salice catalogo generale web - uk

12

Application with full overlay door

Application with half overlay door

Application with inset door

S = Thickness of the cabinet sideD = Required door overlayT = Door thicknessK = Drilling distanceA = RevealL = Gap between door and carcaseH = Height of the mounting plateG = Hinge constant

Whatever door overlay is required, you can select from ourrange the combination of both the type of hinge arm and thethickness of mounting plate necessary to solve your construc-tion problem and avoid the need to stock too many differentcomponents.

Abbreviations

S = Thickness of the cabinet sideT = Door thicknessK = Drilling distanceA = RevealL = Gap between internal face of door

and internal cabinet elements(e.g. shelves, drawers, etc.)

H = Height of the mounting plateG = Hinge constant

Whatever door overlay is required, you can select from ourrange the combination of both the type of hinge arm and thethickness of mounting plate necessary to solve your construc-tion problem and avoid the need to stock too many differentcomponents.

1-81 inglese 5-09-2006 17:04 Pagina 12

Explanatory notes

13

Simulation of the opening movement of a 110° hinge with full overlay door

Simulation of the opening movement of a 110° hinge with half overlay door

1-81 inglese 5-09-2006 17:04 Pagina 13

Sideways adjustment

14

Sideways adjustment of the door with Series 200, 100, Logica, B, 300, F and 400 hinges

Sideways adjustment of the door is made by using the indicated screw. It is possible to recover the gap behind the door (the initial “L” value of 0.7 mm) simply by using the assembly stop located on the underside of the hinge.

Sideways adjustment of the door with Series 800 hinges

Required sideways adjustment of the door is made by slackening the hinge fixing screw. It is possible to recover the gap behind the door (the initial “L” value 0.7 mm) simply byusing the assembly stop located on the underside of the hinge. Finally the fixing screw must be retightened.

Sideways adjustment of the door with Series 900 and 600 hinges

A specially developed technical solution allows the sideways adjustment of the door whilemantaining the gap behind the door (“L” value of 0.7 mm). The adjustment screw operates in conjunction with the inner leaf of the hinge arm. The door moves in only one direction -parallel to the carcase and without a gap developing between the door and the carcase. No further adjustments are necessary.

-1.5 + 4.5 mm (Series 200, 100, Logica, B)-0,5 + 5.5 mm (Series F and 400)-1.5 + 3 mm (Series 300)

-1.5 + 4 mm (Series 900)+ 5 mm (Series 600)

1-81 inglese 5-09-2006 17:04 Pagina 14

15

Depth adjustment

The hinge fixing screw is slackened and an oval slot on the arm of the hinge enables the doorto be adjusted frontally by + 2,8 mm. Finally the fixing screw must be retightened.

Traditional depth adjustment

The hinge fixing screw is slackened and an oval slot on the arm of the hinge enables the doorto be adjusted frontally from -1,5 mm to +3 mm. Finally the fixing screw must be retightened.

Traditional depth adjustment with Series 800 hinges

Depth adjustment is made without loosening any screws. The door can be moved frontally from -0,5 mm to +2,8 mm simply by rotating the cam adjuster in this range of mounting plates.

Depth adjustment with DOMI® snap-on mounting plates - Model BAV

1-81 inglese 5-09-2006 17:04 Pagina 15

Depth adjustment

16

Depth adjustment with Domi® snap-on mounting plates - Models BAPXR and BARXR -

Depth adjustment is made without loosening any screws. The door can be moved frontallyfrom -0,5 mm to +2,8 mm simply by rotating the cam adjuster in this range of mounting plates.

1-81 inglese 5-09-2006 17:04 Pagina 16

17

Height adjustment

Height adjustment is made without loosening any screws. The door can be moved vertically by ±2 mm simply by rotating the cam adjuster in this range of mounting plates.

Height adjustment with Domi® snap-on mounting plates - Models BAPXR and BARXR -

By loosening the two fixing screws it is possible to adjust the door vertically by ±2 mm. Theoval holes allow the mounting plate to slide freely in both directions. Finally, the screws mustbe retightened.

Height adjustment with Series 200 and Domi® snap-on mounting plates - Model BAV

Height adjustment is made without loosening any screws. The door can be moved vertically by ±2 mm simply by rotating the cam adjuster in this range of mounting plates.

Height adjustment with Series 200 hinges - Models B2RXE and B2PXE -

1-81 inglese 5-09-2006 17:04 Pagina 17

18

1-81 inglese 5-09-2006 17:04 Pagina 18

Series 200

27

Ser

ies

20

0 h

inge

s

1-81 inglese 5-09-2006 17:04 Pagina 27

28

The Series 200 make up an integrated system of hinges developed to provide a solution toany situation involving concealed hinges.Bright nickel plated steel cup and arm.Dimensions of the Ø 35 mm cup.

Constant «L» value of 0,7 mm (it does not change during sideadjustment).

Approx. number of hinges required according to the doordimension and weight

Adjustments

Mounting plates

Series 200Technical features

Width of the door Weight of the door (N)

Hei

ght

of t

he d

oor

Compensating side adjustment from -1,5 mm to +4,5 mm

Height adjustment ±2 mm

Depth adjustment with Series 200 mounting plates +2,8 mm

Depth adjustment with DOMI® snap-on mounting platesfrom -0,5 mm to +2,8 mm

Anti-sliding safety stop

Symmetrical and asymmetrical bright nickel plated steel ordie-cast Series 200 mounting plates

Snap-on assembly on DOMI® mounting plates

Positioning with pre-determined stop on traditional Series200 mounting plates

N.B. : Use POZIDRIVE No. 2 screwdrivers for all screws

1-81 inglese 5-09-2006 17:04 Pagina 28

29

Series 200Drillings and fixings

Ser

ies

20

0 h

inge

s

Wood screw

Premounted wood screw

Rapido

Dowel

Use this table to identify the available drillings and fixings. Fill the third position of the hinge code number with the letter or the number corresponding to your choice. I.e.: C2...7A99

Fill this position with the chosen letter or number.

1-81 inglese 5-09-2006 17:04 Pagina 29

30

For thick doors up to 32 mm, with special profiles

11 mm deep metal cup

94° opening

Possible drilling distance on the door (K): from 3 to 8 mm

Compatible with all traditional Series 200 mounting platesand with all DOMI® snap-on mounting plates

Technical information

Space needed to open the door

The above values are calculated on the assumption that the doors have square edges.They are reduced if the doors have radiussed edges.

Projection of the door

Projection of the door from the cabinet side at the max. opening. The figures are based on a straight arm hinge, H=0 mm thickness of mounting plate and K value = 3 mm.

With this formula you can obtain the max. thickness of themoulded door that can be opened without touching adjacentcarcase sides, doors or walls, whilst bearing in mind theabove L-K-T values.

T= 16 18 20 22 24 26 28 30 32

K=3 A= 0,4 0,8 1,2 1,7 2,4 3,2 4,5 6,3 8,1

K=4 A= 0,4 0,7 1,2 1,7 2,3 3,1 4,2 5,6 7,5

K=5 A= 0,4 0,7 1,1 1,6 2,3 3,0 3,9 5,3 7,0

K=6 A= 0,4 0,7 1,1 1,6 2,2 2,9 3,8 5,0 6,5

K=7 A= 0,4 0,7 1,1 1,6 2,1 2,8 3,7 4,7 6,1

K=8 A= 0,4 0,7 1,1 1,5 2,1 2,8 3,6 4,5 5,8

K= 3 4 5 6 7 8

L= 0,0 0,0 0,0 0,0 0,1 1,1

“C” value

C=22,5 + K + A

Series 200 94°

1-81 inglese 5-09-2006 17:04 Pagina 30

31

Arm 0CA C2…7A99CL C2...5A99

H= 15 + K - (D)

Arm 9CA C2...7G99CL C2...5G99

H= 6 + K - (D)

Use these formulas to determine the type ofhinge arm, the drilling distance “K” and the height of the mounting plate “H” which isnecessary to solve each application problem.

Arm 17CA C2...7P99CL C2...5P99

H= -2 + K + A

Arm 5CA C2...7D99CL C2...5D99

H= 10 + K - (D)

CA sprung hingeCL unsprung hinge

PackingBoxes 300 pcs.Pallets 7200 pcs.

Series 200 94°

Ser

ies

20

0 h

inge

s

Use the tables “Drillings and fixings” atpage 29 to complete the code number ofthe desired hinge.

1-81 inglese 5-09-2006 17:04 Pagina 31

32

When a greater opening angle is required.


