semitec product catalogimg04.b2b.hc360.com/pic-4/handbook-pic-0/4-0-1409040.pdf · the jt...
TRANSCRIPT
PRODUCT CATALOG
CAT. No.129A
SURGE ABSORBERS
SENSORS AND MODULES
THERMISTORS
3
THERMISTOR
POWER THERMISTOR
VRD (TRANSIENT VOLTAGE SUPPRESSOR)
CRD (CURRENT REGULATIVE DIODE)
ZENAMIC (METAL OXIDE VARISTOR)
GAS TUBE ARRESTER
DIGITAL TEMPERATURE SENSOR MODULE
4
20
24
28
30
38
42
HIGH PRECISION SERIESSMD SERIESHIGH HEAT-RESISTANCE SERIESDISK SERIESSENSORS
POWER THERMISTOR SERIESMARK SERIES
SMD SERIESLEAD TYPE SERIES
LEAD TYPE SERIES
MELF TYPE SERIES
LEAD TYPE SERIESM TYPE SERIESSURGE ABSORBER UNIT SERIES
CERAMIC TUBE SERIESGLASS TUBE SERIESSA-01 SERIES
DM1 SERIES
4
2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9
B:3350
B:3400
B:365
0
1k
10k
100k
Res
ista
nce(
V)
Temperature(1/ Tx103)
THERMISTOR0Thermistor0 is the generic name given tothermally sensitive resistors.Negative temperature coefficient thermistoris generally called as thermistor. Thermistoris a semiconducting ceramic resistorproduced by sintering the materials at hightemperature,and mades from metal oxide asits main component. Depending on the manufacturing methodand the structure, there are many shapesand characteristics of thermistors, which isutilized for various purpose such astemperature measurement, temperaturecompensation and etc.The thermistor resistance values, other thanthose especially noted, are classified at astandard temperature of 258CB constant is value calculated from theresistance values at 258C and 858C.
The resistance of a temperature is solely a functionof its absolute temperature. Since electrical powerbeing dissipated within a temperature might heatabove its ambient temperature and thereby reduceits resistance, it is necessary to test for resistancewith temperature. The resistance so measured iscalled RT, which means the resistance at essentiallyzero-power.The mathematical expression which relates theresistance and the absolute temperature ofa thermistor is as follows:
Ra5Rb exp B 1T1
1T2
BT2
2
Ra T1Where: is the resistance at absolute temperatureis the resistance at absolute temperatureRb T2
B is a constant which depends on thematerial of the thermistor
Unless otherwise specified,all values of B aredetermined from measurements made at 258C and858C.The temperature coefficient of resistancea is expressed in the follow ing equation:
3100(%/ 8C)a52
Resistance -Temperature Characteristics
Dissipation factor Thermal time constantDissipation factor (d) is power in milliwattsrequired to raise thermistor temperature 18C.Measured with thermistor suspended by its leads ina specified environment.
d 5
t:Raise temperature(8C)
t
t
P (mW/ 8C)
P :Power(mW)
Thermal time constant (ta) is the time required by athermistor to change 63% of the difference betweenits initial and final temperature.Measured withthermistor suspended by its leads in specifiedenvironment.
9587
63
ta 2ta 3ta 5ta
Time (s)
(%)
D
D
D
5
JT THERMISTORThe JT thermistor is a new accurate thin NTCthermistor that offer electrical characteristics identicalto tho se of the AT, a high precision themistor,The JT, IT, HT, ET, and AT all share identical characteristicsand are interchangeable, thus selection of athermistor can be made solely on the basis ofrequired configuration, with no concern over changein design.
Part number
103 JT-025 A
Shape
Insulation film
Rated zero-power resistance at 258C 103 : 10kV
JT thermistor
Dimensions
A
3.660.5 561
2.060.5
0.560.035
0.1760.02
1.860.1
Unit(mm)
0.5max.
Adhesive
lnsulation film
lnsulation film
Solder plated wires42 Alloy leads
Slipped film : 1 max.Protruded adhesive : 1 max.
Shape Dimensions A
025 2561
5061
7561
10061
050
075
100
Specifications
Type
Resistance-Temperature
Temperature(8C)
Unit(kV)
250
240
230
220
2100
102030405060708090
100110120125
367.7204.7118.571.0243.6727.7018.0712.118.3015.8114.1473.0112.2241.6681.267
103JT 104JT
Part No. R25*1 B value*2 Dissipation factor(mW/ 8C)
Thermal time constant(s)*3
Operating temp.range(8C)
Rated powerat 258C(mW)
*1 R25 : Rated zero-power resistance value at 258C, 62% and 3% are also available.
*2 B value : determined by rated zero-power resistance at 258C and 858C.
*3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air.
103JT-103JT-104JT-
10kV61%10kV61%
100kV61%
3435K61%3435K61%4390K61%
0.70.70.7
55
5
3.53.53.5
250;90
250;90250;125
A : Polyester film3Polyester filmNil:Polyester film3Polyimide film
9584457222821191
647.2365.0212.5127.778.8850.0332.5121.6114.6610.137.1355.1113.7202.7462.371
A
ULTIMATE THINNESS, JT THERMISTOR500mm only
1.0Tiebar cut
4.0
max
.
2.5460.25
8.56
1
176
1.5
Color code
Epoxy
Unit mm
0.5 Tim-Plated42 Alloy
2.4 max.
2.4 max.3.8 max.
15 max.
Marking0.3sq TPE lead wire
4.0
max
.
5 m
ax.
2.5460.25
561
8.56
166
0.2 4.16
0.2
1.76
0.1
176
1.5
0.7
Tiebar cut
3.8 max.
Epoxy
Color code
0.5 Tim-Plated42 Alloy
Soldered
600 1200
8max.
Epoxy
32.5m
ax. Lead wire AWG30
40;100
AT-2
AT-11
AT-3
AT-4
AT THERMISTORThe AT thermistor is a high-precision thermal sensing device featuring an extremely small B-value tolerance and resistance.When used as a temperature gauge, the AT thermistor requires no adjustment between the control circuit and the sensor. This insures a temperature precision of 60.38C.Temperature indicators and control instruments are now available for use with the thermistor.
