sgs hong kong limited 香港通用檢測認證有限公司

HOKLAS 009 List of CAB Terminated Activities(Notification letter No.: HOKLAS009-397; Effective date of termination: 28 May 2021)
NL No. HOKLAS009-397, Annex III Page 1 of 3
SGS Hong Kong Limited

1/F, On Wui Centre, 25 Lok Yip Road, Fanling, New Territories, Hong Kong
25
SPECIFIC TEST OR
PROPERTY MEASURED
SPECIFICATION, STANDARD METHOD
Accreditation of the following tests has been terminated
Petroleum products :-
(LPG)
Petroleum (LP) Gases and Propane/Propene
mixtures by gas chromatography
Natural Gas (NG) - Analysis for Natural Gas and Similar Gaseous GPA Standard 2261-13
Mixtures by Gas Chromatography:
(Notification letter No.: HOKLAS009-397; Effective date of termination: 28 May 2021)
OGC Laboratory, Lung Hong Street, Area 38, Tuen Mun, New Territories, Hong Kong
38
SPECIFIC TEST OR
PROPERTY MEASURED
Petroleum Products: -
Visual inspection (free water and particulate ASTM D4176-04 (Reapproved 2014) (Procedure 1)
contamination)
- Volatility:
- Combustion:
(by calculation)
Annex III
(Notification letter No.: HOKLAS009-397; Effective date of termination: 28 May 2021)
38
SPECIFIC TEST OR
PROPERTY MEASURED
(2 hours at 100oC)
- Stability:
Thermal oxidation stability (JFTOT) ASTM D3241-18 (excluding Annexes A3 and A4)
- Contaminations:
- Incidential materials
Annex III
Annex III, NL HOKLAS009-390 Page 1 of 6
(Notification letter No.: HOKLAS009-390; Effective date of termination: 1 December 2020)

25
Construction Materials
SPECIFIC TEST OR
PROPERTY MEASURED
Steel Elemental composition : -
(250, 500B, 500C) Molybdenum, Nitrogen, Nickel, Phosphorus,
Sulphur, Vanadium
(250, 500B, 500C) (by calculation)
Annex III
(Notification letter No.: HOKLAS009-390; Effective date of termination: 25 January 2021)

25
SPECIFIC TEST OR
PROPERTY MEASURED
Care performance tests :-
General textiles and garments - Dimensional stability to washing AATCC Test Method 135-2015
AATCC Test Method 150-2012
AATCC Test Method 124-2011
other textile end products after domestic
Chemical analysis :-
Other Materials :-
BS EN ISO 17226-1: 2008
ISO 17226-2: 2008 + Corr. 1: 2009
BS EN ISO 17226-2: 2008 + Corr. 2010
- pH value ISO 4045: 2008
Colour fastness tests :-
General textiles and garments - Rubbing/crocking BS EN ISO 105 X12: 2002
DIN EN ISO 105 X12: 2002
ISO 105 X12: 2001
Construction tests :-
General textiles and garments - Threads per unit length ASTM D3775 - 12
- Yarn linear density (yarn in skein form) ASTM D1907/D1907M - 12 Option 1
Specific products:-
- Children’s upper outwear - Measurement of drawstrings ASTM F1816 - 97 (Reapproved 2009)
Annex III

25
SPECIFIC TEST OR
PROPERTY MEASURED
Fabric performance tests :-

- Absorbency of textile AATCC Test Method 79-2014
- Air permeability ASTM D737 - 04(2016)
- Liquid moisture management GB/T 21655.2-2009

- Thermal and water vapour resistance GB/T 11048-2008 Type A Instrument

- Water resistance (hydrostatic pressure) AATCC Test Method 127-2017 Option 2
BS EN 20811: 1992 + Amd. 7006
ISO 811: 1981
Feather and down analysis :-
EN 12131: 1998
EN 12130: 1998
EN 13088: 2001

25
SPECIFIC TEST OR
PROPERTY MEASURED
Fibre analysis :-
General textiles and garments (quantitative method - mechanical separation ISO 1833-3: 2006
and chemical analysis) ISO 1833-4: 2006
ISO 1833-6: 2007
ISO 1833-7: 2006
ISO 1833-9: 2006
ISO 1833-10: 2006
ISO 1833-11: 2006
ISO 1833-12: 2006
ISO 1833-13: 2006
ISO 1833-14: 2006
ISO 1833-16: 2006
ISO 1833-17: 2006
ISO 1833-18: 2006
ISO 1833-20: 2009
Cashmere, wool, specialty fibres and their - Fibre content AATCC Test Method 20A-2017 Cl. 14
blends (quantitative method - microscopic analysis)

- Seam strength (Grab method) FZ/T 01031-1993

- Tearing strength (Elmendorf) ASTM D1424 - 09(2013)
- Tensile strength (Breaking force by strip ASTM D5035 - 11 (2015)
method)
Performance tests :-
Specific Products :-
- Textiles Products - Instruction for use of products of consumer GB 5296.4-1998
interest – Instruction for use of textiles and
apparel


25
SPECIFIC TEST OR
PROPERTY MEASURED
Performance tests :- (cont’d)
Specific Products :- (cont’d)

- Men’s suits and coats - Specifications of garment products GB/T 2664-2009

- Women’s suits and coats - Specifications of garment products GB/T 2665-2009

< Excluding the following >
Cl. 5.4, 6.1, 7.1, 8.2, 8.3 and 8.4
5.4, 6.1, 7.1, 8.2, 8.3 8.4
- Knitted swimming suits - Specifications of garment products FZ/T 73013-2010
Cl.7.2-7.4 7.2-7.4
- Knitted trousers - Specifications of garment products FZ/T 73029-2009 + Amdt1 2011
Cl. 5.3, 6.1, 6.2, 7.1, 8.2, 8.3 and 8.4
5.3, 6.1, 6.2, 7.1, 8.2, 8.3 8.4
- Knitted constructive in-wear - elastic style - Specifications of garment products FZ/T 73019.1-2010
- < Excluding the following >
Cl. 8.2 8.2

25
SPECIFIC TEST OR
PROPERTY MEASURED
Performance tests :- (cont’d)
Specific Products :- (cont’d)
- Silk & filament yarn scarves - Specifications of garment products FZ/T 43014-2008

- Graudated compression hosiery - Compression, stiffness and labelling BS 6612: 1985
- Knitted sports socks - Specifications of garment products FZ/T 73037-2010

- Protective clothing - Protection against rain BS EN 343: 2003 + A1: 2007/AC:2009
(materials and seams of protective clothing) EN 343: 2003 + A1: 2007/AC:2009
- Protective gloves - Mechanical risks BS EN 388: 2003
EN 388: 2003
(Type HR15N, HRA and HRC only)
(HR15N, HRA HRC)

