section 1 abrasive produk ebook

8/10/2019 Section 1 Abrasive Produk eBook

1/16


2/16www.krisbow.com Abrasive Product 1

Order No. Type Description

KW0300232 KW03-232 Flap Disc Aluminium Oxide 100 x 16mm #40




KW0300235 KW03-235 Flap Disc Zirconium Oxide 100 x 16mm #40



Features:Grain : aluminium oxide refined

Bonding : resin over resin

Version : flat form

Pattern : single tap

Backing : glass fibre reinforced

Features:

Grain : zirconium oxideBonding : resin over resin

Version : flat form

Pattern : single tap

Backing : glass fibre reinforced

Specification

Diameter x Bore in mm 100 x 16

Grit Sizes Available:

40

80 120

Max. Operating Peripheral Speed m/s 80

Max. Revolution Per Minute rpm 15,300

Packaging (Units/Pack) Units/pcs 10

KW03-235 KW03-236 KW03-237

KW03-232 KW03-233 KW03-234

#40 #80 #120

#40 #80 #120

ABRASIVE AND FINISHING PRODUCT

ABRASIVE FLAP DISC

ALUMINIUM OXIDE FOR STEEL, WOOD AND PLASTIC

ZIRCONIUM OXIDE FOR STEEL AND STAINLESS STEEL

Specification

Diameter x Bore in mm 100 x 16

Grit Sizes Available:

40 80

120

Max. Operating Peripheral Speed m/s 80

Max. Revolution Per Minute rpm 15300

Packaging (Quality/Pack) Units/pcs 10


3/16www.krisbow.comAbrasive Product2


FIBER AND PAPER DISC

CUTTING WHEEL

FIBER DISC ALUMINIUM OXIDE

PAPER DISC (ZINC STEARAT, ALUMINIUM OXIDE)

Specification KW03-270 KW03-271 KW03-272

Dimension mm 105 x 2 x 16 350 x 3 x 25.4 400 x 3 x 25.4

Dimension inch 4/7 x 5/64 x 5/8 14 x 1/8 x 1 16 x 1/8 x 1

Shape

Speed pm 13700 3900 3400

Cut. Speed m/s 72 72 72


KW0300270 KW03-270 Cut Off Wheel 105 x 2 x 16mm (4)

KW0300271 KW03-271 Cut Off Wheel 350 x 3 x 25.4mm (14)

KW0300272 KW03-272 Cut Off Wheel 400 x 3 x 25.4mm (16)

KW03-272KW03-270 KW03-271

Features:

General purpose disc for all metal cutting application Made from precious corundum

Medium hard bond for an optimal ratio between performance and disc life

CUT OFF WHEEL


KW0300032 KW03-32 Fiber Disc Aluminium Oxide 4 x 5/8 #A80

KW0300033 KW03-33 Fiber Disc Aluminium Oxide 4 x 5/8 #A120

Features:

General purpose disc for all metal grinding application

Medium hard bond for an optimal ratio between grinding performanceand disc life


KW0300035 KW03-35 Paper Disc Zinc Stearat 5 without Hole #180

KW0300036 KW03-36 Paper Disc Zinc Stearat 5 without Hole #240

KW0300037 KW03-37Paper Disc Aluminium Oxide 5

without Hole #60

Features:

General purpose disc for all metal grinding application Medium hard bond for an optimal ratio between grinding performance

and disc life





KW0300273 KW03-273Superthin Cutting Wheel

105 x 1 x 16mm (4)

Key points for best results

Hold your right angle grinder at 90o

for cutting or fluting

Run the cut-o wheel at the highest

possible speed marked on the

wheel

Features:

Super thin fast-cut cutting disc

Made of precious corundum The high-performance A60 range

for metals and stainless steel

Specification

Dimension mm 105 x 1 x 16

Dimension inch 4 x 1/24

x 5/8

Shape

Speed rpm 15300

Cut. Speed m/s 80

SUPERTHIN CUTTING WHEEL

KW03-273


KW0300278 KW03-278 Flexible Depressed Centre Wheel forMetal 102 x 3 x 16mm (4)