110° opening









T= 16 17 18 19 20 21 22 23 24 25 26

K=3 A= 0,5 0,7 0,9 1,2 1,5 1,8 2,4 3,7 5,1 6,5 7,8

K=4 A= 0,5 0,7 0,9 1,2 1,5 1,8 2,1 2,7 4,1 5,5 6,8

K=5 A= 0,5 0,7 0,9 1,2 1,5 1,8 2,1 2,6 3,1 4,1 5,4

K=6 A= 0,5 0,7 0,9 1,2 1,5 1,8 2,1 2,5 3,0 3,5 4,4

T= 16 17 18 19 20 21 22 23 24 25 26

K=3 L= 0,0 0,0 0,0 0,0 0,2 0,5 0,8 1,1 1,4 1,7 1,9

K=4 L= 0,0 0,0 0,3 0,6 0,9 1,2 1,4 1,7 2,0 2,3 2,6

K=5 L= 1,1 1,3 1,6 1,8 2,1 2,3 2,6 2,9 3,1 3,4 3,6

K=6 L= 2,0 2,3 2,5 2,8 3,1 3,3 3,6 3,8 4,1 4,3 4,6

“C” value

C=20 + K+ A

Series 200 110°

1-81 inglese 5-09-2006 17:04 Pagina 32

33

Arm 0CA C2...6A99CL C2...4A99

H= 15 + K - (D)

Arm 5CA C2...6D99CL C2...4D99

H= 10 + K - (D)

Arm 9CA C2...6G99CL C2...4G99

H= 6 + K - (D)


Arm 17CA C2...6P99CL C2...4P99

H= -2 + K + A



Series 200 110°

Ser

ies

20

0 h

inge

s


1-81 inglese 5-09-2006 17:04 Pagina 33

36

Hinge with greater opening angle and reduced operating profile

11 mm deep die-cast cup

165° opening






T= 16 18 20 22 24 26 28

K=3 A= 0,0 0,0 0,0 0,7 2,7 4,6 7,9

K=4 A= 0,0 0,0 0,0 0,1 1,8 3,8 6,9

K=5 A= 0,0 0,0 0,0 0,1 1,2 3,0 5,9

K=6 A= 0,0 0,0 0,0 0,1 0,9 2,5 4,9

K=7 A= 0,0 0,0 0,0 0,1 0,7 2,0 3,9

K=8 A= 0,0 0,0 0,0 0,1 0,6 1,7 3,2

“C” value

For spaces with removable components.Opening with lateral door protrusionequal to 5,5 mm with a hinge with straight arm, H=0 mounting plate andK=3 mm.

Series 200 165°

1-81 inglese 5-09-2006 17:04 Pagina 36

37

Arm 0CA C2...FA99CL C2...EA99

H= 15 + K - (D)

Arm 5CA C2...FD99CL C2...ED99

H= 10 + K - (D)

Arm 9CA C2...FG99CL C2...EG99

H= 6 + K - (D)


To limit the opening of the hinge, see page203 chapter “Accessories”.

Arm 17CA C2...FP99CL C2...EP99

H= - 2 + K + A



Series 200 165°

Ser

ies

20

0 h

inge

s


1-81 inglese 5-09-2006 17:04 Pagina 37

43

Arm -30°CA C2...7W99

-30°

Arm -45°CA C2...7H99

-45°

The solution of assembly problems wheredoors are mounted at a positive or negativeangle requires the verification of drillingdistances by a practical trial. Please do nothesitate to consult our technical supportdepartment for assistance.


120° opening


Compatible with all traditional Series 200 mounting platesand with all Domi® snap-on mounting plates


CA sprung hinge


Series 200 complementary hinges

For wooden doors with negative angled assembly

Ser

ies

20

0 h

inge

s


1-81 inglese 5-09-2006 17:04 Pagina 43

44

Arm 15°CA C2...7Z99

15°

Arm 24°CA C2...7U99

24°

Arm 30°CA C2...7E99

30°



94° opening




CA sprung hinge



For wooden doors with positive angled assembly

1-81 inglese 5-09-2006 17:04 Pagina 44

45

Arm 30° CA C2...7T9930°

Arm 37°CA C2...7K99

37°

Arm 45°CA C2...7M99

45°

Arm 45° CA C2...7V9945°

Arm 45°CA C2...7M99AC

45°


For wooden doors with positive angled assembly

Ser

ies

20

0 h

inge

s


1-81 inglese 5-09-2006 17:04 Pagina 45

Ser

ies

20

0 h

inge

s

47

H = 0

Heights of mounting plates for every assembly

H = 9 H = 12

CA C2…7N99Crampon


94° opening


Compatible with all traditional Series 200 mounting plates,28x32 mm drilling.

NOT COMPATIBLE with DOMI® snap-on mounting plates


CA sprung hinge



Crampon hinges - For smaller spaces with 15x32 mm drilling


1-81 inglese 5-09-2006 17:04 Pagina 47

49

CA C2…7F99

H = 13 + K - (D)


94° opening


Compatible with all traditional Series 200 mounting plates.



CA sprung hinge



For fridge doors

Ser

ies

20

0 h

inge

s


1-81 inglese 5-09-2006 17:04 Pagina 49

50

11 mm deep die-cast cup

35 mm cup diameter

Opening angle of the first door 70°

Possible drilling distance on the door (K) : from 3 to 6 mm

Maximum thickness of the door with square edges: 23 mm.For thicker doors or doors with mouldings or with largeradiussed edges, please refer to our technical assistance.



CA C2...YA99

CA sprung hinge


Use these formulas to determine the height of mounting plate and drilling distance.

H*= 26 - T - KThe mounting plate heights that arenot standard are obtained with themounting plate of lower height + sideways adjustment.

Drilling distance:cruciform mounting plates = 47 – T

Drilling distance:longitudinal mounting plates = (31 – T) + 32

T

20

16

19

18

K

5

6

3

4

H

26 - 20 - 5 = 1 mm

26 - 16 - 6 = 4 mm

26 - 19 - 3 = 3 mm

26 - 18 - 4 = 5 (H = 4+1 mm adjustment)

Examples with doors with square edges

T= Thickness of the door with square edges


For corner cabinets


X

47 - 20 = 27 mm

47 - 16 = 31 mm

47 - 19 = 28 mm

47 - 18 = 29 mm

X

31 - 20 = 11 + 32 mm

31 - 16 = 15 + 32 mm

31 - 19 = 12 + 32 mm

31 - 18 = 13 + 32 mm

Inglese pag 50-51 6-09-2006 10:13 Pagina 1

51

C2AYA99 hinge movement and maximum opening width

Space required to accomodate the hinge

With Series 200 mountingplates

The maximum space required to accommodate the hinge is 52 mm with 16 mm thick doors. With thicker doorsthe amount of space required is reduced.

With DOMI® snap-on mounting plates

The maximum space required to accommodate the hinge with 16 mm thick doors is 64 mm with DOMI® mounting plates and 68 mm with mounting plates with back cam.With thicker doors the amount of space required is reduced.


For corner cabinets

Ser

ies

20

0 h

inge

s


C2A7H99B2V3B09/15

C2A7W99B2V3B09/15

C2A7W99B2V3BW9R/15

CFA7A99B2V3BW9/15

C2A7A99B2V3BW9R/15

C2A7A99B2V3BW9R/15

C2A7A99B2V3BW9S/15

C2A7Z99B2V3B09/15

C2A7U99B2V3B09/15

C2A7E99B2V3B09/15

C2A7K99B2V3B09/15

C2A7M99B2V3B09/15

C2A7M99B2V3BW9R/15

C2A7M99B2V3BW9/15

C2A7M99B2V3BW9S/15

52


Special angled assemblies

1-81 inglese 5-09-2006 17:04 Pagina 52

11

22

33

44

11

22

33

44

Traditional assembly with Series 200 mounting plates Assembly with DOMI® snap-on mounting plates

Locate the lugs on the mounting plate into the recesses beneath thearm.

Place the hinge onto the mounting plate. Push the hinge up tothe pre-determined stop under the hinge arm.

Tighten the fixing screw.

An «L» value of 0,7 mm between door and cabinet side is achieved on final assembly.

«Key hole» safety feature.

Gently rotate the door in the direction shown.

Then press lightly on the end of the arm to secure the catch.

To remove the hinge from the mounting plate, press gently in the places shown by the arrows.

53

Series 200 Assembly instructions

Ser

ies

20

0 h

inge

s

1-81 inglese 5-09-2006 17:04 Pagina 53

54

1-81 inglese 5-09-2006 17:04 Pagina 54

Series 900

95

Ser

ies

90

0 h

inge

s

82-160 inglese 5-09-2006 18:32 Pagina 95

96

Bright nickel plated steel cup and arm.Dimensions of the Ø 35 mm cup.

Approx. number of hinges required according to the doordimension and weight.