Annex III
Notification Letter No. HOKLAS009-389, Annex III Page 1 of 6

1/F, On Wui Centre, 25 Lok Yip Road, Fanling, New Territories, Hong Kong 25
Chemical Testing
Products made of textile (cont’d) Amine (Azo colourants) :
FZ/T 73013-2010 Cl. 4.2.1 & 5.4.5 ()
1) 4-(4-aminodiphenyl) FZ/T 81010-2009 Cl. 3.12 & 4.4.4 ()
2) (benzidine) FZ/T 73037-2010 Cl. 5.4.2 & 6.3.8 ()
3) 4-(4-chloro-o-toluidine) GB/T 22853-2009 Cl. 4.3 & 5.4.16 ()
4) 2-(2-naphthylamine) GB/T 2664-2009 Cl. 3.13 & 4.4.4 ()
5) (2-aminoazotoluene) GB/T 2665-2009 Cl. 3.13 & 4.4.4 ()
6) 2--4-(2-amino-4-nitrotoluene) GB/T 2666-2009 Cl. 3.13 & 4.4.16 ()
7) (p-chloroaniline)
9) 4,4’- FZ/T 73012-2008 Cl. 5.3 & 6.2.8 ()
(4,4’-diaminodiphenylmethane) FZ/T 73029-2009 Cl. 5.4.1.2 & 6.4.8 ()
10) 3,3’-(3,3’-dichlorobenzidine) FZ/T 73032-2009 Cl. 5.3.1 & 6.2.13 ()
11) 3,3’-
12) 3,3’- GB/T 17592-2011
(3,3’-dimethylbenzidine) (Techniques used are GC-MSD and HPLC-DAD)
13) 3,3’--4,4’
20) 2,4,5-(2,4,5-trimethylaniline)
21) ()(2-anisidine)
22) 2,4-(2,4-xylidine)
23) 2,6-(2,6-xylidine)
Surface coating materials Canada Consumer Product Safety Act (S.C. 2010, c. 21)
Surface Coating Materials Regulations (SOR/2016-193)
- Total mercury content Health Canada Product Safety Reference Manual
Book 5 – Laboratory Policies and Procedures Part B:
Test Methods Section C-07: Determination of Total
Mercury in Surface Coating Materials and Applied
Coatings (2017-04-25)
Annex III
Food
Toxicology tests :-
Food containers - Leachable lead and cadmium ASTM C927 - 80 (2014)
(lip & rim areas of glass tumblers)
Microbiological tests :-
General foodstuff - Coliform count US FDA Bacteriological Analytical Manual Online
BAM online), Ch. 4, September 2002.
(By MPN Method)
BAM online), Ch. 5, February 2014
- Staphylococcus aureus count US FDA Bacteriological Analytical Manual Online
(BAM online, Ch. 12, January 2001
Dairy Products - Coliform count US FDA Bacteriological Analytical Manual Online
BAM online), Ch. 4, September 2002.
(By MPN Method)
Miscellaneous
Guidelines-Microbiology Guidelines (2016)
Products
- Staphylococcus aureus British Pharmacopoeia Volume V (2017)
- Pseudomonas aeruginosa App. XVI B, B1
- Escherichia coli European Pharmacopoeia 9.0 edition (2016) Ch.
- Salmonella 2.6.13
- Clostridia Supplement (2017) General Chapter <62>
- Candida albicans
- Total Aerobic Microbial Count British Pharmacopoeia Volume V (2017)
- Total Combined Yeasts and Molds Count App. XVI B, B2
European Pharmacopoeia 9.0 edition (2016) Ch.
2.6.12
Annex III
Pharmaceutical Products
substances for pharmaceutical use Supplement (2017) General Chapter <1111>
Microbial enumeration test Test procedures for compliance testing:-
- Total Aerobic Microbial Count United States Pharmacopoeia 40-NF35, Second
- Total Combined Yeasts and Molds Count Supplement (2017) General Chapter <61>
Test for specified microorganisms Test procedures for compliance testing:-
- Staphylococcus aureus United States Pharmacopoeia 40-NF35, Second
- Pseudomonas aeruginosa Supplement (2017) General Chapter <62>
- Escherichia coli
Ch. 5.1.4 ( Microbiological Quality of Non-sterile
Pharmaceutical Preparations and Substances
(Microbiological Quality of Non-sterile
Pharmaceutical Use)
- Staphylococcus aureus European Pharmacopoeia 9.0 edition (2016)
- Escherichia coli Ch. 2.6.13
- Clostridia App. XVI B1
- Total Aerobic Microbial Count European Pharmacopoeia 9.0 edition (2016)
- Total Combined Yeasts and Molds Count Ch. 2.6.12
British Pharmacopoeia Volume V (2017)
App. XVI B2
Substances, preparations and articles which, Sterility Tests United States Pharmacopoeia 40-NF35, Second
according to pharmacopoeia, are required to be Supplement (2017) General Chapter <71>
sterile
Method 2.6.1 App XVIA
Annex III
Toys and Children’s Products
ITEM TESTED OR MEASURED
Aqueous liquids and play dough - Microbial enumeration test British Pharmacopoeia Volume V (2017)
- Total Aerobic Microbial Count App. XVI B, B2
- Total Combined Yeasts and Molds Count European Pharmacopoeia 9.0 edition (2016)
Ch. 2.6.12
- Test for specified microorganisms British Pharmacopoeia Volume V (2017)
- Staphylococcus aureus App. XVI, B1
- Escherichia coli European Pharmacopoeia 9.0 edition (2016)
- Pseudomonas aeruginosa Ch. 2.6.13
- Candida albicans Supplement (2017) General Chapter <62>
- Bile-Tolerant Gram-Negative Bacteria
ASTM F963-17 Cl. 4.3.6.3 and 8.4.1
Test procedures for compliance testing:-
Toy aqueous liquids and play dough - Microbial enumeration test United States Pharmacopoeia 40-NF35, Second
- Total Aerobic Microbial Count Supplement (2017) General Chapter <61>
- Total Combined Yeasts and Molds Count
- Test for specified microorganisms United States Pharmacopoeia 40-NF35, Second
- Staphylococcus aureus Supplement (2017) General Chapter <62>
- Escherichia coli
- Pseudomonas aeruginosa
25
Toys

- Electric toys All required tests as specified in GB 6675.1-2014
<Excluding the following> CNCA-13C-069: 2010 GB 6675.2-2014
- toys containing gas or liquid GB 6675.3-2014
- imitation weapon toys GB 6675.4-2014
- chemical toys GB 19865-2005
- toys intended to be used in water
- toys likely to be cleaned with liquid
- CNCA-13C-069: 2010 GB 6675.1-2014
<> GB 6675.2-2014
25
Toys (cont’d)
- Plastic toys All required tests as specified in GB 6675.1-2014
- chemical toys
- cosmetic toys
- CNCA-13C-070: 2010 GB 6675.1-2014
<> GB 6675.2-2014
25
Toys (cont’d)
- Metal toys All required tests as specified in GB 6675.1-2014
- chemical toys
- cosmetic toys
- CNCA-13C-071: 2010 GB 6675.1-2014
<> GB 6675.2-2014
25
Toys (cont’d)
- Projectile toys All required tests as specified in GB 6675.1-2014
- chemical toys
- cosmetic toys
- CNCA-13C-072: 2010 GB 6675.1-2014
<> GB 6675.2-2014
25
Toys (cont’d)
- chemical toys
- cosmetic toys
- CNCA-13C-073: 2010 GB 6675.1-2014
<> GB 6675.2-2014
(Notification Letter No. HOKLAS009-385; Effective date of termination: 18 May 2020)
NL No. HOKLAS009-385, Annex II Page 1 of 3
25
Electrical tests :-
Section 4.25
ASTM F963-16
Section 4.25
Annex II
25
Flammability tests
<Excluding the following>
Toys ISO 8124-2: 2007
highly flammable solids
25
Physical and mechanical tests :-
EN 71-1:2014
4.18 (test to EN 15649-3) and 4.20.2.5
Toys ASTM F963-11
Safety requirements Section 4.1, 4.5 to 4.24, 4.26 to 4.28,
4.30 to 4.39
Labeling requirements Section 5
Instructional literature Section 6
Test methods Section 8
ASTM F963-16
Safety requirements Section. 4.1, 4.3.7, 4.5 to 4.24, 4.26 to 4.28,
4.30 to 4.41
Labeling requirements Section 5
Instructional literature Section 6
Test methods Section 8
Unit 2 and 3, G/F Block A, Po Lung Centre, 11 Wang Chiu Road, Kowloon Bay, Kowloon, Hong Kong
A 2 3
Electrical and Electronic Products
Safety tests :-
Audio, video and similar Compliance inspection and safety tests BS EN 60065: 2002 + A12: 2011
electronic apparatus EN 60065: 2002 + A12: 2011
IEC 60065: 2001 + A1: 2005 + A2: 2010
Household electrical appliances with rated
voltage up to 250V for single phase
appliances
- General requirements - Compliance inspection and safety tests BS EN 60335-1: 2002 + A15: 2011
EN 60335-1: 2002 + A15: 2011
IEC 60335-1: 2001 + A1: 2004 + A2: 2006
- Appliances for heating liquid - Compliance inspection and safety tests IEC 60335-2-15: 2002 + A1:2008 + A2: 2008
- Grills, toasters and similar portable - Compliance inspection and safety tests IEC 60335-2-9: 2002 + A1: 2004 + A2: 2006
cooking appliances
- Kitchen machines - Compliance inspection and safety tests IEC 60335-2-14: 2006 + A1: 2008 + A2: 2012
Annex II
Notification Letter No. HOKLAS009-382, Annex II Page 1 of 3

