solar - sunfuel · solar pv modules this module is ideal for large commercial applications,...
TRANSCRIPT
www.sunfueltechnology.com
SOLAR PV MODULES & EPCSOLAR PV MODULES & EPC
ABOUT US 01
04-23
SOLAR PANEL MANUFACTURING 02Process of Solar Module Manufacturing
MODULES DATASHEET
Polycrystalline Solar PV Modules
72 cells (300-345)
72 cells (250-295)
72 cells (200-230)
60 cells (250-295)
36 cells (150-180)
36 cells (75-130)
36 cells (24-70)
Monocrystalline Solar PV Modules 72 cells (240-370)
60 cells (270-310)
36 cells (45-185)
OUR PROJECTS
MANUFACTURING TEAM
03 TECHNOLOGY
Testing Quality & Performance
Types of Solar panelsFeatures
24
25
We produce Solar PV Modules (Polycrystalline and Monocrystalline) with the Highest Energy Output & Unmatched Reliability. Our quality Product and Services includes Solar Panels, Lighting Systems, Power Packs and EPC. SunFuel makes Clean Energy available to Homeowners, Schools, Businesses, Commercial Buildings, Non-profits & GovernmentOrganizations at very Competitive Prices. SunFuel has a Global Team of Professionals with Expertise in Executing Design, Manufacturing & Distribution. We Deliver Perfection in every step from Designing, Engineering, Manufacturing, Supply, Execution to maintenance of Solar PV Systems ranging from few watts to Megawatts as per international standards (IEC, MNRE, ISO etc.)
IEC61215 | IEC61730-1&2 | IEC61701 | IEC62716 | ISO9001:2015 | ISO14001:2004 | OHSAS18001:2007
SUNFUEL is fully integrated Solar PV Module Manufacturing company with annual manufacturing capacity of 100 MW
ABOUT US
MNREApproved
Bureau of Indian Standards
01
SOLAR PANEL MANUFACTURING
Solar Photovoltaic Modules are manufactured by Laminating a pre assembled sandwich of Stringed cells, Glass , Eva and back
sheet. Cells are soldered in series/parallel to create a circuit to add up all the power in the individual cells and laminated to
provide strength to the glass sandwich.
PROCESS OF SOLAR PANELS MANUFACTURING£ IQC of Raw material£ Cell testing/Cell cutting £ Stringing£ Lay up / Bussing£ EL Testing£ Lamination£ Framing£ Sun simulator testing£ Final Quality check£ Packing
Aluminum Frame
GlassEncapsulant EVASolar CellsEncapsulant EVABacksheet
Junction box
Bureau of Indian Standards
02
£ Super BOM and super efficient cell for superb performance.
£ Positive tolerance & PID resistant.
£ IEC/MNRE approved.
£ Fully automated robotic manufacturing plant.
TECHNOLOGY
MONOCRYSTALLINEPOLYCRYSTALLINE
£ Damp heat test £ Thermal cycling test £ Humidity freeze test£ Potential induced degradation test£ Solar cells : Cell tester £ EVA : Gel content test and peel test
£ Junction box: IP 67 test£ RTV Silicone sealant : Adhesiveness test£ Electro luminescence test to detect micro cracks£ Ammonia test for anti-corrosion£ Glass: Fragmentation test£ Frame : Frame anodizing test
QUALITY & PERFORMANCE£ Screw less frame for high mechanical strength.£ Superior reliability with IP 67 protection in junction box, modules with a system voltage of 1,000 V DC.£ Greater than 17 micron anodization layer on aluminum frame to protect rusting of metal due to moisture and improve the
insulation of module.£ Glass with anti-reflective coating to improve light transmission.£ Salt mist, Ammonia, Blowing sand and Hail Tested.£ Ability to sustain heavy snow loads (2400 Pa & 5400 Pa).£ IP 67 rated MC4 compatible connectors.£ Excellent performance in low light.£ Sand & dust storm resistant.
TESTING
FEATURES
Years25Linear Power Warranty
45-370 W5-345 W CELLS : 18,36,60,72 CELLS : 36,60,72
03
TYPES OF SOLAR PANELS
POLY CRYSTALLINE 72 Cells | 300-345 WATTSOLAR PV MODULES
This module is ideal for large commercial applications, demonstrating financial astuteness and environmental stewardship.
Solar Power Modules System
SUNFUEL TECHNOLOGIES OFFERS THE BEST COMBINED POWER AND PRODUCT WARRANTY
*Refer to sunfuel’s warranty document for terms and conditions. .
SUNFUEL PRODUCT & LINEAR PERFORMANCE WARRANTY
Performance Warranty *
with 2.5% for 1st year degradation and 0.67% from year 2 to year 25
Product Warranty
10 YearsYears25
Linear Power Warranty
Sunfuel Industrial Standard
PRODUCT FEATURES
PIDFREE
POSITIVE POWER TOLERANCECount on sunfuel to deliver all the watts you pay for with a positive only power tolerance of +3%.
RELIABLE25-year l imited warrant y on power output and 10-year l imited warrant y on mater ia ls or workmanship.
5 BUSBAR TECHNOLOGY 5 BB technology provides low resistance path to the f low of electrons even in low l ight condit ions result ingbetter output power.
HIGH PERFORMANCEThis module uses an advanced surface texturing & ARC process to increase light absorption and improve efficiency.
PID RESISTANTEach Sunfuel module is manufactured in state of the art manufacturing environment using PID free raw material resulting high power output and less degradation.
LOW - LIGHT PERFORMANCEAnitmony Free low iron ARC textured glass and textured 5 BB solar cell combines together to perform excellent in Low Light conditions.
HIGH LOAD RESISTANTEach Sunfuel module withstand wind load (2400 Pa) and snow load (5400 Pa).
EL
ELECTROLUMINESCENCE TESTINGDual stage EL testing assures quality analysis by recognizing real time cell breakage, surface cracks and fissures of a micron scale.