Adjustments

Mounting plates

Series 900Technical features


Hei

ght

of t

he d

oor

Side adjustment from -1,5 mm to +4 mm


Depth adjustment +2,5 mm


NOT COMPATIBLE with Series 200 mounting plates with negative height

N.B. : Use Pozidrive No. 2 screwdrivers for all screws

82-160 inglese 5-09-2006 18:32 Pagina 96

97

Series 900Drillings and fixings

Wood screw

Premounted euroscrew


Premountedrapid euroscrew

Rapido

Dowel

Ser

ies

90

0 h

inge

s

Use this table to identify the available drillings and fixings. Fill the third position of the hinge code number with the letter or the number corresponding to your choice. I.e.: C9...7C99


82-160 inglese 5-09-2006 18:32 Pagina 97

98

C=22,5 + K+ A

For thick doors (up to 32 mm) with special profiles


94° opening


Compatible with all traditional Series 200 mounting plates








T= 16 18 20 22 24 26 28 30 32

K=3 A= 0,4 0,8 1,2 1,7 2,4 3,2 4,5 6,3 8,1

K=4 A= 0,4 0,7 1,2 1,7 2,3 3,1 4,2 5,6 7,5

K=5 A= 0,4 0,7 1,1 1,6 2,3 3,0 3,9 5,3 7,0

K=6 A= 0,4 0,7 1,1 1,6 2,2 2,9 3,8 5,0 6,5

K=7 A= 0,4 0,7 1,1 1,6 2,1 2,8 3,7 4,7 6,1

K=8 A= 0,4 0,7 1,1 1,5 2,1 2,8 3,6 4,5 5,8

K= 3 4 5 6 7 8

L= 0,0 0,0 0,0 0,0 0,0 0,1

“C” value

Series 900 94°

82-160 inglese 5-09-2006 18:32 Pagina 98

99

Arm 0CA C9...7C99CL C9...5C99

H= 15 + K - (D)

Arm 5CA C9...7J99CL C9...5J99

H= 10 + K - (D)

Arm 9 CA C9...7L99CL C9...5L99

H= 6 + K - (D)


Arm 17CA C9...7S99CL C9...5S99

H= -2 + K + A



Series 900 94°

Ser

ies

90

0 h

inge

s


82-160 inglese 5-09-2006 18:32 Pagina 99

11

22

33

44

Traditional assembly with Series 200 mounting plates





102

Series 900Assembly instructions

82-160 inglese 5-09-2006 18:32 Pagina 102

For metal profiles

103

For

met

al p

rofil

es

82-160 inglese 5-09-2006 18:32 Pagina 103

104

Arm 0CA C2O6A99

Arm 5CA C2O6D99

Arm 9CA C2O6G99

Arm 17CA C2O6P99

Hinges for the Practical system have been developed for usewith special metal profiles. The particular fixing system doesnot require any profile working. The hinge can be thereforeassembled at any point of the frame.

105° opening



H= 15 + 6 - (D)

H= 10 + 6 - (D)

H= 6 + 6 - (D)

H= - 2 + 6 + A


CA sprung hinge

105°


106


Arm 30°CA C2O6E99

Arm 45°CA C2O6M99

CA Sprung hinge

30°

45°

Fixing moving component

Glass thickness:4 mm with gasket5 mm without gasket

Cover frame profile

complementary hingesFor positive angled assembly


Crampon

Crampon hinges – For cabinet sides with 37x32 mm standard drilling


105° opening




CA Sprung hinge

CA Sprung hinge


105° opening

Compatible with all traditional Series 200 mounting plates, 28x32 mm drilling

NOT COMPATIBLE with Domi® snap-on mounting plates


CA C2O6N99AC


CA C2O6N99

107

E min:61 mm for Series 200 mounting plates70 mm for Domi® snap-on mounting plates74 mm for Domi® snap-on mounting plateswith back cam

Crampon

Crampon hinges – For smaller spaces with 15x32 mm drilling

For

met

al p

rofil

es

complementary hinges

complementary hinges


109

Internal cover frame profileof moulded plastic

3 m lengths

D206AA3000

Internal cover frame profile offlat plastic

3 m lengths

D206AP3000

Internal cover frame profile ofmoulded plastic

3 m lengths

D206AR3000

Accessories for the frame assembly

D206BS5Corner connector with 2 fixingscrews for the frame assembly

PackingBoxes 600 pcs.

D206BS5LCorner connector with 4 fixingscrews for the frame assembly


D206HS5Additional corner connectorfor the frame assembly


D206LP3000Frame for doors, glass to be inserted

3 m lengths


D206AG3000Gasket for glass

3 m lengths


D206BL5Adapter for single flap doors,drawer frontals and specialapplications


For

met

al p

rofil

es





Assembly instructions

1) The profiles which make up the door arecut to length and the ends mitred at 45°.

2) Insert the corner connector into the profile,recess and fix it by means of its premountedscrew/screws. On large doors it is suggested to use theadditional corner connector (small picture).

3) Repeat the same operation on the otherprofiles which make up the door. The glasswill be applied before fixing the fourth andlast profile.

5) The hinge will be therefore at the exact position of the mounting plate on the cabinet side.

4) Fix the hinges to the mounting plates and then assemble them onto theframe. The operation does not require anywork on the door, as the hinge can be inserted at any point of the profile recess.

6) At this point it is sufficient to fix thehinge onto the profile by simply rotating thecams 90°.

110

82-160 inglese 5-09-2006 18:32 Pagina 110

7) Cut to length and mitre the internal framecover profile also.

8) Complete the preparation of the door byinserting the internal frame cover profilewith a simple pressure.

9) Where the hinges are located, cut theinternal frame cover profile at the position of the same hinges.

11) Internal frame cover profile, flat version.10) Internal frame cover profile, moulded version. 12) Hinges for the Practical system representthe most practical, quickest and elegant solution for all types of furniture.

111

For

met

al p

rofil

es

82-160 inglese 5-09-2006 18:32 Pagina 111

118

11

22

33

44

11

22

33

44


Locate the lugs on the mounting plate into the recesses beneath the arm.Place the hinge onto the mounting plate. Push the hinge up tothe pre-determined stop under the hinge arm.






To remove the hinge from the mounting plate, press gently in the pla-ces shown by the arrows.

For metal profilesAssembly instructions

82-160 inglese 5-09-2006 18:32 Pagina 118

119

Mini hinge Series

Min

i hi

nges

82-160 inglese 5-09-2006 18:32 Pagina 119

126

Series 600: compact, elegant, very strong mini hinge.Bright nickel plated steel cup and arm.Dimensions of the ø 26 mm cup.

Approx. number of hinges required accordingto the door dimension and weight

Adjustments

Mounting plates

Series 600 Mini hinge

Technical features

Side adjustment +5 mm.It is possible to recover the gap behind the door (the initial“L” value of 0,7 mm) simply by using the assembly stoplocated on the underside of the hinge.




Positioning with pre-determined stop on Series 200 traditio-nal mounting plates

NOT COMPATIBLE with Series 200 mounting plates with negative height

N.B. : Use Pozidrive No. 2 screwdrivers for all screws


Hei

ght

of t

he d

oor

82-160 inglese 5-09-2006 18:33 Pagina 126

127


Drillings and fixings

Wood screw


Premounted euroscrew

Dowel

Min

i hi

nges

Use this table to identify the available drillings and fixings. Fill the third position of the hinge code number with the letter or the number corresponding to your choice. I.e.: C6...7C99


82-160 inglese 5-09-2006 18:33 Pagina 127

128

C=16,5 + K+ A

11,5 mm deep metal cup

26 mm cup diameter

94° opening










T= 16 17 18 19 20 21 22 23

K=3 A= 0,4 0,7 0,9 1,3 2,0 2,9 3,8 4,7

K=4 A= 0,4 0,6 0,9 1,1 1,6 2,4 3,3 4,2

K=5 A= 0,4 0,6 0,8 1,1 1,4 2,0 2,8 3,6

K=6 A= 0,4 0,6 0,8 1,0 1,2 1,8 2,4 3,2

K=7 A= 0,4 0,6 0,8 0,9 1,2 1,5 2,2 2,8

K=8 A= 0,4 0,6 0,8 0,9 1,2 1,5 1,9 2,6

K= 3 4 5 6 7 8

L= 0,0 0,0 0,0 0,7 1,7 2,6

“C” value


82-160 inglese 5-09-2006 18:33 Pagina 128

129

Arm 0CA C6...7C99CL C6...5C99

H= 12,5 + K - (D)

Arm 9CA C6...7L99CL C6...5L99

H= 3,5 + K - (D)


Use the tables “Drillings and fixings” at page127 to complete the code number of the desired hinge.

Arm 17CA C6...7S99CL C6...5S99

H= - 4,5 + K + A




Min

i hi

nges

82-160 inglese 5-09-2006 18:33 Pagina 129

132

Hole diameter 26 mm

94° opening

For use with glass from 4 mm to 6 mm thickness

Possible drilling distance on the door (K): from 5,5 to 6,5 mm


NOT COMPATIBLE with Domi® snap-on mounting plates



Arm 0CA C6C7C39

H= 10 + K - (D)

Arm 9CA C6C7L39

H= 1 + K - (D)


CA sprung hinge

Arm 17CA C6C7S39

H= - 7 + K + A


For glass-doors

82-160 inglese 5-09-2006 18:33 Pagina 132

133

Hole diameter 26 mm

94° opening

For use with glass from 4 mm to 6 mm thickness

Possible drilling distance on the door (K):from 5,5 to 6,5 mm

Compatible with all traditional Series200 mounting plates


Technical informationPackingBoxes 300 pcs.Pallets 7200 pcs.