Food
Toxicology tests :-
Food containers - Leachable lead and cadmium Canadian Glazed Ceramics and Glassware Registration
(Glazed Ceramic and Glassware) (March 19, 1998), SOR/2007-30 Registration
(February 15, 2007) and SOR/2009-179 Registration
(June 11, 2009)
ISO 6486-1:1999
Book 5 – Laboratory Policies and Procedures Part B:
Test Methods Section, Method C-10
Determination of Leachable Lead and Cadmium from
Glazed ceramics and Glassware
Meat & Meals - Staphylococcus aureus count AOAC Official Methods 2001.05 (2005)
(By 3M Petrifilm Method)

Chemical tests:-
Consumer Product Safety Improvement Act 2008
US 16 CFR Part 1303
Toys and other articles intended for use by - Total lead content Test Procedures for Compliance testing:-
children – paint and other similar ASTM F2853-10
surface-coating materials (For determination of lead in paint layers and
similar coatings on plastic and metal substrates
only)
Pencils and graphical instruments - Soluble arsenic, cadmium, hexavalent UK The Pencils and Graphic Instruments
chromium, mercury, antimony, lead, barium (Safety) Regulations SI 2406 : 1998
and their soluble compounds < Excluding the following >
samples in red
of hexavalent chromium:
Annex II

Chemical tests (cont’d) :-
directive (EC) 2017/738
- Migration of certain elements BS EN71-3: 2013+A3: 2018
Category I toy materials: Aluminium, Antimony, Arsenic, Technique used: ICP-MS
dry, brittle, powder like or pliable materials Barium, Boron, Cadmium, Chromium,
Cobalt, Copper, Lead, Manganese,
Mercury, Nickel, Selenium, Strontium,
Chromium (III) (by calculation)
Methyl tin, Butyltin, Dibutyl tin, Tributyl tin
Tetrabutyl tin, n-Octy tin, Di-n-octyl tin,
Di-n-propyl tin, Diphenyl tin, Triphenyl tin
Category III toy materials: Aluminium, Antimony, Arsenic, Technique used: ICP-OES
Scraped-off materials Barium, Boron, Cadmium, Chromium,
Coloured toys - Resistance to saliva and perspiration DIN 53160 – 1974
Annex III
List of activities for which accreditation has been terminated (Notification Letter No. HOKLAS009-381; Effective date of termination: 1 May 2020)
No. 16-B, Yip Wo Street, On Lok Tsuen, Fanling, New Territories, Hong Kong
16 B
SPECIFIC TEST OR PROPERTY MEASURED
SPECIFICATION, STANDARD METHOD OR TECHNIQUE USED

Electrical and Electronic Products:-
- Computer built-in power supply, power CNCA-C09-01: 2014
adapter and charger
GB 17625.1: 2012
16 B

EMC tests:- (cont’d)
frequency equipment - 9 kHz to 30 MHz < Excluding the following >
- Measurement of electromagnetic radiation Cl. 7.6.2.1
disturbance
Annex III
16 B

Safety tests :-
Audio, video and similar Compliance inspection and safety tests BS EN 60065: 2002 + A12: 2011
electronic apparatus EN 60065: 2002 + A12: 2011
10.3 (dielectric strength test higher than 1410V peak),
12.1.1, 12.1.2, 14 (component tests to other standards
and Annex G), 16.1, 16.2, 16.3, 18, 19.5.1,
Z1 (flame test in accordance with CLC/TS 62441), Zx,
Annexes H and K
and Annex G), 16.1, 16.2, 16.3, 18, 19.5.1,
Annexes H and K
and Annex G), 16.1, 16.2, 16.3, 18, 19.6.2, Z1,
Annexes H, K and L
IEC 60065: 2014
and Annex G), 16.1, 16.2, 16.3, 18, 19.6.2,
Annexes H, K and L
Annex III
16 B

Safety tests :- (cont’d)
appliances
EN 60335-1: 2002 + A15: 2011
15.1 (tests for IPX1 to IPX7 of IEC 60529) , 19.11.4,
22.1 (tests for IP5X and IP6X of IEC 60529),
22.32 (oxygen bomb test),
25.25, 30.2.3 (burning tests to IEC 60695-11-10),
32 (measurement of EMF according to EN 50366
or EN62233),
Annexes J and R
(Note: The above Part 1 standard should be used in
conjunction with specific product standard as detailed
in the relevant Part 2 of BS EN 60335, EN 60335 or
IEC 60335)
Annex III
16 B

appliances
EN 60335-1: 2012 + A11: 2014
or EN62233),
Annexes J, R and T
(Note: The above Part 1 standard should be used in
conjunction with specific product standard as
detailed in the relevant Part 2 of BS EN 60335,
EN 60335 or IEC 60335)
Annex III
16 B

appliances
- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15: 2002 + A11: 2012
< Excluding the following > EN 60335-2-15: 2002 + A11: 2012
- pressure cookers < Excluding the following >
- Espresso coffee makers for the above two standards
Cl. 8.1.4 (discharge energy measurement),
or EN62233),
Annexes J and R
Annexes J, R and T
Annex III
16 B

appliances
- Appliances for skin or hair care - Compliance inspection and safety tests BS EN 60335-2-23: 2003 +A2: 2015
EN 60335-2-23: 2003 + A2: 2015
19.2, 22.1 (tests for IP5X and IP6X of IEC 60529),
or EN62233),
19.2, 22.1 (tests for IP5X and IP6X of IEC 60529),
Annexes J and R
16 B

appliances
- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29: 2004 + A2: 2010
EN 60335-2-29: 2004 + A2: 2010
or EN62233),
Annexes J, R and T
Annex III
16 B

appliances
- Deep fat fryers, frying pans - Compliance inspection and safety tests BS EN 60335-2-13: 2010 + A11: 2012
and similar appliances EN 60335-2-13: 2010 + A11: 2012
or EN62233),
Annexes J and R
16 B