102 AT-2
ShapeHigh-precision AT thermistorRated zero-powerResistance at 258C 102 : 1 k
Dimensions Resistance tolerance Interchange precision
Part number
Specifications
Resistance -Temperature
240 230220210 0 10 20 30 40 50 60 70 80 90 100
Res
ista
nce
tole
ranc
e 6
5
4
3
2
1
Ambient temperature 8C
Tem
pera
ture
prec
isio
n 6
8C
2.5
2.0
1.5
1.0
0.560.58C
60.78C
618C
102AT-2202AT-2502AT-2103AT-2203AT-2503AT-2103AT-3103AT-4102AT-11202AT-11502AT-11103AT-11
1.0kV61%2.0kV61%5.0kV61%
10.0kV61%20.0kV61%50.0kV63%10.0kV61%10.0kV61%1.0kV61%2.0kV61%5.0kV61%
10.0kV61%
3100K61%3182K61%3324K61%3435K61%4013K61%4060K61%3435K61%3435K61%3100K61%3182K61%3324K61%3435K61%
222222223333
151515151515151075757575
101010101010101015151515
250;90250;90
250;110250;110250;110250;110250;110230;90250;90250;90
250;105250;105
BlackRedYellowWhiteNone None WhiteNoneNone None None None
Part No R25*1 B value*2 Dissipation factor
(mW/ 8C)Thermal time constant (s)*3
Operating temp.range(8C) Color code
Rated powerat 258C (mW)
*1 R25 : Rated zero-power resistance value at 258C.*2 B value : determined by rated zero-power resistance at 258C and 858C.*3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air.
24.46
18.68
14.43
11.23
8.834
6.998
5.594
4.501
3.651
2.979
2.449
2.024
1.684
1.408
1.184
1.000
0.8486
55.66
42.17
32.34
24.96
19.48
15.29
12.11
9.655
7.763
6.277
5.114
4.188
3.454
2.862
2.387
2.000
1.684
154.6
116.5
88.91
68.19
52.87
41.21
32.44
25.66
20.48
16.43
13.29
10.80
8.840
7.267
6.013
5.000
4.179
329.5
247.7
188.5
144.1
111.3
86.43
67.77
53.41
42.47
33.90
27.28
22.05
17.96
14.69
12.09
10.00
8.313
642.0
465.8
342.5
253.6
190.0
143.2
109.1
83.75
64.88
50.53
39.71
31.36
24.96
20.00
16.12
1632
1186
872.8
646.3
484.3
364.6
277.5
212.3
164.0
127.5
99.99
78.77
62.56
50.00
40.20
250
245
240
235
230
225
220
215
210
25
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
0.7229
0.6189
0.5316
0.4587
0.3967
0.3446
0.3000
0.2622
0.2285
0.1999
0.1751
0.1536
1.424
1.211
1.033
0.8854
0.7620
0.6587
0.5713
0.4975
0.4343
0.3807
0.3346
0.2949
3.508
2.961
2.509
2.137
1.826
1.567
1.350
1.168
1.014
0.8835
0.7722
0.6771
0.5961
0.5265
0.4654
0.4128
6.940
5.827
4.911
4.160
3.536
3.020
2.588
2.228
1.924
1.668
1.451
1.266
1.108
0.9731
0.8572
0.7576
13.06
10.65
8.716
7.181
5.941
4.943
4.127
3.464
2.916
2.468
2.096
1.788
1.530
1.315
1.134
0.9807
102AT 202AT 502AT 103AT 203AT 503AT
Temperature(8C)
Temperature(8C) 102AT 202AT 502AT 103AT 203AT 503AT
Unit(kV)
32.48
26.43
21.59
17.75
14.64
12.15
10.13
8.482
7.129
6.022
5.105
4.345
3.712
3.185
2.741
2.369
Type Type
1253890.5
3168
2257
240 230220210 0 10 20 30 40 50 60 70 80 90 100
Ambient temperature 8C
6
AT-11,AT-2 AT-4
HIGH PRECISION THERMISTOR
0.3
2N
To bend the lead wires, secure the lead wires at least 3mm away from the base of the epoxy coat by a cutting pliers and etc. and then bend the lead wire side, but not the epoxy coat side.
Eliminate any event and/or circumstance where more than 2N pressure is applied to the lead wires in the direction shown by the arrow or where the lead is spread wide more than 60.3mm from the original position.
Voltage - Current Characteristics
Notes
Current (mA)
Vol
tage
(V
)
10
0.1 0.2 0.3 0.5 1 2 3 5 7 10 20 30 50 70 100
20
30
50
1
2
3
5
7203AT-2
203AT-2103AT-2
502AT-2
202AT-2102AT-2
at 258C
Current (mA)
Vol
tage
(V
)
10
0.1 0.2 0.3 0.5 1 2 3 5 7 10 20 30 50 70 100
1
23
5
100
2030
50
0.1
0.20.3
0.5 102AT-11
103AT-11
103AT-4
502AT-11202AT-11
at 258C
The soldering time (the duration of the time) should be less than 7 secondswhen a soldering iron with 50W power at 3408C is applied to the portion of the lead wire at least 5mm away from the thermistor body. (at the bottomof the epoxy resin)
AT-2,3
7
8
4 max.
4 max.
f1.
5 m
ax.
f1.
6 m
ax.
3624622161
8761
4561
Resin(black)
Resin (ET-2 : light brown, ETB : black)
Soldered terminal
Resin
(0.17)
(0.25)
Enlarged view
Solder plated lead wires(resin coated insulation)
Solder plated lead wires
(0.17)
(0.25)
Enlarged view
ET-2, ETB
ET-1
Part number
Dimensions
ET THERMISTORThe ET thermistor is a smaller version of the AT thermistor.Its fast response time and high reliability makes itparticularily suitable for use in medical equipmentand thermometers. Manufactured by a fully automatedproduction line, all ET
thermistor are of indentical size
in turn making automatic assembly of sensors possible.
