sk d 20-o - raden.su · sk d 20-o din 8555 : mf 4-gf-60-s special alloy designed to deposit a tool...

2
SK D 20-O DIN 8555 : MF 4-GF-60-S Special alloy designed to deposit a tool steel and used for the repairs and fabrication of high-speed steel tools. DESCRIPTION 1 Cutting edges of carbon steel tool, cold shear blades, lathe tools, guides, milling cutter. SUITABLE FOR 2 TYPICAL CHEMICAL ANALYSIS (WEIGHT %) 3 C Mn Si Cr Mo Nb W V Fe 1.20 0.5 0.3 4.50 7.1 2.10 1.7 1 Bal. All Weld TYPICAL MECHANICAL PROPERTIES 4 Hardness as welded 60 HRC GENERAL CHARACTERISTICS 5 Precipitated fine carbides in a martensitic matrix Microstructure Grinding only Machinability Cannot be flame cut Oxy-acetylene cutting Depends upon application and procedure used Deposit thickness Flux cored The information about the products contained in the data sheets are based on intensive tests and careful investigations. However we can't assume any form of liability concerning the exactness of it. The information may be changed or updated without previous notice. The user is invited to test the product with regard to his own application and responsibility. Revision : 200508091546 @ SOUDOKAY SA RUE DE L'YSER 2 B-7180 SENEFFE BELGIUM soudokay soudokay.com soudokay.be www. | | | | | | SALES: +32 (0)64 51 02 25 +32 (0)64 51 02 21 | F LOGISTICS: +32 (0)64 51 02 10 +32 (0)64 51 02 19 | F FINANCE: +32 (0)64 52 00 30 +32 (0)64 52 00 31 | F T T T

Upload: hanhi

Post on 13-May-2018

212 views

Category:

Documents


0 download

TRANSCRIPT

SK D 20-ODIN 8555 : MF 4-GF-60-S

Special alloy designed to deposit a tool steel and used for the repairs and fabrication of high-speed steel tools.

DESCRIPTION1

Cutting edges of carbon steel tool, cold shear blades, lathe tools, guides, milling cutter.

SUITABLE FOR2

TYPICAL CHEMICAL ANALYSIS (WEIGHT %)3

C Mn Si Cr Mo Nb W V Fe

1.20 0.5 0.3 4.50 7.1 2.10 1.7 1 Bal.All Weld

TYPICAL MECHANICAL PROPERTIES4

Hardness as welded

60 HRC

GENERAL CHARACTERISTICS5

Precipitated fine carbides in a martensitic matrix���� Microstructure

Grinding only���� Machinability

Cannot be flame cut���� Oxy-acetylene cutting

Depends upon application and procedure used���� Deposit thickness

���� Flux cored

The information about the products contained in the data sheets are based on intensive tests and careful investigations. However we can't assume any form of liability concerning the exactness of it. The information may be changed or updated

without previous notice. The user is invited to test the product with regard to his own application and responsibility.

Revision : 200508091546

@SOUDOKAY SA RUE DE L'YSER 2 B-7180 SENEFFE BELGIUM soudokay soudokay.comsoudokay.be www.| | | | | |

SALES: +32 (0)64 51 02 25

+32 (0)64 51 02 21

|

F

LOGISTICS: +32 (0)64 51 02 10

+32 (0)64 51 02 19

|

F

FINANCE: +32 (0)64 52 00 30

+32 (0)64 52 00 31

|

F

T T T

SK D 20-ODIN 8555 : MF 4-GF-60-S

WELDING PARAMETERS & ECONOMICAL DATA6

Diameter[mm]

Article code

AvailabilityPackagingCurrent[A]

Voltage[V]

Stick-Out

1,6 180-200 26-30 35-40 29436 On request with minimal quantitySpool 15 Kg

2,4 250-300 26-30 35-40 29437 On request with minimal quantitySpool 15 Kg

2,8 300-350 26-30 35-40 41245 On request with minimal quantityCoil 25 Kg

The information about the products contained in the data sheets are based on intensive tests and careful investigations. However we can't assume any form of liability concerning the exactness of it. The information may be changed or updated

without previous notice. The user is invited to test the product with regard to his own application and responsibility.

Revision : 200508091546

@SOUDOKAY SA RUE DE L'YSER 2 B-7180 SENEFFE BELGIUM soudokay soudokay.comsoudokay.be www.| | | | | |

SALES: +32 (0)64 51 02 25

+32 (0)64 51 02 21

|

F

LOGISTICS: +32 (0)64 51 02 10

+32 (0)64 51 02 19

|

F

FINANCE: +32 (0)64 52 00 30

+32 (0)64 52 00 31

|

F

T T T