KW0300279 KW03-279Flexible Depressed Centre Wheel for

Stainless Steel 102 x 3 x 16mm (4)

KW0300280 KW03-280Flexible Depressed Centre Wheel for

Stone and Glass 102 x 3 x 16mm (4)

Key points for best results

Hold your right angle grinder at 15ofor curvaturesurface grinding

Run the cut-o wheel at the highest possible

speed marked on the wheel

Specification KW03-278 KW03-279 KW03-280

Dimension mm 102 x 3 x 16 102 x 3 x 16 102 x 3 x 16

Dimension inch 4 x 1/8x 5/8 4 x 1/8x 5/8 4 x 1/8x 5/8

Shape

Speed rpm 13700 13700 13700

Cut. Speed m/s 72 72 72

Features for KW03-280: Special discs for glass and stone

Made of silicon carbide

Features for KW03-278: Special discs for castings made of iron, steel,

non-ferrous metals and common metals

Made of aluminium oxide

KW03-278

Metal Stainless Steel

Features for KW03-279: Special discs for stainless steel

Made of semi precious and

corundum zirconium oxide

KW03-279 KW03-280

Stone and Glass

FLEXIBLE DEPRESSED CENTRE WHEEL




KW03-251KW03-252

Features: General purpose disc for all metal grinding

applications

Made from aluminium oxide

Medium hard bond. For an optimal ratio between

grinding performance and disc life


KW0300251 KW03-251Depressed Centre Wheel

150 x 6 x 22.2mm (6)

KW0300252 KW03-252Depressed Centre Wheel

180 x 6 x 22.2mm (7)

Specification KW03-251 KW03-252Dimension mm 150 x 6 x 22.2 180 x 6 x 22.2

Dimension inch 6 x 1/4 x7/8 7 x 1/4 x 7/8

Shape

Speed rpm 10,200 8,500

Cut. Speed m/s 80 80

DEPRESSED CENTER WHEEL

Features:

General purpose disc for all cast iron

material : FC, FCD

Made from aluminium oxide Custom reinforced resinoid bond for

an optimal ratio between grindingperformance and disc life


KW0300281 KW03-281 Depressed Centre Wheel 100 x 6 x 16mm (4) F/Cast Iron

KW0300282 KW03-282 Depressed Centre Wheel 125 x 6 x 22.23mm (5) F/Cast Iron



Specification KW03-281 KW03-282 KW03-283 KW03-284

Dimension mm 100 x 6 x 16 125 x 6 x 22.23 150 x 6 x 22.23 180 x 6 x 22.23

Dimension inch 4 x 1/4 x 5/8 5 x 1/4 x 7/8 6 x 1/4 x7/8 7 x 1/4 x 7/8

Shape

Speed rpm 13700 11000 10000 8500

Cut. Speed m/s 72 72 72 72

KW03-281 KW03-282 KW03-283 KW03-284

FOR CAST IRON

KW03-277KW03-276KW03-275KW03-274

Features: General purpose disc for all metal grinding applications

Made from brown fused aluminium oxide

Medium hard bond for an optimal ratio between grinding performance and disc life


KW0300274 KW03-274 Depressed Centre Wheel 100 x 6 x 16mm (4)

KW0300275 KW03-275 Depressed Centre Wheel 125 x 6 x 22.23mm (5)



Specification KW03-274 KW03-275 KW03-276 KW03-277

Dimension mm 100 x 6 x 16 125 x 6 x 22.23 150 x 6 x 22.23 180 x 6 x 22.23

Dimension inch 4 x 1/4 x 5/8 5 x 1/4 x 7/8 6 x 1/4 x7/8 7 x 1/4 x 7/8

Shape

Speed rpm 13700 11000 10000 8500Cut. Speed m/s 72 72 72 72

FOR GENERAL STEEL



Features: Flat surface

Titanium coated Ideal for grinding on glass, ceramic, metal, and composite material