Po
wer
Ou
tpu
t
£ On-grid large scale utility systems
£ On-grid rooftop residential, commercial and industrial roof top installations
£ Off-grid residential systems
£ Solar pumping applications
£ Solar E-rickshaw
APPLICATIONS
04
Individual packing, 2 modules in 1 BoxPACKAGING INFORMATION
ELECTRIC PARAMETERSElectrical Parameters at Standard Test Conditions (STC)
MODULES (SFTI)
Pmax (watts) (nominal)
Voltage at Pmax Vmp (V)
Current at Pmax Imp (A)
Open-circuit Voltage Voc (V)
Short Circuit Current Isc (A)
Module Efficiency (%)
Module Dimensions L x W x H (mm)
72P 300 72P 335 72P 34572P 34072P 33072P 32572P 32072P 31572P 31072P 305
300
37.23
8.06
43.56
8.57
15.43
1965x990x42
305
37.57
8.12
44.06
8.65
15.68
310
37.90
8.18
44.56
8.69
15.94
315
38.14
8.26
44.78
8.77
16.19
320
38.47
8.32
45.20
8.82
16.45
325
38.74
8.39
45.50
8.88
16.71
330
39.06
8.45
45.70
8.98
16.97
335
39.14
8.56
45.90
9.16
17.22
340
39.27
8.66
46.30
9.23
17.48
345
39.34
8.77
46.50
9.29
17.74
Solar Power Modules System
TECHNICAL DATA
DISCLAIMER : Specification included in the datasheet are subject to change without prior notice owing to continuos innovation on the Product Development and R&D activities. Sunfuel reserves the right to make any adjustment to the information.
Module Weight (kg) 22.0
X - Pitch (mm)
Y - Pitch (mm)
953
1000
Not
e: A
ll di
men
sion
s ar
e in
mm
onl
y
05
Junction Box
Application Class
Front Covers
Cells
Cell Encapsulant
Back Cover
Frame
Mounting Holes
CLASS A (Safety class II)
High transmission, low Iron, tempered glass
EVA (Ethylene Vinyl Acetate)
Anodized aluminium frame with twin wall profile
Mounting hole 4 nos. (oval shape (12mm x 9mm) and 6mm Grounding hole 2 nos.
TEMPERATURE COEFFICIENTSTc of Open Circuit Voltage (β)
Tc of Short Circuit Current (α)
Tc of Power (γ)
Maximum System Voltage (V)
NOCT(°C)
Temperature Range
- 0.32 ± 0.01 % /°C
0.03 ± 0.02% /°C
- 0.43 ± 0.02% /°C
1000 V
44 °C ± 2 °C
- 40 °C to + 85 °C
CONSTRUCTION MATERIALS TEMPERATURE COEFFICIENTIP 67, 4 Terminal with 3 bypass diodes
Composite film (Backsheet)
72 Nos., Polycrystalline
Back ViewSide View
Leng
th(L
)
Y-Pi
tch
X-Pitch
Width (W)Height
(H)
Dimensions
Front View
72 Cells | 250-295 WATTSOLAR PV MODULES
This module is ideal for large commercial applications, demonstrating financial astuteness and environmental stewardship.
Solar Power Modules System
SUNFUEL TECHNOLOGIES OFFERS THE BEST COMBINED POWER AND PRODUCT WARRANTY
SUNFUEL PRODUCT & LINEAR PERFORMANCE WARRANTY
Years
Performance Warranty *
with 2.5% for 1st year degradation and 0.67% from year 2 to year 25
Product Warranty
10 Years 25Linear Power Warranty
Sunfuel Industrial Standard
Po
wer
Ou
tpu
t
PRODUCT FEATURES
POLYCRYSTALLINE
£ On-grid large scale utility systems
£ On-grid rooftop residential, commercial and industrial roof top installations
£ Off-grid residential systems
£ Solar pumping applications
£ Solar E-rickshaw
APPLICATIONS
06*Refer to sunfuel’s warranty document for terms and conditions. .
PIDFREE
POSITIVE POWER TOLERANCECount on sunfuel to deliver all the watts you pay for with a positive only power tolerance of +3%.
RELIABLE25-year l imited warrant y on power output and 10-year l imited warrant y on mater ia ls or workmanship.
5 BUSBAR TECHNOLOGY 5 BB technology provides low resistance path to the f low of electrons even in low l ight condit ions result ingbetter output power.
HIGH PERFORMANCEThis module uses an advanced surface texturing & ARC process to increase light absorption and improve efficiency.
PID RESISTANTEach Sunfuel module is manufactured in state of the art manufacturing environment using PID free raw material resulting high power output and less degradation.
LOW - LIGHT PERFORMANCEAnitmony Free low iron ARC textured glass and textured 5 BB solar cell combines together to perform excellent in Low Light conditions.
HIGH LOAD RESISTANTEach Sunfuel module withstand wind load (2400 Pa) and snow load (5400 Pa).
EL
ELECTROLUMINESCENCE TESTINGDual stage EL testing assures quality analysis by recognizing real time cell breakage, surface cracks and fissures of a micron scale.
Individual packing, 2 modules in 1 BoxPACKAGING INFORMATION
Electrical Parameters at Standard Test Conditions (STC)
MODULES (SFTI)
Pmax (watts) (nominal)
Voltage at Pmax Vmp (V)
Current at Pmax Imp (A)
Open-circuit Voltage Voc (V)
Short Circuit Current Isc (A)
Module Efficiency (%)
Module Dimensions L x W x H (mm)
Module Weight (kg)
72P 250 72P 28072P 27572P 27072P 26572P 26072P 255
260
37.91
6.86
44.57
7.28
15.97
265
38.36
6.91
44.93
7.35
16.28
270
38.69
6.98
45.29
7.43
16.58
275
39.01
7.05
45.50
7.54
16.89
280
39.27
7.13
45.86
7.63
250
37.21
6.72
43.56
7.15
15.35
255
37.61
6.78
44.06
7.21
15.66 17.19
72P 285
285
39.54
7.21
46.32
7.71
17.51
72P 290
290
39.41
7.36
46.70
7.75
17.81
72P 295
295
39.50
7.47
46.90
7.80
18.12
1645 x 990 x 35
18.20
DISCLAIMER: Specification included in the datasheet are subject to change without prior notice owing to continuos innovation on the Product Development and R&D activities. Sunfuel reserves the right to make any adjustment to the information.
Solar Power Modules System
TECHNICAL DATA
X - Pitch (mm)
Y - Pitch (mm)
947
800
Not
e: A
ll di
men
sion
s ar
e in
mm
onl
y
07
ELECTRIC PARAMETERS
Junction Box
Application Class
Front Covers
Cells
Cell Encapsulant
Back Cover
Frame
Mounting Holes
CLASS A (Safety class II)
High transmission, low Iron, tempered glass
EVA (Ethylene Vinyl Acetate)
Anodized aluminium frame with twin wall profile
Mounting hole 4 nos. (oval shape (12mm x 9mm) and 6mm Grounding hole 2 nos.