503 ET 1-
ET thermistorsShape
Rated zero-power resistance at 258C503 : 50kV
Specifications
Part No. R25*1 B value*2 Dissipation factor(mW/ 8C)
Thermal time constant (s)*3
Operating temp.range (8C)
Rated powerat 258C(mW)
*1 R25 : Rated zero-power resistance value at 258C.
*2 B value : determined by rated zero-power resistance at 258C and 858C.
*3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air.
402ET-1(2) 103ET-1(2)303ET-1(2)403ET-1(2)413ET-1(2)503ET-1(2)593ET-1(2)833ET-1(2)104ET-1(2)224ET-1(2)234ET-1(2)103ETB
4.0kV63%10.0kV63%30.0kV63%40.0kV63%41.0kV63%50.0kV63%59.0kV63%83.0kV63%
100.0kV63%226.0kV63%232.0kV63%
10.0kV62%
3100K61%3250K61%3760K61%3525K61%3435K61%4055K61%3617K61%4013K61%4132K61%4021K61%4274K61%3435K61%
0.70.70.70.70.70.70.70.70.70.70.70.7
3.53.53.53.53.53.53.53.53.53.53.53.5
3.2(3.4)3.2(3.4)3.2(3.4)3.2(3.4)3.2(3.4)3.2(3.4)3.2(3.4)3.2(3.4)3.2(3.4)3.2(3.4)3.2(3.4)
3.4
240; 90240; 90240;100240;100240;100240;100240;100240;100240; 90240;100240;100240; 90
Temperature (8C)Type
Resistance-Temperature
Unit (kV)
Unit (kV)
240230220210
0102030405060708090
100
57.7135.3422.3814.609.7976.7374.7363.3942.4761.8351.3781.0490.79970.6145
170.9102.263.0740.0826.1617.5111.998.3875.9884.3533.2172.4141.8361.416
253.7149.891.3057.3137.0024.4716.5611.458.0705.7914.2223.1252.346
833.3481.1287.5177.2112.473.0048.6133.0822.9616.2611.708.5696.3674.7973.662
772.8456.5277.9174.1111.773.6349.5734.0823.8917.0612.389.1356.8385.1903.990
474.4272.7161.999.1362.3840.2426.5817.9312.338.5886.0644.3383.142
445.8271.7170.1109.472.1048.5533.4123.4416.7312.158.9516.6975.077
788.5453.0269.3164.8103.666.9144.1829.8020.5114.3710.247.4195.459
977.5559.0329.8200.5125.380.2752.6235.2324.0016.5911.648.287
21161225730.1447.8282.1182.1120.381.0755.7539.0127.7820.1014.75
25151401808.2480.2293.7184.4118.678.0052.3935.8724.9917.7212.75
204.7118.571.0243.6727.7018.0712.118.3015.8114.1473.0112.2241.6681.267
402ET 103ET 303ET 403ET 413ET 503ET 593ET 833ET 104ET 224ET 234ET 103ETB
Specifications for clinical thermo-meter
Temperature (2C)Type
40.2230.0021.75
3953
67.0450.0036.25
3953
182.4136.098.56
3958
184.5135.095.87
4209
R30
R37
R45
B30/45(K)
503ET 833ET 224ET 234ET
Unit (mm)
1602
855.01318
754.326641421
33251769
70053784
90464680
810.7445.1
9
Part number
Dimensions
Taping
Package
Our newly developed IT thermistors are axialleaded diode type packaged in high-density resinmold and featured strong against various operatingenvironments.We offer IT thermistor with 62% tolerance for aresistance value of 258C and 61% for B value.IT thermistors are the most appropriate device foraccurate temperature control below 1008C.
103 I T
IT thermistorRated zero-power resistance at 258C 103 : 10kV
MarkReel Ammopack (Zig-Zag)
Epoxy
f0.6 Silver platedCP wire
f2.
560.
1
f95
62
f76
62
7062
1006
5
260658065
2460.5
f30
62
f35
0623062 3062360.1
103 AA
Lot NO
103 : 10kV
Unit (mm)
(mm)
Unit (mm) Unit (mm)
2
5
6
1.2 max
0.5 max.
Minimum quantity : 5000 pcs/reel Minimum quantity : 2000 pcs/box
Label
52
182.193.3549.8527.7516.029.5415.8763.7282.4311.623
303.4155.683.0946.2526.7015.909.7936.2144.0512.705
367.7204.7118.571.0243.6727.7018.0712.118.3015.811
1539810.8445.1253.8149.891.3157.3236.9924.4716.56
31351602855.0474.4272.7161.999.1362.3840.2426.58
9584457222821191647.2365.0212.5127.778.8850.03
1026540.5296.7169.299.8560.8738.2124.6616.3111.04
Specifications
Part No. R25*1 B value*2 Dissipation factor(mW/ 8C)
Thermal time constant (s) *3
Operating temp.range (8C)
Rated powerat 258C (mW)
*1 R25 : Rated zero-power resistance value at 258C, 61% and 3% are also available.
*2 B value : determined by rated zero-power resistance at 258C and 858C.
*3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air.