Arm 30°

CA C6C7E39

30°

Arm 45°CA C6C7M39

45°


CA sprung hinge

CramponCA C6C7N39

Crampon

H = 0

Applications with doors set at any angle between –7,5° to +70° are possible by combining the appropriate hinge andmounting plate.

To be use only with Series 200 mountingplates for traditional assembly and drilling28x32 mm.

H = 9 H = 12

Height of the mounting plates for every assembly


For glass doors with angled assembly

Min

i hi

nges

82-160 inglese 5-09-2006 18:33 Pagina 133

11

22

33

44

Traditional assembly with Series 200 mounting plates





134



82-160 inglese 5-09-2006 18:33 Pagina 134

135

Series B

Ser

ies

B h

inge

s

82-160 inglese 5-09-2006 18:33 Pagina 135

Series B for wooden doors

Technical features

138

Series B hinges provide a solution to a number of applications that feature mouldededge profiles or half-inlay doors.Dimensions of the 35 mm cup.

Approx. number of hinges required according to the doordimension and weight

Adjustments

Mounting plates

Compensated side adjustment from -1,5 mm to +4,5 mm



Depth adjustment with DOMI® snap-on mounting platesfrom -0,5 mm to +2,8 mm

Anti-sliding safety stop


Snap-on assembly on DOMI® mounting plates

Positioning with pre-determined stop on traditional Series200 mounting plates

N.B. : Use POZIDRIVE No. 2 screwdrivers for all screws


Hei

ght

of t

he d

oor


Series B for wooden doors


139

Wood screw

Ser

ies

B h

inge

s

Use this table to identify the available drillings and fixings. Fill the third position of the hinge code number with the letter or the number corresponding to your choice. I.e.: CB...2A99



Series B 110°

9 mm deep metal cup

110° opening





The above values are calculated onthe assumption that the doors havesquare edges.They are reduced if the doors haveradiussed edges.




T= 16 18 20 22 24 26 28

K=3 A= 0,0 0,0 0,0 0,0 0,3 1,4 20,7

K=4 A= 0,0 0,0 0,0 0,0 0,4 16,9 19,7

K=5 A= 0,0 0,0 0,0 0,0 0,5 15,9 18,7

K=6 A= 0,0 0,0 0,0 0,0 0,7 14,9 17,7

K=7 A= 0,0 0,0 0,0 0,0 11,3 13,9 16,7

K=8 A= 0,0 0,0 0,0 0,0 10,3 12,9 15,7

K=9 A= 0,0 0,0 0,0 0,0 9,3 11,9 14,7

K=10 A= 0,0 0,0 0,0 6,0 8,3 10,9 13,7

K=11 A= 0,0 0,0 0,0 5,1 7,3 9,9 12,7

K=12 A= 0,0 0,0 0,0 4,1 6,3 8,9 11,7

K=13 A= 0,0 0,0 1,4 3,3 5,3 7,9 10,7

K=14 A= 0,0 0,0 0,7 2,6 4,5 6,9 9,7

K=15 A= 0,0 0,0 0,2 2,0 3,8 5,9 8,7

K=16 A= 0,0 0,0 0,0 1,4 3,2 5,0 7,7

K=17 A= 0,0 0,0 0,0 1,0 2,7 4,4 6,7

K=18 A= 0,0 0,0 0,0 0,7 2,2 3,9 5,7

“C” value

C=5,5 + K+ A

140


Arm 0

CA CBA2A99

H= 1 + K - (D)

Use these formulas to determine the type ofhinge arm, the drilling distance “K” and theheight of the mounting plate “H” which isnecessary to solve each application problem.

CA sprung hinge


Series B 110°

141

9

Ser

ies

B h

inge

s


Series B

142

82-160 inglese 5-09-2006 18:33 Pagina 142

143

11

22

33

44

11

22

33

44


Locate the lugs on the mounting plate into the recesses beneath thearm.







To remove the hinge from the mounting plate, press gently in the placesshown by the arrows.

Series B Assembly instructions

Ser

ies

B h

inge

s

82-160 inglese 5-09-2006 18:33 Pagina 143

144

82-160 inglese 5-09-2006 18:33 Pagina 144

145

Domi® mounting plates

Dom

i®m

ount

ing

plat

es

82-160 inglese 5-09-2006 18:33 Pagina 145

146

● DOMI® snap-on mounting plates. For hinges Series 100, 200, Logica, F, 400 and B.

● Depth and height adjustment by cam

● 21+32 mm drilling


screw-on

Drilling ø5x11

H= 0 1 2 3 4 5 6

BAPGR

BAP7Rknock-in

Drillingø10x11,5

H= 0 1 2 3 4 5 6

BAP3Rscrew-onB 3,5 DIN 7983

H= 0 1 2 3 4 5 6

BAPMRscrew-on

Drillingø10x11,5

H= 0 1 2 3 4 5 6

Die-cast mounting plates Die-cast mounting plates



148

screw-on

Drilling ø5x7,5

H= 0 2 3 4 6

screw-on

Drilling ø5x11

H= 0 2 3 4 6

screw-onB 3,5 DIN 7983

H= 0 2 3 4 6

● Cruciform DOMI® snap-on mounting plates. For hinges Series 100, 200, Logica, F, 400 and B.

● Depth adjustment by cam

● 37x32 mm drilling


BAVGL/F

BAV3L/F

BAV4L/F

BAV7L/Fknock-in

Drilling ø10x10

H= 0 2 3 4 6

BAVML/Fscrew-on

Drilling ø10x11,5

H= 0 2 3 4 6

Steel mounting plates

screw-on

Drilling ø5x7,5

H= 0 2 3 4 6 9 12(c)

screw-on

Drilling ø5x11

H= 0 2 3 4 6 9 12(c)


H= 0 2 3 4 6 9 12(c)

BAVGE/F

BAV3E/F

BAV4E/F

BAV7E/Fknock-in

Drilling ø10x10

H= 0 2 3 4 6 9 12(c)

BAVME/Fscrew-on

Drilling ø10x11,5

H= 0 2 3 4 6 9 12(c)

Die-cast mounting plates


82-160 inglese 5-09-2006 18:34 Pagina 148

149

Traditional mounting plates

Trad

itio

nal m

ount

ing

plat

es

82-160 inglese 5-09-2006 18:34 Pagina 149


knock-in

Drilling ø10x10

H= 0 1 2 3

B2S7H


H= 0 1 2 3

B2S3H

screw-on

Drilling ø5x11

H= 0 1 2 3

B2SGH

B2S4Hscrew-on

Drilling ø5x7,5

H= 0 1 2 3

● Asymmetrical cruciform mounting plates. For hinges Series 100, 200, Logica, F, 400, 600, 900 and B.● For hinges series 800 use steel mounting plates only● 28x32 mm drilling


H= 0 3 6 9 12(c)

B2S3B

screw-on

Drilling ø5x11

H= 0 3 6 9 12(c)

B2SGB

Steel mounting plates Die-cast mounting plates

150


82-160 inglese 5-09-2006 18:34 Pagina 150

B2VLHscrew-on

Drillingø10x7,5

H= 0 2 3 4 6 9

B2VNH (see page 152)screw-on

H= 0 2 3 4 6 9

rapido

Drillingø10x11,5

H= 0 2 3 4 6 9

B2VRH


H= -2(s)0 2 3 4 6 9

B2V3H

B2VGH

B2V7Hknock-in

Drilling ø10x10

H= 0 2 3 4 6 9

● Symmetrical cruciform mounting plates. For hinges Series 100, 200, Logica, 800, F, 400, 600, 900 and B.● 37x32 mm drilling

● Height adjustment ± 2 mmATTENTION! Mounting plates with negative value can be used on D-G-P arms only


screw-on

Drilling ø5x7,5

H= 0 2 3 4 6 9

B2V4H

B2VMHscrew-on

Drilling ø10x10

H= 0 2 3 4 6 9

Steel mounting plates Steel mounting plates

B2VKH (see page 153)screw-on

Drillingø5x11,5

H= 0 2 3 4 6 9

screw-on

Drillingø3x3

H= 0 2 3 4 6 9

B2V1H (see page 153)

Drillingø5x11 ø5x7,5

151


screw-on

Drillingø5x11

H= -2(s)0 2 3 4 6 9

Trad

itio

nal m

ount

ing

plat

es

82-160 inglese 5-09-2006 18:34 Pagina 151

● Symmetrical cruciform mounting plates. For hinges Series 100, 200, Logica, F, 400, 600, 900 and B.

