single limit switches te v11 -...
TRANSCRIPT
Single Limit SwitchesSingle Limit Switches
Contents
Introduction Pages 3 - 4
Limit switches according to EN50041 Pages 5 - 15
Limit switches with wide housing Pages 16 - 20
Accessories Page 21
Limit Switches according to EN 50041
1
Limit Switches according to EN 50041
The TEKNIC EUCHNER - Limit Switch - Precision, Reliability and Versatility.
The TEKNIC EUCHNER - Limit switch is a versatile unit, according to the EUROPEAN STANDARD EN 50041 with EUCHNER know how and is further developed to produce a perfect universal construction. Robust construction and the exclusive use of high quality corrosion resistant materials, precision finishing and the high Protection class IP67 to IEC 60529, DIN 40050 are the guarantees for a trouble free and reliable operation under the most arduous conditions.
oLever arm or plunger actuation, 12 different actuator designs, which can be set at 4 X 90 positions about the longitudinal axis and the choice of switching direction setting (with lever arm actuation) offer the user an almost unlimited possibility for individual applications.
The Limit Switch in Detail - Cross Section of an Excellence in Design. The Plunger Actuation.The plunger actuated versions allow the user a choice of 5 different types. The stainless steel hardened plunger with telescopic action is precisely guided within anodised die-cast light alloy head, and is practically maintenance free. This plain bearing principle which is designed for many millions of operations , and is also incorporated in our precision multiple limit switches , ensures the exceptional reliability of the TEKNIC EUCHNER limit switch. The direction of the actuator head
ocan easily be changed in steps of 90 . The Diaphragm Seal.In switches with plunger actuation , the plunger area is separated from the switch chamber by a diaphragm seal made from NBR elastomer. Due to high demands the seal has a designed minimum life of 30 million operations and is therefore practically indestructable.The seal is firmly fixed to the plunger and is returned to the free position after each operation , not by the switching element but by the plunger return spring. Any development of pressure due to plunger actuation is eliminated by a relief valve.The switching element is actuated by a metal cap pressed on to the seal. Switching point displacements (a logical consequence due to the high elasticity of the seal) are therefore completely eliminated. The Lever arm-Actuation.Three different levers can be used on the lever arm actuated switches. The stainless steel shaft is precisely guided through a housing.The numerous adjusting possibilities give great flexibility :
oa) Adjustment of the actuator head around the longitudinal axis is possible in 90 steps ob) Adjustment of the lever arm in positively fixed positions is possible in 90 steps.
oc) Infinite adjustment of the lever arm within 360 .d) Adjustment of switching direction, from the right only, from the left only or from both directions. The Edge Seal.In lever arm actuated switches the actuating mechanism and the switch chamber is protected against ingress of liquids by an edge seal which is made from NBR elastomer and is resistant to all known coolant and lubricating agents. The Enclosure.The anodised die-cast aluminium housing has proved itself highly resistant to corrosion and is unaffected by even the most arduous conditions. Cable connection can be made through TEKNIC EUCHNER Cable glands (Pg 13.5). The Cable connections.Each TEKNIC EUCHNER Limit switch to EN 50041 is tested before dispatch to the customer. It must comply with protection class IP 67. In order to meet this protection class, only high quality TEKNIC EUCHNER cable connectors with captive sealing rings should be used. Switching elements.Switching element type ES510.Snap action double gap switching element with one NO contact and one NC contact . Contact gaps 2 x 0.6 mm.
Limit switch with Indicator Lamps.All limit switches can be fitted with indicator lamps at operating voltages of 24 VDC or 220 VAC. The ordering code for limit switches with Indicator Lamps can be found against the ordering codes of individual types.
2
Limit Switches according to EN 50041
Adjustment Variations for Lever arm switches
o Vertical adjustment : 4 x 90 (form fitted) or infinitely adjustable through
o360 (no positive fixing).
o
90 o
90
oHorizontal assembly : 4 x 90
o
90 o
90
Adjustment for switchingdirection for Lever arm Actuator.
Left/right switching.(Standard adjustment)
Left switching Right switching
Assembly Variations for Plunger type switches
oHorizontal change through 90
Adjustment Options
Adjustment of Switching Direction
3
Limit switch with Lever Arm Actuation.HB (Plastic Roller)HS (Steel Roller)
Limit Switches according to EN 50041
Dimensional Details
Approvals :
Ordering Code :Actuator : HB or HSSwitching Element
Ordering example : Limit switch with cable connection Pg 13.5Roller lever arm (steel roller) and Indicator Lamp 24 VDCNG1HS - 510 L024
NG1 - 5 1 0 L
Indicator Lamp Voltage : 024 = 24VDC ; 220 = 220VAC
A = Operating Point B = Final position C = Reset point
pg 13.5
630°m
ax.