appliances
- Fans - Compliance inspection and safety tests BS EN 60335-2-80: 2003 + A2: 2009
- fans for tropical climates < Excluding the following >
- duct fans for the above two standards
Cl. 8.1.4 (discharge energy measurement),
19.101, 20.101 (hardness of unguarded fan blades),
or EN62233),
19.101, 20.101 (hardness of unguarded fan blades),
Annexes J and R
16 B

appliances
- Grills, toasters and similar portable - Compliance inspection and safety tests BS EN 60335-2-9: 2003 + A13: 2010
cooking appliances EN 60335-2-9: 2003 + A13: 2010
31 (salt mist tests to IEC 60068-2-52),
or EN62233),
Annexes J and R
Annexes J and R
16 B

appliances
- Humidifier - Compliance inspection and safety tests BS EN 60335-2-98: 2003 + A2: 2008
- Appliances intended to be connected to < Excluding the following >
water mains for the above two standards
- Electro-type appliances Cl. 8.1.4 (discharge energy measurement),
or EN62233),
Annexes J and R
16 B

appliances
- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14: 2006 + A1: 2008 + A11: 2012
EN 60335-2-14: 2006 + A1: 2008 + A11: 2012
or EN62233),
IEC 60335-2-14: 2006 + A1: 2008 + A2: 2012
Annexes J, R and AA
IEC 60335-2-14: 2016
Annexes J, R, T and AA
Annex III
16 B

appliances
- Shavers, hair clippers and similar - Compliance inspection and safety tests BS EN 60335-2-8: 2015 + A1: 2016
appliances EN 60335-2-8: 2015 + A1: 2016
or EN62233),
Annexes J, R and T
Annex III
16 B

Information technology and electrical - Compliance inspection and safety tests EN 60950-1: 2006 + A2: 2013
business equipment: < Excluding the following >
- Radio equipment Cl. 2.9.2, 2.10.5.4,
- Fixed network telecommunications 3.2.5.1 (tests for cables to other standards),
equipment 4.2.8, 4.2.11, 4.3.6, 4.3.12, 4.3.13, 4.4.5,
- Power supply units 4.6.2 (test for fire enclosures to Cl. A.3),
- Calculators 4.7.3.2 (flammability test of materials to Cl. A.2),
- Document shredding Machines 7.4.3, Zx, Annex A.2, A.3, Q and U
- Pencil sharpeners
- Laminating machines < Excluding the following >
Cl. 2.9.2, 2.10.5.4,
4.2.8, 4.2.11, 4.3.6, 4.3.12, 4.3.13, 4.4.5,
4.6.2 (test for fire enclosures to Cl. A.3),
4.7.3.2 (flammability test of materials to Cl. A.2),
7.4.3, Annex A.2, A.3, Q and U
Annex III
16 B

Telecommunications equipment tests :-
Telephones, fax machines, dial-up modems, - Test for wire-line equipment HKCA 2011 Issue 6 (2010)
answering machines and recording - Power level in on-hook state Cl. 3.4
machines - Voice-band impedance in on-hook state Cl. 3.6
- Off-hook DC characteristics Cl. 4
- Power level for voice transmission equipment Cl. 7.3
- Out-band power limits Cl. 7.4
- DTMF signalling Cl. 8.5
Land mobile service radio equipment with - Test For Transmitter: ETSI EN 300 086-1: 2016
an internal or external RF connector - Frequency error
intended primarily for analogue speech - Transmitter power (conducted)
- Maximum effective radiated power
- Unwanted emissions in the spurious domain
Land mobile service radio equipment using - Test For Transmitter: ETSI EN 300 296-1: 2016
integral antennas intended primarily for - Frequency error
analogue speech - Effective radiated power
- Maximum permissible frequency deviation
- Radiated unwanted emissions in the spurious
domain
(Notification Letter No. HOKLAS009-379; Effective date of termination: 15 March 2020)

Chemical Testing
Chemical tests :-
Ferric chloride solution Assay
Free acid content
Sodium hypochlorite solution Available Chlorine
GB 19106-2003 Cl. 5.2
Free Caustic Alkali
Sodium chlorite solution Assay of sodium chlorite
( SO2) HG/T 3814-2006 Cl. 4.3
Sodium bisulfite solution Assay of sodium bisulfite
GB/T 4348.1-2000
<excluding determination of sodium carbonate>

Chinese Medicine
Proprietary Chinese medicines General requirements for 2000 ()
preparations: - 2005 ()
2010 ()
2015 ()
Volume I (Chinese Edition)
Volume III (Chinese Edition)
- () Water (Drying in oven method) IX H ()
Determination of water in accordance with App.
IX H (Drying in oven method)
- 0115 General requirements 0115
0832 ()
requirement 0832 (Drying in oven method)

Food
Organic contaminants:-
(excluding determination of DIDP in oil) Di(2-ethylhexyl) phthalate (DEHP) (By HPLC/MS/MS)
Benzylbutyl phthalate (BBP)
Di-isononyl phthalate (DINP)

Physical and Chemical tests :-
- Oily based cream, lotion and gel Assay of Hydroquinone In-house method CS ASSAY1-001 (HPLC-DAD)
Annex III

Chemical tests :-
Toys, equipment and other products for use by a Canada Toys Regulations (SOR/2011-17)
child in learning or play that have had a
surface coating applied to them - Total mercury content Test Procedures for Compliance testing:
Health Canada Product Safety Reference Manual
Book 5 – Laboratory Policies and Procedures
Part B: Test Methods Section C-07
Determination of Total Mercury in Surface
Coating Materials and Applied Coatings
(2017-04-25)
Book 5 – Laboratory Policies and Procedures
Part B: Test Methods Section, Method C-03:
Determination of Leachable Arsenic (As),
Selenium (Se), Cadmioum (Cd), Antimony (Sb)
and Barium (Ba) in Applied Coatings
(2014-02-20)

Chemical tests (cont’d) :-
directive (EC) 2017/738
- Migration of certain elements BS EN71-3: 2013+A2: 2017
BS EN71-3: 2013+A1: 2014
BS EN71-3: 2013
Category I toy materials: Aluminium, Antimony, Arsenic, Technique used: ICP-MS
dry, brittle, powder like or pliable materials Barium, Boron, Cadmium, Chromium,
Category III toy materials: Aluminium, Antimony, Arsenic, Technique used: ICP-OES
Scraped-off materials Barium, Boron, Cadmium, Chromium,
Annex III
(Notification Letter No. HOKLAS009-369; Effective date of termination: 23 April 2019)

Chemical Testing
DIN EN 12472:2009-09
<Excluding Cl. 8.8.3>
Spectacle frames of sunglass Release of nickel DIN EN 16128:2011-05
DIN EN 12472: 2009-09
with DIN EN ISO 12870: 2014-12 Cl. 4.2.3 and 8.8

38
- Combustion:
- Corrosion:
(2 hours at 100oC)

Miscellaneous
Liquefied Petroleum Gas - Residues ASTM D2158-11
(LPG)
Annex III
(Notification Letter No. HOKLAS009-366; Effective date of termination: 8 January 2019)
Page 1 of 5
25
Toys