● 37x32 mm drilling● Height adjustment ±2 mmATTENTION! Mounting plates with negative value can be used on D-G-P arms only



H= -1(R) 0 2 3 4 6 9 12(c)18(v)

B2V3B

B2VNH

screw-on

Drilling ø5x11

H= -1(R) 0 2 3 4 6 9 12(c)18(v)

B2VGB B2V7Bknock-in

Drilling ø10x10

H= -1(R) 0 2 3 4 6 9 12(c)

screw-on

Drilling ø5x7,5

H= -1(R) 0 2 3 4 6 9 12(c)18(v)

B2V4BDie-cast mounting plates Die-cast mounting plates

● Symmetrical cruciform mounting plates. For hinges Series 100, 200, Logica, 800, F, 400, 600, 900 and B.

● Easy height adjustment ±2 mm

● One only expandable dowel. It makes easier the centering in the holes on the side of the furniture

● It is available both for single and for twin applications

The mounting plate is supplied with premountedscrews, ready to be fixed to the cabinet side.37x32 mm drilling.

Tighten both screws to fix the mountingplate to the cabinet side.

To adjust the height of the door, loosen only the hex-head screw shown by the arrow. Adjust as required.

After adjustment, re-tighten the same screw.

+2

Assembly

Adjustment

-2

152

Traditional mounting platesTwin applications


82-160 inglese 5-09-2006 18:34 Pagina 152

B2VKHscrew-on

Drillingø5x11,5

H= 0 2 3 4 6 9

screw-on

Drillingø3x3

H= 0 2 3 4 6 9

B2V1H

● Symmetrical cruciform mounting platesFor hinges Series 100, 200, Logica, 800, F, 400, 600, 900 and B

● 37x32 mm drilling● Easy height adjustment ±2 mm


Steel mounting plates Steel mounting plates

The mounting plate is supplied withpremounted screws, ready to befixed to the cabinet side.37x32 mm drilling.

Tighten both screws to fixthe mounting plate to thecabinet side.

To adjust the height of the door,loosen only the hex-head screwshown by the arrow. Adjust asrequired.

After adjustment, re-tighten the same screw.

+2

Assembly

Adjustment

-2

knock-in

Drilling ø10x11,5

H= 0 2 3

B2P7Escrew-onB 3,5 DIN 7983

H= 0 2 3 4 6 9

B2R3E

screw-on

Drillingø5x11

H= 0 2 3 4 6 9

B2RGE B2R7Eknock-in

Drillingø10x11,5

H= 0 2 3

● Straight and cruciform mounting plates

For hinges Series 100, 200, Logica, F, 400, 600, 900 and B● Height adjustment ±2 mm by cam

Packing heigths 0, 2, 3, 4Boxes 600 pcs.Pallets 14400 pcs.

Packing heigths 6, 9Boxes 300 pcs.Pallets 7200 pcs.

Straight die-cast mounting plates Cruciform die-cast mounting plates

Cruciform die-cast mounting plates

153

Traditional mounting platesEasy height adjustment


Trad

itio

nal m

ount

ing

plat

es

82-160 inglese 5-09-2006 18:34 Pagina 153


B2V3BW9R

screw-on

Drilling ø5x11

B2VGBW9R

● Variable die-cast mounting plates for angled assembly from -7,5° to +7,5° and intermediate degrees,

for special assemblies. For hinges Series 100, 200, Logica, F, 400, 600, 900 and B.

● An almost infinite variety of angle door applications is possible using variable-angle mounting plates in conjunction with one of Salice’s range of angled-arm hinges.


The drilling distance of the variable-angle mounting plates differs with the angle to beused. The following are some examples:

154


82-160 inglese 5-09-2006 18:34 Pagina 154

screw-on

Drillingø 5x11

B2VGBW9

● Die-cast angled mounting plates for assembly at 15°For hinges Series 100, 200, Logica, F, 400, 600, 900 and B


screw-onB3,5 DIN 7983

B2V3BW9

screw-on

Drillingø 5x11

B2VGBW9S

● Variable die-cast mounting plates for angled assembly from +10° to +30° and intermediate degrees, for special assemblies. For hinges Series 100, 200, Logica, F, 400, 600, 900 and B.

● An almost infinite variety of angle door applications is possible using variable-angle mounting plates in conjunction with one of Salice’s range of angled-arm hinges.


screw-onB3,5 DIN 7983

B2V3BW9S

155



Trad

itio

nal m

ount

ing

plat

es

82-160 inglese 5-09-2006 18:34 Pagina 155

Angled mounting plates for assembly at 15°

Variable-angle mounting plate for angled assembly from +10° to +30° and intermediate angles by adjusting the set screw indicated

● Die-cast mounting plates for special assemblies

For hinges Series 100, 200, Logica, F, 400, 600, 900 and B● An almost infinite variety of angle door applications is possible using variable-angle mounting plates in

conjunction with one of Salice’s range of angled-arm hinges; from -45° to +70°.

Variable-angle mounting plate for angled assembly from +7,5° to -7,5° and intermediate angles by adjusting the set screw indicated

Assembly example with a 105° angle

Assembly examples from 100° to 120° angles.

Assembly examples from 82,5° to 97,5° angles

T

156


82-160 inglese 5-09-2006 18:34 Pagina 156

Smove

159

Sm

ove

82-160 inglese 5-09-2006 18:34 Pagina 159

Smove

D005SNG

PackingBoxes 250 pcsCartons 2000 pcs

Smove

D005SNB

Packing Boxes 250 pcsCartons 2000 pcs

Technical information about the installation of SMOVE D005SN to be recessed

Insert Smove D005 into thecabinet side opposite the hinges. For an optimal performance,we suggest that SmoveD005 is positioned at thecentre of the side panel.

It is suggested for doorsfrom 450 mm to 600 mmwidth.

For wood-based and alu-framed doors over 1600 mm height, it may be necessary to use twoSmove, one to be insertedinto the upper part and thesecond into the lower part of the cabinet side opposite the hinges.

Smove D005SN

160

82-160 inglese 5-09-2006 18:34 Pagina 160

Sm

ove

165

Drill a hole Ø 10 mm and min. 50 mm depth in the cabinet.Insert Smove into the hole.

Smove to be recessedInstallation of Smove to be recessed

161-208 Inglese 6-09-2006 9:35 Pagina 165

D064SNXR

D064SNGR = D064SNBR =

D063SNXR


D064SNXN

D064SNGN = D064SNBN =

D060SNXN


Sm

ove

167


D060SNXR

Plastic adapter forSmove D005, D006 and D008To be fixed with woodscrew37x32 mm drillingWithout assembly stop device

D065SNGR = grey - To be fixed with euroscrew D065SNBR = beige - To be fixed with euroscrew

PackingCartons 500 pcsPallets 12000 pcs

Longitudinal plastic adapter forSmove D005, D006, D008,D009 e D010To be fixed with dowels Without assembly stop device


Plastic adapter forSmove D005, D006 and D008To be fixed with woodscrew37x32 mm drillingWith assembly stop device


Plastic adapter forSmove D005, D006 and D008To be fixed with woodscrew28x32 mm drillingWith assembly stop device


Adapters to be screw fixed on the cabinet

Plastic adapter forSmove D005, D006 and D008To be fixed with woodscrew28x32 mm drillingWithout assembly stop device


greybeige

greybeige

greybeige

greybeige

greybeige

161-208 Inglese 6-09-2006 9:35 Pagina 167

Sm

ove

169

Adapters to be screw fixedon the cabinetSmove application with adapter to be screw fixed on the cabinet

Adapter with assembly stop deviceInsert Smove into the adapter. Place the adapter in the position in the cabinet appropriate to the version of Smove to be installed, using the assembly stop device for final positioning.

Adapter without assembly stop deviceInsert Smove into the adapter. Place the adapter in the position in the cabinet appropriate to the version of Smove to be installed, based on the dimensions indicated for the type of adapter.

161-208 Inglese 6-09-2006 9:35 Pagina 169

174

161-208 Inglese 6-09-2006 9:36 Pagina 174

175

Sliding system for Concertina doors

Slid

ing

syst

em f

orC

once

rtin

a do

ors

161-208 Inglese 6-09-2006 9:36 Pagina 175

176

The Salice system for Concertina-doors has been designed to open both doors on one side only, giving good access to the interior of the cabinet. Space taken up by the door in the maximum open position is reduced to a minimum (approximately 80 mm).

A nylon strip is available in orderto prevent insertion of objects or fingers between doors. This alsomakes the system dustproof.

To ensure that the door closes fully and securely,particularly when there is some curvature ofthe door, a locating device is available.

Sliding system for Concertina doorsTechnical features

161-208 Inglese 6-09-2006 9:36 Pagina 176

177

Adhesive finger-protection stripF1SBA1 whiteF1SBA3 blackF1SBAY neutral

F1RFAY Locating device for door

F1PVAY Long sliding block

F1PXAY Sliding blockF1C169 Hinge for sliding block

F1CZ69 For aluminium framed doors

F1CXE9screw-on

F1C0E9knock-inDowels Ø 8x11,5

For aluminium framed doors

Central hinge

Sliding system for Concertina doorsElements of the system

F1CO69 D206BK5Hinge for the Practical systemof aluminium framed doors

Central hinge for the Practicalsystem of aluminium frameddoors

Slid

ing

syst

em f

orC

once

rtin

a do

ors

161-208 Inglese 6-09-2006 9:36 Pagina 177

178

+2 mm -2 mm

+2,5 mm

Calibrated height adjustment

Depth adjustment

Height adjustment of hinges assembled with the sliding components is achieved through a cam.Through this alignment a parallel movement of the component in the track is achieved. The result is a smooth movementwithout any binding.Attention! The sliding block does not have a load-bearing function. Therefore it must slide freely inside the track.