TEMPERATURE COEFFICIENTSTc of Open Circuit Voltage (β)
Tc of Short Circuit Current (α)
Tc of Power (γ)
Maximum System Voltage (V)
NOCT(°C)
Temperature Range
- 0.32 ± 0.01 % /°C
0.03 ± 0.02% /°C
- 0.43 ± 0.02% /°C
1000 V
44 °C ± 2 °C
- 40 °C to + 85 °C
CONSTRUCTION MATERIALS TEMPERATURE COEFFICIENTIP 67, 4 Terminal with 3 bypass diodes
Composite film (Backsheet)
72 Nos., Polycrystalline
Back ViewSide View
Leng
th(L
)
Y-Pi
tch
X-Pitch
Width (W)Height
(H)
Dimensions
Front View
72 Cells | 200-230 WATTSOLAR PV MODULES
This module is ideal for large commercial applications, demonstrating financial astuteness and environmental stewardship.
Solar Power Modules System
SUNFUEL TECHNOLOGIES OFFERS THE BEST COMBINED POWER AND PRODUCT WARRANTY
SUNFUEL PRODUCT & LINEAR PERFORMANCE WARRANTY
Years
Performance Warranty *
with 2.5% for 1st year degradation and 0.67% from year 2 to year 25
Product Warranty
10 Years 25Linear Power Warranty
Sunfuel Industrial Standard
Po
wer
Ou
tpu
t
PRODUCT FEATURES
POLYCRYSTALLINE
£ On-grid large scale utility systems
£ On-grid rooftop residential, commercial and industrial roof top installations
£ Off-grid residential systems
£ Solar pumping applications
£ Solar E-rickshaw
APPLICATIONS
08*Refer to sunfuel’s warranty document for terms and conditions. .
PIDFREE
POSITIVE POWER TOLERANCECount on sunfuel to deliver all the watts you pay for with a positive only power tolerance of +3%.
RELIABLE25-year l imited warrant y on power output and 10-year l imited warrant y on mater ia ls or workmanship.
5 BUSBAR TECHNOLOGY 5 BB technology provides low resistance path to the f low of electrons even in low l ight condit ions result ingbetter output power.
HIGH PERFORMANCEThis module uses an advanced surface texturing & ARC process to increase light absorption and improve efficiency.
PID RESISTANTEach Sunfuel module is manufactured in state of the art manufacturing environment using PID free raw material resulting high power output and less degradation.
LOW - LIGHT PERFORMANCEAnitmony Free low iron ARC textured glass and textured 5 BB solar cell combines together to perform excellent in Low Light conditions.
HIGH LOAD RESISTANTEach Sunfuel module withstand wind load (2400 Pa) and snow load (5400 Pa).
EL
ELECTROLUMINESCENCE TESTINGDual stage EL testing assures quality analysis by recognizing real time cell breakage, surface cracks and fissures of a micron scale.
Individual packing, 2 modules in 1 BoxPACKAGING INFORMATION
DISCLAIMER: Specification included in the datasheet are subject to change without prior notice owing to continuos innovation on the Product Development and R&D activities. Sunfuel reserves the right to make any adjustment to the information.
Electrical Parameters at Standard Test Conditions (STC)
MODULES (SFTI)
Pmax (watts) (nominal)
Voltage at Pmax Vmp (V)
Current at Pmax Imp (A)
Open-circuit Voltage Voc (V)
Short Circuit Current Isc (A)
Module Efficiency (%)
Module Weight (kg)
72P 200
200
37.25
5.37
43.70
5.73
16.04
72P 205
205
37.69
5.44
44.26
5.78
16.44
72P 210
210
38.12
5.51
44.78
5.86
15.89
14.8
72P 215
215
38.53
5.58
45.25
5.93
16.27
72P 220
220
38.95
5.65
45.75
6.00
16.65
72P 225
225
39.34
5.72
46.05
6.10
17.03
72P 230
230
39.25
5.86
46.30
6.21
17.40
Solar Power Modules System
TECHNICAL DATA
Junction Box
Application Class
Front Covers
Cells
Cell Encapsulant
Back Cover
Frame
Mounting Holes
CLASS A (Safety class II)
High transmission, low Iron, tempered glass
EVA (Ethylene Vinyl Acetate)
Anodized aluminium frame with twin wall profile
Mounting hole 4 nos. (oval shape (12mm x 9mm) and 6mm Grounding hole 2 nos.
TEMPERATURE COEFFICIENTSTc of Open Circuit Voltage (β)
Tc of Short Circuit Current (α)
Tc of Power (γ)
Maximum System Voltage (V)
NOCT(°C)
Temperature Range
- 0.32 ± 0.01 % /°C
0.03 ± 0.02% /°C
- 0.43 ± 0.02% /°C
1000 V
44 °C ± 2 °C
- 40 °C to + 85 °C
CONSTRUCTION MATERIALS TEMPERATURE COEFFICIENTIP 67, 4 Terminal with 3 bypass diodes
Module Dimensions L x W x H (mm) 1340 x 990 x 35
X - Pitch (mm)
Y - Pitch (mm)
947
670
1260 x 990 x 35
13.0
630
947
Not
e: A
ll di
men
sion
s ar
e in
mm
onl
y
09
ELECTRIC PARAMETERS
Composite film (Backsheet)
72 Nos., Polycrystalline
Back ViewSide View
Leng
th(L
)
Y-Pi
tch
X-Pitch
Width (W)Height
(H)
Dimensions
Front View
60 Cells | 250-295 WATTSOLAR PV MODULES
This module is ideal for large commercial applications, demonstrating financial astuteness and environmental stewardship.
Solar Power Modules System
SUNFUEL TECHNOLOGIES OFFERS THE BEST COMBINED POWER AND PRODUCT WARRANTY
SUNFUEL PRODUCT & LINEAR PERFORMANCE WARRANTY
Years
Performance Warranty *
with 2.5% for 1st year degradation and 0.67% from year 2 to year 25
Product Warranty
10 Years 25Linear Power Warranty
Sunfuel Industrial Standard
Po
wer
Ou
tpu
t
PRODUCT FEATURES
POLYCRYSTALLINE
£ On-grid large scale utility systems
£ On-grid rooftop residential, commercial and industrial roof top installations
£ Off-grid residential systems
£ Solar pumping applications
£ Solar E-rickshaw
APPLICATIONS
10*Refer to sunfuel’s warranty document for terms and conditions. .
PIDFREE
POSITIVE POWER TOLERANCECount on sunfuel to deliver all the watts you pay for with a positive only power tolerance of +3%.
RELIABLE25-year l imited warrant y on power output and 10-year l imited warrant y on mater ia ls or workmanship.
5 BUSBAR TECHNOLOGY 5 BB technology provides low resistance path to the f low of electrons even in low l ight condit ions result ingbetter output power.
HIGH PERFORMANCEThis module uses an advanced surface texturing & ARC process to increase light absorption and improve efficiency.
PID RESISTANTEach Sunfuel module is manufactured in state of the art manufacturing environment using PID free raw material resulting high power output and less degradation.