- Dolls All required tests as specified in GB 6675: 2003 + A1: 2005
<Excluding the following> CNCA-13C-073: 2010
- toys containing gas
<>
-
- Electric toys All required tests as specified in GB 6675: 2003 + A1: 2005
<Excluding the following> CNCA-13C-069: 2010 GB 19865: 2005
- mobile toys intended to be used in water
- CNCA-13C-069: 2010 GB 6675: 2003 + A1: 2005
<> GB 19865: 2005
-
-
-
- Metal toys All required tests as specified in GB 6675: 2003 + A1: 2005
<>
-
- Plastic toys All required tests as specified in GB 6675: 2003 + A1: 2005
<>
Page 2 of 5
25
Toys (cont’d)

()
- Projectile toys All required tests as specified in GB 6675: 2003 + A1: 2005
<>
Page 3 of 5
25
Electrical tests :-
Electric toys supplied at extra-low voltage - Compliance inspection and safety tests BS EN 62115: 2005 + A11: 2012
EN 62115: 2005 + A11: 2012
Cl. 9 (mobile toys intended to be used in water),
11.1 (IP tests to IEC 60529), 14.15
16 (component tests to other standards),
19.2 (burning tests to other standards),
20 (radiation tests); Annexes C, E and ZB
Annex III
Page 4 of 5
25
Flammability tests :-
<Excluding the following>
Page 5 of 5
25
Physical and mechanical tests :-
Toys - Safety requirements and test methods ISO 8124-1: 2000 + A1:2007 + A2:2007
and 4.25c)
4.25c) and 4.29
headphones)
Toys - Safety requirements and test methods GB 6675-2003 + A1: 2005
Cl. 4.1.15 d) (), 4.1.21.3,
and 4.1.25 c), 4.1.28 and
A.F ()
List of activities for which accreditation has been terminated (Notification Letter No. HOKLAS009-364; Effective date of termination: 29 November 2018)
SGS Hong Kong Limited 1/F, On Wui Centre, 25 Lok Yip Road, Fanling, New Territories, Hong Kong 25
Physical and Mechanical Testing ITEM TESTED OR MEASURED
SPECIFIC TEST OR
Furniture - Outdoor seating for domestic use - Safety tests BS EN 581-2: 2015 - Outdoor tables for domestic use - Safety tests BS EN 581-3: 2007 Spectacles - Lens in non-prescription sunglasses and fashion - Impact-resistance test ANSI Z80.3-2015, clause 4.2 eyewear - Non-prescription sunglasses - Optical requirements BS EN ISO 12312-1: 2013 EN ISO 12312-1: 2013
ISO 12312-1: 2013 - Optical test methods BS EN ISO 12311: 2013 EN ISO 12311: 2013 ISO 12311: 2013 - Physical requirements BS EN ISO 12312-1: 2013 EN ISO 12312-1: 2013 ISO 12312-1: 2013 - Physical test methods BS EN ISO 12311: 2013 EN ISO 12311: 2013 ISO 12311: 2013 - Spectacle frame - Physical requirements and test methods BS EN ISO 12870: 2014
EN ISO 12870: 2014 ISO 12870: 2012 - Unmounted lens for non-prescription sunglasses - Optical requirements BS EN ISO 12312-1: 2013
EN ISO 12312-1: 2013 ISO 12312-1: 2013 - Optical test methods BS EN ISO 12311: 2013 EN ISO 12311: 2013 ISO 12311: 2013 - Physical requirements BS EN ISO 12312-1: 2013 EN ISO 12312-1: 2013 ISO 12312-1: 2013 - Physical test methods BS EN ISO 12311: 2013 EN ISO 12311: 2013 ISO 12311: 2013
Annex III
Page 1 of 3
16 B
Safety tests :-
appliances
- Battery chargers - Compliance inspection and safety tests IEC 60335-2-29: 2002 + A1: 2004 + A2: 2009
measurements), 15.1 (tests for IPX1 to IPX7
of IEC 60529), 19.11.4,
Annexes F, J and R
- Shavers, hair clippers and similar - Compliance inspection and safety tests BS EN 60335-2-8: 2003 + A2: 2008
appliances EN 60335-2-8: 2003 + A1: 2005 + A2: 2008
IEC 60335-2-8: 2002 + A1: 2005 + A2: 2008
measurements), 15.1 (tests for IPX1 to IPX7
of IEC 60529), 19.11.4,
30.2.3 (burning tests to IEC 60695-11-10);
Annexes F, J and R
Annex III
Page 2 of 3
16 B
EMC tests :-
Emission tests
frequency equipment - 9 kHz to 30 MHz < Excluding the following >
- Measurement of electromagnetic radiation Cl. 7.6.2.1
disturbance
Annex III
Page 3 of 3
16 B
Telecommunications equipment tests :-
Land mobile service radio equipment with - Test For Transmitter: ETSI EN 300 086-1: 2010
an internal or external RF connector - Frequency error
intended primarily for analogue speech - Transmitter power (conducted)
- Maximum effective radiated power
- Unwanted emissions in the spurious domain
Land mobile service radio equipment using - Test For Transmitter: ETSI EN 300 296-1: 2013
integral antennas intended primarily for - Frequency error
analogue speech - Effective radiated power
- Maximum permissible frequency deviation
- Radiated unwanted emissions in the spurious
domain
(Notification Letter No. HOKLAS009-360; Effective date of termination: 14 August 2018)

Food
Tests for genetically modified organisms
(GMO): -
Soy, corn, tomato and their derived foodstuff Qualitative screening of transgenic trait In-house Method FP-GMO-SCRN-1
using part of the sequence of : (Real-time Polymerase Chain Reaction method/)
- Cauliflower mosaic virus promoter Gel Electrophoresis)
(CaMV 35S promoter)
Agrobacterium tumefaciens (NOS)
Soy and soy derived foodstuff Qualitative screening of transgenic trait In-house Method FP-GMO-SCRN-1
Roundup Ready Soya (RRS) using part of (Real-time Polymerase Chain Reaction method/)
the sequence of : Gel Electrophoresis)
- Soy Lectin gene (Le1)
the chloroplast transit peptide (CTP) sequence
derived from the Petunia hybrida preceding
the sequence of 5-enolpyruvylshikimate
3-phosphate synthase (EPSPS) gene
peptide (CTP) sequence derived from the
Petunia hybrida & Agrobacterium
5-enolpyruvylshikimate 3-phosphate synthase
Corn and corn derived foodstuff Qualitative screening of transgenic trait In-house Method FP-GMO-SCRN-1
Bt11 using part of the sequence of : (Real-time Polymerase Chain Reaction method/)
- MHMG gene Gel Electrophoresis)
maize dehydrogenase 1 gene (aldh1-1S)
and synthetic cry1A(b) gene
Virus promoter (CaMV P-35S) and the
phosphinothricin N-acetyl transferase (pat)
gene from Streptomyces viridochromogenes
(Notification Letter No. HOKLAS009-359; Effective date of termination: 31 July 2018)