KW0300258 KW03-258 Diamond Cutter Blade Gold 105 x 2.2 x 7x20/16mm

KW0300259 KW03-259 Diamond Cutter Blade Green 105 x 2.2 x 7x 20/16mm

KW0300260 KW03-260 Diamond Cutter Blade Cyan 105 x 1.2 x 7 x 20/16mm

Cutting CapacityWet : 110m

Dry : 60 ~ 80m


Dry : 60m


Dry : 70 ~ 90m

Ideal for Cutting:

Concrete Tile

Stone

Brick

Marble

KW03-258 KW03-259 KW03-260

DIAMOND WHEEL

For Wet Application

Ideal for cutting:

Concrete, marble, brick, granite, and asphalt.

For Dry and Wet Application

Ideal for cutting:

Natural and artificial stone, brick, granite, reinforced concrete,

marble, berglass applied for wet, and dry cutting.

Order No. Type Description Max. Speed

KW0300256 KW03-256 Diamond Wheel Turbo Wet 105mm (4) 14500rpm

KW0300257 KW03-257 Diamond Wheel Wet and Dry 105mm (4) 14500rpm

Continuous Rim(Turbo)

KW03-256KW03-257

Continuous Rim(Wet)

DIAMOND WHEEL AND CUTTER

DIAMOND ELECTRO

DIAMOND CUTTER


KW0300261 KW03-261 Diamond Electro Coated Gold 105 x 20/16mm Flat Surface

KW0300262 KW03-262 Diamond Electro Coated Gold 105 x 20/16mm Convex Surface

KW03-261

For Dry Grinding

KW03-262

FOR STONE AND GLASS

Features: Convex surface

Titanium coated Ideal for grinding on glass, ceramic, metal, and composite material

DIAMOND WHEEL



FILE

FILE SET


KW0300227 KW03-227 Needle File Set 140mm (6pcs)

KW0300228 KW03-228 Key File Set 140mm (6pcs)

KW0300229 KW03-229 Needle Rasp File Set 160mm (6pcs)

KW03-227

KW03-228

KW03-229

Contains: 1pc halfround smooth le 140mm

1pc at hand smooth le 140mm

1pc triangle smooth le 140mm

1pc round smooth le 140mm 1pc square smooth le 140mm

1pc at warding smooth le 100mm

Contains:

1pc halfround smooth le 140mm

1pc at hand smooth le 140mm 1pc triangle smooth le 140mm

1pc round smooth le 140mm

1pc square smooth le 140mm 1pc at warding smooth le 140mm

Contains:

1pc halfround rasp le 160mm 1pc at hand rasp le 160mm

1pc triangle rasp le 160mm

1pc round rasp le 160mm 1pc square rasp le 160mm

1pc at warding rasp le 160mm




KW0300224 KW03-224 File Set 6~8 (7 pcs)

6-8

Contains:

Plastic handles all size

6 slim taper smooth single cut le

6 half round smooth le

8 half round rasp le

6 round bastard le

6 at bastard double cut le

8 mill bastard single cut le

7pcs

Contains:

5 pcs 8 le with handle:

1pc at second cut le

1pc round bastard le

1pc square second cut le

1pc half round second cut le

1pc three square second cut le

Case Dimension : 36 x 35 x 31cm

Weight : 0.7kg

Order No Type Description

KW0300230 KW03-230 File Set 8 (5pcs)

Contains:

2pcs plastic handle all size

1pc 6 round smooth le

1pc 6 slim taper smooth le

1pc 6 three square second cut le

1pc 8 shoe rasp le

1pc 8 farmer second cut le

1pc 8 round bastard le

1pc 8 half round wood rasp

1pc 8 at smooth le

1pc 8 half round second cut le

1pc 10 at bastard le


KW0300226 KW03-226 File and Rasp Set (12pcs)

5pcs

12pcs

FILES SET

FILE



Feature:

Round on one side and at on the other.

Both sides are double cut.

The le tapers toward the point in both width

and thickness.

Benefit:

The half round side (front) makes this le ideal for

getting into rounded holes, concave corners, crevices

etc. It also can be used on flat surfaces.