302 I T 3.0kV62%5.0kV62%
10.0kV62%20.0kV62%30.0kV62%50.0kV62%
100.0kV62%
3860K61%3860K61%3435K61%3760K61%3760K61%4055K61%4390K61%
3.63.63.63.63.63.63.6
13.513.513.513.513.513.513.5
18.018.018.018.018.018.018.0
250;125250;125250;100250;125250;125250;125250;125
Resistance-Temperature
250240230220210
0102030
40
Temperature(8C)
Temperature(8C)
1.1090.77440.55130.40000.29510.22100.16800.12950.1142
5060708090
100110120125
1.8491.2910.91890.66670.49180.36830.28000.21580.1903
4.1473.0112.2241.6681.2670.9753
7.6325.3803.8612.8152.0831.5641.1900.91590.8067
11.458.0705.7924.2233.1252.3461.7851.3741.210
17.9312.338.5886.0644.3383.1422.3021.7051.472
32.5121.6114.6610.137.1355.1113.7202.7462.371
Unit (kV)
IT THERMISTOR
Unit
502I T103I T
104 I T503I T
302I T 502I T 103I T 203I T 303I T 503I T 104I T 302I T 502I T 203I T 303I T 503I T 104I T103I T
303I T203I T
Type Type
ACCURATE AXIAL TYPE THERMISTOR
10
1.660.15
2.6560.2
3.8060.150.0260.05 1.160.150.660.2/20
103
Dimensions Dimensions
Taping Taping
Dimensions
Taping
42 AlloyEpoxy resinMark
1.660.15
3.060.3
0.3
0.81.160.15
2.6560.2
8.6560.5
5.2560.11.7
103
Mark
Epoxy resin
Solder platedlead wires42 Alloy
0.660.1
0.1760.1
0.8
0.6
Unit (mm)
Part number
HT THERMISTOR
103 HT
Shape
Tolerance of R25
Taping HTF only
Rated zero-power resistance at 258C 103 : 10kV
HT thermistors are an entirely new type of thermistorfor surface mounting (by reflow soldering) and wereacquired from breakthrough advancements in technology.Our HT thermistors are adapted metal electrodespackaged in a resin mold, unlike conventional chipthemistors, and can offer 62% tolerance for aresistance value at 258C.HT series (SMD Thermistor) is not only compact-surface mounting type but also highly accurate aswell as highly reliable.
182.193.3549.8527.7516.029.5415.8763.7282.4311.623
303.4155.683.0946.2526.7015.909.7936.2144.0512.705
367.7204.7118.571.0243.6727.7018.0712.118.3015.811
1539810.8445.1253.8149.891.3157.3236.9924.4716.56
31351602855.0474.4272.7161.999.1362.3840.2426.58
9584457222821191647.2365.0212.5127.778.8850.03
1026540.5296.7169.299.8560.8738.2124.6616.3111.04
Specifications
Part No. R25*1 B value*2 Dissipation factor(mW/ 8C)
Thermal time constant (s)*3
Operating temp.range (8C)
Rated powerat 258C (mW)
*1 R25 : Rated zero-power resistance value at 258C, 61% and 3% are also available.
*2 B value : determined by rated zero-power resistance at 258C and 858C.
*3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air.
302HT(F)502HT(F)103HT(F)203HT(F)303HT(F)503HT(F)104HT(F)
3.0kV62%5.0kV62%
10.0kV62%20.0kV62%30.0kV62%50.0kV62%
100.0kV62%
3860K61%3860K61%3435K61%3760K61%3760K61%4055K61%4390K61%
1.01.01.01.01.01.01.0
8.08.08.08.08.08.08.0
5.05.05.05.05.05.05.05.05.05.0
250;125250;125250;100250;125250;125250;125250;125250;100250;125250;125
Resistance-Temperature
250240230220210
010203040
Type302HT 502HT 103HT 203HT 303HT 503HT
Type302HT 502HT 103HT 203HT 303HT 503HT 104HT
Temperature(8C)
Temperature(8C)
1.1090.77440.55130.40000.29510.22100.16800.12950.1142
5060708090
100110120125
1.8491.2910.91890.66670.49180.36830.28000.21580.1903
4.1473.0112.2241.6681.2670.9753
7.6325.3803.8612.8152.0831.5641.1900.91590.8067
11.458.0705.7924.2233.1252.3461.7851.3741.210
17.9312.338.5886.0644.3383.1422.3021.7051.472
32.5121.6114.6610.137.1355.1113.7202.7462.371
Unit (kV)
4.060.1
1.960.1
4.060.11.4560.12.060.1
1.75
60.
1
16.0
60.
2
0.260.05
f1.5560.05
1.760.51.560.1
2.060.1
4.060.1
4.060.12.060.1
3.56
0.1
1.55
60.
1
8.0 6
0.2
0.260.05
(1.5)
4.46
0.1
1.2560.15
1.760.15
2.560.2 060.050.360.15 0.960.15
103
Epoxy resinMark
1.560.1 4.060.1
4.060.12.060.1
3.56
0.1
1.75
60.
1
8.0 6
0.2
0.260.05
(1.3)
104HT
-TP-
1P : 61% 2P : 62%
103HTS503HTS104HTS
10.0kV62%50.0kV62%
100.0kV62%
3435K61%4055K61%4390K61%
1.01.01.0
6.06.06.0
HT HTF HTS
(2.8
5)
9.36
0.1
Minimum quantity:3000pcs/reel
SURFACE MOUNT TYPE THERMISTOR
11
0.74
60.
03
0.86
0.1
0.25
60.
03
0.660.1
1.660.1
0.4760.03 0.4760.03
Part number
Dimensions
FT THERMISTORThe FT thermistors, the highly reliable thermistors, are characterised by their fast response time, which was made possible by the miniaturzation of the thermistor dimensions. FT thermistors are also heat-resistant type.FT thermistors are the most excellent products of today,s chip thermistors manufacturing.
364 FT
Thin film thermistor
Rated zero-powerResistance at 258C : 360kV
Part No.Temperature(8C)
Resistance-Temperature
364FT
Part No.Temparature(8C) 364FT
Part No.Temperature(8C) 364FT
Part No.Temperature(8C) 364FT
22021521025
05
1015202530354045
50556065707580859095
100105110115
120125130135140145150155160165170175180185
190195200205210215220225230235240245250
2416.01903.01512.01209.0 974.3 787.5 641.4 526.1 434.4 360.0 299.7 250.9 211.3 178.5
151.5129.2110.895.2182.1871.2462.0054.0847.3741.6036.6732.4228.7525.58
22.8320.3818.2416.4014.7813.3512.0910.979.9799.0848.2877.5766.9396.365
5.8495.3854.9674.5874.2443.9283.6413.3813.1442.9282.7312.5482.381
Specifications
Part No. R25*1 B value*2 Dissipation factor(mW/ 8C)
Thermal time constant (s)*3
Operating temp.range (8C)
Rated powerat 258C (mW)
*1 R25 : Rated zero-power resistance value at 258C.