58
64
42
32
16
7..3
100
74
60
+140
30
5.3
±0.1
5.3
22
52
±0
.1
+1
B75°
32
Ø18
0°3-4
1-23-41-2
Trip dog
22°
A10°
C
4
ParametersHousing MaterialDegree of protection according to IEC 60529Installation positionMechanical service lifeAmbient temperatureSwitching ElementContact ElementSwitching PrincipleContact gap according to VDE 0660Contact materialConnection typeCable cross section , maximumUtilization category according to IEC 60947-5-1Rated Insulation Voltage UiRated Impulse Withstand Voltage UimpSwitching Voltage , minimumSwitching current min at 12 VDCContact closing timeContact bounce timeShort Circuit Protection (fuse)ActuatorApproach speed , max.Approach speed , min.Pretravel before switch pointOperating Point reproducibilityMovement DifferentialOperating ForceSwitching Frequency max
ValueAnodised die-cast alloy
IP67Optional
630x10 switching cycles-25 to +80
ES 5101NO + 1NCSnap action
2 x 0.5Silver alloy AgNi10, gold flashed
Captive screw terminals with self lifting clamping discs2 x 1.5
AC-15 Ue 230V Ie 6A , DC-13 Ue 24V Ie 6A2502.51210<4<310
HB HS300 60
0.122
±0.251210
600
Unit
oC
mm
2mm
VKV
VDCmAmsmsA
m/minm/min
O
O
O
N-1min
Limit switch with Adjustable Lever Arm Actuation.VB (Plastic Roller)VS (Steel Roller)
Limit Switches according to EN 50041
Dimensional Details
Approvals :
Ordering Code :Actuator : VB or VSSwitching Element
Ordering example : Limit switch with cable connection Pg 13.5Adjustable Roller lever arm (steel roller) NG1VS - 510
NG1 - 5 1 0 L
Indicator Lamp Voltage : 024 = 24VDC ; 220 = 220VAC
5.3±0.1
5.3
30
40+1
7.3
74
100
56
64
28-7
5
42
32
16
22
6
Ø18
60
Pg13.5
±0
.1
5
ParametersHousing MaterialDegree of protection according to IEC 60529Installation positionMechanical service lifeAmbient temperatureSwitching ElementContact ElementSwitching PrincipleContact gap according to VDE 0660Contact materialConnection typeCable cross section , maximumUtilization category according to IEC 60947-5-1Rated Insulation Voltage UiRated Impulse Withstand Voltage UimpSwitching Voltage , minimumSwitching current min at 12 VDCContact closing timeContact bounce timeShort Circuit Protection (fuse)ActuatorApproach speed , max.Approach speed , min.Pretravel before switch pointOperating Point reproducibilityMovement DifferentialOperating ForceSwitching Frequency max
ValueAnodised die-cast alloy
IP67Optional
630x10 switching cycles-25 to +80
ES 5101NO + 1NCSnap action
2 x 0.5Silver alloy AgNi10, gold flashed
Captive screw terminals with self lifting clamping discs2 x 1.5
AC-15 Ue 230V Ie 6A , DC-13 Ue 24V Ie 6A2502.51210<4<310
VB VS120 30
0.522
±0.2512-
300
Unit
oC
mm
2mm
VKV
VDCmAmsmsA
m/minm/min
O
O
O
N-1min
Limit switch with Pivot Arm Actuation.SM (Aluminium Rod)
Limit Switches according to EN 50041
Dimensional Details
Approvals :
Ordering Code :Actuator : SMSwitching Element
Ordering example : Limit switch with cable connection Pg 13.5Pivot arm (aluminium rod) NG1SM - 510
NG1 - 5 1 0 L
Indicator Lamp Voltage : 024 = 24VDC ; 220 = 220VAC
Ø6
52
64
20
0
±0.1
pg 13.5
42
32
16
7.3
10
0
74
60
+140
30
5.3
±0.1
5.3
22
7
6
SM
60