Order No. TypeSize

Length Description

mm inch

KW0300184 KW03-184 100 4 Half Round Bastard File 4

KW0300185 KW03-185 100 4 Half Round Smooth File 4









Feature:

Tapered in width and thickness.

Double cut on both sides and single cut on edges.

Benefit:

Favored for use in factories, machine shops

and garage.

Order No. Type

Size Length

Descriptionmm inch

KW0300174 KW03-174 100 4 Flat Bastard File 4

KW0300175 KW03-175 100 4 Flat Smooth File 4









Order No. TypeSize Length

Descriptionmm inch

KW0300194 KW03-194 100 4 Round Bastard File 4

KW0300195 KW03-195 100 4 Round Smooth File 4









Feature:

Tapered in width and thickness.

Double cut on both sides and single cut on edges.

Benefit:

Favored for use in factories, machine shops, and garage.

FILE

FILE

FLAT FILE

HALF ROUND FILE

ROUND FILE



Feature:

Triangular as the taper les but doublecut with sharp corner slightly set and single cut edges.

Angle are 60 and tapers toward the point.

Benefit: For cleaning out corner, lling angles, taps, and cutter.

It is also used on flat surfaces.


Descriptionmm inch

KW0300204 KW03-204 100 4 Three Square Bastard File 4

KW0300205 KW03-205 100 4 Three Square Smooth File 4







Feature: The cross-section is square.

It is double cut and tappers toward the point.

Benefit: For ling grooves, square hole

inside corner and for finishing cutting tools.

Larger sizes frequently preferred to correspondwith at les because heavier sections and four lling surfaces.


Descriptionmm inch

KW0300212 KW03-212 100 4 Square Bastard File 4

KW0300213 KW03-213 100 4 Square Smooth File 4








Descriptionmm inch

KW0300220 KW03-220 100 4 Slim Taper Bastard File 4




Features:

Single cut

Edges set and cut for ling gullets between saw teeth

Triangular in shape and tapered toward the point

FILE

FILE

THREE SQUARE FILE

SQUARE FILE

SLIM TAPER FILE



Features:

Aggressive, multiple row wheel brushes with brass coated steel wire, and crimped (0,30mm)

For medium and heavy applications


Dimension

rpmD

mm

A

mm

T

mmArbor Hole B Max.

mmR

mm

KW0300040 KW03-40 Bench Grinder Brush 100 x 16mm 100 16 17 20 30 8,000


KW0300042 KW03-42 Bench Grinder Brush 150 x 25mm 150 25 28 32 50.8 6,000


KW0300044 KW03-44 Bench Grinder Brush 250 x 25mm 250 25 47 50.8 100 3,000

100

150

200

Features:

File with holder

For curved tooth les without tang

Benefits:

Can be used with either 12 or 14 les

Easily adjusted for curving le outward or inward


KW0300225 KW03-225 Adjustable Flexible File with Holder 14

KW0300231 KW03-231 Flexible File 14

14

ADJUSTABLE FILE, CYLINDER HONE, AND WIRE BRUSH

ADJUSTABLE FILE AND CYLINDER HONE

ADJUSTABLE FLEXIBLE FILE

ADJUSTABLE CYLINDER HONE

WIRE BRUSH

BENCH GRINDER BRUSH

Order No Type Description

KW0300027 KW03-27 Adjustable Brake Cylinder Hone 11/16~ 2 1/5

KW0300029 KW03-29 Replacement Stone for KW03-27

KW0300028 KW03-28 Adjustable Brake Cylinder Hone 2 ~ 7

KW0300030 KW03-30 Replacement Stone for KW03-28

KW03-27

KW03-29



Features:

Crimping Cup Brush 75.

Brushing tools for single

handed angle grinders. For

light or medium rust removal

and deburring. Brass coated

steel wire, crimped (0.30mm).

Features:

Crimping Cup Brush 80 & 100.

Sturdy tools for heavy cleaning

jo bs an d fo r br us hi ng la rg e

surfaces. Brass coated steel wire,

crimped (0.30mm).