Depth adjustment of the hinges mounted on the sliding component is achieved through the fixing screw of the same hinge.Depth adjustment should be made in conjunction with the hinges mounted on the opposite door.This adjustment is useful to keep the “L” value constant all along front of the furniture.

Sliding system for Concertina doorsAdjustments

161-208 Inglese 6-09-2006 9:36 Pagina 178

179

F1GIA1…………

F1GIA3…………

F1GIAG…………

F1GIAP…………

F1GFA1…………

F1GFA3…………

F1GFAG…………

F1GFAP…………

Slid

ing

syst

em f

orC

once

rtin

a do

ors

Colours

white

black

grey

beige

Mount the hinges of the fixed door on tothe mounting plates on the cabinet side.We recommend the use of Salice hingepart number C2A6A99 with BAR3Rmounting plate or similar.

Assembly

Position the sliding block inside thetrack by rotating it 90°.

Lock the sliding block into position by turning the marked in red lever.

barb-fixed screw-on B 3,5 DIN 7982

Standard lengths available: 590 mm, 880 mm, 1180 mm. Non-standard lengths can be supplied subject to a minimum order quantity of 900 pieces. The required length should be expressed in millimetres in the last four digits of the product code occupied by the dashes.


161-208 Inglese 6-09-2006 9:36 Pagina 179

180

Drilling distances without finger-protection strip

Drilling distances with finger-protection strip

Central assembly:Narrow part to be mounted on the door which is fixed to the cabinet side.Wider part to be mounted on the moving door.


To facilitate the assembly of the doors on the cabinet, it is preferable to premount all the hinges.


Sliding system for Concertina doorsApplication into the top and doorsSolution with plastic track barb-fixed or screw-fixed

161-208 Inglese 6-09-2006 9:36 Pagina 180

182

Sliding system for Concertina doorsApplication into the top and doorsSolution with barb-fix and screw-fix plastic track

Glass doors with the Practical system of aluminium framed doorsDistance to be used when finger-protection strip and two-screw (D206BS5) or four-screw (D206BS5L) corner joint are used.

Glass doors with the Practical system of aluminium framed doorsDistance to be used when finger-protection strip and four-screw corner joint (D206BS5L) are used.





161-208 Inglese 6-09-2006 9:36 Pagina 182

183

F1C169

F1PXAY

F1CXE9

F1COE9

F1RFAY

F1CZ69

F1CA69

F1PVAY

F1C069

F1C169

F1PXAY

F1CXE9

F1GFA……

.

F1KFX3X880

F1KFX 3 X880X590 = 590 mmX880 = 880 mm1180 = 1180 mm

300

300

600

600

300

300

300

300

300

200

75

150

7200

7200

14400

14400

7200

7200

7200

7200

7200

25

25

75

25

pcs.

pcs.

pcs.

pcs.

pcs.

pcs.

pcs.

pcs.

pcs.

m

pcs.

pcs.

pcs.

pcs.

pcs.

pcs.

pcs.

pcs.

pcs.

pcs.

pcs.

Components of the system Boxes Pallets

Adhesive finger-protection strip

Tracks 880 mm - 1180 mm

Tracks 590 mm

pcs.

pcs.

pcs.

pcs.


Packaging (standard packaging)

KIT- Packaging

Code number composition (example):

Track colour code number:1 = White3 = BlackG = GreyP = Beige

Part of code number identifying system forConcertina doors

Slid

ing

syst

em f

orC

once

rtin

a do

ors

Available in 3 lengths

and 4 colours

Track length code number:

161-208 Inglese 6-09-2006 9:36 Pagina 183

200

161-208 Inglese 6-09-2006 9:37 Pagina 200

201

Connecting fittings

Con

nect

ing

fitt

ings

161-208 Inglese 6-09-2006 9:37 Pagina 201

202

Simple nylon connecting fittingwith cover cap for lever, knock-in

G98YA15 white colour G98YAG5 grey colour G98YA3V black colour G98YAUV brown colour

Cover cap for lever

S98X83A1Y white colour S98X83AGY grey colour S98X83A3Y black colour S98X83AUY brown colour

Drilling pattern

Flush assembly with internal fitting

Flush assembly with external fitting


Simple nylon connecting fitting, knock-in

G98XA15 white colour G98XAG5 grey colour G98XA3V black colourG98XAUV brown colour


Connecting fittings Single fitting

Drilling pattern

161-208 Inglese 6-09-2006 9:37 Pagina 202

203

All versions of the connecting fittings are available in the following standard colours:

Insertion tool for connecting fittings

D98XAX3PEfor fittings G98X-G98Y

Connecting fittings

Con

nect

ing

fitt

ings

161-208 Inglese 6-09-2006 9:37 Pagina 203

204

1231

AssemblyInsert the connecting fitting in one of the two panels to be connected.Introduce the threaded part of the connecting fitting into the hole on the second panel, taking care that thelever is in the raised, open position.

Bring the two panels together and turnthe lever all the way down.

While rotating, the threaded part pullsthe two panels together, joining them in asecure way. The metal thread is drivenfirmly into the inner walls of the 10 mmhole.

DisassemblyReturn the lever to the open position.Separate the two elements. Nothingremains inserted in the 10 mm hole.

Connecting fittingsSingle fitting - Assembly and disassembly instructions

161-208 Inglese 6-09-2006 9:37 Pagina 204

205

Accessories

Acce

ssor

ies

161-208 Inglese 6-09-2006 9:37 Pagina 205

206

S6XX83C1S2XX83A1

S2BX83H9

S8XX83H9

S2MX83H9

S8CX83H9

S9CX83H9S9XX83C1

S9XX83H9

S6XX83C1Plastic screw cover cap withsymmetrical printed logo

For all Series 600 hinges

S6SX83C1 S6DX83C1Plastic screw cover cap withasymmetrical printed logo


Symmetrical plastic screw covercap, it can be personalised onrequest

For all Series 100, 200, Logica,F and 400 hinges

Symmetrical steel screw covercap, it can be personalised onrequest

For all Series 100, 200,Logica, F and 400 hinges

Symmetrical steel screw covercap, it can be personalised onrequest


Symmetrical steel screw covercap with embossed logo

For all Series 100, 200, Logica,F and 400 hinges




For all Series 900, F hinges andcomplementary hinges Series 200

Symmetrical plastic screw covercap, it can be personalised onrequest


Steel symmetrical screw covercap, it can be personalised onrequest


AccessoriesCover caps

161-208 Inglese 6-09-2006 9:37 Pagina 206

208

SFA586XG

S2A786XGS6A786XG

P2CTAX3 P2CBAX3

P2CTA13 P2CBA13

AccessoriesFancy covers for glass-door hinge cup

Spacer for hinges with 26 mmdiameter

To be used to reduce the cupdrilling depth by 1,5 mm.


To be used to reduce the cupdrilling depth by 1.5 mm.


To be used to reduce the cupdrilling depth by 1,4 mm.

Plastic, black Plastic, black

AccessoriesSpacers for hinges

Plastic, lacquered black Plastic, lacquered black

161-208 Inglese 6-09-2006 9:37 Pagina 208

209

P2CTAX1 P2CBAX1

P2CTA08 P2CBA08

P2CTAOW P2CBAOW

P2CTA06 P2CBA06

P2CTA09 P2CBA09

Plastic, white Plastic, white

Plastic, bright gold effect Plastic, bright gold effect

Plastic, gold effect Plastic, gold effect

Plastic, bright chrome

Plastic, silver effect

Plastic, bright chrome

Plastic, silver effect

Acce

ssor

ies

161-208 Inglese 6-09-2006 9:37 Pagina 209

Silentia

�

Silentia 2007 ediz. 04:SILENTIA 2007 ED 04 23-06-2008 9:17 Pagina 1

Silentia

2

Silentia, the hinge withdecelerating closing action,is technically revolutionary and aesthetically leading-edge. The decelerating system ishidden from view and combined with the hinge components;it does not alter the cabinet design and it confers high perceived value in both functional and aesthetic terms.

Silentia hinges retain the samefeatures as other Salice hingeswithout the deceleration system. They are compatible with alltraditional series 200 mounting plates and with allDomi snap-on mounting plates and have the same adjustment features and functional applications.

Silentia provides real solutions to those furniture producers who need to confer quality on their products by meansof range completeness, functionality with style and the concept of silent and smooth operation.


