Rumba 2 Stage

Rumba 2 Stage Building on Rumba’s clean, simple, strong and bold design, Rumba 2 Stage now meets the increasing need to offer a sit to stand solution in office environments.

RUMBA 2 STAGE WORKSTATIONFEATURES Rumba ‘2 Stage’ Sit Stand Workstation, while maintaining its strong bold style, now incorporates ‘2 Stage’ telescopic legs. Range of height adjustment is 650 - 1310mm (full sit stand) with feet and pods without feet are 610 - 1270mm. These legs are available as electric and gas assist (counterbalanced and unpowered).Rumba ‘2 Stage’ is fast – the full range of electric adjustment in just 17 seconds. It is also quiet – the legs are electronically synchronised making the desks much quieter. Optional digital read out with three memory positions is also available.

FINISHESFrame: White Satin, Silver Grey, Black Matt (other colours on 16 week lead time)Accessories: Dulux standard colours (special colours upon request)Ctrl Plateau Screen Finish: Echo Panel, Fabric WrappedCtrl Monstera Screen Finish: Echo Panel Ctrl Incline Screen Finish: Echo Panel, Fabric WrappedS30 and S50 Screen Finish: Echo Panel, Fabric, Forbo Pinboard, Glass, Laminate, Perforated Metal, Plain Metal, Twin Wall Polycarbonate, Veneer, WhiteboardTops: Laminate, veneer (specials upon request)

CERTIFICATIONS

DESIGNZenith Design Studio

RUMBA 2 STAGE WORKSTATIONDESK LAYOUTS

LEG STYLES

HEIGHT RANGE

Rumba 2 Stage Workstation 90 degree

Rumba 2 Stage Workstation 120 degree

Rumba 2 Stage Workstation 180 degree

Standard Pod of 2

Standard Pod of 3

Pod of 2 T Shape Pod of 4 X Shape 3 End Left Hand 3 End Right Hand

Single Leg Single Leg With Foot

With Foot Height Range Without Foot Height Range

650

1310

610

1270

RUMBA 2 STAGE WORKSTATIONCARE & MAINTENANCE FABRICGently spot clean excess liquid from the fabric surface. Do not saturate or scrub the fabric with water or cleaning liquids. Every fabric composition varies and the individual fabric supplier should be contacted for further fabric care instructions.ECHO PANEL Remove dust and marks with a soft damp cloth and mild solutions of warm water and upholstery shampoo. Blot dry with a solution free soft damp cloth. FORBO PINBOARD Clean with a damp cloth or if necessary, with a brush using a neutral detergent. Rinse with clean water. The pinboard material is resistant to diluted acids, oils and most conventional solvents such as alcohol, white spirit. LAMINATEFor general cleaning use a soft clean cloth and a mild detergent in warm water. Wipe the surface gently to remove dust or marks. Always rinse after cleaning with fresh water to remove any remaining detergent. For heavier stains use a non-abrasive cleaner. Excessive scrubbing may damage the decorative surface, particularly a gloss finish.METAL For general cleaning use a soft clean cloth and a mild detergent in warm water. Wipe the surface gently to remove dust or marks. Always rinse after cleaning with fresh water to remove any remaining detergent. POWDER COATRemove loose deposits with a wet sponge (avoid scratching the surface by dry dusting). Use a soft clean cloth and mild detergent in warm water. Wipe the powdercoating to remove dust, salt or other deposits. Always rinse after cleaning with fresh water to remove any remaining detergent. In some cases, strong solvents recommended for thinning various types of paints and also for cleaning up are harmful to the extended life of the powder coated surface. These solvents should not be used for cleaning purposes. VENEERDust and wipe down the veneer surface regularly with a slightly damp soft cloth. Furniture polish recommended for the appropriate wood finish will remove soil and dust and provide a protective coating to guard against future spills. Polishing more than 3-4 times per year will see a buildup of cloudy film. Water or liquid spills should be wiped up immediately and avoid placing hot items directly on the veneer surface. TWIN WALL POLYCARBONATEMild soapy water and a soft clean cloth will sufficiently remove stubborn stains or markings. Make sure the detergent contains no abrasives or solvents. Pre wash with warm water and gently rub stains. Rinse with water to remove excess residue. WHITEBOARD Use a whiteboard duster for general erasing. For tough marks (ghosting) use a professional whiteboard cleaner and wipe with soap, water and a clean cloth afterwards. To prevent ghosting, the ink should be completely dry before erasing. Excessive smearing and smudging can occur if wet ink is attempted to be erased.