ParametersHousing MaterialDegree of protection according to IEC 60529Installation positionMechanical service lifeAmbient temperatureSwitching ElementContact ElementSwitching PrincipleContact gap according to VDE 0660Contact materialConnection typeCable cross section , maximumUtilization category according to IEC 60947-5-1Rated Insulation Voltage UiRated Impulse Withstand Voltage UimpSwitching Voltage , minimumSwitching current min at 12 VDCContact closing timeContact bounce timeShort Circuit Protection (fuse)ActuatorApproach speed , max.Approach speed , min.Pretravel before switch pointOperating Point reproducibilityMovement DifferentialOperating ForceSwitching Frequency max
ValueAnodised die-cast alloy
IP67Optional
630x10 switching cycles-25 to +80
ES 5101NO + 1NCSnap action
2 x 0.5Silver alloy AgNi10, gold flashed
Captive screw terminals with self lifting clamping discs2 x 1.5
AC-15 Ue 230V Ie 6A , DC-13 Ue 24V Ie 6A2502.51210<4<310
0.522
±1.012-
300
Unit
oC
mm
2mm
VKV
VDCmAmsmsA
m/minm/min
O
O
O
N-1min
Limit switch with Plunger Actuation.RG (Plastic Roller)RS (Steel Roller)
Limit Switches according to EN 50041
Dimensional Details
Approvals :
Ordering Code :Actuator : RG or RSSwitching Element
Ordering example : Limit switch with cable connection Pg 13.5Top Roller Plunger (steel roller) and Indicator Lamp 24 VDCNG1RS - 510 L024
NG1 - 5 1 0 L
Indicator Lamp Voltage : 024 = 24VDC ; 220 = 220VAC
60
±0.1
Pg13.516
32
42
+1
R6
16
4
Ø10
Fre
epo
sition
50
Opera
ting
poin
t48
Fin
alpositi
on
44
5.3±0.1
5.3
30
40+1
7.3
74
97
7
ParametersHousing MaterialDegree of protection according to IEC 60529Installation positionMechanical service lifeAmbient temperatureSwitching ElementContact ElementSwitching PrincipleContact gap according to VDE 0660Contact materialConnection typeCable cross section , maximumUtilization category according to IEC 60947-5-1Rated Insulation Voltage UiRated Impulse Withstand Voltage UimpSwitching Voltage , minimumSwitching current min at 12 VDCContact closing timeContact bounce timeShort Circuit Protection (fuse)ActuatorApproach speed , max.Approach speed , min.Pretravel before switch pointOperating Point reproducibilityMovement DifferentialOperating ForceSwitching Frequency max
ValueAnodised die-cast alloy
IP67Optional
630x10 switching cycles-25 to +80
ES 5101NO + 1NCSnap action
2 x 0.5Silver alloy AgNi10, gold flashed
Captive screw terminals with self lifting clamping discs2 x 1.5
AC-15 Ue 230V Ie 6A , DC-13 Ue 24V Ie 6A2502.51210<4<310
RG RS20 20
0.012
±0.10.715
300
Unit
oC
mm
2mm
VKV
VDCmAmsmsA
m/minm/minmmmmmmN
-1min
Limit switch with Plunger Actuation.DO (Chisel Plunger)
Limit Switches according to EN 50041
Dimensional Details
Approvals :
Ordering Code :Actuator : DOSwitching Element
Ordering example : Limit switch with cable connection Pg 13.5 Chisel PlungerNG1DO - 510
NG1 - 5 1 0 L
Indicator Lamp Voltage : 024 = 24VDC ; 220 = 220VAC
Pg13.516
32
42
5.3±0.1
5.3
30
40 +1
7.3
74
97
60
Fre
ep
ositi
on
37
Op
era
tin
gpoin
t35
Fin
alp
ositio
n31+
1
Ø10120°
16-5°
±0
.1
8
10DO
ParametersHousing MaterialDegree of protection according to IEC 60529Installation positionMechanical service lifeAmbient temperatureSwitching ElementContact ElementSwitching PrincipleContact gap according to VDE 0660Contact materialConnection typeCable cross section , maximumUtilization category according to IEC 60947-5-1Rated Insulation Voltage UiRated Impulse Withstand Voltage UimpSwitching Voltage , minimumSwitching current min at 12 VDCContact closing timeContact bounce timeShort Circuit Protection (fuse)ActuatorApproach speed , max.Approach speed , min.Pretravel before switch pointOperating Point reproducibilityMovement DifferentialOperating ForceSwitching Frequency max