51

Series 700 hinges


52

Technical features Silentia - Serie 700

Bright nickel plated steel cup and arm.Dimensions of the Ø 35 mm cup.

Constant «L» value of 0,7 mm (it does not change during side adju-stment).

Approx. number of hinges required according to the door dimension and weight.


Hei

ght

of t

he d

oor

Adjustments.

Compensated side adjustment from -1.5 mm to +4.5 mm.Height adjustment ±2 mm.Depth adjustment with Series 200 mounting plates +2.8 mm.Depth adjustment with DOMI® snap-on mounting platesfrom -0.5 mm to +2.8 mm.Anti-sliding safety stop.

Mounting plates.

Symmetrical and asymmetrical bright nickel plated steel or die-cast Series 200 mounting plates. Snap-on assembly on DOMI® mounting plates.Positioning with pre-determined stop on traditional Series 200 mounting plates.

N.B. : Use POZIDRIVE No. 2 screwdrivers for all screws.


53

I J Q

7 2


Wood screw

Dowel

Rapido

Attention:It is essential to drill the door as specified for theperfect functioning of the hinge.

110° opening and complementary hinges

Logica

Use this table to identify the available drillings and fixings. Fill the third position of the hinge code number with the letteror the number corresponding to your choice. I.e.: C7...6AD9



54

S

A C

K

L

T

C

S

L

T

K

A

C=22.5 + K + A

T= 16 17 18 19 20 21 22 23 24 25 26

K=3 A= 0.7 0.9 1.1 1.3 1.6 1.9 2.2 2.6 3.2 4.4 5.7

K=4 A= 0.6 0.8 1.1 1.3 1.6 1.8 2.2 2.5 2.9 3.4 4.7

K=5 A= 0.6 0.8 1.0 1.3 1.5 1.8 2.1 2.4 2.8 3.2 3.7

K=6 A= 0.6 0.8 1.0 1.2 1.5 1.8 2.1 2.4 2.7 3.1 3.6

T= 16 17 18 19 20 21 22 23 24 25 26

K=3 L= 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.2 0.4 0.6 0.9

K=4 L= 0.0 0.0 0.0 0.3 0.5 0.7 0.9 1.1 1.4 1.6 1.8

K=5 L= 0.6 0.8 1.0 1.2 1.5 1.7 1.9 2.1 2.4 2.6 2.8

K=6 L= 1.5 1.8 2.0 2.2 2.4 2.7 2.9 3.1 3.3 3.6 3.8

Silentia - Series 700 - 110° opening

Technical information.

Hinges for min. 16 mm thick doors.13.5 mm deep cup.110° opening.Possible drilling distance on the door (K): from 3 to 6 mm.Compatible with all traditional Series 200 mounting platesand with all DOMI® snap-on mounting plates.

Space needed to open the door.

Projection of the door.


“C” value.

With this formula you can obtain the max. thickness of the moul-ded door that can be opened without touching adjacent carcase sides, doors or walls, whilst bearing in mind the above L-K-T values.



55

H= 15 + K - (D)

H= 6 + K - (D)

H= 10 + K - (D)

C7_6AD9

C7_6GD9

C7_6DD9

H= -2 + K + A C7_6PD9

Use these formulas to determine the type of hinge arm, the drilling distance “K” and the height of the mounting plate “H”which is necessary to solve each application problem.

Use the tables “Drillings and fixings” at page 53 to complete thecode number of the desired hinge.


Arm 0

Arm 9

Arm 5

Arm 17


60

H = 0 H = 9 H = 12

C7_6ND9

Silentia - Series 700 - Complementary hinges

Technical information.

Crampon hinges - For smaller spaces with 15x32 mm drilling.Hinges for min. 16 mm thick doors.13.5 mm deep cup.110° opening.Possible drilling distance on the door (K): from 3 to 8 mm.Compatible with all traditional Series 200 mounting plates, 28x32mm drilling.NOT COMPATIBLE with DOMI® snap-on mounting plates.

Use the tables “Drillings and fixings” at page 53 to complete thecode number of the desired hinge.


Heights of mounting plates for every assembly.


61

S2BX83H9 S2MX83H9

S2XX85H9 S2CX85H9

S2XF86 S2XX86

S2AF37X3 S2BF37XY

D247HSKSM

Stop device For 165° hinges, it limits opening at 120°.For 155° hinges, it limits opening at 125°.

Symmetrical steel screw cover cap, it can be personalised on request.

For all Series 100 and 200 hinges.

Symmetrical steel screw cover cap with embossed logo.

For all Series 100 and 200 hinges.

Steel flange cover cap withembossed logo.

Steel flange cover cap, it can be personalised onrequest.

Cup spacer to reduce the drilling depth for 155° and165° hinges.

S2XF86BT = 0.6 mmS2XF86AT = 1.2 mmS2XF86KT = 1.8 mm

Cup spacer to reduce the drilling depth for 94°, 105° and 110°.

S2XX86BT = 0.6 mmS2XX86AT = 1.2 mmS2XX86KT = 1.8 mm

Stop device For 165° hinges, it limits opening at 110°.For 155° hinges, it limits opening at 115°.

Cap cover for metal profile hinges.

Accessories


Push

�

Push 2007 Versione 6:Layout 1 23-06-2008 10:15 Pagina 1

2

PUSH

The PUSH-System is a self-opening system for the doors of all types of handlelessfurniture.

It consists of a series ofself-opening hinges, releasedevices (the PUSH) that can be fitted to the top, base or side panel of the cabinet, and retaining catches to be fitted to the back of the door.

The PUSH release device is available in a mechanical version that is fitted to the cabinet side using screws or adhesive strip, and a magneticversion that can be surface mounted using a holder or recessed into the edge of thecabinet.

The retaining catches can bepressure-fixed, screw-fixed or fitted with adhesive strip.

For doors over 1600 mm inheight, we suggest that youuse two mechanical releasecatches or a single magneticrelease device together with a supplementary magneticcatch.


3

DP3SNB

DP3SNG

DP3SN3

DP3SNBR

DP3SNGR

DP3SN3R

Mechanical release device to be screw-fixed

With assembly stop device.




- beige

- grey

- black




- beige

- grey

- black

Without assembly stop device.


4

PUSH

DP1SNB

DP1SNG

DP1SN3




- beige

- grey

- black

Installation of PUSH with adhesive system.

For correct application and to ensure optimal endurance, please follow the following procedure:

1) clean and degrease the cabinet sur face where the release device (PUSH) is to be installed using an acetone based cleaner;

2) remove the protective strip from the adhesive;

3) place the release device (PUSH) in position and apply a firm pressure for about oneminute;

4) allow a period of 12 hours to elapse before subjecting the PUSH-System to continuous usage.

- Mechanical release device with adhesive

With assembly stop device.


6

PUSH

DP29SNB DP29SNG DP29SN3

DP29SNBMC DP29SNGMC DP29SN3MC

DP29SNBI DP29SNGI DP29SN3I

DP29SNBR DP29SNGR DP29SN3R

- Retaining catches for wooden doors



- beige Retaining catch for woodendoor.Knock-in.

Retaining catch for wooden door and special assemblies.Knock-in.

- grey - black

- beige - grey - black



- beige Retaining catch for wooden door.With assembly stop device.Screw-on.

Retaining catch for wooden door.Without assembly stop device.Screw-on.

- grey - black


N.B.: Drilling patterns at page 11.


7

DP29SNBA DP29SNGA DP29SN3A

DP29SNBB DP29SNGB DP29SN3B

DP29SNBP DP29SNGP DP29SN3P

Retaining catches for aluminium-frame doors



- beige Retaining catch for aluminium-frame door width = 35 - 45 mm.

Retaining catch for aluminium-frame door width = 17 - 35 mm.

- grey - black

- grey - black


- beige Retaining catch for aluminium-frame door Practical.

- grey - black

N.B.: Drilling patterns at pages 12 and 13.

- beige


9

DP44XXBD DP44XXGD DP44XX3D

DP44XXBS DP44XXGS DP44XX3S

DP50SNO

Spacers and insertion tool for retaining catch



- beige Right spacer H = 4.8 mm.

Left spacer H = 4.8 mm.

- grey - black


Orange insertion tool for retaining catch DP29SNX.


11

P = 14.8 + AP1 = 36.8 + TP2 = P - 1.3P3 = P1 - 16.5

A = X-D+4.5P = X-D+10.8X min = D+8

A = 26-18+4.5 = 12.5P = 26-18+10.8 = 18.8X min = 18+8 = 26

16.5 28

11.5

1.3

Drilling for wooden doors

Full-overlay door.

D = Door overlay on side and top of the cabinet.Drilling distance of retaining catch = D + 8.

Special assemblies.

Inset door.

D = Door overlay on side and top of the cabinet.


13

16.5 28

11.5 Min. 2.5

S P 1.3

TD

Min. 61

16.5 28

11.5

S P

1.3

T

Min. 2.5

D

Min.77

Profile with corner connector D206BS5.

D = Door overlay on side and top of the cabinet.P = Fixing distance of release device = 61 (min) - D + 1.3.

