(3) Legs
DA
NG
ER
RP-32 Series Pharma ReactorsData Sheet DS81-805B-1
1/03 1M Mech No. 705
Copyright© Pfaudler, Inc. 2003 A Unit of Robbins & Myers, Inc. All rights reserved.Glasteel® is a registered trademark of Pfaudler, Inc.
1000 West AvenuePO Box 23600Rochester, NY 14692-3600Phone: 585 235 1000Fax: 585 235 6393www.pfaudler.com
1999 Mt. Read Blvd. PO Box 20857Rochester, NY 14602Phone: 585 235 1010Fax: 585 235 7923
The data and commentary presented herein are based on test information and field experience byPfaudler, Inc. They are believed to be reliable, but do not express or imply warranty or performanceguarantee. Since process conditions vary widely, Pfaudler, Inc. and Glasteel® Parts and Servicesexpressly disclaim in connection with the information contained herein any warranty, express, implied or statutory, including the warranty of fitness for a particular purpose and merchantability.
Optional Nozzle Configuration Specifications:Capacity (Gallons) 100
A 39"B 120-7/8"
Features:• Cryogenic capability
• Dished or flat top head
• Dished or conical bottom head
• Corrosion resistant, low maintenance exterior
• Available product sampling
• Available on-line infrared product monitoring
• Available CIP design and testing
• Available validation qualification documents
• ProSol® mixing systems including Pfaudler’s scalableimpellers and concave baffles
DANGER
PFAUDLER
PART NO.
PSI
90°
180°
270°
3"
3" 4"
3"
3"
60"
A
18"
B
Face of 3" Nozzle
32" ID VSL
36" ID JKT
45" ODSheathing
0°
14-1/2"
3"
8" EZ-Port withPlated Exterior
2-3/8" DriveNozzle
FlangeMounted
Baffle
VMX 150 Drivewith Contactingor Lift-Off GasBarrier Seals
Steel-It or FluoropolymerCoated Carbon SteelSurfaces
Calibration LinesPatentedClean Flange
4" Insulation& PolishedStainlessSheathing
Side Portfor ProductMonitoring
CL300Flanged JacketConnections
(4) Legs
RP-40 Series Pharma ReactorsData Sheet DS81-805C-1
1/03 1M Mech No. 706
Copyright© Pfaudler, Inc. 2003 A Unit of Robbins & Myers, Inc. All rights reserved.Glasteel® is a registered trademark of Pfaudler, Inc.
1000 West AvenuePO Box 23600Rochester, NY 14692-3600Phone: 585 235 1000Fax: 585 235 6393www.pfaudler.com
1999 Mt. Read Blvd. PO Box 20857Rochester, NY 14602Phone: 585 235 1010Fax: 585 235 7923
The data and commentary presented herein are based on test information and field experience byPfaudler, Inc. They are believed to be reliable, but do not express or imply warranty or performanceguarantee. Since process conditions vary widely, Pfaudler, Inc. and Glasteel® Parts and Servicesexpressly disclaim in connection with the information contained herein any warranty, express, implied or statutory, including the warranty of fitness for a particular purpose and merchantability.
Optional Nozzle Configuration Specifications:Capacity (Gallons) 200
A 46-7/8"B 143-1/8"
Features:• Cryogenic capability
• Dished or flat top head
• Dished or conical bottom head
• Corrosion resistant, low maintenance exterior
• Available product sampling
• Available on-line infrared product monitoring
• Available CIP design and testing
• Available validation qualification documents
• ProSol® mixing systems including Pfaudler’s scalableimpellers and concave baffles
DANGER
PFAUDLER
PSI
PART NO.