ValueAnodised die-cast alloy
IP67Optional
630x10 switching cycles-25 to +80
ES 5101NO + 1NCSnap action
2 x 0.5Silver alloy AgNi10, gold flashed
Captive screw terminals with self lifting clamping discs2 x 1.5
AC-15 Ue 230V Ie 6A , DC-13 Ue 24V Ie 6A2502.51210<4<310
0.012
±0.0020.715
300
Unit
oC
mm
2mm
VKV
VDCmAmsmsA
m/minm/minmmmmmmN
-1min
Limit switch with Plunger Actuation.RK (Roller Plunger with small Steel roller)
Limit Switches according to EN 50041
Dimensional Details
Approvals :
Ordering Code :Actuator : RKSwitching Element
Ordering example : Limit switch with cable connection Pg 13.5 Short Roller PlungerNG1RK - 510
NG1 - 5 1 0 L
Indicator Lamp Voltage : 024 = 24VDC ; 220 = 220VAC
Fre
ep
ositi
on
37
Op
era
tin
gpoin
t35
Fin
alp
ositio
n31+
1
Ø10
±0
.1
Pg13.516
32
42
R416
5.3±0.1
5.3
30
40+1
7.3
74
97
60
9
RK80
ParametersHousing MaterialDegree of protection according to IEC 60529Installation positionMechanical service lifeAmbient temperatureSwitching ElementContact ElementSwitching PrincipleContact gap according to VDE 0660Contact materialConnection typeCable cross section , maximumUtilization category according to IEC 60947-5-1Rated Insulation Voltage UiRated Impulse Withstand Voltage UimpSwitching Voltage , minimumSwitching current min at 12 VDCContact closing timeContact bounce timeShort Circuit Protection (fuse)ActuatorApproach speed , max.Approach speed , min.Pretravel before switch pointOperating Point reproducibilityMovement DifferentialOperating ForceSwitching Frequency max
ValueAnodised die-cast alloy
IP67Optional
630x10 switching cycles-25 to +80
ES 5101NO + 1NCSnap action
2 x 0.5Silver alloy AgNi10, gold flashed
Captive screw terminals with self lifting clamping discs2 x 1.5
AC-15 Ue 230V Ie 6A , DC-13 Ue 24V Ie 6A2502.51210<4<310
0.012
±0.010.715
300
Unit
oC
mm
2mm
VKV
VDCmAmsmsA
m/minm/minmmmmmmN
-1min
10
Limit switch with Plunger Actuation.KO (Ball Plunger)
Limit Switches according to EN 50041
Dimensional Details
Approvals :
Ordering Code :Actuator : KOSwitching Element
Ordering example : Limit switch with cable connection Pg 13.5 Ball PlungerNG1KO - 510
NG1 - 5 1 0 L
Indicator Lamp Voltage : 024 = 24VDC ; 220 = 220VAC
Pg13.516
32
42
5.3±0.1
5.3
30
40+1
7.3
74
97
60
Fre
ep
osi
tion
37
Op
era
ting
po
int3
5
Fin
alp
osi
tion
31+
1
Ø10
16
±0
.1
R4
KO10
ParametersHousing MaterialDegree of protection according to IEC 60529Installation positionMechanical service lifeAmbient temperatureSwitching ElementContact ElementSwitching PrincipleContact gap according to VDE 0660Contact materialConnection typeCable cross section , maximumUtilization category according to IEC 60947-5-1Rated Insulation Voltage UiRated Impulse Withstand Voltage UimpSwitching Voltage , minimumSwitching current min at 12 VDCContact closing timeContact bounce timeShort Circuit Protection (fuse)ActuatorApproach speed , max.Approach speed , min.Pretravel before switch pointOperating Point reproducibilityMovement DifferentialOperating ForceSwitching Frequency max
ValueAnodised die-cast alloy
IP67Optional
630x10 switching cycles-25 to +80
ES 5101NO + 1NCSnap action
2 x 0.5Silver alloy AgNi10, gold flashed
Captive screw terminals with self lifting clamping discs2 x 1.5
