Speed-Mount™ Switch Boxes

Crouse-HindsTraining Module

Speed-Mount™ Switch Boxes

OutlineApplications

Product Features & Benefits

Installation Information

Certifications and Compliances

Catalog Numbers

Marketing Materials

Speed-Mount™ Switch Boxes

Cooper Crouse-Hinds nonmetallic Speed-Mount™ Switchboxes are used:

•In branch circuit wiring as a splice point

•To mount wiring devices such as switches, receptacles, GFCI’s, dimmers etc.

•To provide mechanical protection for wiring systems and electrical devices

Applications

Speed-Mount™ Switch Boxes

Product Features• Available for use with wood or metal stud

• Quick entry feature on single and multi gang boxes offers labor savings, no need to break out knockouts – simply push the nonmetallic cable into the box

• Unique configuration of this quick entry feature on single gang boxes provides a self-feeding feature that eliminates the need to reach inside the box to pull the wire out.

Speed-Mount™ Switch Boxes

Features• Integral labor saving clamping feature on two, three & four gang boxes.

•The multiple gang box unique quick entry serves as a clamp, eliminates the need to mechanically secure the cable inside box no separate clamps or screws to install or tighten.

Speed-Mount™ Switch Boxes

•Speed-Mount™ Switchboxes offer simple, labor saving press installation of devices. The device is attached by simply pressing the device mounting screw into the device hole and turning the screw to lock it in place. The spring steel clip locks the screw securely in place.

•Re-Usable: To remove the device, simply unthread in a traditional manner

Features

Attach device by pressing mounting screw into device hole

Turn screw to lock in place

Speed-Mount™ Switch Boxes

Installation Information

For Wood Studs:

Speed-Mount™ switchboxes are supplied with nails for mounting to wood studs.

Two molded-in locator ribs help align the box on the stud keeping the box parallel to the stud and help insure correct mounting depth for a smooth professional appearance in the sheet rock.

Two, three and four gang boxes also have, on the non-mounting side of the box, integral molded dry wall stops to ensure the box remains parallel to the dry wall for smooth professional appearance.

Speed-Mount™ Switch Boxes

For Steel Studs:

Speed-Mount™ switchboxes designed for use withsteel studs have an integral molded face bracket for attachment to steel studs.

Face bracket screw holes are countersunk to ensure a flush screw installation and eliminate the potential for sheet rock bulge.

Single, two, three and four gang steel stud boxes also haveintegral dry wall stops on the non-mounting side of the box to ensure the box remains parallel to the dry wall for smooth professional appearance.

Speed-Mount™ ™ Switch Boxes

The Far Side Support is designed for use with Speed-Mount™ Switch Boxes used with either wood or metal studs to provide a quick easy economical way for far side support

Multi-gang Speed-Mount™ boxes have a molded-in-hole in the back for attaching the TPFSS. The TPFSS is designed for use with steel studs with a depth of 3-5/8”. For use with 2x4 wood studs, simply break off the tip at the notch of the TPFSS using a pair of pliers.

TPFSS

Speed-Mount™ Switch Boxes

Certifications and Compliances

•UL Listed: File No. E102328

• UL Classified for use in fire rated (2 HR) wall or ceiling: File #R9933

Materials:

• PVC – Polyvinyl Chloride compound

Speed-Mount™ Switch BoxesCatalog Numbers

Description Cubic Capacity

For Wood Studs

For Steel Studs

Single gang box 18.0 TP1802 TP1832

Single gang box 20.0* TP2002 TP2332

Single gang box 22.5 TP2302

2 gang box 36.0 TP3602 TP3632

3 gang box 54.0 TP4602 TP4632

4 gang box 72.0 TP6102 TP6132

*P&S does not offer a 20 cubic inch box!

Speed-Mount™ Switch BoxesMarketing Materials & Sales Tools

Commercial Products Catalog

Commercial Products Pocket Guide

Commercial Products Cross Reference

Non-Metallic Product Brochure

Speed-Mount™ Counter Display

Samples

www.crouse-hinds.com