3"
0°
18"
18"
B
74-1/2"
A
3"4"
6"
3"
3"
4"
90°
180°
270°
Face of 3" Nozzle
40" ID VSL
44" ID JKT
53" ODSheathing
12" x 16" Glass-LinedManway Cover and
Protection Ring withEither a Plated orPolished Stainless
Steel Exterior
4-3/8" DriveNozzle
FlangeMounted
Baffle
VMX 250 Drivewith Contactingor Lift-Off GasBarrier Seals
Steel-It or FluoropolymerCoated Carbon SteelSurfaces
Calibration Lines
PatentedClean Flange
4" Insulation& PolishedStainlessSheathing
Side Portfor ProductMonitoring
CL300Flanged JacketConnections
(4) Legs
4" EZ-Port withPlated Exterior
RP-48 Series Pharma ReactorsData Sheet DS81-805D-1
1/03 1M Mech No. 707
Copyright© Pfaudler, Inc. 2003 A Unit of Robbins & Myers, Inc. All rights reserved.Glasteel® and Cryo-Lock® are registered trademarks of Pfaudler, Inc.
1000 West AvenuePO Box 23600Rochester, NY 14692-3600Phone: 585 235 1000Fax: 585 235 6393www.pfaudler.com
1999 Mt. Read Blvd. PO Box 20857Rochester, NY 14602Phone: 585 235 1010Fax: 585 235 7923
The data and commentary presented herein are based on test information and field experience byPfaudler, Inc. They are believed to be reliable, but do not express or imply warranty or performanceguarantee. Since process conditions vary widely, Pfaudler, Inc. and Glasteel® Parts and Servicesexpressly disclaim in connection with the information contained herein any warranty, express, implied or statutory, including the warranty of fitness for a particular purpose and merchantability.
Optional Nozzle Configuration Specifications:Capacity (Gallons) 300 500
A 49-1/4" 74-3/4"B 148-5/8" 175"
Features:• Cryogenic capability
• Dished or conical bottom head
• Corrosion resistant, low maintenance exterior
• Available product sampling
• Available on-line infrared product monitoring
• Available CIP design and testing
• Available validation qualification documents
• ProSol® mixing systems including Pfaudler’s family ofpatented Cryo-Lock® impellersand concave baffles
A
B
Face of 3" Nozzle
18"
23"
48" ID VSL
61" ODSheathing
52" ID JKT
3"
3"
6"
4"
3"
3"
6"
4"
3"
77-1/2" (300 GAL)78-3/8" (500 GAL)
180°
270°
0°
90°
14" x 18" Glass-LinedManway Cover and
Protection Ring withEither a Plated orPolished Stainless
Steel Exterior
4-3/8" DriveNozzle
FlangeMounted
Baffle
VMX 250 Drivewith Contactingor Lift-Off GasBarrier Seals
Steel-It or FluoropolymerCoated Carbon SteelSurfaces
CalibrationLines
4" Insulation& PolishedStainlessSheathing
Side Portfor ProductMonitoring
CL300Flanged JacketConnections(4) Legs
4" EZ-Port withPlated Exterior
PatentedClean Flange
RP-48 Series Pharma ReactorsData Sheet DS81-805E-1
1/03 1M Mech No. 708
Copyright© Pfaudler, Inc. 2003 A Unit of Robbins & Myers, Inc. All rights reserved.Glasteel® and Cryo-Lock® are registered trademarks of Pfaudler, Inc.
1000 West AvenuePO Box 23600Rochester, NY 14692-3600Phone: 585 235 1000Fax: 585 235 6393www.pfaudler.com
1999 Mt. Read Blvd. PO Box 20857Rochester, NY 14602Phone: 585 235 1010Fax: 585 235 7923
The data and commentary presented herein are based on test information and field experience byPfaudler, Inc. They are believed to be reliable, but do not express or imply warranty or performanceguarantee. Since process conditions vary widely, Pfaudler, Inc. and Glasteel® Parts and Servicesexpressly disclaim in connection with the information contained herein any warranty, express, implied or statutory, including the warranty of fitness for a particular purpose and merchantability.