Profile with corner connector D206BS5L.

D = Door overlay on side and top of the cabinet.P = Fixing distance of PUSH = 77 (min) - D + 1.3.


14

DPMB289 DPMG289 DPM3289

DPMB2891 DPMG2891 DPM32891

DPAB289 DPAG289 DPA3289

DPAB2891 DPAG2891 DPA32891

Retaining catch to be inserted.ø 11,5 mm.

Retaining catch with adhesive.ø 11,5 mm.

Release device.ø 10 mm, 40 mm length.

PackingBoxes 250 pcs.Cartons 1500 pcs.


Release device.ø 10 mm, 40 mm length.

PUSH - magnetic release device



Retaining catch to be inserted.ø 11,5 mm.

Retaining catch with adhesive.ø 11,5 mm.

Supplementary magneticcatch for doors over 1600mm in height.ø 10 mm, 40 mm length



Supplementary magneticcatch for doors over 1600mm in height.ø 10 mm, 40 mm length




15

DP80SNBR

DP85SNBR

DP84SNBR

DP82XXBR

DP80SNGR DP80SN3R

DP85SNGR

DP84SNGR

DP82XXGR

DP85SN3R

DP84SN3R

DP82XX3R

DP80SNB DP80SNG DP80SN3

DP83XXBR DP83XXGR DP83XX3R

Plastic adapter for release device.To be fixed with woodscrews.7.5x32 mm drilling.Without assembly stop devices.DP81SNXR = To be fixed with euroscrews.

Adjustable plastic adapter forrelease device. To be fixed with woodscrews.37x32 mm drilling.



Adjustable plastic adapter forrelease device. To be fixed with woodscrews.8x32 mm drilling.

Adjustable longitudinal plastic adapter for releasedevice. To be fixed with woodscrews.8+16 mm drilling.Screw cover to be orderedseparately.



Plastic adapter for release device.To be fixed with woodscrews.7.5x32 mm drilling.With assembly stop devices.DP81SNX = To be fixed with euroscrews.


Adjustable double plasticadapter for release device. To be fixed with woodscrews.8+32 mm drilling.Screw cover to be ordered separately.








Adapters


16

D

D

D+6

2.5

S

7.5

32

T

T

S

2.5

32

7.5

D

D

D+6

PUSH - Release device application

Release device application with adapter (DP80SN_R) with assembly stop devices.

Insert the release device into the adapter.Place the adapter to the top, the side or the base panel of the cabinet, using the assembly stop devices for final positioning.

Release device application with adapter (DP80SN_) without assembly stop devices.

Insert the release device into the adapter.Place the adapter to the top, the side or the base panel of the cabinet, using the drilling value 7.5x32 mm for final positioning.


18

2.5

5 26 Min.

10 Min.

8

32

26 Min

2.5

37

5

32 10 Min

Release device application with adapter (DP84SN_R) with assembly stop devices.

Insert the release device into the adapter.Place the adapter to the top, the side or base panel of the cabinet, using the assembly stop devices for final positioning.

Release device application with adapter (DP85SN_R) without assembly stop devices.

Insert the release device into the adapter.Place the adapter to the top, the side or base panel of the cabinet, using the drilling value of 37x32 mm for final positioning.

PUSH - Technical information - Release device application


19

1 2

T

S

ø 10

2.5

40 min

Retaining catch application.

1 - Retaining catch with adhesive.

Apply the retaining catch to the magnetic release device.Remove the protective strip from the adhesive.Close the door. In this way the retaining catch is positionedon the door.Reopen the door and apply a firm pressure to the retainingcatch to ensure a correct installation.

Attention:For a correct application and to ensure optimal endurance, we suggest these guidelines are followed:

1 - clean and degrease the door sur face where the retainingcatch is to be installed;2 - remove the protective strip from the adhesive;3 - place the retaining catch in position, in a place that is atroom temperature > 10° and apply a firm pressure for 10-15seconds.

After few seconds from the installation the retaining catch issuitable for the use. After 24h the max. hold is attained.

2 - Retaining catch to be inserted.

Apply the retaining catch to the magnetic release device.Close the door. The point of the retaining catch will show where to insert it.Reopen the door and press the retaining catch.

Application of the release device to be recessed.

Drill a hole Ø 10 mm and min. 40 mm depth in the top, the side or the base panel of the cabinet.Insert the release device into the hole.


21

Hinges Series 200


22

66

37

20.5

PUSH

The Series 200 make up an integrated systemof hinges developed to provide a solution to anysituation involving concealed hinges.Bright nickel plated steel cup and arm.Dimensions of the ø 35 mm cup.

Constant “L” value of 0.7 mm (it does not change during side adjustment).

Approx. number of hinges required according to the door dimension and weight


Heig

ht o

f th

e d

oor

Adjustments

Compensating side adjustment from - 1.5 to + 4.5 mm.Height adjustment ± 2 mm.Depth adjustment with Series 200 mounting plates + 2.8 mm.Depth adjustment with DOMI® snap-on mounting plates from - 0.5 mm to + 2.8 mm.Anti-sliding safety stop.

Mounting plates

Symmetrical and asymmetrical bright nickel plated steel or die-cast Series 200 mounting plates.Snap-on assembly on DOMI® mounting plates .

Positioning with pre-determined stop on traditional Series 200mounting plates.

N.B. : Use POZIDRIVE No. 2 screwdrivers for all screws.

- Series 200 hinges Technical features


23


Wood screw

Dowel

Use this table to identify the available drillings and fixings. Fill the third position of the hinge code number with the letter or the number corresponding to your choice. I.e.: C2...PA99


Rapido


24

PUSH

7.1 S

A C

K L

T

C

S

L

T

K

A

L min

A min

T= 16 17 18 19 20 21 22 23 24 25 26

K=3 A= 0.5 0.7 0.9 1.2 1.5 1.8 2.4 3.7 5.1 6.5 7.8

K=4 A= 0.5 0.7 0.9 1.2 1.5 1.8 2.1 2.7 4.1 5.5 6.8

K=5 A= 0.5 0.7 0.9 1.2 1.5 1.8 2.1 2.6 3.1 4.1 5.4

K=6 A= 0.5 0.7 0.9 1.2 1.5 1.8 2.1 2.5 3.0 3.5 4.4

T= 16 17 18 19 20 21 22 23 24 25 26

K=3 L= 0.0 0.0 0.0 0.0 0.2 0.5 0.8 1.1 1.4 1.7 1.9

K=4 L= 0.0 0.0 0.3 0.6 0.9 1.2 1.4 1.7 2.0 2.3 2.6

K=5 L= 1.1 1.3 1.6 1.8 2.1 2.3 2.6 2.9 3.1 3.4 3.6

K=6 L= 2.0 2.3 2.5 2.8 3.1 3.3 3.6 3.8 4.1 4.3 4.6

- Series 200 hinges - 110° Opening


When a greater opening angle is required.11 mm deep metal cup.110° opening.Possible drilling distance on the door (K): from 3 to 6 mm.Compatible with all traditional Series 200 mounting plates and with all DOMI® snap-on mounting plates.




“C” value

With this formula you can obtain the max. thickness of themoulded door that can be opened without touching adjacentcarcase sides, doors or walls, whilst bearing in mind the aboveL-K-T values.

C=20 + K+ A

The above values are calculated on the assumption that the doorshave square edges.They are reduced if the doors have radiussed edges.


25

H= 15 + K - (D)

H= 6 + K - (D)

H= -2 + K + A

H= 10 + K - (D)

C2...PA99

C2...PG99

C2...PP99

C2...PD99

Use these formulas to determine thetype of hinge arm, the drilling distance“K” and the height of the mounting plate“H” which is necessary to solve eachapplication problem.

Use the tables “Drillings and fix ings” at page 23 to complete the code number of the desired hinge.

PackingBoxes 300 pcs.Palletss 7200 pcs.

Arm 0

Arm 9

Arm 17

Arm 5


33

Hinges for metal profiles


34

H= 6 + 6 - (D)

H= -2 + 6 + A

H= 10 + 6 - (D)

C20PA99

C2OPG99

C2OPP99

C20PD99

H= 15 + 6 - (D)

PUSH


Hinges for the Practical system have been developed for use with special metal profiles. The particular fix ing systemdoes not require any profile working. The hinge can be therefore assembled at any point of the frame.105° opening.Compatible with all traditional Series 200 mounting plates and with all DOMI® snap-on mounting plates.


Arm 0

Arm 9

Arm 17

Arm 5

- 105° Opening


59

11

22

33

44

11

22

33

44L 0.7


Traditional assembly with Series 200 mounting plates.

Assembly with DOMI® snap-on mounting plates.



An «L» value of 0.7 mm between door and cabinet side is achieved on final assembly.


Locate the lugs on the mounting plate into the recesses beneath the arm.



To remove the hinge from the mounting plate, press gently in the places shown by the arrows.


salice catalogo generale web - uk

Documents