*2 B value : determined by rated zero-power resistance at 258C and 858C.
*3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air.
364FT 360.0kV65% 3370K63% 0.4 3.5 2 220;250
Unit (mm)
Unit (kV)
Connect the FTs to the electrodes using conductive epoxy resins.The FTs cannot be soldered onto the electrodes.
SMD type chip Chip thermistors are specially processed, highlyreliable thermistors. They can be face-bonded to act as thermal compensators for ICs and they are manufacturedin sizes down to 1 square mm, they can also be used to detect temperature with relatively smalltime constants.
Precautions
Dimensions
Reflow soldering profile Taping
103 KT 2125 -
Rated zero-power resistance at 25�C 103:10k�
Part number
Chip thermistor
1P:�1%,2P:�2%,3P:�3%Dimension(EIAJ) 2125: Fig1 1005:Fig3
Specifications
Part No. R25*1 B value*2 Dissipation factor
(mW/ �C)Thermal time constant(s)*3
Operating temp.range( �C)
Rated powerat 25 �C(mW)
*1 R25 : Rated zero-power resistance value at 25�C.*2 B value : determined by rated zero-power resistance at 25�C and 85�C.*3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air.
103KT2125103KT1608103KT1005503KT1608104KT1608
10k�
10k�
10k�
50k�
100k�
3435K�1%3435K�1%3435K�1%4055K�1%4390K�1%
1.00.90.70.90.9
7.55.02.25.05.0
5.04.53.54.54.5
�40�125�40�125�40�125�40�125�40�125
2125(EIA : 0805) typeFig1 Fig2 1608(EIA : 0603) type
Do not expose the thermistors to high soldering heat for more than specified time. (260�C for not longer than 10s is recommended)
1.3 1.1 1.3
1.5
Recommended landdimensions for PCB
1.0 1.0 1.0
1.2
Unit(mm)
Recommended landdimensions for PCB
2.0�0.2
0.2�0.5
0.2�0.5
1.2
max
.
1.25�0.2
Glass coating
Electrode(Soldered)
1005(EIA : 0402) typeFig3
0.6 0.5 0.6
0.6
Recommended landdimensions for PCB
1.00�0.15
0.2�0.5
0.2�0.5
0.6
max
.
0.5�0.1
Glass coating
Electrode(Soldered)
1.6�0.15
0.2�0.5
0.2�0.5
0.95
max
.
0.8�1.5
Glass coating
Electrode(Soldered)
130�160�C
225�235�C
Tem
pera
ture
Time
Soldering CoolingPreheat(air)
1�3�C/s 1�2�C/s
60s max. 10s max.
1608 : Fig2
unit(mm)minimum quantity : 4000pcs/reel
1.5 (1.65�0.2)1.0�0.1
4.0�0.1
4.0�0.12.0�0.05
3.5�
0.05 1.
75�
0.1
8.0�
0.3
(2.0max.)1.2max.
( ) : 1608type
0.6max.�0.1
0
(2.4
�0.
2)1.
85�
0.1
4.0�0.1
3.5�
0.05 1.
75�
0.1
8.0�
0.3
�1.5�0.1 0
2.0�0.10
0.6�0.10
1.10
�0.
10
2.0�0.050.25max
1.0max
1005type2125, 1608type
CHIP TYPE THERMISTOR
Chip THERMISTOR
The thermistors are not moisture, so store them in a dry place. Do not expose the thermistors to high soldering heat for more than specified time.(220�C for not longer than 5 sec. is recommended)
1K C 5 -2040
Part number
Precautions
4.0�0.1
c : 1
�0.
2c
: 1�
0.2
1�0.
2
4.0�0.1 0.2�0.05
2�0.05
3.5�
0.05
1.75
�0.
1
8.0�
0.3
�1.5 �0.1�0
d : 1.0 �0.1�0.2
d : 0.5 �0.05�0.15
a
b
a
Electrode
Electrode
Electrode
b
a
bA Type
B Type
Dimensions TapingSome types can be taped in the following shape :
SpecificationsA Type B Type(d�0.5) B Type(d�1.0)R25*1 B value*2
*1 R25 : Rated zero-power resistance value at 25 �C.
*2 B value : determined by rated zero-power resistance at 25�C and 85�C.Operating temp. range: �30�110�C
Part No R25*1 B value*2Part No R25*1 B value*2Part No500C0-17171KC0-17172KC0-12125KC0-1111
10KC0-171720KC0-1212
500C5-20391KC5-20402KC5-20205KC5-2012
10KC5-203820KC5-2019
1KC10-32392KC10-32205KC10-3224
10KC10-321220KC10-3238
0.5k��10%1.0k��10%2.0k��10%5.0k��10%
10.0k��10%20.0k��10%
1.0k��10%2.0k��10%5.0k��10%
10.0k��10%20.0k��10%
0.5k��10%1.0k��10%2.0k��10%5.0k��10%
10.0k��10%20.0k��10%
� �
3250K�5%
3500K�5%
3850K�5%
3400K�5%
3250K�5%
3500K�5%
3850K�5%
3400K�5%
3250K�5%
3500K�5%
3850K�5%
Unit (mm)
Unit (mm)
Chip thermistor
Dimension d (0.5mm)
Dimension ab (2.0mm4.0mm)
Rated zero-power resistance at 25�C 10K:10k�
�
Minimum quantity:3000pcs/reel
CHIP TYPE THERMISTOR
14
361
1.35
60.
15
4861
Glass
Nickel-plated
(0.15)
(0.1
8)
Part number
Time constant
Dimensions
GT THERMISTORGT thermistor is combined both superior feature of BT thermistor and ET thermistor as fast response time, high reliability, wide category temperature range, high moisture proof, high accuracy and reasonable price.GT thermistor is made up of a high qualitythermistor element and the lead wire is connected tothe thermistor element by alloyed technology, andglass coating for the thermistor element.