LOW - LIGHT PERFORMANCEAnitmony Free low iron ARC textured glass and textured 5 BB solar cell combines together to perform excellent in Low Light conditions.
HIGH LOAD RESISTANTEach Sunfuel module withstand wind load (2400 Pa) and snow load (5400 Pa).
EL
ELECTROLUMINESCENCE TESTINGDual stage EL testing assures quality analysis by recognizing real time cell breakage, surface cracks and fissures of a micron scale.
TECHNICAL DATASolar Power Modules System
Electrical Parameters at Standard Test Conditions (STC)
MODULES (SFTI)
Pmax (watts) (nominal)
Voltage at Pmax Vmp (V)
Current at Pmax Imp (A)
Open-circuit Voltage Voc (V)
Short Circuit Current Isc (A)
Module Efficiency (%)
60P 250
250
31.02
8.06
36.30
8.58
15.35
60P 260
260
31.33
8.14
36.72
8.65
15.66
60P 255
255
31.60
8.23
37.14
8.73
15.97
60P 265
265
31.97
8.29
37.44
8.82
16.27
60P 270
270
32.26
8.37
37.74
8.92
16.58
60P 275
275
32.51
8.46
37.92
9.05
16.89
60P 280
280
32.72
8.56
38.22
9.15
17.20
60P 285
285
32.76
8.70
38.60
9.26
17.50
60P 290
290
32.81
8.84
38.92
9.34
17.81
60P 295
295
32.89
8.97
39.08
9.41
18.12
Individual packing, 2 modules in 1 BoxPACKAGING INFORMATION
Junction Box
Application Class
Front Covers
Cells
Cell Encapsulant
Back Cover
Frame
Mounting Holes
CLASS A (Safety class II)
High transmission, low Iron, tempered glass
60 Nos., Polycrystalline
EVA (Ethylene Vinyl Acetate)
Anodized aluminium frame with twin wall profile
Mounting hole 4 nos. (oval shape (12mm x 9mm) and 6mm Grounding hole 2 nos.
TEMPERATURE COEFFICIENTSTc of Open Circuit Voltage (β)
Tc of Short Circuit Current (α)
Tc of Power (γ)
Maximum System Voltage (V)
NOCT(°C)
Temperature Range
- 0.32 ± 0.01 % /°C
0.03 ± 0.02% /°C
- 0.43 ± 0.02% /°C
1000 V
44 °C ± 2 °C
- 40 °C to + 85 °C
CONSTRUCTION MATERIALS TEMPERATURE COEFFICIENTIP 67, 4 Terminal with 3 bypass diodes
DISCLAIMER: Specification included in the datasheet are subject to change without prior notice owing to continuos innovation on the Product Development and R&D activities. Sunfuel reserves the right to make any adjustment to the information.
TECHNICAL DATA
Module Weight (kg) 18.20
Module Dimensions L x W x H (mm) 1645 x 990 x 35
947
800
X - Pitch (mm)
Y - Pitch (mm)
Not
e: A
ll di
men
sion
s ar
e in
mm
onl
y
11
ELECTRIC PARAMETERS
Composite film (Backsheet)
Front ViewSide View
Leng
th(L
)
Y-Pi
tch
X-Pitch
Width (W)Height
(H)
Dimensions
Back ViewSide View
Leng
th(L
)
Y-Pi
tch
X-Pitch
Width (W)Height
(H)
Dimensions
Front View
POLYCRYSTALLINE 36 Cells | 150-180 WATTSOLAR PV MODULES
This module is ideal for Solar Power packs applications, demonstrating financial astuteness and environmental stewardship.
Solar Power Modules System
£ Off-grid residential systems
£ Solar street light applications
£ Domestic Lighting System
£ Railway Signaling
APPLICATIONS
SUNFUEL TECHNOLOGIES OFFERS THE BEST COMBINED POWER AND PRODUCT WARRANTY
SUNFUEL PRODUCT & LINEAR PERFORMANCE WARRANTY
Years
Performance Warranty *
with 2.5% for 1st year degradation and 0.67% from year 2 to year 25
Product Warranty
5 Years 25Linear Power Warranty
Sunfuel Industrial Standard
Po
wer
Ou
tpu
t
PRODUCT FEATURES
12*Refer to sunfuel’s warranty document for terms and conditions. .
PIDFREE
POSITIVE POWER TOLERANCECount on sunfuel to deliver all the watts you pay for with a positive only power tolerance of +3%.
RELIABLE25-year l imited warrant y on power output and 5-year l imited warrant y on mater ia ls or workmanship.
5 BUSBAR TECHNOLOGY 5 BB technology provides low resistance path to the f low of electrons even in low l ight condit ions result ingbetter output power.
HIGH PERFORMANCEThis module uses an advanced surface texturing & ARC process to increase light absorption and improve efficiency.
PID RESISTANTEach Sunfuel module is manufactured in state of the art manufacturing environment using PID free raw material resulting high power output and less degradation.
LOW - LIGHT PERFORMANCEAnitmony Free low iron ARC textured glass and textured 5 BB solar cell combines together to perform excellent in Low Light conditions.
HIGH LOAD RESISTANTEach Sunfuel module withstand wind load (2400 Pa) and snow load (5400 Pa).
EL
ELECTROLUMINESCENCE TESTINGDual stage EL testing assures quality analysis by recognizing real time cell breakage, surface cracks and fissures of a micron scale.
Individual packing, 5 modules in 1 master cartonPACKAGING INFORMATION
Junction Box
Application Class
Front Covers
Cells
Cell Encapsulant
Back Cover
Frame
Mounting Holes
CLASS A (Safety class II)
High transmission, low Iron, tempered glass
36 Nos., Polycrystalline
EVA (Ethylene Vinyl Acetate)
Anodized aluminium frame with twin wall profile
Mounting hole 4 nos. (oval shape (12mm x 9mm) and 6mm Grounding hole 2 nos.
TEMPERATURE COEFFICIENTSTc of Open Circuit Voltage (β)
Tc of Short Circuit Current (α)
Tc of Power (γ)
Maximum System Voltage (V)
NOCT(°C)
Temperature Range
- 0.32 ± 0.01 % /°C
0.03 ± 0.02% /°C
- 0.43 ± 0.02% /°C
1000 V
44 °C ± 2 °C
- 40 °C to + 85 °C
CONSTRUCTION MATERIALS TEMPERATURE COEFFICIENT
DISCLAIMER: Specification included in the datasheet are subject to change without prior notice owing to continuos innovation on the Product Development and R&D activities. Sunfuel reserves the right to make any adjustment to the information.