AC-15 Ue 230V Ie 6A , DC-13 Ue 24V Ie 6A2502.51210<4<310
0.012
±0.010.715
300
Unit
oC
mm
2mm
VKV
VDCmAmsmsA
m/minm/minmmmmmmN
-1min
Limit switch with Plunger Actuation.WO (Dome Plunger)
Limit Switches according to EN 50041
Dimensional Details
Approvals :
Ordering Code :Actuator : WOSwitching Element
Ordering example : Limit switch with cable connection Pg 13.5 Dome PlungerNG1WO - 510
NG1 - 5 1 0 L
Indicator Lamp Voltage : 024 = 24VDC ; 220 = 220VAC
Op
era
tin
gp
oin
t35
Fin
alp
ositi
on
31+
1
Ø10
16
R6
±0
.1
Pg13.516
32
42
5.3±0.1
5.3
30
40+1
7.3
74
97
60
Fre
ep
ositi
on
37
11
ParametersHousing MaterialDegree of protection according to IEC 60529Installation positionMechanical service lifeAmbient temperatureSwitching ElementContact ElementSwitching PrincipleContact gap according to VDE 0660Contact materialConnection typeCable cross section , maximumUtilization category according to IEC 60947-5-1Rated Insulation Voltage UiRated Impulse Withstand Voltage UimpSwitching Voltage , minimumSwitching current min at 12 VDCContact closing timeContact bounce timeShort Circuit Protection (fuse)ActuatorApproach speed , max.Approach speed , min.Pretravel before switch pointOperating Point reproducibilityMovement DifferentialOperating ForceSwitching Frequency max
ValueAnodised die-cast alloy
IP67Optional
630x10 switching cycles-25 to +80
ES 5101NO + 1NCSnap action
2 x 0.5Silver alloy AgNi10, gold flashed
Captive screw terminals with self lifting clamping discs2 x 1.5
AC-15 Ue 230V Ie 6A , DC-13 Ue 24V Ie 6A2502.51210<4<310
0.012
±0.0020.715
300
Unit
oC
mm
2mm
VKV
VDCmAmsmsA
m/minm/minmmmmmmN
-1min
WO10
Limit switch with Side Plunger Actuation.WOQ (Dome Plunger Side Actuation)
Limit Switches according to EN 50041
Dimensional Details
Approvals :
Ordering Code :Actuator : WOQSwitching Element
Ordering example : Limit switch with cable connection Pg 13.5 Side Dome PlungerNG1WOQ - 510
NG1 - 5 1 0 L
Indicator Lamp Voltage : 024 = 24VDC ; 220 = 220VAC
5.3 5.3
30
40 +1
±0.1
97
60
74
±0.1
7.3
34
Free position 8
20.5
Final position 2
Operating point 6
pg 13.5 16
3242
Ø10
25
15.5
12
WOQ10
ParametersHousing MaterialDegree of protection according to IEC 60529Installation positionMechanical service lifeAmbient temperatureSwitching ElementContact ElementSwitching PrincipleContact gap according to VDE 0660Contact materialConnection typeCable cross section , maximumUtilization category according to IEC 60947-5-1Rated Insulation Voltage UiRated Impulse Withstand Voltage UimpSwitching Voltage , minimumSwitching current min at 12 VDCContact closing timeContact bounce timeShort Circuit Protection (fuse)ActuatorApproach speed , max.Approach speed , min.Pretravel before switch pointOperating Point reproducibilityMovement DifferentialOperating ForceSwitching Frequency max
ValueAnodised die-cast alloy
IP67Optional
630x10 switching cycles-25 to +80
ES 5101NO + 1NCSnap action
2 x 0.5Silver alloy AgNi10, gold flashed
Captive screw terminals with self lifting clamping discs2 x 1.5
AC-15 Ue 230V Ie 6A , DC-13 Ue 24V Ie 6A2502.51210<4<310
0.012
±0.10.715
300
Unit
oC
mm
2mm
VKV
VDCmAmsmsA
m/minm/minmmmmmmN
-1min
Limit switch with Roller Arm.KB (Plastic Roller Arm)
Limit Switches according to EN 50041
Dimensional Details
Approvals :
Ordering Code :Actuator : KBSwitching Element
Ordering example : Limit switch with cable connection Pg 13.5 Roller arm actuationNG1KB - 510
