share_preparing a usb flash drive for local commissioning enodeb 4g v0.2
TRANSCRIPT
-
8/12/2019 SHARE_Preparing a USB Flash Drive for Local Commissioning ENodeB 4G V0.2
1/3
Preparing a USB Flash Drive for Local Commissioning Confidential
2013-06-17 Huawei Proprietary - Restricted Distribution Page1, Total3
Preparing a USB Flash Drive for Local Commissioning
4GeNodeB
This document will describe how to load both software and config on Huawei eNodeB
using a USB dongle.
Version Control
Version 0.1 Initial design Radu Manea
Version 0.2 Step 4 (adding BRD type) Radu Manea
Check listdo not go on site without the below items:
1. USB dongle provided by Huawei (The USB dongle must be Huawei issued)
2. eNodeB software - SPC375
File name: BTS3900 V100R007C00SPC265 Version(eNodeB
V100R005C00SPC375 Version).part01part10.rar.
File size: 10 x 35 MB
File location: Teamspace - UK VDF MORAN Project
http://app-301.huawei.com/sites/ukvdfmoran/SitePages/Home.aspx
Download 10 files from: Project General Documents >SOFTWARE >4G LTE
eNodeB SPC375
Extract the files on the USB dongle.
After extracting the dongle will have a single folder named eNodeB, this
folder will contain the Software folder. This step does not need to be
repeated for the next eNodeB.
http://app-301.huawei.com/sites/ukvdfmoran/SitePages/Home.aspxhttp://app-301.huawei.com/sites/ukvdfmoran/SitePages/Home.aspxhttp://app-301.huawei.com/sites/ukvdfmoran/SitePages/Home.aspx -
8/12/2019 SHARE_Preparing a USB Flash Drive for Local Commissioning ENodeB 4G V0.2
2/3
Preparing a USB Flash Drive for Local Commissioning Confidential
2013-06-17 Huawei Proprietary - Restricted Distribution Page2, Total3
3. eNodeB config
This step will describe how to load the config file. Please note that each site will require a
new config. If the dongle has been used to commission other sites please remove previousconfig files.
Config location: Teamspace - UK VDF MORAN Project
http://app-301.huawei.com/sites/ukvdfmoran/SitePages/Home.aspx
Download config from: Project General Documents > DEPLOYMENT > 4G eNodeB
config files
Please extract the downloaded file on the USB dongleExample: extract on F:\ without selecting any folder, after extraction the USB should look like
below:
http://app-301.huawei.com/sites/ukvdfmoran/SitePages/Home.aspxhttp://app-301.huawei.com/sites/ukvdfmoran/SitePages/Home.aspxhttp://app-301.huawei.com/sites/ukvdfmoran/SitePages/Home.aspx -
8/12/2019 SHARE_Preparing a USB Flash Drive for Local Commissioning ENodeB 4G V0.2
3/3
Preparing a USB Flash Drive for Local Commissioning Confidential
2013-06-17 Huawei Proprietary - Restricted Distribution Page3, Total3
4. Connect the dongle in the LTE BBUs USB port on the UMPTa2
and wait 20 minutes
After 20 minutes the eNodeB will be operational.