Electrical Parameters at Standard Test Conditions (STC)
MODULES (SFTI)
Pmax (watts) (nominal)
Voltage at Pmax Vmp (V)
Current at Pmax Imp (A)
Open-circuit Voltage Voc (V)
Short Circuit Current Isc (A)
Module Efficiency (%)
36P 150 36P 155 36P 160 36P 165 36P 170 36P 175
TECHNICAL DATASolar Power Modules System
TECHNICAL DATA
150
18.62
8.06
21.80
8.59
15.15
155
18.95
8.18
22.15
8.73
15.64
160
19.19
8.34
22.54
8.84
16.15
165
19.51
8.46
22.85
8.95
16.66
170
19.48
8.73
23.15
9.25
17.16
175 180
19.71 19.78
8.88 9.10
23.35 23.55
9.35 9.48
17.66 18.17
1490 x 665 x 35
Module Weight (kg)
Module Dimensions L x W x H (mm)
11.00
745
36P 180
632X - Pitch (mm)
Y - Pitch (mm)
13
IP 65, 3 Terminal with 2 bypass diodes
ELECTRIC PARAMETERS
Composite film (Backsheet)
Not
e: A
ll di
men
sion
s ar
e in
mm
onl
y
Front View
Front ViewSide View
Leng
th(L
)
Y-Pi
tch
X-Pitch
Width (W)Height
(H)
Dimensions
Back ViewSide View
Leng
th(L
)
Y-Pi
tch
X-Pitch
Width (W)Height
(H)
Dimensions
36 Cells | 75-130 WATTSOLAR PV MODULES
Solar Power Modules System
£ Off-grid residential systems
£ Solar street light applications
£ Domestic Lighting System
£ Railway Signaling
APPLICATIONS
SUNFUEL TECHNOLOGIES OFFERS THE BEST COMBINED POWER AND PRODUCT WARRANTY
SUNFUEL PRODUCT & LINEAR PERFORMANCE WARRANTY
Years
Performance Warranty *
with 2.5% for 1st year degradation and 0.67% from year 2 to year 25
Product Warranty
5 Years 25Linear Power Warranty
Sunfuel Industrial Standard
Po
wer
Ou
tpu
t
PRODUCT FEATURES
POLYCRYSTALLINE
14*Refer to sunfuel’s warranty document for terms and conditions. .
This module is ideal for Solar Power packs applications, demonstrating financial astuteness and environmental stewardship.
PIDFREE
POSITIVE POWER TOLERANCECount on sunfuel to deliver all the watts you pay for with a positive only power tolerance of +3%.
RELIABLE25-year l imited warrant y on power output and 5-year l imited warrant y on mater ia ls or workmanship.
5 BUSBAR TECHNOLOGY 5 BB technology provides low resistance path to the f low of electrons even in low l ight condit ions result ingbetter output power.
HIGH PERFORMANCEThis module uses an advanced surface texturing & ARC process to increase light absorption and improve efficiency.
PID RESISTANTEach Sunfuel module is manufactured in state of the art manufacturing environment using PID free raw material resulting high power output and less degradation.
LOW - LIGHT PERFORMANCEAnitmony Free low iron ARC textured glass and textured 5 BB solar cell combines together to perform excellent in Low Light conditions.
HIGH LOAD RESISTANTEach Sunfuel module withstand wind load (2400 Pa) and snow load (5400 Pa).
EL
ELECTROLUMINESCENCE TESTINGDual stage EL testing assures quality analysis by recognizing real time cell breakage, surface cracks and fissures of a micron scale.
Individual packing, 5 modules in 1 master cartonPACKAGING INFORMATION
Junction Box
Application Class
Front Covers
Cells
Cell Encapsulant
Back Cover
Frame
Mounting Holes
CLASS A (Safety class II)
High transmission, low Iron, tempered glass
36 Nos., Polycrystalline
EVA (Ethylene Vinyl Acetate)
Anodized aluminium frame with twin wall profile
Mounting hole 4 nos. (oval shape (12mm x 9mm) and 6mm Grounding hole 2 nos.
TEMPERATURE COEFFICIENTSTc of Open Circuit Voltage (β)
Tc of Short Circuit Current (α)
Tc of Power (γ)
Maximum System Voltage (V)
NOCT(°C)
Temperature Range
- 0.32 ± 0.01 % /°C
0.03 ± 0.02% /°C
- 0.43 ± 0.02% /°C
1000 V
44 °C ± 2 °C
- 40 °C to + 85 °C
CONSTRUCTION MATERIALS TEMPERATURE COEFFICIENT
DISCLAIMER: Specification included in the datasheet are subject to change without prior notice owing to continuos innovation on the Product Development and R&D activities. Sunfuel reserves the right to make any adjustment to the information.
Electrical Parameters at Standard Test Conditions (STC)
MODULES (SFTI)
Pmax (watts) (nominal)
Voltage at Pmax Vmp (V)
Current at Pmax Imp (A)
Open-circuit Voltage Voc (V)
Short Circuit Current Isc (A)
Module Efficiency (%)
36P 75 36P 80 36P 85 36P 100 36P 105 36P 110 36P 115 36P 120 36P 125 36P 130
Module Weight (kg)
TECHNICAL DATASolar Power Modules System
TECHNICAL DATA
75
18.62
4.03
21.80
4.30
14.37
Module Dimensions L x W x H (mm)
632632 632
392.5
5.8
80
19.19
4.17
22.54
4.42
15.33
785 x 665 x 35
85
19.55
4.35
23.10
4.60
16.29
100
18.60
5.38
21.75
5.75
15.67
510
7.6
105
19.10
5.50
22.40
5.85
16.46
110
19.48
5.65
22.90
5.98
16.23
115
19.63
5.86
23.25
6.17
16.96
120
567.5
8.5
19.20
6.25
22.60
6.63
15.90
130
19.85
6.55
23.40
6.93
17.23
125
19.66
6.36
23.00
6.78
16.57
1020 X 665 X 35 1135 x 665 x 35
X - Pitch (mm)
Y - Pitch (mm)
15
IP 65, 2 Terminal / 3 Terminal with 2 bypass diodes
ELECTRIC PARAMETERS
Composite film (Backsheet)
Not
e: A
ll di
men
sion
s ar
e in
mm
onl
y
Front View
Front ViewSide View
Leng
th(L
)
Y-Pi
tch
X-Pitch
Width (W)Height
(H)
Dimensions
Back ViewSide View
Leng
th(L
)
Y-Pi
tch
X-Pitch
Width (W)Height
(H)
Dimensions
POLYCRYSTALLINE 36 Cells | 24-70 WATTSOLAR PV MODULES
Solar Power Modules System
£ Off-grid residential systems
£ Solar street light applications
£ Domestic Lighting System
£ Railway Signaling
£ Wi-Fi Towers
APPLICATIONS
SUNFUEL TECHNOLOGIES OFFERS THE BEST COMBINED POWER AND PRODUCT WARRANTY
SUNFUEL PRODUCT & LINEAR PERFORMANCE WARRANTY
Years
Performance Warranty *
with 2.5% for 1st year degradation and 0.67% from year 2 to year 25
Product Warranty
5 Years 25Linear Power Warranty
Sunfuel Industrial Standard
Po
wer
Ou
tpu
t
PRODUCT FEATURES
16*Refer to sunfuel’s warranty document for terms and conditions. .