Optional Nozzle Configuration Specifications:Capacity (Gallons) 300 500
A 33" 58"B 52-1/4" 77-1/4"C 140" 165-7/8"
Features:• Cryogenic capability
• Dished or conical bottom head
• Corrosion resistant, low maintenance exterior
• Available product sampling
• Available on-line infrared product monitoring
• Available CIP design and testing
• Available validation qualification documents
• ProSol® mixing systems including Pfaudler’s family ofpatented Cryo-Lock® impellersand concave baffles
0°
90°
180°
270°
Face of 3" Nozzle
18"
23"
3"
6"
3"
3"
B
C
69-3/4" (300 GAL)70-5/8" (500 GAL)
A
62 1/4" ODSheathing
4"
6"
4"
3"
3"
Tangent Line
54" OD JKT
48" ID VSL
14" x 18" Glass-LinedManway Cover and
Protection Ring withEither a Plated orPolished Stainless
Steel Exterior
4-3/8" DriveNozzle
FlangeMounted
Baffle
Tangent Line
Datum Line
VMX 250Drive withContacting orLift-Off GasBarrier Seals
Steel-It or FluoropolymerCoated Carbon SteelSurfaces
CalibrationLines
4" Insulation& PolishedStainlessSheathing
Side Portfor ProductMonitoring
CL300Flanged JacketConnections(4) Legs
4" EZ-Port withPlated Exterior
RP-60 Series Pharma ReactorsData Sheet DS81-805F-1
1/03 1M Mech No. 709
Copyright© Pfaudler, Inc. 2003 A Unit of Robbins & Myers, Inc. All rights reserved.Glasteel® and Cryo-Lock® are registered trademarks of Pfaudler, Inc.
1000 West AvenuePO Box 23600Rochester, NY 14692-3600Phone: 585 235 1000Fax: 585 235 6393www.pfaudler.com
1999 Mt. Read Blvd. PO Box 20857Rochester, NY 14602Phone: 585 235 1010Fax: 585 235 7923
The data and commentary presented herein are based on test information and field experience byPfaudler, Inc. They are believed to be reliable, but do not express or imply warranty or performanceguarantee. Since process conditions vary widely, Pfaudler, Inc. and Glasteel® Parts and Servicesexpressly disclaim in connection with the information contained herein any warranty, express, implied or statutory, including the warranty of fitness for a particular purpose and merchantability.
Optional Nozzle Configuration Specifications:Capacity (Gallons) 750 1000
A 52" 72"B 74-1/4" 94-1/4"C 165-7/8" 175-5/8"
Features:• Cryogenic capability
• Dished or conical bottom head
• Corrosion resistant, low maintenance exterior
• Available product sampling
• Available on-line infrared product monitoring
• Available CIP design and testing
• Available validation qualification documents
• ProSol® mixing systems including Pfaudler’s family ofpatented Cryo-Lock® impellersand concave baffles
0°
4"
270°
8"
4"
90°
6"
4"
4"
180°
6"
8"
C
18"
Face of 4" Nozzle
29"
4"
Datum Line
A
B
Tangent Line
60" ID VSL
66" OD JKT
74-1/4" ODSheathing
73-5/8" (750 GALLON)63-3/8" (1000 GALLON)
Tangent Line
18" Glass-LinedManway Cover and
Protection Ring withEither a Plated orPolished Stainless
Steel Exterior
4-3/8" DriveNozzle
FlangeMounted
Baffle
VMX 250 (750 Gallon)SRW 5035 (1000 Gallon)with Contacting or Lift-OffGas Barrier Seals
Steel-It or FluoropolymerCoated Carbon SteelSurfaces
Calibration Lines
4" Insulation& PolishedStainlessSheathing
Side Portfor ProductMonitoring
CL300Flanged JacketConnections
(4) Legs
4" EZ-Port withPlated Exterior
RP-78 Series Pharma ReactorsData Sheet DS81-805G-1
1/03 1M Mech No. 710
Copyright© Pfaudler, Inc. 2003 A Unit of Robbins & Myers, Inc. All rights reserved.Glasteel® and Cryo-Lock® are registered trademarks of Pfaudler, Inc.
1000 West AvenuePO Box 23600Rochester, NY 14692-3600Phone: 585 235 1000Fax: 585 235 6393www.pfaudler.com
1999 Mt. Read Blvd. PO Box 20857Rochester, NY 14602Phone: 585 235 1010Fax: 585 235 7923
The data and commentary presented herein are based on test information and field experience byPfaudler, Inc. They are believed to be reliable, but do not express or imply warranty or performanceguarantee. Since process conditions vary widely, Pfaudler, Inc. and Glasteel® Parts and Servicesexpressly disclaim in connection with the information contained herein any warranty, express, implied or statutory, including the warranty of fitness for a particular purpose and merchantability.
