standard for pump performance and quality… to 100 litres per second discharge. australia wide...
TRANSCRIPT
Distributed by…
Form 2723A May 2005As Tyco policy is one of constant improvement, we reserve the right to make specification changes without notice and without incurring liability.
“STAR-LINE” CENTRIFUGALMOTORPUMPS
SIMPLE SERVICINGBack-Pull-Out and
Assembly
Southern Cross “Star-Line”Motorpumps offer time and cost savingadvantages during servicing. Pumpbody, with suction and discharge linesattached, remains undisturbed duringback-pull-out and reassembly. Thecomplications of flexible couplingdisassembly and realignmentassociated with long coupled pumpunits are also totally eliminated .
APPLICATIONS
● Designed for efficient and reliable general purpose water transfer in industry, building services andirrigation.
FEATURES● Space saving design
● Superior hydraulic design & manufacturing methods produce significantly higher efficiencies for lowerrunning costs and reduced maintenance.
● Australian designed and manufactured.
● Up to 100 litres persecond discharge.
● Australia wide serviceand backup.
● 32 to 125mm discharge.
● Wide range of options.
● Heads to 160 metres.
“STAR-LINE” CENTRIFUGALMOTORPUMPS
“STAR-LINE”PUMP MOUNTING
Wells and other restricted areas are no problem forSouthern Cross “Star-Line” Motorpumps. Mountingis simple and efficient in all applications.
“STAR-LINE”SPACE SAVING
A substantial cost saving feature of Southern Cross“Star-Line” Motorpumps is the reduced spacerequirement over conventional long coupled centrifugalpump units. In building design plantroomspace can be reduced substantially forbig savings on floor area.Where space isalready limited“Star-Line”Motorpumps providea space saving andeconomical solution.
SPACESAVING
…setting thestandard for pumpperformance and quality…
A.B.N. 83 000 922 690A division of Flow Control Pacific Pty Ltd
Ph: 131 786e-mail: [email protected]
web: www.tycoflowcontrol.com.au
Australian madeto…
ISO 2858International Standard
2 YEAR WARRANTY
“STAR-LINE” CENTRIFUGALMOTORPUMPS
“STAR-LINE” CENTRIFUGALMOTORPUMPS
…setting the standardfor pump performance
and quality…REDUCED RUNNING COSTSSuperior hydraulic design and high technology manufacturingmethods produce significantly higher efficiencies for lesspower consumption and minimum maintenance …featureswhich guarantee Southern Cross “Star-Line” Motorpumpusers continuing savings in all applications.
GENERAL-PURPOSE PUMPSSouthern Cross “Star-Line” Motorpumps offer top efficiencyand reliability for a full range of general purpose watertransfer applications in industry, building services andirrigation.
INTERNATIONAL STANDARDConforming with ISO2858 Standard means dimensionalinterchangeability with other makes of pumps, manufacturedto the same international standard, however because ofdesign superiority Southern Cross “Star-Line” Motorpumpsexceed the performance standard.
“ISO Star-Line” FEATURESThese Australian designed and manufactured SouthernCross “Star-Line” Motorpumps are readily available in a fullrange of sizes, backed not only by an Australia wide serviceand spare parts network, but with an extensive group ofinternational stock and service centres.
Special design features of Southern Cross“Star-Line” Motorpumps include the use ofstandard off-the-shelf foot and flanged electricmotors with highly accurate clamp on shaftextensions; taper mounted and keyedimpeller for easy removal from shaft duringservicing and positive locking duringoperation; heavy duty stainless steel shaftextension for safe operation at high speed;AS1830/T260 cast iron volute for addedsafety; reusable “O” ring body seal;hydraulically and dynamically balancedimpellers; and highly efficient suctionperformance from double curvature impellervanes.
● STANDARD FEATURES
Type 316 stainless steel shaft extension;S.G. cast iron motor shaft clamp; TEFC IP55motor; rugged cast iron volute with integralsuction and discharge flanges and mountingfeet; pressure rated to 1600kPa (160 metreshead); cast iron impeller and backplate;stainless steel impeller nut; rigid cast ironbell housing connects motor and pumphousing; and single mechanical seal.
● OPTIONAL MATERIALS
Zinc-free bronze impeller and Molybondcoating.
● OPTIONAL EXTRASZinc-free bronze wear rings for impeller,volute and backplate; optional singlemechanical seals; opt ional motorspecifications and classes; works certifiedand witnessed tests for guaranteedperformance; impeller turn-downs; andpressed or welded steel baseplates.