103 GT 1-
GT thermistor
Shape
Rated zero-power resistance at 258C103 : 10kV
10095.0
86.580
63.260
40
20
00 2 4 6 8 10 12
(%)
Time (s)
on Air
in silicone oil
Specifications
Part No. R25*1 B value*2 Dissipation factor(mW/ 8C)
Thermal time constant(s)*3
Operating temp.range(8C)
Rated powerat 258C(mW)
*1 R25 : Rated zero-power resistance value at 258C.
*2 B value : determined by rated zero-power resistance at 258C and 858C.
*3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air. (silicone oil)
102GT-1202GT-1502GT-1103GT-1203GT-1503GT-1104GT-1204GT-1504GT-1105GT-1
3305K62%3838K62%3964K62%4126K62%4282K62%4288K62%4267K62%4338K62%4562K62%4608K62%
0.60.60.60.60.60.60.60.60.60.6
3333333333
7(0.6)7(0.6)7(0.6)7(0.6)7(0.6)7(0.6)7(0.6)7(0.6)7(0.6)7(0.6)
250;200250;300250;300250;300250;300250;300250;300250;300250;300250;300
Resistance-Temperature
Temperature (8C)Type
Unit (kV)
102GT 202GT 502GT 103GT 203GT 503GT 104GT 204GT 504GT 105GT250240230220210
0102030405060708090
100110120130140150160170180190200210220230240250260270280290300
32.5718.4810.846.5944.1442.6751.7731.2030.83540.59180.42730.3141
0.23470.17820.13730.1072
111.361.3433.6918.7910.826.4243.9392.4891.6181.0800.73900.51700.36950.26930.19980.15070.1154
342.1175.492.5450.4428.4916.6610.066.2644.0192.6511.7921.2390.87530.63040.46240.34500.26140.20100.15660.1236
825.1405.3206.6109.960.7234.8220.6612.647.9685.1643.4362.3411.6311.1590.83910.61810.46260.35140.27060.21110.16660.13300.1073
1901909.0453.2236.6128.372.3242.2425.4715.8210.106.6204.4443.0502.1381.5271.1110.82090.61600.46860.36130.28200.22260.17770.1432
0.1166
461321991100576.2315.1178.8104.963.5239.6225.3716.6411.167.6455.3383.7952.7422.014 1.5011.1330.86620.67040.52470.41490.33140.26730.21740.17840.14750.12300.1032
8743421821321127620.0353.7208.6126.879.3650.9633.4922.5115.4410.807.6865.5564.0823.0432.2981.7581.3601.0640.84140.67140.54080.43930.35970.29690.24680.20650.17400.14750.12580.10790.093050.08065
8810443623291272720.3421.8254.6158.2100.865.8543.9929.9820.8214.7110.577.7205.7204.2963.2692.5161.9581.5391.2220.97960.79190.64550.53030.43890.36580.30680.25910.22010.18810.16160.1396
120916268337218801083642.3391.9245.4157.5103.369.2047.2332.8423.2216.6812.158.9766.7195.0913.9033.0242.3671.8711.4921.2000.97260.79460.65390.54180.45190.37930.32030.27200.2323
6920383321901289780.9485.2309.0201.2133.690.5362.4943.9031.3422.6916.6512.399.3307.1075.4724.2553.3392.6442.1131.7021.3821.1310.93230.77350.64590.54240.45830.3894
Unit (mm)
1.0kV63%2.0kV63%5.0kV63%
10.0kV63%20.0kV63%50.0kV63%
100.0kV63%200.0kV63%500.0kV63%
1000.0kV63%
0.084830.067870.054880.044830.036970.030770.025840.021890.018690.01610
0.089730.070680.056380.045500.037150.030650.025560.021510.01826
0.098650.079670.065010.053580.044570.037410.031670.027030.023240.020140.01759
0.087410.071860.059600.049860.042040.035730.030590.02640
0.095730.079290.066200.055700.047220.04030
HIGH HEAT-RESISTANCEAND HIGH SENSITIVE THERMISTOR
15
1.35
max
.1.
5max
.
70min.
Glass
Glass
Type number
Dimensions
BT THERMISTORThe BT thermistor is a small themal sensing device providing high reliability, stable characteristics and a wide operating range of2508C to 3008C. It is used in various applications including medicalapparatus, industrial equipment and home electricappliances.
10 BT 5-
Bead thermistorShape
Rated zero-power resistance at 258C 10K:10kV
4.5max.
70 min.3.5max.
0.225 f Dumet leads
0.2f Dumet leadsFig.2
(BT-6)
Fig.1(BT-5)
Specifications
Type R25*1 B value*2 Dissipation factor(mW/ 8C)
Thermal Time constant(s)*3
Operating temp.range(8C)
Rated powerat 258C(mW)
*1 R25 : Rated zero-power resistance value at 258C, 65% are also availabie.
*2 B value : determined by rated zero-power resistance at 258C and 858C.