This module is ideal for Solar Power packs applications, demonstrating financial astuteness and environmental stewardship.
PIDFREE
POSITIVE POWER TOLERANCECount on sunfuel to deliver all the watts you pay for with a positive only power tolerance of +3%.
RELIABLE25-year l imited warrant y on power output and 5-year l imited warrant y on mater ia ls or workmanship.
5 BUSBAR TECHNOLOGY 5 BB technology provides low resistance path to the f low of electrons even in low l ight condit ions result ingbetter output power.
HIGH PERFORMANCEThis module uses an advanced surface texturing & ARC process to increase light absorption and improve efficiency.
PID RESISTANTEach Sunfuel module is manufactured in state of the art manufacturing environment using PID free raw material resulting high power output and less degradation.
LOW - LIGHT PERFORMANCEAnitmony Free low iron ARC textured glass and textured 5 BB solar cell combines together to perform excellent in Low Light conditions.
HIGH LOAD RESISTANTEach Sunfuel module withstand wind load (2400 Pa) and snow load (5400 Pa).
EL
ELECTROLUMINESCENCE TESTINGDual stage EL testing assures quality analysis by recognizing real time cell breakage, surface cracks and fissures of a micron scale.
Junction Box
Application Class
Front Covers
Cells
Cell Encapsulant
Back Cover
Frame
Mounting Holes
CLASS A (Safety class II)
High transmission, low Iron, tempered glass
36 Nos., Polycrystalline
EVA (Ethylene Vinyl Acetate)
Anodized aluminium frame with twin wall profile
Mounting hole 4 nos. (oval shape (12mm x 9mm) and 6mm Grounding hole 2 nos.
TEMPERATURE COEFFICIENTSTc of Open Circuit Voltage (β)
Tc of Short Circuit Current (α)
Tc of Power (γ)
Maximum System Voltage (V)
NOCT(°C)
Temperature Range
- 0.32 ± 0.01 % /°C
0.03 ± 0.02% /°C
- 0.43 ± 0.02% /°C
1000 V
44 °C ± 2 °C
- 40 °C to + 85 °C
CONSTRUCTION MATERIALS TEMPERATURE COEFFICIENT
DISCLAIMER: Specification included in the datasheet are subject to change without prior notice owing to continuos innovation on the Product Development and R&D activities. Sunfuel reserves the right to make any adjustment to the information.
Electrical Parameters at Standard Test Conditions (STC)
MODULES (SFTI)
Pmax (watts) (nominal)
Voltage at Pmax Vmp (V)
Current at Pmax Imp (A)
Open-circuit Voltage Voc (V)
Short Circuit Current Isc (A)
Module Efficiency (%)
36P 24 36P 25 36P 30 36P 37 36P 40 36P 50 36P 55 36P 60 36P 65 36P 70
Module Weight (kg)
24
632 632632320
2.25
19.20
1.25
22.40
1.35
15.24
25
19.25
1.30
22.60
1.40
10.75
30
18.60
1.62
21.78
1.72
12.95
37
18.52
2.00
21.75
2.12
12.95
215
3.32
40
19.25
2.08
22.50
2.22
14.00
50
18.62
2.69
21.90
2.85
13.69
55
19.52
2.82
22.86
3.00
15.05
275
4.2
706560
18.60 19.01 19.45
3.23 3.42 3.60
21.78 22.39 23.10
3.45 3.64 3.84
14.93 14.70 15.83
332.5
5
TECHNICAL DATASolar Power Modules System
TECHNICAL DATA
Individual packing, 5 modules in 1 master cartonPACKAGING INFORMATION
Module Dimensions L x W x H (mm) 350 x 665 x 22 430 x 665 x 35 550 x 665 x 35 665 x 665 x 35
X - Pitch (mm)
Y - Pitch (mm) 332.5
605x665x35
4.8
302.5
17
IP 65, 2 Terminal
ELECTRIC PARAMETERS
Composite film (Backsheet)
Not
e: A
ll di
men
sion
s ar
e in
mm
onl
y
Front View
Front ViewSide View
Leng
th(L
)
Y-Pi
tch
X-Pitch
Width (W)Height
(H)
Dimensions
Back ViewSide View
Leng
th(L
)
Y-Pi
tch
X-Pitch
Width (W)Height
(H)
Dimensions
SOLAR PV MODULES
This module is ideal for large commercial applications, demonstrating financial astuteness and environmental stewardship.
Solar Power Modules System
SUNFUEL TECHNOLOGIES OFFERS THE BEST COMBINED POWER AND PRODUCT WARRANTY
SUNFUEL PRODUCT & LINEAR PERFORMANCE WARRANTY
Years
Performance Warranty *
with 2.5% for 1st year degradation and 0.67% from year 2 to year 25
Product Warranty
10 Years 25Linear Power Warranty
Sunfuel Industrial Standard
Po
wer
Ou
tpu
t
PRODUCT FEATURES
MONOCRYSTALLINE 72 Cells | 240-370 WATT
£ On-grid large scale utility systems
£ On-grid rooftop residential, commercial and industrial roof top installations
£ Off-grid residential systems
£ Solar pumping applications
£ Solar E-rickshaw
APPLICATIONS
18*Refer to sunfuel’s warranty document for terms and conditions. .
PIDFREE
POSITIVE POWER TOLERANCECount on sunfuel to deliver all the watts you pay for with a positive only power tolerance of +3%.
RELIABLE25-year l imited warrant y on power output and 10-year l imited warrant y on mater ia ls or workmanship.
5 BUSBAR TECHNOLOGY 5 BB technology provides low resistance path to the f low of electrons even in low l ight condit ions result ingbetter output power.
HIGH PERFORMANCEThis module uses an advanced surface texturing & ARC process to increase light absorption and improve efficiency.
PID RESISTANTEach Sunfuel module is manufactured in state of the art manufacturing environment using PID free raw material resulting high power output and less degradation.