● MAXIMUMOPERATING TEMP.
Maximum pumped liquid temperature forSouthern Cross “Star-Line” Motorpumps is100°C using standard seals. Liquids up to140°C can be handled using special seals…consult Southern Cross Customer ServiceUnit for further information.
PUMP SELECTION GUIDE
VOLUMETRIC FLOW RATE
VOLUMETRIC FLOW RATE
IGPM 50 100 150 250 500 1,000 1,500
TOTA
L H
EAD
IN M
ETR
ES
L/SEC 3 4 5 6 8 10 20 30 40 50 70 100 150
M3/HR 10 20 30 50 100 150 250 500
USGPM 50 100 150 250 500 1,000 1,500
TOTA
L H
EAD
IN F
EET
200
150
100
80
6050
40
30
20
15
600
500
400
300
200
150
100
50
2900R.P.M.(NominalSpeed)
TOTA
L H
EAD
IN M
ETR
ES
L/SEC 3 4 5 6 8 10 20 30 40 50 70 100 150
USGPM 50 100 150 250 500 1,000 1,500
TOTA
L H
EAD
IN F
EET
80
6050
40
30
20
10
8
65
4
200
100
50
40
30
20
15
IGPM 50 100 150 250 500 1,000 1,500
1450 R.P.M.(Nominal Speed)
MEA50x32-1602.2-5.5kW MEB
65x50-1604-7.5kW
MED100x80-16011-18.5kW
MEC80x65-1605.5-15kW
MFA50x32-2005.5-11kW
MFB 65x40 -200 7.5-15 kW
MFC80x50-20011-22kW
MFD100x65-20018.5-37kW MFE
125x80 -200 22-45
MGB65x40-25011-30kW
MGC80x50-25022-45kW
MGD100x65-250
30-75kW MGE125x80
-250 45-90 kW
MFF 125x100 -200 30- 75kW
MGF 125x100
-250 55- 110 kW
MHB65x40-31522-45kW
MHC80x50-31530-75kW
MHD100x65-31555-110kW
MHE125x80-31575-132kW MHF
125x100-31590-132kW
MEA50x32-160
0.55-0.75kWMEB
65x50-1600.55-1.1
kW
MED100x80-160
1.1-3kW
MEC80x65-160
0.75-1.5kW
MFA50x32-2000.75-1.5kW
MFB 65x40 -200 1.1-2.2 kW
MFC80x50-2001.5-3kW
MFD100x65-2002.2-5.5kW MFE
125x80 -200 3-7.5 kW
MFF 125x 100 -200 4- 7.5 kW
MGB65x40-2501.5-3kW
MGD100x65-250 4-7.5kW MGE
125x80-250
5.5-11 kW
MGF 125x100
-250 7.5-
15
MGG 150x125
-25011-22 kW
MGC80x50-250
3-5.5kW
MHB65x40-3153-5.5kW
MHC80x50-3154-7.5kW
MHD100x65-315 7.5-15kW
MHE 125x80 -315 11- 18.5
MHG 150x125 -315 18.5-45 kW
MJE125x80-400
15-30kW MJG150x125-400
37-55kW
MJF 125x100 -400 22-45kW
MHF 125x 100 -315 11-22 kW
M3/HR 10 20 30 50 100 150 250 500
PUMP CONSTRUCTION FEATURES…SUPERIOR HYDRAULIC DESIGNFOR GREATER PERFORMANCEAND REDUCED RUNNING COSTS
STANDARD FLANGED, FOOTMOUNTED ELECTRIC MOTOR
RIGID CAST IRON BELLHOUSING ACCURATELYALIGNS MOTOR AND PUMP
MOTOR SHAFT
SEPARATE BACKPLATE FOREASY PUMP SERVICING
STURDY MOUNTING FEET CASTINTEGRAL WITH PUMP BODY
TAPPED CONNECTIONFOR PRESSURE
GAUGE
FLANGES TO AS2129TABLE “E” OPTIONAL
DRILLINGS ON REQUEST
TAPPED AND PLUGGEDVOLUTE DRAIN HOLE
MECHANICALSHAFT SEAL
HEAVY DUTYSTAINLESS STEEL
SHAFT EXTENSION
TAPPED CONNECTIONFOR SUCTION GAUGE
TAPER MOUNTED ANDKEYED IMPELLER FOR
EASY REMOVAL ANDPOSITIVE LOCKING
REUSABLE “O”RING SEAL
BETWEEN PUMPVOLUTE ANDBACKPLATE