*3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air
1BT-52BT-55BT-5(6)9BT-5(6)
10BT-5(6)20BT-5(6)30BT-5(6)40BT-5(6)
100BT-5(6)400BT-5(6)500BT-5(6)
1.3MBT-5(6)
1.000kV610%2.000kV610%5.000kV610%9.000kV610%10.00kV610%20.00kV610%30.00kV610%40.00kV610%100.0kV610%400.0kV610%500.0kV610%1300kV610%
3,250K63%3,420K63%3,450K63%3,470K63%3,250K63%3,330K63%3,450K63%3,550K63%3,750K63%4,050K63%3,760K63%4,380K63%
0.5(0.4)0.5(0.4)0.5(0.4)0.5(0.4)0.5(0.4)
0.5(0.4)0.5(0.4)0.5(0.4)0.5(0.4)0.5(0.4)
0.50.5
4;124;12
4;12(3;8)4;12(3;8)4;12(3;8)
4;12(3;8)4;12(3;8)4;12(3;8)4;12(3;8)4;12(3;8)4;12(3;8)4;12(3;8)
250;150
250;300
250;300
250;300250;300250;300250;300250;300250;300250;300250;300
250;150
2.52.5
2.5(2)2.5(2)2.5(2)
2.5(2)2.5(2)2.5(2)2.5(2)2.5(2)2.5(2)2.5(2)
Temparature (8C)Type
Resistance-Temperature
250240230220210
010202530405060708090
100110120130140150160170180190200210220230240250260270280290300
29.8717.3310.356.3744.0382.6291.7551.2001.0000.83800.59730.43380.32050.24070.18340.14170.11100.08789
70.7140.0223.2813.968.6405.5133.6102.4212.0001.6611.1630.83110.60430.4468
0.33570.25590.19780.15470.12240.097890.079080.06450
35.4421.8413.879.0576.0605.0004.1482.8982.0651.4971.1040.82670.62800.48360.37710.29750.23730.19130.15560.12780.10580.088360.074320.06295
344.8190.3109.164.8139.7025.1516.3610.929.0007.4565.2003.6982.6771.9701.4731.1170.85810.66850.52640.41910.33690.2735
284.8163.497.6260.4138.6325.4517.2211.9210.008.4346.0844.4563.3032.4601.8501.4051.0780.83550.65400.51710.41260.33210.26960.22070.18180.15080.12580.1056
686.7383.1222.6134.283.6153.7535.5324.0920.0016.7011.818.5116.2484.6583.5222.6982.0931.6401.2961.0270.81900.65810.53270.43450.35670.29470.24510.2052
83.8054.4636.3730.0024.8817.3912.408.9906.6294.9623.7672.8972.2551.7741.4101.1300.91130.73740.59970.49090.40480.33600.28080.23600.19950.16950.14470.12430.10720.092830.080780.07060
306.8184.7115.073.8848.7740.0033.0022.8216.1011.578.4576.2794.7303.6112.7922.1821.7271.3781.1070.89430.72520.59150.48590.40180.33440.28020.23610.20000.17040.14580.12550.10840.094080.08200
486025991439827.4491.1301.4190.1123.1100.081.7155.3938.3127.0019.3814.1410.487.8665.9684.5803.5512.7822.2011.7571.4161.1500.94180.77700.64580.54030.45510.38550.32860.28160.24260.21000.18260.1595
1486945.3614.7500.0408.9277.7192.1135.396.9070.4752.0038.9029.4922.6317.5513.7610.908.7177.0345.7224.6923.8763.2252.7022.2771.9301.6441.4071.2091.0410.89950.7810
806645982718165213001029
656.0427.8284.5193.0133.092.7665.5346.9134.0325.0218.5913.9910.638.163
6.3364.9653.9263.1312.5172.0391.6631.3661.1290.93980.78710.66280.5612
1BT 2BT 5BT 9BT 10BT 20BT 30BT 40BT 100BT 400BT 500BT 1.3MBT
110436198357321091274788.4498.7400.0322.4212.8143.398.2468.5248.5034.9125.4718.8314.1010.688.1806.3324.9573.9153.1202.5082.0321.6581.3631.1270.93900.78640.66260.56130.47800.40910.3518
Unit(kV)
16
CT THERMISTORThe CT thermistor is a thermal sensor in a DO35package. Similar to the BT thermistor, it is highlyreliable and offers a wide operating range of 2508C to 2508C. It is primarily used in home electric appliances and features a competitive price due to a fully automated production method.
512 CT-4
ShapeCT-ThermistorRatd zero-power resistance at 258C 1 : 1kV
Part number
Dimensions
Resistance-Temperature
Glass encapsulated0.5f Nickel-plated
4.0 max.2861 28611.
8f
To allow automatic insertion, this product can be taped.
Temperature (8C)Type
252CT 512CT 562CT 912CT 103CT 113CT 203CT 473CT 513CT 563CT 104CT 204CT250240230220210
0102030405060708090
100110120130140150160170180190200210220230240250
120.265.6036.4820.9112.327.5164.7383.0742.0451.3930.96980.68950.49930.36800.27570.20980.16200.12670.10030.080280.064940.053020.043690.036300.030390.02562
137.981.0248.9330.5619.6512.968.7796.0804.2963.0952.2671.6871.2700.96500.74020.57350.44930.35590.28470.22980.18700.15340.12670.10550.088330.07445
151.488.9653.7333.5521.5814.239.6396.6764.7173.3982.4891.8521.3941.0600.81280.62980.49330.39080.31260.25240.20530.16840.13910.11580.096990.08175
94.6258.0236.6723.8215.9210.917.6265.4413.9522.9182.1841.6561.2690.97870.76050.59520.47020.37500.30160.24440.19960.16430.13620.11360.095410.080630.068530.058570.05031
104.063.7640.2926.1817.4911.998.3815.9804.3423.2062.4001.8201.3941.0760.83570.65400.51680.41210.33140.26860.21930.18050.14960.12490.10490.088600.075310.064360.05529
114.470.1344.3228.7919.2413.189.2196.5784.7773.5272.6402.0021.5341.1830.91930.71940.56840.45330.36460.29550.24130.19860.16460.13740.11530.097460.082840.070800.06082
81.0052.6335.1524.0116.7411.888.5706.2394.5813.4012.5531.9371.4891.1560.90750.71910.57520.46380.37710.30910.25520.21220.17770.14970.12690.10820.09271
127.184.1656.8639.0127.0719.0513.589.8077.1875.3273.9973.0402.3371.8151.4251.1290.90310.72800.59190.48490.40000.33240.27800.23390.19790.1683
138.091.3261.7042.3329.3720.6714.7410.647.7985.7814.3373.2982.5351.9691.5461.2260.97990.78990.64220.52610.43410.36070.30160.25380.21470.1827
151.5100.367.7546.4732.2522.7016.1811.688.5596.3484.7623.6222.7842.1621.6981.3461.0760.86740.70520.57770.47660.39610.33120.27870.23580.2006
272.2179.4120.983.1158.2341.5230.1422.1916.5712.529.5867.4345.8274.6193.6942.9822.4281.9921.6471.3711.1490.96970.82350.70330.60380.5208
553.6362.5242.5165.7115.381.9159.1443.3632.2824.3318.5714.3611.248.9007.1085.7324.6663.8293.1682.6412.2161.8711.5911.3601.1691.010
Specifications
Part No. R25*1 B value*2 Dissipation factor(mW/ 8C)
Thermal time constant (s)*3
Operating temp.range(8C)
Rated powerat 258C(mW)
*1 R25 : Rated zero-power resistance value at 258C.*2 B value : determined by rated zero-power resistance at 258C and 858C.*3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air.