NG1 - 5 1 0 L
Indicator Lamp Voltage : 024 = 24VDC ; 220 = 220VAC
74
60
R9
Fre
ep
ositi
on
53
Op
era
tin
gp
oin
t50
Fin
alp
ositio
n44
40
30
5.3 5.3
7.3
pg 13.516
32
42
16
186
+1
±0.1
±0
.1
±1
±1
±1
120
13
20
KB
ParametersHousing MaterialDegree of protection according to IEC 60529Installation positionMechanical service lifeAmbient temperatureSwitching ElementContact ElementSwitching PrincipleContact gap according to VDE 0660Contact materialConnection typeCable cross section , maximumUtilization category according to IEC 60947-5-1Rated Insulation Voltage UiRated Impulse Withstand Voltage UimpSwitching Voltage , minimumSwitching current min at 12 VDCContact closing timeContact bounce timeShort Circuit Protection (fuse)ActuatorActuator MaterialApproach speed , max.Approach speed , min.Pretravel before switch pointOperating Point reproducibilityMovement DifferentialOperating ForceSwitching Frequency max
ValueAnodised die-cast alloy
IP67Optional
630x10 switching cycles-25 to +80
ES 5101NO + 1NCSnap action
2 x 0.5Silver alloy AgNi10, gold flashed
Captive screw terminals with self lifting clamping discs2 x 1.5
AC-15 Ue 230V Ie 6A , DC-13 Ue 24V Ie 6A2502.51210<4<310
Glass reinforced Nylon 66
0.013
±0.10.715
300
Unit
oC
mm
2mm
VKV
VDCmAmsmsA
m/minm/minmmmmmmN
-1min
Limit switch with Angular Roller Arm.KBQ (Angular Plastic Roller Arm)
Limit Switches according to EN 50041
Dimensional Details
Approvals :
Ordering Code :Actuator : KBQSwitching Element
Ordering example : Limit switch with cable connection Pg 13.5 Angular Roller arm actuationNG1KBQ - 510
NG1 - 5 1 0 L
Indicator Lamp Voltage : 024 = 24VDC ; 220 = 220VAC
±0.1
42
32 30
40+1
11
2
60
74
5.3
±0.1
7.3
5.316pg 13.5
Fre
ep
ositio
n54
Op
era
tin
gp
oin
t57
Fin
alp
ositio
n61
R9
57.7
42.718
6
16
±1
±1
±1
14
ParametersHousing MaterialDegree of protection according to IEC 60529Installation positionMechanical service lifeAmbient temperatureSwitching ElementContact ElementSwitching PrincipleContact gap according to VDE 0660Contact materialConnection typeCable cross section , maximumUtilization category according to IEC 60947-5-1Rated Insulation Voltage UiRated Impulse Withstand Voltage UimpSwitching Voltage , minimumSwitching current min at 12 VDCContact closing timeContact bounce timeShort Circuit Protection (fuse)ActuatorActuator MaterialApproach speed , max.Approach speed , min.Pretravel before switch pointOperating Point reproducibilityMovement DifferentialOperating ForceSwitching Frequency max
ValueAnodised die-cast alloy
IP67Optional
630x10 switching cycles-25 to +80
ES 5101NO + 1NCSnap action
2 x 0.5Silver alloy AgNi10, gold flashed
Captive screw terminals with self lifting clamping discs2 x 1.5
AC-15 Ue 230V Ie 6A , DC-13 Ue 24V Ie 6A2502.51210<4<310
Glass reinforced Nylon 66
0.013
±0.10.715
300
Unit
oC
mm
2mm
VKV
VDCmAmsmsA
m/minm/minmmmmmmN
-1min
KBQ
20
Limit switch with Wide Housing & Lever Arm Actuation.HB (Plastic Roller)HS (Steel Roller)
Single Limit Switches
Dimensional Details
Ordering Code :Actuator : HB or HSSwitching Element
Ordering example : Limit switch with wide housing & M20x1.5 cable connectionRoller lever arm (steel roller) NG3HS - 510 - M
NG3 - 5 1 0
A = Operating Point B = Final position C = Reset point
9.3
5.3
67.5
3xM20
56
23
+1
40 ±0.1
43
39
25
18
10° A22°
1-23-41-2
3-4
0°
22
30°m
ax..