Chemical Testing
Products made of textile Amine (Azo colourants) : FZ/T 73001-2008 Cl. 6.4.8 ()
FZ/T 73002-2006 Cl. 5.6.11 ()
1) 4-(4-aminodiphenyl) FZ/T 73017-2008 Cl. 5.4.13 ()
2)(benzidine) FZ/T 73025-2013 Cl. 5.4.6 ()
3) 4-(4-chloro-o-toluidine) FZ/T 81001-2007 Cl. 5.4.13 ()
4) 2-(2-naphthylamine) FZ/T 81006-2007 Cl. 5.4.13 ()
5)(2-aminoazotoluene) FZ/T 81010-2009 Cl. 4.4.4 ()
6) 2--4-(2-amino-4-nitrotoluene) FZ/T 81014-2008 Cl. 5.4.5 ()
7)(p-chloroaniline) FZ/T 82002-2006 Cl. 5.6.11 ()
8) 2,4-(2,4-diaminoanisole) GB/T 22853-2009 Cl. 5.4.16 ()
9) 4,4’- GB/T 23314-2009 Cl. 5.10.11 ()
(4,4’-diaminodiphenylmethane) GB/T 23328-2009 Cl. 4.4.12 ()
10) 3,3’-(3,3’-dichlorobenzidine) GB/T 2660-2008 Cl. 4.4.9 ()
11) 3,3’- GB/T 2662-2008 Cl. 4.4.11 ()
(3,3’-dimethoxybenzidine) GB/T 2664-2009 Cl. 4.4.4 ()
12) 3,3’- GB/T 2665-2009 Cl. 4.4.4 ()
(3,3’-dimethylbenzidine) GB/T 2666-2009 Cl. 4.4.16 ()
13) 3,3’--4,4’ GB/T 8878-2014 Cl. 5.1.2.6 ()
(3,3’-dimethyl-4,4’-diaminodiphenylmethane)
16) 4,4’-(4,4’-oxydianiline) GB/T 22854-2009 Cl. 5.3.14 ().
17) 4,4’-(4,4’-thiodianiline)
19) 2,4’-(2,4-toluylenediamine) GB/T 17592-2011
20) 2,4,5-(2,4,5-trimethylaniline) (Techniques used are GC-MSD and HPLC-DAD)
21)()(2-anisidine)
GB/T 23344-2009

Food
- Nitrogen

25
Establishing Microbial Quality of Cosmetic Products
Guidelines on Microbiological Quality of the
Finished Cosmetic Product, the SCCS’s notes of
guidance for the testing of cosmetic ingredients and
their safety evaluation, 9th Rev., 2015
- Test for specified microorganisms Test procedures for compliance testing:-
App. XVI B, B1
2.6.13
Ch. 4.05
- Microbial enumeration test Test procedures for compliance testing:-
App. XVI B, B2
2.6.12
Ch. 4.05

25
substances for pharmaceutical use Supplement (USP <1111> 39th edition)
- Microbial enumeration test Test procedures for compliance testing:-
United States Pharmacopoeia (2016) Second
Supplement (USP <61> 39th edition)
- Test for specified microorganisms Test procedures for compliance testing:-
United States Pharmacopoeia (2016) Second
Supplement (USP<62> 39th edition)
Microbiological quality European Pharmacopoeia 8.0 edition (2013) Ch.
5.1.4 ( Microbiological Quality of Non-sterile
Pharmaceutical Preparations and Substances
(Microbiological Quality of Non-sterile
Pharmaceutical Use)
2.6.13
App. XVI B1
2.6.12
App. XVI B2
Ch.12 Microbial Attributes of
Japanese Pharmacopeia Volume XVI (2012)
Ch. 4.05
Japanese Pharmacopeia Volume XVI (2012)
Ch. 4.05

25
Substances, preparations and articles which, Sterility Tests United States Pharmacopoeia 39, NF 34, 2016
according to pharmacopoeia, are required to be Second Supplement, General Ch. <71>
sterile
Method 2.6.1
Liquid medicine, solid medicine, oils and oily Sterility Test Japan Pharmacopoeia, Vol. XVI (2012)
solutions, and ointments and creams Supplement 1, Ch. 4.06.

25
Aqueous liquids and play dough - Microbial enumeration test British Pharmacopoeia Volume V (2015)
App. XVI, B2
Ch. 2.6.12
Supplement I, Ch.4.05
- Test for specified microorganisms British Pharmacopoeia Volume V (2015)
App. XVI, B1
Ch. 2.6.13
Supplement I, Ch.4.05
Toy aqueous liquids and play dough - Microbial enumeration test United States Pharmacopoeia (2015)
(USP<61> 38th edition, Second Supplement)
- Test for specified microorganisms United States Pharmacopoeia (2015)
(USP<62> 38th edition, Second Supplement)
Toys made from elastomers N-nitrosamines and N-nitrosatable BS EN 71-12:2013
substances <Excluding the following>
Clause 10.1 Finger paints
Toys and Children’s Products ITEM TESTED OR MEASURED

Chemical tests:- Toys made of PVC -DEHP, DBP, BBP, DINP, DNOP, DIDP In-house Method phthalate.004
NL HOKLAS009-356-Annex III Page 1 of 1
Annex III
List of tests for which accreditation has been terminated (Notification Letter No. HOKLAS009-355; Effective date of termination: 30 April 2018)
Textiles and Garments
Accreditation of the following tests is terminated
Care performance tests :- General textiles and garments - Dimensional stability to washing AATCC Test Method 135: 2012 ISO 3759: 2007 - Shrinkage of yarn in boiling water ASTM D2259-02 (2011) Section 12 - Domestic washing and drying procedures GB/T 8629-2001 for textile testing Chemical analysis :- - Release formaldehyde content AATCC Test Method 112-2008 - pH value AATCC Test Method 81-2012 Colour fastness tests :- - Rubbing/crocking AATCC Test Method 8-2013 Colour measurement tests :- - Colour Difference AATCC Test Method 173-2009 - Whiteness of textile AATCC Test Method 110-2011 Construction tests :- - Fabric weight ASTM D3776-09 (2013) Option C - Yarn linear density woven and knit fabrics ASTM D1059-01
Annex III
Fabric performance tests :- General textiles and garments - Abrasion resistance Accelerator tester AATCC Method 93-2011 Method A Martindale tester ASTM D4966-12 BS EN ISO 12947-2: 1999 - Absorbency of textile AATCC Test Method 79-2010 - Air permeability ASTM D737-04(2012) - Pilling resistance ICI Pilling Box JIS L1076-2006, Section 6 Method A Random Tumbling ASTM D3512/D3512M-10(2014 JIS L1076-2006, Method D-3 - Snagging Resistance ASTM D3939/D3939M-13 (Mace Test Method) - Solar UV Protective Properties AS/NZS 4399: 1996 - Thermal and evaporative resistance ASTM F1868-14 - Water repellency (spray rating) AATCC Test Method 22-2014 - Water resistance (hydrostatic pressure) AATCC Test Method 127-2014 Option 2 Feather and down - Testing methods for feather and down GB/T 10288-2003 GB/T 17685-2003
Annex III
Fibre analysis :- General textiles and garments - Fibre content AATCC Test Method 20A-2014 (quantitative method - mechanical separation and chemical analysis) Cashmere, wool, specialty fibres and their blends - Fibre content AATCC Test Method 20A-2014 Cl. 14 (quantitative method - microscopic analysis) ISO 17751-1-2007 (Light microscope method Only) Flammability tests :- General textiles and garments - 45° angle test ASTM D1230-10 Specific Products :- - Sleepwear - Vertical test AS/NZS 1249-2003 Strength tests :- General textiles and garments - Seam strength ASTM D1683-11a - Seam strength (Bursting method) FZ/T 01030-1993 Method A - Tearing strength (Tongue method) ASTM D2261-13 - Tensile strength (Grab method) ASTM D5034-09 (2013) Other Materials :- - Fabrics coated with rubber or plastics - Tear resistance ISO 4674-1: 2003 - Tensile strength and elongation at break ISO 1421: 1998
Annex III
Performance tests :- Specific Products :- - Clothes with fillings - Specifications of garment products GB/T 2662-2008 - Shirts and blouses - Specifications of garment products GB/T 2660-2008 - Jeanswear - Specifications of garment products FZ/T 81006-2007 - Pajamas - Specifications of garment products FZ/T 81001-2007 - Knitted cap - Specifications of garment products FZ/T 73002- 2006 - Socks - Hosiery - Specifications of garment products FZ/T 73001-2008 - Footwear - uppers and linings - Flex resistance BS EN ISO 5402-1: 2002 Corr 1 ISO 17694: 2003 - uppers and linings(Leather) - Flexibility and adhesion of finish ASTM D6182-00 (2010) Specific Products :- - High visibility safety apparel and headwear - optical performance ANSI/ISEA 107-2010 Specific Products :-
- Protective clothing materials - Water vapour permeability ASTM E96/E96M-2015 - Light blocking effect AATCC Test Method 203-2014 - Woven cap - Specifications of garment products FZ/T 82002-2006
Annex III
List of tests for which accreditation has been terminated (Notification Letter No. HOKLAS009-352; Effective date of termination: 20 March 2018)
SGS Hong Kong Limited Unit 303-305, 3/F., 31 Lok Yip Road, On Lok Tsuen, Fanling, N.T., Hong Kong. 31 303-305
Testing Required by the China Compulsory Certification System (CCC) ITEM TESTED OR MEASURED