LOW - LIGHT PERFORMANCEAnitmony Free low iron ARC textured glass and textured 5 BB solar cell combines together to perform excellent in Low Light conditions.
HIGH LOAD RESISTANTEach Sunfuel module withstand wind load (2400 Pa) and snow load (5400 Pa).
EL
ELECTROLUMINESCENCE TESTINGDual stage EL testing assures quality analysis by recognizing real time cell breakage, surface cracks and fissures of a micron scale.
Junction Box
Application Class
Front Covers
Cells
Cell Encapsulant
Back Cover
Frame
Mounting Holes
CLASS A (Safety class II)
High transmission, low Iron, tempered glass
72 Nos., Monocrystalline
EVA (Ethylene Vinyl Acetate)
Anodized aluminium frame with twin wall profile
Mounting hole 4 nos. (oval shape (12mm x 9mm) and 6mm Grounding hole 2 nos.
TEMPERATURE COEFFICIENTSTc of Open Circuit Voltage (β)
Tc of Short Circuit Current (α)
Tc of Power (γ)
Maximum System Voltage (V)
NOCT(°C)
Temperature Range
- 0.32 ± 0.01 % /°C
0.03 ± 0.02% /°C
- 0.43 ± 0.02% /°C
1000 V
44 °C ± 2 °C
- 40 °C to + 85 °C
CONSTRUCTION MATERIALS TEMPERATURE COEFFICIENT
DISCLAIMER: Specification included in the datasheet are subject to change without prior notice owing to continuos innovation on the Product Development and R&D activities. Sunfuel reserves the right to make any adjustment to the information.
Electrical Parameters at Standard Test Conditions (STC)
MODULES (SFTI)
Pmax (watts) (nominal)
Voltage at Pmax Vmp (V)
Current at Pmax Imp (A)
Open-circuit Voltage Voc (V)
Short Circuit Current Isc (A)
Module Efficiency (%)
TECHNICAL DATASolar Power Modules System
TECHNICAL DATA
2 Modules in 1 BoxPACKAGING INFORMATION
72M 240 72M 245 72M 250
IP67, 4 Terminal with 3 bypass diodes
240
39.90
6.02
46.51
6.36
18.10
245
40.32
6.08
47.09
6.41
18.48
250
40.79
6.13
47.59
6.45
18.85
72M 300 72M 310
300
39.90
7.52
46.51
7.95
18.43
310
40.62
7.63
47.40
8.04
19.04
330
38.11
8.66
44.56
9.20
16.97
340
38.48
8.84
44.91
9.31
17.49
72M 360
360
39.89
9.03
46.51
9.53
18.51
72M 365
365
40.07
9.11
46.94
9.61
18.76
72M 330 72M 370
370
40.44
9.15
47.16
9.64
19.02
72M 340
Module Dimensions L x W x H (mm)
Module Weight (kg)
1340 x 990 x 35
14.8
1645 x 990 x 35
18.20
1965 x 990 x 40
22.0
X - Pitch (mm)
Y - Pitch (mm)
947 947
670 800 1000
953
19
ELECTRIC PARAMETERS
Composite film (Backsheet)
Back ViewSide View
Leng
th(L
)
Y-Pi
tch
X-Pitch
Width (W)Height
(H)
Dimensions
Not
e: A
ll di
men
sion
s ar
e in
mm
onl
y
Front View
60 Cells | 270-310 WATTSOLAR PV MODULES
This module is ideal for large commercial applications, demonstrating financial astuteness and environmental stewardship.
Solar Power Modules System
SUNFUEL TECHNOLOGIES OFFERS THE BEST COMBINED POWER AND PRODUCT WARRANTY
SUNFUEL PRODUCT & LINEAR PERFORMANCE WARRANTY
Years
Performance Warranty *
with 2.5% for 1st year degradation and 0.67% from year 2 to year 25
Product Warranty
10 Years 25Linear Power Warranty
Sunfuel Industrial Standard
Po
wer
Ou
tpu
t
PRODUCT FEATURES
MONOCRYSTALLINE
£ On-grid large scale utility systems
£ On-grid rooftop residential, commercial and industrial roof top installations
£ Off-grid residential systems
£ Solar pumping applications
£ Solar E-rickshaw
APPLICATIONS
20*Refer to sunfuel’s warranty document for terms and conditions. .
PIDFREE
POSITIVE POWER TOLERANCECount on sunfuel to deliver all the watts you pay for with a positive only power tolerance of +3%.
RELIABLE25-year l imited warrant y on power output and 10-year l imited warrant y on mater ia ls or workmanship.
5 BUSBAR TECHNOLOGY 5 BB technology provides low resistance path to the f low of electrons even in low l ight condit ions result ingbetter output power.
HIGH PERFORMANCEThis module uses an advanced surface texturing & ARC process to increase light absorption and improve efficiency.
PID RESISTANTEach Sunfuel module is manufactured in state of the art manufacturing environment using PID free raw material resulting high power output and less degradation.
LOW - LIGHT PERFORMANCEAnitmony Free low iron ARC textured glass and textured 5 BB solar cell combines together to perform excellent in Low Light conditions.
HIGH LOAD RESISTANTEach Sunfuel module withstand wind load (2400 Pa) and snow load (5400 Pa).
EL
ELECTROLUMINESCENCE TESTINGDual stage EL testing assures quality analysis by recognizing real time cell breakage, surface cracks and fissures of a micron scale.
Junction Box
Application Class
Front Covers
Cells
Cell Encapsulant
Back Cover
Frame
Mounting Holes
CLASS A (Safety class II)
High transmission, low Iron, tempered glass
60 Nos., Monocrystalline
EVA (Ethylene Vinyl Acetate)
Anodized aluminium frame with twin wall profile
Mounting hole 4 nos. (oval shape (12mm x 9mm) and 6mm Grounding hole 2 nos.
TEMPERATURE COEFFICIENTSTc of Open Circuit Voltage (β)
Tc of Short Circuit Current (α)
Tc of Power (γ)
Maximum System Voltage (V)
NOCT(°C)
Temperature Range
- 0.32 ± 0.01 % /°C
0.03 ± 0.02% /°C
- 0.43 ± 0.02% /°C
1000 V
44 °C ± 2 °C
- 40 °C to + 85 °C
CONSTRUCTION MATERIALS TEMPERATURE COEFFICIENT
DISCLAIMER: Specification included in the datasheet are subject to change without prior notice owing to continuos innovation on the Product Development and R&D activities. Sunfuel reserves the right to make any adjustment to the information.