75


Dimension Thread

Gmm

rpmD

mm

T

mm

KW0300045 KW03-45 Crimped Cup Brush 75mm x M10 x 1.50 75 20 M10 x 1.5 12500




80 100

KW03-48

KW03-45 KW03-47

BRUSHING

Features:

Knotted Cup Brush.

Brushing tools with tempered steel wire, knotted (0.50mm), for high speed angle

grinders. Aggresive tools for fast heavy duty cleaning and brushing of large surfaces.

They remove carbon, paint, rust, scale, and other kinds of contamination.

The removable bridle prevents the trim from exing.

80


Dimension ThreadG

mm

rpmD

mm

T

mm

Knots

mm

KW0300049 KW03-49 Knotted Cup Brush 65mm x M10 x 1.5 65 19 18 M10 x 1.5 12500




10075

65

KW03-49 KW03-50 KW03-51 KW03-52

WIRE BRUSH

CUP BRUSH

CRIMPED CUP BRUSH

KNOTTED CUP BRUSH



WIRE BRUSH

TAPER BRUSH

Wheel Brushes

Sturdy tools for heavy cleaning jobs and brushing large

surface with coarse wire. The small diameter makes

them most suitable for use on hard to reach areas. Fill

material brass coated steel wire, 0.30mm crimped.


DimensionShank

D A T

mm

KW0300056 KW03-56 Diy Cup Brush 50mm 50 19 16 1/4

KW0300057 KW03-57 Diy Cup Brush 75mm 75 22 20 1/4

KW0300058 KW03-58 Diy End Brush 25mm 25 24 30 1/4

KW0300269 KW03-269 Diy End Brush 15mm 15 24 30 1/4


Dimension Thread

G rpmD

mm

A

mm

T

mm

KW0300069 KW03-69Taper Brush Brass Coat Steel Wire

100 x 10 mm x M10100 10 20 M10 x 1.5 12500

Feature:

The ideal shape for brushing hard to reach areas. Multipurpose brushes for

light and medium cleaning jobs. Brass coated steel wire, crimped (0,30mm).

Feature:

Wheel Brushes

Sturdy tools for heavy cleaning jobs and brushing large

surface with coarse wire. The small diameter makes them

most suitable for use on hard to reach areas. Fill material

brass coated steel wire, 0.30mm crimped.


Dimension

ShankD

mm

A

mm

T

mm

KW0300053 KW03-53 Diy Wheel Brush 50mm 50 7 10 1/4



DIY WHEEL BRUSH

75

KW03-54

100

KW03-55

50

KW03-53

75

KW03-57

25

KW03-58

50

KW03-56

15

KW03-269

DIY WHEEL BRUSH

DIY CUP BRUSH DIY END BRUSH



Universal hand scratch brushes, with plastic handle for general cleaning purposes.

Wire size 0.30mm crimped.

WIRE BRUSH

SCRATCH BRUSHES


Dimension

L

mm

A

mm

T

mm

KW0300059 KW03-59 Scratch Brush Steel Wire 3 Row 265 140 25




KW0300063 KW03-63 Scratch Brush Brass Wire 2 Row 265 140 25



KW0300066 KW03-66 Scratch Brush Stainless Steel Wire 2 Row 265 140 25



KW03-63KW03-59

KW03-68


KW0300285 KW03-285 Wire Brush Set 9-19mm (20pcs)

KW03-285

WIRE BRUSH SET

FLEXIBLE HONING BRUSH

KW03-286

1/4 Hex. SHANK


KW0300286 KW03-286 Flexible Honing Brush 8mm













Features: Sturdy, self centring stem

Flexible lament are engineered to provide the correct

pressure to create an ideal hone-bore after bore



UnitSymbol or

AbbreviationSI unit Conversion Factor Physical Quantity Comment

S

Y

M

B

OL

S

Ampere-hour Ah 3,6 x 103C (Exact) Quantity of electricty Used for storage batteries

A

B

B

R

E

V

I

AT

I

O

N

S

Angstrom A 10-1om (Exact) Length Wavelength, atomic distance

Bar bar 105Pa (Exact) Pressure Fluids

Barrel (US) bbl 0.158,987,3m3 Volume 1 barrel (US) = 42 gallons (US)