Accreditation of the following test has been terminated Electrical and Electronic Products:- :- Information technology equipment - Information technology - All required tests as specified in equipment CNCA-C09-01: 2014 <Excluding the following> - Personal computer, server - Self-service terminal - Safety tests GB 4943.1: 2011 - Notebook, pocket PC - Monitor - EMC tests GB 9254: 2008 - Projector GB 17625.1: 2012 - Printing machine, plotter - Copying machine - Scanner - Computer game console - Cash register machine - - CNCA-C09-01: 2014 <> - - - GB 4943.1: 2011 - - - GB 9254: 2008 - GB 17625.1: 2012 - - - - -
Annex III
Electrical and Electronic Products ITEM TESTED OR MEASURED

Accreditation of the following test has been terminated Safety tests :- Audio, video and similar Compliance inspection and safety tests BS EN 60065: 2002 + A1: 2006 electronic apparatus and Amd. 17274 + A12: 2011 EN 60065: 2002 + A1: 2006 + A11: 2008 + A2: 2010+ A12: 2011 < Excluding the following > for the above two standards Cl. 6.2, 7.2, 9.1.1.1d), 10.1 10.3 (dielectric strength test higher than 1410V peak), 12.1.1, 14 (component tests to other standards), 16.1, 16.2, 16.3, 18, 19.5 (fragmentation test for glass), Annexes G, H and K, Cl. Z1 (flame test in accordance with CLC/TS 62441), and Cl. Zx (test for protection against excessive sound pressure according to EN 50332-1 and EN 50332-2) IEC 60065: 2001 + A1: 2005 + A2: 2010 < Excluding the following > Cl. 6.2, 7.2, 9.1.1d), 10.1 10.3 (dielectric strength test higher than 1410V peak), 12.1.1, 14 (component tests to other standards), 16.1, 16.2, 16.3, 18, 19.5 (fragmentation test for glass), and Annexes G, H and K
Annex III

Accreditation of the following test has been terminated Safety tests :- Audio, video and similar Compliance inspection and safety tests EN 60065: 2014 electronic apparatus < Excluding the following > Cl.6.1, 6.2, 6.3, 7.2, 8.21, 9.1.1.2d), 10.2 10.3 (dielectric strength test higher than 1410V peak), 12.1.2, 14 (component tests to other standards), 16.1, 16.2, 16.3, 18, 19.6 (fragmentation test for glass), Annexes G, H, K and L, Cl. Z1 (flame test in accordance with CLC/TS 62441), and Cl. Zx (test for protection against excessive sound pressure according to EN 50332-1 and EN 50332-2) IEC 60065: 2014 < Excluding the following > Cl. 6.1, 6.2, 6.3, 7.2, 8.21, 9.1.1.2d), 10.2 10.3 (dielectric strength test higher than 1410V peak), 12.1.2, 14 (component tests to other standards), 16.1, 16.2, 16.3, 18, 19.6 (fragmentation test for glass), and Annexes G, H, K and L,
Annex III

Accreditation of the following test has been terminated Safety tests :- (cont’d) Household electrical appliances with rated voltage up to 250V for single phase appliances - General requirements - Compliance inspection and safety tests BS EN 60335-1: 2012 + A11: 2014 EN 60335-1: 2012 + A11: 2014 < Excluding the following > for the above two standards Cl. 8.1.4 (capacitance and discharge measurements), 15.1 (tests for IPX1 to IPX7 of IEC 60529), 19.11.4, 22.32 (oxygen bomb test), 24 (component tests to other standards), 25.25 and 30.2.3 (burning tests to IEC 60695-11-10); 32 (measurement of EMF according to EN 50366 or EN62233); Annexes F, J, and R IEC 60335-1: 2010 + A1: 2013 < Excluding the following > Cl. 8.1.4 (capacitance and discharge measurements), 15.1 (tests for IPX1 to IPX7 of IEC 60529), 19.11.4, 22.32 (oxygen bomb test), 24 (component tests to other standards), 25.25 and 30.2.3 (burning tests to IEC 60695-11-10); Annexes F, J and R (Note: The above Part 1 standard should be used in conjunction with specific product standard as detailed in the relevant Part 2 of BS EN 60335, EN 60335 or IEC 60335)
Annex III

Accreditation of the following test has been terminated Safety tests :- (cont’d) Household electrical appliances with rated voltage up to 250V for single phase appliances - General requirements - Compliance inspection and safety tests BS EN 60335-1: 2002 + A2: 2006 + A15: 2011 EN 60335-1: 2002 + A1: 2004 + A11: 2004 + A2: 2006 + A12: 2006 + A13: 2008 + A14: 2010 + A15: 2011 < Excluding the following > for the above two standards Cl. 8.1.4 (capacitance and discharge measurements), 15.1 (tests for IPX1 to IPX7 of IEC 60529), 19.11.4, 22.32 (oxygen bomb test), 24 (component tests to other standards), 25.25 and 30.2.3 (burning tests to IEC 60695-11-10); 32 (measurement of EMF according to EN 50366 or EN62233); Annexes F, J and R IEC 60335-1: 2001 + A1: 2004 + A2: 2006 < Excluding the following > Cl. 8.1.4 (capacitance and discharge measurements), 15.1 (tests for IPX1 to IPX7 of IEC 60529), 19.11.4, 22.32 (oxygen bomb test), 24 (component tests to other standards), 25.25 and 30.2.3 (burning tests to IEC 60695-11-10); Annexes F, J and R (Note: The above Part 1 standard should be used in conjunction with specific product standard as detailed in the relevant Part 2 of BS EN 60335, EN 60335 or IEC 60335)
Annex III

Accreditation of the following test has been terminated Safety tests :- (cont’d) Household electrical appliances with rated voltage up to 250V for single phase appliances - Appliances for heating liquid - Compliance inspection and safety tests IEC 60335-2-15: 2012 < Excluding the following > < Excluding the following > - pressure cookers Cl. 8.1.4 (capacitance and discharge - Espresso coffee makers measurements), 15.1 (tests for IPX1 to IPX7 of IEC 60529), 19.11.4, 22.32 (oxygen bomb test), 24 (component tests to other standards), 25.25 and 30.2.3 (burning tests to IEC 60695-11-10); Annexes F, J and R BS EN 60335-2-15: 2002 + A2: 2008 + A11: 2012 EN 60335-2-15: 2002 + A1: 2005 + A2: 2008 + A11: 2012 IEC 60335-2-15: 2002 + A1:2008 + A2: 2008 < Excluding the following > for the above three standards Cl. 8.1.4 (capacitance and discharge measurements), 15.1 (tests for IPX1 to IPX7 of IEC 60529), 19.11.4, 22.32 (oxygen bomb test), 24 (component tests to other standards), 25.25 and 30.2.3 (burning tests to IEC 60695-11-10); Annexes F, J and R
Annex III