Optional Nozzle Configuration Specifications:Capacity (Gallons) 1500 2000
A 65" 84"B 92-1/2" 111-1/2"C 179" 198"
Features:• Cryogenic capability
• Dished or conical bottom head
• Corrosion resistant, low maintenance exterior
• Available product sampling
• Available on-line infrared product monitoring
• Available CIP design and testing
• Available validation qualification documents
• ProSol® mixing systems including Pfaudler’s family ofpatented Cryo-Lock® impellersand concave baffles
Datum Line
78" ID VSL
84" ID JKT
4"Face of 4" Nozzle
38"
68-1/2"
B
18"
C
4"
8"
270°
8"
4"
10"
8"
90°
6"
4"
180°
6"
0°
A
93-1/8" ODSheathing
24" Glass-LinedManway Cover andProtection Ring with
Either a Plated orPolished Stainless
Steel Exterior
4-3/8" DriveNozzle
FlangeMounted
Baffle
TangentLine
TangentLine
SRW 5035 Drive withContacting or Lift-OffGas Barrier Seals
Steel-It or FluoropolymerCoated Carbon Steel Surfaces
Calibration Lines
4" Insulation& PolishedStainlessSheathing
Side Portfor ProductMonitoring
CL300Flanged JacketConnections(4) Legs
4" EZ-Port withPlated Exterior
RP-96 Series Pharma ReactorsData Sheet DS81-805H-1
1/03 1M Mech No. 711
Copyright© Pfaudler, Inc. 2003 A Unit of Robbins & Myers, Inc. All rights reserved.Glasteel® and Cryo-Lock® are registered trademarks of Pfaudler, Inc.
1000 West AvenuePO Box 23600Rochester, NY 14692-3600Phone: 585 235 1000Fax: 585 235 6393www.pfaudler.com
1999 Mt. Read Blvd. PO Box 20857Rochester, NY 14602Phone: 585 235 1010Fax: 585 235 7923
The data and commentary presented herein are based on test information and field experience byPfaudler, Inc. They are believed to be reliable, but do not express or imply warranty or performanceguarantee. Since process conditions vary widely, Pfaudler, Inc. and Glasteel® Parts and Servicesexpressly disclaim in connection with the information contained herein any warranty, express, implied or statutory, including the warranty of fitness for a particular purpose and merchantability.
Optional Nozzle Configuration Specifications:Capacity (Gallons) 3000 4000
A 77" 109"B 110-1/2" 142-1/2"C 213-3/4" 251-1/2"
Features:• Cryogenic capability
• Dished or conical bottom head
• Corrosion resistant, low maintenance exterior
• Available product sampling
• Available on-line infrared product monitoring
• Available CIP design and testing
• Available validation qualification documents
• ProSol® mixing systems including Pfaudler’s family ofpatented Cryo-Lock® impellersand concave baffles
90°
180°
270°
B
18"
47"
4"
4"
12"
8"
6"
6"4"
8"
0°
4"
4"
4"
85-1/4" (3000 GAL)91" (4000 GAL)
C
10"
4"
A
96" ID VSL
102" ID JKT
111-1/8" ODSheathing
24" Glass-LinedManway Cover andProtection Ring with
Either a Plated orPolished Stainless
Steel Exterior
6" Drive Nozzle
FlangeMounted
Baffle
Datum Line
Face of 4" Nozzle
TangentLine
TangentLine
SRW 6045 Drive (3000 Gallon)SRW 7055 Drive (4000 Gallon) withContacting or Lift-Off Gas Barrier Seal
Steel-It Coated CarbonSteel Surfaces
Calibration Lines
4" Insulation& PolishedStainlessSheathing
Side Portfor ProductMonitoring
CL300Flanged JacketConnections
(4) Legs
4" EZ-Port withPlated Exterior