Trip dog
75°
B
+1
52
C
Ø18
32
64
58
6
- M
15
ParametersHousing MaterialDegree of protection according to IEC 60529Installation positionMechanical service lifeAmbient temperatureSwitching ElementContact ElementSwitching PrincipleContact gap according to VDE 0660Contact materialConnection typeCable cross section , maximumUtilization category according to IEC 60947-5-1Rated Insulation Voltage UiRated Impulse Withstand Voltage UimpSwitching Voltage , minimumSwitching current min at 12 VDCContact closing timeContact bounce timeShort Circuit Protection (fuse)ActuatorApproach speed , max.Approach speed , min.Pretravel before switch pointOperating Point reproducibilityMovement DifferentialOperating ForceSwitching Frequency max
ValueAnodised die-cast alloy
IP67Optional
630x10 switching cycles-25 to +80
ES 5101NO + 1NCSnap action
2 x 0.5Silver alloy AgNi10, gold flashed
Captive screw terminals with self lifting clamping discs2 x 1.5
AC-15 Ue 230V Ie 6A , DC-13 Ue 24V Ie 6A2502.51210<4<310
HB HS300 60
0.122
±0.251210
600
Unit
oC
mm
2mm
VKV
VDCmAmsmsA
m/minm/min
O
O
O
N-1min
Limit switch with Wide Housing & Adjustable Lever Arm Actuation.VB (Plastic Roller)VS (Steel Roller)
Single Limit Switches
Dimensional Details
Ordering Code :Actuator : VB or VSSwitching Element
Ordering example : Limit switch with wide housing & M20x1.5 cable connectionAdjustable Roller lever arm (steel roller) NG3VS - 510 - M
NG3 - 5 1 0
18
255
39
43
±0.140
+1
23
56
3xM20
67.5
5.3
9.3
22
Ø18
66
28-7
5
64
56
- M
16
ParametersHousing MaterialDegree of protection according to IEC 60529Installation positionMechanical service lifeAmbient temperatureSwitching ElementContact ElementSwitching PrincipleContact gap according to VDE 0660Contact materialConnection typeCable cross section , maximumUtilization category according to IEC 60947-5-1Rated Insulation Voltage UiRated Impulse Withstand Voltage UimpSwitching Voltage , minimumSwitching current min at 12 VDCContact closing timeContact bounce timeShort Circuit Protection (fuse)ActuatorApproach speed , max.Approach speed , min.Pretravel before switch pointOperating Point reproducibilityMovement DifferentialOperating ForceSwitching Frequency max
ValueAnodised die-cast alloy
IP67Optional
630x10 switching cycles-25 to +80
ES 5101NO + 1NCSnap action
2 x 0.5Silver alloy AgNi10, gold flashed
Captive screw terminals with self lifting clamping discs2 x 1.5
AC-15 Ue 230V Ie 6A , DC-13 Ue 24V Ie 6A2502.51210<4<310
VB VS120 30
0.522
±0.2512-
300
Unit
oC
mm
2mm
VKV
VDCmAmsmsA
m/minm/min
O
O
O
N-1min
Limit switch with wide housing & Plunger Actuation.RG (Plastic Roller)RS (Steel Roller)
Single Limit Switches
Dimensional Details
Ordering Code :Actuator : RG or RSSwitching Element
Ordering example : Limit switch with wide housing & M20x1.5 cable connectionTop Roller Plunger (steel roller) NG3RS - 510 - M
NG3 - 5 1 0
Fre
epo
sition
50+1
Ø10
4
16
90
9.3
5.3
67
.5
3xM20
56
23
+1
40±0.1
43
39
25
18
R6
Fin
alpositi
on
44
Opera
ting
poin
t48
- M
17
ParametersHousing MaterialDegree of protection according to IEC 60529Installation positionMechanical service lifeAmbient temperatureSwitching ElementContact ElementSwitching PrincipleContact gap according to VDE 0660Contact materialConnection typeCable cross section , maximumUtilization category according to IEC 60947-5-1Rated Insulation Voltage UiRated Impulse Withstand Voltage UimpSwitching Voltage , minimumSwitching current min at 12 VDCContact closing timeContact bounce timeShort Circuit Protection (fuse)ActuatorApproach speed , max.Approach speed , min.Pretravel before switch pointOperating Point reproducibilityMovement DifferentialOperating ForceSwitching Frequency max
ValueAnodised die-cast alloy
IP67Optional
630x10 switching cycles-25 to +80
ES 5101NO + 1NCSnap action
2 x 0.5Silver alloy AgNi10, gold flashed
Captive screw terminals with self lifting clamping discs2 x 1.5
AC-15 Ue 230V Ie 6A , DC-13 Ue 24V Ie 6A2502.51210<4<310
RG RS20 20
0.012
± 0.10.715
300
Unit
oC
mm
2mm
VKV
VDCmAmsmsA
m/minm/minmmmmmmN
-1min
Limit switch with wide housing & Roller Arm.KB (Plastic Roller Arm)