Accreditation of the following test has been terminated Safety tests :- (cont’d) Household electrical appliances with rated voltage up to 250V for single phase appliances - Appliances for skin or hair care - Compliance inspection and safety tests BS EN 60335-2-23: 2003 +A1: 2008 + A11: 2010 EN 60335-2-23: 2003 + A1: 2008 + A11: 2010 IEC 60335-2-23: 2003 + A1: 2008 + A2: 2012 < Excluding the following > for the above three standards Cl. 8.1.4 (capacitance and discharge measurements), 15.1 (tests for IPX1 to IPX7 of IEC 60529), 19.2, 19.11.4, 22.32 (oxygen bomb test), 24 (component tests to other standards), 25.25 and 30.2.3 (burning tests to IEC 60695-11-10); Annexes F, J and R - Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29: 2004 with Amd. 15663 and Amd. 15769 + A2: 2010 EN 60335-2-29: 2004 + A2: 2010 IEC 60335-2-29: 2002 + A1: 2004 + A2: 2009 < Excluding the following > for the above three standards Cl. 8.1.4 (capacitance and discharge measurements), 15.1 (tests for IPX1 to IPX7 of IEC 60529), 19.11.4, 22.32 (oxygen bomb test), 24 (component tests to other standards), 25.25 and 30.2.3 (burning tests to IEC 60695-11-10); Annexes F, J and R
Annex III

Accreditation of the following test has been terminated Safety tests :- (cont’d) Household electrical appliances with rated voltage up to 250V for single phase appliances - Deep fat fryers, frying pans - Compliance inspection and safety tests BS EN 60335-2-13: 2010 + A11: 2012 and similar appliances EN 60335-2-13: 2010 + A11: 2012 IEC 60335-2-13: 2009 < Excluding the following > for the above three standards Cl. 8.1.4 (capacitance and discharge measurements), 15.1 (tests for IPX1 to IPX7 of IEC 60529), 19.11.4, 22.32 (oxygen bomb test), 24 (component tests to other standards), 25.25 and 30.2.3 (burning tests to IEC 60695-11-10); Annexes F, J and R - Fans - Compliance inspection and safety tests BS EN 60335-2-80: 2003 + A2: 2009 < Excluding the following > EN 60335-2-80: 2003 + A1: 2004 + A2: 2009 - fans for tropical climates IEC 60335-2-80: 2002 + A1:2004 + A2: 2008 - duct fans < Excluding the following > for the above three standards Cl. 8.1.4 (capacitance and discharge measurements), 15.1 (tests for IPX1 to IPX7 to IEC 60529), 19.11.4, 19.101, 20.101 (hardness of unguarded fan blades), 22.32 (oxygen bomb test), 24 (component tests to other standards), 25.25 and 30.2.3 (burning tests to IEC 60695-11-10); Annexes F, J and R
Annex III

Accreditation of the following test has been terminated Safety tests :- (cont’d) Household electrical appliances with rated voltage up to 250V for single phase appliances - Grills, toasters and similar portable - Compliance inspection and safety tests IEC 60335-2-9: 2008 + A1: 2012 + A2:2016 cooking appliances < Excluding the following > Cl. 8.1.4 (capacitance and discharge measurements), 15.1 (tests for IPX1 to IPX7 to IEC 60529), 19.11.4, 22.32 (oxygen bomb test), 24 (component tests to other standards), 25.25 and 30.2.3 (burning tests to IEC 60695-11-10); 31 (salt mist tests to IEC 60068-2-52); Annexes F, J and R BS EN 60335-2-9: 2003 + A2: 2006 + A13: 2010 EN 60335-2-9: 2003 + A1: 2004 + A2: 2006 + A12: 2007 + A13: 2010 IEC 60335-2-9: 2002 + A1: 2004 + A2: 2006 < Excluding the following > for the above three standards Cl. 8.1.4 (capacitance and discharge measurements), 15.1 (tests for IPX1 to IPX7 to IEC 60529), 19.11.4, 22.32 (oxygen bomb test), 24 (component tests to other standards), 25.25 and 30.2.3 (burning tests to IEC 60695-11-10); 31 (salt mist tests to IEC 60068-2-52); Annexes F, J and R - Humidifier - Compliance inspection and safety tests BS EN 60335-2-98: 2003 + A2: 2008 < Excluding the following > EN 60335-2-98: 2003 + A1: 2005 + A2: 2008 - Appliances intended to be connected to IEC 60335-2-98: 2002 + A1: 2004 + A2: 2008 water mains < Excluding the following > - Electro-type appliances for the above three standards Cl. 8.1.4 (capacitance and discharge measurements), 15.1 (tests for IPX1 to IPX7 of IEC 60529), 19.11.4, 22.32 (oxygen bomb test), 24 (component tests to other standards), 25.25 and 30.2.3 (burning tests to IEC 60695-11-10); Annexes F, J and R
Annex III

Accreditation of the following test has been terminated Safety tests :- (cont’d) Household electrical appliances with rated voltage up to 250V for single phase appliances - Kitchen machines - Compliance inspection and safety tests IEC 60335-2-14: 2016 < Excluding the following > Cl. 8.1.4 (capacitance and discharge measurements), 15.1 (tests for IPX1 to IPX7 of IEC 60529), 19.11.4, 22.32 (oxygen bomb test), 24 (component tests to other standards), 25.25 and 30.2.3 (burning tests to IEC 60695-11-10); Annexes F, J, R and AA BS EN 60335-2-14: 2006 + A1: 2008 + A11: 2012 EN 60335-2-14: 2006 + A1: 2008 + A11: 2012 IEC 60335-2-14: 2006 + A1: 2008 + A2: 2012 < Excluding the following > for the above three standards Cl. 8.1.4 (capacitance and discharge measurements), 15.1 (tests for IPX1 to IPX7 of IEC 60529), 19.11.4, 22.32 (oxygen bomb test), 24 (component tests to other standards), 25.25 and 30.2.3 (burning tests to IEC 60695-11-10); Annexes F, J, R and AA
Annex III

Accreditation of the following test has been terminated Safety tests :- (cont’d) Household electrical appliances with rated voltage up to 250V for single phase appliances - Shavers, hair clippers and similar - Compliance inspection and safety tests BS EN 60335-2-8: 2003 + A2: 2008 appliances EN 60335-2-8: 2003 + A1: 2005 + A2: 2008 IEC 60335-2-8: 2002 + A1: 2005 + A2: 2008 < Excluding the following > for the above three standards Cl. 8.1.4 (capacitance and discharge measurements), 15.1 (tests for IPX1 to IPX7 of IEC 60529), 19.11.4, 22.32 (oxygen bomb test), 24 (component tests to other standards), 25.25 and 30.2.3 (burning tests to IEC 60695-11-10); Annexes F, J and R
Annex III

Accreditation of

sgs hong kong limited 香港通用檢測認證有限公司

Documents