252CT-4512CT-4562CT-4912CT-4103CT-4113CT-4203CT-4473CT-4513CT-4563CT-4104CT-4204CT-4
2.5kV65%5.1kV65%5.6kV65%9.1kV65%10.0kV65%11.0kV65%20.0kV65%47.0kV65%51.0kV65%56.0kV65%100.0kV65%200.0kV65%
3670K62%3200K62%3200K62%3270K62%3270K62%3270K62%3410K62%3610K62%3610K62%3610K62%3450K62%3500K62%
2.12.12.12.12.12.12.12.12.12.12.12.1
10.510.510.510.510.510.510.510.510.510.510.510.5
10;2010;2010;2010;2010;2010;2010;2010;2010;2010;2010;2010;20
250;250250;200250;200250;250
250;250250;250250;250250;250250;250250;250250;250250;250
Unit(mm)
Unit(kV)
DT THERMISTORThe DT thermistor used for room temperature controls, is applied in accordance with several operating conditions as opposed to actually compensating temperature. This high quality, stable thermistors can be employed for temperature control sensingbetween 2508C and 1008C.
1 DT -1
ShapeDT ThermistorReted zero-power resistance at 258C 1:1kV
Part number
Dimensions
5006202065
2.561
561
8 m
ax.
6 m
ax.
5 m
ax.
8 max.30 min.
DT-1
DT-2
Resin Lead wire Tinned
Soldered CP wire
0.5f
Specifications
Part No. R25*1 B value*2 Dissipation factor(mW/ 8C)
Thermal time constant (s)*3
Operating temp.range(8C)
Rated powerat 258C(mW)
*1 R25 : Rated zero-power resistance value at 258C. *2 B value : determined by rated zero-power resistance at 258C and 858C.*3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air.
1DT-1(2)2DT-1(2)5DT-1(2)
10DT-1(2)20DT-1(2)30DT-1(2)50DT-1(2)
100DT-1(2)
1.0kV65%2.0kV65%5.0kV65%
10.0kV65%20.0kV65%30.0kV65%50.0kV65%
100.0kV65%
3230K63%3230K63%3330K63%3330K63%3280K63%3280K63%4870K63%4870K63%
8.5(5.0)8.5(5.0)8.5(5.0)8.5(5.0)8.5(5.0)8.5(5.0)8.5(5.0)8.5(5.0)
60(25)60(25)60(25)60(25)60(25)60(25)60(25)60(25)
42(25)42(25)42(25)42(25)42(25)42(25)42(25)42(25)
250;100(110)250;100(110)250;100(110)250;100(110)250;100(110)250;100(110)250;100(110)250;100(110)
Unit(mm)
TEMPERATURE COMPENSATION
D THERMISTORThe D thermistor, based on resistance changes, isused in transistor, coil and other such temperaturecompensating circuits found in TV
,s, radio, etc.
1K D-5
DiameterDisk thermistorRated zero-power resistance at 258C1k:1kV
Part number
Dimensions
Taping
35 min.
5.0
max
.6.
0max
.
Resin
Soldered CP wire
3.56
1.0
0.5f
6.3561.3
062.0
6.0 max. 5.0 max.
1.5 max.
20.0
11.
52
1.0
9.0
10.
752
0.5
18.0
11.
02
0.5
5.010.820.2
3.8560.7
12.760.3
12.761.0
f0.560.05
11.0
max
.
2.0
max
32.2
5 m
ax.
3.0
max
.12
.5 m
in.
f4.060.3
461
16.0
60.
5
0.53
560.
2
2,500pcs/box
Unit (mm)
Unit(mm)
Specifications
Part No. R25*1 B value*2 Dissipation factor(mW/ 8C)
Thermal time constant(s)*3
Operating temp.range(8C)
Rated powerat 258C(mW)
*1 R25 : Rated zero-power resistance value at 258C, 610% are also available. *2 B value : determined by rated zero-power resistance at 258C and 858C.*3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air.
50D-580D-5
100D-5200D-5250D-5300D-5360D-5500D-5800D-51KD-5
1.5KD-52KD-55KD-58KD-5
10KD-515KD-520KD-525KD-550KD-5
100KD-5
50.0V615%80.0V615%
100.0V615%200.0V615%250.0V615%300.0V615%360.0V615%500.0V615%800.0V615%
1.0kV615%1.5kV615%2.0kV615%5.0kV615%8.0kV615%
10.0kV615%15.0kV615%20.0kV615%25.0kV615%50.0kV615%
100.0kV615%
3250K65%3300K65%3300K65%3400K65%3450K65%3500K65%3550K65%3650K65%3850K65%3950K65%3950K65%4000K65%4100K65%4200K65%4200K65%4250K65%4300K65%4300K65%4650K65%4850K65%
3.53.53.53.53.53.53.53.53.53.53.53.53.53.53.53.53.53.53.53.5
1313131313131313131313131313131313131313
297297297297297297297297297297297297297297297297297297297297
240;1110240;1110240;1110240;1110240;1110240;1110240;1110240;1110240;1110240;1110240;1110240;1110240;1110240;1110240;1110240;1110240;1110240;1110240;1110240;1110
17