Single Limit Switches
Dimensional Details
Ordering Code :Actuator : KBSwitching Element
Ordering example : Limit switch with wide housing & M20x1.5 cable connection, Roller arm actuationNG3KB - 510 - M
NG3 - 5 1 0 - M
67
.5
56
23
39
43
18
+1
5.3
9.3
3xM20
25
40±0.1
Fin
alp
ositio
n44
Op
era
tin
gp
oin
t50
Fre
ep
ositi
on
53
±1±1
±1
R9 6
16
18
11
3.5
18
ValueAnodised die-cast alloy
IP67Optional
630x10 switching cycles-25 to +80
ES 5101NO + 1NCSnap action
2 x 0.5Silver alloy AgNi10, gold flashed
Captive screw terminals with self lifting clamping discs2 x 1.5
AC-15 Ue 230V Ie 6A , DC-13 Ue 24V Ie 6A2502.51210<4<310
Glass reinforced Nylon 66
0.013
±0.10.715
300
Unit
oC
mm
2mm
VKV
VDCmAmsmsA
m/minm/minmmmmmmN
-1min
ParametersHousing MaterialDegree of protection according to IEC 60529Installation positionMechanical service lifeAmbient temperatureSwitching ElementContact ElementSwitching PrincipleContact gap according to VDE 0660Contact materialConnection typeCable cross section , maximumUtilization category according to IEC 60947-5-1Rated Insulation Voltage UiRated Impulse Withstand Voltage UimpSwitching Voltage , minimumSwitching current min at 12 VDCContact closing timeContact bounce timeShort Circuit Protection (fuse)ActuatorActuator MaterialApproach speed , max.Approach speed , min.Pretravel before switch pointOperating Point reproducibilityMovement DifferentialOperating ForceSwitching Frequency max
20
KB
Limit switch with wide housing & Angular Roller Arm.KBQ (Angular Plastic Roller Arm)
Single Limit Switches
Dimensional Details
Ordering Code :Actuator : KBQSwitching Element
Ordering example : Limit switch with wide housing & M20x1.5 cable connection Angular Roller arm actuationNG3KBQ - 510 - M
NG3 - 5 1 0 - M
±1 ±1
3xM20
±0.1
Fre
ep
ositio
n54
±1
Op
era
tin
gp
oin
t57
Fin
alp
ositio
n61
42.7
R918
6
9.3
16
5.3
40
62.7
+1+139
43
56
23
67
.5
18
25
10
5.5
19
20
KBQ
ParametersHousing MaterialDegree of protection according to IEC 60529Installation positionMechanical service lifeAmbient temperatureSwitching ElementContact ElementSwitching PrincipleContact gap according to VDE 0660Contact materialConnection typeCable cross section , maximumUtilization category according to IEC 60947-5-1Rated Insulation Voltage UiRated Impulse Withstand Voltage UimpSwitching Voltage , minimumSwitching current min at 12 VDCContact closing timeContact bounce timeShort Circuit Protection (fuse)ActuatorActuator MaterialApproach speed , max.Approach speed , min.Pretravel before switch pointOperating Point reproducibilityMovement DifferentialOperating ForceSwitching Frequency max
ValueAnodised die-cast alloy
IP67Optional
630x10 switching cycles-25 to +80
ES 5101NO + 1NCSnap action
2 x 0.5Silver alloy AgNi10, gold flashed
Captive screw terminals with self lifting clamping discs2 x 1.5
AC-15 Ue 230V Ie 6A , DC-13 Ue 24V Ie 6A2502.51210<4<310
Glass reinforced Nylon 66
0.013
±0.10.715
300
Unit
oC
mm
2mm
VKV
VDCmAmsmsA
m/minm/minmmmmmmN
-1min
Accessories
Limit Switches according to EN 50041
25
M3
Lever arm Actuator
Code : NSA
Roller Plunger Actuator
Code :
NRG (plastic roller)
NRS (steel roller)
Side Dome Plunger Actuator
Code : NWOQ
Roller arm Actuator
Code : NKB
Angular Roller arm
Actuator
Code : NKBQ
Switching Element
Code : ES 510
Roller Plunger Actuator
Code :
NRK (small steel roller)
Chisel Plunger Actuator
Code : NDO
Ball Plunger Actuator
Code : NKO
Dome Plunger Actuator
Code : NWO
Roller Lever Arm
Code :
NHB (plastic roller)
NHS (steel roller)
Adj. Roller Lever Arm
Code :
NVB (plastic roller)
NVS (steel roller)
Rod Lever Arm
Code :
NSM (aluminium rod)
25
M3
25
M3
M3
25
M3
25
25
M3
25
M3
M3
25
14
3.2
8
36.5
3.7
54
.6
2.5
9.5
2.21.40.6
32
22
12 7
±0
.2
±0
.1
±0
.4
±0
.2
M3
25
20
For further details please contact :
TEKNIC EUCHNER ELECTRONICS PVT LTD703, MADHAVA , BANDRA KURLA COMPLEX, BANDRA (EAST) , MUMBAI 400051.
TEL : 022-26592392,26592393 FAX : 022-26592391 E-MAIL : [email protected], ELECTRONICS CITY, HOSUR ROAD, BANGALORE 560100.
TEL : 080-28520711,28520901. FAX : 080-28520900. E-MAIL : [email protected] : www.teknic.co.in
FM:MT:19Rev : A