Electrical Parameters at Standard Test Conditions (STC)
MODULES (SFTI)
Pmax (watts) (nominal)
Voltage at Pmax Vmp (V)
Current at Pmax Imp (A)
Open-circuit Voltage Voc (V)
Short Circuit Current Isc (A)
Module Efficiency (%)
TECHNICAL DATASolar Power Modules System
TECHNICAL DATA
2 Modules in 1 BoxPACKAGING INFORMATION
IP67, 4 Terminal with 3 bypass diodes
33.45
9.12
39.12
9.61
18.73
60M 310
310
33.85
9.16
39.50
9.65
19.04
60M 305
305
60M 30060M 270 60M 275 60M 280
300
33.25
9.03
38.76
9.53
18.43
270
31.47
8.58
36.96
9.11
16.58
275
31.80
8.65
37.13
9.15
16.89
31.97
8.76
37.31
9.25
17.20
280
Module Dimensions L x W x H (mm)
Module Weight (kg)
1645 x 990 x 35
18.20
800
947X - Pitch (mm)
Y - Pitch (mm)
22
ELECTRIC PARAMETERS
Composite film (Backsheet)
Not
e: A
ll di
men
sion
s ar
e in
mm
onl
y
Back ViewSide View
Leng
th(L
)
Y-Pi
tch
X-Pitch
Width (W)Height
(H)
Dimensions
Front View
36 Cells | 45-185 WATTSOLAR PV MODULES
Solar Power Modules System
£ Off-grid residential systems
£ Solar street light applications
£ Domestic Lighting System
£ Railway Signaling
APPLICATIONS
SUNFUEL TECHNOLOGIES OFFERS THE BEST COMBINED POWER AND PRODUCT WARRANTY
SUNFUEL PRODUCT & LINEAR PERFORMANCE WARRANTY
Years
Performance Warranty *
with 2.5% for 1st year degradation and 0.67% from year 2 to year 25
Product Warranty
5 Years 25Linear Power Warranty
Sunfuel Industrial Standard
Po
wer
Ou
tpu
t
MONOCRYSTALLINE
PRODUCT FEATURES
23*Refer to sunfuel’s warranty document for terms and conditions. .
This module is ideal for Solar Power packs applications, demonstrating financial astuteness and environmental stewardship.
PIDFREE
POSITIVE POWER TOLERANCECount on sunfuel to deliver all the watts you pay for with a positive only power tolerance of +3%.
RELIABLE25-year l imited warrant y on power output and 5-year l imited warrant y on mater ia ls or workmanship.
5 BUSBAR TECHNOLOGY 5 BB technology provides low resistance path to the f low of electrons even in low l ight condit ions result ingbetter output power.
HIGH PERFORMANCEThis module uses an advanced surface texturing & ARC process to increase light absorption and improve efficiency.
PID RESISTANTEach Sunfuel module is manufactured in state of the art manufacturing environment using PID free raw material resulting high power output and less degradation.
LOW - LIGHT PERFORMANCEAnitmony Free low iron ARC textured glass and textured 5 BB solar cell combines together to perform excellent in Low Light conditions.
HIGH LOAD RESISTANTEach Sunfuel module withstand wind load (2400 Pa) and snow load (5400 Pa).
EL
ELECTROLUMINESCENCE TESTINGDual stage EL testing assures quality analysis by recognizing real time cell breakage, surface cracks and fissures of a micron scale.
Junction Box
Application Class
Front Covers
Cells
Cell Encapsulant
Back Cover
Frame
Mounting Holes
CLASS A (Safety class II)
High transmission, low Iron, tempered glass
36 Nos., Monocrystalline
EVA (Ethylene Vinyl Acetate)
Anodized aluminium frame with twin wall profile
Mounting hole 4 nos. (oval shape (12mm x 9mm) and 6mm Grounding hole 2 nos.
TEMPERATURE COEFFICIENTSTc of Open Circuit Voltage (β)
Tc of Short Circuit Current (α)
Tc of Power (γ)
Maximum System Voltage (V)
NOCT(°C)
Temperature Range
- 0.32 ± 0.01 % /°C
0.03 ± 0.02% /°C
- 0.43 ± 0.02% /°C
1000 V
44 °C ± 2 °C
- 40 °C to + 85 °C
CONSTRUCTION MATERIALS TEMPERATURE COEFFICIENTIP 65, 2 Terminal / 3 Terminal with 2 bypass diodes
DISCLAIMER: Specification included in the datasheet are subject to change without prior notice owing to continuos innovation on the Product Development and R&D activities. Sunfuel reserves the right to make any adjustment to the information.
Electrical Parameters at Standard Test Conditions (STC)
MODULES (SFTI)
Pmax (watts) (nominal)
Voltage at Pmax Vmp (V)
Current at Pmax Imp (A)
Open-circuit Voltage Voc (V)
Short Circuit Current Isc (A)
Module Efficiency (%)
Module Weight (kg)
TECHNICAL DATASolar Power Modules System
TECHNICAL DATA
Front View
Not
e: A
ll di
men
sion
s ar
e in
mm
onl
y
Individual packing, 5 modules in 1 master cartonPACKAGING INFORMATION
36M 45 36M 60 36M 75 36M 90 36M 120 36M 125 36M 135 36M 140 36M 180 36M 185
430x665x35
45
20.00
2.25
23.36
2.40
15.74
Module Dimensions L x W x H (mm)
215
3.0
60
20.00
3.00
23.33
3.19
16.40
275
4.2
550x665x35
75
19.95
3.76
23.26
3.95
16.96
332.5
5.0
665x665x35
90
19.96
4.51
23.26
4.77
17.24
392.5
5.8
785x665x35 1020x665x35
120
19.95
6.02
23.26
6.36
17.70
125
20.40
6.13
23.80
6.45
18.44
632632632 632 632
510
7.6
1135x665x35
135
19.95
6.77
23.26
7.15
17.89
140
20.39
6.87
23.76
7.25
18.56
567.5
8.5
1490 X 665 X 35
180
19.95
9.03
23.26
9.53
18.17
185
20.22
9.15
23.58
9.64
18.67
745
11
X - Pitch (mm)
Y - Pitch (mm)
24
ELECTRIC PARAMETERS
Composite film (Backsheet)
Back ViewSide View
Leng
th(L
)
Y-Pi
tch
X-Pitch
Width (W)Height
(H)
Dimensions
OUR PROJECTS
25
MANUFACTURING TEAM
26
Factory Address - Plot No. 525,
Phase II Barhi Industrial Area, HSIIDC,
Haryana - 131101, India
Corporate Office - 47A, LU Block,
DDA Market, Local Shopping Complex
Pitampura, New Delhi - 110088, India
+91-11-47552447
Email - [email protected]
www.sunfueltechnology.comINDIA | USA | NIGERIA | UAE
TOLL FREE 1800-3131-299