Calorie I.T cal 4.186.8J (Exact) Energy Quantity of heat

Candela cd Basic SI unit Luminous intensityChavel vapeur (horsepower) ch 735.498,75W (Exact) Power 1ch = 75kgm/s (exact)

Degree o 1.745,329 x 10-2rad (2/360rad) Angle

Degree Celsius oC Tk = 0OC+273.15 (Exact) TemperatureThe origin of the Celcius scale is setby convention at 273.15K

Degree Fahrenheit oF Tk = 5/9 (0oF+459.67) (Exact) Temperature 0oC = 5/9 (0oF-32) (exact)

Electronvolt eV 1.602,177,33 x 10-19J Energy Atomic and nuclear Physics

Farad F Derived SI unit 1F = 1C/V Electric capacitance

Faraday 9.648,70 x 10-4C Quantity of electricity Based on carbon 12

Fluid Ounce (UK) fl oz (UK) 2.841.30 x 10-5m3 Volume

Fluid Ounce (US) fl oz (US) 2.957,35 x 10-5m3 Volume Liquids

Foot ft 30,48cm (Exact) Length The symbol is also used

Gallon (UK) gal (UK) 4.546,09 x 10-3m3 Volume

Gallon (US) gal (US) 3.785,41 x 10-3m3 Volume Liquids

Hertz Hz Derived SI unit 1Hz = 1s-1 Frequency

Horsepower (UK) hp 745.700W PowerThe US value of horse power varies

according to the field

Inch in 2.54cm (Exact) Length The symbol is also used

Joule J Derived SI unit Energy Work, quantity of heat

Kelvin K Basic SI unit Temperature Thermodynamics

Kilogram-meter kgm 9.806,65J (Exact) Work

Kilogram-force kgf 9.806,65N (Exact) Force

Kilowatt-hour kWh 3.6 x 10-6J (Exact) Energy Electrical energy consumption

Liquid pint (US) liq pt (US) 4.731,76 x 10-4m3 Volume Liquids

Liquid quart (US) liq pt 4.463,529 x 10-4m3 Volume Liquids

Litre I, L 10-3m3(Exact) Volume C.G.P.M. 1964

Lux lx Derived SI unit 1xl = 1lm/m2 Illumination

Micron 10-6m (Exact) Length Replaced by micrometer

Mile mile 1.609,344 x 103m (Exact) Length Also called statute mile

International nautical mile 1.852 x 103m (Exact) Length Sea and air navigation

Milimetre of mercury(conventional)

mmHg 133.322,4Pa Pressure Equal to 13.595,1 mmH20 (exact)

Nautical mile (UK) 1.852 x 103m (Exact) LengthSince1970, the UK nautical mile is equal

to the international nautical mile

Newton N Derived SI unit 1N = 1kg.m.s-2 Force

Ohm Derived SI unit 1 = 1V/A Electrical Resistance

Ounce oz 28.349,5gr Mass 16oz + 1lbPascal Pa Derived SI unit 1Pa = 1N/m2 Pressure, stress

Pound lb 0.453,592,37kg (Exact) Mass

Pound-force lbf 4.448,22N Force

Psi psi 6.894,757 x 103Pa PressureAbbreviation of poundforce per

square inch.

Radian rad Drived SI unit 1m/m Angle (plane)The symbol rd has also been usedin France

Second s Basic SI unit Time

Torr torr 133.322,4Pa Pressure 1/760 normal atmosPhere (exact)

Volt V Derived SI unit 1V = 1W/A Electrical Potential

Voltampere VA 1W (Exact) Apparent Electricity

Watt W Derived SI unit 1W = 1J/s PowerWatthour Wh 3600J (Exact) Energy Electrical energy consumption

Weber Wb Derived SI unit 1Wb = 1V.s Magnetic Induction

Yard yd 0.914,4m (Exact) Length

SYMBOL AND ABBREVIATIONS


16/16

section 1 abrasive produk ebook

Documents